Fits 1992-2000 Lexus SC300 and SC400 (JZZ30/UZZ30).

Tein Flex Z coilovers provide a high-performance suspension solution for the Lexus SC chassis, offering full ride height adjustability without sacrificing damper stroke. Engineered in Yokohama, Japan, the Flex Z series utilizes a twin-tube system designed to balance street comfort with the stiffness required for spirited driving. This setup allows you to lower your vehicle's center of gravity while maintaining the compliance needed for daily road use.

The VST60-C1SA3-C kit features 16-level damping force adjustment, enabling precise control over rebound and compression to suit your specific tire setup and driving style. By using a sealed structure design, Tein provides a cost-effective, high-quality damper that is replaced via cartridge when worn, rather than requiring a traditional rebuild. Each unit is finished with Tein's signature green powder coat and ZT coating on the shell case for superior corrosion resistance against the elements.

• Twin-tube internal construction for improved ride quality and street performance
• 16-way damping force adjustment (compatible with EDFC controllers)
• Full-length ride height adjustment allows for independent preload and height settings
• Pillow ball or reinforced rubber upper mounts included for direct steering response
• ZT-coated shell case and Teflon-coated threads for longevity and ease of adjustment
• Manufacturer Part Number: VST60-C1SA3-C

Fits 2008-2015 Scion xB models.

Tein S.Tech lowering springs are a functional suspension upgrade designed to provide an aggressive stance and improved road holding without sacrificing daily ride quality. By lowering the vehicle's center of gravity, these springs reduce body roll during cornering and improve steering response. The progressive spring rate design ensures the suspension remains compliant over minor road imperfections while providing the necessary stiffness during spirited driving.

Each spring is produced using a cold-forming process with SAE9254V steel, a material chosen for its high tensile strength and resistance to sagging. The signature Tein green powder-coat finish offers durable protection against corrosion and environmental wear. These springs are engineered to work with OEM or OEM-replacement dampers for a straightforward installation.

• Manufacturer Part Number: SKC24-S3B00
• Material: Cold-formed SAE9254V steel
• Design: Progressive spring rate for optimal comfort and performance
• Finish: Durable green powder coating
• Fitment: Direct replacement for factory coil springs

Fits 2006-2010 Scion tC (ANT10L).

Tein Flex Z coilovers deliver a high-performance suspension solution that balances daily street comfort with aggressive handling. This full-length adjustable system allows you to set your desired ride height without compromising suspension stroke or spring preload. Utilizing a twin-tube internal design, the Flex Z series provides a smooth ride over varied road surfaces while maintaining the damping control required for spirited driving.

The 16-level linear damping adjustment allows for precise tuning of the compression and rebound settings, making it easy to transition from a comfortable commute to a rigid track setup. These units feature Tein's signature green powder coating and ZT-coated threads for maximum corrosion resistance in harsh environments.

• Manufacturer Part Number: VSL52-CUSA4-C
• System Type: Twin-tube for improved ride quality and stroke
• Damping: 16-way adjustable damping force (EDFC compatible)
• Height Adjustment: Full-length adjustable shell case for independent height and preload
• Mounts: Includes reinforced rubber or pillow ball upper mounts where applicable
• Finish: Powder-coated body with ZT-coated threads for durability

Fits 1992-2002 Honda Prelude (BB1, BB2, BB6, and BB7) models.

The Tein Flex Z coilover kit provides a comprehensive suspension solution for Prelude owners seeking a balance of street comfort and aggressive handling. This full-length adjustable system allows you to set your desired ride height independently of spring preload, ensuring you maintain full suspension stroke even at lower settings. Built with a twin-tube internal structure, these coilovers are designed to absorb road irregularities effectively, making them ideal for daily driving and spirited weekend use.

• 16-level linear damping force adjustment (combined compression and rebound)
• Twin-tube system for improved ride quality on various road surfaces
• Full-length ride height adjustment system with minimal change in ride comfort
• Complete kit includes front and rear coilovers with integrated upper mounts
• Finished in Tein’s signature green powder coat for superior corrosion resistance
• Manufacturer Part Number: VSH92-C1SA3-C

The Tein Flexible Damper Controller extension is a specialized tool designed to solve the problem of inaccessible damping adjustment knobs. In many vehicle configurations, the top of the shock absorber or coilover piston rod is obscured by interior trim, rear parcel shelves, or speaker decks, making manual adjustments impossible without removing parts of the interior.

