Rubber is out, silicone is in! Upgrade your Corvette radiator hoses with the Mishimoto 2005-2008 Chevrolet Corvette radiator hose kit and provide your 'Vette with an advancement in both style and reliability. This kit includes both upper and lower Corvette radiator hoses, as well as four worm-gear clamps for ease of installation. Unlike the degradation-prone stock rubber Corvette radiator hoses, every Mishimoto silicone Corvette radiator hose kit is constructed from five layers of silicone with heat-resistant embedded fibers to provide unmatched durability, heat tolerance, and pressure tolerance. Whether you are taking your C6 Corvette to the drag strip or lapping at your next track day, trust Mishimoto with all your Corvette parts. These C6 Corvette radiator hoses are available in black, blue, or red and, like all our C6 Corvette parts, includes the Mishimoto Lifetime Warranty.

• Constructed from five layers of silicone with heat-resistant embedded fibers
• Includes upper and lower radiator hoses
• Improves heat and pressure tolerance

This Part Fits:

This pre-assembled 36-inch PTFE hose from Vibrant Performance provides a professional, high-pressure solution for plumbing fuel, oil, or cooling systems. The PTFE (Polytetrafluoroethylene) inner liner is engineered for maximum chemical resistance, making it compatible with nearly all automotive fluids including E85, methanol, and aggressive additives that can degrade standard rubber lines. Unlike traditional synthetic rubber, PTFE is non-permeable, which eliminates the fuel-vapor smell often found in performance fuel systems.

• Hose Length: 36 inches
• Liner Material: PTFE (Polytetrafluoroethylene) for chemical and thermal stability
• Fitting Size: -8AN Female Swivel
• Fitting Configuration: One Straight end and one 90 Degree end
• Compatibility: Suitable for fuel (E85/Gasoline/Diesel), oil, coolant, and methanol

Each assembly is factory-built to ensure a secure, leak-free connection. The -8AN female fittings feature a swivel design for easy orientation during installation, and the 90-degree end allows for clean routing in tight engine compartments or around chassis components.

Vibrant Performance Pre-Assembled PTFE Hose Assemblies provide a professional-grade plumbing solution for high-performance automotive fluid systems. Each line is constructed with a chemically resistant PTFE liner, making it compatible with a wide range of fluids including fuel, oil, nitrous, and coolant. Unlike field-assembled lines, these feature crimp-on fittings installed using a hydraulic tool for a permanent, leak-free connection.

To ensure maximum reliability, every assembly is factory pressure tested to its full rated working pressure. The ends are fitted with black anodized aluminum hose ends for superior corrosion resistance and a clean finish. These assemblies are designed for low-to-medium pressure applications; do not use them in high-pressure hydraulic systems.

• Length: 12 inches
• Fitting Size: -6AN Female
• Fitting Angles: Straight to 45 Degree
• Material: PTFE-lined hose with black anodized aluminum fittings
• Construction: Hydraulically crimped for a permanent seal
• Validation: Factory pressure tested

Vibrant Performance Polyester Reinforced Silicone Heater Hoses provide a durable and flexible plumbing solution for high-temperature cooling systems. This 5/16" (8mm) ID hose is engineered for extreme reliability, featuring a multi-ply polyester reinforcement that allows it to maintain flexibility and structural integrity under pressure. Unlike standard rubber hoses that dry rot and crack over time, this silicone construction is built to withstand harsh engine bay conditions.

• Inside Diameter: 5/16" (8mm)
• Length: 20 ft. roll
• Material: High-grade silicone with polyester reinforcement
• Operating Temperature: -58°F to 392°F (-50°C to 200°C)
• Compliance: Exceeds SAE J20R3 requirements
• Finish: Black
• Note: Suitable for coolant and water service; not for use with fuel or oil.

Vibrant Performance reinforced silicone heater hoses are engineered for high-temperature cooling system plumbing where standard rubber hoses fail. This 1/4-inch (6mm) I.D. hose features polyester reinforcement for superior pressure resistance while maintaining the flexibility needed for tight engine bay routing.

