This Walbro universal bulk fuel pump is engineered to provide the consistent fuel pressure and flow required for high-demand EFI systems. Known throughout the industry for their reliability in both street and performance applications, Walbro pumps are a proven solution for custom fueling setups, EFI conversions, and high-flow replacements.

• Provides reliable, consistent fuel delivery for EFI systems
• Durable internal construction designed for long service life under high pressure
• Universal design suitable for custom fuel tank builds and performance applications
• Bulk packaging identifies the pump-only unit (installation kit/strainer not included)

Fits select 1982-1998 Chevrolet trucks and vans, and 1982-1995 Chevrolet, Pontiac, and Oldsmobile passenger vehicles.

This Walbro fuel pump installation kit is designed to replace a worn or failing factory unit with a reliable, high-performance fuel delivery solution. As a trusted Tier 1 OE supplier, Walbro pumps are engineered to maintain consistent fuel pressure and flow, ensuring your engine receives the precise volume of fuel required for optimal drivability and performance. Replacing an aging pump helps eliminate common fuel system issues such as hard starting, hesitation under load, and lean-run conditions.

This comprehensive kit includes the essential components required for a clean installation into the factory fuel tank assembly. Each pump is manufactured to tight tolerances to ensure long-term durability in various fuel grades, providing a significant upgrade over standard aftermarket replacements.

• Direct-fit replacement for original equipment in-tank fuel pumps
• Designed for GM TBI and early fuel injection applications
• Includes high-quality fuel strainer (filter sock) for contaminant protection
• Complete with wiring pigtail, submersible hose, and mounting hardware where required
• Precision-engineered for quiet operation and consistent flow rates

Ensure your high-performance engine receives the fuel volume it demands with the Walbro TIA485-2. This 450LPH in-tank fuel pump is engineered by TI Automotive to meet the high-pressure requirements of forced induction and high-horsepower naturally aspirated builds. Its E85-compatible internal construction features a dual-channel turbine design for enhanced efficiency and quieter operation compared to older high-flow pump technologies.

As a universal component, this pump provides a reliable fueling solution for custom street and racing applications. The included installation kit provides the essential hardware to retrofit the pump into your factory or custom fuel tank assembly, ensuring a secure mount and proper electrical connection.

• Manufacturer Part Number: TIA485-2
• Flow Rate: 450LPH at 40 psi / 13.5V
• Fuel Compatibility: E85, Flex Fuel, and Gasoline
• Design: In-tank, dual-channel turbine
• Included Components: Fuel pump, filter sock, wiring harness, and installation hardware

Fits 1999-2005 Mazda Miata (Base, LS, SE, 10th Anniversary, and Mazdaspeed).

The Walbro 400-1092 installation kit is a vehicle-specific hardware set designed to integrate high-performance TI Automotive fuel pumps into the factory fuel tank module. This kit provides the secure fitment and reliable connections required for high-pressure, high-flow fuel systems in race-proven and street-performance engines. This is a direct-fit replacement hardware kit engineered to replace worn OE mounting components during a pump upgrade.

• Manufacturer Part Number: 400-1092
• Designed for use with TI Automotive F20000313G3 and GSS342G3 fuel pumps
• Includes all necessary installation components (filter strainer, hose, clamps, and wiring connector)
• Engineered for high-flow EFI systems
• Note: Fuel pump is not included and must be purchased separately

The Walbro F90000295 is a high-performance universal in-tank fuel pump designed for high-output engines requiring significant fuel volume. Engineered by TI Automotive, this 535 LPH pump utilizes the award-winning 39/50 turbine architecture to deliver high-pressure, high-flow performance for engines exceeding 500hp. This E85-compatible version is built to withstand the unique demands of ethanol while maintaining superior hot-fuel performance.

As a genuine TI Automotive product, the F90000295 is UAW-manufactured at the Caro, Michigan facility. This ensures consistent tolerances and reliability through a vertically integrated assembly process that avoids third-party sourcing. The DCSS (Dual Channel Single Stage) design provides the efficiency and flow rates necessary for forced induction and high-compression naturally aspirated builds.

• Manufacturer Part Number: F90000295
• Flow Rate: 535 LPH
• Fuel Compatibility: E85 and Gasoline
• Application: In-tank, Universal Fit
• Pump Architecture: Dual Channel Single Stage (DCSS)
• Origin: Made in USA (Caro, MI)

Ensure reliable power generation with the Walbro F30000271 In-Line Fuel Pump, specifically engineered for Kohler generator applications. This high-pressure pump maintains the precise delivery required for steady engine performance, helping to eliminate stalling or hard starts caused by fuel delivery issues.

