Fits 2022-2026 Chevrolet Silverado 1500 and GMC Sierra 1500 (including Diesel models).

Developed for technical trails and heavy-duty off-road use, the Eibach PRO-TRUCK Stage 2R system provides precision damping control and ride-height adjustability. This kit combines height-adjustable PRO-TRUCK Coilover 2.0 front units with PRO-TRUCK Reservoir dampers for the rear, ensuring consistent performance and heat dissipation no matter how much the terrain demands from your suspension.

• Front PRO-TRUCK Coilover 2.0s allow for adjustable ride height to level the vehicle or accommodate larger tires.
• Rear PRO-TRUCK Reservoir Sport Shocks feature an external reservoir for increased oil capacity and fade resistance.
• Anodized 6061-T6 billet aluminum coilover mounts for high-strength durability.
• 46mm piston monotube design with nitrogen-filled variable force valving.
• Individually dyno-tested to ensure matched performance and reliability across all components.
• Heavy-duty bushing system is cycle-tested for long-term service life in harsh environments.
• Engineered, tested, and manufactured by Eibach in the U.S.A.

Fits 2022-2026 Chevrolet Silverado 1500 and GMC Sierra 1500 (3.0L).

The Eibach PRO-TRUCK-LIFT STAGE 2 system provides a significant upgrade in front-end adjustability and off-road performance. Building on the foundation of the Stage 1 system, this kit adds front 2.0 coilovers featuring an extended-travel monotube design. These units utilize variable force valving to provide crisp, controlled handling on the pavement while maintaining the compliance necessary for maximum traction on technical trails.

Each coilover is equipped with Eibach Race Springs (ERO) and features an adjustable threaded spring perch, allowing you to fine-tune the ride height to accommodate increased loads or larger tire clearances. Every shock and coilover is individually dyno-tested to ensure matched performance across the axle and long-term reliability.

• Front PRO-TRUCK Coilover 2.0s with adjustable ride height
• Rear PRO-TRUCK Sport Shocks for improved damping control
• Anodized 6061-T6 billet aluminum coilover mounts
• Large 46mm pistons and monotube design with nitrogen-filled variable force valving
• Heavy-duty bushing system cycle-tested for durability
• Designed and manufactured by Eibach in the U.S.A.

Fits 2022-2026 Chevrolet Silverado 1500 and GMC Sierra 1500 (3.0L Turbo Diesel).

Eibach PRO-TRUCK COILOVER 2.0 systems are engineered for drivers seeking both on-road refinement and off-road capability. Utilizing an extended-travel monotube design and nitrogen-filled variable force valving, these coilovers provide consistent damping and maximum traction on technical trails. The adjustable threaded spring perch allows for fine-tuning the front ride height between 0.4 and 2.6 inches, making it easy to accommodate heavier loads or larger tire and wheel packages.

These units come pre-assembled for a direct-fit, bolt-on installation, replacing the factory front struts without additional hardware. Each coilover features 6061-T6 billet aluminum mounts, a large 46mm piston, and Eibach ERO Off-Road Race Springs. To ensure long-term reliability, every unit is individually dyno-tested and the heavy-duty bushing system is cycle-tested for durability.

• Adjustable front lift height: +0.4" to +2.6"
• 46mm monotube design with variable force valving
• Anodized 6061-T6 billet aluminum mounts
• Equipped with Eibach ERO Off-Road Race Springs
• Pre-assembled for factory direct replacement
• Individually dyno-tested for matched performance
• Sold as a pair
• Engineered and manufactured by Eibach in the U.S.A.

Fits 2015-2023 Ford Mustang models, including EcoBoost, V6, GT, Bullitt, Mach 1, and Shelby GT350/GT500 (2.3L / 3.7L / 5.0L).

The Eibach Sportline-Plus Kit is the ultimate suspension tuning package for the S550 and S650 Mustang enthusiast. By combining Eibach's aggressive Sportline lowering springs with the precision-engineered Anti-Roll-Kit sway bars, this system provides a complete handling overhaul. This combination significantly lowers the vehicle's center of gravity, drastically reduces body roll during cornering, and minimizes nose-dive under hard braking and rear-end squat during acceleration.