• I.D.: 1/4" (6mm)
• Length: 20 ft.
• Material: Polyester reinforced silicone
• Finish: Black
• Temperature Range: -58°F to 392°F (-50°C to 200°C)
• Certification: Exceeds SAE J20R3 requirements
• Compatibility: Designed for water and coolant service; not suitable for fuel or oil applications

Fits select 2002-2007 Subaru WRX and 2004-2011 Subaru WRX STI.

This PERRIN replacement nylon coupler is engineered to restore the secure connection between your turbocharger and a 2.4-inch turbo inlet hose. Manufactured from high-strength, heat-resistant nylon, this component is a direct replacement for the fitting included in PERRIN inlet kits, ensuring a tight seal against vacuum leaks that can compromise engine performance. It is an essential service part for maintaining the integrity of your intake system if your original coupler has become brittle or damaged due to heat cycles.

• Designed specifically for PERRIN 2.4-inch (60mm) turbo inlet hoses
• High-strength nylon construction for durability and heat resistance
• Precision-molded for a leak-free fit to the turbocharger
• Direct replacement for worn or damaged inlet hose couplers

Maintain a secure, leak-free seal on your induction system with the PERRIN Performance Inlet Hose Hardware Kit. This specific hardware set is designed for use with PERRIN part number PSP-INT-421, providing the necessary components to properly install or refresh your turbo inlet hose. Ensuring a tight connection at the turbocharger inlet is critical for preventing vacuum leaks and unmetered air from entering the engine, which can lead to lean conditions and poor performance.

Fits 2008-2014 Subaru WRX, 2004-2013 Subaru Forester XT, and 2005-2009 Subaru Legacy GT.

• Designed specifically for use with PERRIN Turbo Inlet Hose PSP-INT-421
• Includes essential hardware for secure mounting and sealing
• Replaces lost or worn installation components for a factory-level fit
• Engineered to withstand the high-heat environment of the turbocharger area

Fragola PTFE hose is engineered to solve the common issues of fuel permeation and line degradation found in modern performance plumbing. Featuring a smooth-bore PTFE core, this hose is fully compatible with aggressive fluids including E85, ethanol, methanol, pump gas, and motor oil. Unlike standard synthetic rubber hoses, the PTFE construction prevents "fuel smell" from leaching through the lines, making it an essential choice for street and track vehicles alike.

This bulk 100-foot roll provides ample length for full-vehicle plumbing projects. The inner stainless steel braid provides high-pressure reinforcement, while the durable black outer coating protects the braid from abrasion and gives your engine bay a clean, professional appearance. This hose is designed to be used with Fragola's specific PTFE hose ends for a secure, leak-free seal.

• Part Type: PTFE Hose
• Hose Size: -8AN
• Length: 100 Feet
• Core Material: PTFE (Polytetrafluoroethylene)
• Reinforcement: Stainless Steel Braid
• Finish: Black Protective Coating
• Compatibility: E85, Methanol, Gasoline, Oil, and Coolant

Vibrant Performance silicone vacuum hoses provide reliable signal routing for boost and vacuum lines in high-performance engine bays. Unlike standard rubber lines that become brittle over time, these hoses are engineered to resist peeling, cracking, and swelling. The high-strength silicone construction is specifically designed to avoid collapse under high vacuum operation, ensuring consistent performance for MAP sensors, wastegates, and blow-off valves.

• Internal Diameter: 3/8" (9.5mm)
• Length: 10 ft.
• Color: Black
• Material: High-temperature silicone
• Certification: Meets SAE J20R3 specifications
• Manufacturer Part Number: 2107

Vibrant Performance silicone vacuum hoses are engineered for reliability in high-performance engine bays. Designed to maintain structural integrity under high-vacuum operation, this tubing is built to resist collapsing, peeling, cracking, or swelling when exposed to the heat and pressure of demanding automotive environments.