Built for durability in stationary and mobile environments, this 12-volt pump features a compact in-line configuration for straightforward replacement of the factory unit. It delivers a consistent flow rate of 30 LPH at a maximum pressure of 60 PSI, drawing only 4.3 amps under load to provide efficient fueling without taxing your generator's electrical system.

• Manufacturer Part Number: F30000271
• Application: Kohler Generators
• Operating Voltage: 12 Volts
• Maximum Pressure: 60 PSI
• Flow Rate: 30 LPH
• Current Draw: 4.3 Amps
• Design: In-Line Fuel Pump

Ensure the longevity and performance of your fuel system with the Walbro 125-165 Fuel Filter Sock. Designed by TI Automotive as a specialized inlet strainer, this component attaches directly to the fuel pump intake to filter out particulate matter and tank debris before it can enter the pump internals. This prevents abrasive wear and potential clogging, maintaining consistent fuel flow and pressure during operation.

• Genuine TI Automotive (Walbro) component engineered for high-performance applications
• Serves as a critical pre-filter to protect fuel pump internals from damage
• Designed for a secure, direct fit on compatible TI Automotive fuel pumps and modules
• High-flow mesh construction ensures minimal restriction while maximizing filtration
• Manufacturer Part Number: 125-165

The Walbro GSS352G3 is a high-performance, high-pressure fuel pump designed for enthusiasts requiring reliable fuel delivery in applications exceeding 500 horsepower. This GSS line pump provides consistent flow across a wide pressure range, ensuring your engine receives the necessary fueling for high-output demands. Featuring an 11mm inlet that is positioned inline with the outlet, this unit is engineered for specific plumbing configurations and internal tank setups.

• Flow Rate: 350LPH (Liters Per Hour)
• Inlet Configuration: 11mm Inlet (Inline with the Outlet)
• Application Support: Optimized for engines with 500hp+
• Build Quality: UAW manufactured in Caro, Michigan, USA by TI Automotive
• MPN: GSS352G3

Each pump is engineered for superior hot fuel performance and long-term durability. By utilizing technical expertise developed over 60 years, TI Automotive ensures that every Walbro pump provides a direct-fit solution for high-demand fueling systems without the need for third-party manufacturing or outside sourcing.

Ensure consistent, high-pressure fuel delivery with the Walbro GSS250G3 in-tank fuel pump. As a core component of the proven GSS series from TI Automotive, this 190 LPH pump is engineered for performance applications requiring reliable fuel flow across a wide pressure range. It serves as a precision-engineered direct-fit replacement, designed to integrate seamlessly into existing fuel modules while offering superior hot fuel performance.

Every GSS250G3 is manufactured at the TI Automotive facility in Caro, Michigan. By maintaining complete control over the assembly process and utilizing UAW labor, Walbro ensures these pumps meet strict tolerances for longevity and performance. Whether you are replacing a worn OE unit or upgrading for mild performance gains, this high-pressure pump delivers the volume necessary to support your engine's demands.

• Flow Rate: 190 LPH
• Pump Type: In-tank high-pressure fuel pump
• Series: GSS Series (GSS250)
• Manufacturer Part Number: GSS250G3
• Manufacturing: UAW manufactured in Caro, MI, USA
• Performance: Optimized for superior hot fuel handling and consistent pressure delivery

The Walbro F90000274 High Pressure 450 LPH in-tank fuel pump is designed for high-performance forced induction and naturally aspirated engines requiring consistent fuel delivery at elevated pressures. Engineered by TI Automotive at their Caro, Michigan facility, this universal pump provides the necessary flow to support applications exceeding 500 horsepower.

As a high-pressure version of the award-winning TI Automotive 39/50 series, the F90000274 utilizes a turbine-style design that improves hot fuel handling and ensures a quiet, reliable operation compared to traditional gear-driven pumps. This unit is built to strict OE standards to ensure long-term durability and a precise fit in various custom or universal fuel tank modules.

• Manufacturer Part Number: F90000274
• Flow Rate: 450 LPH (Liters Per Hour)
• Configuration: In-tank, high-pressure version
• Application: Universal fitment (supports 500HP+)
• Manufacturing: UAW manufactured in Caro, MI, USA
• Design: Turbine-style internals for improved hot fuel performance

The Walbro F90000262 is a high-performance, universal in-tank fuel pump engineered for gasoline-powered engines demanding high fuel volume at consistent pressure. Built by TI Automotive in their Caro, Michigan plant, this 400LPH pump provides the flow necessary to support applications exceeding 500 horsepower. It features the proven 39/50 design architecture to ensure reliable performance under high-load conditions.

