This Stainless Bros 2in 90-degree elbow pipe is a high-grade fabrication component engineered for custom exhaust systems, intake piping, and cooling setups. Manufactured from SS304 stainless steel, it provides excellent corrosion resistance and durability against high-heat cycles, preventing the scaling and structural degradation common in lower-grade alloys.

Designed for professional fabricators, this elbow allows for precise routing in tight engine bays or under-chassis configurations. The 2-inch outer diameter is a versatile choice for smaller displacement exhaust systems, custom wastegate dump tubes, or intercooler piping where consistent flow is required.

• Material: T304 Stainless Steel
• Outer Diameter: 2.00" (50.8mm)
• Bend Angle: 90 Degrees
• Finish: Raw / Natural
• Application: Exhaust, Intake, Intercooler, and Coolant Fabrication

This Stainless Bros 90-degree mandrel bend elbow is designed for precision fabrication where space is at a premium. Featuring a 1D radius—where the centerline radius is equal to the tube's outer diameter—this component allows for extremely tight routing in engine bays and chassis tunnels. The mandrel bending process ensures a uniform diameter throughout the entire bend, preventing the flow restrictions or wall thinning associated with standard crush bends.

Constructed with a 16-gauge (.065-inch) wall thickness, this elbow provides the structural integrity needed for custom exhaust manifolds, downpipes, and intake systems. The included straight legs offer additional material for trimming to your exact specifications before TIG welding into your assembly.

• Tube Diameter: 2.13in OD
• Bend Angle: 90 Degrees
• Centerline Radius: 1D (Tight Radius)
• Wall Thickness: 16GA (.065in)
• Construction: Mandrel Bent
• Application: Custom exhaust, intake, and coolant plumbing

The MBRP XP Series universal muffler provides a durable solution for custom exhaust fabrication and sound tuning. Engineered as a canister-style muffler, it allows builders to dial in a specific exhaust note while maintaining the high-flow characteristics necessary for performance applications.

Constructed from T409 stainless steel, this muffler is designed to withstand the thermal stress and environmental conditions of high-exhaust-gas-temperature environments. The 5-inch internal diameter ensures minimal restriction for heavy-duty or high-displacement systems, making it a reliable choice for custom exhaust setups requiring a large-bore flow path.

• Product Line: XP Series
• Material: T409 Stainless Steel
• Inlet/Outlet Diameter: 5 in. (Inside Diameter)
• Body Diameter: 5 in.
• Body Length: 24 in.
• Overall Length: 31 in.
• Configuration: Single Canister Style

This MBRP Installer Series universal muffler is designed for custom exhaust fabrication and high-flow applications. Built with an aluminized finish, it provides a cost-effective solution for tuning your vehicle's exhaust note while maintaining a straight-through flow design to help reduce backpressure. This 5-inch ID unit is ideal for diesel or heavy-duty gasoline applications requiring maximum diameter and a 31-inch footprint.

• Manufacturer: MBRP
• Series: Installer Series
• Inlet/Outlet Diameter: 5 in.
• Body Diameter: 5 in.
• Body Length: 24 in.
• Overall Length: 31 in.
• Configuration: Single Inlet / Single Outlet
• Material: Aluminized Steel

Constructed from rugged T409 stainless steel, this MBRP XP Series universal muffler is engineered for custom exhaust fabrications that require a balance of durability and refined sound. The high-quality steel construction is specifically designed to withstand the thermal stress and road debris common in high-mileage applications. Featuring a single 3-inch inlet and dual 2.5-inch outlets, this muffler provides a smooth transition for exhaust gases, delivering a deep, mild tone that enhances the vehicle's character without the drone of a race-oriented system.

• Inlet Diameter: 3 in.
• Outlet Diameter: Dual 2.5 in.
• Body Dimensions: 6 in. x 20 in.
• Overall Length: 30 in.
• Material: T409 Stainless Steel
• Series: XP Series
• Sound Level: Mild Tone

MBRP universal straight tubing provides a heavy-duty solution for custom exhaust fabrication and exhaust system repairs. This 90-inch section of 1.25-inch diameter tubing allows fabricators to create precise straight runs with the reliability of professional-grade materials.

Constructed from 16-gauge aluminized steel, this tubing offers improved corrosion resistance compared to standard mild steel while maintaining ease of welding and cutting. It is an ideal choice for enthusiasts looking to customize their vehicle's exhaust path or replace worn-out sections of a factory pipe.

