Protect the vulnerable undercarriage of your 2017-2023 Toyota Tacoma with the Artec Industries Full Skid Plate System. This comprehensive armor package replaces thin factory guards with heavy-duty protection designed to withstand direct impacts from rocks and trail obstacles that can cause catastrophic damage to drivetrain and suspension components.

• Vehicle Fitment: Specifically engineered for 2017-2023 Toyota Tacoma 3rd Gen models.
• A-Arm Protection: Guards the front lower control arms from debris and helps the suspension slide over obstacles rather than snagging.
• Full Bellypan: Provides continuous coverage for the engine, transmission, and transfer case, minimizing the risk of punctures or casing cracks.
• Fuel Tank Skid: A dedicated shield for the fuel tank, ensuring your fuel supply remains secure during technical crawls.
• High-Clearance Design: CNC-cut and formed to follow the chassis lines, maintaining maximum ground clearance while providing a smooth sliding surface.

Each component is designed for precise fitment using existing mounting points where possible, ensuring a secure installation that provides the peace of mind needed for serious off-roading.

Fits 2005-2023 Ford F-250 and F-350 Super Duty models.

The Artec Industries Low Profile Front Truss provides critical reinforcement for your truck's front axle housing. Heavy tires and aggressive off-road use can place immense stress on factory axle tubes, leading to permanent bending or housing distortion. This truss is engineered to bridge those weak points, providing a rigid backbone that strengthens the entire assembly without compromising space. Its low-profile design is specifically developed to maintain necessary clearance for suspension travel and engine components.

• Specifically designed for 2005-2023 Ford Super Duty F-250 and F-350 axles
• Reinforces the axle tubes to prevent bending under high-stress conditions
• Low-profile geometry for improved clearance with oil pans and suspension components
• Heavy-duty construction suitable for trucks with oversized tires or off-road builds

Fits 2007-2018 Jeep Wrangler JK and JKU models equipped with 2005 and newer Ford Super Duty axle swaps.

This Artec Industries steering kit is engineered for high-clearance, heavy-duty performance when running 2005+ Super Duty axles on a Jeep JK platform. By utilizing 7075-T6 aluminum, this kit provides a superior strength-to-weight ratio compared to traditional steel. The inherent memory of 7075 aluminum allows the drag link and tie rod to flex under extreme impact and return to their original straight form, preventing permanent bends that often occur with DOM tubing in technical rock crawling environments.

• Specifically designed for 2005+ Ford Super Duty axle conversions in Jeep JK/JKU
• Constructed from high-tensile 7075-T6 aluminum for maximum durability
• Resilient material properties allow steering links to flex and snap back to shape
• Heavy-duty drag link and tie rod configuration
• Corrosion-resistant material maintains a clean finish in harsh conditions

Fits select 2020-2025 Jeep Wrangler Sahara and Gladiator JT models.

The Artec Industries Apex Rear Axle Truss is engineered to provide critical reinforcement to your vehicle's rear axle housing. Off-road driving with larger tires and heavy gear places immense stress on the axle tubes, which can lead to bending or structural failure over time. This truss distributes those loads across the housing, ensuring your drivetrain remains aligned and intact during high-articulation maneuvers and heavy impacts.

Constructed from heavy-duty steel and CNC laser-cut for a precise fit, the Apex series features a low-profile design that maximizes clearance for suspension components and floor pans. This weld-on component is essential for owners looking to bridge the gap between factory strength and the demands of technical rock crawling or high-speed desert trails.

• Precision CNC laser-cut steel construction for exact fitment
• Low-profile Apex design maintains maximum suspension clearance
• Reinforces axle tubes to prevent bending under load
• Integrates with factory mounting points for a clean installation
• Designed for 2020-2025 Jeep Wrangler Sahara and Gladiator JT applications
• Requires professional welding for installation

Fits 1997-2006 Jeep Wrangler TJ.

The Artec Industries 8.8 Swap Kit with Truss is engineered to facilitate the installation of a Ford 8.8 rear axle into your Jeep TJ. This kit solves the common challenge of adapting the 8.8 housing to the TJ's factory suspension geometry. The included truss strengthens the axle assembly, providing a rigid backbone that protects against housing distortion and tube rotation during off-road maneuvers.