Every component is engineered to work in harmony, utilizing high-tensile strength spring steel and cold-formed, solid steel sway bars for consistent performance. The result is a Mustang that tracks flatter through corners with increased steering response and a more aggressive stance. This kit is a direct bolt-on installation that utilizes factory mounting points and requires no permanent vehicle modifications.

• Includes Sportline lowering springs and Anti-Roll-Kit sway bars
• Reduced body roll and improved turn-in response
• Lowered center of gravity for superior balance and stability
• Engineered for use with original equipment (OE) dampers or performance shocks
• Direct bolt-on fitment for select 2015-2023 Mustang models
• Manufacturer Part Number: 4.14535.880

Fits select 2007-2020 Chevrolet Suburban 1500 and Tahoe models (5.3L V8).

Eibach Pro-Lift-Kit springs are precision-engineered to provide a 2.5-inch suspension lift for your SUV without the compromises of coilover swaps or spacer kits. By replacing the factory front springs, these units allow for a full range of suspension travel, maintaining proper geometry to minimize stress on your control arm bushings and ball joints. This kit provides the necessary fender clearance for larger wheel and tire packages while improving overall ground clearance for off-road obstacles.

Manufactured in the USA, these springs are designed to offer excellent on-road stability and predictable handling characteristics whether you are commuting or hitting the trail.

• Provides 2.5 inches of front lift height
• Compatible with factory shocks or Eibach Pro-Truck Sport shocks
• Maintains suspension travel and reduces stress on drivetrain components
• Increases ground clearance and allows for larger tire fitment
• Made in the USA
• Manufacturer Part Number: E30-23-030-01-20
• Includes: Pair of front lift springs

Fits 2024-2026 Toyota Land Cruiser 1958, Base, and First Edition models (2.4L).

The Eibach PRO-TRUCK Sport rear shock absorber is engineered to provide superior damping and vehicle control for the latest generation Toyota Land Cruiser. Utilizing a high-pressure monotube design, these shocks are built to handle both daily street driving and technical off-road terrain. The large-diameter 46mm piston delivers consistent performance by reducing fluid aeration, while the nitro-coated shaft ensures long-term durability under harsh conditions.

Designed as a direct replacement for the factory rear units, these shocks feature weather-resistant zinc-coated bodies and can accommodate rear lift heights from 0 to 1.5 inches. Whether you are correcting the ride quality of a stock SUV or outfitting a rig for overland use, the PRO-TRUCK Sport series provides the necessary damping stability to manage added cargo and challenging trails.

• Monotube high-pressure design for maximum fade resistance
• Heavy-duty 46mm piston for precise damping control
• Nitro-coated shaft and zinc-coated weather-resistant shock body
• Accommodates 0" to 1.5" of rear lift
• Direct fitment to factory mounting points
• Made in the U.S.A.
• Manufacturer Part Number: E60-82-108-01-01

Fits 2024-2026 Toyota Land Cruiser 1958, Base, and First Edition (2.4L).

The Eibach HD Rear Pro Lift Kit is engineered for Land Cruiser owners who require additional support for heavy rear-axle loads without the complexity of air bags or the compromise of spring spacers. These heavy-duty springs serve as a direct-fit replacement for standard lift springs, providing the necessary rate to maintain a level ride height when the vehicle is equipped with aftermarket bumpers, tire carriers, or overland gear.

• Precision-engineered for improved off-road capability and increased ground clearance.
• Provides additional fender clearance for larger wheel and tire combinations.
• Enhanced on-road stability and predictable handling under load.
• Manufactured by Eibach in the U.S.A.
• Manufacturer Part Number: E30-82-108-02-02

Fits select 2019-2026 Chevrolet Silverado 1500, Silverado 1500 LTD, GMC Sierra 1500, and Sierra 1500 Limited (5.3L).

Eibach Pro-Lift-Kit front springs are designed to provide a suspension lift for your truck without the mechanical compromises of spacer lifts or the complexity of full coilover systems. These springs allow for a full range of suspension travel, preventing the premature wear on bushings and ball joints commonly associated with spacer blocks.

