Fits 2005-2023 Chrysler 300 and Dodge Challenger, Charger, and Magnum models.

The Ridetech HQ Series Coilover Kit provides a comprehensive suspension upgrade for Mopar LX, LC, and LD platform vehicles. Designed for drivers who demand both a lowered stance and refined handling, the "Handling Quality" (HQ) series features single-adjustable monotube shocks that allow you to fine-tune rebound damping with 24 distinct settings. This kit replaces factory dampers and springs with high-performance units matched for improved steering response and reduced body roll.

• Monotube Design: Impact-forged aluminum shock bodies provide superior oil capacity and consistent damping performance.
• Adjustable Rebound: Top-mounted adjustment knobs allow for precise tuning of the shock's extension stroke to suit your driving environment.
• Threaded Bodies: Allows for fine-tuning of ride height and corner weight balancing.
• High-Quality Springs: Includes specific rate coil springs designed to complement the valving of the HQ shocks.
• Application-Specific: Engineered to bolt directly into factory mounting points without major modifications.

Fits select 1967-1974 Buick Apollo, Chevrolet Camaro and Nova, Oldsmobile Omega, and Pontiac Firebird and Ventura models.

The Ridetech TruTurn Steering System is an engineered solution designed to correct the inherent suspension geometry flaws found in factory 1967-1974 GM F-Body and X-Body platforms. This package addresses common issues like bump steer and poor camber gain, providing the precise steering response and stability required for modern performance driving. By utilizing revised spindle geometry and corrected steering arm positioning, this system allows for improved tire clearance and a more aggressive alignment setup.

• Includes specifically designed spindles to optimize roll center and camber gain
• Corrects bump steer throughout the suspension travel for predictable handling
• Eliminates steering linkage interference common with wider front wheels and tires
• Bolt-on installation designed to work with factory mounting points
• Complete package engineered to integrate seamlessly with the TruTurn steering arms

Fits 1967-1969 Chevrolet Camaro (Base, RS, SS, Z28) and 1967-1969 Pontiac Firebird (Base, 326, 350, 400, Sprint, Trans Am).

The Ridetech HQ Series Coil-Over system provides a complete suspension overhaul for first-generation F-Body platforms, replacing aged factory components with engineered geometry and modern damping technology. This package eliminates the guesswork of matching spring rates and shock valving, delivering an aggressive lowered stance with modern drivability and precision handling.

• HQ Series Coil-Overs: Built with impact-forged aluminum bodies and a monotube design. Rebound-adjustable knobs allow for fine-tuning the damping to suit your driving style.
• Tubular StrongArms: Upper and lower arms feature injection-molded Delrin bushings with 13% Teflon to reduce deflection and stiction. Geometry is optimized for increased caster to improve high-speed stability.
• Tall Spindles: Engineered to induce more negative camber gain for maximum tire contact during cornering, featuring a 2-inch pin drop to maintain suspension travel at lower ride heights.
• Bolt-On 4-Link: Dramatically improves rear traction and lateral stability without requiring floor pan modifications. Includes double-adjustable links with R-Joint rod ends for low-friction, quiet operation.
• Front Sway Bar: Reduces body roll and increases clearance for wider front tires. Includes anodized billet aluminum frame straps and low-friction bushings.

Fits 1964-1967 GM A-Body vehicles including Chevrolet Chevelle and El Camino, Pontiac GTO and LeMans, Oldsmobile Cutlass and 442, and Buick Skylark.

The Ridetech MuscleBar is engineered to significantly reduce body roll and improve the handling characteristics of your classic GM A-Body. Designed as a high-performance upgrade, this rear sway bar features an adjustable rate, allowing you to fine-tune your suspension's lateral stability to match your specific driving needs. This MuscleBar is versatile enough to be used with factory-style trailing arms or Ridetech aftermarket trailing arms.

Each kit includes a precision-formed sway bar and all necessary heavy-duty mounting hardware to ensure a secure, long-lasting installation. By replacing the often-undersized factory components, the MuscleBar provides more consistent tire contact patches during aggressive cornering.

• Manufacturer Part Number: 11239122
• Adjustable rate bar for customized suspension tuning
• Fits stock or Ridetech trailing arms
• Heavy-duty axle and frame brackets included
• Includes adjustable end links, u-bolts, and all necessary hardware
• Direct-fit application for 1964-1967 GM A-Body platforms

Fits 1965-1970 Chevrolet B-Body models including Bel Air, Biscayne, Brookwood, Caprice, Estate, Impala, Kingswood, and Townsman.

