The Firestone Air Adjustable Leveling Control Panel (2225) provides convenient, on-the-fly management of your vehicle's air suspension system directly from the cab. Designed for single-path inflation, this panel allows you to monitor and adjust air spring pressure to compensate for varying load weights and road conditions, ensuring a level ride and improved stability.

This unit features a high-visibility white face gauge with a 0-150 psi readout for precise monitoring. The integrated toggle switch gives you manual control over inflation and deflation, making it easy to tune your suspension performance without needing to find an external air source or stop the vehicle.

• Provides instant monitoring and adjustment for air helper springs
• Single analog gauge with white face and clear 0-150 psi increments
• Integrated toggle switch for easy inflation and deflation control
• Designed for dashboard or under-dash mounting
• Compatible with Firestone air accessory systems and compressors
• Manufacturer Part Number: 2225

Maintain precise control over your vehicle's stance and load-carrying capacity with the Firestone Single Gauge Pneumatic Air Control Panel. Designed to integrate into your dashboard or a mounting bracket, this in-cab controller allows you to adjust air spring pressure on the fly to compensate for varying road conditions, heavy trailers, or off-center loads.

• Real-Time Monitoring: Includes a high-visibility analog gauge with a 0-150 psi sweep for accurate pressure tracking.
• Manual Adjustment: Features a pneumatic toggle switch to inflate or deflate your air springs directly from the driver's seat.
• Reliable Performance: Engineered as a durable mechanical interface for Firestone air accessory systems and load-leveling kits.
• Part Number: Firestone 2149.

This control panel is a vital component for drivers who need an instant air source and straightforward manual management of their pneumatic suspension system.

Restore the functionality of your air suspension control system with this genuine Air Lift WirelessOne Replacement Manifold. As the central hub of your on-board air system, this manifold manages air distribution to your springs and facilitates communication between your wireless controller or mobile app and the compressor.

Designed to replace a damaged or malfunctioning unit, this manifold allows you to regain precise control over your vehicle's leveling without requiring a full system overhaul. It integrates directly with your existing WirelessOne plumbing and electrical harness for a straightforward repair that ensures your air springs maintain the correct pressure for hauling or towing.

• Direct replacement component for the Air Lift WirelessOne on-board air system
• Restores wireless inflation and deflation capabilities via remote or smartphone app
• Internal solenoids and sensors provide accurate pressure management
• Weather-resistant construction for reliable performance under the vehicle
• Simplifies system repairs by utilizing existing wiring and air lines

Restore the functionality of your air suspension control system with this genuine Air Lift WirelessAIR Replacement Manifold. As the central hub for your onboard air system, this manifold manages the air distribution and electronic communication required to adjust your air springs remotely. It serves as a direct-fit replacement for a damaged or malfunctioning unit, ensuring you regain reliable, wireless control over your vehicle's leveling and load support.

• Direct replacement for the original Air Lift WirelessAIR system manifold
• Restores precise wireless inflation and deflation control for air springs
• Built with a weather-resistant housing for durable under-chassis mounting
• Engineered to integrate seamlessly with existing WirelessAIR wiring harnesses and air lines

Fits 2017+ Honda Civic Si (FC1/FC3) and 2018+ Honda Accord Touring (CV1/CV2) models equipped with factory electronic suspension.

Upgrading to high-performance aftermarket coilovers often requires removing the factory Adaptive Damper System (ADS). Removing these electronic dampers triggers a persistent suspension error light on the dashboard and may lock out certain drive mode features. The Tein Error Canceller Kit provides a reliable plug-and-play solution, simulating the presence of the original dampers to keep the ECU clear of fault codes.

• Eliminates dash-displayed suspension warning lights and ADS error codes
• Restores functionality to vehicle systems affected by suspension fault signals
• Durable electronic modules designed to withstand the heat and vibration of the wheel well environment
• Plug-and-play connectors require no wire splicing or permanent modification to the factory harness
• Essential for Civic Si and Accord Touring owners transitioning to non-electronic coilovers

Fits 2017-2021 Honda Civic Type R (FK8).

Upgrading the factory electronic dampers on the FK8 Civic Type R to aftermarket coilovers often triggers a suspension system warning light because the ECU can no longer detect the factory actuators. The Tein Error Canceller Kit provides the necessary electrical bypass to eliminate these dashboard error codes, ensuring your vehicle's drive mode systems remain functional and error-free after a coilover conversion.