By increasing front-end height, this kit provides additional ground clearance and the fender room needed for larger wheel and tire combinations. Precision-engineered for the 5.3L V8 platform, these springs improve off-road capability while maintaining excellent on-road stability and predictable handling characteristics.

• Precision engineered for improved off-road capability and ground clearance
• Provides additional fender clearance for larger wheel and tire packages
• Maintains full suspension travel and factory geometry
• Excellent on-road stability and handling
• Manufactured in the USA
• Manufacturer Part Number: E30-23-032-01-20

Fine-tune your vehicle's handling dynamics with the Eibach ERS (Eibach Race Spring) system. This 10.00-inch coil-over spring is engineered for precision performance across diverse racing and off-road applications, designed to provide maximum travel while maintaining a minimal block height. This specialized construction allows for more suspension stroke without the risk of coil bind during aggressive cycling.

Each spring is manufactured from high-tensile strength wire to ensure the highest linearity and guaranteed consistency in spring rate. To maintain professional-grade standards, Eibach individually tests every spring to verify it meets strict tolerances, providing the predictable response required for shocks and pull-bars. The legendary durability of the ERS line ensures it withstands the rigors of competition while maintaining its height and rate over time.

• Manufacturer Part Number: 1000.250.0200S
• Inside Diameter (ID): 2.50 in.
• Length: 10.00 in.
• Spring Rate: 200 lbs/in
• Construction: High-tensile strength steel for maximum travel
• Testing: Individually tested for rate and linearity
• Design: Maximum travel in combination with smallest block heights

Eibach Race Springs (ERS) provide the precision and customization required for professional racing and demanding off-road applications. This 20-inch length coil-over spring is engineered to maintain high linearity and consistency, ensuring predictable handling dynamics under extreme loads.

Designed with a 3.75-inch inside diameter, these springs are built to achieve maximum travel in combination with the smallest possible block heights to prevent coil bind. Every Eibach spring is individually tested and rated to ensure it meets strict performance tolerances for shocks, pull-bars, and other specialized suspension setups.

• Series: Eibach Race Springs (ERS)
• Inside Diameter: 3.75 in
• Free Length: 20.00 in
• Spring Rate: 300 lbs/in
• Construction: High-durability racing steel
• Tested: Individually tested for linearity and consistency
• MPN: 2000.375.0300S

Fits select 2018-2022 Dodge Durango and Jeep Grand Cherokee (SRT / Trackhawk / Hellcat).

The Eibach Anti-Roll-Kit is designed to significantly reduce body roll and improve cornering stability by increasing the roll stiffness of the vehicle's suspension. This 35mm rear sway bar is a direct replacement for the factory component, engineered to provide flatter handling and more predictable response without compromising ride quality. Cold-formed from high-strength aircraft-grade steel, it is precision-tuned to balance the chassis of heavy, high-performance SUVs like the Durango SRT and Grand Cherokee Trackhawk.

• 35mm diameter rear stabilizer bar for increased roll stiffness
• Cold-formed, high-strength steel construction for long-lasting durability
• Precision-tuned for improved handling and vehicle balance
• Includes all necessary mounting hardware for a complete installation
• Compatible with both OEM and performance aftermarket suspension setups
• Manufactured by Eibach in the USA
• Manufacturer Part Number: E40-51-022-01-01

Fits 2024-2025 Toyota Tacoma.

The Eibach Pro-Truck Rear Shock is engineered to enhance the handling and ride quality of your Toyota Tacoma. Featuring a high-pressure monotube design and a 46mm piston, these shocks provide superior damping consistency and better heat dissipation compared to factory twin-tube units. This upgrade is essential for drivers looking for improved vehicle stability and control when navigating off-road terrain or hauling heavier payloads.

• Monotube design ensures fade-free performance and consistent response
• Zinc-coated shock body for excellent durability and corrosion resistance
• Nitrogen-charged to maintain performance under high-stress driving conditions
• Direct bolt-on replacement for OE shocks using factory mounting points
• Manufacturer Part Number: E60-82-105-02-01

Fits 2016-2024 Chevrolet Camaro (6th Gen) models.