The Ridetech MuscleBar Rear Sway Bar is engineered to significantly reduce body roll and improve the cornering stability of your classic full-size Chevrolet. This system replaces the often undersized or missing factory sway bar with a high-performance adjustable rate bar, allowing you to fine-tune your suspension's roll stiffness. The kit includes Ridetech's Posi-Link end links, which provide a direct, solid connection between the bar and the chassis, eliminating the flex and delay associated with traditional rubber or polyurethane bushings.

Designed for ease of installation and versatility, this MuscleBar is compatible with both factory trailing arms and Ridetech performance trailing arms. Each kit is supplied with all necessary heavy-duty mounting hardware for a secure, bolt-on upgrade.

• Adjustable rate design to customize handling and balance
• Posi-Link end links eliminate deflection for immediate response
• Compatible with stock or Ridetech trailing arms
• Comprehensive kit includes axle brackets, frame brackets, and U-bolts
• Precision-bent for exact fitment on 1965-1970 GM B-Body platforms
• Manufacturer Part Number: 11289102

Fits select 2014-2019 Chevrolet Silverado 1500 and GMC Sierra 1500 (including LD and Limited models) equipped with factory stamped steel or aluminum control arms.

Ridetech StrongArms are engineered to improve suspension geometry and handling while providing significantly more strength than factory units. These front upper control arms are constructed from high-quality tubular steel and finished in a durable black powder coat to resist corrosion and road debris. They serve as a direct-fit replacement for worn or weak OE components, optimizing ball joint angles for better performance in both 2WD and 4WD applications.

• Precision-formed tubular steel construction for superior strength and durability
• Includes pre-installed high-quality ball joints and Delrin bushings for reduced deflection
• Optimized geometry designed for trucks with OE stamped or aluminum arms
• Durable black powder-coated finish for long-lasting protection
• Bolts directly to factory mounting points
• Manufacturer Part Number: 11713699

Included: Pair of front upper control arms, ball joints, and Delrin bushings.

Fits select 1965-1979 Ford F-100 and F-150 pickups.

These Ridetech motor mounts are engineered specifically for 1965-1979 Ford F-100 and F-150 trucks equipped with Ridetech suspension systems. Designed to accommodate Small Block Ford (SBF) engines, these mounts provide the precise alignment and structural support required to integrate your powertrain with an upgraded chassis. They replace factory-style mounting points to ensure proper engine height and clearance.

• Optimized for Small Block Ford (SBF) engine configurations
• Designed specifically for use with Ridetech F-100 and F-150 suspension kits
• Heavy-duty construction for superior torque management and vibration dampening
• Manufacturer Part Number: 12319501

Fits 1965-1979 Ford F-100 and F-150 2WD models across multiple trims including Base, Custom, Ranger, and XLT.

Enhance the stance and handling of your classic Ford truck with this pair of Ridetech HQ Series Front Coilovers. Designed specifically for 2WD 1965-1979 F-100 and F-150 applications, these coilovers are engineered for use with Ridetech suspension components to provide a modern ride quality and precise rebound adjustment. The HQ Series (Handling Quality) allows you to fine-tune the dampening to match your driving preferences and vehicle load requirements.

• Direct Fit: Designed for use with Ridetech suspension systems on select 1965-1979 Ford 2WD trucks.
• Rebound Adjustable: HQ Series shocks feature internal valving with adjustable rebound for custom-tailored handling.
• Complete Front Set: Includes a pair of high-performance shocks, springs, spring mounts, and bearing spacers.
• Durable Construction: Monotube design for consistent damping and long-term reliability under varying road conditions.
• MPN: 12313510

Fits select 1978-1988 Buick Regal, Chevrolet Monte Carlo, Malibu, El Camino, GMC Caballero, Oldsmobile Cutlass, and Pontiac Grand Prix (G-Body).

Eliminate steering slop and restore front-end precision with this comprehensive Ridetech steering linkage kit. Designed to replace worn-out factory components, this kit upgrades the entire steering assembly from the pitman arm to the knuckles. The inclusion of billet aluminum tie rod adjusters provides a significant upgrade over factory stamped steel sleeves, offering easier adjustment and increased durability during performance driving or alignment tuning.