• Prevents dashboard suspension error lights and warning messages
• Maintains functionality of factory drive modes
• Plug-and-play design for easy installation into factory wiring harnesses
• Durable construction designed to withstand automotive environments
• Essential for vehicles removing factory electronic damping systems

The Tein EDFC5 Active Pro Controller Kit brings advanced automation to your vehicle's suspension system. Designed for use with compatible Tein coilovers, this system allows for instant, in-car damping force adjustment, eliminating the need to manually turn adjustment dials on the shock absorbers. The EDFC5 introduces "Jerk-based" control, an industry-first technology that senses the rate of change in G-force to adjust damping even before the car begins to roll or pitch, providing a flatter and more stable ride during aggressive cornering and braking.

• Jerk-Based AI Control: Predicts vehicle behavior by monitoring the rate at which G-forces are applied for proactive damping response.
• Automatic Dynamic Adjustment: Changes damping force in real-time based on G-force and vehicle speed (when connected to GPS or speed signal).
• Wireless Communication: Simplifies the installation process by using wireless motor drivers to connect the cabin-mounted controller to the dampers.
• High-Speed Response: Compatible with Tein’s high-speed stepping motors for rapid, precise damping changes across 16, 32, or 64 levels.
• Individually Adjustable: Allows for independent control of all four dampers or synchronized front/rear adjustment.

The kit includes the main EDFC5 control unit, a built-in G-sensor, and the necessary power wiring. Note that EDFC-compatible stepping motors and motor driver units are required for a complete installation and are sold separately.

Fits 2019-2021 BMW 3-Series and 4-Series (G2X) RWD and xDrive models.

Upgrading to manually adjusted performance shocks or coilovers on a vehicle equipped with factory Electronic Damper Control (EDC) typically triggers dashboard error messages and can affect other drive mode settings. The Ohlins EDC Cancellation Kit (35020-30) is engineered to solve this, providing a bypass for the factory semi-active shock signals.

Designed for straightforward integration, this kit is primarily a plug-and-play solution that eliminates dash lights without requiring permanent modifications or complex ECU re-coding. It is a necessary component for enthusiasts installing Ohlins Road & Track or similar manual suspension systems on EDC-equipped BMW G2X chassis vehicles.

• Suppresses dashboard warnings associated with the removal of OE semi-active dampers
• Maintains vehicle diagnostic integrity by providing the ECU with the expected signal
• Specifically compatible with BMW G20 and G22 chassis configurations (RWD and xDrive)
• Robust, direct-fit connectors for reliable operation under spirited driving conditions
• Manufacturer Part Number: 35020-30

The Firestone 9402 Sealed Air Pressure Switch provides precise, automated control for your vehicle's air suspension compressor. This heavy-duty switch is designed to monitor air tank levels, automatically activating the compressor when pressure drops to 110 PSI and cutting power once it reaches 145 PSI. This ensures your air springs maintain the necessary pressure for load-carrying and ride stability without manual intervention.

Engineered for durability in demanding environments, this switch features a sealed design that protects internal electrical contacts from moisture, dust, and road grime. This makes it an ideal choice for frame-mounted air management systems where exposure to the elements is common. It integrates seamlessly into 12-volt DC systems to provide a reliable trigger for your compressor relay.

• Operating Range: 110 PSI cut-in / 145 PSI cut-out
• Sealed construction for weather and debris resistance
• Single terminal configuration for simplified wiring
• Designed for use with 12V DC compressor systems
• Manufacturer Part Number: 9402

Fits select 2005-2015 Cadillac CTS-V and Chevrolet Corvette (Base, Grand Sport, Z06, ZR1).

The aFe CONTROL Electronic Shock Delete Modules provide a seamless solution for enthusiasts upgrading to aftermarket shocks or coilovers on vehicles originally equipped with GM MagneRide electronic shock absorbers. These plug-and-play modules eliminate the suspension control check engine light and prevent the Body Control Module from imposing an 80mph speed limiter when factory electronic shocks are disconnected.

This kit includes both the Shock Delete Modules and the Ride Height Simulator Modules. Using these components together is mandatory when replacing MagneRide dampers; omitting either will trigger system error codes. The simulators allow you to install lowering or lift kits without disturbing the factory suspension control logic or compromising vehicle performance.

