Carli Suspension collaborated with Deaver Spring Inc. to create a leaf spring pack tailored for Carli 2.5" and 4.5" Suspension Lifts. The kit offers a more predictable and comfortable ride with a slight reduction in load capacity.

• Progressive design addresses the harsh rebound of the factory main leaf and overload springs
• Fits 2017-23 Ford F250/F350 4×4, diesel, w/ 3.5- to 4-inch axle tube
• Tailored for 2.5-inch and 4.5-inch Carli Leveling Suspension Lifts
• Produces a one-inch lift, eliminates blocks
• Includes U-bolts and Rear Bump Stop Drops
• Provides 15 inches of suspension travel

This Part Fits:

Carli two-stage progressive rate leaf springs deliver the optimal balance between cargo capacity and ride quality to ensure you get the most out of your truck. These full-length packs are built by Deaver Spring to Carli’s precise specs.

• progressive rate spring reduces payload slightly but provides plush on and off-road ride quality.
• Provides 1" of rear lift while eliminating factory block.
• Includes U-bolts and bump stop drop kit.

This Part Fits:

Carli Suspension collaborated with Deaver Spring Inc. to create a leaf spring pack tailored for Carli 4.5" and 5.5" Suspension Lifts. The kit offers a more predictable and comfortable ride with a slight reduction in load capacity.

• 3-inch front lift, provides a 1-inch rear high stance on Carli 4.5”/5.5” Leveling Suspension Systems
• “Light” 3/4-ton cargo/tow capacity, full capacity attainable with long-travel airbags
• Fits 2017-23 Ford F250/F350 4×4, diesel, w/3.5″-4.0” axle tube
• Block-eliminating, full progressive spring pack
• Includes new U-bolts, rear bump stop drops
• Allows use of 37-inch tire

This Part Fits:

Bring up the rear of your 19+ Ram 3500 to match 2.5" leveling systems with this 1" billet block and U-bolt kit.

• Not compatible with Factoy Air Assist or DRW trucks.

This Part Fits:

Adjust pinion angle after installing suspension components with Rancho® this leaf spring shim kit. Made of aluminum for durability, the kit includes two shims that feature a 2.5 Degrees shim angle.

• CHANGE PINION ANGLE -- Allows adjustment of pinion angle after installation of suspension components
• COMPATIBILITY -- Universal fit to work with most aftermarket lift kits
• BUY WITH CONFIDENCE -- Comes with Rancho's limited one-year warranty
• SPECS -- 2.5 Degrees Shim angle, 2.38-in. width and sold as pair
• ENGINEERED TO LAST -- Made of durable aluminum for long life

This Part Fits:

Fits 2017-2023 Ford F250 and F350 4x4 models equipped with Carli Full Progressive Leaf Springs.

Maintain the performance and quiet operation of your rear suspension with the Carli Suspension Full Progressive Leaf Spring Bushing Kit. Over time, heavy towing, off-road articulation, and environmental exposure can wear down leaf spring bushings, leading to unwanted noise, binding, or erratic handling. This kit allows you to service your existing Carli springs rather than replacing the entire pack, ensuring your Ford Super Duty continues to deliver the smooth, controlled ride the system was engineered for.

• Direct replacement for Carli Full Progressive Leaf Spring bushings
• Restores factory-smooth suspension articulation and reduces rear-end noise
• Durable construction designed to withstand heavy load cycles and off-road use
• Complete kit for servicing a full set of rear leaf springs

Fits 2008-2016 Ford F-250 and F-350 4x4 models equipped with Carli Full Progressive Leaf Springs.

Restore the silent, smooth performance of your heavy-duty suspension with this complete replacement bushing kit. Over time and through heavy use, even high-quality polyurethane bushings can wear or dry out, leading to unwanted squeaks and increased road vibration. This Carli Suspension kit provides a direct-fit refresh for your leaf packs, ensuring your rear suspension maintains the articulation and ride quality you expect.

• Fits 2008-2016 Ford F-250 / F-350 4x4
• Designed specifically for Carli Full Progressive Leaf Spring packs
• High-density polyurethane construction for long-term durability
• Replaces worn or noisy bushings to eliminate suspension binding
• Complete kit for both rear leaf spring assemblies

Fits 2019-2023 Ram 3500 4x4 trucks.

