Fits 2014-2022 Jeep Cherokee KL (2wd & 4wd) including Latitude, Limited, and Trailhawk models.

The Tuff Country EZ-Ride Suspension 2-inch lift kit is a straightforward solution to increase the ride height of your Jeep Cherokee KL. This kit provides the necessary clearance to install larger tires and gives the vehicle a more aggressive off-road stance while maintaining factory ride quality. Designed as a bolt-on application, it uses precision-engineered spacers to achieve lift without requiring a full suspension replacement or compromising your vehicle’s handling.

• Lifts vehicle 2 inches for increased ground clearance and a leveled stance
• Accommodates larger aftermarket tire sizes
• Includes front strut spacers and rear coil spring spacers
• Maintains factory ride comfort and suspension geometry
• Compatible with both 2wd and 4wd KL chassis models
• Manufacturer Part Number: 42103

Vehicle Fitment

Fits select 2010-2013 Dodge and Ram 2500/3500 4WD models (Lift Kits Only).

Restore steering precision and suspension stability with this Tuff Country polyurethane bushing kit. Engineered specifically for heavy-duty Dodge and Ram trucks equipped with aftermarket lift kits, these components replace soft or worn-out factory rubber bushings to eliminate axle shift and deflection. High-density polyurethane provides a firmer pivot point than OE rubber, maintaining proper suspension geometry even under the increased stress of oversized tires and lift heights.

This comprehensive kit provides a complete service for the front suspension, including both upper and lower control arm bushings along with the required replacement sleeves. The durable polyurethane material is resistant to road salts, oils, and environmental breakdown, ensuring a longer service life in harsh conditions.

• Location: Front Upper and Lower Control Arms
• Material: High-density Polyurethane
• Application: Designed for use with Tuff Country lift kits
• Includes: Polyurethane bushings and metal inner sleeves
• Manufacturer Part Number: 91314

Fits 2000-2006 Toyota Tundra 4x4 (Base, Limited, and SR5 models).

The Tuff Country 55913 Front Differential Drop Kit is engineered to correct CV axle angles on lifted or leveled four-wheel-drive applications. When the front suspension is raised, the increased angle on the front CV axles can cause binding, excessive vibration, and accelerated wear on the CV boots. This kit utilizes precision spacers to lower the front differential, effectively restoring the drivetrain geometry closer to factory specifications.

• Reduces or eliminates binding on front CV axles caused by suspension lifts
• Corrects axle operating angles to prevent premature CV boot failure
• Essential for maintaining drivetrain longevity on 4WD models
• Includes necessary mounting hardware for a straightforward bolt-on installation
• Manufacturer Part Number: 55913

Fits select 2005-2024 Ford F-250 and F-350 Super Duty trucks equipped with two-piece rear driveshafts.

When lifting a Ford Super Duty, the factory driveline geometry is often altered, leading to unwanted vibrations or "shudder" during acceleration. The Tuff Country EZ-Ride carrier bearing drop kit (MPN 20933) is designed to correct these driveline angles by lowering the carrier bearing mounting point. This simple but effective modification helps realign the driveshaft to eliminate vibration and prevent premature wear on universal joints.

• Realigns two-piece driveshafts on lifted applications
• Helps eliminate takeoff shudder and driveline vibration
• Engineered for precise fitment with factory mounting points
• Manufacturer Part Number: 20933

Fits select 2011-2024 Chevrolet Silverado 2500 HD/3500 HD and 2019-2024 GMC Sierra 2500 HD/3500 HD (2WD/4WD).

The Tuff Country 10905 Front Shock Extension Kit provides a reliable way to retain your factory-length shocks when installing a leveling kit or a small suspension lift. By relocating the upper shock mounting point, these brackets ensure the shocks operate within their intended travel range, maintaining factory ride quality without the immediate need for expensive extended aftermarket shocks.

• Maintains factory ride quality by keeping OE shocks within functional travel specs
• Durable shock relocation brackets designed for precise vehicle fitment
• Cost-effective solution for lifted or leveled 2WD and 4WD configurations
• Compatible with Chevrolet Silverado and GMC Sierra 2500 HD and 3500 HD models
• Manufacturer Part Number: 10905

This hardware kit includes the necessary relocation brackets to correct shock geometry after suspension height adjustments, preventing over-extension and potential damage to the shock internals.

Fits select 2003-2024 Toyota 4Runner, 2005-2024 Toyota Tacoma, and 2007-2014 Toyota FJ Cruiser.

Tuff Country EZ-Ride Suspension upper control arms are engineered to correct suspension geometry on lifted Toyota trucks and SUVs. Specifically designed for vehicles equipped with 2 to 4 inches of suspension lift, these arms help restore proper alignment specifications that are often difficult to achieve with factory components. By replacing the stock units, these control arms provide additional suspension travel and improved durability for off-road use.