• Direct-fit installation requires no wiring modifications
• Eliminates suspension control error lights and speed limiters
• Genuine GM-style Metri-Pack connectors for secure fitment
• Potted with high-temperature thermal epoxy for durability
• Manufacturer Part Number: 436-401005-B
• Proudly made in the USA

Fits 2016-2020 Audi A4, S4, RS4, A5, S5, and RS5 (B9 Chassis).

The Ohlins Cancellation Kit is the professional solution for owners upgrading from factory semi-active or electronic damping systems to manually adjustable performance shocks or coilovers. Removing original equipment (OE) adaptive dampers typically triggers dashboard warning lights and can cause the vehicle to enter restrictive electronic modes. This kit effectively bypasses the system by providing the correct electrical resistance to the ECU.

• Eliminates dashboard error codes and warning lights associated with OE shock removal
• Ensures clean integration when installing performance aftermarket suspension
• Seamless plug-and-play installation into factory wiring harnesses
• Reliable operation designed to withstand automotive heat and vibration
• Manufacturer Part Number: 35020-31

Fits 2021-2024 BMW M2, M3, and M4 models (Base, Competition, xDrive, CS, and CSL).

When upgrading your BMW to high-performance manually adjustable shocks or coilovers, the factory Electronic Damper Control (EDC) system will trigger dashboard warning lights and error codes. The Ohlins 35020-33 Cancellation Kit is designed to bypass this system, effectively signaling to the ECU that the factory semi-active dampers are still present and functioning. This allows you to utilize performance suspension without compromising the vehicle's electronic diagnostics or safety systems.

• Eliminates dash warning lights associated with EDC/semi-active shock removal
• Straightforward plug-and-play installation into factory harness points
• Essential for vehicles upgrading to Ohlins Road & Track or other non-electronic dampers
• Maintains full functionality of other vehicle drive modes
• Manufacturer Part Number: 35020-33

Fits 2009-2016 Audi A4, A5, S4, and S5 models equipped with factory semi-active suspension.

The Ohlins DCC Cancellation Kit (MPN 35020-19) is the professional solution for eliminating dashboard warning lights and error codes that occur when replacing OE electronically controlled dampers with manually adjusted performance shocks or coilovers. This kit allows you to upgrade your suspension system without triggering fault codes in the vehicle's electronic chassis control module.

• Error-Free Operation: Removes dash lights associated with removing factory semi-active shocks to prevent limp-mode or diagnostic errors.
• Plug-and-Play Installation: Designed to connect directly to the factory wiring harness with no cutting or splicing required in most applications.
• Precision Engineered: Specifically tuned to match the resistance and signal requirements of the Audi DCC system.
• Manufacturer Part Number: 35020-19

Fits 2012-2014 Volkswagen Golf (MK6) models equipped with factory Dynamic Chassis Control (DCC).

When upgrading the factory semi-active electronic suspension on your MK6 Golf to manually adjustable performance shocks or coilovers, the vehicle's ECU will trigger dashboard warning lights and error codes. The Ohlins DCC Cancellation Kit (35020-14) provides a reliable solution, simulating the presence of the original dampers to keep the chassis electronics functioning correctly.

Engineered for a straightforward installation, this kit allows drivers to enjoy the benefits of precision-tuned mechanical suspension without the distraction of persistent dash errors. This is a essential component for any Mk6 owner transitioning to high-performance manual dampers.

• Seamless Integration: Designed to disable dashboard warning lights associated with the removal of OE semi-active shocks.
• Plug-and-Play Design: Utilizes factory-style connectors for a direct interface with the vehicle's existing wiring harness.
• Application Specific: Precisely mapped for the Volkswagen Golf MK6 DCC architecture.
• Manufacturer Part Number: 35020-14

This genuine Tein Hex Set Screw kit is designed specifically for the EDFC Active and EDFC Active Pro electronic damping force control systems. These specialized fasteners are essential for properly securing the stepper motors to the shock absorber or adjustment assembly, ensuring precise and reliable damping changes.

Whether you are performing a fresh installation or replacing hardware lost during suspension maintenance, this kit provides the exact factory-spec fasteners required to maintain system integrity. Using genuine Tein hardware ensures proper thread engagement and vibration resistance within the EDFC motor housing.