These Carli Suspension rear lift blocks provide a precise 1-inch increase in rear ride height, allowing you to fine-tune your heavy-duty truck's stance. Whether you are looking to compensate for a front-end leveling kit or need additional clearance for larger tire packages, these blocks offer a reliable solution for adjusting the rear rake of your Ram 3500. Designed for the 4x4 platform, they install directly onto the rear axle to provide consistent lift without compromising the vehicle's heavy-duty hauling capabilities.

• Provides 1 inch of rear lift
• Designed specifically for the 2019-2023 Ram 3500 4x4 platform
• Ideal for leveling or adjusting rear-end rake
• Maintains factory-style suspension geometry
• Sold as a pair for a complete rear axle installation

Fits 2013-2023 Ram 3500 4x4 trucks.

This Carli Suspension bushing kit is specifically engineered for use with their Full Progressive Leaf Spring packs. Designed to replace worn components or complete a new installation, these bushings provide the durable, low-friction pivot points required to maintain the ride quality and increased articulation of a progressive spring setup. These heavy-duty bushings ensure your rear suspension operates smoothly under load while maintaining precise axle alignment.

• Designed specifically for Carli Full Progressive Leaf Springs
• Direct replacement for worn or damaged leaf spring bushings
• High-quality construction for long-term durability in heavy-duty applications
• Compatible with 2013-2023 Ram 3500 4x4 models
• Series: Alas

Fits 2013-2023 Ram 3500 4x4 models equipped with Carli Full Progressive Leaf Spring packs.

Maintaining the performance of a high-travel suspension system requires periodic inspection of wear items. This Carli Suspension Bushing Kit is a direct replacement for the bushings found in Carli Full Progressive Leaf Springs. Over years of heavy hauling, towing, and off-road cycling, original bushings can degrade, leading to increased NVH (noise, vibration, and harshness) and loose axle control. This kit allows you to refresh your leaf pack to its original specifications, ensuring quiet operation and proper suspension geometry.

• Specifically engineered for Carli Full Progressive Leaf Spring packs
• Direct replacement for worn or squeaking leaf spring bushings
• Restores factory-level NVH characteristics and axle stability
• Includes all necessary bushings for a full leaf pack refresh
• Heavy-duty construction designed to withstand high-stress cycles

Fits 2003-2009 Dodge Ram 2500 and 3500 4WD trucks equipped with Carli Full Progressive Leaf Springs.

Restore the ride quality and isolation of your rear suspension with this complete service kit from Carli Suspension. Designed specifically for their Full Progressive Leaf Spring packs, these replacement bushings address the degradation caused by heavy towing, high-mileage commuting, and off-road articulation. Replacing worn bushings eliminates unwanted play and reduces NVH (noise, vibration, and harshness) to keep your heavy-duty Ram handling as intended.

• Direct replacement for bushings in Carli Full Progressive Leaf Spring packs
• Engineered to maintain proper suspension geometry and cycling
• High-durability construction to withstand heavy loads and environmental debris
• Complete kit provides a full refresh for the rear leaf spring main eyes and shackles

Fits select 2019-2023 Ram 3500 4x4 (Diesel models with 4.25in axle tube).

Carli two-stage progressive rate leaf springs deliver a precise balance between heavy-duty cargo capacity and refined ride quality. These full-length leaf packs are custom-built by Deaver Spring to Carli’s specific tolerances, replacing the stiff factory leaf stack to soften the initial spring rate. This design significantly improves small-bump compliance while maintaining a slight rear-high stance when paired with Carli 3-inch front suspension systems.

Engineered for performance, these springs are capable of up to 15 inches of suspension travel when utilized with the factory shackle. The increased leaf count and thinner material help minimize axle wrap and wheel hop, providing more consistent traction. Note that installing this kit reduces the rear payload capacity to a "light" 3/4-ton rating to achieve the improved ride characteristics.

• Provides 2 inches of rear lift
• Full-length progressive leaf packs manufactured by Deaver Spring
• Compatible with 2019-2023 Ram 3500 4x4 Diesel with 4.25-inch axle tubes
• Supports up to 15 inches of suspension travel
• Reduces rear payload to a light 3/4-ton capacity
• Includes all necessary replacement U-bolts for installation

Fits 2013-2018 Ram 3500 4x4 Diesel models without factory air ride.

