This Part Fits:

This Part Fits:

This Part Fits:

This Part Fits:

This Part Fits:

Fits 2012-2020 Scion FR-S, Subaru BRZ, and Toyota 86 (ZN6/ZC6).

Standard rubber radiator hoses degrade over time, becoming brittle and prone to cracking under the high-temperature cycles of a performance engine. This GReddy Silicone Radiator Hose Kit is engineered to withstand higher operating temperatures and pressures than factory equipment, making it an essential upgrade for both daily driven and track-oriented ZN6/ZC6 builds. These hoses are a direct-fit replacement for the original equipment, utilizing multi-layer silicone to ensure long-term durability and a consistent seal.

• Constructed from high-grade, multi-layer silicone for superior heat and pressure resistance
• Direct-fit replacement for the factory upper and lower radiator hoses
• Helps prevent coolant leaks and hose failure during high-performance driving
• Compatible with factory mounting points and cooling system components
• Engineered specifically for the 2012-2020 FR-S/BRZ/86 chassis

Fits 2005-2007 Ford F-250/F-350 Super Duty and 2005 Ford Excursion (6.0L).

Replace your aging, prone-to-degradation factory rubber cooling lines with the Mishimoto Silicone Coolant Hose Kit. Specifically engineered for the 6.0L Powerstroke equipped with a Monobeam chassis, these hoses are a direct-fit upgrade designed to withstand the extreme temperatures and pressures common in high-performance diesel cooling systems.

Every hose in this kit is manufactured from high-grade, 4-ply silicone with embedded heat-resistant fibers. This construction provides superior durability and prevents the cracking or swelling often seen in OE rubber hoses after years of heat cycles. The vibrant red finish adds a custom look to your engine bay while ensuring long-term cooling system reliability.

• Constructed from high-grade 4-ply silicone for maximum pressure tolerance
• Internal heat-resistant fibers enhance structural integrity
• Direct-fit replacement for factory rubber hoses
• Specifically designed for Monobeam chassis configurations
• High-temperature resistance for heavy-duty towing and high-heat environments
• Manufacturer Part Number: MMHOSE-F2D-05MRD

Fits select 1995-2004 Toyota 4Runner and Tacoma (3.4L).

Ensure the cooling system reliability of your 3.4L V6 with the Mishimoto silicone radiator hose kit. After decades of heat cycles and high-mileage use, factory rubber hoses become brittle and prone to failure. This kit provides a direct-fit solution that increases heat and pressure tolerance, whether you are on the trail or your daily commute.

Constructed from high-grade 4-ply silicone with embedded heat-resistant fibers, these hoses are designed to withstand the rigors of a hard-working cooling system. This kit (MPN: MMHOSE-4RUN34-96RD) includes both the upper and lower radiator hoses in a red finish, along with a full set of high-quality worm-gear clamps for a complete installation. Like all Mishimoto products, this kit is backed by the Mishimoto Lifetime Warranty.

• Direct fit for 1995-2004 Toyota 4Runner and Tacoma (3.4L)
• High-grade 4-ply silicone construction
• Embedded heat-resistant fibers for superior heat and pressure tolerance
• Includes upper and lower radiator hoses
• Complete set of worm-gear clamps included
• Vibrant red finish
• Mishimoto Lifetime Warranty

Fits 2012-2015 Chevrolet Camaro SS, ZL1, and Z/28 models.

The Mishimoto MMHOSE-CSS-12RD silicone radiator hose kit provides a durable, high-performance replacement for factory rubber cooling hoses. Specifically engineered for the fifth-generation Camaro, these hoses are constructed from five layers of high-grade silicone with heat-resistant embedded fibers. This multi-layer design significantly improves heat and pressure tolerance compared to stock components, making it an essential upgrade for track duty or high-performance street driving.

Each kit maintains precise OEM fitment for a straightforward installation while adding a distinct aesthetic upgrade to the engine bay. The silicone construction resists degradation from heat and ozone, ensuring a much longer service life than standard EPDM rubber.

• Direct fit for 2012-2015 Chevrolet Camaro (SS, Z/28, ZL1)
• Constructed from 5 layers of silicone with heat-resistant embedded fibers
• Significantly higher pressure and temperature resistance over OEM rubber
• Kit includes upper radiator hose, lower radiator hose, and breather hose
• Red finish for enhanced engine bay styling
• Manufacturer Part Number: MMHOSE-CSS-12RD

The Vibrant Performance Internal Support Spring (MPN: 17310) provides critical reinforcement for -10AN braided flexible hoses. This 4-foot length of coiled support is engineered to maintain the hose's structural integrity and prevent collapse when subjected to extreme vacuum or routed through exceptionally tight bends where kinking is a risk.

