Restore the performance of your DS18 Project 360 8-inch driver with this genuine factory-spec recone kit. Engineered specifically for the Project 360 series, this kit allows you to replace damaged or worn internal components including the cone, voice coil, spider, and surround, avoiding the cost of a full driver replacement.

• Designed specifically for DS18 Project 360 8-inch drivers
• Includes high-quality cone, voice coil, spider, and surround assembly
• Maintains original Thiele/Small parameters and acoustic signature
• Precision-engineered for a drop-in repair that restores factory sound quality

The DS18 High-Sensitivity Mid-High Loudspeaker is engineered for high-output audio systems that demand extreme efficiency and rapid serviceability. This 8-inch driver is built to bridge the gap between mid-bass and high frequencies, delivering a broad response range of 95Hz to 17kHz with a staggering 102dB sensitivity rating. This high sensitivity allows the speaker to produce massive volume even with moderate power input.

A standout technical feature of this model is the integrated rotating recone kit. This design allows for simplified field maintenance and alignment, making it an ideal choice for competition-grade builds or professional audio environments where downtime must be minimized. The 4-ohm impedance ensures compatibility with a wide range of high-performance car audio amplifiers.

• Diameter: 8 inches
• Nominal Impedance: 4 Ohms
• Sensitivity: 102dB
• Frequency Response: 95Hz - 17kHz
• Type: Mid-High Range Loudspeaker
• Special Feature: Rotating Recone Kit for simplified servicing

Engineered for high-decibel output and professional-grade vocal clarity, the DS18 8-inch High-Sensitivity Mid-High Loudspeaker is built for competition-level audio environments. With a 100.2dB sensitivity rating, this driver is exceptionally efficient, converting power into clear, loud sound that cuts through high ambient noise levels and heavy bass. The frequency response range of 90Hz to 17kHz focuses strictly on the critical mid and high frequencies to ensure your soundstage remains crisp and articulated.

The defining feature of this loudspeaker is the integrated Rotating Recone system. This design facilitates easier field maintenance and part replacement, allowing for faster turnaround without the need to replace the entire speaker housing. Wired at 4 ohms, it is compatible with a wide range of high-performance amplifiers found in pro audio and custom automotive installations.

• Speaker Type: Mid-High Loudspeaker
• Diameter: 8 inches
• Sensitivity: 100.2dB
• Nominal Impedance: 4-Ohm
• Frequency Response: 90Hz - 17kHz
• Feature: Rotating Recone system for efficient maintenance

Restore the performance and acoustic clarity of your audio system with the DS18 Project 360 6x9-Inch Recone Kit. Designed specifically for the Project 360 series, this kit provides a technical solution for repairing blown or damaged speakers without requiring a complete driver replacement. By replacing the internal soft parts, you maintain the original motor and basket while returning the speaker to its factory-spec output and impedance.

This kit is engineered for precise tolerances, ensuring the voice coil and spider align perfectly within the magnetic gap for optimal excursion and power handling. Whether you are correcting a torn surround or a burnt coil from extreme power levels, this recone kit provides the high-performance components needed for a professional-grade overhaul.

• Fits DS18 Project 360 6x9-inch speakers
• Complete soft-part replacement including cone, voice coil, and spider
• Engineered to factory specifications for consistent sound signature
• Durable surround material for long-lasting excursion and response

DS18 high-sensitivity mid-high loudspeakers are engineered for high-output audio systems that demand extreme volume and clarity. Measuring 6x9 inches, these drivers bridge the gap between mid-range and high-frequency reproduction, making them ideal for pro-audio style car builds and competition setups.

These speakers feature a unique rotating recone design, simplifying field repairs and installation adjustments. With a high sensitivity rating of 101dB, they produce significant sound pressure levels (SPL) with efficient power usage. The 95Hz to 17kHz frequency range ensures a punchy, detailed response across the vocal and high-frequency spectrum, providing the crisp definition needed to cut through cabin noise.

