Restore the performance of your DS18 Project 360 8-inch driver with this genuine factory-spec recone kit. Engineered specifically for the Project 360 series, this kit allows you to replace damaged or worn internal components including the cone, voice coil, spider, and surround, avoiding the cost of a full driver replacement.

• Designed specifically for DS18 Project 360 8-inch drivers
• Includes high-quality cone, voice coil, spider, and surround assembly
• Maintains original Thiele/Small parameters and acoustic signature
• Precision-engineered for a drop-in repair that restores factory sound quality

The DS18 High-Sensitivity Mid-High Loudspeaker is engineered for high-output audio systems that demand extreme efficiency and rapid serviceability. This 8-inch driver is built to bridge the gap between mid-bass and high frequencies, delivering a broad response range of 95Hz to 17kHz with a staggering 102dB sensitivity rating. This high sensitivity allows the speaker to produce massive volume even with moderate power input.

A standout technical feature of this model is the integrated rotating recone kit. This design allows for simplified field maintenance and alignment, making it an ideal choice for competition-grade builds or professional audio environments where downtime must be minimized. The 4-ohm impedance ensures compatibility with a wide range of high-performance car audio amplifiers.

• Diameter: 8 inches
• Nominal Impedance: 4 Ohms
• Sensitivity: 102dB
• Frequency Response: 95Hz - 17kHz
• Type: Mid-High Range Loudspeaker
• Special Feature: Rotating Recone Kit for simplified servicing

Engineered for high-decibel output and professional-grade vocal clarity, the DS18 8-inch High-Sensitivity Mid-High Loudspeaker is built for competition-level audio environments. With a 100.2dB sensitivity rating, this driver is exceptionally efficient, converting power into clear, loud sound that cuts through high ambient noise levels and heavy bass. The frequency response range of 90Hz to 17kHz focuses strictly on the critical mid and high frequencies to ensure your soundstage remains crisp and articulated.

The defining feature of this loudspeaker is the integrated Rotating Recone system. This design facilitates easier field maintenance and part replacement, allowing for faster turnaround without the need to replace the entire speaker housing. Wired at 4 ohms, it is compatible with a wide range of high-performance amplifiers found in pro audio and custom automotive installations.

• Speaker Type: Mid-High Loudspeaker
• Diameter: 8 inches
• Sensitivity: 100.2dB
• Nominal Impedance: 4-Ohm
• Frequency Response: 90Hz - 17kHz
• Feature: Rotating Recone system for efficient maintenance

Restore the performance and acoustic clarity of your audio system with the DS18 Project 360 6x9-Inch Recone Kit. Designed specifically for the Project 360 series, this kit provides a technical solution for repairing blown or damaged speakers without requiring a complete driver replacement. By replacing the internal soft parts, you maintain the original motor and basket while returning the speaker to its factory-spec output and impedance.

This kit is engineered for precise tolerances, ensuring the voice coil and spider align perfectly within the magnetic gap for optimal excursion and power handling. Whether you are correcting a torn surround or a burnt coil from extreme power levels, this recone kit provides the high-performance components needed for a professional-grade overhaul.

• Fits DS18 Project 360 6x9-inch speakers
• Complete soft-part replacement including cone, voice coil, and spider
• Engineered to factory specifications for consistent sound signature
• Durable surround material for long-lasting excursion and response

DS18 high-sensitivity mid-high loudspeakers are engineered for high-output audio systems that demand extreme volume and clarity. Measuring 6x9 inches, these drivers bridge the gap between mid-range and high-frequency reproduction, making them ideal for pro-audio style car builds and competition setups.

These speakers feature a unique rotating recone design, simplifying field repairs and installation adjustments. With a high sensitivity rating of 101dB, they produce significant sound pressure levels (SPL) with efficient power usage. The 95Hz to 17kHz frequency range ensures a punchy, detailed response across the vocal and high-frequency spectrum, providing the crisp definition needed to cut through cabin noise.

