Fits select 2003-2023 Subaru WRX, Subaru BRZ, and Scion FR-S models.

Project Mu TYPE NS front brake pads are engineered as the ideal street performance upgrade for drivers seeking improved stopping power without the drawbacks of track-focused compounds. These pads are specifically formulated to minimize brake dust and eliminate noise, providing a clean and quiet operation for daily commutes and spirited weekend drives. As a direct replacement for your factory pads, they offer a more consistent friction coefficient and better pedal feel, ensuring reliable braking performance across typical operating temperatures.

• Manufacturer Part Number: PSF914
• Series: TYPE NS
• Position: Front
• Application: Street Performance / Daily Driving
• Low-dust and low-noise compound
• Direct OE-replacement fitment

Fits 2002-2006 Mitsubishi Lancer (Front).

Project Mu TYPE NS brake pads are developed specifically for street performance, providing a reliable upgrade over factory components. Engineered to solve common daily-driving issues like excessive brake dust and rotor squeal, the TYPE NS series delivers consistent stopping power and enhanced pedal feel without the harshness of a dedicated track pad.

• Front axle set for improved braking performance and control
• Low-dust friction compound keeps wheels cleaner during daily use
• Noise-suppressing design for quiet operation in stop-and-go traffic
• Optimized initial bite and modulation for street-level operating temperatures
• Direct replacement for original equipment brake pads
• Manufacturer Part Number: PSF506

Fits 1989-1993 Nissan Skyline GTS (R32).

Project Mu TYPE NS brake pads are developed specifically for street use where reliable stopping power, low noise, and minimal dust are the primary requirements. As a direct replacement for factory pads, the TYPE NS compound offers improved initial bite and consistent pedal feel without the harshness or high-operating temperatures required by track-focused pads. These front brake pads are an ideal solution for daily-driven R32 GTS models looking for a performance upgrade that preserves rotor life and wheel cleanliness.

• Manufacturer Part Number: PSF236
• Series: TYPE NS
• Position: Front Axle
• Application: 1989-1993 Nissan Skyline GTS (R32)
• Performance Category: Street / Low Dust
• Included: Complete front set (left and right)

Fits 2003-2006 Nissan 350Z and Infiniti G35.

The Project Mu Sport Inner Shoe (PIS200B) is a high-performance replacement for the factory rear parking brake shoes. While original equipment shoes are designed primarily for holding the vehicle stationary, Project Mu engineered this sport compound for dynamic applications. These inner shoes provide the high initial friction and aggressive bite necessary for locking the rear wheels during drifting, gymkhana, and other performance maneuvers involving the handbrake.

• Optimized Friction: Specifically formulated for improved parking brake response and locking power.
• System Integration: Designed for vehicles equipped with a rear disc/drum combination parking brake system.
• Direct Fit: Replaces factory inner shoes without modification to the rear hub assembly.
• Application: Ideal for drifting, circuit racing, and street performance.
• Manufacturer Part Number: PIS200B

Designed for enthusiasts who require more from their parking brake, the Project Mu Sport Inner Shoe provides a significant upgrade over standard factory linings. These shoes are specifically developed for the drum-in-disc rear brake system found on the Nissan 300ZX, offering the increased friction necessary for reliable handbrake initiation and locking during performance driving.

• Manufacturer Part Number: PIS200A
• Position: Rear (Inner Shoe)
• High-friction lining material for improved handbrake bite
• Direct replacement for factory parking brake shoes
• Engineered specifically for Nissan 300ZX drum-in-disc configurations

Fits Honda Civic Type R (FK8) models.

Project Mu HC M1 (Hyper Carbon) brake pads are engineered to provide the FK8 Civic Type R with enhanced stopping power and superior thermal stability. Designed for enthusiasts who demand consistent performance during spirited street driving and occasional track use, these rear pads offer a predictable friction coefficient and excellent pedal feel.

• Manufacturer Part Number: PHMR385
• Position: Rear Axle
• Compound: HC M1 (Hyper Carbon)
• Application: High-performance street and light track use
• Designed for improved heat resistance and fade prevention over OE pads

Designed specifically for drifting and performance applications where high initial bite is required, the Project Mu D1 SPEC Rear Brake Pads (PDR209) provide the aggressive friction needed to lock the rear wheels on demand. These pads are a direct-fit replacement for the factory rear brake pads on 2003-2008 Nissan 350Z models.

The D1 SPEC compound is engineered to maintain a high coefficient of friction even at lower initial temperatures, ensuring immediate response for handbrake entries and mid-corner adjustments. The metallic-based material is built to withstand the repeated thermal cycles common in competitive drift environments while protecting the rear rotors from excessive wear.

