This JKS Manufacturing Front Adjustable Track Bar is engineered to restore proper suspension geometry on lifted Jeeps. Fits select 1984-2006 Jeep Wrangler TJ/LJ, Cherokee XJ, Grand Cherokee ZJ, and Comanche MJ models with 4 inches or more of suspension lift.

When you increase ride height, the fixed-length factory track bar pulls the front axle out of alignment. This adjustable bar allows you to precisely center the axle under the chassis, improving handling characteristics and ensuring the coil springs and suspension components operate through their intended range of motion. Built with heavy-duty materials to withstand off-road stress, it replaces the factory unit and provides a significantly stronger link between the axle and the frame.

• Manufacturer Part Number: JKSOGS125
• Position: Front
• Minimum Lift Height: 4.0 in.
• Construction: Heavy-duty tubular steel with fine-threaded adjustment
• Fitment: Direct replacement for OE track bar on vehicles with 4"+ lift

Fits select 1993-2006 Jeep Wrangler TJ and Grand Cherokee ZJ models.

Lifting your Jeep naturally pulls the rear axle out of alignment due to the fixed length of the factory track bar. The JKS Manufacturing Rear Adjustable Track Bar (MPN JKSOGS151B) provides the adjustability needed to precisely re-center your axle under the chassis. This kit includes a dedicated relocation bracket to maintain a flatter track bar angle, which improves suspension travel and roll center stability for better handling both on and off-road.

• Heavy-duty construction replaces thin-walled factory components
• Adjustable design allows for fine-tuned axle centering at various lift heights
• Relocation bracket included to optimize suspension geometry
• Designed to bolt to factory mounting points for secure installation
• Manufacturer Part Number: JKSOGS151B

Fits 1997-2001 Honda Prelude Type SH and SiR-S (H-Series).

The Innovative Competition Traction Bar kit (MPN 50111) is engineered to enhance front-end stability and power delivery for the H-Series Honda Prelude. By reinforcing the front suspension geometry and anchoring the lower control arms, this kit effectively eliminates wheel hop and improves traction during high-load launches and aggressive cornering. This is an essential upgrade for high-horsepower street builds and track-dedicated vehicles looking to improve 60ft times and steering response.

• Reduces wheel hop and improves front-end rigidity
• Optimizes suspension geometry for better traction and consistency
• Direct replacement for the factory front crossmember
• Designed specifically for H-Series equipped 1997-2001 Prelude Type SH and SiR-S models
• Manufacturer Part Number: 50111

Fits 2014-2024 Infiniti Q50 and 2017-2022 Infiniti Q60 models.

The ISR Performance Rear Traction Rods (IS-RTR-Q60) are engineered to provide essential adjustability for the rear suspension geometry of the Infiniti V37 and CV37 platforms. When lowering these vehicles, the factory non-adjustable links often result in unstable alignment settings. These rods allow for precise tuning of the rear wheel's fore and aft position, helping to eliminate bump steer and improve overall stability.

• Replaces soft factory bushings with high-strength rod ends for reduced deflection
• Heavy-duty construction designed for track and performance street use
• Fully adjustable design allows for precise rear suspension alignment
• Direct bolt-on replacement for factory rear traction links
• Helps maintain consistent tire contact patch during hard acceleration and cornering
• Manufacturer Part Number: IS-RTR-Q60

Fits 1988-1991 Honda Civic and CRX, and 1990-1993 Acura Integra (JDM/EDM Right-Hand Drive models).

The Innovative Mounts Competition Traction Bar (MPN 59311) is designed to stabilize the front suspension and eliminate wheel hop in B-Series swapped 1988-1993 Honda and Acura chassis. By replacing the bulky factory crossmember, this bar improves front-end rigidity and ensures more consistent launches, making it a critical upgrade for high-horsepower street cars and dedicated drag builds. This specific version is engineered for JDM and EDM Right-Hand Drive (RHD) vehicles to provide proper clearance for steering and drivetrain components.