• Complete bracketry solution for a Ford 8.8 axle swap
• Integrated heavy-duty truss design for superior axle housing reinforcement
• Maintains proper suspension mounting points for the Jeep TJ platform
• Designed specifically for 1997-2006 Jeep Wrangler TJ models
• Provides a much stronger alternative to the factory Dana 35 rear end

Fits 2017-2023 Toyota Tacoma models (3rd Gen).

The Artec Industries Bellypan Skid Plate provides critical underbody protection for your truck's mid-section. Engineered to shield the transmission and transfer case area from impacts, this bellypan is an essential upgrade for off-roaders navigating rocky terrain or technical trails where factory shielding is often insufficient. It provides a smooth surface to slide over obstacles, preventing snagging or damage to vital drivetrain components.

• Specifically designed for 2017-2023 Toyota Tacoma (3G) platforms
• Shields the central undercarriage from rocks, stumps, and trail debris
• High-clearance design maintains maximum breakover angle
• Heavy-duty construction for superior impact resistance compared to stock components

Fits 2021-2025 Jeep Wrangler JLU 4xe.

Protect your Jeep's vulnerable undercarriage from trail obstacles with the Artec Industries Engine Oil Skid Plate. This heavy-duty armor is designed specifically for the JLU 4xe platform, providing critical coverage for the engine oil pan where factory protection is often insufficient. To streamline routine maintenance, this skid plate features a built-in oil door, allowing you to perform oil changes without the labor-intensive process of removing the entire skid system.

• Specifically engineered for 2021-2025 Jeep Wrangler JLU 4xe models
• Integrated oil door provides easy access for maintenance without skid removal
• Provides heavy-duty protection against rocks, stumps, and debris
• Designed to maintain maximum ground clearance for off-road performance
• Direct fitment for the engine oil pan area

Maximize the utility of your storage system with the Artec Industries GearUp Cargo Rack Single Shelf Accessory. This modular component is engineered to integrate seamlessly with the GearUp rack series, providing a secondary tier for organizing recovery gear, tool bags, and trail essentials. By utilizing vertical space within your cargo area, this shelf prevents gear from shifting and keeps smaller items accessible without sacrificing floor space for larger equipment.

• Modular expansion designed specifically for Artec GearUp Cargo Racks
• Optimizes cargo organization by adding a dedicated upper platform
• Precision-engineered for a secure fit within the existing rack framework
• Ideal for separating frequently used gear from heavy cargo
• Artec Industries Quality Construction

Fits 2018-2020 Jeep Wrangler JL Sahara 4-Door (3.6L).

Shield your undercarriage from trail damage with the Artec Industries Full Bellypan. Engineered for the 4-door Jeep Wrangler JL Sahara, this skid plate system provides comprehensive protection for critical driveline components, including the engine oil pan, transmission, and transfer case. The aluminum construction offers a superior strength-to-weight ratio, ensuring heavy-duty impact resistance without the significant weight penalty of steel armor.

This bellypan features a dedicated oil door, allowing for routine maintenance and oil changes without the need to remove the entire skid plate assembly. The design maintains high ground clearance while providing a smooth surface to slide over obstacles.

• Full underbody protection for engine, transmission, and transfer case
• Lightweight, high-strength aluminum construction
• Integrated oil door for easy maintenance access
• Specifically designed for 4-door Sahara trim levels
• Application: 2018-2020 Jeep Wrangler JL (4-Door)
• Engine: 3.6L

Enhance the utility and protection of your truck bed with the Artec Industries GearUp Cargo Rack Headache Rack Accessory. This modular add-on is engineered to integrate seamlessly with the GearUp Cargo Rack system, providing a durable barrier between your cargo and the cab's rear window.

• Designed specifically for compatibility with Artec Industries GearUp Cargo Rack systems.
• Protects rear cab glass from shifting equipment and oversized loads.
• Maintains the modular functionality of the GearUp series for easy customization.
• Provides additional mounting surface for lights, tools, and off-road accessories.

Fits 2018-2025 Jeep Wrangler JL and Gladiator JT.