Carli Suspension's full-length progressive leaf springs, manufactured specifically for Carli by Deaver Spring Mfg, are engineered to transform the heavy-duty ride of the Ram 3500. By replacing the stiff factory leaf pack with a high-count, progressive-rate design, these springs significantly soften the initial spring rate at ride height, providing a much-needed improvement in street comfort and off-road compliance. This kit provides 2 inches of rear lift, perfectly leveling the vehicle's stance when paired with a Carli 3-inch front suspension system.

These springs are designed for maximum performance, capable of up to 15 inches of suspension travel when used with the factory shackle and properly tuned shocks. Beyond ride quality, the progressive architecture helps minimize axle wrap and wheel hop during acceleration. Note that these springs are designed for ride quality and will reduce the vehicle's effective payload capacity to a "light" 3/4-ton rating.

• Provides 2 inches of rear lift (maintains slight rear-high rake with Carli 3" front systems)
• Full-length progressive design manufactured by Deaver Spring Mfg
• Capable of 15" of suspension travel with factory shackle
• Minimizes axle wrap and wheel hop
• Softens initial spring rate for superior damping and comfort
• Fits 4x4 Diesel models ONLY; excludes models with factory Air Ride

Fits 2003-2009 Dodge Ram 2500 and 3500 (Diesel).

Carli two-stage progressive rate leaf springs deliver a precision balance between heavy-duty cargo capacity and refined ride quality. These full-length packs are manufactured by Deaver Spring to Carli’s strict specifications, specifically designed to eliminate the harshness of factory spring rates on the Dodge diesel platform.

This kit provides 2 inches of rear lift, which maintains a slight rear-high stance when used with Carli 3-inch front suspension systems. Beyond the height adjustment, these springs are engineered to minimize axle wrap and wheel hop while softening the initial spring rate at ride height for better small-bump compliance.

• Provides 2 inches of rear lift height
• Capable of 15 inches of suspension travel using factory shackles
• Reduces rear payload to a "light" 3/4-ton capacity for improved ride quality
• Full-length leaf packs manufactured by Deaver Spring
• Minimizes axle wrap and wheel hop during acceleration

Fits 2017-2023 Ford F-250 and F-350 4x4 trucks.

The Carli Suspension Progressive Add-A-Pack is engineered to transform the rear ride quality of your Super Duty by replacing the stiff factory lower overload leaf with a multi-leaf progressive pack. This design softens the initial suspension stroke for significantly better small-bump compliance and highway comfort while still providing the support needed for heavy towing and hauling as the leaves engage. This specific component is designed for the passenger side and is a key part of Carli leveling systems to ensure a balanced, refined ride.

• Fits 2017-2023 Ford F-250/F-350 4x4 models
• Passenger side specific configuration
• Progressive spring rate replaces harsh factory overload leaf
• Improved unladen ride quality without sacrificing load capacity
• Integrates with Carli Leveling systems

Fits 2017-2023 Ford F-250 and F-350 4x4 trucks.

The Carli Suspension Progressive Add-A-Pack is engineered to transform the rear suspension performance of your heavy-duty Ford. By replacing the stiff factory lower overload leaf with a custom-tuned, multi-leaf progressive pack, this system significantly improves small-bump compliance and ride quality without sacrificing the truck's essential payload capacity. This specific driver-side leaf pack is designed to integrate with Carli leveling systems to provide a balanced, predictable feel both on the highway and across rough terrain.

• Replaces harsh factory lower overload springs with a progressive rate stack
• Significantly improves rear-end ride quality and small-bump compliance
• Maintains factory load-carrying and towing capabilities
• Directly compatible with 2017-2023 Ford F-250/F-350 4x4 leaf spring assemblies
• Specifically tuned for driver-side fitment in Carli leveling configurations

Fits 2003-2013 RAM 2500 and 2003-2023 RAM 3500 4WD trucks.

The Carli Suspension Progressive Add-A-Pack is engineered to transform the rear ride quality of your heavy-duty RAM. By replacing the stiff, factory-installed overload leaf with a multi-leaf progressive pack, this system provides significantly better small-bump compliance and a smoother unladen ride. It allows the rear suspension to cycle more naturally through its travel without the harsh engagement typical of the stock overload spring, all while maintaining the vehicle’s original towing and hauling capabilities.