• Specifically engineered for B-Series engine swaps
• Designed for JDM/EDM Right-Hand Drive (RHD) chassis clearance
• Significantly reduces wheel hop and improves traction
• Increases front-end rigidity for better high-speed stability
• Bolts directly to factory mounting locations
• Durable finish for long-term corrosion resistance
• Manufacturer Part Number: 59311

Fits 1984-2006 Jeep TJ Wrangler, LJ Wrangler Unlimited, XJ Cherokee, ZJ Grand Cherokee, and MJ Comanche.

The Synergy Manufacturing Front Adjustable Track Bar is a critical upgrade for any lifted Jeep, designed to re-center the front axle and restore correct suspension geometry. By replacing the non-adjustable factory unit, this heavy-duty bar allows for precise alignment, helping to eliminate axle shift and reduce the risk of steering instability or "death wobble."

• Adjustable design allows for precise axle centering at various lift heights
• Heavy-duty construction provides superior strength over thin OE components
• Improves overall handling and steering response for on and off-road use
• Bolt-on installation to factory mounting points
• Manufacturer Part Number: 8155-01

Fits 2007-2018 Jeep Wrangler and Wrangler Unlimited JK.

RockJock’s adjustable front trac bar is engineered for Jeep owners who demand superior steering precision and axle control. Constructed from heavy-duty forged 4130 chromoly, this bar features a unique organic shape that can only be achieved through forging. This specific geometry ensures maximum clearance for various differential covers and suspension components even under full articulation. Unlike fabricated bars, the extreme rigidity of this forged component eliminates flex, delivering a noticeably tighter and more responsive feel during on-road driving and off-road maneuvers.

• Forged 4130 chromoly construction for ultimate strength and durability
• Dual high-articulation Johnny Joint rod ends for unrestricted suspension travel
• Adjustable length with a reliable pinch-clamp end to perfectly center the front axle
• Greasable design via integrated zerk fittings for ease of maintenance
• Semi-gloss black powder coat finish on the bar with gold zinc plating on the Johnny Joints
• Designed for lifted vehicles but adjustable to fit stock height applications
• Manufacturer Part Number: RJ-9120FJKF

Fits select 1984-2006 Jeep Cherokee XJ, Comanche MJ, Grand Cherokee ZJ, and Wrangler TJ/LJ models with 1.0 to 3.5 inches of suspension lift.

The JKS Manufacturing adjustable front track bar is an essential component for lifted Jeep applications, designed to re-center the axle housing under the chassis and restore correct suspension geometry. Unlike fixed-length factory bars, this variable-length design allows for fine-tuning of the axle position to prevent undue stress on related steering and suspension components. It is constructed from heavy-wall CNC-bent DOM tubing that follows OE clearance paths for a precise fit.

To provide a balance of articulation and road manners, this track bar features a hybrid bushing system: a spherical urethane bushing for unrestricted travel at one end and a premium rubber bushing at the other to isolate noise, vibration, and harshness (NVH). The assembly is finished with a combination of zinc plating and powder coating for maximum resistance to corrosion and trail debris.

• Part Number: JKSOGS126
• Lift Height Range: 1.0 - 3.5 inches
• Material: High-strength DOM tubing
• Finish: Zinc plated and powder coated
• Bushing Configuration: Spherical urethane and premium rubber
• Adjustment: Fine threads for ultra-precise axle positioning

Note: Vehicles equipped with a Dana 30 front axle and an aftermarket differential cover may require bump stop adjustment if the lift height is less than 3.0 inches to prevent component interference.

Fits select 2007-2018 Jeep Wrangler JK and Wrangler JK Unlimited (0-6" Lift).

The JKS Manufacturing JKSOGS121 adjustable front track bar is a critical upgrade for lifted Wranglers, allowing you to precisely center the axle housing under the chassis. By restoring correct geometry, this track bar prevents undue stress on steering and suspension components while improving handling characteristics. The variable length design accommodates everything from stock height to 6-inch lift kits.