This 300mm flexible extension mounts directly to the adjustment clicker on your Tein dampers, allowing you to relocate the knob to a reachable location. The internal cable is engineered to maintain a precise, tactile "click" feel, ensuring you can accurately count your damping steps even with the extension bent or routed through tight spaces.

• Manufacturer Part Number: FLK01-AA300
• Length: 300mm
• Compatible with Tein dampers utilizing top-mounted adjustment knobs
• Relocates adjustment interface for easy access in confined spaces
• Maintains tactile feedback for accurate setting changes

Fits 2015-2021 Subaru WRX (VAG) and WRX STI (VAF).

The Tein EnduraPro Plus is a high-performance, OE-shape shock absorber designed as a direct replacement for factory dampers. As part of the EnduraPro Plus series, this unit features 16-level damping force adjustment, allowing you to tune your suspension for daily comfort or spirited performance. These shocks utilize a twin-tube system for a smooth stroke and incorporate Tein's proprietary Hydraulic Bump Stopper (H.B.S.) technology. H.B.S. effectively manages the energy of heavy impacts, reducing the harshness associated with bottoming out while maintaining vehicle stability under load.

• 16-level damping force adjustment for precision ride control
• Hydraulic Bump Stopper (H.B.S.) technology improves durability and comfort
• Twin-tube internal construction for consistent damping performance
• Direct OE-shape replacement compatible with factory springs and mounting points
• High-durability shell case with a rust-proof powder coat finish
• Manufacturer Part Number: VSSB0-B1DS2

Fits 1992-1995 Honda Civic and 1993-1997 Honda Del Sol.

Tein S.Tech Lowering Springs are an excellent first step toward suspension tuning, offering a more aggressive stance and improved road holding. These springs are specifically engineered to lower your vehicle's center of gravity, reducing body roll during cornering and nose-dive under braking. Designed for compatibility with OEM or performance replacement shocks, the S.Tech line balances a lowered look with the spring rates necessary for daily drivability.

• Manufactured from high-grade spring steel for maximum sag resistance and longevity
• Progressive spring rate design provides a comfortable ride during normal cruising and increased support during spirited driving
• Signature green powder coat finish for superior corrosion resistance
• Designed as a direct-fit replacement for factory springs
• Includes silencer rubbers where applicable to eliminate noise and vibration
• Manufacturer Part Number: SKA00-C3B00

Fits 2017-2019 Honda Civic Type-R (FK8).

Tein S.Tech lowering springs are designed to provide a more aggressive stance and improved road-holding for the FK8 Honda Civic Type-R. By lowering the vehicle's center of gravity, these springs reduce body roll during cornering and provide a more planted feel. The S.Tech series is specifically engineered to work with factory dampers, offering a balance between performance-oriented handling and street-friendly ride quality.

• Designed for a lower center of gravity and improved handling
• Progressive spring rate design maintains ride quality during daily driving
• Finished in Tein's signature green powder coat for excellent corrosion resistance
• Engineered for compatibility with original equipment (OE) dampers
• Manufacturer Part Number: SKHK8-S3B00

Fits 2012-2013 Honda Civic. This Tein EnduraPro Plus kit provides a high-performance alternative to factory shock absorbers, utilizing an OE-shape design that compatible with original springs and top mounts. These dampers are engineered for drivers seeking improved handling and ride comfort without the complexity of a full coilover conversion.

• 16-Level Damping Adjustment: Features a needle valve system to simultaneously adjust compression and rebound, allowing you to fine-tune the suspension for different road conditions or load weights.
• Hydraulic Bump Stopper (HBS): Internal technology that converts the impact of full compression into thermal energy, significantly reducing vehicle oscillation and the harshness associated with bottoming out.
• Twin-Tube Construction: Provides a longer stroke with lower gas pressure, ensuring a smooth ride and consistent performance over varied terrain.
• Durability: Finished in Tein's signature green powder coat for superior corrosion resistance. High-strength shell cases and high-performance damper oil ensure longevity under heavy use.
• Manufacturer Part Number: VSHK2-B1DS2

Fits 2004-2006 Pontiac GTO.