• Speaker Size: 6x9"
• Impedance: 4-Ohm
• Sensitivity: 101dB
• Frequency Response: 95Hz - 17kHz
• Design: Mid-High Loudspeaker
• Special Feature: Rotating Recone for simplified servicing and orientation

DS18 high-sensitivity mid-high loudspeakers are engineered for high-volume audio systems where vocal clarity and upper-frequency detail are paramount. These 6x9-inch drivers feature a high 98dB sensitivity rating, allowing them to deliver massive output with high efficiency. The unique rotating recone design is built for specialized installations and easier maintenance, while the broad 90Hz to 17kHz frequency range ensures full-bodied sound across the most critical audio spectrum.

• Speaker Type: 6x9-inch mid-high frequency loudspeaker
• Impedance: 4-ohm
• Sensitivity: 98dB for maximum efficiency and volume
• Frequency Response: 90Hz - 17kHz
• Feature: Innovative rotating recone assembly
• Optimized for high-output mid-range and high-frequency reproduction

The DS18 Project 360 6.5-inch Recone Kit provides everything needed to restore a damaged or blown Project 360 series loudspeaker to its original factory performance. Rather than replacing the entire driver, this kit allows you to retain your existing motor and basket, saving cost while ensuring the acoustic characteristics of your audio system remain consistent.

Built to match the exact specifications of the Project 360 series, this kit features high-quality materials designed to handle the thermal and mechanical stresses of high-output audio applications. Proper installation ensures a precise fit for the voice coil and suspension, returning your speaker to its original power handling and clarity.

• Specifically designed for DS18 Project 360 series 6.5-inch loudspeakers
• Restores factory performance and acoustic response
• Includes pre-assembled cone, voice coil, spider, and surround for streamlined installation
• Cost-effective alternative to full speaker replacement
• Maintains original power handling and sensitivity ratings

Engineered for high-SPL (Sound Pressure Level) environments, the DS18 6.5-inch mid-high loudspeaker delivers extreme vocal clarity and top-tier efficiency. With a class-leading 100.5dB sensitivity rating, this driver produces massive output with minimal power, making it an essential component for pro-audio style car systems and competition builds. It covers a broad frequency spectrum from 100Hz to 17kHz, ensuring your mid-range and high-frequency audio remains crisp and articulate.

This loudspeaker features an innovative rotating recone system, designed to simplify maintenance and field repairs while allowing for precise component alignment during installation. Built to withstand the rigors of high-output use, it provides a reliable solution for bridging the gap between mid-bass drivers and dedicated high-frequency tweeters.

• Size: 6.5 inches
• Sensitivity: 100.5dB
• Impedance: 4-Ohm
• Frequency Response: 100Hz - 17kHz
• Design: High-sensitivity mid-high driver
• Serviceability: Integrated rotating recone system

DS18 high-sensitivity mid-high loudspeakers are engineered for high-output audio environments where clarity and efficiency are critical. These 6.5-inch drivers bridge the gap between traditional midrange and high-frequency speakers, covering a wide 95Hz to 17kHz range. The unique rotating recone design provides added flexibility for terminal alignment and simplified servicing in custom enclosures.

• Driver Size: 6.5 inches
• Sensitivity: 98dB for maximum output efficiency
• Impedance: 4-Ohm
• Frequency Response: 95Hz - 17kHz
• Design: High-sensitivity mid-high reproduction
• Special Feature: Rotating recone kit compatibility

The DS18 6.5-inch mid-range loudspeaker delivers high-output audio performance in a compact, shallow-mount package. Engineered for applications where mounting depth is limited, this speaker provides clear and punchy mid-frequency response without requiring extensive modifications to door panels or custom enclosures. The water-resistant cone makes it a durable choice for marine applications, motorcycles, or off-road vehicles where exposure to moisture is a constant factor.

With a power handling of 200 Watts RMS and a 4-ohm impedance, this driver is built to handle significant amplification while maintaining acoustic clarity. The shallow design is specifically intended for enthusiasts who need professional-grade sound reinforcement in tight spaces where traditional high-output mid-ranges would be too deep to fit.

• Diameter: 6.5 inches
• Power Handling: 200 Watts RMS
• Impedance: 4 Ohms
• Mounting Depth: Shallow profile for restricted spaces
• Cone: Water-resistant treated material
• Type: Mid-range loudspeaker

The DS18 6x9-inch shallow mid-range loudspeaker delivers high-output audio performance in applications where mounting depth is limited. Engineered for clear, authoritative mid-range response, this driver is the ideal solution for door panels, rear decks, or custom enclosures with restrictive clearances.