Engineered for extreme off-road durability, the bar is constructed from 1.5-inch diameter DOM tubing with a massive 3/8-inch wall thickness. It features 1-1/4-inch fine threads for ultra-precise axle positioning and utilizes CNC-bent OE-style geometry for maximum clearance. To maintain ride quality, JKS equips both ends with heavy-duty rubber bushings that provide quiet, vibration-free operation without the harshness of heim joints.

• Corrects axle alignment on Jeep Wrangler JK models with 0-6 inches of lift
• 1.5" x 0.375" wall DOM steel tubing construction for superior strength
• 1-1/4" fine adjustment threads for precise axle centering
• Premium rubber bushings reduce NVH (noise, vibration, and harshness)
• Zinc-plated and powder-coated finish for long-term corrosion protection
• Simple bolt-on installation to factory mounting points
• Manufacturer Part Number: JKSOGS121

Fitment Note: Designed for Left-Hand Drive (LHD) models only. Does NOT fit Right-Hand Drive (RHD) vehicles.

Fits select 2007-2018 Jeep Wrangler JK (Rubicon, Sahara, Sport, X, and 70th/75th Anniversary models).

Correct your axle alignment and optimize suspension travel with the JKS Manufacturing Front Heavy Duty Adjustable Track Bar. Modern JK suspension setups often provide enough droop travel to exceed the limits of standard axle bushings. JKS solves this by utilizing a high-misalignment spherical COM bearing at the axle end and a reliable OE-style rubber bushing at the frame, allowing you to run longer shocks without binding or premature wear.

Constructed from high-strength DOM tubing with OE-style bends, this track bar provides superior clearance and durability over the factory panhard rod. The fine-thread adjustment allows for ultra-precise axle centering after a lift, while the included misalignment spacers maximize angular travel at the axle.

• Manufacturer Part Number: JKSOGS120
• High-strength DOM tube construction with precision OE bends for clearance
• Replaceable COM bearing with self-lubricating, injection-molded race
• 42,000 lbs static load rating on spherical bearing for extreme durability
• Variable length design allows for precise axle centering and reduced component stress
• Includes high-angle misalignment spacers to ensure maximum articulation
• Direct replacement for original fixed-length front track bar

Fits 1987-1995 Jeep Wrangler (Base, Islander, Laredo, Renegade, Rio Grande, S, Sahara, SE, and Sport).

Give your leaf-sprung Jeep Wrangler YJ the benefits of track bar stability without sacrificing the articulation needed for the trail. The JKS Manufacturing front telescoping track bar (MPN: JKS9800) is engineered to provide up to 31 percent more suspension travel than a solid track bar, significantly improving off-road performance while retaining critical on-road handling and highway stability.

This design eliminates the need for track bar relocation brackets, which are often the primary cause of induced bump steer in lifted applications. For durability in harsh environments, the assembly features a zinc-plated and powder-coated finish to resist corrosion and debris. Maintenance is simplified with a greaseable slip-shaft design, while high-quality Teflon-lined heim joints prevent binding and reduce stress on your vehicle's factory mounting points.

• Provides 31% more suspension travel than a solid track bar
• Greaseable slip-shaft ensures smooth, silent telescoping operation
• Teflon-lined heim joints eliminate binding and component stress
• Dual-stage finish: Zinc plated and powder coated for maximum protection
• Direct replacement for the factory track bar; prevents bump steer without relocation brackets
• Manufacturer Part Number: JKS9800

Fits 2007-2018 Jeep Wrangler JK and Wrangler Unlimited JKU models.

The Synergy 8075-02 Front Track Bar is engineered to center the front axle under your Jeep after installing a suspension lift. Proper axle alignment is critical for maintaining correct steering geometry and preventing handling issues. This heavy-duty adjustable bar allows for precise centering and replaces the weaker factory unit with a more robust component designed for the rigors of off-road use.

• Allows for precise centering of the front axle on lifted Jeep JK applications
• On-vehicle adjustable design enables easy length changes without removing the bar
• Heavy-duty construction improves steering feel and resists bending under trail stress
• Includes high-quality bushings for reduced deflection and maintenance-free operation
• Compatible with factory or aftermarket steering stabilizers
• Manufacturer Part Number: 8075-02

Fits 2007-2018 Jeep Wrangler JK (Right Hand Drive models only) with suspension lifts ranging from 0 to 6 inches.