Tein S.Tech springs are an ideal solution for drivers looking to improve handling and achieve a lower, more aggressive stance without compromising daily ride quality. These springs are designed specifically for the Pontiac GTO chassis and are compatible with OEM or OE-replacement dampers. Each spring is wound from high-tensile SAE9254V chrome vanadium steel to ensure long-term durability and resistance to sagging.

• Progressive spring rate design maintains comfort during cruising while stiffening under load
• Lowered center of gravity reduces body roll and improves turn-in response
• Durable green powder-coat finish provides excellent protection against the elements
• Extensively road-tested to ensure the optimal balance of performance and aesthetics
• Manufacturer Part Number: SKJ06-S3B00

Fits 2012-2021 Toyota 86 and Subaru BRZ.

The Tein RX1 coilover system provides a high-performance suspension upgrade for the ZN6 and ZC6 chassis. This kit replaces the factory struts and springs with full-length adjustable dampers, allowing you to lower the vehicle's center of gravity and fine-tune its stance without sacrificing damper stroke. The RX1 series is engineered to handle the demands of spirited driving while maintaining composed ride quality, making it an ideal solution for enthusiasts looking to improve the handling dynamics of their 86 or BRZ.

• Full-length ride height adjustment allows independent tuning of height and spring preload
• Equipped with Tein Hydraulic Bump Stopper (HBS) technology to absorb high-impact loads
• 16-level damping force adjustment for precise control over ride characteristics
• High-tensile strength springs and durable powder-coated damper bodies
• Designed to bolt directly to factory mounting points
• Manufacturer Part Number: VSQ54-M1SS4

Fits 2003-2005 Honda Civic (EP3).

Tein S.Tech Lowering Springs are an excellent choice for drivers looking to achieve a more aggressive stance and improved handling without sacrificing daily ride comfort. By lowering the center of gravity, these springs reduce body roll during cornering and nose-dive under braking, providing a more planted feel on the road. Each spring is specifically tuned for the EP3 chassis to ensure compatibility with either OEM or aftermarket performance dampers.

• Designed for an aggressive drop and enhanced road-holding performance
• Progressive spring rate design maintains high ride quality during normal driving
• Cold-formed from high-tensile SAE9254V chrome silicon steel for maximum sag resistance
• Green powder coat finish provides durable protection against corrosion and the elements
• Includes rubber silencer sleeves where applicable to prevent spring noise
• Manufacturer Part Number: SKA92-S3B00

Fits 2001-2006 Lexus LS430 (UCF30).

Tein Flex Z coilovers deliver a comprehensive suspension upgrade for the UCF30 chassis, balancing a refined ride with the performance of a fully adjustable system. These coilovers utilize a twin-tube design, which provides a longer stroke and lower internal friction compared to mono-tube alternatives, ensuring the LS430 maintains its signature luxury feel even at a lower ride height.

The Flex Z series features a full-length adjustment system, allowing you to set your vehicle's height by moving the lower bracket rather than compressing the spring. This preserves full suspension travel and preload settings regardless of how low you go. With 16 levels of damping force adjustment, you can quickly transition from a compliant street setting to a firmer, more controlled profile for high-speed stability.

• Twin-tube internal structure for superior comfort on uneven road surfaces
• 16-level linear damping force adjustment (compression and rebound combined)
• Full-length ride height adjustment via moveable lower bracket
• Includes pre-assembled reinforced rubber upper mounts for simplified bolt-on installation
• High-durability ZT coating on adjustment threads for corrosion resistance in all weather conditions
• Tein green powder-coated damper bodies and cold-formed springs

Fits 2022+ Toyota Corolla FWD models.

The Tein EnduraPro Plus Kit is a high-performance, OE-shape replacement damper set designed to improve ride quality and handling performance. Unlike standard replacement shocks, these dampers feature 16-level damping force adjustment, allowing you to tune the suspension for either comfort or spirited driving. They are engineered to be used with factory springs or aftermarket lowering springs, providing a versatile solution for drivers who want improved control without the complexity of a full coilover system.

