Fits 1997-2007 Porsche 911, Boxster, and Cayman models (including Carrera, Turbo, GT2, GT3, and S trims).

The Fidanza short throw shifter (MPN 891904) is engineered to reduce the distance of the gear lever travel, providing a shorter, crisper, and more precise shift. By replacing the factory shifter assembly, this unit improves the tactile feedback of the transmission, allowing for faster and more consistent gear engagement during spirited driving.

Designed as a direct-fit upgrade, this shifter is built for a straightforward installation that can be completed in a few hours using common hand tools. It is an ideal solution for drivers looking to tighten up the gear selection on their 996 or 997 generation 911, as well as 986/987 Boxster and Cayman models.

• Manufacturer Part Number: 891904
• Reduces shift throw for quicker gear transitions
• Improves shifting precision and feel
• Direct bolt-in replacement for the OE shifter assembly
• Compatible with factory interior trim
• Can be installed with standard hand tools in a single afternoon

Fits 2003-2006 Dodge Viper and 2004-2006 Ram 1500 SRT-10 (8.3L).

The Fidanza aluminum flywheel (MPN 194991) is engineered to reduce rotational mass and improve throttle response in high-performance Dodge SRT-10 applications. Constructed from high-strength billet 6061 T6 or 2024 T4 aluminum, this flywheel is 40-60% lighter than the factory cast iron unit. By significantly lowering the Moment of Inertia (MOI), it allows the 8.3L V10 engine to rev more freely and deliver power more efficiently to the drivetrain.

Designed for professional-grade serviceability, this unit features a bolt-on replaceable friction plate made from heat-treated steel, allowing for easy renewal of the clutch surface without replacing the entire flywheel. The assembly is secured with military-spec fasteners and features a hardened 1050 steel ring gear for reliable starter engagement and long-term durability under high-torque loads.

• Billet 6061 T6 or 2024 T4 aluminum body for high strength and low weight
• 40-60% lighter than stock for quicker acceleration and improved RPM matching
• Replaceable heat-treated friction plate provides optimum grip and serviceability
• Hardened 1050 steel ring gear ensures reliable ignition cycles
• Military-spec fasteners for maximum structural integrity
• Stepped dowels included for precise alignment and fitment

Fits 1983-1988 Porsche 924 S and 944 Base (2.5L).

The Fidanza aluminum flywheel is engineered to significantly reduce rotating mass, coming in at 40-60% lighter than the factory unit. By lowering the Moment of Inertia (MOI), this flywheel frees up horsepower and delivers significantly faster throttle response and quicker acceleration. The main body is CNC-machined from high-strength billet 6061 T6 or 2024 T4 aluminum, providing a lightweight yet durable foundation for performance driving.

This flywheel features a replaceable heat-treated friction plate for optimum grip and long service life. When the friction surface eventually wears, it can be unbolted and replaced without requiring a completely new flywheel. For maximum reliability, the assembly uses military-spec fasteners and a hardened 1050 steel ring gear. Note: When selecting a replacement friction kit, confirm whether your specific flywheel uses an 18-bolt or 20-bolt pattern before purchase.

• 40-60% lighter than stock for improved engine response
• Billet 6061 T6 or 2024 T4 aluminum body
• Replaceable hardened 1050 steel ring gear
• Bolt-on replaceable friction plate for easy servicing
• Heat-treated friction surface for maximum grip
• Military-spec fasteners for increased strength
• Stepped dowels for precise alignment
• Manufacturer Part Number: 199001

Fits 1989-1996 Chevrolet Corvette (5.7L).

Engineered to reduce rotational mass and free up horsepower, the Fidanza 198501 aluminum flywheel is 40% to 60% lighter than factory cast-iron units. This significant reduction in the moment of inertia (MOI) allows for significantly faster throttle response and quicker acceleration. The flywheel body is CNC-machined from high-strength billet 6061 T6 or 2024 T4 aluminum and features a replaceable 1050 steel friction plate, allowing for easy servicing without the need to replace the entire assembly.