• Replaces critical wear items to restore factory steering geometry and feel
• Billet aluminum tie rod adjusters offer superior strength and precision over OE sleeves
• Designed as a direct-fit replacement for the 1978-1988 GM G-Body platform
• Manufacturer Part Number: 11329570

Kit Includes:

• Idler Arm
• Center Link
• Inner Tie Rods
• Outer Tie Rods
• Billet Tie Rod Adjusters

Fits select 2005-2023 Dodge Charger, Challenger, Magnum, and Chrysler 300 models. Ridetech HQ Series Rear Coil-Overs provide a significant performance upgrade for the Mopar LX, LC, and LD platforms, allowing for precise fine-tuning of ride quality and handling characteristics. These rear coil-overs feature a rebound-adjustable mono-tube design, enabling you to dial in the damping to suit your specific driving style and vehicle weight.

• Rebound adjustable shocks for precise suspension tuning
• Includes high-tensile coil springs and robust spring mounts
• Delrin spring washers prevent binding and ensure quiet operation
• Mono-tube design for consistent, fade-free performance
• Direct replacement for factory rear shock and spring assemblies
• Manufacturer Part Number: 13046210

Each kit is supplied as a pair and includes all necessary hardware for installation: two rebound-adjustable shocks, two coil springs, spring mounts, and Delrin spring washers.

Fits 1965-1970 Chevrolet Bel Air, Biscayne, Brookwood, Caprice, Estate, Impala, Kingswood, and Townsman.

Ridetech StrongArm front upper control arms provide a significant upgrade over factory stamped-steel components by improving suspension geometry and increasing structural rigidity. These tubular arms are engineered to optimize caster and camber curves for better handling and more consistent tire contact. Each arm is precision-welded and finished in a durable satin black powder coat to resist corrosion and maintain a professional appearance.

• Tubular steel construction for superior strength and reduced deflection.
• Low-friction Delrin bushings ensure smooth suspension travel without the binding or squeaking typical of polyurethane.
• Includes pre-installed ball joints and cross shafts for a straightforward bolt-on installation.
• Designed to work with factory or aftermarket steering knuckles and shocks.
• Satin black powder-coated finish for long-lasting durability.
• Manufacturer Part Number: 11283699

Each set includes a complete pair of front upper control arms with all necessary bushings, ball joints, and cross shafts for a complete installation.

Fits 1964-1967 GM A-Body vehicles, including Buick Gran Sport, Skylark, and Special; Chevrolet Chevelle and El Camino; Oldsmobile 442, Cutlass, and F85; and Pontiac GTO, LeMans, and Tempest.

Ridetech Rear Upper StrongArms (MPN 11236699) are engineered to replace the weak factory stamped steel arms, providing a significant upgrade in strength and suspension geometry. These tubular arms feature an adjustable design that allows for precise pinion angle correction, which is critical for maintaining drivetrain longevity on lowered vehicles or those with modified ride heights. Each arm is equipped with Ridetech’s patented R-Joint technology, offering low-friction movement and high articulation without the noise or binding associated with traditional bushings or rod ends.

• Construction: Heavy-duty tubular steel for maximum rigidity.
• Adjustment: Threaded ends allow for easy length adjustment to set pinion angle.
• R-Joint Bushings: Provides smooth, 3-axis movement and long service life.
• Finish: Durable satin black powder coat for corrosion resistance.
• Installation: Direct bolt-on replacement for original equipment.
• Includes: One pair of adjustable rear upper control arms with R-Joints and necessary hardware.

Fits select 1960-2019 Chevrolet, GMC, Ford, and Mercury models. These Ridetech HQ Series Rear ShockWaves provide an integrated air spring and shock solution for improved ride quality and adjustable handling. Part of the 8000 Series, this kit features a 5.2-inch stroke shock paired with a 5-inch diameter rolling sleeve air spring to deliver a smooth, compliant ride with the benefit of adjustable air pressure for varying loads.

• Manufacturer Part Number: 21150801
• Series: HQ (Handling Quality) 8000 Series
• Stroke: 5.2-inch shock travel
• Air Spring: 5-inch diameter rolling sleeve
• Mounting: 1.7-inch eye mount with .625-inch bearings
• Adjustability: Integrated rebound damping adjustment
• Included Hardware: Pair of ShockWaves, 1/2-inch bearing spacers, and 5/8-inch bearing spacers

The HQ Series utilizes impact-forged aluminum bodies and adjustable valving, allowing you to fine-tune the rebound setting to match your driving style and vehicle weight. The rolling sleeve design is ideal for applications where space is limited but maximum travel and ride comfort are required.