• 16-level damping force adjustment for precise ride tuning
• Hydraulic Bump Stopper (HBS) technology reduces impact harshness and prevents bottoming out
• Twin-tube internal construction for consistent performance and durability
• Direct-fit OE-style mounting points for a straightforward installation
• High-strength steel bodies finished in Tein's signature rust-resistant green powder coat
• Compatible with EDFC (Electronic Damping Force Controller) for in-cabin adjustment

Fits 2019+ Mazda 3 models.

The Tein EnduraPro Plus Complete Kit is a high-performance, OE-shape suspension upgrade designed to replace your factory shocks and struts while utilizing original mounting points. This complete set of four dampers features 16-level damping force adjustment, allowing you to tune the ride quality between comfort and sport settings. Engineered with a twin-tube system and Tein’s Hydraulic Bump Stopper (HBS) technology, these units maintain stability and prevent bottoming out over harsh impacts, making them an ideal choice for drivers seeking improved handling without the need for a full coilover conversion.

• Includes complete set of front struts and rear shocks
• 16-level damping force adjustment for personalized ride control
• OE-shape design for compatibility with factory or aftermarket lowering springs
• Hydraulic Bump Stopper (HBS) system improves comfort under heavy loads
• Durable twin-tube internal construction
• High-performance damper oil with anti-foaming properties
• Anti-rust powder coat finish for long-term corrosion resistance

Fits 2019-2024 Toyota Corolla Hatchback models (MZEA12L).

Tein Flex Z coilovers offer a complete suspension solution designed to enhance the handling and stance of your Corolla Hatchback without sacrificing ride quality. These dampers use a twin-tube system for improved stroke and reliability on the street. The full-length adjustability allows you to set your preferred ride height by adjusting the case length, ensuring full spring travel is maintained at any setting for consistent performance.

• Full-length ride height adjustment for independent height and spring preload settings
• Twin-tube internal design for superior comfort and performance
• 16-level damping force adjustment for precise suspension tuning
• Compatible with Tein EDFC series for in-cabin damping control
• High-strength steel construction with powder-coated finish and ZT coating for superior corrosion resistance
• Includes upper mounts for a direct-replacement installation

Fits 1986-1992 Toyota Supra.

Tein Flex Z coilovers provide a comprehensive suspension solution for the A70 chassis, balancing aggressive handling with street-driven comfort. Utilizing a twin-tube internal design, these coilovers offer a smoother stroke to better absorb road irregularities while maintaining composure during high-speed cornering. The Flex Z series features a sealed-structure design, optimized for durability and value, where the entire damper cartridge is replaced when service is eventually required.

• 16-way linear damping force adjustment to fine-tune ride quality and handling response
• Full-length height adjustment system allows for precise ride height changes without sacrificing spring travel or preload
• Twin-tube construction for improved reliability and ride comfort on varied road surfaces
• Specialized ZT surface coating and powder-coated brackets for maximum corrosion resistance
• Includes vehicle-specific upper mounts for a direct-fit, bolt-on installation
• Compatible with Tein EDFC systems for electronic damping adjustment from the driver's seat

This kit includes a complete set of four coilovers, adjustment wrenches, and installation instructions to replace the aging factory dampers on your MK3 Supra.

Fits 2014-2018 Infiniti Q50 Hybrid (HV37).

Tein EnduraPro Plus dampers are high-performance, OE-shape replacements designed to significantly improve ride quality and handling without the complexity of a full coilover conversion. These shocks feature a 16-level damping force adjustment system, providing the flexibility to tune your suspension for daily comfort or aggressive driving. Built with Tein's proprietary Hydraulic Bump Stopper (HBS) technology, these dampers internally dissipate impact energy, preventing the harsh bottoming-out sensation common on rough roads while maintaining vehicle stability and control.

• 16-level damping force adjustment for precision suspension tuning
• Hydraulic Bump Stopper (HBS) technology improves comfort and prevents bottoming out
• Twin-tube internal system ensures a smooth stroke and long-term reliability
• High-strength shell case and cold-formed steel construction for maximum durability
• Compatible with factory springs or aftermarket lowering springs
• Compatible with Tein EDFC for electronic damping control from the cabin
• Signature Tein green powder coat finish for superior corrosion resistance

Fits 1998-2005 Lexus GS300 (JZS160L).