• Material: 16-Gauge Aluminized Steel
• Tubing Diameter: 1.25 inches
• Length: 90 inches
• Tubing Style: Straight Pipe
• Fitment: Universal

Fits select 2006-2007 Chevrolet Silverado 2500 HD/3500 and GMC Sierra 2500 HD/3500 Regular Cab models.

This MBRP exhaust extension pipe is engineered to provide a precise fit for heavy-duty Regular Cab trucks, ensuring your exhaust system maintains proper alignment and flow. Constructed from durable T409 stainless steel, this component is built to withstand the heat and corrosive elements typical of diesel and gas exhaust environments, offering a longer service life than standard aluminized steel.

Functioning as an exhaust adapter and extension, this part is designed for owners refining their vehicle's exhaust layout or completing a system installation. It provides the necessary length to bridge gaps in the exhaust stream without compromising the structural integrity of the tubing.

• Material: T409 Stainless Steel
• Application: Regular Cab configurations
• Type: Exhaust Extension Pipe / Adapter
• Direct replacement for specific 2006-2007 heavy-duty GM truck chassis

Fits select 2001-2005 Chevrolet Silverado and GMC Sierra 2500 HD and 3500 (6.6L).

This 4-inch extension pipe is specifically engineered to adapt MBRP exhaust systems S6000AL and S6002AL for use on Regular Cab trucks. Standard exhaust kits are often designed for longer wheelbases; this component provides the precise length needed to ensure a proper fitment on shorter Regular Cab configurations without custom fabrication.

Constructed from heavy-duty aluminized steel, this pipe offers a durable and cost-effective solution for completing your exhaust installation. It maintains the 4-inch diameter of your performance system to ensure consistent exhaust flow and backpressure levels.

• Specifically adapts MBRP S6000AL and S6002AL for Regular Cab trucks
• Diameter: 4-Inch
• Material: Aluminized Steel
• Installation: Adapts existing MBRP systems to factory-style mounting
• Configuration: Designed for Regular Cab models only

Vibrant Performance 304 stainless steel mandrel-bent u-bends provide the dimensional accuracy and material consistency required for high-performance exhaust systems, headers, and custom intake plumbing. This 180-degree tight radius bend is engineered to simplify complex routing in cramped engine bays or chassis locations where space is at a premium.

Constructed from 16-gauge (0.065 inch) 304 stainless steel, this tubing offers excellent corrosion resistance and high-temperature durability. The mandrel bending process ensures a uniform diameter throughout the bend, maintaining optimal exhaust flow and structural integrity. Each piece arrives ready for fabrication, requiring minimal preparation for high-quality TIG or MIG welding.

• Manufacturer Part Number: 2684
• Material: 304 Stainless Steel
• Outside Diameter (O.D.): 2.5" (63.5mm)
• Wall Thickness: 16-Gauge (0.065")
• Bend Angle: 180 Degrees
• Bend Radius: Tight Radius
• Finish: Mill Finish, Mandrel Bent

Constructed from high-grade T304 stainless steel, the Vibrant Performance 13306 90-degree mandrel bend elbow is designed for professional vehicle fabricators who demand precision and aesthetics. Featuring a factory-brushed finish, these elbows require virtually no surface preparation before welding, saving significant time in the shop. The tight 2.0-inch centerline radius (1D) and abbreviated leg lengths allow for compact routing in tight engine bays or chassis tunnels while minimizing material waste.

This mandrel-bent elbow maintains a consistent 2.0-inch outside diameter throughout the bend, ensuring optimal flow characteristics for custom exhaust systems, intake piping, or intercooler plumbing. Its T304 construction provides excellent corrosion resistance and durability under high-heat conditions.

• Material: T304 Stainless Steel
• Finish: Brushed
• Outside Diameter: 2.0 in (50.8 mm)
• Bend Angle: 90 Degrees
• Centerline Radius (CLR): 2.0 in (1D)
• Mandrel bent for uniform wall thickness and flow
• Manufacturer Part Number: 13306

Vibrant Performance T304 stainless steel mandrel bends are engineered for fabricators who require dimensional accuracy and material consistency for custom exhaust systems, headers, and intake plumbing. This 45-degree bend features a 1.5-inch centerline radius, providing a compact profile without the flow restriction or wall thinning often found in standard crush-bent tubing.