Fits select 1960-1964 Ford Galaxie, Country Sedan, and Ranch Wagon, plus 1961-1964 Mercury Monterey, Marauder, and Colony Park models.

Ridetech HQ (Handling Quality) Series ShockWaves replace your factory front springs and shocks with an integrated air suspension solution designed for improved handling and ride height adjustability. These units feature an impact-forged aluminum shock body and an internal monotube design for consistent damping and superior heat dissipation. With 24 levels of rebound adjustment, you can precisely tune the suspension to your driving preference, whether you are looking for a soft cruising ride or firm cornering performance.

• Includes one pair of front HQ Series ShockWaves
• Integrated 1/4" airline fittings
• Rebound-adjustable shocks for custom-tuned damping
• High-strength air springs provide reliable load support
• Billet aluminum construction for long-term durability
• Manufacturer Part Number: 12162401

Fits 1967-1970 Ford Mustang models including Base, Boss 302, Boss 429, Grande, Mach 1, and Shelby GT-350/500/500KR.

Upgrade your classic Ford Mustang’s rear suspension with the Ridetech HQ Series Rear CoilOvers. These Handling Quality (HQ) shocks are specifically engineered for use with Ridetech 4-Link rear suspension systems, providing a significant improvement in ride quality and cornering performance. The monotube design offers consistent damping, while the rebound adjustment allows you to fine-tune the suspension to your specific driving preferences and vehicle weight.

• Specifically designed for use with Ridetech 4-Link rear suspension systems.
• Adjustable rebound damping to dial in handling and ride comfort.
• Delrin spring washers included to eliminate spring binding and noise.
• High-tensile steel coil springs included for reliable performance and stance.
• Manufacturer Part Number: 12106510

What's Included: (2) Rebound adjustable shocks, (2) coilover springs, spring mounts, and Delrin spring washers.

Fits 1964-1988 GM A-Body and G-Body vehicles including Chevrolet Chevelle, El Camino, Malibu, and Monte Carlo; Buick Regal, Skylark, and GS; Oldsmobile Cutlass and 442; and Pontiac GTO, Grand Prix, and LeMans.

The Ridetech R-Joint rear upper control arm bushing assembly is a high-performance replacement for restrictive factory rubber bushings. This kit is specifically designed to press directly into the rear axle housing, providing a low-friction, articulated pivot point that eliminates the suspension binding common in triangulated 4-link systems. By combining the lateral stability of a rod end with the quiet, smooth operation of a traditional bushing, the R-Joint improves handling and traction without increasing noise, vibration, or harshness (NVH).

• Part Number: 11227298
• Housing Type: Designed to press into factory axle housing mounting points
• Joint Technology: R-Joint low-friction articulated bearing
• Material: Self-lubricating cage with stainless steel ball
• Quantity: Sold as a pair
• Application: Rear Upper Control Arm (Axle Side)

Fits select 1965-1966 Chevrolet Bel Air, Biscayne, Caprice, and Impala.

The Ridetech HQ Series Rear Coilover and StrongArm System (MPN 11296210) is a comprehensive suspension upgrade designed to modernize the handling and ride quality of full-size GM B-Body vehicles. This system replaces the factory rear springs and shocks with adjustable coilovers and heavy-duty tubular control arms for precise tuning and improved geometry.

The included HQ (Handling Quality) shocks feature impact-forged aluminum bodies and a 24-position rebound adjustment, allowing you to dial in the damping to suit your driving style. The kit is rounded out with Ridetech StrongArms, which offer superior strength over factory stamped steel arms, and an adjustable panhard bar to keep the rear axle centered at your new ride height.

• HQ Series Coilovers: Features adjustable rebound damping and specifically tuned spring rates for optimized performance.
• StrongArms: Upper and lower tubular rear control arms provide increased strength and improved suspension articulation.
• Adjustable Panhard Bar: Allows for precise centering of the rear axle housing within the chassis.
• Installation Components: Includes all necessary brackets, spacers, and high-grade hardware for a bolt-on installation.
• MPN: 11296210

Fits select 1965-1966 Chevrolet Bel Air, Biscayne, Caprice, and Impala.

The Ridetech StrongArms kit (MPN: 11296699) provides a significant upgrade to your B-Body's rear suspension geometry and strength. This kit includes one adjustable tubular upper control arm and one adjustable panhard bar, designed to replace factory-stamped steel components that are prone to deflection. By using tubular steel construction and an integrated R-Joint, this setup provides bind-free articulation and more precise axle control for improved handling and traction.

