Fits 1999-2004 Ford Mustang Cobra and Mach 1 (4.6L).

Replace restrictive factory exhaust manifolds with JBA Shorty Headers to unlock horsepower and torque across the RPM range. These headers are engineered with 1-5/8 inch mandrel-bent stainless steel primary tubes to ensure smooth exhaust gas scavenging and long-term durability. The silver ceramic coating provides a premium finish while serving as a functional thermal barrier, significantly reducing under-hood temperatures and protecting the header material from corrosion and heat cycle fatigue.

• 1-5/8 inch primary tubes for optimized exhaust flow
• Mandrel-bent stainless steel construction resists warping and cracking
• Silver ceramic thermal coating reduces engine bay heat
• Heavy-duty flanges prevent leaks at the cylinder head
• Direct bolt-on installation using factory mounting locations
• Includes high-quality gaskets and installation hardware

Fits select 1988-1995 Chevrolet and GMC Blazer, C/K 1500/2500/3500, Suburban, Sierra, and Yukon models (5.7L).

JBA mid-pipes are engineered to replace restrictive factory components, opening up exhaust flow to improve performance and enhance engine sound. These pipes are constructed from 409 series stainless steel and feature mandrel-bent tubing to maintain a consistent diameter, effectively reducing backpressure. Each unit is finished with a hand-polished mirror shine for a clean, custom appearance under the chassis.

Designed for a professional fit, these mid-pipes include heavy-duty flanges, factory-style hangers, and O2 sensor provisions where required for a secure, leak-free installation. This kit includes high-quality hardware and instructions to simplify the bolt-on process.

• Manufacturer Part Number: 2831SY
• Material: 409 Series Stainless Steel
• Tubing: Mandrel-bent for optimized flow
• Installation: Factory-style hangers and heavy-duty flanges
• Sensor Provisions: O2 sensor bungs included where required

Legal Disclaimer: This product is not legal on catalytic converter equipped vehicles for street or off-highway use in California or in states that have adopted California emissions regulations and is only intended for closed course competition.

Fits 1964-1973 Ford Mustang models including Base, Boss 302/351, Mach 1, and Shelby GT-350/GT-500 equipped with 260-302 Small Block Ford engines and 4-speed manual, C4, C6, or AOD automatic transmissions.

JBA long tube headers (MPN 6610S) are engineered for enthusiasts seeking maximum high-RPM efficiency and significant horsepower gains. These headers are constructed from 1-3/4 inch mandrel-bent 409 series stainless steel to ensure unrestricted flow and durability. The design features JBA’s patented Firecone® merged collectors, which utilize a race-proven design to smooth exhaust pulses and improve scavenging. To prevent leaks and warping, the 3/8-inch thick one-piece flanges are CNC laser-cut for a precision fit against the cylinder head. The system is also tucked to provide optimal ground clearance for lowered vehicles.

• Construction: Large diameter 1-3/4" mandrel-bent 409 stainless steel tubing
• Collector Design: Patented JBA Firecone® merged collector for superior scavenging
• Flanges: 3/8" thick CNC laser-cut one-piece design to prevent exhaust leaks
• Port Type: Oversized exhaust ports to accommodate modified cylinder heads
• Sensor Support: Integrated O2 sensor provisions
• Finish: Raw stainless steel
• Manufacturer Part Number: 6610S

Fits select 2004-2021 Nissan Titan models (5.6L).

Upgrade your vehicle's exhaust flow and tone with the JBA 40-1403 Cat-Back Exhaust System. This system replaces the restrictive factory exhaust with large-diameter, mandrel-bent 409 stainless steel tubing to reduce backpressure and improve efficiency. Engineered for the 5.6L V8, the high-flow stainless steel muffler is tuned to deliver an aggressive performance note without becoming overwhelming in the cabin.

• Manufactured from durable 409 stainless steel
• Mandrel-bent tubing ensures consistent diameter for maximum flow
• Passenger side dual exit configuration
• Polished stainless steel chrome tips for a finished look
• High-flow performance stainless steel muffler
• Utilizes factory-style hangers for a secure fit
• Includes all necessary high-quality installation hardware
• Manufacturer Part Number: 40-1403

Fits select 2009-2022 Dodge and Ram 1500, 1500 Classic, and 2500 models (5.7L HEMI).