• Manufacturer Part Number: F90000262
• Flow Rate: 400 Liters Per Hour (LPH)
• Application: Universal in-tank mounting
• Fuel Compatibility: Gasoline only (NOT E85 compatible)
• Origin: UAW-made in Caro, Michigan, USA
• Performance: Designed for high-pressure requirements in 500hp+ engines

As an authentic TI Automotive product, this unit is manufactured in-house to ensure first-time fit and long-term durability. It serves as a reliable solution for performance enthusiasts seeking to upgrade their fuel system without switching to ethanol-based fuels. This pump delivers unquestioned fuel flow across a wide pressure range for consistent power delivery.

Fits select 1988-2000 Acura, Eagle, Ford, Honda, Mazda, Mitsubishi, and Nissan models including NSX, Civic, 240SX, and Sentra.

The Walbro GSS Series 190 LPH High Pressure Fuel Pump (GSS278) provides the consistent, high-volume fuel delivery required for performance-oriented engines. Manufactured by TI Automotive, these units are designed as direct-fit replacements for factory in-tank fuel modules, offering a significant upgrade over stock flow rates. Engineered for superior hot fuel performance and reliability, the GSS278 is an industry-standard choice for naturally aspirated and light forced-induction applications.

• Manufacturer Part Number: GSS278
• Flow Rate: 190 Liters Per Hour (LPH)
• Configuration: High-pressure in-tank turbine
• Manufacturing: UAW-manufactured in Caro, Michigan, USA
• Compatibility: Engineered for gasoline applications across various import platforms
• Maintains stable fuel flow across a wide pressure range to support modified power levels

The Walbro GCA756-2 Fuel Pump and Installation Kit Package is an essential upgrade for maintaining reliable fuel delivery. This package combines a high-performance fuel pump with a complete installation hardware set, ensuring a secure and efficient in-tank setup for both repair and performance applications.

Walbro components are engineered for durability and consistent pressure, making this kit a preferred choice for technicians and enthusiasts looking to replace a failing OE pump or support higher fueling demands. The inclusion of the application-specific installation kit reduces the need for sourcing individual connectors or mounting hardware.

• Manufacturer Part Number: GCA756-2
• Components: High-pressure fuel pump and comprehensive installation kit
• Installation: Designed for in-tank mounting
• Build: Robust internal design for long-term service life and consistent flow

Fits select 1992-2001 Honda Civic, Civic del Sol, and Acura Integra models.

The Walbro GCA3313-2 high-pressure 255LPH fuel pump is a necessary upgrade for high-performance naturally aspirated and forced induction builds. Designed to deliver consistent fuel flow and maintain critical pressure levels, this pump prevents lean conditions that can lead to engine damage under heavy load. This complete setup kit provides the essential components for a secure installation into the factory fuel tank assembly.

• Part Number: GCA3313-2
• Flow Rate: 255 Liters Per Hour (LPH)
• Design: In-tank electric high-pressure turbine
• Kit Includes: Fuel pump, filter strainer, wiring harness pigtail, rubber hose, and mounting hardware
• Compatibility: Replaces factory pump in OEM housing

Fits select 1990-1997 Mitsubishi 3000GT and Eclipse, Dodge Stealth, Eagle Talon, and Plymouth Laser models.

The Walbro 400-857 fuel pump installation kit by TI Automotive provides the necessary hardware for a secure, direct-fit replacement in high-pressure, high-flow fuel systems. This application-specific kit is engineered to integrate seamlessly with high-performance pumps, ensuring correct alignment and electrical connection within the factory fuel tank assembly.

Designed for use with TI Automotive GSS315 or F20000312G3 fuel pumps, this kit includes the essential components to restore or upgrade your fuel delivery system without modification to the factory housing. Note: This product includes the installation hardware only; the fuel pump is not included.

• Direct-fit design for application-specific mounting
• Engineered for high-pressure, high-flow EFI systems
• Compatible with TI Automotive GSS315 and F20000312G3 pumps
• Includes filter strainer, electrical harness, and necessary hardware
• Manufacturer Part Number: 400-857

Fits 1989-1995 Mazda RX-7 across all trims including Base, Turbo, Convertible, and R1/R2 performance models.