• Replaces factory overload leaf with a multi-leaf progressive spring rate
• Eliminates the harsh engagement of the factory overload for better ride comfort
• Direct bolt-on installation into the factory leaf spring stack
• Maintains factory payload and towing capacity for heavy-duty use
• Optimized for use with Carli Suspension leveling and lift systems

Fits select 2005-2023 Ford F-250 and F-350 4x4 models.

The Carli L18HD Heavy Duty Full Progressive Leaf Spring Pack is engineered to replace the rigid factory leaf springs, providing a significant improvement in ride quality without sacrificing the heavy-duty hauling capabilities of your Super Duty. By using a multi-leaf progressive design, these springs offer a supple initial rate to soak up small road chatter while ramping up support as the suspension compresses under load. This specific HD pack is designed for trucks that consistently carry weight or require a more robust rear suspension setup than a standard progressive pack.

• Provides approximately 1 inch of rear lift over stock height
• Full leaf pack replacement (not an add-a-leaf) for superior travel and damping
• Progressive spring rate design for improved unloaded ride and loaded stability
• Heavy-duty construction specifically tuned for F-250 and F-350 4x4 applications
• Direct bolt-on fitment using factory mounting locations
• Manufacturer Part Number: L18HD

Fits 2005-2023 Ford F250 and F350 4x4 trucks.

The Carli Suspension L18 Full Progressive Leaf Spring Pack is engineered to transform the rear ride quality of the Ford Super Duty platform. By replacing the stiff factory leaf pack with a multi-leaf progressive design, this system eliminates the harsh feedback and "kick" typically associated with heavy-duty trucks. This pack provides approximately 1 inch of lift, leveling the stance while significantly improving suspension travel and compliance.

Built to handle both daily driving and off-road terrain, the progressive rate ensures that the initial stroke is supple enough to soak up small chatter, while the deeper layers provide the necessary support for larger impacts. This is a direct-replacement performance upgrade for the OE rear springs on 4WD models, designed to work in harmony with Carli tuning for a balanced, controlled ride.

• Provides approximately 1 inch of rear lift
• Full progressive multi-leaf design for superior ride comfort
• Replaces harsh factory leaf spring packs
• Improves rear wheel travel and traction
• Fits 4x4 Super Duty models
• Manufacturer Part Number: L18

Fits 2017-2023 Ford F250 and F350 4x4 trucks.

The Carli Suspension L70 Full Progressive Leaf Spring Pack is engineered to replace the rigid factory rear springs, providing a significant upgrade in ride quality and suspension travel. By utilizing a multi-leaf, progressive-rate design, these springs offer a softer initial rate for daily driving comfort while increasing resistance as the suspension compresses to handle heavy loads and off-road impacts.

This leaf pack provides approximately 3 inches of lift, leveling the vehicle's stance when paired with matching front suspension upgrades. The progressive nature of the L70 pack reduces the jarring "kicks" common in heavy-duty F-Series trucks, delivering a more controlled and predictable feel both on and off the pavement. This kit is a complete replacement for the OE leaf assembly.

• Manufacturer Part Number: L70
• Product Line: Full Progressive Leaf Spring Pack
• Lift Height: 3 inches
• Design: Multi-leaf progressive rate
• Fitment: 2017-2023 Ford F250/F350 4x4 models
• Includes: Complete rear leaf spring packs (pair)

Fits 2013-2023 Ram 3500 4x4 trucks.

The Carli Suspension Atlas Full Progressive Leaf Spring pack is engineered to transform the heavy-duty ride of your Ram 3500. By replacing the entire factory leaf spring assembly with a custom-tuned progressive rate pack, these springs significantly reduce the harshness and "bucking" associated with the stock OE rear end. This V056 spring pack provides 1 to 2 inches of lift, allowing for increased suspension travel and a much more composed feel over washboards and highway expansion joints without sacrificing the truck's versatility.

• Provides 1-2 inches of rear lift (application dependent)
• Full progressive design for superior small-bump compliance and ride quality
• Reduces the high spring rate of factory heavy-duty packs
• Direct bolt-on replacement for the factory leaf assembly
• Manufacturer Part Number: V056

Fits 2013-2023 Ram 3500 4x4 trucks.