Restore proper suspension geometry and lateral axle alignment on your lifted RHD Jeep Wrangler JK with the JKS Manufacturing adjustable rear track bar. When suspension height is increased, the factory-length panhard rod pulls the axle housing out of alignment with the chassis. This heavy-duty replacement allows for ultra-precise centering of the rear axle, preventing undue stress on suspension components and improving overall handling predictability.

Built for the trail, this track bar is constructed from thick-wall, CNC-bent DOM tubing for maximum rigidity. It features a variable length design with 1-1/4 inch fine adjustment threads, allowing for minute changes to suit your specific ride height. Premium-grade rubber bushings are used at both ends to ensure quiet, vibration-free operation while maintaining the durability required for off-road use.

• Replaces original fixed-length panhard rod to center axle housing
• Heavy-duty DOM tube construction with OE-style bends for proper clearance
• Zinc-plated and powder-coated finish for superior corrosion resistance
• Precision 1-1/4 inch fine threads for exact axle positioning
• Premium rubber bushings provide long-lasting comfort and quietness
• Manufacturer Part Number: JKSOGS159
• Includes all necessary hardware for a direct bolt-on installation

Fits 1993-1998 Jeep Grand Cherokee ZJ (Base, Laredo, Limited, Orvis, SE, TSi, 5.9 Limited). Does not fit models equipped with the Dana 44 rear axle or Right Hand Drive (RHD) vehicles.

Properly align your rear axle and restore lateral control with the JKS Manufacturing adjustable track bar. Designed for Grand Cherokee ZJ models with 1 to 6 inches of suspension lift, this heavy-duty bar allows for ultra-precise axle positioning to compensate for geometry changes caused by increased ride height. By centering the axle housing under the chassis, you eliminate undue stress on related suspension components and ensure consistent handling.

• Manufactured from high-strength, CNC-bent DOM tubing for maximum durability and OE-style clearance
• Equipped with high-performance Dura-Thane polyurethane bushings at both ends for improved steering response and reduced deflection
• Fine adjustment threads allow for precise centering of the axle housing
• Dual-stage finish includes zinc plating and a durable powder coat for superior corrosion resistance
• Direct bolt-on installation replaces the factory fixed-length panhard rod
• Manufacturer Part Number: JKSOGS155

Fits select 1997-2006 Jeep Wrangler TJ and LJ models, including Rubicon, Sahara, Sport, SE, X, and Unlimited. This JKS Manufacturing heavy-duty rear adjustable track bar is designed to properly center the rear axle housing under the chassis after installing a suspension lift.

Constructed from 1.25-inch diameter DOM tubing with a thick 0.25-inch wall, this track bar replaces the factory fixed-length panhard rod to eliminate axle shift and prevent undue stress on suspension components. It features a variable-length design with 1.25-inch fine threads for ultra-precise positioning. For maximum articulation, it utilizes a spherical urethane bushing at one end to allow unrestricted travel, while a high-performance urethane bushing at the frame end maintains sharp steering responsiveness. The CNC-bent geometry ensures OE-style clearance for all underbody components.

• Fits Jeep Wrangler TJ/LJ with 0 to 6 inches of suspension lift
• Manufactured from heavy-duty 1.25" x 0.25" wall DOM tubing
• Zinc-plated and powder-coated finish for superior corrosion resistance
• Spherical urethane bushing allows for maximum suspension bind-free travel
• Direct bolt-on installation to factory mounting points
• Manufacturer Part Number: JKSOGS151

Fits select 1984-2006 Jeep Cherokee XJ, Comanche MJ, Grand Cherokee ZJ, and Wrangler TJ models. This JKS Manufacturing front adjustable track bar is an essential upgrade for lifted Jeeps, allowing you to properly re-center the axle housing under the chassis to maintain correct steering geometry and prevent binding.