This Walbro (TI Automotive) 400-854 installation kit provides the essential hardware required to integrate a high-performance fuel pump into your Mazda RX-7's factory fuel tank. Designed as a direct-fit replacement for aged OE components, this kit uses a race-proven design to support high-flow and high-pressure fuel systems, ensuring consistent delivery during spirited driving or track use.

This application-specific kit is engineered for use with TI Automotive GSS341G3 or F20000312G3 fuel pumps. It includes the critical mounting and electrical components needed for a secure install. Please note: this is an installation hardware kit only; the fuel pump itself is sold separately.

• Manufacturer Part Number: 400-854
• Compatibility: Designed for use with TI Automotive GSS341G3 or F20000312G3 pumps
• Design: Direct-fit replacement for factory fuel pump hardware
• Application: High-pressure, high-flow fuel system installations
• Contents: Includes all necessary application-specific installation components

Fits select 1995-2006 Eagle Talon TSi, Mitsubishi Eclipse (GST/GSX/Spyder GST), and Lancer Evolution models. This application-specific installation kit provides the necessary hardware to securely mount a high-performance fuel pump into your factory tank assembly.

Designed by TI Automotive for use with the GSS317 fuel pump, this kit replaces aged or brittle factory components that can lead to fuel leaks or pressure drops. The race-proven design ensures a direct-fit replacement, maintaining fuel system integrity under high-pressure and high-flow demands. Please note that this is an installation accessory kit and does not include the fuel pump itself.

• Manufacturer Part Number: 400-847
• Optimized for TI Automotive High Performance fuel pumps
• Direct-fit replacement for OE mounting configurations
• Includes fuel strainer, wiring pigtail, and necessary installation hardware
• Designed for high-flow EFI applications

Fits 1989-1998 Nissan 240SX (Base, LE, SE, and XE).

This TI Automotive (Walbro) application-specific installation kit provides the essential hardware required to install a high-performance fuel pump into your vehicle's factory tank. Engineered for high-pressure and high-flow demands, this kit ensures a secure, direct-fit replacement for the OE components using race-proven technology. It is designed to simplify the installation process while maintaining the integrity of the fuel system's delivery.

Note: This is an installation kit only; the fuel pump is sold separately.

• Manufacturer Part Number: 400-766
• Optimized for use with TI Automotive GSS341G3 or F20000312G3 fuel pumps
• Direct-fit replacement design for 1989-1998 S13 and S14 chassis
• Includes application-specific filter strainer, wiring pigtail, fuel hose, and clamps
• Race-proven design for high-pressure, high-flow EFI engines

Fits 1994-1998 Toyota Supra Turbo.

The Walbro 400-762 Fuel Pump Installation Kit provides the application-specific hardware required to install TI Automotive high-performance fuel pumps into the factory tank assembly. This direct-fit replacement kit is engineered for high-pressure, high-flow fuel systems, ensuring a secure fit and reliable fuel delivery for race-proven applications.

• Direct-fit replacement design for 1994-1998 Toyota Supra Turbo
• Compatible with TI Automotive GSS341G3 or F20000312G3 fuel pumps
• Manufacturer Part Number: 400-762
• Includes application-specific installation components
• TI Automotive high-performance technology
• Note: Fuel pump is not included and must be purchased separately

This Walbro Fuel Pump & Installation Kit Package (MPN GCA3366-2) fits select 1992-2001 Honda Civic, Odyssey, and Acura Integra models. Designed as a complete solution for restoring or upgrading your fuel delivery system, this kit provides a reliable alternative to the factory pump by utilizing a high-performance Walbro unit alongside the necessary hardware for a secure, drop-in installation.

• Genuine Walbro fuel pump for consistent pressure and flow across all RPM ranges
• Complete installation kit simplifies the swap with compatible filters and wiring components
• Engineered for high reliability in both daily driving and performance applications
• Manufacturer Part Number: GCA3366-2

Vehicle Fitment:

• 1994-2001 Acura Integra (GS, GS-R, LS, RS, Special Edition, Type R)
• 1992-1999 Honda Civic (CX, DX, EX, GX, HX, LX, Si, VX, Value Package)
• 1995-1998 Honda Odyssey (EX, LX)

Ensure a secure and reliable fuel system upgrade with the Walbro (TI Automotive) 400-991 Fuel Pump Installation Kit. This application-specific kit provides the necessary hardware to properly mount a high-performance fuel pump into the factory fuel module, replacing worn OE components with race-proven technology designed for high-pressure and high-flow environments.