• Designed for vehicles with 2-inch to 4-inch suspension lift kits
• Restores proper suspension geometry and alignment specs
• Provides additional suspension travel for improved articulation
• Designed for use with factory steering knuckles
• Direct replacement for worn or geometry-limited OE upper arms
• Manufacturer Part Number: 50935

Fits 1987-2001 Jeep Cherokee models (Base, Briarwood, Chief, Classic, Country, Laredo, Limited, Pioneer, SE, and Sport).

Tuff Country rear axle u-bolts are engineered specifically for vehicles equipped with suspension lift kits. These 2.75-inch wide u-bolts provide the critical clamping force required to secure the leaf spring pack to the rear axle housing, maintaining suspension alignment and stability. They serve as a direct replacement for worn or stretched factory hardware when installing a lift.

To ensure long-term durability in harsh environments, these u-bolts feature a zinc-plated finish for maximum corrosion resistance. This kit is a complete solution for one vehicle, providing all necessary hardware for a secure installation.

• Designed for 1987-2001 Jeep Cherokee (XJ) rear axle applications
• Includes four (4) u-bolts, nuts, and washers
• Zinc-plated finish protects against rust and corrosion
• Inside Width: 2.75 inches
• Manufacturer Part Number: 47861

Fits select 1973-1987 Chevrolet and GMC K20, K25, K2500, and V2500 pickups and Suburbans (3/4 Ton 4WD models).

Elevate your truck's stance and ground clearance with the Tuff Country 3-inch suspension lift kit components. Engineered for the 1973-1987 square-body GM platform, this kit is designed to provide additional tire clearance while maintaining the factory ride quality you expect. The system utilizes rear blocks to achieve a level lift, ensuring your 3/4-ton pickup or Suburban retains its off-road durability and on-road manners without the need for an overly stiff suspension setup.

• Provides 3 inches of suspension lift for increased tire clearance
• Maintains factory-style ride quality and handling
• Includes rear lift blocks and required mounting hardware
• Heavy-duty construction designed for safe and effective installation
• Engineered for 4WD 3/4-ton Chevrolet and GMC applications
• Backed by a Limited Lifetime Warranty

• Manufacturer Part Number: 13720
• Lift Height: 3 Inches
• Inclusion: Rear Blocks and Hardware
• Fitment: 4WD 3/4-ton Pickups and Suburbans

Fits select 1967-2019 Chevrolet, GMC, Ford, and Dodge trucks and SUVs, including Silverado/Sierra 1500-3500 HD, K10-K3500, Bronco, and Ramcharger (Fits 1980-1996 Ford Bronco with 5-inch rear lift).

The Tuff Country EZ-Ride SX6000 series is a cellular gas-charged shock absorber engineered to provide a smooth, controlled ride for mid-size and full-size trucks, Jeeps, and SUVs. Unlike standard hydraulic shocks, the cellular gas charge prevents oil foaming and aeration, ensuring consistent damping performance during off-road use or heavy-duty applications. Each shock features multi-stage valving to react to varying terrain and twin-tube construction for increased durability against trail debris.

• Twin-tube construction for enhanced external protection and internal reliability
• Cellular gas-charged design minimizes fluid aeration for consistent damping
• Multi-stage valving provides precise control for both on-road and off-road driving
• Polyurethane bushings included for superior longevity compared to rubber alternatives
• Limited lifetime warranty through the manufacturer
• Shock boots sold separately
• Manufacturer Part Number: 62301

Fits select 1980-1996 Ford F-150, Bronco, and Bronco II 4WD models equipped with suspension lift springs or add-a-leafs.

These Tuff Country rear axle U-bolts are engineered specifically for vehicles with suspension lift kits. When adding lift springs or add-a-leafs, factory hardware is often too short to safely secure the leaf pack to the axle. These extended U-bolts provide the required length and clamping force to maintain suspension integrity and safety during off-road or heavy-duty use.

• Specifically sized for lifted 4WD Ford truck and SUV applications
• Zinc-plated finish provides excellent corrosion resistance
• Designed for use with aftermarket lift springs or add-a-leaf setups
• Complete kit includes (4) U-bolts, (8) nuts, and (8) washers
• Manufacturer Part Number: 27852

Fits select 1980-1996 Ford F-150, Bronco, and Bronco II 4WD models.

Restore suspension caster and maintain proper front-end geometry on your lifted Ford with Tuff Country 2-inch drop radius arm brackets. These brackets are designed to lower the rear mounting point of the factory radius arms, which helps correct the axle sweep and alignment angles that change when a lift is installed. By repositioning the arms, you regain factory-like handling and prevent wandering on the road.