JBA Cat4Ward shorty headers are a premier performance upgrade designed to replace restrictive factory exhaust manifolds. By utilizing mandrel-bent stainless steel tubing and the proprietary JBA Firecone collector, these headers significantly reduce backpressure, allowing your engine to breathe more efficiently for increased horsepower and torque. The silver coating provides a clean, durable finish that can withstand the rigors of heavy towing, racing, and daily driving.

Built for a professional, leak-free installation, these headers feature heavy-duty 3/8-inch machined flanges and oversized exhaust ports to prevent warping and ensure a perfect seal. Each kit includes factory-style emission connections and high-quality hardware to maintain vehicle compliance and simplify the installation process.

• Manufacturer Part Number: 1961S-2JS
• 1-5/8 inch mandrel-bent stainless steel primary tubes
• Proprietary JBA Firecone race-proven collector design
• 3/8-inch thick machined flanges with oversized exhaust ports
• Extra thick collector domes for long-term durability
• Integrated factory-style emission connections
• Durable silver coated finish

Fits select 1996-2003 Dodge Dakota, Durango, and Ram 1500/2500/3500 (5.2L / 5.9L).

JBA Cat4Ward shorty headers are engineered to replace restrictive factory cast iron manifolds with high-flow, mandrel-bent 409 stainless steel. These headers improve engine efficiency by reducing backpressure, resulting in increased horsepower and torque across the powerband. The 1945S-1 features JBA’s proprietary Firecone collector, a race-proven design that optimizes exhaust scavenging for better throttle response and performance while towing or daily driving.

• Heavy-duty 3/8-inch machined flanges with oversized exhaust ports to prevent warping
• 1-1/2 inch mandrel-bent 409 stainless steel primary tubing for consistent flow
• Proprietary JBA Firecone collector design for maximum scavenging
• Factory-style emission connections for simplified installation
• Extra-thick collector domes designed for high-heat durability
• Includes high-quality installation hardware and necessary gaskets

Built to endure the rigors of heavy-duty use, these raw stainless steel headers provide a professional-grade upgrade for Magnum-powered Dodge trucks. Manufacturer Part Number: 1945S-1.

Fits 2010-2018 Chevrolet Camaro SS and ZL1 (6.2L).

JBA PowerCables™ ignition wires are engineered to maximize spark energy by providing less than half the electrical resistance of standard factory wires. These heavy-duty wires are built for severe-duty environments, featuring wire-wound mag conductors that provide superior Electromagnetic Interference (EMI) suppression to protect your vehicle's sensitive electronics.

Each set is custom-tailored to specific lengths for the 6.2L engine and includes cylinder I.D. labels to ensure a straightforward installation. The 100% silicone jackets and unique boot ends are designed for maximum clearance and long-term durability against extreme under-hood temperatures and abrasion.

• Ultra-low resistance design delivers more energy to the spark plugs
• Wire-wound mag conductors for excellent EMI suppression
• 100% silicone jackets and boots for superior heat and abrasion resistance
• Extra-thick diameter for enhanced durability and a performance appearance
• Numbered cylinder I.D. labels for easy identification during installation
• Color: Red
• Manufacturer Part Number: W0812

Fits 1967-1970 Ford Mustang models (Base, Boss 302, Grande, Mach 1, and Shelby GT-350/GT-500/GT-500KR) equipped with 390-428 FE big block engines.

JBA Silver Ceramic Coated Tri-Y long tube headers are engineered to optimize exhaust scavenging and high-RPM efficiency for the classic FE big block. The Tri-Y design is specifically chosen to provide a broad increase in torque and horsepower across the entire powerband compared to standard four-into-one designs. These headers are constructed with large-diameter mandrel-bent steel tubing to eliminate restrictions and feature a silver ceramic coating that provides a durable, heat-resistant finish while lowering engine bay temperatures.

Installation is simplified with 3/8-inch thick CNC laser-cut flanges that resist warping and ensure a leak-free seal against the cylinder head. The integrated JBA Firecone® merged collectors facilitate smooth exhaust flow, while the design maintains maximum ground clearance for lowered vehicles. Each set includes O2 sensor provisions for modern tuning requirements.