Constructed from 16-gauge (0.065") wall thickness T304 stainless steel, this component offers excellent corrosion resistance and high-temperature durability. Each bend is supplied with 6-inch leg lengths, providing ample material for trimming and fitment. The clean surface finish requires minimal preparation before TIG or MIG welding, ensuring a professional result for high-performance fabrication projects.

• Material: T304 Stainless Steel
• Outside Diameter: 1.50"
• Wall Thickness: 16-Gauge (0.065")
• Bend Angle: 45 Degrees
• Centerline Radius: 1.50"
• Leg Lengths: 6" x 6"
• Part Number: 13092

This Ticon 1.75-inch 6061 aluminum mandrel bend is a precision-engineered component designed for high-performance automotive fabrication. With a 45-degree angle and a compact 1.5D radius, this elbow is ideal for routing custom intake piping, intercooler charge pipes, and cooling systems where space is limited and flow efficiency is critical.

Unlike standard crush-bent tubing, this mandrel-bent section maintains a consistent wall thickness and internal diameter throughout the entire curve. This eliminates turbulence and internal restrictions, ensuring maximum airflow or coolant velocity. The 6061 aluminum alloy provides an excellent balance of lightweight performance, corrosion resistance, and superior weldability for professional-grade fabrication projects.

• Material: 6061 Aluminum
• Outside Diameter: 1.75 in
• Bend Angle: 45 Degrees
• Bend Radius: 1.5D (Centerline)
• Construction: Mandrel Bent for uniform flow

This Vibrant mandrel-bent 180-degree U-bend provides fabricators with a high-quality solution for custom exhaust systems, headers, and intake plumbing. Constructed from T304 stainless steel with a 16-gauge wall thickness, this tubing ensures excellent corrosion resistance and material consistency. The mandrel bending process maintains a uniform diameter throughout the radius to maximize flow and reduce turbulence in performance applications.

Engineered for dimensional accuracy, this bend requires minimal preparation for welding. Whether you are building a custom turbo manifold or a unique exhaust exit, Vibrant Performance components deliver the reliability needed for high-stress automotive environments.

• Manufacturer Part Number: 2623
• Material: T304 Stainless Steel
• Outer Diameter (OD): 1.875in (1-7/8in)
• Centerline Radius (CLR): 2.00in
• Wall Thickness: 16-Gauge (0.065in)
• Bend Angle: 180-Degree (U-Bend)
• Construction: Mandrel Bent

The Vibrant 18193 90-degree mandrel bend is engineered for high-performance fabrication, providing a consistent inner diameter throughout the entire radius to maximize flow and minimize turbulence. Constructed from premium 304 stainless steel, this tubing offers excellent corrosion resistance and durability, making it an essential component for custom exhaust systems, headers, intakes, and cooling system plumbing.

• Angle: 90 Degrees
• Outside Diameter (OD): 1.50 inches
• Center Line Radius (CLR): 3.00 inches
• Material: 304 Stainless Steel
• Construction: Mandrel Bent
• Manufacturer Part Number: 18193

Vibrant Performance mandrel bends are designed to meet the rigorous demands of professional fabricators, ensuring precise tolerances for clean welds and reliable fitment in custom automotive applications.

Vibrant Performance 321 Stainless Steel Mandrel Bends are engineered to outperform 304 stainless steel in extreme environments, specifically those involving prolonged, elevated operating temperatures between 800°F and 1500°F (427°C to 816°C). This makes 321 SS highly recommended for high-heat forced induction applications, turbo manifolds, and downpipes. Beyond heat tolerance, 321 stainless steel provides superior resistance to intergranular corrosion and maintains structural integrity under high tensile stress, significantly reducing the risk of stress fractures compared to standard alloys.

• Material: 321 Stainless Steel
• Outside Diameter: 3.000 in.
• Bend Angle: 180 Degrees
• Centerline Radius (CLR): 4.500 in.
• Leg Lengths: 6.000 in. x 6.000 in.
• Wall Thickness: 16 Gauge (0.065 in.)
• Manufacturer Part Number: 13850

Vibrant Performance vertical plane oval pie cuts provide a professional solution for fabricating custom exhaust bends in tight spaces where traditional round tubing lacks necessary clearance. These 3.50-inch nominal tube sections are precision-cut from T304 stainless steel to create a precise 45-degree elbow, allowing fabricators to maintain exhaust flow while navigating chassis constraints.