Tein Flex Z coilovers offer a high-quality, made-in-Japan suspension solution for the JZS160L chassis, designed to balance street comfort with improved handling. As part of the Flex Z series, these dampers feature a sealed-structure design, which allows for a lower price point while maintaining the precision engineering Tein is known for. The twin-tube system provides a longer stroke and smoother initial movement, making them ideal for daily driven cars that see spirited use.

• 16-level damping force adjustment (simultaneous compression and rebound)
• Full-length ride height adjustment via the lower bracket for independent preload and height settings
• Twin-tube internal construction for superior ride quality on uneven surfaces
• ZT-coated adjustment threads and powder-coated damper bodies for maximum corrosion resistance
• Includes upper mounts specifically designed for the Lexus GS300 factory mounting points
• Compatible with Tein EDFC (Electronic Damping Force Controller) for in-cabin tuning

Fits 2005-2009 Subaru Legacy (BL9/BP9).

Tein Flex Z coilovers provide a complete suspension solution for the Subaru Legacy, balancing daily driving comfort with improved handling response. This system utilizes a twin-tube internal design that excels at absorbing road imperfections while maintaining stable damping performance during spirited driving. By replacing the factory struts and springs, the Flex Z kit allows for precise control over your vehicle's stance and cornering characteristics.

• Twin-tube internal construction for optimized street comfort and stroke.
• 16-level linear damping force adjustment to fine-tune ride quality and handling.
• Full-length ride height adjustment allows lowering without sacrificing suspension travel.
• ZT-coated shock bodies provide superior protection against rust and debris.
• High-tensile SAE9254 steel cold-formed springs for maximum sag resistance.
• Compatible with Tein EDFC (Electronic Damping Force Controller) for in-cabin adjustments.
• Sealed structure design ensures high reliability and consistent performance.

Each kit is designed as a direct bolt-on replacement for the factory suspension, featuring high-quality components and precise fitment for the BL9/BP9 chassis.

Fits 2000-2005 Lexus IS300 (JCE10L).

Tein Flex Z coilovers deliver a high-performance suspension solution without sacrificing street drivability. Featuring a twin-tube internal design, these dampers provide a smooth stroke that absorbs road imperfections while maintaining the lateral stability required for spirited driving. The full-length adjustment system allows you to tune your ride height by adjusting the lower bracket, ensuring you achieve the perfect stance without compromising spring travel or preload.

• Twin-tube system for a comfortable ride on various road surfaces
• 16-level damping force adjustment for precise tuning of compression and rebound
• Full-length ride height adjustment system with independent preload settings
• Includes pre-assembled upper mounts for a direct bolt-on installation
• Sealed-structure design for high reliability and cost-performance
• ZN6 coating on shock bodies for maximum protection against corrosion and debris
• Compatible with EDFC series for electronic in-cabin damping control

Each kit includes four complete coilover assemblies (front and rear) and the necessary adjustment wrenches to dial in your Lexus IS300 suspension.

Fits 2014-2015 Lexus IS250, 2016+ IS200t, and 2014+ IS350 (ASE30L, GSE30L, and GSE31L).

Tein Flex Z coilovers provide a high-performance suspension solution without compromising street drivability. Utilizing a twin-tube system for improved stroke and comfort, the Flex Z series features full-length ride height adjustability, allowing you to lower your Lexus IS without affecting spring travel or preload. This ensures consistent handling characteristics whether you are looking for a subtle drop or a more aggressive stance.

Engineered for durability and precision, these dampers feature 16-level linear damping force adjustment, enabling you to fine-tune the suspension for daily commuting or spirited driving. The bodies are finished in Tein's signature green powder coating, while the adjustment threads utilize a specialized ZT coating to resist corrosion and seizing in harsh environments.

• Twin-tube internal design for a balanced ride and superior damping control
• Full-length ride height adjustment system with independent preload settings
• 16-level damping force adjustment (compression and rebound combined)
• Sealed, non-reconstructible structure for high reliability and value
• High-strength reinforced rubber or pillow ball upper mounts included
• Cold-formed SAE9254V steel springs
• Compatibility: Lexus IS200t (2016+), IS250 (2014-2015), IS350 (2014+)
• Chassis Codes: ASE30L, GSE30L, GSE31L

Fits 2002-2007 Subaru Impreza.