Built to handle 175 Watts RMS, this speaker features a 2-ohm impedance to maximize power draw from compatible amplifiers. The included low-profile grill provides essential protection for the cone and internal components without compromising the speaker's slim footprint or acoustic transparency.

• Part Type: Shallow Mid-Range Loudspeaker
• Dimensions: 6x9-inch
• Power Handling: 175 Watts RMS
• Impedance: 2-Ohm
• Design: Shallow-mount profile for tight installations
• Included Hardware: Protective speaker grill

This high-output audio combination pairs the DS18 PRO-GM 6.5-inch mid-range loudspeakers with 3.8-inch super bullet tweeters to deliver a balanced, pro-audio sound stage. The PRO-GM series is engineered for high-sensitivity mid-range performance, while the bullet tweeters provide the sharp, directional high-frequency response needed to cut through ambient noise in high-volume environments.

• Brand: DS18
• Series: PRO-GM
• Mid-Range Diameter: 6.5 inches
• Mid-Range Power Handling: 140 Watts
• Tweeter Type: 3.8-inch Super Bullet
• Tweeter Power Handling: 120 Watts
• Configuration: Speaker and Tweeter Pair

The DS18 8-inch shallow mid-range loudspeaker is engineered for high-output audio systems where mounting depth is a critical constraint. By utilizing a high-strength neodymium magnet, this speaker provides superior motor force and sensitivity while maintaining a slim profile and significantly reduced weight compared to traditional ferrite drivers.

With a power rating of 200W RMS and a 4-ohm impedance, this loudspeaker delivers precise tonal clarity and the volume necessary to cut through ambient noise in custom automotive or marine installations. Its shallow design makes it a versatile solution for door panels and custom enclosures where interior clearance is limited.

• Speaker Type: Mid-Range Loudspeaker
• Diameter: 8 inches
• Power Handling: 200 Watts RMS
• Nominal Impedance: 4 Ohms
• Magnet Material: Neodymium
• Design: Shallow Mount

The DS18 PRO Audio Speaker System provides a high-output solution for listeners seeking professional-grade sound in a mobile environment. This system combines 6.5-inch and 6x9-inch drivers, both featuring integrated bullet tweeters designed to deliver extreme clarity and volume. Unlike standard coaxial speakers, these PRO-style drivers utilize bullet resonators to project high frequencies more efficiently, ensuring your music cuts through road noise and high-decibel bass.

Built for durability and performance, these speakers are engineered to handle the demands of high-SPL (Sound Pressure Level) applications. Whether you are upgrading factory locations or installing them in custom door pods, the DS18 PRO series offers the efficiency needed to produce massive sound without sacrificing the sharp detail provided by the built-in bullet tweeters.

• System includes 6.5-inch and 6x9-inch PRO audio drivers
• Integrated built-in bullet tweeters for enhanced high-frequency projection
• Designed for high-output audio systems and SPL builds
• Engineered for professional-grade clarity and extreme volume

Upgrade your factory audio system with the DS18 6.5" PRO Midrange Coaxial Speaker Kit, designed for high-sensitivity output and improved vocal clarity. This kit replaces underwhelming OE speakers with professional-grade midrange drivers that integrate a coaxial tweeter, providing a full-range sound stage without the need for custom fabrication. The included amplifier ensures the speakers receive consistent, clean power for maximum headroom, while the OEM adapters allow for a direct fit into factory mounting locations.

• 6.5" PRO Midrange Drivers: High-output coaxial design for superior mid-to-high frequency reproduction.
• Integrated Power: Includes a dedicated amplifier matched to the power requirements of the PRO series drivers.
• Direct Fitment: Comes with OEM-style adapter brackets to simplify installation in factory speaker apertures.
• Technical Design: Engineered for high-volume environments where standard speakers distort.

Upgrade your factory audio system with the DS18 PRO Audio 6.5-inch speaker kit, a comprehensive solution designed to deliver high-output sound and increased clarity. This package eliminates the guesswork of matching components by pairing high-performance speakers with a dedicated amplifier for consistent power delivery across the frequency range.

