Universal fitment designed to allow you to connect two devices to the OBDII port. The plug is a right angle for minimal interference. Most ECMs will only communicate with one diagnostic device at a time. Using a splitter will result in the vehicle’s ECM having to choose between devices. One of your devices will not operate properly.Fitment Note: For use with Banks devices and Retractable Steps. Not intended for use with Banks devices and third-party OBD monitors.

• Connect two devices to the OBDII port

iDash®Stealth Pods are direct-fit gauge mounts that affix to your late 2022-2026 GM 1500's and 2024-2026 2500/3500 factory A-pillar grab handle while concealing wires for a factory look. Each pod securely mounts to the body of the truck while being angled to enhance gauge viewing and ergonomics. Proudly made in the USA from industrial-grade polymer, iDash Stealth Pods can be installed in minutes, and are built to last the life of your truck through hot summer days or cold winter nights. Each Stealth Pod ships in a natural black finish and can be painted by you to color-match your interior. Vehicle-specific grab handle mount designed to work with the low profile nature of the iDash. Ergonomically designed with an optimized viewing angle that is closer to the driver for enhanced visibility. Stealth Pods hide wiring for a clean install and can be painted to match OEM interior colors. NOTE: iDash Gauge not included. Fitment for non iDash gauges is not guaranteed.Key Features: Designed for Banks iDash. Optimized gauge face orientation. Retains Factory Grab Handle. OE Grade Polyamide-12 construction, durable to last life of truck.

• Retains factory grab handle

This Part Fits:

Professional fit and finish, this mounting solution attaches to the factory pillar effortlessly by utilizing the included mounting hardware

• Professional fit and finish, this mounting solution attaches to the factory pillar effortlessly by utilizing the included mounting hardware
• Black textured finish which can be painted to match your interior if desired
• High quality, composite construction is incredibly durable and looks great
• Seamlessly integrate AutoMeter 2-1/16" gauges into your interior

This Part Fits:

Autometer Steering Column Gauge Mounts (Pod) Are Covers That Install Over The Top Of Your Vehicles Factory Steering Column Shroud, Providing A Clean And Convenient Location To Install An Additional 2 1/16" Gauge Or Two In The Drivers Field Of Vision. These Products Are Vehicle-Specific Fitment To Ensure Proper Fit And Finish And Are Molded From Durable Abs Composite Material With A Black Textured Finish Which Can Be Painted To Match Your Interior Trim If Desired.

• High quality, composite construction is incredibly durable and looks great

This Part Fits:

Innovate MTX-A Series gauges are 2 1/16" of pure performance! This microprocessor-driven series delivers superior needle holding force for high shock and high vibration applications. They feature high performance, high-torque, 270 degree stepper motors, programmable warning indicators, and Innovate MTS serial in/out to use with their other devices as well as third-party MTS-enabled devices to add additional logging channels. Innovate MTX-A Series analog gauges are available to provide various data readings, and also each dial also includes stylish, interchangeable black and silver bezels.

• KIT INCLUDES: Gauge (Black Faceplate, Not Interchangeable), Black Bezel, Silver Bezel, Program Cable (Serial), 4-Bar MAP Sensor, MAP Accessory Kit: T Fitting, Vacuum Hose, and Zip Ties, Quick Start Installation Guide

Compliment your fuel regulator with the Grams fuel pressure gauge. These easy to read, matte black stainless steel gauges measure 0-30 psi (2.06 bar) and are glycerin filled to accommodate applications with the highest vibrations. While adjusting the regulator, the Grams Fuel Pressure Gauge will provide you an accurate fuel pressure reading at a glance.

• Matte Black Stainless Steel Case And Bezel
• Stainless Steel And Brass Construction
• Shatterproof Polycarbonate Lens
• 1/8 in. - 3.175mm NPT Fitting
• 1.5 in. - 38.1mm Face
• Glycerin Filled
• 0-30 PSI

Stack Instruments Series, Gauge Mount, Pedestal, For 52mm Gauge

Seeing The Exact Fuel Pressure On Your Vehicle Can Mean The Difference Between Extracting The Most Performance Safely And Expensive Failures. Autometers Digital Stepper Motor Fuel Pressure Gauge Will Precisely Measure Your Exact Fuel Pressure At Levels Of Accuracy Previously Unheard Of Even In Professional Gauges. Designed For Fuel Injected Or Carbureted Applications, Our Advanced 1/8" Npt Solid State Pressure Transducer Provides The Best Possible Measurements On The Market With Unparalleled Resistance To Vibration And Heat. Dont Take Chances With Your Investment; A Precise Fuel Pressure Gauge Could Be The Cheapest Insurance Youve Ever Bought. A Direct Plug In Wiring Harness Is Included For Ease Of Installation And Data Logging Is Available Thanks To A .5 - 4.5V Analog Output.