• Speaker Size: 6x9"
• Impedance: 4-Ohm
• Sensitivity: 101dB
• Frequency Response: 95Hz - 17kHz
• Design: Mid-High Loudspeaker
• Special Feature: Rotating Recone for simplified servicing and orientation

DS18 high-sensitivity mid-high loudspeakers are engineered for high-volume audio systems where vocal clarity and upper-frequency detail are paramount. These 6x9-inch drivers feature a high 98dB sensitivity rating, allowing them to deliver massive output with high efficiency. The unique rotating recone design is built for specialized installations and easier maintenance, while the broad 90Hz to 17kHz frequency range ensures full-bodied sound across the most critical audio spectrum.

• Speaker Type: 6x9-inch mid-high frequency loudspeaker
• Impedance: 4-ohm
• Sensitivity: 98dB for maximum efficiency and volume
• Frequency Response: 90Hz - 17kHz
• Feature: Innovative rotating recone assembly
• Optimized for high-output mid-range and high-frequency reproduction

The DS18 Project 360 6.5-inch Recone Kit provides everything needed to restore a damaged or blown Project 360 series loudspeaker to its original factory performance. Rather than replacing the entire driver, this kit allows you to retain your existing motor and basket, saving cost while ensuring the acoustic characteristics of your audio system remain consistent.

Built to match the exact specifications of the Project 360 series, this kit features high-quality materials designed to handle the thermal and mechanical stresses of high-output audio applications. Proper installation ensures a precise fit for the voice coil and suspension, returning your speaker to its original power handling and clarity.

• Specifically designed for DS18 Project 360 series 6.5-inch loudspeakers
• Restores factory performance and acoustic response
• Includes pre-assembled cone, voice coil, spider, and surround for streamlined installation
• Cost-effective alternative to full speaker replacement
• Maintains original power handling and sensitivity ratings

Engineered for high-SPL (Sound Pressure Level) environments, the DS18 6.5-inch mid-high loudspeaker delivers extreme vocal clarity and top-tier efficiency. With a class-leading 100.5dB sensitivity rating, this driver produces massive output with minimal power, making it an essential component for pro-audio style car systems and competition builds. It covers a broad frequency spectrum from 100Hz to 17kHz, ensuring your mid-range and high-frequency audio remains crisp and articulate.

This loudspeaker features an innovative rotating recone system, designed to simplify maintenance and field repairs while allowing for precise component alignment during installation. Built to withstand the rigors of high-output use, it provides a reliable solution for bridging the gap between mid-bass drivers and dedicated high-frequency tweeters.

• Size: 6.5 inches
• Sensitivity: 100.5dB
• Impedance: 4-Ohm
• Frequency Response: 100Hz - 17kHz
• Design: High-sensitivity mid-high driver
• Serviceability: Integrated rotating recone system

DS18 high-sensitivity mid-high loudspeakers are engineered for high-output audio environments where clarity and efficiency are critical. These 6.5-inch drivers bridge the gap between traditional midrange and high-frequency speakers, covering a wide 95Hz to 17kHz range. The unique rotating recone design provides added flexibility for terminal alignment and simplified servicing in custom enclosures.

• Driver Size: 6.5 inches
• Sensitivity: 98dB for maximum output efficiency
• Impedance: 4-Ohm
• Frequency Response: 95Hz - 17kHz
• Design: High-sensitivity mid-high reproduction
• Special Feature: Rotating recone kit compatibility

The DS18 6.5-inch mid-range loudspeaker delivers high-output audio performance in a compact, shallow-mount package. Engineered for applications where mounting depth is limited, this speaker provides clear and punchy mid-frequency response without requiring extensive modifications to door panels or custom enclosures. The water-resistant cone makes it a durable choice for marine applications, motorcycles, or off-road vehicles where exposure to moisture is a constant factor.

With a power handling of 200 Watts RMS and a 4-ohm impedance, this driver is built to handle significant amplification while maintaining acoustic clarity. The shallow design is specifically intended for enthusiasts who need professional-grade sound reinforcement in tight spaces where traditional high-output mid-ranges would be too deep to fit.

• Diameter: 6.5 inches
• Power Handling: 200 Watts RMS
• Impedance: 4 Ohms
• Mounting Depth: Shallow profile for restricted spaces
• Cone: Water-resistant treated material
• Type: Mid-range loudspeaker

The DS18 6x9-inch shallow mid-range loudspeaker delivers high-output audio performance in applications where mounting depth is limited. Engineered for clear, authoritative mid-range response, this driver is the ideal solution for door panels, rear decks, or custom enclosures with restrictive clearances.