• Part Number: 6655SJS
• Primary Tube Diameter: 1-3/4 inch
• Collector Diameter: 2-1/2 inch
• Finish: Silver Ceramic Coating
• Flange Thickness: 3/8 inch CNC laser-cut
• Construction: Mandrel-bent steel with oversized exhaust ports
• Features: Patented JBA Firecone® merged collector

Fits select 1964-1973 Ford Mustang models with a 351W Small Block Ford (SBF) engine.

JBA long tube headers are engineered for drivers seeking maximum horsepower and torque gains across the entire RPM range. These headers feature large 1-3/4 inch mandrel-bent stainless steel primary tubes protected by a silver ceramic coating that reduces under-hood temperatures while preventing corrosion. The design includes JBA’s patented Firecone® merged collectors for smooth exhaust scavenging and peak high-RPM efficiency. Built for durability, each set utilizes 3/8-inch thick CNC laser-cut one-piece flanges and oversized exhaust ports to ensure a leak-free seal and optimal flow.

• 1-3/4 inch mandrel-bent primaries for optimized exhaust velocity
• Silver ceramic coating for heat management and corrosion resistance
• Patented JBA Firecone® merged collectors for superior scavenging
• Heavy-duty 3/8-inch CNC laser-cut flanges prevent warping
• Oversized exhaust ports and O2 sensor provisions included
• Low-profile design engineered for maximum ground clearance on lowered vehicles
• Manufacturer Part Number: 6616SJS

Fits 1964-1973 Ford Mustang models equipped with a 351W Small Block Ford engine.

JBA long tube headers are engineered for significant performance gains and high-RPM efficiency. Constructed from raw 409 series stainless steel, these headers utilize a long-tube design that is proven to increase horsepower and torque across the entire powerband. Each header features large-diameter mandrel-bent tubing to maintain consistent exhaust velocity and proprietary JBA Firecone® merged collectors for superior scavenging and smooth flow.

Designed with performance and durability in mind, these headers provide maximum ground clearance to prevent dragging on lowered vehicles. The 3/8-inch thick one-piece flanges ensure a leak-free seal at the cylinder head, while oversized exhaust ports accommodate modified cylinder heads. This system includes integrated O2 sensor provisions for straightforward installation.

• Part Number: 6616S
• Primary Tube Diameter: 1-3/4 in
• Material: Raw 409 Stainless Steel
• Flange Thickness: 3/8 in CNC laser-cut one-piece
• Collectors: Patented JBA Firecone® merged design
• Mandrel-bent tubing for optimized exhaust flow
• Oversized exhaust ports and O2 sensor provisions included

Fits 1964-1970 Ford Mustang Base, Boss 302, Grande, Mach 1, and Shelby (GT-350, GT-350H, GT-500, GT-500KR) models equipped with 260-428 CID engines.

Achieve the iconic side-exit look and sound with the JBA Eleanor Style Dual Side Header-Back Exhaust system. Designed to replace restrictive factory exhaust components, this system uses 409 stainless steel mandrel-bent tubing to ensure consistent diameter throughout every curve, maximizing exhaust gas velocity and reducing backpressure. The system is centered around high-flow stainless steel mufflers tuned to provide a deep, aggressive performance tone without excessive interior resonance.

This header-back kit includes polished stainless steel tips for a finished aesthetic and utilizes factory-style hangers for a secure installation. Whether you are finishing a restomod project or upgrading a classic driver, JBA Part Number 50-2651 provides the durability of stainless steel with the signature performance profile expected of the Mustang platform.

• System Type: Header-Back
• Material: 409 Stainless Steel construction
• Tubing: Large diameter mandrel-bent tubing
• Mufflers: High-flow stainless steel performance mufflers
• Tips: Polished stainless steel chrome finish
• Hardware: High-quality mounting hardware and factory-style hangers included
• Manufacturer Part Number: 50-2651

Fits 1996-2002 Toyota 4Runner Base, Limited, and SR5 models equipped with the 3.4L engine.

Replace your restrictive factory piping with the JBA 409SS Single Exit Cat-Back Exhaust System. This system is engineered to optimize exhaust scavaging and reduce backpressure by utilizing large-diameter, mandrel-bent 409 stainless steel tubing. The included high-flow performance muffler is specifically tuned to deliver an authoritative exhaust note under acceleration while maintaining a comfortable cabin environment for daily driving.