• Materials: Billet 6061 T6 or 2024 T4 aluminum body with hardened 1050 steel ring gear
• Performance: 40-60% weight reduction compared to OE for improved RPM climb
• Serviceability: Bolt-on replaceable heat-treated friction plate for long-term use
• Hardware: High-strength military-spec fasteners for maximum reliability
• Precision: Stepped dowels for accurate alignment and lower MOI design
• MPN: 198501

Fits select 1995-2006 Chrysler, Dodge, Eagle, Mitsubishi, and Plymouth vehicles including Eclipse, Neon, Talon, and PT Cruiser.

The Fidanza Performance aluminum flywheel (MPN 194201) is engineered to significantly reduce rotational mass, providing 40-60% weight savings over heavy factory cast-iron units. By lowering the Moment of Inertia (MOI), this flywheel allows the engine to rev more freely, resulting in faster throttle response and improved acceleration. The body is CNC-machined from high-grade 6061 T6 or 2024 T4 billet aluminum for superior strength and heat dissipation.

For long-term serviceability, this flywheel features a replaceable 1050 steel ring gear and a bolt-on friction plate. This design allows you to refresh the friction surface without replacing the entire flywheel. Note: 1996 and newer applications must use the 1995-specification clutch and flywheel bolt configuration. Always verify the bolt pattern (18 vs 20) on your specific flywheel when ordering replacement friction kits.

• Body Material: Billet 6061 T4 or 2024 T4 Aluminum
• Friction Surface: Heat-treated, bolt-on replaceable steel plate
• Ring Gear: Hardened 1050 Steel, replaceable
• Fasteners: Military-spec hardware for maximum reliability
• Alignment: Stepped dowels for precise fitment on most applications
• Performance: 40-60% lighter than OE units for quicker acceleration
• Manufacturer Part Number: 194201

Restore the engagement surface of your Fidanza aluminum flywheel with the Fidanza 9.85in OD x 6in ID Friction Kit (MPN 229851). This kit allows you to refresh the friction area of your existing flywheel, providing a cost-effective alternative to replacing the entire assembly when the surface becomes worn or heat-spotted.

• Manufactured from 1050 hardened steel for high-performance durability
• Heat-treated friction plate provides optimum grip and extended service life
• Pickled and oiled finish helps prevent corrosion during storage and service
• Precision milled to meet strict tolerances for smooth operation
• Includes all-new replacement hardware for a complete and secure installation

Fits 1978-1983 Porsche 911 SC (Non-Turbo 6-Cylinder).

The Fidanza aluminum flywheel (MPN 199991) is engineered to significantly reduce rotational mass and free up horsepower in the Porsche 911 SC. By replacing the heavy factory unit with a billet 6061 T6 or 2024 T4 aluminum body, this flywheel is 40-60% lighter than stock. This drastic reduction in the Moment of Inertia (MOI) allows the engine to rev more freely, providing immediate throttle response and faster acceleration through the gears.

Built for the rigors of high-performance driving, the assembly features a replaceable 1050 steel friction plate, allowing for easy servicing without replacing the entire flywheel. The hardened steel ring gear and military-spec fasteners provide the strength and reliability required for both street and track applications. Please note that this specific flywheel requires the use of Porsche Bearing #901-102-025-01. Always confirm your specific bolt pattern (18 vs 20) for the friction kit before purchase.

• Construction: Billet 6061 T6 or 2024 T4 Aluminum
• Weight: 40-60% lighter than factory cast iron flywheels
• Friction Surface: Replaceable heat-treated plate for optimum grip
• Ring Gear: Hardened 1050 steel for long-term durability
• Hardware: Military-spec fasteners for maximum strength
• Fitment Note: Requires Porsche Bearing #901-102-025-01
• Manufacturer Part Number: 199991

Fits 2004-2008 Acura TSX Base models (2.4L).

The Fidanza 191241 aluminum flywheel is engineered to reduce rotational mass and improve engine response. By dropping 40-60% of the weight compared to the factory cast iron unit, this flywheel significantly lowers the Moment of Inertia (MOI), allowing the engine to rev more freely and deliver quicker acceleration through the gears. The body is CNC-machined from high-quality 6061 T6 or 2024 T4 billet aluminum for superior strength and thermal dissipation.

