BD's High RPM Mechanical Governor & Delivery Valve Kits can give you the power and torque you've been looking for. The High RPM Mechanical Governor Kit increases the Cummins engine speed to 3,000 or 4,000 rpm, reducing gear shifting and providing a new high-end horsepower levels. The Delivery Valve Kit yields optimum pump output without replacing plungers and barrels. These kits replace key components in the P7100 Bosch pump on 1994-1998 Dodge-Cummins applications and as such are not for a home install! All modifications must be done by a qualified pump technician otherwise damage could result, excessive heat/smoke could be generated and/or poor performance may occur.

• Designed and engineered to enhance the middle and high end throttle response and enable more power thru the entire throttle range
• Only trained, qualified technicians with working knowledge of P7100 pumps should perform these upgrades
• Designed/Engineered To Enhance Middle/High End Throttle Response
• Only to be Installed by Qualified P7100 Technician
• 12 Month Or 12000 Mile Warranty

This Part Fits:

Aeromotive Inc. is a true high performance aftermarket manufacturer specializing in fuel delivery and fuel delivery components. Utilizing aerospace tolerances and procedures, three generations of track experience, and a meticulous approach to engineering, Aeromotive Fuel Systems has become the absolute pinnacle of performance fuel delivery.

Skunk2's cutting-edge Composite Fuel Rail for the 06-11 Civic Si is here. Skunk2's Composite Fuel Rails are made using a proprietary carbon-impregnated, aerospace thermo-polymer composite—a material that's 33-percent lighter, 60-percent stronger, and operates up to 100-degrees F cooler when compared to aluminum and insulates fuel from both radiant and conductive heat transfer underneath the hood, resulting in increased horsepower and torque. Composite Fuel Rails also feature large 0.625- in. internal bores for superior fuel injector pulsation dampening, are machined with a smooth interior finish, and feature radius-cut fuel injector outlets for improved flow characteristics. The special design that eliminates the sharp internal angles where the main bore meets the fuel injector bores inherent with conventional extruded- and drilled-aluminum designs can only be achieved with such composite materials. Skunk2's K-series Composite Fuel Rails are compatible with the factory fuel system, as well as all fuels, including alcohol, and can support up to 1,200 hp, with gains as high as three percent realized during testing.

• Integrated -8 AN Inlet/Outlet For Easily Customized Fuel Lines
• Features Additional 1/8-in. NPT Fuel Pressure Ports
• Supports Up To 1200 HP

This Part Fits:

DeatschWerks, LLC provides high-performance fuel system solutions for the automotive aftermarket. Located in Oklahoma City, OK, DW houses all of the company?s functions including design, end-manufacturing, quality assurance, sales, marketing, and administration in its 36,000sf facility. DeatschWerks? roots were established in 2004 by offering high flow drop-in fitment fuel injectors. In 2009 DW expanded into fuel pumps with the DW300, the highest flowing in-tank fuel pump of its time. Since then, DW has developed a wide range of innovative fuel system components which include in-tank and in-line pumps, surge tanks, fuel rails, fuel filters, pressure regulators, and fuel-specific lines, fittings, and adaptors. Today, the DeatschWerks line-up of fuel system components includes over 800 SKU?s covering Sport Compact, Modern Muscle, Euro, and Powersport applications.

This Part Fits:

Vibrant Performance Inline Oil and Fuel Filter Sets are manufactured from 6061 Aluminum Alloy. Their compact design makes them easy to install in even the tightest of spaces. We include both Male and Female adapters for ultimate flexibility for the installer. We also include a 30 micron, 80 micron and 150 micron filter element, allowing you to use them with a wide variety of flowing media. The 30 micron filter is best suited for lightweight engine oils and pump gas. The 80 micron filter is recommended for heavier weight oil, alcohol and ethanol fuels. The 150 micron element is ideal for power steering and transmission oil. Available in Anodized Black only.

• One Year Limited Warranty
• 6061 Aluminum Alloy

This Part Fits:

Omix proudly offers all the parts you need to keep your Jeep running like new with quality standards that always meet or exceed those of the factory part. This replacement coolant overflow reservoir fits 07-11 Wrangler JK models equipped with 3.8-liter engines. Includes bottle, tethered cap and inlet hose. Replaces OE 55056542AE

• Original Equipment Replacement
• Limited 5 Year Warranty
• Direct Fit
• Plastic

This Part Fits:

Fuel Injector Top Hat; Top Short 11mm Adapter Hat; Aluminum; Male 11mm; Height 25mm; Converts 14mm Top To 11mm Top;

• 12.5mm Extension Length
• 14mm O-Ring Female End
• 11mm O-Ring Male End
• 24mm Overall Length

Fuelab 8AN High Flow One Way Check Valve - 350 GPH

Ready to upgrade your factory under bed fuel filtration on your 2017 – 2024 Ford 6.7L Powerstroke? The latest OEM+ solution from Fleece Performance is a true drop-in" upgrade to the furnace style filtration that requires absolutely no modification of your existing fuel lines or routing of new fuel lines! Direct Drop-In The new filter assembly mounts in the same location as the factory filter housing and mates directly to all factory fuel lines for the absolute cleanest installation on the market. The kit retains full functionality of the factory WIF circuitry and mates directly to the chassis harness while allowing you to convert to a convenient spin-on style filter. Improved Filter Performance The Donaldson P553203 offers improved efficiency (99%) at low micron levels (4 micron) vs. the stock filter while ensuring peak water separation performance. Fuel Heater Capable Cold climate owners we have you covered! Our optional fuel heater is available for all models including Cab & Chassis. Easily installs into the side of the filter base for full fuel flow heating prior to the filter. Learn more: Fuel heater and harness for 17+ Fleece filter base (FPE-FH-FMC-1724) - pickup truck models. Fuel heater extension harness for 17+ Fleece filter base on C&C applications (FPE-FH-FMC-1724-CC-EXT) – required for use in conjunction with FPE-FH-FMC-1724.