Built to handle 175 Watts RMS, this speaker features a 2-ohm impedance to maximize power draw from compatible amplifiers. The included low-profile grill provides essential protection for the cone and internal components without compromising the speaker's slim footprint or acoustic transparency.

• Part Type: Shallow Mid-Range Loudspeaker
• Dimensions: 6x9-inch
• Power Handling: 175 Watts RMS
• Impedance: 2-Ohm
• Design: Shallow-mount profile for tight installations
• Included Hardware: Protective speaker grill

This high-output audio combination pairs the DS18 PRO-GM 6.5-inch mid-range loudspeakers with 3.8-inch super bullet tweeters to deliver a balanced, pro-audio sound stage. The PRO-GM series is engineered for high-sensitivity mid-range performance, while the bullet tweeters provide the sharp, directional high-frequency response needed to cut through ambient noise in high-volume environments.

• Brand: DS18
• Series: PRO-GM
• Mid-Range Diameter: 6.5 inches
• Mid-Range Power Handling: 140 Watts
• Tweeter Type: 3.8-inch Super Bullet
• Tweeter Power Handling: 120 Watts
• Configuration: Speaker and Tweeter Pair

The DS18 8-inch shallow mid-range loudspeaker is engineered for high-output audio systems where mounting depth is a critical constraint. By utilizing a high-strength neodymium magnet, this speaker provides superior motor force and sensitivity while maintaining a slim profile and significantly reduced weight compared to traditional ferrite drivers.

With a power rating of 200W RMS and a 4-ohm impedance, this loudspeaker delivers precise tonal clarity and the volume necessary to cut through ambient noise in custom automotive or marine installations. Its shallow design makes it a versatile solution for door panels and custom enclosures where interior clearance is limited.

• Speaker Type: Mid-Range Loudspeaker
• Diameter: 8 inches
• Power Handling: 200 Watts RMS
• Nominal Impedance: 4 Ohms
• Magnet Material: Neodymium
• Design: Shallow Mount

The DS18 PRO Audio Speaker System provides a high-output solution for listeners seeking professional-grade sound in a mobile environment. This system combines 6.5-inch and 6x9-inch drivers, both featuring integrated bullet tweeters designed to deliver extreme clarity and volume. Unlike standard coaxial speakers, these PRO-style drivers utilize bullet resonators to project high frequencies more efficiently, ensuring your music cuts through road noise and high-decibel bass.

Built for durability and performance, these speakers are engineered to handle the demands of high-SPL (Sound Pressure Level) applications. Whether you are upgrading factory locations or installing them in custom door pods, the DS18 PRO series offers the efficiency needed to produce massive sound without sacrificing the sharp detail provided by the built-in bullet tweeters.

• System includes 6.5-inch and 6x9-inch PRO audio drivers
• Integrated built-in bullet tweeters for enhanced high-frequency projection
• Designed for high-output audio systems and SPL builds
• Engineered for professional-grade clarity and extreme volume

Upgrade your factory audio system with the DS18 6.5" PRO Midrange Coaxial Speaker Kit, designed for high-sensitivity output and improved vocal clarity. This kit replaces underwhelming OE speakers with professional-grade midrange drivers that integrate a coaxial tweeter, providing a full-range sound stage without the need for custom fabrication. The included amplifier ensures the speakers receive consistent, clean power for maximum headroom, while the OEM adapters allow for a direct fit into factory mounting locations.

• 6.5" PRO Midrange Drivers: High-output coaxial design for superior mid-to-high frequency reproduction.
• Integrated Power: Includes a dedicated amplifier matched to the power requirements of the PRO series drivers.
• Direct Fitment: Comes with OEM-style adapter brackets to simplify installation in factory speaker apertures.
• Technical Design: Engineered for high-volume environments where standard speakers distort.

Upgrade your factory audio system with the DS18 PRO Audio 6.5-inch speaker kit, a comprehensive solution designed to deliver high-output sound and increased clarity. This package eliminates the guesswork of matching components by pairing high-performance speakers with a dedicated amplifier for consistent power delivery across the frequency range.