The Tein Flex Z coilover system provides a high-performance suspension solution for the 2002-2007 Subaru Impreza, balancing street-driven comfort with circuit-ready handling. This series features a sealed-structure design that maintains Tein's rigorous manufacturing standards while offering a versatile range of adjustability for enthusiasts looking to refine their vehicle's stance and response.

• 16-level damping force adjustment for combined compression and rebound tuning.
• Full-length ride height adjustment allows you to set vehicle height independently of spring preload.
• Twin-tube internal construction for a smoother stroke and better compliance on uneven road surfaces.
• ZC-coated shell case and powder-coated brackets for superior corrosion resistance and durability.
• Complete bolt-on kit replaces the factory strut assemblies with high-quality, pre-assembled components.

Fits 1990-1999 Toyota MR2 (SW20L / SW21L).

Tein Flex Z coilovers provide a comprehensive suspension solution for the second-generation Toyota MR2, balancing street comfort with performance handling. This system replaces the aging factory struts and springs with a fully adjustable setup, allowing for precise ride height tuning without sacrificing spring travel or preload. Utilizing a twin-tube internal design, these coilovers offer exceptional damping characteristics over varied road surfaces, making them an ideal choice for both daily driving and spirited use.

• Specifically engineered for the 1990-1999 Toyota MR2 (SW20L / SW21L) chassis
• Full-length ride height adjustment system for independent height and preload settings
• Twin-tube internal construction for improved ride quality and reliability
• Direct bolt-on installation to factory mounting points
• High-durability powder coat finish for superior corrosion resistance
• Includes all necessary hardware for a complete four-corner installation

Fits 2005-2007 Subaru WRX STI (GDF D/E).

Tein Flex Z coilovers deliver a high-performance suspension solution for the Subaru WRX STI, offering full height adjustability and damping control in a reliable, sealed-structure design. Engineered for enthusiasts who demand better cornering response and a lowered stance without sacrificing street driveability, the Flex Z series utilizes a twin-tube internal system. This design provides a longer stroke compared to mono-tube alternatives, ensuring better compliance over road imperfections.

• Full-length ride height adjustment allows you to lower your vehicle without altering spring preload or stroke
• 16-level linear damping force adjustment to fine-tune handling between street and track settings
• Twin-tube construction for enhanced durability and ride comfort on various road surfaces
• ZT coating on the threaded body provides superior protection against corrosion and debris
• Sealed-structure design uses high-quality replacement cartridges for simplified long-term maintenance
• Compatible with Tein EDFC (Electronic Damping Force Controller) for real-time adjustments from the driver seat
• Includes upper mounts (camber adjustable for front MacPherson strut applications)

Fits 2018+ Toyota Camry SE, XSE, and V6 models (AXVA70L/GSA70L).

Tein Flex Z coilovers provide a comprehensive suspension solution for Toyota Camry owners seeking a balance between daily ride quality and improved handling. This full-length adjustable system allows for precise ride height settings independently of spring preload, ensuring you maintain full suspension travel even at lower ride heights. The twin-tube internal design is engineered to absorb road imperfections effectively, while the 16-level damping adjustment allows you to fine-tune the suspension for specific driving conditions or passenger loads.

• Full-length height adjustment via the threaded bottom bracket preserves stroke
• 16-level damping force adjustment (combined compression and rebound)
• Twin-tube internal structure for superior comfort on street surfaces
• High-strength steel construction with corrosion-resistant ZT coating on threads
• Specifically valved for Camry SE, XSE, and V6 chassis (AXVA70L/GSA70L)
• Tein Part Number: VSTG8-C1AS3

Fits 2020-2024 Subaru BRZ and 2024 Toyota GR86.

Tein Flex Series coilovers provide a comprehensive suspension solution for drivers looking to improve handling precision and customize vehicle aesthetics. This full-length adjustable system allows for independent ride height and spring preload settings, ensuring you can achieve your desired stance without compromising suspension stroke or ride quality.