• Designed for Tein EDFC Active and EDFC Active Pro systems
• Essential for securing stepper motors to the damper assembly
• Includes four (4) hex set screws
• Manufacturer Part Number: SAP44-P8463

The Tein EDFC Active GPS Kit (EDK07-P8022) is a specialized expansion module designed to enhance the capabilities of Tein EDFC Active and EDFC Active Pro damping controller systems. By providing real-time satellite speed data, this kit enables the controller to automatically adjust suspension damping based on vehicle speed, eliminating the need to hardwire a speed pulse signal from the vehicle's ECU or wiring harness.

• Speed-Dependent Damping: Automatically firms up or softens the dampers based on current travel speed for improved stability and comfort.
• High-Sensitivity Antenna: Features a high-performance GPS receiver for consistent signal acquisition and accurate speed tracking.
• Expanded Data Display: Unlocks additional information on the EDFC display, including vehicle speed, altitude, and a GPS-synchronized clock.
• Plug-and-Play Installation: Connects directly to the EDFC Active/Active Pro control unit with the included harness for a clean, reliable setup.
• Part Number: EDK07-P8022

This kit includes the GPS antenna unit and the necessary wiring harness for integration with your existing Tein electronic damping system.

Fits select 1989-2020 Acura, Honda, Mitsubishi, Nissan, Saab, Scion, Subaru, and Toyota models including Civic, Lancer, Impreza, and WRX/STI.

The Tein EDFC (Electronic Damping Force Controller) Strut Kit is a specialized hardware set designed to facilitate the installation of EDFC motors onto your adjustable Tein dampers. This kit provides the necessary brackets and mounting components to secure the stepping motors to the top of the strut piston rods, enabling precise, in-cabin adjustment of your suspension's damping force. By integrating this kit with your EDFC system, you can transition between street comfort and track stiffness without ever leaving the driver's seat or manual adjustment of the clicker knobs.

• Manufacturer Part Number: EDK06-K4474
• Designed for compatibility with Tein EDFC, EDFC II, and EDFC Active systems
• Provides secure mounting for electronic stepping motors to the shock/strut assembly
• Engineered to maintain proper clearance within the engine bay or trunk area
• Includes necessary installation hardware and vehicle-specific mounting brackets

Fits select 1989-2020 Acura, Honda, Mitsubishi, Nissan, Saab, Scion, Subaru, and Toyota models.

The Tein EDFC (Electronic Damping Force Control) Motor Kit is the core hardware needed to enable remote, in-cabin adjustment of your suspension's damping characteristics. These high-precision stepper motors mount directly to the top of your Tein coilovers, replacing the manual adjustment clickers and allowing you to fine-tune your ride quality on the fly.

This M12 / M14 kit is engineered for specific piston rod thread sizes common across a wide range of performance platforms. When paired with an EDFC controller, these motors provide rapid, repeatable changes to your damping force, letting you transition from compliant street settings to aggressive track damping in seconds.

• Manufacturer Part Number: EDK05-12140
• Hardware Thread Size: M12 / M14
• Enables electronic damping force adjustment via EDFC controller
• Compact stepper motor design for tight engine bays and trunk spaces
• Maintains precise control over suspension damping clicks

Fits select 1990-2020 Acura, Honda, INFINITI, Lexus, Mazda, Mitsubishi, and Nissan models including Integra, Civic, 350Z, and Miata.

The Tein EDFC (Electronic Damping Force Control) Motor Kit provides the mechanical interface needed to adjust your suspension's damping force from the driver's seat. These high-precision stepper motors bolt directly to the top of your Tein coilovers, replacing the manual adjustment knobs to allow for real-time damping changes when paired with an EDFC, EDFC Active, or EDFC Active Pro control unit. The M12 / M12 specification refers to the thread size required for compatibility with your specific damper shafts.

• Manufacturer Part Number: EDK05-12120
• Motor Specification: M12 / M12 thread pitch
• System Integration: Designed for use with Tein EDFC series controllers
• Precision Control: High-response stepper motors for accurate damping increments
• Durability: Built to withstand the engine bay and wheel well environment

The Tein EDFC Motor Kit (M10 / M14) is a critical component for the Electronic Damping Force Control system, enabling precision suspension tuning from the driver's seat. These stepping motors attach directly to the top of the damping adjustment rods on compatible Tein coilovers, replacing manual adjustment clicks with high-speed, accurate electronic control. This kit is designed for applications utilizing M10 and M14 thread sizes on the piston rods.