Built for the rigors of off-road use, this track bar replaces the light-duty factory panhard rod with heavy-duty 1.25-inch diameter DOM tubing featuring a 0.250-inch wall thickness. The CNC-bent design ensures maximum clearance for suspension travel while the 1-1/4 inch fine adjustment threads allow for ultra-precise positioning of the axle. To ensure a quiet ride and responsive steering, it utilizes a combination of spherical urethane and high-performance urethane bushings to isolate vibration without sacrificing control.

• Precise Alignment: Variable length design allows for fine-tuning to suit specific lift heights and suspension components.
• Rugged Construction: Heavy-duty 1.25" x .250"-wall DOM tubing provides superior strength over OE components.
• Premium Finish: Dual-stage protection with zinc plating and a durable powder coat finish for maximum corrosion resistance.
• Lift Requirements: Designed for Wrangler TJ with 2.5"+ lift, and Cherokee XJ/MJ or Grand Cherokee ZJ with 3.0"+ lift.
• Installation: Direct bolt-on replacement for the original fixed-length track bar; MPN: JKSOGS128.

Fits 1999-2004 Jeep Grand Cherokee WJ (Laredo, Limited, Overland, Special Edition, Sport).

Recenter the front axle of your Jeep Grand Cherokee WJ after installing a suspension lift. The JKS Manufacturing adjustable front track bar (JKSOGS127) is designed to control lateral movement of the axle housing and properly align the chassis with the axle. Replacing the original fixed-length panhard rod, this variable-length design allows for ultra-precise axle positioning to prevent undue stress on steering and suspension components.

Built for the rigors of off-road use, this track bar is constructed from 1.5-inch OD thick-wall DOM tubing. It is CNC bent to ensure correct geometry and maintain critical clearances under the front of the vehicle. High-performance Dura-Thane polyurethane bushings are utilized to improve steering responsiveness and durability over factory rubber. Fine adjustment threads and a 1.5-inch jam nut provide a positive lock once the axle is centered.

• Replaces OE fixed-length panhard rod to correct axle alignment on lifted vehicles
• 1.5-inch OD heavy-duty DOM steel tubing with CNC-accurate bends
• Dura-Thane polyurethane bushings for increased steering feel and longevity
• Durable gloss black powder coat and zinc-plated end for superior corrosion resistance
• 1.5-inch jam nut with fine adjustment threads for precise locking
• Part Number: JKSOGS127

Fits select 2018-2025 Jeep Wrangler JL/JLU and 2020-2023 Jeep Gladiator JT models.

Recenter the front axle of your lifted Jeep to correct geometry and control lateral movement with the JKS Manufacturing adjustable front track bar. This heavy-duty bar is designed to eliminate the axle shift common with suspension lifts while providing significantly higher strength than the factory fixed-length unit. Built from 1.5" OD thick-wall DOM tubing, it is CNC-formed to ensure proper clearance under the chassis and maintains factory mounting points for a straightforward installation.

The variable length design uses fine threads and a 1.5" jam nut for precise centering of the axle housing. To maintain ride quality and isolate noise, vibration, and harshness (NVH), JKS utilizes premium durometer-specific rubber bushings pre-installed at both ends. This track bar is finished in a durable gloss black powder coat with a zinc-plated end for maximum corrosion resistance in harsh off-road environments.

• Fits vehicles with 0 to 4.5 inches of lift height
• Constructed from high-strength 1.5" OD thick-wall DOM tubing
• Fine-thread adjustment with 1.5" jam nut for positive locking
• Includes durometer-specific rubber bushings to isolate NVH
• Compatible with OE-style mounting points
• Durable gloss black powder coat and zinc-plated finish
• Manufacturer Part Number: JKSOGS123

Fits 2007-2018 Jeep Wrangler and Wrangler JK Right Hand Drive (RHD) models.

When lifting a Jeep Wrangler JK, the factory track bar geometry pulls the axle housing away from the center of the chassis. The JKS Manufacturing adjustable front track bar corrects this alignment, centering the axle and restoring steering geometry on vehicles with up to 6 inches of lift. This heavy-duty component replaces the thin factory bar with high-strength 1.5-inch diameter DOM tubing featuring a 3/8-inch wall thickness for maximum rigidity under off-road stress.