• Manufactured from durable 409 stainless steel for long-term corrosion resistance
• Mandrel-bent tubing ensures consistent diameter through bends for maximum flow
• High-flow stainless steel muffler improves engine efficiency and sound profile
• Single passenger-side exit with a polished chrome stainless steel tip
• Features factory-style hangers and high-quality hardware for a straightforward installation
• Manufacturer Part Number: 40-9010

Fits 2006-2009 Chevrolet Trailblazer SS (6.0L).

The JBA 40-3048 Cat-Back Exhaust System is engineered to unlock the performance potential of the 6.0L LS2-powered Trailblazer SS. By replacing the restrictive factory exhaust with large-diameter, mandrel-bent 409 stainless steel tubing, this system significantly reduces backpressure to improve horsepower, torque, and throttle response. JBA tunes each system to provide a deep, aggressive exhaust note that enhances the vehicle's character without becoming overwhelming inside the cabin.

Built for durability and precise fitment, this single rear exit system utilizes factory-style hangers and includes high-quality hardware for a reliable bolt-on installation. The 409 stainless steel construction provides excellent resistance to corrosion, while the polished chrome tip offers a clean, performance-oriented finish.

• Mandrel-bent 409 stainless steel tubing for maximum exhaust flow
• High-flow stainless steel muffler provides a tuned performance tone
• Large-diameter piping improves engine efficiency and power output
• Direct bolt-on installation using factory-style hangers
• Includes polished stainless steel chrome tip and high-quality hardware
• Manufacturer Part Number: 40-3048

Fits 2003-2006 Hummer H2 Base (6.0L).

The JBA Single Rear Exit Cat-Back Exhaust system is engineered to replace the restrictive factory piping on your Hummer H2 with free-flowing, mandrel-bent 409 stainless steel tubing. This system is specifically tuned to provide a significant increase in exhaust efficiency and a more aggressive tone without becoming overwhelming inside the cabin during highway cruising.

Built for long-term durability and ease of installation, this kit features heavy-duty 409SS construction and includes high-quality hardware with factory-style hangers for a precise fit. The system is completed with a polished chrome stainless steel tip, providing a high-end finish to the rear exit.

• Large diameter 409 stainless steel mandrel-bent tubing for maximum flow
• High-flow stainless steel performance muffler reduces backpressure
• Polished chrome stainless steel exhaust tip
• Factory-style hangers and high-quality hardware included for secure mounting
• Manufacturer Part Number: 40-3023

Fits 1964-1966 Ford Mustang models including Base, Shelby GT-350, and Shelby GT-350H (260-428).

The JBA 40-2653 Header-Back Exhaust System is engineered to replace restrictive factory piping with high-flow 409 stainless steel. Designed specifically for the classic Mustang dual through-valance exit, this system balances an aggressive exhaust tone with improved volumetric efficiency. Each kit features large-diameter mandrel-bent tubing to maintain consistent exhaust velocity and reduce backpressure compared to standard crush-bent alternatives.

• Constructed from durable 409 stainless steel for long-term corrosion resistance.
• Mandrel-bent tubing ensures maximum exhaust flow and performance gains.
• Includes high-flow stainless steel mufflers for a deep, tuned sound without excessive drone.
• Finished with polished chrome stainless steel tips for a period-correct aesthetic.
• Uses factory-style hangers and includes high-quality hardware for a precise fit.
• Manufacturer Part Number: 40-2653

Fits select 2011-2014 Ford F-150 (2.7L / 3.5L / 5.0L).

Replace your restrictive factory exhaust with a JBA 409 stainless steel cat-back system designed to improve exhaust flow and engine efficiency. This single-exit system is engineered to provide a tuned, performance-oriented tone that enhances your truck's character without becoming intrusive during daily driving. Constructed with mandrel-bent tubing, this kit maintains a consistent diameter throughout every bend to minimize backpressure.

Built for durability and ease of installation, the system utilizes factory-style hangers for a secure fit and includes high-quality hardware. The high-flow stainless steel muffler is paired with a polished chrome stainless steel tip for a finished, professional look.