• Material: T304 Stainless Steel
• Tube Diameter: 3.50 inch (Nominal)
• Total Bend Angle: 45 Degrees
• Orientation: Vertical Plane
• Corrosion-resistant 304SS construction for durability and weldability
• Manufacturer Part Number: 13586

These pie cuts are ideal for high-performance fabrication including custom downpipes and cat-back systems where ground clearance or narrow tunnels are a priority. The vertical plane orientation ensures the bend occurs along the minor axis of the oval profile.

Vibrant Performance T304 Stainless Steel U-J Mandrel Bends provide fabricators with a versatile, high-integrity solution for custom exhaust, intake, and header projects. This single component integrates a 180-degree bend and a 45-degree bend into one unit along with a substantial straight section, offering multiple fabrication solutions in a single piece of tubing.

Each unit is mandrel bent to maintain a consistent inside diameter (ID) throughout the radius, ensuring maximum flow and structural integrity. Constructed from 16-gauge (0.065") wall thickness T304 stainless steel, these tubes offer superior corrosion resistance and are engineered for precise welding and long-term durability in high-heat environments.

• Material: T304 Stainless Steel
• Outside Diameter (O.D.): 1.875" (1-7/8")
• Wall Thickness: 16-Gauge (0.065")
• Bend Configuration: Integrated 180-degree and 45-degree bends
• Mandrel bent for uniform flow and diameter consistency
• Minimal surface preparation required for welding
• Manufacturer Part Number: 2604

Vibrant Performance U-J mandrel bends provide fabricators with a versatile 3-in-1 solution for custom exhaust systems, headers, and intake plumbing. This integral unit combines a 180-degree bend and a 45-degree bend with a substantial straight section, allowing for multiple cut-to-fit configurations from a single piece of material.

Constructed from high-quality T304 stainless steel with a 16-gauge (0.065in) wall thickness, this tubing is engineered for dimensional accuracy and material consistency. The mandrel bending process ensures a uniform diameter throughout the bends, maintaining optimal exhaust flow and reducing backpressure. The surface requires minimal preparation for high-quality TIG or MIG welding.

• Material: T304 Stainless Steel
• Outside Diameter: 1.625in (1-5/8in)
• Wall Thickness: 16-Gauge (0.065in)
• Bend Angles: Integrated 180° and 45° bends
• Construction: Mandrel bent for consistent flow characteristics
• Manufacturer Part Number: 2602

The Stainless Bros 3.5-inch 90-degree mandrel bend is engineered for high-performance custom fabrication where space is a critical constraint. Featuring a true 1D bend radius, this component provides a 3.5-inch Center Line Radius (CLR) to maintain consistent wall thickness and flow integrity through the turn.

The "No Leg" design eliminates the straight tangent sections typically found on standard bends, allowing for seamless integration in tight engine bays or complex exhaust routing. This precision-manufactured bend is an essential component for fabricators building custom turbo manifolds, downpipes, and intake systems.

• Diameter: 3.5in
• Bend Angle: 90 Degrees
• Center Line Radius (CLR): 3.5in (1D)
• Style: No Leg (Zero Tangent)
• Manufacturer Part Number: 601-08956-3100

This Vibrant Performance 180-degree mandrel bend is engineered for fabricators building custom exhaust systems, headers, and intake plumbing. Constructed from high-quality 304 stainless steel, this tubing provides excellent corrosion resistance and durability for high-heat applications. Unlike standard crush-bent tubing, the mandrel bending process maintains a consistent inside diameter throughout the 180-degree arc to ensure maximum flow and minimal turbulence.

• Brand: Vibrant Performance
• Manufacturer Part Number: 18382
• Material: T304 Stainless Steel
• Bend Angle: 180 Degrees
• Outer Diameter (OD): 1.75 in
• Centerline Radius (CLR): 2.00 in

This component is a reliable solution for tight-clearance routing in performance plumbing. The raw finish is suitable for TIG or MIG welding, allowing for professional-grade custom fabrication.

Fabricate high-performance exhaust, intake, and cooling components with the Vibrant Performance 180-degree mandrel bend (MPN: 18182). Engineered from 16-gauge 304 stainless steel, this bend provides superior corrosion resistance and structural integrity for professional-grade custom plumbing. Unlike standard crush bends, the mandrel bending process ensures a consistent inner diameter throughout the entire radius, eliminating airflow restrictions and turbulence.