This 10-foot Pit Pack provides a professional-grade solution for routing vacuum lines for turbocharger wastegates, blow-off valves, and boost controllers. The high-grade silicone material offers superior longevity and temperature resistance compared to standard rubber lines, ensuring consistent performance and a secure fit on 5/16-inch or 8mm fittings.

• Part Number: 2106
• Inside Diameter: 5/16" (8mm)
• Length: 10 ft.
• Material: High-grade silicone
• Standard: Meets SAE J20R3 specifications
• Color: Black

Vibrant Performance Silicone Vacuum Hose Pit Packs provide a professional-grade solution for replacing worn, brittle, or leaking factory rubber vacuum lines. These hoses are engineered specifically for high-performance applications to prevent the common issues of collapsing under high vacuum or swelling under pressure. Constructed from high-stability silicone, they are resistant to peeling, cracking, and ozone degradation, ensuring long-term reliability in the high-heat environment of an engine bay.

This kit is ideal for plumbing critical components such as boost controllers, wastegates, blow-off valves, and intake manifolds. Every hose in this pack meets SAE J20R3 specifications, providing a secure fit and durable performance for street or track use.

• Meets SAE J20R3 specifications for automotive hose quality
• Designed to resist collapsing under high vacuum and heat
• Durable silicone construction prevents peeling, cracking, and swelling
• Black finish for a clean, professional appearance
• Manufacturer Part Number: 2104

Kit Includes:

• 5 ft of 1/8 in ID hose
• 10 ft of 5/32 in ID hose
• 4 ft of 3/16 in ID hose
• 4 ft of 1/4 in ID hose
• 2 ft of 3/8 in ID hose

Vibrant Performance nylon braided flex hoses provide a durable and flexible plumbing solution for high-performance automotive systems. This -4 AN hose features a reinforced CPE synthetic rubber inner liner protected by a two-tone black and blue nylon braided cover, offering superior abrasion resistance and easy routing through tight engine bays.

This flex hose is engineered for oil, water, fuel, coolant, and vacuum service. While compatible with E85 and methanol, fuel vapors may permeate the CPE liner if fluid is left stagnant for extended periods; for dedicated ethanol applications, a PTFE-lined hose is recommended. Note: This hose is not for use in high-pressure hydraulic or brake systems, nor is it rated for submerged in-tank use.

• Manufacturer Part Number: 11964B
• Hose Size: -4 AN
• Length: 10 Foot Roll
• Operating Temperature: -40°F to 300°F (-40°C to 150°C)
• Inner Liner: Reinforced CPE Synthetic Rubber
• Outer Cover: Nylon Braid
• Finish: Two-Tone Black/Blue

Vibrant Performance stainless steel braided flex hoses provide a high-strength plumbing solution for critical automotive systems. This -16 AN hose features a high-tensile stainless steel outer cover for superior abrasion resistance, surrounding a reinforced CPE (Chlorinated Polyethylene) synthetic rubber inner liner designed for durability and flexibility.

• Manufacturer Part Number: 11933
• Size: -16 AN
• Length: 20 foot roll
• Inner Liner: Reinforced CPE synthetic rubber
• Outer Cover: Stainless steel braid
• Operating Temperature: -40°F to 300°F (-40°C to 150°C)
• Compatibility: Oil, water, fuel, coolant, and vacuum service

While suitable for E85 and methanol, please note that fuel fumes may permeate through the CPE liner if fuel is left stagnant for long periods; for dedicated E85 applications, consider PTFE-lined hoses. This hose is NOT for use as a brake line, high-pressure hydraulic line, or for in-tank submersion.

Fits 2017-2022 Audi RS3 and TT RS Quattro models equipped with the 2.5T engine.

The APR Cast Aluminum Turbocharger Inlet is a high-flow upgrade designed to eliminate intake restriction and maximize the performance of your 2.5T TFSI engine. Engineered for DIY enthusiasts and tuners alike, this massive 4-inch inlet replaces the restrictive factory unit to provide significant flow gains, improved throttle response, and a more aggressive engine note. While specifically designed for use with the APR Carbon Fiber Back Tube, its modular design allows for adaptation to other intake setups using appropriate couplers.