• Manufacturer Part Number: 20872
• Drop Distance: 2 Inches
• Components: Driver and passenger side brackets (Pair)
• Application: Specifically for 4WD configurations
• Function: Corrects caster and suspension geometry
• Fitment: Fits 1980-1996 Ford F-150, Bronco, and Bronco II

Fits select 1973-1991 Chevrolet and GMC 3/4-ton 4WD pickups and SUVs, including K20, K25, K2500, V20, V2500, and Suburban models.

This Tuff Country rear lift block and U-bolt kit provides a dependable and economical solution for leveling your vehicle or increasing rear-end clearance. By installing these cast iron blocks between the factory axle and leaf spring pack, you achieve a consistent 2-inch lift. This kit is engineered specifically for the rear axle of heavy-duty 4WD applications, maintaining suspension geometry while accommodating larger tire setups or correcting rear-end sag.

The kit features durable cast iron construction for the lift blocks and includes a full set of extended U-bolts. These U-bolts are zinc-plated to resist corrosion and are custom-fit for the specified applications to ensure a secure, high-torque installation.

• Provides 2 inches of rear lift height
• High-strength cast iron lift blocks
• Zinc-plated extended U-bolts for corrosion resistance
• Designed for rear axle installation only
• Replaces or stacks with factory components (depending on application)
• Manufacturer Part Number: 97008

Fits select 2009-2024 Dodge and Ram 1500 4x4 models.

Maintain the articulation and durability of your suspension with this Tuff Country EZ-Ride replacement uni-ball joint. Engineered specifically for use with Tuff Country upper control arms, this component is the direct service part for their Uni-Ball lift kits. Over time, off-road use and debris can wear down suspension joints; this replacement ensures your lift kit continues to provide smooth movement and proper alignment.

• Direct replacement for Tuff Country Uni-Ball series lift kits
• Includes one high-strength replacement uni-ball and one snap ring
• Designed for use with Tuff Country upper control arms
• Sold individually
• Manufacturer Part Number: 91127

Fits 1980-1997 Ford F-250 and F-350 4WD trucks across all trims including HD, XL, XLT, and Lariat models.

Tuff Country 82350 add-a-leafs are a cost-effective suspension upgrade designed to increase the rear ride height and load-carrying capacity of your Ford truck. These leaves integrate directly into your vehicle's existing factory leaf spring packs, providing approximately 3 inches of lift while reinforcing the spring rate. This is an ideal solution for compensating for rear-end sag or for trucks equipped with heavy accessories such as winches, utility beds, or snowplows.

• Provides approximately 3 inches of additional rear lift height
• Increases rear payload capacity and restores spring arch
• Bolts directly to existing factory leaf spring stacks
• Durable steel construction designed for heavy-duty use
• Includes necessary center pins for a complete installation
• Sold as a pair (left and right)
• Manufacturer Part Number: 82350

Fits select 1980-2022 Ford Bronco, F-150, F-250, F-250 HD, and F-350 models equipped with 3-inch wide leaf springs.

Tuff Country Add-a-Leafs (MPN 82250) provide a cost-effective solution for adding approximately 2 inches of rear lift to your vehicle. These leaves are designed to integrate with your existing factory leaf spring packs, offering a modest height increase and improved payload capacity. They are an ideal choice for vehicles frequently carrying heavy loads or equipped with front-end accessories like winches or snowplows that cause rear-end sagging.

• Provides approximately 2 inches of additional rear lift height
• Increases rear payload capacity for heavy-duty applications
• Compatible with factory 3-inch wide leaf spring assemblies
• Includes necessary center pins for a complete installation
• Economical alternative to full replacement leaf spring packs
• Manufacturer Part Number: 82250

Fits select 1973-1987 Chevrolet and GMC 1/2 Ton 4WD models including Blazer, Jimmy, K10, K15, K1500, and Suburban.

Improve the dampening and suspension control of your classic GM 4WD with the Tuff Country Rear Dual Shock Kit. This kit is engineered to add secondary shock mounting positions, allowing for the installation of twin shock absorbers at the rear axle. By doubling the number of shocks, the suspension workload is distributed more effectively, which is essential for lifted trucks and SUVs running heavy, oversized tire and wheel packages.

• Precision-engineered for a simple, bolt-on installation to the vehicle's frame
• Increases dampening capacity for better stability and control on lifted applications
• Helps reduce shock fade and heat buildup by distributing force across two shocks per side
• Designed specifically for 1973-1987 GM 4WD 1/2 Ton platforms
• Manufacturer Part Number: 75171
• Note: Shock absorbers are sold separately

Shield your suspension components from the elements with this pair of Tuff Country Red Shock Boots (MPN: 69128). These universal-fit boots are engineered to protect shock absorber piston rods and seals from abrasive dirt, mud, road salt, and debris that can lead to premature seal failure and shaft pitting.