• 12 and 16 volt compatible, compatible with nearly every street car or race car electrical system

This Part Fits:

A High Water Temp Can Be Detrimental To An Engine. Heat Is The Enemy Of Performance And Reliability. Keep Tabs On Your Temps With The Most Trusted Water Temperature Gauge On The Market. Autometers Advanced 1/8" Npt Temperature Transducer Is Included For A Simple Installation On Any Application.

• Gauge kit includes 1/8" NPT temperature sender, 3/8" and 1/2" NPT adapters, bulb and socket assembly, red and green bulb covers, mounting hardware, and detailed instructions for installation
• Autometers Race Proven Air-Core Electric Instruments Provide Quick And Accurate Readings While Keeping Hazardous Fluids Outside Of The Vehicle
• 12 and 16 volt compatible, well-suited with nearly every street car or race car electrical system

Optimally Positions Key Performance Data Within Drivers Field Of Vision

• Seamlessly integrate AutoMeter 2-1/16" gauges into your interior

This Part Fits:

FITTING, ADAPTER, METRIC, M14X1.5 MALE TO 1/8" NPTF FEMALE, BRASS

Professional fit and finish, this mounting solution attaches to the factory pillar effortlessly by utilizing the included mounting hardware

• Professional fit and finish, this mounting solution attaches to the factory pillar effortlessly by utilizing the included mounting hardware
• Black textured finish which can be painted to match your interior if desired
• High quality, composite construction is incredibly durable and looks great
• Seamlessly integrate AutoMeter 2-1/16" gauges into your interior

This Part Fits:

Professional fit and finish, this mounting solution attaches to the factory pillar effortlessly by utilizing the included mounting hardware

• Professional fit and finish, this mounting solution attaches to the factory pillar effortlessly by utilizing the included mounting hardware
• Black textured finish which can be painted to match your interior if desired
• High quality, composite construction is incredibly durable and looks great
• Seamlessly integrate AutoMeter 2-1/16" gauges into your interior

This Part Fits:

Professional fit and finish, this mounting solution attaches to the factory pillar effortlessly by utilizing the included mounting hardware

• Professional fit and finish, this mounting solution attaches to the factory pillar effortlessly by utilizing the included mounting hardware
• Black textured finish which can be painted to match your interior if desired
• High quality, composite construction is incredibly durable and looks great
• Seamlessly integrate AutoMeter 2-1/16" gauges into your interior

This Part Fits:

AEM CD7 Carbon Digital Flat Panel Displays feature full-color, daylight readable screens surrounded by a slim, tough, lightweight flow-molded carbon fiber composite housing. Seven ultra-bright LEDs span the top of the display housings for RPM and shift light indication. Users can program them to ascend in specific increments based on RPM range and flash when it is time to shift. Brightness is user programmable on the fixed color LEDs. A remote button kit (PN 30-3610, sold separately) easily wires into the CD Carbon wiring harness and allows users to change pages and clear memory. Two additional programmable LEDs are included in the enclosure and are fully programmable.