• Material: 409 Stainless Steel
• Tubing Type: Mandrel-bent large diameter tubing
• Exit Style: Single exit, passenger side
• Muffler: High-flow stainless steel
• Tip: Polished chrome stainless steel
• Installation: Uses factory-style hangers; hardware included
• Manufacturer Part Number: 40-2528

Fits 2011-2021 Dodge Durango models equipped with the 5.7L engine.

The JBA 40-1538 Axle-Back Exhaust System is engineered to replace the restrictive factory rear section with a high-flow, 409 stainless steel solution. This dual rear exit system improves exhaust scavenging and provides a deeper, more aggressive performance tone without becoming overwhelming inside the cabin. By utilizing free-flowing mandrel-bent tubing, this system reduces backpressure to improve overall engine efficiency.

Built for durability and precise fitment, the kit includes high-flow stainless steel mufflers and polished chrome tips for a refined aesthetic. The system utilizes factory-style hangers and includes all necessary heavy-duty hardware for a straightforward installation that bolts into the original mounting points.

• Constructed from 409 stainless steel mandrel-bent tubing for consistent flow
• Includes high-flow stainless steel mufflers tuned for a performance exhaust note
• Dual rear exit design finished with polished chrome tips
• Factory-style hangers ensure a precise, secure fitment
• Complete kit includes all required high-quality installation hardware
• Manufacturer Part Number: 40-1538

Fits 2005-2015 Nissan Armada models including LE, SE, SL, SV, Platinum, and Titanium (5.6L).

Replace your restrictive factory exhaust with the JBA 40-1405 409SS Single Exit Cat-Back Exhaust System to improve flow, efficiency, and tone. This system is engineered using large-diameter, mandrel-bent 409 stainless steel tubing to minimize backpressure and maximize exhaust velocity. The included high-flow stainless steel muffler is specifically tuned to provide a deep, aggressive exhaust note without the drone often found in lesser systems.

Designed for a direct fit, this passenger-side exit system utilizes factory-style hangers and includes all necessary high-quality hardware for a secure installation to existing mounting points. The system is finished with a polished chrome stainless steel tip for lasting corrosion resistance and a clean look.

• Durable 409 stainless steel tubing for long-term performance
• Free-flowing mandrel-bent design for optimized exhaust flow
• High-flow stainless steel muffler for improved sound and power
• Polished chrome stainless steel exhaust tip
• Factory-style hangers for straightforward bolt-on installation
• Complete installation hardware kit included
• Manufacturer Part Number: 40-1405

Fits select 2003-2011 Toyota 4Runner, FJ Cruiser, Tacoma, and Tundra (4.0L V6) without Air Injection System (A.I.R.).

JBA Cat4Ward shorty headers (MPN: 2035S) are a direct performance upgrade for restrictive factory manifolds. Engineered to increase engine efficiency, these headers produce significant power and torque gains by optimizing exhaust flow. Each set is constructed from mandrel-bent 409 stainless steel to ensure consistent tubing diameter and withstand the thermal stress of heavy towing, off-roading, or daily driving.

These headers feature JBA’s proprietary Firecone collector, a race-proven design that maximizes scavenging for improved throttle response. The 3/8-inch thick machined flanges provide a stable sealing surface to prevent leaks, even under high-heat conditions.

• Material: Raw 409 Stainless Steel
• Primary Tube Diameter: 1-1/2 inch
• Flange Design: 3/8-inch thick machined with oversized ports
• Collector: Proprietary JBA Firecone design
• Fitment: Specific to 4.0L V6 models without Air Injection
• Tubing: Mandrel-bent for unrestricted flow
• Hardware: Includes factory-style emission connections and installation hardware

Fits 1995-2000 Toyota Tacoma models (3.4L V6) without EGR.

Replace your restrictive stock exhaust manifolds with JBA Cat4Ward shorty headers to unlock hidden power and improve engine efficiency. Specifically engineered for the 3.4L Toyota V6, these headers feature 1-1/2 inch primary tubes and the proprietary JBA Firecone collector design. This race-proven technology optimizes exhaust flow to produce maximum torque and horsepower gains in the mid-range RPM band where you need it most for towing and daily driving.