The Carli Suspension L46 Full Progressive Leaf Spring pack is engineered to significantly improve the ride quality of your heavy-duty Ram. While factory leaf springs are tuned for maximum payload at the expense of comfort, this full replacement pack utilizes a multi-leaf, progressive design. By using more, thinner leaves, the spring rate increases gradually as the suspension compresses, providing a supple feel over small road chatter while maintaining the support required for heavy hauling and towing.

• Complete replacement for the factory rear leaf spring assembly
• Delivers approximately 1 to 2 inches of rear lift depending on configuration
• Progressive spring rate improves off-road articulation and street comfort
• Reduces the harsh "kick" common with unladen heavy-duty trucks
• Designed specifically for 4WD Ram 3500 models
• Manufacturer Part Number: L46

Fits 2003-2012 Ram 2500 and 3500 4WD trucks.

The Carli Full Progressive Leaf Spring pack is engineered to transform the ride quality of your heavy-duty Ram. By replacing the harsh factory leaf stack and lifting block with a custom-tuned multi-leaf pack, these springs help eliminate the rear-end bucking common on unladen trucks. The progressive rate design allows the suspension to remain supple over small road chatter while ramping up support as the springs compress under load or during articulation.

• Provides approximately 1 inch of rear lift height
• Multi-leaf construction for a smoother, more linear spring rate
• Reduces axle wrap and improves rear-wheel traction
• Designed to replace both the factory leaf springs and the lifting blocks
• Manufacturer Part Number: K30

Correct your suspension geometry and restore steering stability with the ARB Old Man Emu Caster Correction Bushing Kit, engineered specifically for the Suzuki Jimny. When installing a suspension lift on a solid-axle vehicle like the Jimny, the change in radius arm angle rotates the axle housing, reducing positive caster. This often results in "flighty" steering, poor self-centering, and a lack of straight-line stability.

This kit replaces the factory front radius arm bushings with specialized offset bushings. By realigning the axle to its optimal position, these bushings restore the caster angle necessary for predictable handling and reduced tire wear. Built to withstand the rigors of off-road use, this kit is a critical upgrade for any lifted Jimny to maintain OE-level driving dynamics.

• Restores positive caster angle on lifted Suzuki Jimny models
• Improves steering return-to-center and straight-line tracking
• High-durability construction designed for heavy off-road articulation
• Essential for correcting geometry after a suspension lift

Fits 1980-1985 Toyota Pickup and 1984-1985 4Runner (DLX, SR5, and Base models).

Skyjacker Softride front leaf springs are engineered to provide a 7-inch lift while maintaining superior ride quality on and off the trail. Unlike standard leaf packs that can feel stiff or bouncy, these progressive multileaf packs are constructed from high-grade American steel and shot-peened with hard steel pellets at high velocities. This shot-peening process compresses the steel surface, significantly increasing tensile strength and longevity while allowing for maximum wheel travel.

To ensure smooth articulation, Skyjacker uses bolt-style spring clips that eliminate the friction and binding common with traditional C-style bend clips. Each leaf is tapered along its entire length, allowing for more flex at the ends and distributing the load more evenly to prevent leaf-to-leaf digging and premature wear.

• 7-inch front lift height for increased ground clearance
• Progressive multileaf pack design for improved ride quality and flex
• Shot-peened American steel construction for maximum tensile strength
• Tapered leaf ends for even load distribution
• Bolt-style spring clips reduce friction and prevent binding
• Load capacity equal to or greater than original equipment
• Manufacturer Limited Lifetime Warranty

Fits 1980-1985 Toyota Pickup and 1984-1985 4Runner models.

Skyjacker Softride front leaf springs are engineered to provide 5 inches of lift while maintaining superior ride quality and off-road articulation. Unlike standard lift springs that can feel stiff and unforgiving, Softride springs are constructed from high-grade American steel and feature a progressive multileaf design. Each leaf is shot-peened with high-velocity steel pellets to compress the surface, significantly increasing tensile strength and extending the spring's service life.

These packs utilize bolt-style spring clips rather than restrictive C-style clips to eliminate friction and binding during suspension travel. The leaves are tapered over their entire length, allowing for greater flex at the ends and preventing individual leaves from digging into one another. This design ensures that load capacity remains equal to or greater than original equipment while providing the clearance needed for larger tires and improved approach angles.

• Lift Height: 5 Inches
• Position: Front
• Material: Shot-peened American Steel
• Design: Progressive Multileaf Pack
• Clips: Bolt-style to reduce friction and binding
• Performance: Load capacity equal to or greater than OE
• Warranty: Limited Lifetime Warranty

Fits 1980-1985 Toyota Pickup and 4Runner models.