Fits 1995-2005 Dodge Neon (including ACR, R/T, and SRT-4) and 2008 Chrysler PT Cruiser Base.

• Specifically engineered for use with the TI Automotive GRJ444 fuel pump
• Includes all essential installation components for a direct-fit replacement
• Designed to maintain pump stability and filtration integrity in high-performance applications
• Genuine TI Automotive/Walbro component (Manufacturer Part Number: 400-991)
• Note: Installation kit only; fuel pump is not included

The Walbro GSS351G3 is a high-performance, in-tank fuel pump engineered to support engines exceeding 500hp. As part of the GSS product line by TI Automotive, this pump delivers consistent, high-pressure fuel flow for demanding applications while maintaining the reliability of an OE-style component. This specific model features an 11mm inlet positioned 180 degrees from the outlet for specific fuel tank and hanger configurations.

• Flow Rate: 350LPH
• Inlet Diameter: 11mm
• Configuration: 180-degree offset from outlet
• Application: High-pressure performance fuel systems
• Manufacturer Part Number: GSS351G3
• Construction: UAW manufactured in Caro, Michigan, USA

Designed for professional-grade performance, this pump provides the flow necessary to sustain high horsepower levels across a wide pressure range. It is an ideal replacement or upgrade for enthusiasts requiring a dependable fuel delivery solution that doesn't sacrifice hot fuel performance.

The Walbro (TI Automotive) TF0001604 fuel hose is a specialized component engineered to support high-performance fuel pump and module installations. With a 236mm length and an 8mm internal diameter (ID), this hose provides a robust plumbing solution for fuel systems requiring precise routing and reliable fluid transfer.

As an authentic TI Automotive accessory, this hose is designed to withstand the chemical demands of modern fuels while maintaining structural integrity within the fuel tank environment. It is an essential component for custom fuel system builds or when replacing worn lines during a pump upgrade to ensure a leak-free, high-pressure connection.

• Genuine TI Automotive / Walbro installation accessory
• Manufacturer Part Number: TF0001604
• Internal Diameter: 8mm
• Total Length: 236mm
• Compatible with Walbro high-performance fuel pumps and modules
• Designed for durability in specialized or custom fuel system configurations

The Walbro TCA948-4 is a high-performance universal dual fuel pump assembly engineered for high-horsepower applications that demand maximum fuel volume. Designed specifically to handle the corrosive nature of E85 and ethanol-blended fuels, this assembly utilizes two high-pressure turbine pumps to ensure consistent delivery under extreme loads.

• Flow Rate: Dual 450 LPH (Liters Per Hour) configurations for massive fuel volume.
• Compatibility: Fully compatible with E85, ethanol, and standard gasoline.
• Installation: Universal in-tank design intended for custom fuel system builds and high-flow hangers.
• Technology: Proven turbine-style architecture provides quiet operation and superior durability compared to older plunger-style pumps.
• MPN: TCA948-4

This dual-pump setup is the industry standard for forced induction and high-displacement builds requiring reliable fuel pressure. Note that custom wiring, heavy-duty relays, and upgraded fuel lines are required to support the increased amperage draw and flow capacity of this dual-pump system.

The Walbro GSS350G3 by TI Automotive is a high-pressure, high-flow in-tank fuel pump engineered for performance engines exceeding 500 horsepower. This pump delivers consistent fuel flow across a wide pressure range, specifically optimized to maintain superior hot fuel performance and prevent delivery drop-off during demanding conditions.

As a direct successor to the established GSS series, the GSS350G3 features a 22mm center inlet configuration for specific tank and hanger orientations. Every unit is UAW manufactured at TI Automotive’s facility in Caro, Michigan, ensuring the pump is built and tested by the original manufacturer rather than being sourced from third-party suppliers.

• Manufacturer Part Number: GSS350G3
• Flow Rate: 350 LPH
• Inlet Specification: 22mm Center Inlet
• Pump Type: In-tank high pressure
• Construction: Made in USA at TI Automotive Caro, MI plant
• Compatibility: Suitable for gasoline and high-pressure fuel systems

Fits select 1985-1998 GM cars and trucks.

Ensure your engine receives consistent fuel delivery with the Walbro GSS343G3 255LPH High Pressure Fuel Pump. This in-tank electric fuel pump is a proven industry standard for performance enthusiasts, designed to support high-horsepower naturally aspirated engines and forced induction applications. By delivering a steady 255 liters per hour, this unit solves fuel starvation issues commonly encountered when modifying factory GM fuel systems.