Constructed from durable cast aluminum, this inlet features interchangeable adapter rings that allow it to bolt up to various turbocharger configurations. This versatility makes it an ideal foundation for both stock and upgraded turbo builds. The package also includes a dedicated heat shield to manage under-hood temperatures and maintain intake efficiency.

• Massive 4-inch cast aluminum construction for maximum airflow
• Interchangeable adapter rings for compatibility with different turbochargers
• Integrated heat shield included for thermal management
• Designed for seamless integration with APR Carbon Fiber Back Tube
• Improves horsepower, torque, and throttle response
• Manufacturer Part Number: CI100038-C

The Vibrant Performance 11982R -12 AN Nylon Braided Flex Hose is engineered for high-performance fluid transfer in oil, fuel, coolant, water, and vacuum systems. This hose features a durable two-tone black and red nylon braided cover that provides superior abrasion resistance compared to traditional rubber hoses. The outer braid protects a reinforced CPE (Chlorinated Polyethylene) synthetic rubber inner liner, ensuring reliability across a wide range of automotive plumbing applications.

• Manufacturer Part Number: 11982R
• Size: -12 AN
• Length: 20-foot roll
• Construction: Reinforced CPE synthetic rubber liner with nylon braided cover
• Operating Temperature: -40°F to 300°F (-40°C to 150°C)
• Fluid Compatibility: Oil, fuel, water, coolant, and vacuum

While suitable for E85 and methanol use, note that fuel fumes may permeate the CPE liner during long periods of stagnation. This hose is not recommended for high-pressure hydraulic applications, brake lines, or in-tank fuel submersion.

The Vibrant Performance 29012 Pre-Assembled PTFE Flex Hose Assembly provides a reliable, leak-free solution for plumbing critical automotive fluid systems. These professional-grade lines feature a PTFE lining, making them highly resistant to chemical degradation and compatible with a wide range of fluids including fuel, oil, nitrous, and coolant. Each assembly is built with black anodized aluminum crimp-on fittings installed using a hydraulic crimping tool and is pressure tested to its rated working pressure to ensure maximum integrity under load.

• Manufacturer Part Number: 29012
• Hose Size: -8AN
• Length: 24 inches
• Fitting Configuration: Straight to Straight
• Hose End Material: Black Anodized Aluminum
• Lining: PTFE (Polytetrafluoroethylene)
• Construction: Professionally crimped and pressure tested
• Compatibility: Suitable for fuel, oil, nitrous, and coolant systems
• Note: Not for use in high-pressure hydraulic applications

The Vibrant Performance 11978R -8 AN Nylon Braided Flex Hose is engineered for high-performance fluid transfer in demanding environments. This hose features an abrasion-resistant nylon braided outer cover surrounding a reinforced CPE synthetic rubber inner liner, providing the necessary durability for plumbing oil, water, fuel, coolant, and vacuum lines.

• MPN: 11978R
• Size/Length: -8 AN Hose, 20-foot roll
• Construction: Reinforced CPE synthetic rubber liner with a two-tone black and red nylon braided cover
• Operating Temperature: -40°F to 300°F (-40°C to 150°C)
• Fluid Compatibility: Suitable for oil, water, coolant, vacuum, and fuel (including E85 and methanol)
• Limitations: Not for use in hydraulic pressure/brake systems or for in-tank (submersed) applications

Note: While compatible with E85 and methanol, vapors may permeate the CPE liner if fuel remains stagnant for extended periods. For dedicated E85 systems requiring zero permeation, a PTFE-lined hose is recommended.

Vibrant Performance -8 AN Black Nylon Braided PTFE Flex Hose is engineered for high-demand fluid transfer where chemical resistance and thermal stability are critical. This hose features a highly durable and flexible PTFE inner liner that effectively eliminates fuel vapor permeation, a common issue with standard rubber-lined hoses that leads to fuel odors in enclosed spaces.