• DS18 PRO Audio 6.5-inch high-performance speakers
• Compact amplifier designed for efficient power output and minimal heat
• OEM speaker adapters to ensure a clean, bolt-on installation in factory locations
• Complete wiring kit with necessary power, ground, and signal cables

The included vehicle-specific OEM adapters allow for a direct replacement of stock speakers without permanent modifications to the door panels or interior. Whether you are looking to increase volume or improve tonal balance, this all-in-one kit provides a professional-grade audio foundation for your vehicle's interior.

This DS18 4-channel amplifier delivers high-output performance in a compact, highly efficient Class-D design. Engineered for full-range audio clarity, it provides a consistent 250W RMS per channel at 4 ohms, making it a powerful solution for driving high-end component sets, mid-range speakers, or full-range arrays while minimizing heat soak and power draw.

• Power Output: 4 x 250W RMS at 4-ohm for high-fidelity stereo sound.
• Class-D Circuitry: Offers superior thermal management and electrical efficiency in a space-saving footprint.
• Full-Range Capability: Designed to handle the entire frequency spectrum for maximum system versatility.
• Configuration: 4-channel stereo output allows for multiple speaker configurations.
• Finish: Durable red coating for a custom look in any installation.

The DS18 dual 12-inch shallow down-firing ported enclosure is engineered to deliver hard-hitting bass in vehicles where floor space is limited. Designed specifically for underseat applications, this enclosure utilizes a down-firing configuration that protects your subwoofers while using the cabin floor to increase acoustic loading for deeper low-frequency response.

• Fits two 12-inch shallow-mount subwoofers
• Down-firing design provides mechanical protection and optimizes bass output
• Ported enclosure tuning for increased efficiency and output compared to sealed boxes
• Durable black spray paint finish resists wear and blends into vehicle interiors
• Low-profile footprint designed for underseat installation in trucks and SUVs

Fits Can-Am Maverick X3 models.

The Rugged Radios Complete Communication Kit brings professional-grade audio and long-range connectivity to your side-by-side. This system integrates the STX Stereo Intercom and the G1 GMRS 2-Way Radio into a seamless package engineered specifically for the Can-Am Maverick X3 cockpit. By utilizing a remote head configuration, this kit allows for a low-profile, clean installation that keeps the primary radio components protected while placing controls within easy reach.

The STX Stereo Intercom provides high-fidelity driver-to-passenger communication with integrated Bluetooth for wireless music streaming and mobile phone pairing. When it's time to talk to the rest of the pack, the G1 GMRS radio provides powerful car-to-car transmission to keep your group connected across miles of terrain.

• STX Stereo Intercom with Bluetooth connectivity for music and calls
• G1 GMRS 2-Way Radio for reliable car-to-car communication
• Remote Head interface for a clean, space-saving dashboard install
• Vehicle-specific Can-Am Maverick X3 mounting hardware
• Designed for high-vibration off-road environments

This Rugged Radios Competition Communication Kit provides a professional-grade audio solution for the Can-Am Maverick X3. Designed for both race-day performance and recreational trail riding, this system facilitates crystal-clear communication between driver and passenger while maintaining long-range connectivity to other vehicles on the trail.

The heart of the kit is the RRP696 PLUS Intercom, which features high-fidelity Bluetooth for wireless music streaming and cell phone integration. It is paired with the M1 VHF Business Band 2-Way Radio, offering reliable car-to-car transmission in the digital or analog spectrum. The included vehicle-specific dash mount ensures a clean, secure installation that integrates seamlessly with the Maverick X3 factory interior.

• RRP696 PLUS Bluetooth Intercom for in-cab communication and mobile device pairing
• M1 Digital/Analog VHF Business Band 2-Way Radio for long-distance car-to-car range
• Vehicle-specific dash mount designed exclusively for Can-Am Maverick X3 models
• High-output audio for clear voice transmission over engine and wind noise
• Complete installation hardware included for a professional finish

This comprehensive communication system is engineered specifically for the Can-Am Maverick X3, providing a professional-grade solution for both in-cab conversation and vehicle-to-vehicle coordination. The kit centers on the 696 PLUS Bluetooth Intercom and the G1 GMRS 2-way radio, ensuring clear audio even in high-noise off-road environments.