Designed for long-term serviceability, this flywheel features a bolt-on replaceable friction plate made from heat-treated steel, allowing you to refresh the clutch surface without replacing the entire assembly. The hardened 1050 steel ring gear is also replaceable and secured with military-spec fasteners for maximum reliability under high-RPM conditions.

• Manufacturer Part Number: 191241
• Body Material: Billet 6061 T6 or 2024 T4 Aluminum
• Friction Surface: Replaceable heat-treated steel plate
• Ring Gear: Hardened 1050 steel
• Weight Reduction: 40-60% lighter than OEM
• Fasteners: Military-spec for increased strength
• Stepped dowels included for precise alignment

Improve throttle response and acceleration in your 1996-2004 Ford Mustang (4.6L) by reducing rotating mass with a Fidanza aluminum flywheel. This 8-bolt flywheel is precision-machined from billet 6061 T6 or 2024 T4 aluminum, making it 40-60% lighter than heavy factory units. By lowering the Moment of Inertia (MOI), your engine can rev more freely and reach its powerband faster.

• Serviceable Design: Features a bolt-on, heat-treated friction plate that can be replaced as a wear item, eliminating the need to resurface or replace the entire flywheel.
• Durable Construction: Equipped with a replaceable hardened 1050 steel ring gear and assembled with military-spec fasteners for maximum reliability.
• Direct Bolt-On: Precision-stepped dowels ensure proper alignment and a secure fit to the crankshaft.

Fits select 1996-2004 Ford Mustang models (Base, GT, Bullitt, Mach 1, and SVT Cobra) equipped with the 4.6L engine and 8-bolt crankshaft. Manufacturer Part Number: 186481.

Fits Nissan Patrol models.

The Fidanza 143191 aluminum flywheel is engineered to significantly reduce rotational mass, offering 40-60% weight savings compared to heavy OE steel components. By lowering the Moment of Inertia (MOI), this flywheel allows the engine to rev more freely, providing faster throttle response and more rapid acceleration. This unit is built for long-term performance with a modular design that features a bolt-on replaceable friction plate, allowing for easy servicing without requiring a full flywheel replacement.

• Body Material: CNC-machined Billet 6061 T6 or 2024 T4 aluminum
• Ring Gear: Replaceable hardened 1050 steel
• Friction Surface: Heat-treated friction plate for optimum clutch grip
• Fasteners: Military-spec hardware for maximum strength and reliability
• Alignment: Stepped dowels for precise fitment (on most applications)
• Weight Reduction: 40-60% lighter than stock for reduced parasitic drag
• Manufacturer Part Number: 143191

Fits 2006-2012 Lexus IS250 Base and C models equipped with 6-speed manual transmissions.

The Fidanza 130201 aluminum flywheel is engineered to reduce rotating mass, delivering significantly faster throttle response and quicker acceleration. By being 40% to 60% lighter than the factory unit, this flywheel reduces the engine's moment of inertia, allowing more power to be transferred directly to the drivetrain. This is an essential upgrade for drivers seeking to free up horsepower and improve RPM recovery during shifts.

Manufactured from high-strength billet 6061 T6 or 2024 T4 aluminum, this unit features a replaceable 1050 steel friction plate. This design eliminates the need to resurface or replace the entire flywheel; you can simply bolt on a new friction surface during clutch service. A hardened 1050 steel ring gear and military-spec fasteners ensure maximum reliability and strength under high-load conditions.

• High-strength billet 6061 T6 or 2024 T4 aluminum body
• Heat-treated, replaceable friction plate for optimum grip and longevity
• Hardened 1050 steel ring gear for durable starter engagement
• Military-spec fasteners for superior component integrity
• 40% to 60% lighter than OE flywheel for reduced rotational mass
• Stepped dowels included for precise alignment
• Manufacturer Part Number: 130201

Fits 1959-1961 MG MGA (Base and Twin Cam).