Engineered with a twin-tube internal design, these coilovers prioritize street comfort while maintaining the lateral stability required for spirited driving. The 16-level linear damping adjustment allows you to fine-tune the rebound and compression to suit road conditions or track requirements. Each kit is finished with Tein's signature green powder coating and ZT coating on the threads for long-term corrosion resistance and easy adjustment in all climates.

• Full-length ride height adjustment via threaded damper body
• 16-level linear damping force adjustment
• Twin-tube construction for optimal street and highway comfort
• High-tensile SAE9254 steel springs for sag resistance
• Powder-coated damper bodies and specialized ZT coating for durability
• Includes adjustment wrenches and necessary mounting hardware

Fits 2012-2014 Lexus IS F.

Tein Flex Z coilovers provide a high-quality, full-length adjustable suspension solution for the 2012-2014 Lexus IS F. Designed to balance street comfort with performance handling, the Flex Z series utilizes a twin-tube internal system for a smoother stroke and better reliability on uneven road surfaces. This kit is a complete bolt-on solution, featuring vehicle-specific upper mounts to simplify installation and ensure precise fitment.

The Flex Z system features 16-level damping force adjustment, allowing you to fine-tune rebound and compression simultaneously to match your driving style. Because these are full-length adjustable, you can set your desired ride height by adjusting the lower bracket rather than the spring seat, preserving full suspension stroke and ride quality even at lower settings.

• Twin-tube internal construction for improved ride quality and durability
• 16-level damping force adjustment (combined compression and rebound)
• Full-length ride height adjustment system preserves spring travel
• Includes reinforced rubber or pillowball upper mounts for a direct fit
• Finished in Tein signature green powder coating for superior corrosion resistance
• Compatible with Tein EDFC (Electronic Damping Force Controller) for in-cabin adjustment

Fits 2009-2021 Nissan 370Z.

The Tein Flex Z Damper Kit provides a comprehensive coilover solution for the Nissan 370Z (Z34), engineered to balance daily street comfort with the performance required for spirited driving. Utilizing a twin-tube internal system, these dampers offer a longer stroke and smoother response over road imperfections compared to traditional mono-tube setups. The Flex Z series features a sealed-structure design, which allows for premium Japanese manufacturing quality while utilizing replacement cartridges for long-term maintenance.

• 16-level linear damping force adjustment to tune for street or track conditions
• Full-length ride height adjustment allows for a lower center of gravity without affecting spring stroke
• Twin-tube construction for enhanced ride quality and durability
• Specialized ZT coating on adjustment threads to prevent corrosion and seizing in harsh environments
• EDFC compatible for electronic in-cabin damping adjustments (sold separately)
• Includes reinforced upper mounts and adjustment wrenches for a direct-fit installation

This kit replaces the factory struts and springs, bolting directly to OEM mounting points to provide a significant upgrade in handling and aesthetics.

Fits 2015-2021 Subaru WRX and WRX STI (VA chassis).

The Tein RX1 coilover system provides a high-performance suspension solution for the 2015-2021 Subaru WRX and STI, balancing street comfort with track-ready handling. The RX1 series utilizes a full-length ride height adjustment system, allowing you to lower your vehicle's center of gravity without compromising suspension stroke or spring preload. Featuring Tein's Hydraulic Bump Stopper (H.B.S.) technology, these coilovers effectively absorb heavy impacts at the limit, maintaining vehicle stability and preventing the harsh bottoming-out sensation common on lowered cars.

• 16-level linear damping force adjustment for simultaneous compression and rebound control
• Full-length height adjustment allows independent tuning of ride height and spring preload
• Hydraulic Bump Stopper (H.B.S.) improves comfort and handling during high-load cornering
• Compatible with Tein EDFC (Electronic Damping Force Controller) for real-time in-cabin adjustments
• Front camber-adjustable pillowball upper mounts included for precise alignment tuning
• Cold-formed SAE9254V steel springs and powder-coated damper bodies for maximum durability
• Includes all four coilovers, adjustment wrenches, and installation hardware

Whether you are fine-tuning your VA-chassis for the local autocross or looking for a more composed daily drive, the RX1 series offers the adjustability and build quality required to maximize the Subaru AWD platform.