Ideal for suction-side applications in oil, coolant, or breather systems, this spring ensures consistent internal cross-sectional area and protects against plumbing failure. Note that this component is specifically designed for standard rubber-based braided flex hoses and is not intended for use with PTFE-lined hoses.

• Size Compatibility: Optimized for -10AN braided flex hoses
• Total Length: 4 Feet
• Primary Function: Prevents vacuum collapse and kinking in tight radii
• Application Note: Not for use with PTFE-lined flex hose
• Manufacturer Part Number: 17310

Maintain consistent fluid flow and prevent structural failure with the Vibrant Performance Internal Support Spring. Engineered specifically for -12AN braided flexible hoses, this 4-foot spring provides the necessary internal tension to resist hose collapse during high-vacuum conditions or when executing tight-radius bends in cramped engine bays.

• Specifically sized for -12AN braided flexible hoses
• Length: 4 Feet (can be trimmed to application length)
• Prevents hose collapse under extreme suction or vacuum
• Eliminates kinking in tight plumbing radii
• Compatibility: Not intended for use with PTFE-lined flex hoses
• Manufacturer Part Number: 17312

Fits select 2020-2025 Chevrolet Silverado and GMC Sierra 2500 HD and 3500 HD models (6.6L L5P Duramax).

Replace the factory rubber upper radiator hose on your L5P Duramax with a high-performance Wehrli Custom Fabrication (WCFab) hard pipe. This fabricated aluminum pipe eliminates the potential for hose expansion or failure under pressure while significantly cleaning up the appearance of your engine bay. Designed as a direct bolt-on for trucks equipped with the OEM GM radiator, this kit installs easily with basic hand tools and requires no permanent vehicle modifications.

• Fabricated aluminum coolant pipe construction
• Durable WCFab Red powder coat finish
• Includes heavy-duty silicone boots and stainless steel T-bolt clamps
• Direct replacement for GM Part Numbers: 84813629, 85122989
• Compatible with factory radiator and mounting points
• Manufacturer Part Number: WCF100541-RED

Fits select 2013-2018 Ram 2500 and 3500 HD trucks (6.7L Cummins). This Wehrli Custom Fabrication (WCFab) Upper Coolant Pipe replaces the factory rubber radiator inlet hose with a more durable, aesthetic aluminum hard pipe. Note: This part is for use with the OEM RAM radiator and is not compatible with 2013-2015 models equipped with dual radiators or twin CP3 pumps.

Constructed from high-quality aluminum, this pipe eliminates the risk of hose expansion or failure under pressure. Each kit is finished in a durable WCFab Red powder coat and includes heavy-duty silicone boots and stainless steel T-bolt clamps for a secure, leak-free installation on factory mounting points.

• Replaces failure-prone OEM rubber upper coolant hose
• Direct fit for trucks with factory radiator dimensions
• Durable WCFab Red custom powder coat finish
• Includes heavy-duty silicone boots and T-bolt clamps
• MPN: WCF100517-RED
• Replaces MOPAR Part Numbers: 68166469AC, 68166469AA, 68166469AB, 68224266AB, 68224266AA, 55056954AB, 55056954AA, 68227796AB, 68227796AA

Fits all 2010-2023 Lexus GX460 models equipped with the 1UR-FE engine.

Standard factory rubber radiator hoses are prone to softening and degradation over time, especially when subjected to the high-heat cycles of towing, off-roading, or daily commuting. This Mishimoto Silicone Coolant Hose Kit provides a significant upgrade in durability and pressure tolerance. By replacing the OE hoses with five-layer silicone reinforced with heat-resistant embedded fibers, you ensure your GX460 cooling system remains leak-free and reliable under extreme conditions.

Each kit includes both upper and lower radiator hoses and high-quality worm gear clamps for a complete installation. This kit is finished in black to maintain a clean under-hood appearance while offering vastly superior performance compared to stock EPDM rubber. Like all Mishimoto products, this kit is backed by a Lifetime Warranty for long-term peace of mind.

• Construction: Five layers of silicone with heat-resistant embedded fibers
• Included Components: Upper radiator hose, lower radiator hose, and (4) worm gear clamps
• Material: High-grade silicone for increased pressure and heat tolerance
• Direct Fit: Designed to replace factory hoses with no modifications required
• MPN: MMHOSE-GX460-10BK

Fits Volvo 700 and 940 Turbo models.