The Eibach Drag Launch Kit is engineered to provide the consistent weight transfer and rear-wheel traction necessary for competitive drag racing. By optimizing the spring rates specifically for the 6th Gen Camaro chassis, this kit helps control body squat and front-end lift during hard launches, ensuring your power gets to the pavement more efficiently.

Whether you are chasing a better personal best at the local strip or building a dedicated bracket car, these precision-wound springs provide the stability and predictable performance required for lower 60-foot times. This kit is designed to work with the factory suspension mounting points for a straightforward installation that replaces worn or less-effective factory components.

• Engineered for optimized weight transfer and maximum rear-wheel traction
• Reduces 60-foot times through improved launch consistency
• Precision-wound springs tailored for the 6th Gen Camaro chassis
• Direct fit for 2016-2024 Chevrolet Camaro models
• Manufacturer Part Number: E32-23-018-01-22

Fits 2022-2025 Nissan Frontier.

The Eibach Stage 2R Pro-Truck Lift Kit provides a precision-engineered suspension solution for owners looking to enhance both off-road capability and on-road stability. This system replaces factory components with performance-tuned shocks and hardware designed to handle increased terrain demands while maintaining a composed ride during daily driving.

Engineered for durability and consistent performance, the Stage 2R series is designed to provide the necessary ground clearance for larger wheel and tire packages and improved approach angles. Every component is manufactured to exacting tolerances to ensure a direct fit using factory mounting points without the need for extensive modification.

• Specifically tuned for the 2022-2025 Nissan Frontier platform
• Enhanced ground clearance and increased suspension travel
• Improved damping characteristics for superior off-road control
• Direct-fit application for straightforward installation
• Manufacturer Part Number: E86-63-045-02-22

Fits 2015-2020 Ford F-150 Super Crew 4WD models.

Eibach Pro-Truck 2.5 Reservoir shocks are engineered to provide the damping control and heat management required for aggressive off-road use. By utilizing a 2.5-inch diameter shock body and an external reservoir, these units offer a significant increase in oil capacity over standard monotube shocks. This extra fluid volume helps dissipate heat more effectively, preventing performance fade and maintaining consistent valving control during sustained travel over rough terrain.

• 2.5-inch diameter shock body for increased fluid capacity and structural strength
• External reservoir design for improved cooling and consistent damping performance
• Vehicle-specific valving optimized for the weight and suspension geometry of the Ford F-150 Super Crew
• Durable finish designed to withstand harsh off-road environments
• Direct replacement for factory rear shocks on 4WD models
• Manufacturer Part Number: E83-35-059-01-02

Fits 2025-2026 RAM 1500.

The Eibach Ride Height Correction Link provides a mechanical solution for adjusting the factory ride height. These links replace the fixed-length factory components to modify the input to the vehicle's leveling sensors, allowing you to fine-tune the stance for a leveled look or improved clearance without major suspension modifications.

• Direct replacement for factory leveling sensor links
• Enables precise ride height adjustment
• Durable construction designed for harsh undercar environments
• Manufacturer Part Number: LK31-27-016-01-20

Fits 2024-2025 Toyota Land Cruiser.

The Eibach Pro-Lift-Kit HD (Heavy Duty) Rear Springs are engineered specifically for Land Cruiser owners who demand consistent ride height and stability under load. Whether you are outfitting your rig with a heavy rear bumper, tire carrier, or hauling gear for extended overland trips, these springs prevent the rear-end sag common with factory coils. By utilizing Eibach's race-winning spring technology, these coils provide additional ground clearance and improved off-road capability without compromising on-road ride quality.

• Specifically designed for heavy-duty applications and constant rear loads
• Provides increased rear ride height for better approach and departure angles
• Precision-wound using high-tensile strength spring steel
• Durable silver powder coat finish for maximum corrosion resistance
• Compatible with factory shocks or upgraded aftermarket dampers
• Manufacturer Part Number: E30-82-108-03-02

Fits 2023-2026 BMW M2, M3, and M4 models (G8X chassis).