• Add Vehicle Dynamics Module for GPS, 3-axis gyroscope and 3 axis accelerometer for G-loads, roll, pitch, yaw, track mapping and lap timing (PN 30-2206, sold separately)
• Install on carbureted and pre-2008 stock ECU-equipped vehicles using a 22 Channel CAN Sensor Module (PN 30-2212) or 6 Channel CAN Sensor Module (PN 30-2226)
• Install 8 additional temp inputs and send them to the CD-7 Carbon with our 8 Channel K-Type EGT CAN Module (PN 30-2224, sold separately)
• Seven programmable pages including four Main pages, Alarm, On-Change and Start-up pages (requires Button Kit PN 30-3610)
• Accepts channels from 2008-up factory ECUs using Plug & Play OBDII CAN Adapter Cable (PN 30-2217, sold separately)
• Dedicated Alarm page quickly identifies problems, programmable in almost any language! (user defined)
• Two extra switch inputs included for displaying user-triggered events (blinkers, high beams etc.)
• Unique On-Change page can be used to identify map switching for boost, traction, lap times, etc.
• Use the included page layouts and input your channels and text, or create your own from scratch
• Over 200 supplied fully programmable SAE and custom warning icons, and you can add your own
• User supplied graphics can be changed based on channel values (up to the full screen size)
• Accepts channels from AEMnet CAN-enabled devices and non-AEM CAN bus devices side by side
• Seven LED RPM/shift light indicators on top of the housing (programmable and dimmable)
• Plug & Play Adapter Cables available for Holley, Link, MSD Atomic and Vi-Pec ECUs
• Available with or without 200Mb internal logging (up to 1,000Hz/channel)
• 'Headlight-in' connection dims the dash and LEDs during night operation
• Direct sunlight readable (1000cd/m2 brightness and anti-glare filter)
• Wiring interface/harnesses are identical between all CD Carbon Dashes
• Available with or without onboard 20 Hz GPS receiver and antenna
• Rugged, lightweight flow-molded carbon fiber composite enclosure
• Layout files interchangeable between all CD Carbon Dashes
• Convert CAN bus channel values to user-defined text
• Full color 7" screen with 800x480 resolution
• IP66 water resistance - open cockpit safe
• Free DashDesign Graphics Editor software
• Two programmable LEDs
• Odometer function

AEM CD7 Carbon Digital Flat Panel Displays have a compact enclosure that makes them perfect for flush mount installation or in-dash installations with tight tolerances. They include all of the robust features found in the original CD-7 Carbon Dash, but do not have buttons or an LED shade hood built into the enclosure.AEM CD7 Carbon Digital Flat Panel Displays feature full-color, daylight readable screens surrounded by a slim, tough, lightweight flow-molded carbon fiber composite housing. Seven ultra-bright LEDs span the top of the display housings for RPM and shift light indication. Users can program them to ascend in specific increments based on RPM range and flash when it is time to shift. Brightness is user programmable on the fixed color LEDs. A remote button kit (PN 30-3610, sold separately) easily wires into the CD Carbon wiring harness and allows users to change pages and clear memory. Two additional programmable LEDs are included in the enclosure and are fully programmable.

• Add Vehicle Dynamics Module for GPS, 3-axis gyroscope and 3 axis accelerometer for G-loads, roll, pitch, yaw, track mapping and lap timing (PN 30-2206, sold separately)
• Install on carbureted and pre-2008 stock ECU-equipped vehicles using a 22 Channel CAN Sensor Module (PN 30-2212) or 6 Channel CAN Sensor Module (PN 30-2226)
• Install 8 additional temp inputs and send them to the CD-7 Carbon with our 8 Channel K-Type EGT CAN Module (PN 30-2224, sold separately)
• Seven programmable pages including four Main pages, Alarm, On-Change and Start-up pages (requires Button Kit PN 30-3610)
• Accepts channels from 2008-up factory ECUs using Plug & Play OBDII CAN Adapter Cable (PN 30-2217, sold separately)
• Dedicated Alarm page quickly identifies problems, programmable in almost any language! (user defined)
• Two extra switch inputs included for displaying user-triggered events (blinkers, high beams etc.)
• Unique On-Change page can be used to identify map switching for boost, traction, lap times, etc.
• Use the included page layouts and input your channels and text, or create your own from scratch
• Over 200 supplied fully programmable SAE and custom warning icons, and you can add your own
• User supplied graphics can be changed based on channel values (up to the full screen size)
• Accepts channels from AEMnet CAN-enabled devices and non-AEM CAN bus devices side by side
• Seven LED RPM/shift light indicators on top of the housing (programmable and dimmable)
• Plug & Play Adapter Cables available for Holley, Link, MSD Atomic and Vi-Pec ECUs
• Available with or without 200Mb internal logging (up to 1,000Hz/channel)
• 'Headlight-in' connection dims the dash and LEDs during night operation
• Direct sunlight readable (1000cd/m2 brightness and anti-glare filter)
• Wiring interface/harnesses are identical between all CD Carbon Dashes
• Available with or without onboard 20 Hz GPS receiver and antenna
• Rugged, lightweight flow-molded carbon fiber composite enclosure
• Layout files interchangeable between all CD Carbon Dashes
• Convert CAN bus channel values to user-defined text
• Full color 7" screen with 800x480 resolution
• IP66 water resistance - open cockpit safe
• Free DashDesign Graphics Editor software
• Two programmable LEDs
• Odometer function