• Material: 304 Stainless Steel
• Bend Angle: 180 Degrees
• Outer Diameter (OD): 1.50 in
• Center Line Radius (CLR): 2.00 in
• Construction: Mandrel bent for uniform flow
• MPN: 18182

This 304 stainless steel tubing is ideal for TIG welding and is specifically designed to handle the thermal stress of forced induction and high-heat exhaust applications. Whether routing tight-clearance cooling lines or building a custom manifold, this 1.50-inch OD bend delivers the precision required for tight engine bays.

This 90-degree mandrel bend from Stainless Bros is engineered for high-performance fabrication, providing a smooth, consistent internal diameter for optimal exhaust or intake flow. Built for durability and precision, this bend is ideal for custom piping projects where clearance and flow efficiency are critical.

• Diameter: 3.5 inches
• Bend Angle: 90 Degrees
• Center Line Radius (CLR): 5.25 inches (1.5D)
• Leg Length: 2 inches
• Material: Stainless Steel
• Manufacturer Part Number: 601-08956-4150

Vibrant Performance 321 Stainless Steel straight tubing is engineered for extreme thermal environments where standard 304SS may be prone to failure. Stabilized with titanium, 321SS offers superior resistance to intergranular corrosion and maintains its structural integrity during prolonged operating temperatures ranging from 800°F to 1500°F (427°C to 816°C).

This 16-gauge tubing is highly recommended for forced induction applications, turbo manifolds, and downpipes. It withstands tensile stress and high-heat cycles better than 304SS, significantly reducing the risk of stress fractures in custom fabrication projects. Each section provides a consistent wall thickness and diameter for reliable welding and fitment.

• Material: 321 Stainless Steel
• Outside Diameter: 2.25 inches
• Wall Thickness: 16 Gauge
• Temperature Rating: 800°F to 1500°F
• Manufacturer Part Number: 13786

The Vibrant Performance 13352 is a precision-engineered 90-degree mandrel bend designed for professional-grade fabrication of exhaust systems, intakes, and custom manifold components. Manufactured from T304 stainless steel, this elbow features a factory-applied brushed finish that provides a clean aesthetic and requires minimal preparation for welding.

Unlike standard short-radius elbows, this mandrel-bent component features an extended 4.33-inch tangent length. This additional straight material offers greater flexibility for fabricators during fitment, trimming, and welding to adjacent tubing. The mandrel bending process ensures the 3.0-inch outside diameter remains consistent throughout the radius, preventing flow restrictions and maintaining structural integrity.

• Material: T304 Stainless Steel
• Finish: Brushed
• Outside Diameter: 3.0in
• Bend Angle: 90 Degrees
• Tangent Length: 4.33in (Extended Leg)
• Construction: Mandrel bent for uniform wall thickness and flow
• Manufacturer Part Number: 13352

This Stainless Bros 3.5-inch 45-degree mandrel bend elbow is designed for precision fabrication in high-performance exhaust, intake, and custom cooling systems. Manufactured from high-quality 16GA (.065") T304 stainless steel, it offers excellent corrosion resistance and superior weldability for professional-grade results.

Featuring a 1D (one diameter) radius, this elbow provides a tight 3.5-inch Center Line Radius (CLR). The "No Leg" configuration means the bend ends at the tangent point without any straight section, making it an essential component for compact engine bays and tight chassis packaging where every millimeter counts.

• Material: T304 Stainless Steel
• Outer Diameter: 3.5 inches
• Wall Thickness: 16GA (.065")
• Bend Angle: 45 Degrees
• Center Line Radius (CLR): 3.5 inches (1D)
• Style: No Leg (Short Radius)
• Manufacturer Part Number: 601-08926-3100

This Stainless Bros 2.0-inch diameter mandrel bend is a precision-engineered component for custom automotive fabrication, including exhaust systems, intake piping, and cooling lines. The mandrel bending process ensures the tube maintains its full diameter throughout the 90-degree sweep, eliminating the flow restrictions and turbulence common with crush-bent alternatives.

• Diameter: 2.0 in
• Bend Angle: 90 Degrees
• Center Line Radius (CLR): 3.0 in (1.5D)
• Material: High-grade stainless steel
• Manufacturer Part Number: 601-05056-4150

Designed with extended legs to provide fabricators with enough material for precise trimming and welding, this bend is ideal for tight engine bays or complex exhaust routing. Its consistent wall thickness and radius accuracy make it a reliable choice for professional-grade headers, downpipes, and custom plumbing.