The 696 PLUS Intercom features built-in Bluetooth for wireless music streaming and hands-free phone calls, while the high-fidelity G1 GMRS radio provides reliable long-range communication with other trail users. This system replaces bulky handheld units with a streamlined, hard-mounted setup that utilizes a vehicle-specific top-mount bracket for a factory-finished look on your X3 dashboard.

• Fitment: Specifically designed for Can-Am Maverick X3 models
• Intercom: 696 PLUS Bluetooth Intercom with VOX (Voice Activated) control
• Radio: G1 GMRS 2-way radio for vehicle-to-vehicle communication
• Mount: Top Mount bracket for secure, accessible placement
• Audio Features: High-output amplifier and auto-music dimming during transmission
• System Type: Complete Communication (Comp Comm) Kit

Fits Can-Am Maverick X3 models.

Equip your UTV for clear communication and in-car entertainment with this Rugged Radios Complete Communication Kit. Engineered specifically for the Can-Am Maverick X3, this kit combines driver-to-passenger intercom capabilities with a powerful GMRS two-way radio for vehicle-to-vehicle contact. The included vehicle-specific dash mount provides a secure, factory-style fitment that keeps your controls within easy reach without cluttering the cockpit.

• 696 PLUS Bluetooth Intercom: Features high-fidelity music streaming and the ability to answer phone calls or listen to GPS prompts via Bluetooth.
• G1 GMRS 2-Way Radio: Delivers reliable long-range communication on standard GMRS channels.
• Maverick X3 Dash Mount: Precision-fit mounting bracket designed for a seamless installation in the factory dash.
• Comp Comm Setup: Includes the necessary cabling and hardware to integrate your headsets or helmet kits (sold separately).
• MPN: 696-PLUS-G1-X3-D

The Rugged Radios GMR2 PLUS Adventure Pack provides a complete communication solution for off-roaders, overlanders, and outdoor enthusiasts. This bundle centers on the GMR2 PLUS handheld, a versatile unit designed to operate on both GMRS and FRS frequencies. This ensures seamless compatibility with most standard walkie-talkies and high-powered vehicle-mounted GMRS systems.

Built for the rigors of the trail, these radios offer clear, reliable short-to-medium range communication for spotting on technical obstacles, coordinating convoys, or maintaining contact around camp. The Adventure Pack includes the essential charging and portability accessories required for extended field use without the need for additional individual components.

• Dual-band GMRS and FRS frequency operation for maximum compatibility
• Ruggedized handheld housing engineered for outdoor environments
• High-contrast display for visibility in various lighting conditions
• Simple channel scanning and frequency selection interface
• Includes essential Adventure Pack accessories for charging and mounting

The Rugged Radios Rambler G4 GMRS Mobile Radio Kit Lite provides a high-performance communication solution for off-roaders and outdoor enthusiasts who need reliable range without a bulky setup. This kit centers on the Rambler G4, a versatile GMRS mobile radio designed to deliver clear voice transmission across rugged terrain.

Equipped with a low-profile Stealth Antenna, this system ensures consistent signal strength while maintaining a clean, snag-free vehicle profile. The compact footprint of the Rambler G4 allows for flexible mounting in tight cabs, making it an ideal choice for UTVs, overland rigs, and support vehicles. Whether you are coordinating a trail ride or communicating with a base camp, this GMRS kit provides the power and clarity required for critical off-road environments.

• Compact Rambler G4 GMRS mobile radio unit
• Low-profile Stealth Antenna for unobtrusive installation
• GMRS frequency compatibility for long-range communication
• High-contrast display for visibility in various lighting conditions
• Simplified wiring and mounting for a quick installation process

The Rugged Radios Rambler G4 GMRS Mobile Radio provides dependable long-range communication for off-road vehicles and overland rigs. As a high-performance GMRS (General Mobile Radio Service) unit, the Rambler G4 delivers superior signal clarity and significantly more range than traditional CB radios, making it an essential tool for trail group coordination and safety.

This package features the Rugged Radios Stealth Antenna, specifically designed for low-profile mounting. This compact antenna solution allows for installation in tight spaces or on rooflines where a full-sized whip might be prone to damage from low-hanging branches or garage clearances. The Rambler G4's robust chassis is built to handle the constant vibration of off-road use, ensuring your communication link remains stable in harsh environments.