• Application-specific compound for superior rear brake bias and drift control
• High initial friction coefficient for immediate wheel-locking capability
• Direct replacement for OE rear brake pads
• Engineered for consistent performance under high thermal stress
• Manufacturer Part Number: PDR209

Fits select 1994-2011 Acura Integra and RSX, and Honda Accord, Civic, and S2000.

Project Mu CLUB RACER rear brake pads are engineered for dedicated track use and competitive club racing. These pads provide the high-temperature stability and consistent friction coefficient required to maintain braking performance during repeated hard decelerations on the circuit. Developed through motorsport testing, the CLUB RACER compound offers precise modulation and excellent resistance to thermal fade, ensuring predictable stopping power when temperatures rise.

• Manufacturer Part Number: PCR09R389
• Series: CLUB RACER
• Placement: Rear Axle
• Designed for circuit racing and high-performance track days
• Direct replacement for factory rear brake pads
• Engineered for thermal stability and endurance under race conditions

Fits 2017-2021 Honda Civic Type R (FK8).

Project Mu CLUB RACER rear brake pads are engineered specifically for the rigorous demands of circuit use and sprint racing. Designed to provide a consistent friction coefficient across a wide temperature range, these pads solve the common issue of brake fade during aggressive track sessions. The CLUB RACER compound offers the high initial bite and precise modulation required to manage the weight and braking bias of the FK8 chassis effectively.

• Manufacturer Part Number: PCR09R385
• Series: CLUB RACER
• Position: Rear
• Compound: Super Graphite Metallic
• Intended Use: Track, Sprint Racing, and Time Attack
• Direct replacement for OE rear brake pads
• Enhanced thermal stability for consistent pedal feel

Fits 2017+ Honda Civic Type R (FK8).

The Project Mu Club Racer series is engineered for the dedicated track enthusiast and club racer. These front brake pads provide the high-temperature stability and consistent friction levels required for repeated heavy braking on the circuit. Designed to minimize fade during intensive sessions, they offer a firm pedal feel and excellent modulation for technical driving.

• Manufacturer Part Number: PCR09F506
• Position: Front
• Series: Club Racer
• Engineered for high-heat circuit performance and endurance
• Direct replacement for factory pads on the FK8 Civic Type R Brembo calipers

Fits 2002-2006 Acura RSX Type S, 2000-2009 Honda S2000, and 2006-2009 Honda Civic Si. The Project Mu Club Racer Advance front brake pads are engineered specifically for the demands of circuit racing and high-performance track driving. These pads are designed to provide consistent friction and reliable pedal feel even under the extreme thermal loads experienced during repetitive high-speed braking.

• Position: Front Axle
• Series: Club Racer Advance
• Engineered for high-temperature stability and circuit use
• Direct fitment for factory brake calipers
• Manufacturer Part Number: PCR09F336AD

Fits 2017 Subaru STI equipped with factory 6-pot Brembo calipers.

Project Mu B-FORCE brake pads are developed for the enthusiast who demands reliable stopping power for both spirited street driving and light track use. These rear pads are engineered to provide a significant increase in initial bite and consistent friction coefficient across a wide temperature range. By balancing performance with rotor longevity, the B-FORCE compound offers a predictable pedal feel and improved fade resistance without the harshness of a dedicated racing pad.

• Compound: B-FORCE street/sport material
• Application: Rear brake system
• Designed for improved initial bite and heat management
• Direct replacement for OE-style pads on 6-pot Brembo equipped vehicles
• Manufacturer Part Number: PBR961

Project Mu B-Force rear brake pads (PBR916) are engineered for drivers who demand improved stopping power and initial bite over original equipment components. Developed for spirited street use and light performance applications, these pads provide a balanced friction coefficient for consistent braking performance while maintaining manageable noise and dust levels.

• Manufacturer Part Number: PBR916
• Position: Rear
• Enhanced thermal stability for consistent pedal feel
• Optimized for street-driven performance and reliability

Fits select 2010-2017 Subaru BRZ and Legacy, Scion FR-S, and Toyota 86.

Fits 2004-2014 Subaru Impreza WRX STI.

Project Mu B-FORCE rear brake pads are engineered to provide a balanced performance upgrade for enthusiasts who demand reliable stopping power during spirited street driving and light track use. These pads are designed to improve initial bite and offer better thermal stability than standard OE components, ensuring consistent pedal feel across a wider temperature range.

As a direct-fit replacement for vehicles equipped with factory Brembo calipers, the B-FORCE series minimizes fade while maintaining manageable noise and dust levels for daily drivability. This makes them an ideal choice for Subaru owners looking to enhance the braking dynamics of their WRX STI without sacrificing urban comfort.