• Manufacturer Part Number: EDK05-10140
• Motor Thread Type: M10 / M14
• Enables real-time damping force adjustment in conjunction with EDFC controllers
• Replaces manual damping adjustment knobs with precision stepping motors
• Kit provides the necessary motors for electronic damping actuation

Fits select 2006-2020 Acura ILX, Honda Civic, Scion FR-S, Subaru BRZ/Forester, and Toyota 86 models.

The Tein EDFC Active Pro (Electronic Damping Force Controller) provides sophisticated, real-time control over your vehicle's suspension damping from the driver's seat. This Pro version features an integrated G-sensor that enables fully automated damping adjustments based on longitudinal and lateral G-forces, as well as speed-sensitive adjustment when paired with an optional GPS kit.

• Independent 4-Wheel Control: Unlike standard EDFC units, the Active Pro allows for independent damping adjustment at each corner for precise handling balance.
• Automated Adjustment: Automatically stiffens or softens the suspension in response to braking, acceleration, and cornering forces.
• Adjustable Increments: Choose between 16, 32, or 64 levels of damping force adjustment to suit your driving style.
• Visual Feedback: High-contrast display shows current damping settings and G-force data in real-time.
• MPN: EDK04-Q0349

The kit includes the main controller unit, internal G-sensor, and necessary wiring for installation. Note: Motor kits and GPS sensors are sold separately and are required for full functionality on compatible Tein coilovers.

Eliminate dashboard error lights when upgrading your Toyota Supra suspension with the DWCT215 Electronic Damper Control (EDC) Warning Canceller. This module is essential for drivers replacing factory-equipped electronic adaptive shocks with aftermarket coilovers or non-electronic dampers. It mimics the factory signal to prevent the ECU from triggering suspension fault codes or limp mode, ensuring your vehicle's drive systems operate as intended.

• Prevents EDC and adaptive suspension warning messages after damper removal
• Maintains original ECU functionality for related drive mode settings
• Direct plug-and-play installation using factory-style connectors
• Requires no permanent wiring modifications or splicing
• Manufacturer Part Number: DWCT215

Fits 2017-2024 Honda Civic Type R (FK8/FL5).

The RS-R Electronic Damper Control (EDC) Warning Canceller is an essential solution for Civic Type R owners upgrading their factory adaptive suspension to aftermarket coilovers or dampers. When the factory electronic shocks are removed, the vehicle's ECU detects the missing actuators, triggering a dashboard warning light and potentially limiting drive mode functionality. This canceller kit (DWCH059) provides the necessary resistance to simulate the presence of the OE dampers, maintaining an error-free system.

• Prevents electronic suspension warning lights when using aftermarket coilovers
• Allows for a clean, professional installation without ECU error codes
• Engineered specifically for the FK8 and FL5 chassis electronics
• Plug-and-play design for easy integration with factory wiring
• Manufacturer Part Number: DWCH059

Fits 2017-2020 Honda Civic Type R (FK8).

When upgrading the FK8 Civic Type R to high-performance manual coilovers or shocks, the factory Adaptive Damper System (ADS) must be disconnected. Removing the OE semi-active shocks triggers persistent dashboard warning lights and error codes as the ECU looks for electronic actuator signals. The Ohlins 35020-25 Cancellation Kit provides a clean, reliable solution by simulating the factory dampening signals.

This kit is designed for enthusiasts moving to manually adjustable performance suspension who want to maintain a clean interior display without diagnostic trouble codes (DTCs). The modules feature vehicle-specific connectors for a straightforward installation that integrates with the factory wiring harness.

• Eliminates suspension-related dash warning lights and error codes
• Essential for upgrading from OE semi-active shocks to manual performance suspension
• Direct plug-and-play installation into factory electronic damper connectors
• Specifically engineered for the 2017-2020 Honda Civic Type R (FK8) chassis
• Manufacturer Part Number: 35020-25

Fits 2016-2020 Audi RS3, TT, TTS, and TTRS (8V/8S chassis) models equipped with factory semi-active electronic suspension.

When upgrading from OE semi-active dampers to high-performance manual shocks or coilovers, the vehicle’s ECU will detect the missing electronic actuators, resulting in persistent dashboard warning lights and potentially restricted driving modes. The Ohlins DCC Cancellation Kit (35020-24) provides a clean, electronic solution by simulating the factory signals, allowing you to run performance suspension without electronic interference.