The Artec Industries High Clearance Comp Front Bumper is engineered for off-roaders who prioritize maximum approach angles and a minimalist footprint. This competition-style bumper provides the critical clearance needed to tackle steep obstacles and vertical ledges, ensuring your tires reach the terrain before your armor does. Designed to bolt directly to the factory frame, it replaces the bulky OE unit with a streamlined, rugged solution for technical rock crawling.

• High-clearance design specifically engineered to maximize approach angles on technical terrain.
• Minimalist competition-style footprint reduces front-end overhang and weight.
• Direct bolt-on fitment to factory mounting points for a secure installation.
• Heavy-duty construction designed for durability in demanding off-road environments.
• Precision-engineered for the 2018-2025 Jeep Wrangler JL and Gladiator JT platforms.

Fits select 2018-2024 models equipped with the Artec Industries GearUp Cargo Rack system.

The Artec Industries GearUp Cargo Rack Molle Panel Shelf Accessory adds a dedicated horizontal mounting surface to your existing rack setup, significantly improving organization for tools and recovery equipment. This panel utilizes a precision-cut Molle grid pattern, allowing you to securely bolt or strap Molle-compatible pouches, first aid kits, and trail gear directly to the shelf. By creating a tiered storage solution, it keeps smaller, high-frequency items accessible and organized while leaving the primary cargo floor open for larger equipment.

• Designed specifically to integrate with the Artec Industries GearUp Cargo Rack
• Precision-engineered Molle pattern for modular accessory attachment
• Durable construction built to handle the vibrations and impacts of off-road use
• Direct bolt-on installation using the provided hardware for a secure fit
• Increases usable storage density within the vehicle's cargo area

Fits 2007-2018 Jeep Wrangler JK models.

The Artec Industries Apex Rear Axle Truss provides critical reinforcement for your Jeep's rear axle housing, designed to withstand the stresses of technical off-roading and the increased leverage of larger tire diameters. This truss system bridges the axle tubes and the differential housing, significantly reducing the risk of bending or breaking the factory assembly under high loads. The Apex series features a unique peaked design that increases structural rigidity while maintaining a low profile for maximum clearance.

• Specifically engineered for 2007-2018 Jeep Wrangler JK rear axles
• Apex peaked design provides superior strength-to-weight ratio
• Laser-cut and CNC-bent for precise fitment against the axle tubes and pumpkin
• Reinforces the entire rear axle assembly against housing distortion and tube bending
• Low-profile construction helps prevent interference with suspension components and floor pans

Optimize your vehicle's interior storage capacity with the Artec Industries GearUp Rear Cargo System. Designed for select 2018 and newer models, this system provides a dedicated platform for organizing trail gear, tools, and recovery equipment. The GearUp series is engineered for modularity, allowing you to secure items that would otherwise clutter the cargo floor or shift during transit.

Constructed to handle the rigors of off-road use, this rear cargo solution transforms disorganized storage into a professional-grade mounting surface. It is designed to integrate with the vehicle's interior layout, providing a secure fit that stays stable on rough terrain while keeping your essential equipment accessible for quick deployment.

• Brand: Artec Industries
• Series: GearUp
• Part Type: Rear Cargo System
• Application: Select 2018+ Models
• Function: Modular gear organization and secure storage

Fits 2018-2025 Jeep Wrangler JL models.

The Artec Industries 1 Ton Apex Front Superduty Swap Kit (JL6541) is engineered for Jeep JL owners upgrading to the strength of a heavy-duty 1-ton front axle. This comprehensive bracket system simplifies the process of swapping a 2005+ Ford Super Duty front axle into your Jeep, providing the durability needed for oversized tires and extreme technical terrain.

Designed under the Apex series line, this kit focuses on high-clearance geometry and precision fitment. The components are CNC laser-cut and CNC bent to ensure rigorous tolerances are met for proper suspension alignment. This specific kit includes Daystar bushings, which offer superior vibration damping and a longer service life than standard rubber components, ensuring your swap maintains excellent handling characteristics on and off the trail.