Designed for both daily driving and off-road use, these boots provide a durable barrier while adding a custom look to your vehicle's undercarriage. Each set includes the necessary hardware for a secure, slip-free installation on most standard shock bodies.

• Protects shock piston rods and seals from contaminants
• Universal design fits most standard aftermarket shocks
• Vibrant red finish for a customized appearance
• Includes heavy-duty shock ties for easy installation
• Sold as a pair
• Manufacturer Part Number: 69128

Fits select 1967-1993 Chevrolet, GMC, Dodge, and Jeep trucks and SUVs with 2-2.5 inches of front suspension lift. This includes Blazer, Jimmy, Ramcharger, CJ5, CJ7, and K-Series pickups.

The Tuff Country EZ-Ride SX6000 cellular gas shock absorber is engineered to provide a smooth, controlled ride for mid-size and mini truck or Jeep applications. Designed specifically for vehicles with 2 to 2.5 inches of suspension lift, these shocks utilize cellular gas charging to prevent aeration and foaming, ensuring consistent damping performance during on-road commuting or light off-road use. The twin-tube construction and multi-stage valving allow the shock to react quickly to terrain changes while maintaining stability.

• Twin-tube construction for increased durability and heat dissipation
• Cellular gas charged to reduce oil foaming and fade
• Multi-stage valving provides precise control across various speeds
• Includes durable polyurethane bushings for long-lasting performance
• Limited Lifetime Warranty
• Manufacturer Part Number: 62201
• Note: Shock boots are sold separately

Fits select 1986-2003 Dodge Dakota and Durango, Ford F-150, and Toyota 4Runner and Pickup models. This Tuff Country SX6000 series front shock (62182) is specifically valved for lifted mini and mid-size applications, including the 1997-1999 Dodge Dakota 4x4 equipped with a 5.5-inch suspension lift.

Built with twin-tube construction, the SX6000 utilizes cellular gas charging to reduce oil foaming and provide a smooth, controlled ride across both highway and trail conditions. The multi-stage valving reacts to terrain changes instantly, while the included polyurethane bushings offer superior durability compared to standard rubber. This shock is an ideal solution for restoring damping performance on lifted trucks and SUVs.

• Manufacturer Part Number: 62182
• Series: SX6000 Cellular Gas
• Design: Twin-tube construction
• Valving: Multi-stage valving for controlled ride quality
• Bushings: Durable polyurethane bushings included
• Fitment: Front location on select 1986-2003 4WD and 2WD models
• Note: Shock boots are sold separately
• Warranty: Limited Lifetime Warranty

Fits select 1988-2020 Jeep Wrangler, Dodge/Ram 1500/2500/3500, Ford F-150/F-250/F-350, and Toyota Tacoma/Tundra.

The Tuff Country EZ-Ride SX8000 Nitro Gas shock absorber is engineered for full-size trucks and SUVs, specifically designed to handle the demands of lifted applications. By utilizing high-pressure nitrogen gas, the SX8000 series significantly reduces oil foaming and shock fade during heavy use, ensuring consistent damping and a quicker response time compared to standard hydraulic units.

Built with a durable twin-tube construction and a robust 5/8-inch piston rod, these shocks provide the stability needed for both highway towing and off-road excursions. The included polyurethane bushings offer superior longevity and vibration dampening over factory rubber components, maintaining suspension alignment under load.

• Nitro Gas Charged: Minimizes internal oil aeration to prevent shock fading.
• Twin-Tube Construction: Rugged design protects internal components from trail debris.
• Heavy-Duty Hardware: Features a 5/8 in. piston rod for increased structural strength.
• Polyurethane Bushings: High-performance bushings included for reduced deflection.
• Fitment Note: Ideal for vehicles with 0-3 inches of rear lift.
• Manufacturer Part Number: 61302
• Warranty: Limited Lifetime Warranty.

Note: Shock boots are sold separately. This part is sold individually (single shock).

The Tuff Country EZ-Ride SX8000 Nitro Gas shock absorber is engineered for full-size applications where performance and durability are critical. Utilizing a twin-tube construction and nitrogen gas charging, these shocks are designed to minimize aeration and reduce shock fade during demanding driving conditions. The result is a quicker shock response and more consistent dampening whether you are on the highway or navigating off-road terrain.

Built to withstand the stresses of lifted suspensions, the SX8000 features a heavy-duty 5/8-inch piston rod and resilient polyurethane bushings for long-lasting service life. These shocks are sold individually and are an ideal upgrade for vehicles equipped with suspension lift kits.

• Manufacturer Part Number: 61262
• Construction: Twin-tube nitro gas charged
• Piston Rod: 5/8-inch diameter for increased strength
• Bushings: Durable polyurethane for improved feel and longevity
• Performance: Reduces shock fade and improves response time
• Warranty: Limited lifetime manufacturer warranty

Note: Shock boots are sold separately.