The adjustable design allows for precise setting of the rear pinion angle and ensures the rear axle is perfectly centered under the chassis, which is critical for vehicles with lowered ride heights or wide tire fitments. The included R-Joint rod end combines the best attributes of a rod end and a poly bushing, offering low-friction movement without the noise or vibration common in race-only components.

• Includes 1 adjustable tubular upper control arm
• Includes 1 adjustable panhard bar
• Features R-Joint rod end for smooth, bind-free movement
• Durable satin black powder-coated finish for corrosion resistance
• Direct replacement for factory rear suspension components
• Manufacturer Part Number: 11296699

Fits select 2007-2019 Chevrolet Silverado 1500 and GMC Sierra 1500 trucks (including 2019 Silverado LD and Sierra 1500 Limited).

Upgrade your truck's rear suspension with the Ridetech HQ (Handling Quality) Series Coilover system. These rear coilovers are designed specifically for use with the Ridetech 4-Link system, providing a massive improvement in ride quality and handling characteristics over factory leaf springs. Each shock features rebound adjustment, allowing you to fine-tune the damping with a simple turn of a knob to match your specific driving style or load conditions.

Built with precision components, this kit includes Delrin spring washers that eliminate spring bind and friction during compression, ensuring smooth and quiet operation. Whether you are building a street performer or a dedicated cruiser, these coilovers deliver the control and stance your truck deserves.

• Specifically engineered for use with Ridetech 4-Link systems
• HQ Series shocks feature 24-position rebound adjustment
• Includes high-tensile coil springs and mounting hardware
• Delrin spring washers reduce friction and noise
• Direct replacement components for 4-Link conversion
• Manufacturer Part Number: 11706510

The Ridetech 90007076 rolling sleeve air spring is a compact suspension solution engineered for custom rear applications where space is at a premium. Built with a Firestone 7076 bellows, this 4-inch diameter spring provides a progressive rate that helps smooth out road harshness while maintaining a consistent 800 lb load capacity at 100 psi.

• Manufacturer Part Number: 90007076
• Diameter: 4.0"
• Air Port Size: 1/8" NPT
• Load Capacity: 800 lbs @ 100 psi
• Compressed Height: 3.5"
• Ride Height: 5.0" to 6.0"
• Maximum Extension: 9.0"

This air spring is designed for durability and performance, featuring a broad travel range from 3.5 inches fully compressed up to 9 inches at full extension. It is an ideal replacement or upgrade for builders looking for reliable rolling sleeve performance in a narrow footprint.

Designed for precision adjustments, the Ridetech CoilOver Spanner Wrench is an essential tool for any enthusiast tuning their suspension setup. This tool fits select 1955-2020 Buick, Chevrolet, Chrysler, Dodge, Ford, GMC, and Oldsmobile models equipped with Ridetech coilover systems.

This spanner wrench allows for controlled adjustment of the spring seat and locking collars, enabling you to set ride height and corner balance without damaging the aluminum components. Whether you are fine-tuning a classic 1955 Bel Air or a modern 2020 Chrysler 300, this tool provides the leverage needed to overcome spring tension safely and effectively.

• Specifically engineered for Ridetech CoilOver shock systems
• Prevents marring or slipping on adjustment nuts and locking collars
• Essential for ride height and spring preload adjustments
• Heavy-duty construction for professional-grade durability
• Manufacturer Part Number: 85000000

Fits select 1967-1974 Buick Apollo, Chevrolet Camaro and Nova, Oldsmobile Omega, and Pontiac Firebird and Ventura.

The Ridetech Subframe Bushing Kit (MPN 81001000) is designed to replace soft, worn-out factory rubber bushings that permit unwanted subframe movement. By providing a secure, rigid connection between the subframe and the vehicle chassis, this kit eliminates the flexing that compromises suspension geometry and steering precision during performance driving. This is an essential upgrade for maintaining alignment accuracy and improving overall handling response.

• Reduces subframe deflection and chassis flex for more predictable handling
• Maintains consistent suspension geometry under heavy cornering loads
• Designed to replace factory OE rubber bushings
• Engineered specifically for 1967-1974 GM F-Body and X-Body platforms
• Includes all necessary bushings and installation hardware
• Manufacturer Part Number: 81001000