• Improved Filter Performance
• Fuel Heater Capable
• Direct Drop-In

This Part Fits:

The plastic factory injector return connector on the 2017-2024 6.7L Power Stroke is susceptible to breakage from heat, vibration, rough handling and frequent disconnections for fuel filter maintenance. Upgrade your injector return fitting and eliminate the risk of a broken fuel line with our heavy duty billet aluminum injector return fitting. Featuring a dual O-ring internal design and serviceable barb fitting the Fleece Performance injector return fitting will ensure you're not left stranded with a broken, non-repairable fuel line. Our 5-pack kit for fleets and servicing outlets also includes our fitting service kit (FPE-FMC-FF-RLK-1724-SER) to perform a quick repair if necessary during filter maintenance. Kit includes: Quantity 5 - FPE-FMC-FF-RLK-1724 Quantity 1 - FPE-FMC-FF-RLK-1724-SER Features Heavy duty, machined billet aluminum housing. Dual O-ring internal design for increased sealing. Serviceable billet aluminum barb fitting. Easy to install and remove during filter maintenance Application Notes This kit is designed to work with both OEM and aftermarket under hood fuel filter assemblies including Fleece Performance P/N: FPE-FMC-UHFA-1123. A service kit is available for this product, Fleece Performance P/N: FPE-FMC-FF-RLK-1724-SER. The kit includes replacement O-rings and locking tabs. A replacement barb fitting is available for this product, Fleece Performance P/N: FPE-AN4-332B.

• Easy to install and remove during filter maintenance
• Dual O-ring internal design for increased sealing
• Heavy duty, machined billet aluminum housing
• Serviceable billet aluminum barb fitting

This Part Fits:

Replacement high pressure fuel lines from Fleece Performance. These are a direct replacement for your cracked, broken, or leaking injector lines. This kit includes a complete set of 8 lines. Application Notes Replaces GM Part# 97378825 (qty 2) Replaces GM Part# 97378828 (qty 2) Replaces GM Part# 97378826 (qty 2) Replaces GM Part# 97378827 (qty 2)

This Part Fits:

The Donaldson P553203 Fuel Filter is a direct replacement filter for the Fleece L5P Duramax Fuel Filter Kits and 1998.5-2018 Dodge Ram Cummins Auxiliary Fuel Filter Kits. The filter is rated at 3 microns. This case quantity includes 12 filters. Fitment: FPE-L5P-FFBA-1719 FPE-L5P-FFBA-1920 FPE-34783 FPE-34780

Brand new Bosch CP3 for the 2006-2010 Duramax from Fleece Performance! Direct drop in replacement for stock injection pump. Pump include a new snout O-ring APPLICATION NOTE: The fuel pressure regulator will need to be scaled appropriately when installed in a 2001-2005 (LB7 or LLY)You can get the values here.

This Part Fits:

Auxiliary fuel filter and line kit for your 1998.5-2002 Dodge Cummins. The kit includes everything you need to properly route, plumb and filter fuel for your VP engine from the tank to the VP44. Kit includes: Donaldson 3 micron fuel filter and water separator (Donaldson P/N P553207) Filter base with integral mounting Distribution filter block / filter coupler Push Lock hose and all necessary AN and barb fittingsApplication NotesFor 1998.5-1999 model year Ram trucks a new chassis-side fuel heater connector pigtail is required. Use Fleece Performance part number FPE-HAR-CUMM-FH-PT.

This Part Fits:

Aeromotive Inc. is a true high performance aftermarket manufacturer specializing in fuel delivery and fuel delivery components. Utilizing aerospace tolerances and procedures, three generations of track experience, and a meticulous approach to engineering, Aeromotive Fuel Systems has become the absolute pinnacle of performance fuel delivery.

This Part Fits:

TI Automotive is the builder of the most popular fuel pumps and modules for over 60 years under the Walbro brand name. We value this heritage and are proud to continue our legacy of reliability, performance and first-time fit. TI Automotive fuel pumps, fuel pump kits, module assemblies, filters and accessories deliver the feed you need for the power you demand. These products deliver unquestioned fuel flow across a wide pressure range to support outrageous horsepower. TI Automotive fuel pumps are available for in-tank or in-line needs across a variety of fuels featuring the award winning 39/50 in-tank pump and the GSS line featuring the popular 255LPH pump. They deliver high-pressure, high flow performance for engines with more than 500hp. Pump kits, filters and accessories are available to help you with your installation needs and are designed as direct-fit replacements. Our products are engineered to win through decades of technical expertise and by settling for nothing less than superior hot fuel performance. Proudly union made in TI Automotive?s Caro, Michigan plant across 5 fuel pump and 14 modules assembly lines. Our fuel pumps and modules are never manufactured or assembled by a third party or sourced from an outside company. Fluid Thinking shapes the mindset of TI Automotive.

• Pump UAW manufactured in Caro, MI USA