• DS18 PRO Audio 6.5-inch high-performance speakers
• Compact amplifier designed for efficient power output and minimal heat
• OEM speaker adapters to ensure a clean, bolt-on installation in factory locations
• Complete wiring kit with necessary power, ground, and signal cables

The included vehicle-specific OEM adapters allow for a direct replacement of stock speakers without permanent modifications to the door panels or interior. Whether you are looking to increase volume or improve tonal balance, this all-in-one kit provides a professional-grade audio foundation for your vehicle's interior.

The DS18 PRO-TWN1 is a professional-grade 3-inch high compression super bullet tweeter engineered for high-frequency clarity and efficiency in space-constrained installations. Featuring a high-strength neodymium motor, this tweeter provides massive output with a significantly slimmer profile than traditional ferrite magnets, making it an ideal choice for custom door panels and tight mounting locations.

• Slim mounting profile allows for installation in shallow depth areas.
• High-strength neodymium magnet provides superior flux density and efficiency.
• 1-inch high-temperature titanium voice coil ensures durability under high power.
• Integrated capacitor protects the driver from damaging low-end frequencies.

• Manufacturer Part Number: PRO-TWN1
• Power Handling: 120 Watts RMS
• Nominal Impedance: 4 Ohms
• Voice Coil Diameter: 1 inch (25.4mm)
• Voice Coil Material: Titanium
• Magnet Type: Neodymium
• Type: Super Bullet Tweeter

Fits 1997-2006 Jeep TJ models.

The DS18 TJ-SBAR/BK overhead soundbar enclosure is engineered to maximize the audio potential of your Jeep TJ. This high-density enclosure mounts directly to the factory roll bar, providing a secure and integrated housing for a massive speaker array. Designed for enthusiasts who need more volume and clarity in open-air environments, it expands your system capacity far beyond the limited factory speaker locations.

This enclosure features a textured black finish designed to match the rugged interior of your Jeep while resisting the elements during top-down driving. It is specifically ported or sealed to accommodate high-output speakers, ensuring you get the most out of your mid-range drivers and tweeters without custom fiberglass work.

• Direct overhead mounting for 1997-2006 Jeep TJ
• Fits four 6.5-inch speakers and two 4-inch speakers or tweeters
• Durable, weather-resistant construction for off-road use
• High-quality textured black finish
• Manufacturer Part Number: TJ-SBAR/BK
• Note: Speakers and mounting hardware for speakers are not included

The DS18 PRO-X46.4BM is a high-performance 4x6-inch mid-range bullet loudspeaker engineered for audio enthusiasts who demand high-volume clarity and concert-level output. As part of the PRO-X series, this driver is designed to handle the rigors of high-output systems while maintaining vocal precision. The integrated resonator (bullet) helps project sound and extends the high-mid frequency response, making it an ideal choice for systems needing a powerful midrange presence.

• Model: PRO-X46.4BM
• Size: 4x6 inches
• Power Handling: 100 Watts RMS
• Nominal Impedance: 4 Ohms
• Driver Type: Mid-range with integrated bullet resonator
• Application: High-output professional and automotive audio systems

The DS18 PRO-TW3L is a high-performance 4-inch super bullet tweeter engineered to deliver concert-level high frequencies and stunning visual appeal. Built for competition-grade audio systems, this tweeter features a 1.5-inch titanium voice coil capable of handling 250W RMS, ensuring crisp, clear highs even at high volume levels.

Designed with integrated RGB LED lighting, the PRO-TW3L allows for custom aesthetic integration into your vehicle's interior or custom door panels. Its 4-ohm impedance and titanium diaphragm provide the durability and electrical efficiency required for professional-grade car audio builds.

• Manufacturer Part Number: PRO-TW3L
• Size: 4 inches
• Power Handling: 250 Watts RMS
• Impedance: 4-Ohms
• Voice Coil: 1.5-inch Titanium
• Integrated RGB LED lighting (requires RGB controller, sold separately)
• Titanium diaphragm for high-frequency accuracy and durability

The DS18 LRING8 is a universal 8-inch accent ring designed to integrate vibrant RGB LED lighting into your audio installation. Built to mount between the speaker and the mounting surface, this ring provides a high-intensity light halo that highlights the speaker cone and surround. It is an essential component for custom car audio builds where visual impact is as important as sound quality.