• Manufacturer Part Number: PBR906
• Series: B-FORCE
• Position: Rear
• Compatibility: Fits factory Brembo calipers
• Applications: 2004-2014 Subaru Impreza WRX STI (including Limited and Special Edition)

Fits select 2002-2017 Subaru (Impreza/WRX, Forester, Legacy, BRZ, Baja), 2013-2016 Scion FR-S, and 2017 Toyota 86.

Project Mu B-FORCE D929 front brake pads are engineered as a high-performance street upgrade, offering improved initial bite and higher fade resistance compared to standard OE friction materials. These pads are designed for drivers who require reliable stopping power during spirited driving without sacrificing the low-noise and low-dust characteristics necessary for daily commuting. The B-FORCE compound provides a consistent pedal feel across a wide temperature range, making it an ideal choice for sport compacts and performance sedans.

• Manufacturer Part Number: PBF914
• Series: B-FORCE
• Position: Front
• Direct replacement for factory brake pads
• Optimized for street performance and spirited driving
• Reliable braking performance from cold starts to operating temperature

Fits 2003-2014 Mitsubishi Lancer Evolution and Evolution GSR.

Project Mu B-FORCE brake pads are engineered for the performance-minded enthusiast who demands improved stopping power for spirited street driving without sacrificing daily usability. These pads provide a significant upgrade over OE components, offering a balanced friction coefficient that delivers reliable initial bite and consistent pedal feel across a wide temperature range.

Designed to minimize rotor wear and brake dust, the B-FORCE series is an ideal solution for drivers looking to enhance the braking performance of their Lancer Evolution. Each set is manufactured to precise tolerances to ensure a direct fit into the factory front calipers.

• Series: B-FORCE
• Position: Front
• Manufacturer Part Number: PBF506
• Application: Performance Street
• Direct replacement for factory brake pads

Fits select 2000-2011 Acura RSX Type-S, Honda Civic Si, and Honda S2000.

Project Mu B-FORCE brake pads are engineered for drivers who demand more stopping power than standard OE pads without sacrificing daily street manners. These front pads provide a significant increase in initial bite and a consistent pedal feel through a wide range of temperatures. Developed for performance street use, the B-FORCE compound helps minimize fade during spirited driving while remaining relatively low in dust and noise compared to dedicated track pads.

• Manufacturer: Project Mu
• Series: B-FORCE
• Position: Front
• Manufacturer Part Number: PBF336
• Application: Performance Street
• Direct replacement for factory front brake pads

Vehicle Fitment:

• 2002-2006 Acura RSX Type-S
• 2002-2011 Honda Civic Si
• 2000-2009 Honda S2000 Base
• 2008-2009 Honda S2000 CR

Fits 1989-1996 Nissan 300ZX (Base, Turbo, and 2+2) with front 4-piston calipers.

Project Mu B-FORCE brake pads are engineered to provide a significant upgrade over factory compounds for spirited street driving and performance use. These pads deliver a high level of initial bite and consistent stopping power, ensuring reliable performance across a wide range of operating temperatures. The B-FORCE compound is specifically designed to minimize brake dust and noise while maintaining the thermal resistance required to prevent fade during demanding driving scenarios.

• Manufacturer Part Number: PBF236
• Position: Front
• Compound: B-FORCE performance street compound
• Installation: Direct replacement for OE front pads on 4-piston caliper models
• Performance: High initial friction with low dust and noise characteristics

Fits select 2008-2014 Nissan 370Z, Infiniti G35 Sport, G37 Sport, and FX50 models equipped with Akebono brake calipers. These Project Mu B-FORCE front brake pads (PBF210) are engineered to deliver reliable stopping power and improved initial bite for street performance and spirited driving.

Designed as a direct-fit replacement for factory brake pads, the B-FORCE compound minimizes brake dust and noise while maintaining consistent performance across a wide range of temperatures. Whether you are daily driving or navigating canyon roads, these pads provide the thermal stability needed to resist brake fade.

• Manufacturer Part Number: PBF210
• Designed for Akebono-equipped sport packages
• Optimized for low dust and reduced noise levels
• Improved initial bite and fade resistance over standard OE pads
• Complete set for the front axle

Fits 1986-1992 Toyota Supra Base and Turbo models.

Project Mu B-FORCE brake pads are engineered to provide a significant performance upgrade over factory components for street-driven vehicles. These front pads offer improved initial bite and reliable stopping power across a wide temperature range, making them an excellent choice for spirited daily driving and occasional performance use.

Developed with a focus on balanced performance, the B-FORCE series minimizes noise and vibration while delivering the fade resistance needed for demanding conditions. These pads are a direct replacement for your worn original equipment front pads, designed to install into the factory calipers without modification.

• Product Line: B-FORCE
• Position: Front
• Manufacturer Part Number: PBF187
• Compound: Performance Street
• Designed for improved initial bite and low noise
• Excellent fade resistance for spirited driving