The outer black nylon braid provides a professional finish and offers superior protection against abrasion and corrosion in tight engine bays. This bulk 150ft roll is suitable for plumbing entire vehicle systems, including race fuels, oils, transmission, clutch, power steering, and coolant fluids. It is designed to withstand extreme environments with an operating temperature range of -94°F to 480°F (-70°C to 250°C).

• Series: Braided PTFE Flex Hose
• Hose Size: -8 AN
• Liner Material: PTFE (Polytetrafluoroethylene)
• Outer Cover: Black Nylon Braid
• Length: 150ft Roll
• Temperature Range: -94°F to 480°F (-70°C to 250°C)
• Fluid Compatibility: Race fuels, engine oil, transmission, clutch, power steering, and coolant
• Manufacturer Part Number: 19038

Vibrant Performance -6 AN Black Nylon Braided Flex Hose is engineered for high-performance automotive plumbing where fluid containment and durability are critical. This hose features a flexible PTFE (Polytetrafluoroethylene) inner liner, which is specifically designed to eliminate fuel vapor permeation—a common issue with standard rubber hoses that causes a persistent fuel smell in enclosed garages. The black nylon braided outer cover provides superior protection against abrasion and corrosion while maintaining a lightweight, professional finish in the engine bay.

This bulk 150ft roll (MPN: 19036) is versatile enough for use with all race fuels and oils, as well as transmission, clutch, power steering, and coolant systems. Its high thermal resistance ensures reliable performance under extreme racing conditions.

• Series: Vibrant Performance PTFE Flex Hose
• Part Number: 19036
• Hose Size: -6 AN
• Length: 150ft Roll
• Liner Material: PTFE (Prevents vapor permeation)
• Outer Material: Black Nylon Braid
• Operating Temperature Range: -94°F to 480°F (-70°C to 250°C)

Vibrant Performance Black Nylon Braided Flex Hoses provide a versatile and durable plumbing solution for high-performance automotive systems. This 5-foot roll features a reinforced CPE synthetic rubber inner liner encased in a black nylon braided cover, offering excellent abrasion resistance and a clean, professional appearance.

Engineered for compatibility with oil, water, fuel, coolant, and vacuum service, this hose is designed to handle demanding engine bay conditions. While suitable for E85 and methanol, users should note that fuel fumes may permeate the CPE liner if left stagnant for extended periods. For dedicated long-term ethanol applications, a PTFE-lined hose is recommended. Note: This hose is not for use in braking systems, high-pressure hydraulic lines, or in-tank (submerged) applications.

• Manufacturer Part Number: 11993
• Hose Size: -16 AN
• Length: 5 Foot Roll
• Inner Material: Reinforced CPE Synthetic Rubber
• Outer Material: Black Nylon Braid
• Operating Temperature: -40°F to 300°F (-40°C to 150°C)
• Applications: Oil, Water, Fuel, Coolant, Vacuum

The Vibrant Performance Braided Flex Hose is a high-quality plumbing solution designed for demanding automotive environments. This hose features a two-tone nylon braided outer cover that provides excellent abrasion resistance while protecting the reinforced CPE synthetic rubber inner liner. It is an ideal choice for plumbing oil, water, fuel, coolant, and vacuum systems where flexibility and durability are required.

While this CPE-lined hose is compatible with E85 and methanol, be aware that fuel vapors can permeate the liner if the vehicle sits for long periods; for dedicated E85 applications, a PTFE-lined hose is often preferred. Note that this hose is not suitable for high-pressure hydraulic systems, such as brake lines, nor is it rated for in-tank submersion.

• Manufacturer Part Number: 11980R
• Size: -10 AN
• Length: 20 Foot Roll
• Color: Two-Tone Black and Red
• Inner Liner: Reinforced CPE Synthetic Rubber
• Outer Braid: Nylon
• Operating Temperature Range: -40°F to 300°F (-40°C to 150°C)
• Fluid Compatibility: Oil, Water, Fuel, Coolant, and Vacuum

Fits select 2015-2026 Audi A3, S3, Q3, TT, TTS and Volkswagen GTI, Golf R, Jetta GLI, Arteon, and Atlas models.