The Eibach Anti-Roll Bar Kit (E40-20-057-01-11) is engineered to significantly reduce body roll and increase cornering stiffness on the G8X platform. By increasing the torsional rigidity of the suspension, these bars provide more precise turn-in and improved mid-corner stability. This allows for flatter cornering without the harshness associated with overly stiff springs, maintaining a balanced ride for both street and track use.

Each bar is cold-formed from high-strength, aircraft-grade steel and finished with a durable powder coat for long-lasting protection against the elements. This kit includes both the front and rear bars to provide a complete handling solution for the latest generation M-cars.

• Front Bar Diameter: 29mm
• Rear Bar Diameter: 25mm
• Significantly reduced body roll during high-speed cornering
• Enhanced steering response and chassis balance
• Cold-formed from high-tensile strength steel
• Includes all necessary hardware for installation
• Manufacturer Part Number: E40-20-057-01-11

Fits 2022-2026 Honda CR-V.

The Eibach Pro-Kit is the primary choice for improving both the handling and appearance of your daily-driven vehicle. This set of four lowering springs is engineered to lower the vehicle's center of gravity, which reduces squat during acceleration, minimizes body roll in corners, and limits excessive nose-dive under hard braking. By closing the fender gap, the Pro-Kit provides a more aggressive stance while maintaining the ride quality expected for street use.

Each spring in the E10-40-048-01-22 kit is designed using a progressive spring rate. This ensures that you have the necessary stiffness for performance driving while retaining a compliant, comfortable ride during normal cruising. These springs are developed and tested to work specifically with factory dampers, ensuring a straightforward installation that preserves the vehicle's suspension geometry.

• Performance handling and improved stability
• Lower center of gravity for better control
• Progressive spring design for balanced ride quality
• Engineered to work with OE dampers
• Manufacturer Part Number: E10-40-048-01-22
• Includes: Set of 4 Springs

Fits 2008-2025 Toyota Land Cruiser 78 and 79 Series models (LC78/LC79).

Improve your vehicle's off-road capability and stance with the Eibach Pro Lift Kit. These front coil springs are engineered to provide a 4-inch lift, delivering the additional ground clearance necessary for navigating technical terrain and accommodating larger wheel and tire packages. Designed to replace the factory front springs, these units are tuned to maintain composure and ride quality both on the pavement and across corrugated tracks.

• Provides a 4-inch (100mm) front lift height
• Developed specifically for the Toyota 70 Series Land Cruiser chassis
• Improves approach angles and ground clearance
• Direct replacement for original equipment front coil springs
• Manufacturer Part Number: E30-82-076-02-20

Fits 2024-2026 Lexus GX550.

Eibach Pro-Lift-Kit rear springs are precision-engineered to provide a suspension lift for your Lexus GX550, delivering increased ground clearance and a more commanding stance. Designed for owners who want to improve off-road capability while maintaining the refined on-road ride quality of the GX platform, these springs serve as a high-performance replacement for the factory rear coils.

By optimizing the spring rate for the GX550's chassis, Eibach ensures better handling dynamics and the ability to clear larger wheel and tire combinations. Each spring is manufactured using the same cold-winding technology found in Eibach’s championship-winning race springs, ensuring they resist sagging and maintain their ride height even under heavy cargo loads or off-road stress.

• Specifically tuned for the 2024-2026 Lexus GX550
• Provides rear lift for improved clearance and approach/departure angles
• Compatible with factory shocks and mounting points
• Developed and manufactured by Eibach in the USA
• Manufacturer Part Number: E30-59-009-02-02

Fits select 2017-2026 Ford F-250 and F-350 Super Duty 4WD models.

The Eibach PRO-TRUCK-LIFT Stage 1 system is an engineered suspension solution designed to provide a balanced ride quality and increased off-road capability. This system features a matched set of lift springs and performance shocks that work together to provide maximum ride height and increased wheel travel without compromising the integrity of factory bushings or ball joints. This is a direct-replacement system designed for truck owners who demand optimal performance both on the street and the trail.