Built for durability and precision, the bar utilizes CNC-bent tubing to maintain OE clearance and geometry. The 1-1/4 inch fine adjustment threads allow for ultra-precise axle positioning to suit any suspension combination. Both ends are equipped with factory-style rubber bushings to ensure quiet, vibration-free operation while maintaining a firm steering feel without the harshness of poly bushings.

• Fits stock height to 6-inch suspension lifts
• Constructed from 1.5" x .375" wall DOM tubing
• CNC-bent for exact fit and component clearance
• 1-1/4" fine adjustment threads for precise axle positioning
• Durable zinc and powder coat finish for superior corrosion resistance
• Heavy-duty rubber bushings minimize NVH (noise, vibration, harshness)
• Direct bolt-on installation using factory mounting points
• MPN: JKSOGS122

Fits 2018-2024 Jeep Wrangler JL and JLU (2-door and 4-door models).

The Synergy Manufacturing HD Adjustable Front Track Bar (MPN 8875-01) is a heavy-duty suspension upgrade designed to center the front axle after installing a lift kit. By restoring proper suspension geometry, this track bar eliminates the axle shift common on lifted Jeeps, resulting in more predictable handling and improved steering response.

• Specifically engineered for 2018+ Jeep Wrangler JL/JLU platforms.
• Constructed from heavy-duty tubing to minimize deflection and resist bending under off-road stress.
• On-vehicle adjustability allows for precise centering of the axle without removing the component from the vehicle.
• Direct bolt-on replacement for the factory unit, utilizing OEM mounting points for a straightforward installation.
• Manufacturer Part Number: 8875-01.

Fits 2018-2024 Jeep Wrangler JL and JLU (2-door and 4-door) models.

The Synergy Manufacturing HD Adjustable Rear Track Bar is designed to re-center the rear axle of your lifted Jeep Wrangler JL/JLU. When installing a suspension lift, the factory track bar pulls the axle off-center; this heavy-duty replacement allows for precise centering to ensure proper suspension geometry and handling characteristics.

• Adjustable length allows for fine-tuning of axle position on-vehicle
• Heavy-duty construction for increased durability over the factory component
• Designed to clear most aftermarket differential covers
• Replaces the factory rear track bar using existing mounting points
• Manufacturer Part Number: 8862-01

Fits 2003-2013 Dodge Ram 1500, 2500, and 3500 4x4 models.

The Synergy Manufacturing Adjustable Track Bar is a heavy-duty solution for centering the front axle on lifted or leveled Dodge Ram trucks. When ride height is increased on a solid-axle vehicle, the factory fixed-length track bar pulls the axle toward the driver's side, which can lead to tracking issues and uneven tire wear. This adjustable bar allows you to precisely recenter the axle to restore proper suspension geometry and steering feel.

Built to withstand the increased loads of heavy-duty diesel and 4x4 applications, this track bar replaces the wear-prone OE component with a more robust design. It features a double-adjuster mechanism that allows for length changes while the bar is mounted on the vehicle, saving significant time during alignment.

• Fits 2003-2013 Dodge Ram 1500/2500/3500 4x4 trucks.
• Corrects axle shift caused by suspension lifts and leveling kits.
• On-vehicle adjustability for precise centering without removal.
• Compatible with factory mounting points for a direct-replacement installation.
• Manufacturer Part Number: 8550-11

Fits 2007-2018 Jeep Wrangler JK and JKU.

Center your rear axle and restore proper suspension geometry with the Synergy Manufacturing Rear Track Bar. Designed specifically for the JK platform, this heavy-duty adjustable bar replaces the factory component to handle the increased stresses of off-road use and larger tire diameters. It allows for precise lateral axle alignment after installing a suspension lift kit to ensure predictable handling and tracking.