This do88 silicone coolant hose kit is engineered to replace the factory rubber hoses, providing a significant upgrade in both durability and heat resistance. Standard EPDM rubber hoses often degrade over time, leading to swelling, cracking, and potential coolant leaks under the pressure of turbocharged operation. This kit utilizes high-grade silicone construction to withstand higher temperatures and pressures, ensuring long-term reliability for your engine's cooling system.

• Direct-fit replacement for factory OE coolant hoses
• High-quality silicone construction for superior thermal properties
• Enhanced resistance to pressure and chemical degradation compared to rubber
• Color Finish: Black
• Manufacturer Part Number: DO88-KIT9S

Fits 2001-2008 Volvo S60 and V70N models.

Upgrade your cooling system’s reliability with the do88 Silicone Coolant Hose Complementary Kit. These high-grade silicone hoses are engineered to replace the factory rubber lines that often become brittle and prone to failure due to the high-heat cycles common in the Volvo P2 chassis engine bay. This kit serves as a supplement to primary hose sets, ensuring critical auxiliary coolant paths are reinforced against pressure and temperature extremes.

• Manufacturer Part Number: DO88-KIT49B
• Material: Multi-layer reinforced silicone for maximum durability
• Color: Blue
• Installation: Designed for a direct-fit replacement of OE hose components
• Thermal Resistance: Superior heat management compared to standard EPDM rubber

Fits 1999-2000 Volvo C70, S70, and V70 models.

Upgrade your cooling system's reliability with the do88 silicone coolant hose complement kit. Designed to replace aging, brittle factory rubber lines, this kit focuses on the secondary coolant hoses often overlooked in primary radiator hose sets. These hoses are engineered to withstand higher temperatures and pressures than OEM components, making them an essential upgrade for both daily drivers and performance-built Volvos.

• High-quality multi-layer reinforced silicone construction
• Direct-fit design for factory mounting points
• Superior resistance to heat, pressure, and coolant additives
• Finished in black for a discreet, factory-plus engine bay appearance
• Manufacturer Part Number: DO88-KIT15S

Fits 2012-2018 Jeep Wrangler and Wrangler JK (V6 engines).

Replace aging, degradation-prone rubber hoses with the Mishimoto Silicone Radiator Hose Kit for a significant upgrade in both engine bay aesthetics and cooling system reliability. Unlike standard factory hoses that weaken over time, these Mishimoto hoses are engineered to withstand the extreme temperatures and pressures encountered during heavy-duty trail use or rock crawling.

• Five-layer silicone construction for maximum durability and burst resistance
• Embedded heat-resistant fibers improve heat tolerance and structural integrity
• Direct-fit design for 2012-2018 V6 Jeep Wrangler models
• Includes both upper and lower radiator hoses
• Comes with four stainless steel worm-gear clamps for a secure, leak-free installation
• Mishimoto Lifetime Warranty

Whether you are maintaining a daily driver or building an off-road rig, this black silicone kit (MPN: MMHOSE-WR6-12BK) provides the peace of mind that comes with high-performance cooling components.

Fits 1995-1998 Nissan Skyline GT-R (BCNR33 and BNR34).

Upgrade your cooling system with the GReddy Silicone Radiator Hose Kit. Designed specifically for the R33 and R34 GT-R platforms, these high-performance hoses replace the aging factory rubber units that are prone to cracking and failure under high-pressure conditions. Constructed from high-grade reinforced silicone, they provide superior resistance to heat, pressure, and coolant additives, ensuring long-term reliability on both the street and the track.

• Direct-fit replacement for factory upper and lower radiator hoses
• Constructed from multi-layer reinforced silicone for maximum durability
• Higher tolerance for heat and pressure compared to OE rubber components
• Engineered to maintain shape and flow under extreme operating temperatures
• Manufacturer Part Number: 12023303

Fits 2005-2010 Chrysler 300, Dodge Challenger, Dodge Charger, and Dodge Magnum (5.7L).

Replace your aging, prone-to-failure OEM rubber radiator hoses with the Mishimoto silicone radiator hose kit. Designed for the Mopar LX chassis, these hoses are engineered to withstand higher temperatures and increased cooling system pressures. Whether you are maintaining a daily driver or upgrading a performance build, this kit provides a durable, leak-free solution that maintains a factory-correct fitment.

Constructed from five layers of high-grade silicone with heat-resistant embedded fibers, these hoses offer superior longevity compared to standard EPDM rubber. This kit includes both the upper and lower radiator hoses, providing a complete cooling system refresh for your 5.7L V8 engine.