Constructed from durable 409 stainless steel, these headers are built to withstand the high temperatures and stresses of heavy-duty use. The 3/8 inch thick machined flanges ensure a secure, leak-free seal against the cylinder head, while the mandrel-bent tubing maintains consistent diameter throughout the bends for superior flow velocity.

• Durable 409 stainless steel construction for long-term reliability
• Mandrel-bent 1-1/2 inch primary tubes for optimized exhaust flow
• Proprietary JBA Firecone collector design for increased power and torque
• 3/8 inch thick machined flanges with oversized exhaust ports
• Extra-thick collector domes for a professional, no-leak installation
• Engineered specifically for models without EGR (Exhaust Gas Recirculation)
• Includes factory-style emission connections and high-quality hardware
• Manufacturer Part Number: 2032S-1

Fits 2005-2007 Toyota Sequoia and 2005-2006 Toyota Tundra (4.7L).

JBA Cat4Ward shorty headers are a direct performance replacement for restrictive factory exhaust manifolds. By reducing backpressure and improving exhaust scavenging, these headers increase power and efficiency throughout the powerband. Built to withstand the high temperatures and stresses of towing and daily driving, each header is manufactured from durable 409 stainless steel with mandrel-bent tubing to ensure consistent flow diameters.

These headers feature JBA's proprietary Firecone collector, a race-proven design that maximizes exhaust velocity. The heavy-duty 3/8-inch machined flanges utilize oversized exhaust ports to provide a robust, leak-free seal at the cylinder head. The system includes all necessary hardware and factory-style emissions connections for a professional installation that maintains original system functionality.

• Manufacturer Part Number: 2011S
• Material: Raw 409 Stainless Steel
• Primary Tube Diameter: 1-1/2 inch
• Flange Thickness: 3/8 inch machined
• Tubing Type: Mandrel-bent
• Collector Design: JBA Firecone
• Features: Oversized exhaust ports and extra thick collector domes
• Includes: Installation hardware and factory-style emissions connections

Fits 2000-2004 Toyota Tundra and 2001-2004 Toyota Sequoia (4.7L). These JBA Cat4Ward shorty headers are engineered to replace restrictive factory cast iron manifolds, improving exhaust flow for increased power and efficiency during towing and daily driving.

Constructed from mandrel-bent 409 stainless steel tubing, these headers feature JBA's proprietary Firecone collector technology to optimize exhaust scavenging. The 3/8-inch thick machined flanges prevent warping and ensure a flat sealing surface against the cylinder head, while oversized exhaust ports accommodate high-flow applications. Each kit includes high-quality hardware and factory-style emission connections for a straightforward, bolt-on installation.

• Manufacturer Part Number: 2010S
• Primary Tube Diameter: 1-1/2 inch
• Material: Raw 409 Stainless Steel
• 3/8" thick CNC machined flanges
• Proprietary JBA Firecone collector design
• Mandrel-bent tubing for maximum flow
• Extra thick collector domes to prevent leaks
• Includes necessary installation hardware

Fits select 2009-2022 Chrysler 300, Dodge Challenger, and Dodge Charger (5.7L).

JBA Cat4Ward shorty headers (MPN: 1964S-1JS) provide a direct-replacement performance upgrade for the 5.7L HEMI engine, offering significantly less restriction than heavy stock cast-iron manifolds. Constructed from mandrel-bent stainless steel with a silver ceramic coating, these headers improve thermal efficiency and withstand the rigors of daily driving, towing, or performance use. The proprietary JBA Firecone collector optimizes exhaust scavenging to increase torque and horsepower throughout the RPM range where you drive most.

This system is designed for a professional, leak-free installation, utilizing 3/8-inch thick machined flanges to prevent warping and ensure a tight seal against the cylinder head. These headers include factory-style emission connections to maintain system integrity and high-quality hardware for a straightforward bolt-on process.

• 1-3/4 inch primary tubes for increased exhaust flow and power
• Silver ceramic coating for superior heat insulation and corrosion resistance
• 3/8 inch thick machined flanges with oversized exhaust ports
• Mandrel-bent stainless steel tubing for maximum durability
• Proprietary Firecone collector technology for improved scavenging
• Extra thick collector domes for a reliable, leak-free seal
• Includes factory-style emission connections and high-quality hardware
• Manufacturer Part Number: 1964S-1JS

Fits select 2009-2022 Chrysler 300, Dodge Challenger, and Dodge Charger (5.7L HEMI).