• Designed for 2005+ Ford Super Duty front axle conversions
• Apex series high-clearance bracketry optimizes ground clearance
• Includes heavy-duty Daystar bushings for improved longevity
• Precision CNC laser-cut and CNC bent steel construction
• Engineered to maintain proper suspension and steering geometry
• Manufacturer Part Number: JL6541

Fits 2021-2025 Jeep Wrangler JL Rubicon JLU 4-Door models equipped with the 392 Hemi engine.

Protect your high-performance engine's oil pan with the Artec Industries Aluminum Oil Skid Plate. Engineered specifically for the Jeep Wrangler JL 392 Hemi, this skid plate provides essential underbody protection against rocks and trail obstacles without the excessive weight of traditional steel plating. The lightweight aluminum construction offers superior corrosion resistance, ensuring your undercarriage remains protected even in harsh off-road environments.

Functionality meets protection with a built-in oil door, allowing you to perform routine maintenance and oil changes without the hassle of removing the entire skid system. This plate is precision-cut to follow the contours of the JLU 392 chassis, ensuring maximum clearance and a secure fit to factory mounting points.

• Constructed from high-strength aluminum for lightweight durability
• Integrated oil door provides easy access for maintenance without removal
• Contoured specifically for the 392 Hemi engine oil pan and exhaust routing
• Direct-fit design for 4-door JLU Rubicon models
• Manufacturer Part Number: JL4122

Fits 1970-2010 Chevrolet K20 and K30 models equipped with a 14-bolt front axle.

Reinforce your front axle housing and prevent catastrophic failure with the Artec Industries 14 Bolt Front Truss. Heavy-duty off-roading and oversized tires place immense stress on factory axle tubes, often leading to bending or shearing at the differential housing. This weld-on truss provides the necessary structural rigidity by tying the tubes and the pumpkin together, creating a unified backbone for your drivetrain.

• Heavy-duty steel construction designed for maximum torsional rigidity
• Low-profile design maintains clearance for steering and suspension components
• Reinforces axle tubes to prevent bending under high-load off-road conditions
• Designed specifically for the 14-bolt front axle platform
• Weld-on installation for a permanent, high-strength bond
• Manufacturer Part Number: TR1408

Fits 2007-2018 Jeep Wrangler JK models equipped with a 1-ton GM 14-bolt rear axle swap.

The Artec Industries 1 Ton Rear 14 Bolt Disc Brake Conversion Kit provides a professional-grade solution for integrating a massive 14-bolt rear axle into your JK's braking and ABS system. This kit is specifically designed to facilitate the switch to disc brakes while ensuring your vehicle's electronics remain functional by utilizing precise 52-tooth tone rings.

Constructed for the rigors of heavy-duty off-roading, this conversion kit replaces bulky factory drum setups or aging hardware with modern disc brake components. The inclusion of the 52-tooth configuration is critical for maintaining correct wheel speed sensor data on 2007-2018 JK platforms, preventing limp mode and ABS faults after an axle swap.

• Designed specifically for GM 14-Bolt 1-ton rear axle conversions
• Includes 52-tooth tone rings for JK ABS/ESP compatibility
• Heavy-duty brackets and hardware for secure caliper mounting
• Optimized for extreme off-road durability and heat dissipation
• Manufacturer Part Number: BB1420

Fits 1970-1985 Ford F-150 models equipped with a 9-inch front axle assembly.

Protect your drivetrain from the stresses of heavy off-roading with the Artec Industries 9 Inch Front Axle Truss. Engineered to reinforce the axle housing, this truss prevents the tubes from bending or twisting under high-torque loads and harsh terrain. It provides a rigid structural backbone that maintains critical component alignment and extends the life of your axle housing.

• Precision-engineered for 1970-1985 Ford F-150 9-inch front axle applications.
• Constructed from heavy-duty steel for maximum structural reinforcement.
• Low-profile design to minimize interference with suspension and steering components.
• Strengthens the connection between the axle tubes and the center section.
• Designed to simplify the welding process with tight tolerances and accurate fitment.

Please note: This product requires professional welding and fabrication for installation. It is intended for custom front 9-inch axle configurations used in these vehicles.

Fits 2018-2025 Jeep Wrangler JL Sahara.