• Direct fit for 2005-2010 Mopar 5.7L V8 applications
• Five-layer silicone construction for maximum durability
• Reinforced with heat-resistant embedded fibers
• Increased pressure and heat tolerance over stock rubber hoses
• Includes upper and lower radiator hoses
• Manufacturer Part Number: MMHOSE-MOP57-05BK

Fits select 2013-2014 Ram 2500 and 3500 trucks (6.7L). This Mishimoto silicone radiator hose kit provides a critical cooling system upgrade for your 6.7L Cummins engine. Replacing the failure-prone factory rubber hoses, these components are engineered to withstand higher temperatures and pressures, whether your truck is stock or highly modified.

Constructed from high-grade 4-ply silicone with heat-resistant embedded fibers, these hoses offer superior durability and resistance to degradation over time. The one-piece design of the upper hose eliminates the weak factory Y-connector, a common leak point. To ensure consistent flow under heavy load, the lower hose features an internal stainless steel support spring to prevent collapse under suction. This kit is finished in vibrant red and carries the Mishimoto Lifetime Warranty.

• Manufacturer Part Number: MMHOSE-RAM-13RD
• High-grade 4-ply silicone construction for superior pressure tolerance
• Heat-resistant embedded fibers improve thermal stability
• One-piece design eliminates failure-prone stock Y-connector
• Internal spring in lower hose prevents hose collapse
• Includes upper and lower main radiator hoses and secondary radiator hoses

Upgrade your vehicle's cooling system with the Mishimoto Black Silicone Hose Kit, specifically designed for 1992-2000 Honda Civic and 1993-1997 Honda Civic del Sol models equipped with B16 engines. This kit replaces aging, brittle factory rubber hoses with high-grade silicone components that offer superior pressure tolerance and heat management.

Constructed with heat-resistant embedded fibers for increased durability, these hoses are engineered to withstand the rigors of high-performance driving. The dual-layer design helps efficiently reduce engine bay heat and prevents the hose expansion or failure common with stock rubber. This kit is a direct-fit replacement, ensuring a reliable seal and factory-like installation.

• Direct fit for B16-series engines (1992-2000 Honda Civic and 1993-1997 Honda Civic del Sol)
• Made of high-grade silicone with internal reinforcement
• Maximum Temperature Rating: 330°F
• Color: Black
• Manufacturer Part Number: MMHOSE-CIV-92B16BK

Fits 1995-2004 Toyota Tacoma and 1996-2002 4Runner (3.4L). Upgrade your cooling system with the Mishimoto silicone radiator hose kit, engineered to replace aging factory rubber that becomes brittle and prone to failure over time.

Constructed from high-grade 4-ply silicone with embedded heat-resistant fibers, these hoses offer significantly higher pressure and temperature tolerances compared to OE components. This kit is designed as a direct-fit replacement, ensuring a secure seal whether you are navigating off-road trails or daily commuting. Each kit includes the upper and lower radiator hoses along with a complete set of stainless steel worm-gear clamps for a straightforward installation.

• Direct fit for the 3.4L V6 engine
• 4-ply silicone construction with heat-resistant fibers
• Improved heat and pressure resistance over factory rubber
• Includes upper and lower radiator hoses
• Includes full set of high-quality worm-gear clamps
• Finished in black silicone
• Manufacturer Part Number: MMHOSE-4RUN34-96BK
• Mishimoto Lifetime Warranty

Fits select 2008-2018 Subaru WRX, STI, and Forester XT models.

Upgrade your cooling system with the Torque Solution Silicone Radiator Hose Kit. Engineered to replace factory rubber hoses that are prone to cracking and failure over time, these silicone hoses offer significantly higher heat and pressure resistance. Whether for a daily driver or a track-ready build, this kit ensures your coolant stays where it belongs while adding a custom look to your engine bay.

• Direct replacement for OEM upper and lower radiator hoses
• Multi-layer reinforced silicone construction for maximum durability
• Smooth internal bore for optimized coolant flow
• High heat and pressure resistance for extreme operating conditions
• Vibrant blue finish for enhanced engine bay aesthetics
• Manufacturer Part Number: TS-SU-420BU

Fits 2008-2015 Mitsubishi Lancer Evolution X (GSR, MR, MR Touring, SE, and Final Edition).