• Fits most standard 8-inch speakers and subwoofers
• Integrated RGB LED strips for wide-spectrum color customization
• Translucent construction for smooth, even light dispersion
• Pre-wired for integration into existing RGB controllers
• Manufacturer Part Number: LRING8

The DS18 LRING6 is a 6.5-inch universal accent ring designed to provide custom RGB LED illumination for your car audio system. This ring is engineered to install between the speaker and the mounting surface, creating a vibrant halo effect around your midranges, coaxial speakers, or subwoofers for a professional, show-ready aesthetic.

• Universal fitment for standard 6.5-inch speakers and subwoofers
• Integrated RGB LED strip provides multi-color accent lighting
• Translucent acrylic construction for even light dispersion
• Designed for use with standard RGB controllers (sold separately)
• Durable build quality for automotive environments
• Manufacturer Part Number: LRING6

The DS18 PRO-X10.4M is a high-performance 10-inch mid-range loudspeaker engineered for high-output car audio environments. Designed to deliver exceptional clarity at high volume levels, this driver provides the power handling and efficiency required for professional-grade sound stages and custom acoustic builds.

• Manufacturer Part Number: PRO-X10.4M
• Speaker Size: 10 inches
• Power Handling: 300 Watts RMS
• Nominal Impedance: 4 Ohms
• Type: Mid-range loudspeaker

This component is built to withstand the rigors of high-intensity playback, making it an ideal choice for enthusiasts looking to upgrade their vehicle's mid-frequency response with a reliable, high-wattage solution.

The DS18 PRO-CF69.4NR is a high-output 6x9-inch mid-bass loudspeaker designed for professional-grade automotive audio systems. Engineered with a powerful neodymium magnet, this speaker provides superior sensitivity and punchy mid-range response in a lightweight package compared to traditional ferrite-magnet alternatives.

This loudspeaker is built to sustain high volume levels with a continuous power handling of 300 Watts RMS at a 4-ohm impedance. It serves as a precise solution for listeners looking to fill the mid-frequency gap in high-performance builds, offering the thermal management and durability required for sustained, high-decibel audio reproduction.

• Manufacturer Part Number: PRO-CF69.4NR
• Dimensions: 6x9 inches
• Power Handling: 300 Watts RMS
• Nominal Impedance: 4 Ohms
• Magnet Type: Neodymium
• Category: Mid-Bass Loudspeaker

Engineered for high-output audio systems, the DS18 PRO-CF6.2NR is a 6.5-inch mid-bass loudspeaker designed to deliver punchy, accurate mid-range response with professional-grade clarity. Utilizing a powerful neodymium magnet structure, this driver provides exceptional motor strength in a lightweight, compact form factor, making it ideal for custom installations where space and weight are critical factors.

The PRO-CF6.2NR is built to handle sustained high-volume playback, featuring a 250W RMS power rating. Its 2-ohm impedance allows for maximum power extraction from compatible amplifiers, ensuring your mid-bass frequencies remain tight and impactful. Whether used in a multi-way pro-audio style car setup or a high-performance marine installation, this loudspeaker is designed for those who demand high SPL without sacrificing tonal quality.

• Model: PRO-CF6.2NR
• Size: 6.5 inches
• RMS Power Handling: 250 Watts
• MAX Power Handling: 500 Watts
• Impedance: 2 Ohm
• Magnet Material: Neodymium
• Type: Mid-Bass Loudspeaker

Upgrade your vehicle's audio system with the DS18 DXQ3.5 Deluxe Quality 3.5-inch full range speaker. Designed for precise audio reproduction, this speaker features a specialized yellow straw and composite foam cone. This material combination provides the necessary rigidity to prevent distortion while remaining lightweight enough for high-frequency responsiveness, ensuring clear and balanced sound across the entire range.