Replace restrictive factory cast iron manifolds with JBA Cat4Ward shorty headers to unlock horsepower and torque across the RPM range. Designed for a direct-replacement fit, these headers utilize mandrel-bent 409 stainless steel tubing to maintain high exhaust gas velocity and improve scavenging. The proprietary JBA Firecone® collector uses race-proven geometry to merge exhaust pulses efficiently, providing gains where you need them most in daily driving and performance applications.

Built to endure the heat of heavy towing and high-performance use, these headers feature 3/8-inch thick CNC machined flanges that resist warping and ensuring a leak-free seal. Oversized exhaust ports allow for maximum flow, while the retention of factory-style emission connections ensures your vehicle remains compliant. This complete kit includes high-quality hardware required for a professional installation.

• 1-3/4 inch primary tubes for optimized 5.7L HEMI exhaust flow
• Durable mandrel-bent 409 stainless steel construction
• Proprietary Firecone collector for maximum torque gains
• 3/8-inch thick machined flanges with oversized ports
• Extra-thick collector domes to prevent leaks
• Retains factory emission connections
• Finish: Raw 409SS
• Manufacturer Part Number: 1964S-1

Fits 2005-2008 Chrysler 300, Dodge Charger, and Dodge Magnum (5.7L HEMI).

JBA Cat4Ward shorty headers are a direct-fit performance upgrade designed to replace restrictive factory exhaust manifolds. These headers improve engine breathing and efficiency by utilizing 1-3/4 inch mandrel-bent 409 stainless steel tubing, which maintains consistent internal diameters for smoother exhaust gas flow. Each set features JBA’s proprietary Firecone collector, a race-proven design that optimizes scavenging to increase torque and horsepower throughout the powerband.

Built for durability in demanding conditions, these headers include 3/8 inch thick machined flanges that resist warping and provide a secure, leak-free seal. The extra-thick collector domes and oversized exhaust ports ensure a professional fit, while integrated factory-style emission connections keep your vehicle compliant without sacrificing performance.

• Manufacturer Part Number: 1964S
• Primary Diameter: 1-3/4in
• Material: 409 Stainless Steel (Raw Finish)
• Flange Type: 3/8in Machined
• Collector Design: Proprietary JBA Firecone
• Emission Connections: Factory style
• Hardware: High-quality mounting hardware included

Fits 2019-2022 Ram 1500 models (5.7L).

JBA Cat4Ward shorty headers are a direct-replacement performance upgrade for the 2019-2022 Ram 1500 5.7L HEMI, engineered to significantly reduce exhaust restriction compared to restrictive factory cast manifolds. These headers feature JBA’s proprietary Firecone collector, utilizing race-proven technology to maximize torque and power in the RPM range used for towing and daily driving. Constructed from mandrel-bent stainless steel with a silver ceramic coating for superior heat management, they are built to withstand high-duty cycles.

Designed for a professional, leak-free installation, the 1961S-3JS kit maintains factory-style emission connections and includes high-quality hardware. The 3/8-inch thick machined flanges ensure a precise seal against the cylinder head, preventing warping and exhaust leaks under extreme temperatures.

• 1-5/8 inch primary tubes for optimized exhaust scavenging
• Silver ceramic coating reduces engine bay temperatures and protects against corrosion
• Mandrel-bent stainless steel tubing ensures consistent flow throughout bends
• 3/8-inch thick machined flanges with oversized exhaust ports for a secure seal
• Proprietary JBA Firecone collector design for increased exhaust velocity
• Extra thick collector domes for a reliable, no-leak connection
• Includes factory-style emission connections and mounting hardware
• Manufacturer Part Number: 1961S-3JS

Fits select 2019-2022 Ram 1500 models (5.7L HEMI). JBA Cat4Ward shorty headers are a direct-fit performance upgrade designed to replace restrictive factory exhaust manifolds. These headers improve engine efficiency by increasing exhaust flow, resulting in significant gains in power and torque for towing, hauling, and daily driving.