• Eliminates EDC/DCC dashboard warning lights and error codes
• Simple plug-and-play installation for most applications
• Uses OEM-style connectors for a secure, weather-resistant fit
• Essential for vehicles upgrading to manually adjusted performance shocks
• Manufacturer Part Number: 35020-24

Fits select 2006-2014 Audi A3, TT, TTS, and TTRS (8P and 8J chassis).

When upgrading from factory electronically controlled suspension (DCC) to manually adjustable performance dampers, the vehicle's ECU triggers dashboard error lights and fault codes because it can no longer detect the active shocks. The Ohlins 35020-22 DCC Cancellation Kit is designed to bypass these signals, allowing you to install aftermarket suspension without compromising the vehicle's electronic diagnostic systems.

• Eliminates suspension-related dashboard warning lights and error codes
• Essential for vehicles equipped with factory semi-active or Magnetic Ride systems
• True plug-and-play installation into the OE suspension wiring harness
• Ensures other vehicle systems continue to function without electronic interference
• Manufacturer Part Number: 35020-22

Fits 2015-2020 Volkswagen Golf (MK7) models equipped with factory DCC (Dynamic Chassis Control).

When upgrading your VW Golf MK7 to high-performance manual coilovers or shocks, removing the factory semi-active dampers triggers error messages and dashboard warning lights. The Ohlins DCC Cancellation Kit provides a clean, plug-and-play solution to bypass these electronic signals, allowing you to install aftermarket suspension without interfering with the vehicle's onboard diagnostics.

• Eliminates dashboard warning lights associated with removing OE semi-active shocks
• Maintains the integrity of the vehicle's electronic control systems
• Simple plug-and-play installation using factory-style connectors
• Designed specifically for the Volkswagen Golf MK7 chassis
• Manufacturer Part Number: 35020-15

Fits 2008-2013 BMW M3 (E90 Sedan, E92 Coupe, and E93 Convertible) models originally equipped with factory Electronic Damper Control (EDC).

When upgrading your BMW M3 to manual performance dampers or coilovers, the factory ECU will trigger error messages and dashboard warning lights because it can no longer communicate with the OE semi-active shocks. The Ohlins EDC Cancellation Kit (35020-04) provides a reliable, plug-and-play solution to eliminate these faults without needing complex ECU coding or wiring modifications.

• Eliminates suspension error codes and dash warning lights
• Maintains factory ECU communication for other vehicle systems
• Simple plug-and-play installation into original factory connectors
• Durable construction designed for high-performance automotive environments
• Specifically engineered for use when upgrading to manually adjusted shocks
• Manufacturer Part Number: 35020-04

Fits 2012-2018 BMW 3-Series and 4-Series (F3X) models equipped with Electronic Damper Control (EDC).

When upgrading your BMW's suspension to manually adjustable performance coilovers or shocks, the removal of the factory semi-active dampers triggers error codes and dashboard warning lights. The Ohlins 35020-03 Cancellation Kit provides a straightforward solution, simulating the presence of the original electronic dampers to maintain the integrity of the vehicle's control systems.

Designed for a clean installation, this kit features plug-and-play connectors that interface directly with the factory wiring harness. This ensures a secure connection and a professional finish without the need for wire splicing or permanent vehicle modifications.

• Eliminates EDC/Electronic Damper dashboard warning lights
• Essential when upgrading to non-electronic performance shocks or coilovers
• Plug-and-play installation into factory connectors
• Includes all necessary modules for a complete vehicle set
• Manufacturer Part Number: 35020-03

Fits 2016-2020 BMW M2, M3, and M4 (F8X).

The Ohlins EDC Cancellation Kit is the essential solution for BMW F8X owners upgrading from factory semi-active suspension to manually adjustable performance dampers or coilovers. Removing the factory Electronic Damping Control (EDC) shocks typically triggers persistent dashboard warning lights and fault codes. This kit provides a seamless electronic bypass, ensuring the vehicle's ECU remains clear of suspension-related errors.

• Prevents EDC error codes and dashboard warning lights after shock removal
• Maintains the integrity of other vehicle electronic systems
• Simple plug-and-play installation into factory wiring harnesses
• Compatible with all manually adjustable aftermarket suspension brands
• Complete set for all four corners of the vehicle

Manufacturer Part Number: 35020-02