Each component is manufactured to OE quality standards using Eibach’s proven off-road race spring technology. To ensure consistent performance and handling, every shock is individually tested for matched damping characteristics at each corner of the vehicle.

• Matched system of lift springs and shocks designed for increased travel and performance
• Manufactured using Eibach off-road race spring technology and OE quality standards
• Shocks individually tested for matched performance in each corner
• Provides balanced ride quality, control, and off-road capability
• Made in the U.S.A.

Fits select 2025-2026 Ram 1500 4WD models including RHO, Rebel, and Laramie (3.0L).

Eibach Pro-Lift-Kit springs provide a suspension lift for your truck without the need for complex coilover systems or compromising spacer lifts. By replacing the factory springs, this kit allows for a full range of suspension travel, avoiding the additional stress on bushings and ball joints common with spacer-based leveling kits. These springs are precision-engineered to improve off-road capability while maintaining the stability and handling required for daily on-road driving.

• Provides front lift to level vehicle stance and increase ground clearance
• Allows for larger wheel and tire combinations with improved fender clearance
• Maintains factory suspension geometry and reduces stress on drivetrain components
• Designed and manufactured in the USA
• Engineered specifically for the 3.0L 4WD Ram 1500 platform

Fits 2019-2024 Ram 1500 Rebel.

Developed for the trail, the Eibach PRO-TRUCK-LIFT Stage 2R system provides high-level damping control and off-road performance. This complete suspension solution combines the height-adjustability of PRO-TRUCK Coilover 2.0s for the front with PRO-TRUCK Reservoir Sport Shocks for the rear. The external reservoirs out back ensure consistent performance by increasing oil capacity, which helps dissipate heat during aggressive driving or over rough terrain.

Each system is engineered using a 46mm monotube piston design with nitrogen-filled variable force valving. The coilovers feature anodized 6061-T6 billet aluminum mounts and heavy-duty bushings that have been cycle-tested for long-term reliability. To ensure consistent quality, every damper is individually dyno-tested to match specified performance targets.

• Stage 2R system includes front coilovers, rear external reservoir shocks, and PRO-LIFT-KIT springs.
• Height-adjustable front coilovers for fine-tuning ride height and ground clearance.
• Monotube design with 46mm pistons and nitrogen-filled variable force valving.
• Anodized 6061-T6 billet aluminum coilover mounts.
• Heavy-duty bushing system cycle-tested for durability.
• Individually dyno-tested for matched performance.
• Engineered and manufactured by Eibach in the U.S.A.

Fits 2021-2024 Ram 1500 TRX.

Eibach Pro-Lift-Kit front springs are engineered to provide 1.6 inches of suspension lift, increasing ground clearance and providing the necessary room for larger wheel and tire packages. Unlike spacer-based lifts that can increase stress on bushings and ball joints, these precision-wound springs allow for a full range of suspension travel without compromising the TRX's specialized factory dampers. Manufactured in the USA, this kit improves off-road capability while maintaining the stability and handling required for daily street use.

• Provides 1.6 inches of front lift height
• Compatible with factory shocks; no spacers or coilovers required
• Increases ground clearance and fender gap for larger tires
• Maintains factory suspension travel and geometry
• Precision-wound for durability and consistent performance
• Made in the USA

Fits select 2025-2026 Ram 1500 4WD models including RHO, Rebel, Laramie, and Tradesman (3.0L).

Eibach Pro-Lift-Kit springs provide a functional suspension lift for your vehicle without the need for complex coilover systems or budget-style spacer lifts. Unlike spacer kits that can limit travel and increase stress on factory bushings and ball joints, these springs are designed to operate within the full range of your suspension's geometry. This results in a lifted stance that maintains excellent on-road stability and improves off-road capability.

• Precision engineered for increased ground clearance and improved handling
• Provides additional fender clearance for larger wheel and tire combinations
• Designed to work with factory shocks or Eibach Pro-Truck shocks
• Manufactured in the U.S.A. using high-tensile spring steel
• Reduces the excessive dive and roll associated with stock suspension
• Manufacturer Part Number: E30-27-016-02-20

Fits 2015-2020 Chevrolet Tahoe 4WD (LS, LT, LTZ, PPV, Premier, and SSV).