• High-power GMRS band mobile radio for clear, long-distance communication
• Rugged Radios Rambler G4 series chassis designed for vehicle mounting
• Includes a low-profile Stealth Antenna to prevent damage from obstacles
• Large, easy-to-read display for channel and status monitoring
• Ideal for UTVs, Jeeps, trucks, and adventure vehicles

The Rugged Radios R1 is a professional-grade handheld two-way radio designed to bridge the gap between legacy systems and modern communication technology. Engineered for clear, reliable transmission in demanding environments like pit rows, off-road trails, and job sites, this handheld unit features dual-mode operation for both digital and analog signals.

• Dual-mode functionality allows for seamless communication across both Digital and Analog channels.
• Operates on Business Band frequencies for high-performance range and clarity.
• Ergonomic handheld design with a high-visibility blue finish for easy identification.
• Compatible with a wide range of business band systems and existing analog networks.
• Built for durability to withstand the vibrations and dust typical of automotive and off-road use.

Whether you are managing a race team or coordinating a group on the trail, the R1 provides the flexibility needed to stay connected. The digital mode offers enhanced audio quality and privacy, while analog support ensures you can still communicate with older radio units in your fleet.

The Rugged Radios Nitro Bee Xtreme is a purpose-built UHF race receiver designed for drivers and pit crews to monitor race officials, track safety alerts, and internal team communications. Engineered to meet the demands of professional motorsport, this compact receiver ensures clear audio delivery in high-noise environments, keeping you informed of track conditions and official directives in real-time.

• UHF frequency reception for official trackside communications
• Compact, lightweight design for easy mounting or driver-wear
• High-clarity audio output compatible with racing headsets and earbuds
• Durable housing built to withstand the heat and vibration of a race cockpit

Whether used for monitoring the race director during a sanctioned event or coordinating with your crew, the Nitro Bee Xtreme provides the reliable audio feed necessary for safety and competitive strategy on the track.

Fits 2020-2024 Can-Am Maverick R and Maverick R Ultimate models.

The Rugged Radios Complete Communication Kit provides a professional-grade audio solution for in-cab and vehicle-to-vehicle clarity. This system combines a high-performance Bluetooth intercom with a powerful 2-way radio, allowing driver and passenger to communicate without shouting while maintaining long-range contact with other vehicles on the trail. Designed specifically for the Maverick R platform, this kit ensures a clean, integrated look with components engineered to withstand the dust, vibration, and moisture of off-road environments.

• Bluetooth-enabled intercom for wireless music streaming and hands-free mobile calling
• High-output 2-way radio for reliable long-distance communication with other rigs
• Vehicle-specific mounting brackets for a seamless fit in the Can-Am Maverick R dash
• Ruggedized cabling and push-to-talk (PTT) buttons for dependable operation
• Intercom functionality isolates voice from engine and wind noise for crystal-clear audio

The Rugged Radios H41 Behind-the-Head (BTH) headset is engineered for reliable communication in demanding, high-noise environments. This headset combines a professional carbon fiber finish with a functional design tailored for off-road racing, pit crews, and industrial applications.

The BTH configuration utilizes a stainless steel headband that rests behind the neck, allowing the user to wear the headset comfortably with most helmets or hats. A secure fit is maintained via an adjustable overhead velcro strap, ensuring the ear cups remain properly sealed for maximum noise attenuation and clear audio monitoring.

• Manufacturer Part Number: H41
• Design Style: Behind-the-Head (BTH)
• Finish: Carbon Fiber
• Compatibility: Engineered for use with 2-way radio systems
• Construction: Stainless steel headband with adjustable crown strap

The Rugged Radios GMR2 PLUS is a versatile GMRS and FRS two-way handheld radio designed for clear communication in the field. Whether you are navigating a technical trail or coordinating at a campsite, this grey handheld unit provides the portability and frequency range needed for effective team coordination. It bridges the gap between GMRS and FRS channels, ensuring compatibility with a wide range of standard two-way radios used by off-roaders and outdoor enthusiasts.

• GMRS and FRS frequency compatibility for versatile communication
• Compact handheld design ideal for spotting and recovery tasks
• Tactile controls for easy operation in demanding environments
• Durable chassis finished in Grey
• High-contrast display for clear visibility in varying light conditions