The APR Turbo Inlet Pipe is a high-flow, bolt-on upgrade designed to eliminate intake restrictions before the turbocharger. Unlike fabricated or plastic units, this pipe is cast from aluminum to allow for an organically shaped, gradual transition. This design maintains a larger internal diameter throughout, significantly reducing turbulence and allowing the turbocharger to operate more efficiently. It is a highly recommended upgrade for all performance stages utilizing IHI IS12, IS20, or IS38 turbochargers.

Engineering and construction are focused on durability and precision fitment. Each unit features a CNC-machined inlet and outlet to ensure a secure, leak-free connection. The assembly includes a CNC-machined billet stainless-steel securing arm and a billet aluminum PCV bung to replace the prone-to-failure plastic factory components. This pipe replaces the restrictive factory unit to improve throttle response and support higher boost levels.

• Manufacturer Part Number: MS100137
• Flow Rate: 441 cfm vs. 379 cfm stock (@ 28" H2O)
• Construction: High-quality cast aluminum
• Hardware: CNC-machined billet stainless-steel securing arm and billet aluminum PCV bung
• Direct bolt-on replacement for factory plastic inlet
• Includes new sealing o-ring
• Compatible with IS12, IS20, and IS38 turbochargers

Fits 2017-2020 Audi RS3 and 2018-2022 Audi TT RS (2.5T).

The APR Turbocharger Inlet System is engineered to eliminate the most significant flow restriction in the factory intake tract. By replacing the restrictive factory inlet with a massive 4-inch carbon fiber tube and an organically shaped 4-inch cast aluminum turbo inlet, this system increases airflow by up to 45% over stock, or up to 60% when paired with an APR Intake Filter. The design maintains the largest possible cross-sectional area from the airbox all the way to the compressor cover, outperforming standard tapered designs.

For thermal management, the system includes a thick stainless steel heat shield to isolate the intake charge from the turbocharger manifold. It also features an external stainless PCV pipe for proper placement without disrupting internal airflow. The system is compatible with both factory and hybrid turbochargers via interchangeable interlocking adapter rings (larger hybrid rings sold separately).

• 4-inch carbon fiber inlet tube
• 4-inch cast aluminum turbocharger inlet
• Includes stainless steel heat shield and mounting hardware
• Interlocking adapter rings for port-matched turbo entrance
• Stainless steel external PCV pipe
• Significant flow gains: 45% over factory components
• Manufacturer Part Number: CI100038

Vibrant Performance Polyester Reinforced Silicone Heater Hoses are engineered for cooling system applications requiring high flexibility and thermal stability. This 3/4-inch (19mm) I.D. hose is constructed with multi-ply polyester reinforcement, allowing it to withstand extreme operating temperatures while maintaining pressure integrity under demanding conditions. It is ideal for custom radiator and heater core plumbing where standard rubber hoses may degrade or fail.

• Inside Diameter: 3/4" (19mm)
• Length: 20 ft. Roll
• Material: Polyester reinforced silicone
• Temperature Range: -58°F to 392°F (-50°C to 200°C)
• Compliance: Exceeds SAE J20R3 requirements
• Color: Black
• Part Number: 2045

Note: This silicone hose is designed specifically for coolant service and is not suitable for fuel or oil transfer applications.

Fits select 1994-1999 Volvo 850, S70, V70, and C70 models.

This do88 silicone heater hose kit is a high-performance replacement for the factory rubber hoses, which often become brittle and prone to failure over time due to constant heat cycles. Engineered to withstand higher temperatures and pressure than OE EPDM rubber, these reinforced silicone hoses provide long-term reliability for your Volvo's cooling system.