AEM CD5 Carbon Flat Panel Digital Displays are perfect for flush mount installation or in-dash enclosures with tight tolerances. They include all of the robust features found in the original CD-5 Carbon car dashboard monitors, but do not have buttons or an LED shade hood built into the enclosure. AEM CD5 Carbon Flat Panel Digital Displays feature full-color, daylight readable screens surrounded by a slim, tough, lightweight flow-molded carbon fiber composite housing. Seven ultra-bright LEDs span the top of the display housings for RPM and shift light indication. Users can program them to ascend in specific increments based on RPM range and flash when it is time to shift. Brightness is user programmable on the fixed color LEDs. A remote button kit (PN 30-3610, sold separately) easily wires into the CD Carbon wiring harness and allows users to change pages and clear memory. Two additional programmable LEDs are included in the car dashboard monitor's enclosure and are fully programmable

• Add Vehicle Dynamics Module for GPS, 3-axis gyroscope and 3 axis accelerometer for G-loads, roll, pitch, yaw, track mapping and lap timing (PN 30-2206, sold separately)
• Install on carbureted and pre-2008 stock ECU-equipped vehicles using a 22 Channel CAN Sensor Module (PN 30-2212) or 6 Channel CAN Sensor Module (PN 30-2226)
• Install 8 additional temp inputs and send them to the CD Carbon Dash with our 8 Channel K-Type EGT CAN Module (PN 30-2224, sold separately)
• Seven programmable pages including four Main pages, Alarm, On-Change and Start-up pages (requires Button Kit PN 30-3610)
• Accepts channels from 2008-up factory ECUs using Plug & Play OBDII CAN Adapter Cable (PN 30-2217, sold separately)
• Dedicated Alarm page quickly identifies problems, programmable in almost any language! (user defined)
• Two extra switch inputs included for displaying user-triggered events (blinkers, high beams etc.)
• Unique On-Change page can be used to identify map switching for boost, traction, lap times, etc.
• Use the included page layouts and input your channels and text, or create your own from scratch
• Over 200 supplied fully programmable SAE and custom warning icons, and you can add your own
• User supplied graphics can be changed based on channel values (up to the full screen size)
• Accepts channels from AEMnet CAN-enabled devices and non-AEM CAN bus devices side by side
• Seven LED RPM/shift light indicators on top of the housing (programmable and dimmable)
• Plug & Play Adapter Cables available for Holley, Link, MSD Atomic and Vi-Pec ECUs
• Available with or without 200Mb internal logging (up to 1,000Hz/channel)
• 'Headlight-in' connection dims the dash and LEDs during night operation
• Direct sunlight readable (1000cd/m2 brightness and anti-glare filter)
• Wiring interface/harnesses are identical between all CD Carbon Dashes
• Available with or without onboard 20 Hz GPS receiver and antenna
• Rugged, lightweight flow-molded carbon fiber composite enclosure
• Layout files interchangeable between all CD Carbon Dashes
• Convert CAN bus channel values to user-defined text
• Full color 5" screen with 800x480 resolution
• Free DashDesign Graphics Editor software
• Two programmable LEDs
• IP66 water resistance
• Odometer function

AEM CD5 Carbon Flat Panel Digital Displays are perfect for flush mount installation or in-dash enclosures with tight tolerances. They include all of the robust features found in the original CD-5 Carbon car dashboard monitors, but do not have buttons or an LED shade hood built into the enclosure. AEM CD5 Carbon Flat Panel Digital Displays feature full-color, daylight readable screens surrounded by a slim, tough, lightweight flow-molded carbon fiber composite housing. Seven ultra-bright LEDs span the top of the display housings for RPM and shift light indication. Users can program them to ascend in specific increments based on RPM range and flash when it is time to shift. Brightness is user programmable on the fixed color LEDs. A remote button kit (PN 30-3610, sold separately) easily wires into the CD Carbon wiring harness and allows users to change pages and clear memory. Two additional programmable LEDs are included in the car dashboard monitor's enclosure and are fully programmable