This Fidanza lightweight aluminum flywheel is engineered to reduce rotational mass and free up horsepower by significantly lowering the Moment of Inertia (MOI). Constructed from high-strength billet 6061 T6 or 2024 T4 aluminum, this unit is 40-60% lighter than the factory cast iron flywheel, resulting in faster throttle response and improved acceleration. It features a unique bolt-on replaceable friction plate made from heat-treated 1050 steel, allowing you to refresh the clutch surface without replacing the entire flywheel.

• Billet 6061 T6 or 2024 T4 aluminum body for high strength and low weight
• Replaceable 1050 steel friction plate for optimum grip and extended service life
• Replaceable hardened 1050 steel ring gear for durable starter engagement
• Military-spec fasteners for maximum reliability and hardware strength
• Stepped dowels for precise alignment and fitment
• Direct bolt-on replacement for factory flywheels
• Manufacturer Part Number: 126681

Fits 2000-2007 Toyota Celica GTS, Corolla XRS, Matrix XRS, Pontiac Vibe GT, and Lotus Elise/Exige models.

The Fidanza 130131 Aluminum Flywheel is a precision-engineered performance upgrade designed to reduce rotational mass and unlock hidden horsepower. By replacing the heavy factory cast iron unit with a billet aluminum body that is 40-60% lighter, this flywheel significantly lowers the Moment of Inertia (MOI). The result is a more responsive engine that revs faster and accelerates harder through the gears.

Built for longevity and serviceability, the Fidanza flywheel features a replaceable 1050 steel ring gear and a bolt-on, heat-treated friction plate. This unique design ensures optimum clutch grip and allows you to refresh the friction surface without replacing the entire flywheel. Assembled with military-spec fasteners and featuring stepped dowels for precise alignment, this unit is a direct bolt-on solution for high-performance street and track builds.

• Body Material: Billet 6061 T6 or 2024 T4 Aluminum
• Friction Plate: Replaceable 1050 Steel (Heat-Treated)
• Ring Gear: Hardened 1050 Steel
• Fasteners: Military-spec hardware for maximum reliability
• Weight: 40-60% lighter than OE for reduced MOI
• Part Number: 130131

Fits 1994-1999 Toyota Celica GT and ST models.

The Fidanza Short Throw Shifter (MPN 891940) is engineered to reduce gear lever travel, providing a shorter, more precise throw for improved shift feel and faster engagement. This shifter replaces the factory assembly, eliminating the vague, long-throw characteristics of the original equipment while maintaining compatibility with your factory shift boot and interior trim.

• Direct bolt-on replacement for factory shifter assembly
• Reduced throw distance for quicker gear changes
• Compatible with standard hand tools for driveway installation
• Retains factory mounting points and hardware compatibility
• Manufacturer Part Number: 891940

Designed for a straightforward installation, this short throw shifter can be installed in an afternoon, offering a tactile mechanical upgrade to your Celica's drivetrain without requiring permanent vehicle modifications.

Fits select 1988-2001 Acura Integra, Honda Civic, CRX, and Civic del Sol models.

Enhance your vehicle's shifting performance with the Fidanza Short Throw Shifter (MPN 891812). Designed to reduce the distance the gear lever travels between gates, this shifter provides a significantly shorter throw compared to the factory unit. By modifying the pivot point geometry, it enables a more precise, mechanical engagement that allows for quicker transitions and improved driver feedback during spirited driving.

This shifter is engineered as a direct replacement for the factory lever, designed to work with your existing shift linkage for a straightforward installation. Whether you are daily driving or on the track, the reduced shift arc provides a more connected feel to the transmission.

• Reduces shift throw for faster, more precise gear changes
• Direct replacement for the factory shifter lever
• Optimized geometry improves tactile feedback and shift engagement
• Compatible with OEM shift linkage and hardware
• Manufacturer Part Number: 891812

Fits 1995-2001 Nissan Maxima and 1996-2001 Infiniti I30 models. This Fidanza aluminum flywheel (MPN 143991) is engineered to reduce rotational mass, providing a significant 40-60% weight reduction compared to heavy factory cast-iron units. By lowering the Moment of Inertia (MOI), this flywheel allows the engine to rev more freely, resulting in faster throttle response and improved acceleration across the RPM range.