Designed for a direct-fit installation, these hoses route coolant to and from the heater core using the factory-style layout. The multi-layer reinforced construction ensures the hoses maintain their shape and integrity under heavy load, making them an essential upgrade for both daily drivers and high-mileage P80 platform vehicles.

• Manufacturer Part Number: DO88-KIT126S
• Material: High-quality reinforced silicone
• Color: Black
• Application: Heater system supply and return lines
• Direct replacement for factory rubber hoses

Fits 2022-2026 Subaru BRZ and Toyota GR86.

The PERRIN Inlet Hose replaces the restrictive, corrugated factory rubber intake bellows with a high-flow, smooth-bore silicone tube. By eliminating the internal turbulence caused by the stock accordion-style design, this inlet hose optimizes airflow to the throttle body for improved throttle response and a more consistent air charge. This is a direct-fit performance upgrade that requires no permanent modifications or ECU recalibration.

Constructed from multi-layer reinforced silicone, the PERRIN hose is designed to resist collapsing under high vacuum and will not degrade over time like the OEM rubber part. The smooth interior walls ensure laminar airflow, while the vibrant red finish provides a significant aesthetic upgrade to the FA24 engine bay.

• Manufacturer Part Number: PSP-INT-432RD
• Material: Multi-layer reinforced silicone
• Color: Red finish
• Direct replacement for factory corrugated intake hose
• Includes high-quality stainless steel hose clamps
• Smooth internal diameter for reduced air turbulence

Vibrant Performance 11918 Braided Flex Hose provides a durable and versatile plumbing solution for high-performance automotive systems. Engineered for a wide range of fluids, this hose features a 300 Series stainless steel outer braid for superior abrasion and corrosion resistance, protecting a reinforced Chlorinated Polyethylene (CPE) synthetic rubber inner liner.

• Service Compatibility: Suitable for oil, water, fuel, coolant, and vacuum lines.
• Temperature Range: Maintains integrity from -40°F to 300°F (-40°C to 150°C).
• Materials: Stainless steel outer braid with a reinforced CPE synthetic rubber core.
• E85/Methanol Note: Compatible for use, though vapors may permeate the CPE liner if fuel remains stagnant for long periods; for dedicated long-term E85 storage, PTFE-lined hose is recommended.
• Restrictions: Not for use in braking systems, high-pressure hydraulic lines, or in-tank (submersed) applications.
• Specifications: -8 AN hose size, 10-foot roll, MPN 11918.

Fits 2002-2007 Subaru WRX and 2004-2021 Subaru STI.

The Torque Solution HD Cast Aluminum 2.4in Hard Turbo Inlet is a performance-critical upgrade designed to replace the restrictive and failure-prone factory rubber intake hose. While OEM and silicone inlets can collapse under high vacuum or increased boost levels, this rigid cast aluminum pipe maintains its shape and diameter, ensuring consistent, turbulent-free airflow to the turbocharger compressor housing.

• Heavy-duty cast aluminum construction prevents inlet collapse
• 2.4-inch (60mm) internal diameter for improved flow over stock
• Direct-fit design for EJ-series turbo configurations
• Durable finish for heat resistance and engine bay aesthetics
• Manufacturer Part Number: TS-SU-881-O

Fits 2011-2021 Ford Mustang GT, GT350, and GT500 models equipped with the 5.0L or 5.2L Coyote engine.

The Torque Solution Cylinder Head Cooling Mod is engineered to solve the common issue of coolant stagnation at the rear of the cylinder heads on Ford Coyote engines. In the factory configuration, coolant can become trapped at the back of the engine, leading to localized hot spots specifically on cylinders 4 and 8. This kit promotes active coolant circulation through the rear of the heads, helping to equalize temperatures and protect your engine during high-load or forced induction operation.

• Prevents localized overheating at the rear cylinders
• Promotes consistent coolant flow across both cylinder heads
• Essential upgrade for high-performance and track-driven Coyote engines
• Simple installation to improve engine longevity
• Manufacturer Part Number: TS-FRD-680