• Add Vehicle Dynamics Module for GPS, 3-axis gyroscope and 3 axis accelerometer for G-loads, roll, pitch, yaw, track mapping and lap timing (PN 30-2206, sold separately)
• Install on carbureted and pre-2008 stock ECU-equipped vehicles using a 22 Channel CAN Sensor Module (PN 30-2212) or 6 Channel CAN Sensor Module (PN 30-2226)
• Install 8 additional temp inputs and send them to the CD Carbon Dash with our 8 Channel K-Type EGT CAN Module (PN 30-2224, sold separately)
• Seven programmable pages including four Main pages, Alarm, On-Change and Start-up pages (requires Button Kit PN 30-3610)
• Accepts channels from 2008-up factory ECUs using Plug & Play OBDII CAN Adapter Cable (PN 30-2217, sold separately)
• Dedicated Alarm page quickly identifies problems, programmable in almost any language! (user defined)
• Two extra switch inputs included for displaying user-triggered events (blinkers, high beams etc.)
• Unique On-Change page can be used to identify map switching for boost, traction, lap times, etc.
• Use the included page layouts and input your channels and text, or create your own from scratch
• Over 200 supplied fully programmable SAE and custom warning icons, and you can add your own
• User supplied graphics can be changed based on channel values (up to the full screen size)
• Accepts channels from AEMnet CAN-enabled devices and non-AEM CAN bus devices side by side
• Seven LED RPM/shift light indicators on top of the housing (programmable and dimmable)
• Plug & Play Adapter Cables available for Holley, Link, MSD Atomic and Vi-Pec ECUs
• Available with or without 200Mb internal logging (up to 1,000Hz/channel)
• 'Headlight-in' connection dims the dash and LEDs during night operation
• Wiring interface/harnesses are identical between all CD Carbon Dashes
• Direct sunlight readable (1000cd/m2 brightness and anti-glare filter)
• Available with or without onboard 20 Hz GPS receiver and antenna
• Rugged, lightweight flow-molded carbon fiber composite enclosure
• Layout files interchangeable between all CD Carbon Dashes
• Convert CAN bus channel values to user-defined text
• Full color 5" screen with 800x480 resolution
• Free DashDesign Graphics Editor software
• IP66 water resistance
• Two programmable LEDs
• Odometer function

Turbosmart's mechanical boost gauge is designed to provide accurate readings up to 30psi. It features a black face with a silver bezel and bright backlighting that ensures easy reading in any condition. The Turbosmart mechanical boost gauge is the perfect companion for any of Turbosmart's Gated Boost Control Valves, as its simple mechanical operation makes it easy to use. With this Turbosmart boost gauge, you can monitor your turbo system performance quickly and precisely without worrying about complicated settings or operations. With Turbosmart's reliable and accurate mechanical boost gauges, achieve peak performance from your turbo setup!

The Turbosmart EB2 60mm Dash Mounting Kit provides an easy and professional way to mount the Turbosmart FPR1200 eBoost2 controller. The mounting kit allows you to securely attach the eBoost2 to flat surfaces, such as your dash or interior trim, using adjustable mounts and fasteners. Thanks to this sturdy setup, you can trust that the Turbosmart FPR1200 will stay in place no matter how rugged ride you're taking. Get your Turbosmart EB2 60mm Dash Mounting Kit today and ensure that your Turbosmart FPR1200 is secure when you need it most.

Turbosmart's mechanical boost gauge is designed to provide reliable performance and accurate readings. With its black face, silver bezel, bright backlighting, and a vacuum range from 0-2 Bar (52mm - 2 1/16?), this Turbosmart Boost Gauge are perfect for use with any Turbosmart Gated Boost Control Valve. The Turbosmart Boost Gauge looks great on the dashboard and provides all necessary hook-up and panel mounting hardware right out of the box. This makes installation quick and easy - no extra parts or tools are required! With Turbosmart's Mechanical Boost Gauge, you can count on safe, accurate readings day after day. So what are you waiting for - get Turbosmart Mechanical Boost Gauge and start accurately regulating your boost today!