The DXQ3.5 is engineered for versatility, making it an excellent choice for dashboard, pillar, or door locations where a 3.5-inch driver is required. With a robust 60W RMS power rating and a standard 4-ohm impedance, it handles significant power while maintaining the clarity expected from the DXQ series.

• Speaker Type: 3.5" Full Range
• RMS Power Handling: 60 Watts
• Impedance: 4 Ohm
• Cone Material: Yellow Straw + Composite Foam Cone
• Series: Deluxe Quality (DXQ)
• Part Number: DXQ3.5

The DS18 PRO-FR8NEO is a high-output 8-inch full-range loudspeaker engineered for high-fidelity audio systems that demand both power and precision. By utilizing a neodymium magnet, this speaker achieves high flux density and superior efficiency in a lightweight package, making it an ideal choice for custom automotive installations where mounting weight and motor strength are critical factors.

Built to handle 250W RMS, the PRO-FR8NEO delivers clear, loud sound across a broad frequency spectrum. The 4-ohm impedance allows for versatile wiring configurations with most modern amplifiers. As part of the DS18 PRO series, this driver is designed to maintain thermal stability and performance during extended high-volume play.

• Manufacturer Part Number: PRO-FR8NEO
• Speaker Size: 8 inches
• Power Handling: 250 Watts RMS
• Nominal Impedance: 4 Ohm
• Magnet Type: Neodymium
• Classification: Full Range Loudspeaker

The DS18 PRO-FR6NEO is a high-performance 6.5-inch full range loudspeaker engineered for applications where space and weight are critical factors without sacrificing audio output. By utilizing a powerful neodymium motor, this speaker provides exceptional sensitivity and clarity, making it a professional-grade choice for high-output motorcycle systems, marine applications, and competitive car audio environments.

With a continuous power rating of 225W RMS, the PRO-FR6NEO is built to handle significant amplification while maintaining a clean frequency response. The neodymium magnet structure allows for a much shallower and lighter profile than traditional ferrite magnets, facilitating installation in tight door panels or custom enclosures where every millimeter and ounce counts.

• Manufacturer Part Number: PRO-FR6NEO
• Nominal Diameter: 6.5 inches
• Power Handling: 225 Watts RMS
• Nominal Impedance: 4 Ohms
• Motor Structure: High-grade Neodymium
• Speaker Type: Full Range Loudspeaker

The DS18 PRO-FR69NEO is a high-performance 6x9-inch full-range loudspeaker engineered for audio enthusiasts who demand extreme volume without sacrificing clarity. Utilizing a powerful neodymium magnet, this speaker delivers higher flux density and superior thermal stability while remaining significantly lighter than traditional ferrite-magnet alternatives. This makes it an ideal solution for custom door pods, motorcycle fairings, and high-output car audio builds where weight and space are critical factors.

With a 250W RMS power rating and a 4-ohm impedance, the PRO-FR69NEO is built to handle substantial power, maintaining crisp, distortion-free audio at high decibel levels. Its full-range design ensures a broad frequency response, capturing detailed mid-range and high-frequency content required to cut through road noise and competition environments.

• Manufacturer Part Number: PRO-FR69NEO
• Size: 6x9 inches
• Power Handling: 250 Watts RMS
• Impedance: 4 Ohms
• Magnet Material: High-strength Neodymium
• Configuration: Full-Range Loudspeaker

The DS18 PRO-FR5NEO is a high-output 5.25-inch full-range loudspeaker engineered for professional audio applications where space and weight are critical factors. By utilizing a high-strength neodymium magnet, this speaker delivers intense magnetic flux in a compact footprint, providing superior sensitivity and vocal clarity compared to traditional ferrite drivers.

Built to handle 200 Watts RMS, the PRO-FR5NEO is designed for high-performance audio builds, including custom door panels, motorcycle fairings, and marine applications where maximum SPL is required. Its full-range design ensures a broad frequency response, making it a versatile component for complex sound stages.

• Manufacturer Part Number: PRO-FR5NEO
• Speaker Size: 5.25"
• Power Handling: 200 Watts RMS / 400 Watts MAX
• Nominal Impedance: 4-Ohm
• Motor Material: High-Flux Neodymium
• Type: Full Range Loudspeaker