The Eibach PRO-TRUCK-LIFT Stage 1 system is a precision-engineered suspension solution designed to provide increased ride height while maintaining the durability of your vehicle’s factory drivetrain components. This matched system of lift springs and shocks is developed using the same off-road race spring technology found in Eibach’s championship-winning vehicles, ensuring balanced ride quality and enhanced capability on technical terrain.

• Includes a matched set of lift springs and performance shocks (MPN: E80-23-030-01-22).
• Engineered for increased suspension travel and off-road control.
• Shocks are individually tested for matched performance in every corner.
• Designed to protect the integrity of factory bushings and ball joints.
• Manufactured by Eibach in the U.S.A. to OE quality standards.

Fits 2014-2020 Chevrolet Silverado 1500 and GMC Sierra 1500.

The Eibach PRO-TRUCK-LIFT Stage 1 system is an advanced suspension solution engineered for drivers seeking optimal performance both on and off-road. This matched system of lift springs and shocks delivers increased wheel travel and maximum ride height without compromising the integrity of factory bushings, ball joints, or other OE suspension components.

Utilizing the same spring technology found in Eibach's off-road racing components, this kit provides a balanced ride quality with improved control in demanding terrain. Every shock is individually dyno-tested to ensure matched performance at each corner of the vehicle, providing a reliable and predictable handling profile for both daily driving and trail use.

• Precision-matched lift springs and shocks designed for increased travel
• Manufactured using Eibach race-winning spring technology and OE quality standards
• Individually tested shocks for matched performance at every corner
• Provides balanced ride quality, enhanced control, and off-road capability
• Made In U.S.A.
• Manufacturer Part Number: E80-23-006-02-22

Vehicle Fitment

Fits 2014-2018 Chevrolet Silverado 1500 and GMC Sierra 1500 (2WD/4WD) models.

The Eibach PRO-TRUCK-LIFT STAGE 2 system (MPN: E86-23-032-01-22) is an engineered suspension solution for truck owners demanding increased off-road capability without sacrificing on-road stability. This system upgrades the front suspension to 2.0 coilovers utilizing an extended-travel monotube design. These coilovers feature variable force valving to provide precise control on the street and maximum traction on technical trails.

Equipped with ERO Off-Road Race Springs, the front coilovers include an adjustable threaded spring perch to allow for precise ride-height tuning, making it easy to accommodate heavier front-end loads or clear larger tire setups. Every component is built for durability, featuring 6061-T6 billet aluminum mounts and a heavy-duty bushing system that has been cycle-tested for long-term reliability. To ensure consistent performance, each coilover is individually dyno-tested and matched.

• Includes Pro-Truck Coilover 2.0 front assemblies and matched Rear Sport Shocks.
• 46mm piston monotube design with nitrogen-filled variable force valving.
• Anodized 6061-T6 billet aluminum coilover mounts for superior strength.
• Adjustable threaded spring perch for ride height customization.
• Individually dyno-tested for matched performance and reliability.
• Designed, tested, and manufactured by Eibach in the U.S.A.

Authoritative Fitment:

• 2014-2018 Chevrolet Silverado 1500 (WT, High Country, LS, LT, LTZ, SSV, Custom)
• 2014-2018 GMC Sierra 1500 (Base, Denali, SLE, SLT)

Fits 2019-2023 Ford Ranger Lariat, XL, and XLT 4WD models (2.3L).

This Eibach front spring is engineered to provide consistent suspension performance and long-term durability. Developed and manufactured in the USA and Germany, these springs are built to IATF 16949 guidelines, ensuring they meet the high standards expected by OEMs. To combat environmental wear and ensure longevity, each spring undergoes a zinc phosphating pre-treatment process to prevent corrosion infiltration and surface degradation.

• Manufactured in the USA and Germany following IATF 16949 quality standards
• Zinc phosphating pre-treatment for superior corrosion resistance and durability
• Extensive static and dynamic testing to ensure structural integrity
• Direct fitment for select Ford Ranger 4WD suspension systems
• Manufacturer Part Number: R40006

Vehicle Fitment