Equip your rig for nighttime trails with the Artec Industries 50-inch LED light bar hood mount. This bracket system is specifically engineered to secure a full-size 50-inch light bar across the hood of your Jeep Wrangler JL, providing a stable mounting solution that maintains a low profile while maximizing forward illumination. Designed for a precise fit on Sahara trims, these mounts are built to withstand the vibrations and rigors of off-road use.

• Fits most standard 50-inch LED light bars
• Positions the light bar across the hood for optimal visibility
• Engineered specifically for the 2018-2025 Jeep Wrangler JL Sahara
• Utilizes factory mounting locations for a secure installation
• Heavy-duty construction ensures long-term durability on the trail

Fits 2018-2025 Jeep Wrangler JL and Gladiator JT models. This Artec Industries Inner C Gusset (JL4508) provides critical reinforcement to the factory axle C-sections, which are prone to bending or deflection when running larger tire diameters or navigating technical terrain.

Precision cut from heavy-duty steel, these gussets are designed to wrap around the axle's inner C-yokes to significantly increase structural rigidity without interfering with steering components or ball joint serviceability. By distributing loads across a larger surface area of the axle tube and C, this kit helps prevent permanent housing damage and costly alignment issues during off-road use.

• Specifically engineered for 2018-2025 Jeep JL and JT axle geometry
• Reinforces factory inner Cs to prevent bending under load
• Constructed from high-strength steel for maximum durability
• Maintains clearance for factory and aftermarket suspension components
• Manufacturer Part Number: JL4508

Fits 2018-2025 Jeep Wrangler JL models including Sahara.

Shield your vehicle's vulnerable rear suspension mounting points with Artec Industries Rear Lower Control Arm (LCA) Bolt-On Skids. These skids are engineered to protect the factory LCA brackets from direct impacts and rock damage that can lead to costly repairs or trail failures.

• Specifically designed for the 2018-2025 Jeep Wrangler JL chassis for a precise fit.
• Bolt-on design allows for a straightforward installation without the need for welding.
• CNC laser cut and formed for maximum durability and strength on the trail.
• Provides a smooth surface to slide over obstacles rather than hanging up on the factory brackets.
• Includes all necessary hardware for a complete installation on both rear lower control arm mounts.

Fits 2018-2025 Jeep Wrangler JL and Gladiator JT.

The Artec Industries Front Lower Control Arm (LCA) Skids are engineered to shield and reinforce one of the most vulnerable components on your Jeep’s front axle. Factory control arm mounts often act as anchor points for rocks and trail debris, leading to expensive damage or alignment issues. These heavy-duty skids provide a durable, sacrificial sliding surface that allows your vehicle to navigate obstacles without hanging up on the brackets.

• Precision fitment for 2018-2025 Jeep Wrangler JL and Gladiator JT models
• Protects vulnerable factory front lower control arm mounts from impact and abrasion
• Heavy-duty construction designed for rigorous off-road use
• Low-profile design preserves essential ground clearance while adding structural integrity
• Helps prevent bracket deformation during rock crawling

Designed for custom suspension fabrication and heavy-duty off-road builds, the Artec Industries Lower Link Axle Brackets provide a secure mounting point for your lower control arms. These brackets feature a 10-degree offset to help align the links with the chassis, reducing stress on rod ends and bushings while optimizing suspension geometry during articulation.

Built to withstand the rigors of rock crawling and trail use, these axle-end brackets are essential components for custom 3-link or 4-link setups. The 10-degree angle is specifically engineered for builders who need precise link orientation on solid axle swaps or custom axle builds.

• Manufacturer Part Number: BR1011
• Angle: 10 Degree Offset
• Quantity: Includes one pair (2 brackets)
• Application: Universal weld-on axle mounting for custom links

Engineered for high-clearance custom suspension builds, these Artec Industries Truss Upper Link Mounts provide a robust, weld-on solution for attaching upper control arms to an axle truss. These mounts are essential for fabricators building custom 3-link or 4-link suspension systems where precise geometry and maximum strength are required.