• Fabricated from high-strength 1.25-inch x 0.250-wall 1026 DOM tubing for maximum rigidity
• Adjustable design allows for centering the axle on the vehicle without removing the bar
• Finished in an abrasion-resistant powder coat for long-term corrosion protection
• Corrects axle shift caused by suspension lifts from 0 to 6 inches
• Maintains factory clearance for exhaust and differential covers
• Manufacturer Part Number: 8062-02

Fits 2005-2016 Ford F-250, F-350, F-450, and F-550 Super Duty 4WD trucks.

The Synergy Heavy Duty Adjustable Front Track Bar Adapter (MPN 767510-01) is engineered to restore proper suspension geometry and axle alignment on lifted or leveled Ford Super Duty trucks. This high-strength adapter provides the necessary interface to allow for precise track bar adjustment, ensuring the front axle is perfectly centered under the chassis to maintain predictable handling and even tire wear.

• Manufacturer Part Number: 767510-01
• Enhanced Durability: Heavy-duty construction designed to withstand the increased stresses of off-road use and larger tire diameters.
• Geometry Correction: Helps eliminate tracking issues and reduces the risk of steering oscillation common in modified suspension systems.
• Precise Fitment: Designed specifically for the front axle architecture of 2005-2016 Ford Super Duty platforms.

Correct your axle geometry and restore steering precision with the Synergy MFG Heavy Duty Adjustable Front Track Bar. Engineered specifically for 2005+ Ford F-250 and F-350 Super Duty 4WD trucks, this heavy-duty bar is essential for re-centering the front axle after installing a suspension lift. By bringing the axle back into alignment, it prevents tracking issues and improves overall handling stability.

Built to withstand the loads of oversized tires and heavy off-road use, this track bar is constructed from 1.5-inch OD x .250-wall DOM tubing. It features a double adjuster mechanism, allowing for precise length changes while the bar is still installed on the vehicle—eliminating the tedious process of repeatedly removing and reinstalling the part to find the correct setting. The clear zinc plating provides a durable finish against corrosion and road debris.

• Fits 2005-present Ford F-250 and F-350 Super Duty 4WD models.
• Adjustable length allows for proper axle centering from stock height up to 6 inches of lift.
• Heavy-wall DOM steel construction provides significantly higher strength than the factory unit.
• On-vehicle double adjuster simplifies the alignment process.
• Compatible with factory track bar brackets or dropped brackets for taller lifts.
• Direct bolt-on replacement for a straightforward installation.
• Manufacturer Part Number: 7675-02.

Fits 1987-1995 Jeep Wrangler YJ models including Base, Islander, Laredo, Renegade, Rio Grande, S, Sahara, SE, and Sport.

The Rugged Ridge Rear Track Bar Relocation Bracket is engineered to restore proper suspension geometry and axle alignment on your YJ. Fabricated from heavy-duty steel for maximum durability under off-road conditions, this bracket provides a secure mounting point to ensure your rear axle remains centered during suspension travel. Designed as a direct-fit solution, it installs using existing hardware points to avoid the need for drilling or permanent vehicle modification.

• Manufacturer Part Number: 18305.04
• Material: Heavy-duty steel construction
• Installation: Bolt-on; no drilling or modification required
• Configuration: Single rear bracket
• Compatibility: Replaces or relocates OE rear track bar mounting
• Warranty: Limited 5-year manufacturer warranty

Fits 2007-2018 Jeep Wrangler and Wrangler Unlimited models (JK/JKU).

Maintain proper steering geometry and axle alignment after lifting your Jeep with the Rugged Ridge Front Track Bar Dropdown Bracket. This heavy-duty bracket is engineered to center the front axle, correcting the lateral shift often caused by suspension lifts. By lowering the track bar mounting point, it restores a more natural track bar angle to improve handling and reduce bump steer.

Constructed from high-strength 1/4-inch thick steel, this bracket provides superior durability compared to standard axle-mounted mounts. It features a dual-position design, allowing for a drop of either 2-3/4 inches or 3-1/2 inches to accommodate various lift heights. The installation is a straightforward bolt-on process requiring no drilling, welding, or permanent vehicle modifications.