Constructed from durable 409 stainless steel, these headers feature mandrel-bent 1-5/8 inch primary tubes that maintain consistent exhaust gas velocity. The 3/8-inch thick machined flanges utilize oversized exhaust ports to ensure a leak-free seal and prevent heat-induced warping. Each set includes JBA’s proprietary Firecone collector for optimized scavenging and factory-style emission connections for a straightforward installation.

• Primary Tube Diameter: 1-5/8 inch
• Material: 409 Stainless Steel
• Finish: Raw
• Flange Thickness: 3/8 inch machined
• Collector Design: JBA Firecone
• Ports: Oversized exhaust ports
• Emissions: Factory style connections included
• Hardware: High-quality mounting hardware included
• Manufacturer Part Number: 1961S-3

Fits select 2009-2022 Dodge and Ram 1500, 1500 Classic, and 2500 models equipped with the 5.7L HEMI engine.

JBA Cat4Ward shorty headers are engineered to replace restrictive factory exhaust manifolds with a high-flow, mandrel-bent solution. Built from durable 409 stainless steel, these headers are designed to withstand the thermal stress of heavy towing and daily driving. The proprietary JBA Firecone collector uses race-proven technology to improve exhaust scavenging, resulting in increased torque and power in the mid-to-high RPM range where truck owners need it most.

Each header features heavy-duty 3/8-inch thick machined flanges to prevent warping and ensure a proper seal against the cylinder head. The oversized exhaust ports accommodate high-flow requirements, while factory-style emission connections allow for a direct-replacement installation using the included high-quality hardware.

• Construction: Mandrel-bent 409 stainless steel tubing
• Primary Diameter: 1-5/8 inch
• Flange: 3/8-inch thick machined flange with oversized ports
• Collector: Proprietary JBA Firecone design
• Finish: Raw stainless steel
• Emissions: Includes factory-style emission connections
• Manufacturer Part Number: 1961S-2

Fits 2003-2008 Dodge Ram 1500, 2500, and 3500 (5.7L HEMI).

JBA Cat4Ward shorty headers are a direct-fit performance upgrade designed to replace restrictive factory cast iron manifolds. Engineered for the 5.7L HEMI engine, these headers feature mandrel-bent stainless steel tubing to improve exhaust gas velocity and scavenge cylinders more effectively than stock components. The silver ceramic coating provides a durable finish that reduces under-hood temperatures and protects the substrate from corrosion.

Built for the rigors of towing and daily driving, these headers utilize JBA’s proprietary Firecone collector, a race-proven design that directs exhaust flow to maximize low-end torque and mid-range power. The 3/8-inch thick machined flanges ensure a flat sealing surface to prevent leaks, while oversized exhaust ports accommodate modified cylinder heads. Each kit includes factory-style emission connections and high-quality hardware for a straightforward installation.

• Manufacturer Part Number: 1961S-1JS
• 1-5/8 inch primary tubes for optimized flow
• Mandrel-bent stainless steel construction
• Silver ceramic thermal barrier coating
• Heavy-duty 3/8 inch machined flanges
• Proprietary Firecone collector design
• Extra-thick collector domes to prevent leaks
• Includes necessary mounting hardware and gaskets

Fits 2003-2008 Dodge Ram 1500, 2500, and 3500 (5.7L).

JBA Cat4Ward shorty headers are a premier performance upgrade designed to replace restrictive factory exhaust manifolds. By reducing backpressure, these headers significantly improve engine efficiency and power output. Constructed from 409 stainless steel, they are engineered to withstand the thermal stress of heavy towing, racing, and daily transit. These headers feature JBA’s proprietary Firecone collector technology, which optimizes exhaust scavenging for increased torque across the RPM range. Each set includes 3/8-inch thick machined flanges to prevent warping and factory-style emission connections for a straightforward installation.

• Material: 409 Stainless Steel (Raw Finish)
• Primary Diameter: 1-5/8 in.
• Flange Thickness: 3/8 in. Machined
• Tubing: Mandrel-bent for maximum flow
• Collector: Proprietary JBA Firecone design
• Ports: Oversized exhaust ports for improved scavenging
• MPN: 1961S-1

Includes high-quality hardware and required gaskets for a professional, leak-free seal.