Skyjacker Softride front leaf springs are engineered to provide a 3-inch lift while maintaining superior ride quality and articulation. Unlike standard springs that can feel stiff or prone to sagging, these Softride packs are constructed from American steel and undergo a high-velocity shot-peening process. This compresses the steel’s surface to increase tensile strength, allowing for maximum wheel travel without compromising the longevity of the spring pack.

To reduce binding and internal friction, Skyjacker utilizes bolt-style spring clips rather than traditional "C" style bend clips. The individual leaves are tapered across their entire length to ensure even load distribution and prevent leaves from digging into one another, resulting in a more predictable, flexible suspension response during off-road maneuvers.

• Provides 3 inches of front lift height
• Progressive multi-leaf pack design for improved flex and comfort
• Shot-peened American steel construction for increased durability
• Bolt-style spring clips eliminate friction and binding
• Tapered leaf ends distribute weight evenly across the pack
• Load capacity meets or exceeds original equipment specifications
• Limited Lifetime Warranty

Fits select 1974-1991 Jeep Cherokee, Grand Wagoneer, J10, J20, and Wagoneer models.

Skyjacker Softride leaf springs are engineered to provide the lift you want without the harsh ride typically associated with heavy-duty suspension. By utilizing high-grade American steel and specific arch geometries, these springs maintain vigorous off-road handling while delivering the smooth street characteristics required for a daily driver or weekend cruiser.

Each spring is preset and formed from 5160H chromium alloy steel to ensure consistent spring rates and prevent sagging over time. Unlike standard springs that use cinch-style clips, Skyjacker uses bolt-style spring clips to eliminate inter-leaf friction, allowing the pack to compress and rebound more fluidly. A durable powder-coated finish provides long-lasting resistance against corrosion and trail debris.

• Lift Height: 4 inches
• Position: Rear
• Material: 5160H Chromium Alloy American Steel
• Finish: Black Powder Coat
• Clip Style: Friction-reducing bolt clips
• High tensile strength for increased durability and service life
• Limited Lifetime Warranty

Fits 1974-1991 Jeep Cherokee, Grand Wagoneer, Wagoneer, J10, and J20. These Skyjacker Softride front leaf springs are engineered to provide a 4-inch lift while significantly improving ride quality over traditional leaf designs.

Skyjacker utilizes American steel and a progressive multileaf pack design to ensure load capacity meets or exceeds OE standards. To maximize durability and performance, each leaf is shot-peened with hard steel pellets at high velocities. This process compresses the steel surface, increasing tensile strength and allowing for maximum wheel travel without compromising the spring's service life. Unlike standard springs that use friction-inducing bend clips, Softride springs feature bolt-style clips to prevent binding.

• Fits 1974-1991 Jeep SJ and J-Series platforms
• 4-inch lift height for increased ground clearance and tire fitment
• Constructed from high-tensile American steel
• Shot-peened leaves for enhanced fatigue life and ride quality
• Tapered leaf ends distribute loads evenly and increase flex
• Bolt-style spring clips eliminate friction and binding
• Progressive multileaf pack design
• Limited Lifetime Warranty

Fits 1976-1986 Jeep CJ5, CJ7, and Scrambler.

Skyjacker Softride front leaf springs are engineered to provide significantly improved ride quality and off-road articulation without compromising durability. Each spring is manufactured from high-grade American steel and undergoes a rigorous shot-peening process. By bombarding the steel with hard pellets at high velocities, the surface is compressed to increase tensile strength, allowing for maximum wheel travel while extending the service life of the spring.

Unlike standard springs that use "C" style bend clips—which can cause binding and friction—Skyjacker utilizes bolt-style spring clips to allow the leaves to move freely. The leaves are tapered over their entire length to distribute loads more evenly and create more flex at the leaf ends, preventing individual leaves from digging into those above them for a smooth, progressive suspension feel.

• Lift Height: 3.5-4 inches
• Construction: Progressive multileaf pack
• Material: Shot-peened American steel
• Spring Clips: Bolt-style to eliminate friction and binding
• Tapered leaves for increased flex and even load distribution
• Load capacity: Equal to or greater than OE
• Limited Lifetime Warranty