• Centers front axle on lifted vehicles to restore steering alignment
• Dual-position mounting drops the track bar 2.75 to 3.5 inches
• Fabricated from 1/4-inch thick steel for maximum rigidity
• Direct bolt-on installation with no drilling or welding required
• Manufacturer Part Number: 18205.24

Fits 2018-2026 Jeep Wrangler JL/JLU and 2020-2025 Jeep Gladiator JT (all models and engines). This RockJock Johnny Joint front track bar replaces the factory unit to provide superior rigidity and steering precision for both lifted and stock-height vehicles.

Constructed from heavy-duty forged chromoly, this track bar features a unique organically shaped design specifically engineered to provide maximum articulation and clearance for various differential options. Unlike fabricated bars, the forged construction offers enhanced stiffness, eliminating the steering deflection often felt on larger tire setups. The bar is finished in a durable semi-gloss black powder coat, while the Johnny Joints feature gold zinc plating for corrosion resistance.

• Forged chromoly construction for maximum strength and rigidity
• Dual Johnny Joint rod ends for high-articulation and smooth movement
• Adjustable length with a secure pinch clamp end for precise axle centering
• Fully greasable via integrated zerk fittings
• Organically shaped for maximum differential cover clearance
• Compatible with stock height up to common lift heights
• Manufacturer Part Number: RJ-9120FJLF

Fits all 2021-2026 Ford Bronco models, including Badlands, Base, Big Bend, Black Diamond, Everglades, First Edition, Heritage, Outer Banks, Raptor, Stroppe Edition, and Wildtrak.

The RockJock Johnny Joint adjustable rear trac bar is engineered to provide precise axle centering and maximum suspension articulation for the 2021-up Ford Bronco. Whether your vehicle is stock, lifted, or equipped with larger aftermarket differentials, this bar features specifically designed bends for an exact fit. By utilizing the axle-end adjustability, you can perfectly center the axle under the chassis and optimize driveshaft-to-fuel-tank clearance.

Built for the trail, this trac bar is fabricated from 1-3/8 inch x .120-inch wall DOM tubing for superior strength compared to OE units. It features greasable, narrow Johnny Joint rod ends at both ends to allow for unrestricted movement without the binding associated with rubber or urethane bushings. This bar can be used as a standalone upgrade or in conjunction with the RockJock RJ-181400-101 Trac Bar Relocation Bracket.

• Fits 2021-2026 Ford Bronco (all submodels)
• Fabricated from 1-3/8 in. x .120 in. wall DOM tubing
• Narrow Johnny Joint rod ends for maximum articulation
• Greasable design for long-term serviceability and quiet operation
• Adjustable axle housing end to center the rear axle
• Semi-gloss black powder coat finish with gold zinc plating on the adjuster
• Manufacturer Part Number: RJ-183400-101

Fits 2021-2026 Ford Bronco Badlands, Base, Big Bend, Black Diamond, Everglades, First Edition, Heritage, Outer Banks, Raptor, Stroppe Edition, and Wildtrak.

RockJock's Geometry Correction Axle Bracket for the rear Trac Bar is a critical upgrade for lifted 2021-2026 Broncos. On lifted vehicles, the factory suspension geometry is often compromised, leading to poor handling and lateral instability—especially on rigs equipped with heavy roof racks or rear-mounted accessories. This bracket relocates the axle-side mounting point upward, raising the rear suspension roll center to bring it closer to the vehicle's center of gravity for more predictable handling.

The kit is designed for a simple, 100% bolt-on installation to the factory axle housing. It is compatible with both the factory Trac Bar and aftermarket upgrades, such as the RockJock Johnny Joint adjustable trac bar (RJ-183400-101). To ensure proper clearance for the new mounting hardware, a rear brake line relocation tab is included.

• Corrects suspension roll center and restores lateral geometry
• Finished in durable semi-gloss black powder coat
• Includes all necessary installation hardware and brake line relocation tab
• Works with factory or aftermarket Trac Bars
• Manufacturer Part Number: RJ-181400-101