Constructed with a robust internal design, the GSS343G3 maintains high-pressure performance even under demanding conditions. It serves as a direct-fit style upgrade for many 1985 to 1998 GM vehicle applications, replacing the lower-flow factory pump to provide the headroom needed for increased power levels.

• Flow Rate: 255 Liters Per Hour (LPH)
• Design: In-tank high-pressure electric turbine
• Manufacturer Part Number: GSS343G3
• Fitment: 1985-1998 GM passenger cars and light trucks
• Application: Supports performance N/A, turbo, and supercharged builds

The Walbro GSS342G3 is a high-pressure, in-tank fuel pump from TI Automotive’s proven GSS line. Designed for high-performance applications, this 255LPH pump delivers consistent fuel flow across a wide pressure range, providing the volume necessary to support engines producing over 500hp. Engineered for superior hot fuel performance, it ensures your fuel system maintains critical pressure even under demanding thermal conditions.

• Flow Rate: 255LPH (Liters Per Hour)
• Application: In-tank high-pressure fuel system
• Horsepower Support: Capable of supporting 500hp+ setups
• Series: Walbro GSS Line
• Manufacturer Part Number: GSS342G3
• Manufacturing: UAW manufactured in Caro, Michigan, USA

With over 60 years of heritage, TI Automotive produces every Walbro pump in-house to ensure a precise first-time fit and long-term reliability. The GSS342G3 serves as a robust direct-fit replacement for builders requiring unquestioned flow for high-output fueling needs.

The Walbro GSS341G3 is a high-performance in-tank fuel pump designed to provide the consistent, high-pressure fuel flow required for demanding forced induction and naturally aspirated applications. As part of the proven GSS line from TI Automotive, this 255 LPH pump is engineered to support engines producing upwards of 500hp while maintaining superior performance in hot fuel conditions.

Manufactured by UAW workers at the TI Automotive plant in Caro, Michigan, these pumps are built to exacting standards. The GSS341G3 is a reliable choice for enthusiasts looking for a direct-fit solution that delivers unquestioned fuel flow across a wide pressure range.

• Manufacturer Part Number: GSS341G3
• Flow Rate: 255 Liters Per Hour (LPH)
• Design: GSS Series High-Pressure In-Tank
• Power Support: Capable of supporting 500hp+ applications
• Manufacturing: UAW manufactured in Caro, MI, USA
• Series: Genuine Walbro GSS Line

The Walbro GSS340G3 is a high-output, in-tank electric fuel pump designed for high-performance EFI applications. Manufactured by TI Automotive in their Caro, Michigan facility, this genuine 255 LPH pump provides consistent fuel delivery and superior hot fuel performance for engines producing over 500hp. As a staple in the performance industry, the GSS series is known for its reliability and ability to maintain high-pressure flow even in demanding conditions.

• Flow Rate: 255 Liters Per Hour (LPH)
• Application: High-pressure in-tank fuel systems
• Manufacturing: UAW manufactured in Caro, MI USA by TI Automotive
• Horsepower Support: Designed for engines exceeding 500hp
• Part Number: GSS340G3

Each pump is engineered as a direct-fit replacement for many performance applications, ensuring a legacy of reliability and first-time fit. This unit is manufactured entirely in-house by TI Automotive to maintain strict quality control standards, never sourced from third-party manufacturers.

Fits select 1986-2000 Acura NSX, Ford Probe, Mazda MX-6/RX-7, and Toyota MR2/Supra models.

The Walbro GSS315G3 high-pressure fuel pump is a proven industry standard for high-performance EFI systems. Delivering 255 liters per hour (LPH), this in-tank pump provides the consistent fuel volume required for turbocharged, supercharged, and modified naturally aspirated engines. By replacing the restrictive factory pump, the GSS315G3 ensures your fuel rail stays pressurized under high load, preventing lean conditions that can lead to engine damage.

• Flow Rate: 255 Liters Per Hour (LPH)
• Pressure Rating: High Pressure
• Design: Internal In-tank Electric Fuel Pump
• Manufacturer Part Number: GSS315G3
• Includes: Pump unit (installation kits sold separately based on application)

Whether you are restoring a classic 1980s Toyota Supra or maximizing the performance of a late-model Acura NSX, this pump offers the reliability and flow capacity needed for demanding street and track applications.