The Torque Solution Silicone Radiator Hose Kit is a direct-fit performance upgrade designed to replace the factory rubber cooling hoses on the 4B11T engine. Constructed from high-grade multi-layer silicone, these hoses are engineered to withstand significantly higher operating temperatures and pressures than original equipment. This prevents the common issues of hose swelling, cracking, or perishing over time, which can lead to catastrophic coolant loss during spirited driving or track sessions.

• Direct replacement for OEM upper and lower radiator hoses
• Multi-layer silicone construction for maximum durability and heat resistance
• Smooth internal bore for optimized coolant flow
• Finished in black for a clean, professional engine bay appearance
• Manufacturer Part Number: TS-EVX-434BK

Fits Nissan 240SX models equipped with the KA24 engine.

The ISR Performance Silicone Radiator Hose Kit is a direct-fit upgrade designed to replace aging, brittle OEM rubber hoses. Constructed from high-grade multi-layer silicone, these hoses provide significantly better resistance to the high temperatures and pressures common in performance driving environments. This kit solves the common failure point of dry-rotted or cracked factory lines, ensuring your cooling system remains sealed and efficient.

• Direct replacement for factory upper and lower radiator hoses
• Multi-layer silicone construction for maximum durability and burst resistance
• Smooth internal bore for optimized coolant flow
• Black finish for a professional, understated engine bay appearance
• Manufacturer Part Number: IS-RH-KA-BLK

Upgrade your cooling system with this high-performance silicone coolant hose kit from do88. Designed specifically for the Audi S3, Audi TT, and Seat Leon Cupra R equipped with the 1.8T engine, this kit replaces factory rubber hoses that are prone to cracking and heat soak over time.

• Fits Audi S3, Audi TT, and Seat Leon Cupra R models (1.8T).
• Multi-layer silicone construction for superior pressure and temperature resistance compared to OE rubber.
• Smooth internal bore improves coolant flow efficiency.
• Direct replacement for factory coolant hoses.
• Durable black finish for a clean, professional engine bay.
• Manufacturer Part Number: DO88-KIT78S

Upgrade your cooling system with the do88 Silicone Coolant Hose Kit, specifically engineered for the 1.8T engine found in the Audi S3, TT, and Seat Leon Cupra R. These high-performance hoses serve as a direct replacement for the factory rubber lines, which are known to become brittle, crack, and fail after years of heat cycling and pressure.

Constructed from multi-layer reinforced silicone, this kit is designed to handle significantly higher temperatures and pressures than standard OEM hoses. The smooth internal bore optimizes coolant flow, while the red finish provides a durable, custom look in the engine bay. These hoses are modeled after factory dimensions to ensure a precise fit and straightforward installation using standard hose clamps.

• Manufacturer Part Number: DO88-KIT78R
• Material: High-grade multi-layer reinforced silicone
• Color: Red
• Application: Primary coolant system
• Fitment: Audi S3, Audi TT, and Seat Leon Cupra R (1.8T)

Fits Volvo 240 models.

The do88 Silicone Coolant Hose Complement Kit provides a durable, high-performance upgrade for the auxiliary cooling lines in your Volvo 240. While main radiator hose kits cover primary cooling, this complement kit replaces the remaining factory rubber hoses that are often neglected and prone to failure from heat-aging and ozone degradation. Constructed from high-grade silicone with multi-layer reinforcement, these hoses offer significantly better longevity and pressure resistance than original equipment (OE) rubber.

• High-quality silicone construction for superior heat and pressure resistance
• Multi-layer fabric reinforcement for enhanced structural integrity
• Smooth internal bore to optimize coolant flow
• Black finish for a clean, professional appearance in the engine bay
• Direct replacement for factory coolant lines
• Manufacturer Part Number: DO88-KIT64S

Fits select 2001-2008 Volvo S60 and V70 (V70N) models.

The do88 silicone coolant hose complement kit (DO88-KIT49S) is engineered to replace specific auxiliary cooling system hoses that are often overlooked during standard maintenance. Unlike factory EPDM rubber that degrades and swells under continuous heat cycles, these multi-layer reinforced silicone hoses maintain their structural integrity and flexibility even in high-temperature engine bay conditions.

This kit is designed to complement a primary hose set, providing a comprehensive refresh for your Volvo's cooling circuit to prevent unexpected failures and coolant leaks. Every hose is designed for a precise fit over factory junctions.

• High-grade multi-layer reinforced silicone construction for maximum durability
• Superior heat and pressure resistance compared to OE rubber
• Smooth internal surface for optimal coolant flow
• Includes auxiliary hoses to complete a full system refresh
• Finish: Black
• Manufacturer Part Number: DO88-KIT49S