The 2.63-inch mounting width is designed to accommodate standard large-body rod ends and bushings, providing the necessary clearance for high-articulation off-road setups. These mounts are designed to integrate seamlessly with Artec trusses, ensuring a clean installation and a significant increase in mounting point rigidity compared to stock or thin-gauge brackets.

• Manufacturer Part Number: BR1044
• Mounting Width: 2.63 inches
• Configuration: Truss-style upper link mounts
• Quantity: Sold as a pair
• Application: Ideal for custom 3-link and 4-link axle configurations

Fits 2007-2018 Jeep Wrangler JK and JKU Unlimited models.

Replace your worn or damaged factory mounts with this heavy-duty Artec Industries Rear Coil Perch and Retainer kit. Engineered for precision and durability, these perches provide a secure mounting point for your rear coil springs. The included retainers ensure your springs stay properly seated on the axle, even during high-articulation off-road maneuvers where standard mounts might fail.

• Direct replacement for factory rear coil perches on JK/JKU axles
• Includes coil retainers to prevent spring unseating during suspension travel
• Heavy-duty construction designed to withstand trail abuse and heavy loads
• Sold as a complete pair for both driver and passenger sides
• Manufacturer Part Number: JK4425

Correct your suspension geometry and improve handling with the Artec Industries Raised Track Bar Bracket, specifically engineered for front axles with a 3.5-inch (3-1/2") tube diameter. This heavy-duty bracket relocates the axle-side track bar mounting point to a higher position, an essential modification for lifted vehicles to keep the track bar and drag link parallel.

• Designed specifically for front axle tubes with a 3.5-inch diameter
• Raised mounting point corrects steering geometry and roll center on lifted applications
• Helps eliminate bump steer by restoring proper linkage alignment
• Heavy-duty construction suitable for custom axle swaps and off-road builds
• Precision-engineered for a weld-on installation

Fits 2007-2018 Jeep Wrangler JK.

Protect your Jeep's vulnerable front lower control arm mounts with Artec Industries Front LCA Skids. These heavy-duty skids are designed to shield the factory brackets from direct impact and trail damage, providing a smooth surface to slide over rocks rather than hanging up or bending the mounting points. This is a critical upgrade for off-road enthusiasts looking to reinforce their JK's suspension architecture against harsh terrain.

• Protects factory front lower control arm mounting brackets
• Designed to prevent hang-ups and bracket deformation on obstacles
• Rugged construction built for off-road durability
• Specific fitment for 2007-2018 Jeep Wrangler JK models
• Manufacturer Part Number: JK4404

Fits 2007-2018 Jeep Wrangler JK models.

Strengthen your front suspension with Artec Industries Front Axle Shock Mounts. These heavy-duty replacements are engineered to replace the thin, vulnerable factory brackets that often bend or fail during rigorous off-road use. By providing a more robust mounting point on the axle, these mounts ensure your front shocks remain securely attached even under extreme articulation and high-impact conditions.

• Precision CNC laser-cut and CNC bent for an exact fit on the JK front axle
• Heavy-duty steel construction significantly exceeds the strength of OE brackets
• Designed specifically for the 2007-2018 Jeep Wrangler JK (2-door and 4-door)
• Ideal for axle swaps, repairs, or reinforcing a factory housing
• Requires welding for secure installation

Fits 1978-1979 Ford F-350 models equipped with a Dana 60 front axle.

The Artec Industries TR6030 Front Ram Mount and Truss is engineered to provide ultimate reinforcement for your Ford Dana 60 front axle. This heavy-duty system addresses the common weak points in factory axle housings, preventing tube flex and housing distortion during extreme off-road use or when running oversized tires. Designed with an integrated hydraulic ram mount, it simplifies the installation of performance steering setups while adding significant structural integrity to the axle assembly.

• Specifically designed for 1978-1979 Ford F-350 Dana 60 front axles
• Heavy-duty steel construction for maximum rigidity and impact resistance
• Integrated mounting solution for hydraulic steering rams
• Reinforces axle tubes to prevent bending under high-torque and high-impact loads
• Low-profile design helps maintain clearance for suspension components
• Precision CNC-cut and formed components for accurate fitment
• Manufacturer Part Number: TR6030