• Constructed from high-strength billet 6061 T6 or 2024 T4 aluminum for lightweight durability
• Heat-treated friction plate provides optimum clutch grip and is bolt-on replaceable for easy servicing
• Hardened 1050 steel ring gear ensures reliable starter engagement and long-term service life
• Assembled with military-spec fasteners for superior strength and reliability under performance conditions
• Features stepped dowels where required for precise alignment and fitment

Note: When selecting a replacement friction kit, confirm the specific bolt pattern for this flywheel. Always follow the included installation instructions and technical bulletins for proper setup.

Fits select 1956-1967 MG MGA and MGB (Base / GT).

The Fidanza 126991 lightweight aluminum flywheel is engineered to reduce rotational mass, allowing your engine to transfer more power to the wheels. CNC-machined from high-strength billet 6061 T6 or 2024 T4 aluminum, this flywheel is approximately 40% to 60% lighter than factory units. This significant reduction in the Moment of Inertia (MOI) results in faster throttle response and improved acceleration across the RPM range.

Unlike traditional flywheels, this Fidanza unit features a bolt-on replaceable friction plate made from 1045 or 1050 steel, eliminating the need for resurfacing or total replacement during clutch service. The friction surface is heat-treated for maximum grip and long-term durability under high-performance driving conditions.

• Manufacturer Part Number: 126991
• Body Material: Billet 6061 T6 or 2024 T4 Aluminum
• Friction Plate: Replaceable hardened 1050 steel secured with military-spec fasteners
• Ring Gear: Replaceable hardened 1050 steel
• Performance: 40-60% lighter than stock for lower MOI and quicker acceleration
• Installation: Direct bolt-on design with stepped dowels for precise alignment

Fits 1968-1980 MG MGB Base, GT, MK IV, and V-8 models (1.8L).

The Fidanza 126801 aluminum flywheel is engineered to significantly reduce rotational mass, weighing 40-60% less than the factory cast iron unit. Constructed from high-strength billet 6061-T6 or 2024-T4 aluminum, this flywheel lowers the Moment of Inertia (MOI) to provide faster throttle response and quicker acceleration by freeing up horsepower otherwise lost to parasitic drag.

Designed for longevity and serviceability, this unit features a replaceable 1050 steel ring gear and a bolt-on heat-treated friction plate, allowing for easy refreshes without replacing the entire flywheel. The assembly is secured with military-spec fasteners to ensure maximum reliability under high-RPM conditions.

• Manufacturer Part Number: 126801
• Tooth Count: 127-Tooth
• Engine Compatibility: 5-Main Bearing / 1.8L
• Transmission Compatibility: 4-Synchro
• Material: Billet 6061-T6 or 2024-T4 Aluminum body
• Friction Surface: Replaceable hardened 1050 steel
• Hardware: Military-spec fasteners and stepped dowels

Fits select 2001-2006 Chrysler PT Cruiser and 2003-2005 Dodge Neon SRT-4. Note: These DOHC engines require two cam gears for a complete installation.

The Fidanza 994244 adjustable cam gear provides the precision required to dial in your engine's power band. CNC-machined from high-grade 6061 T6 billet aluminum, this lightweight gear allows for up to 12 degrees of advance or retard. Laser-etched timing marks ensure accurate tuning, while the stainless steel hardware provides a secure lockdown to prevent timing slip under high RPMs.

To ensure long-term reliability and belt health, the outer gear teeth are beveled and hard-anodized. This process reduces friction and wear on the timing belt, extending service life even in performance applications.

• Precision adjustable with +/- 12 degrees of timing range
• Machined from 6061 T6 billet aluminum for reduced rotational mass
• Hard-anodized and beveled teeth for maximum belt longevity
• Laser-etched timing marks for repeatable, precise adjustments
• Stainless steel hardware included for secure fitment
• Finished in silver (natural aluminum)
• Manufacturer Part Number: 994244

Fits select 1995-1999 Chrysler Sebring, Dodge Avenger, Dodge/Plymouth Neon, Eagle Talon, and Mitsubishi Eclipse (2.0L).

The Fidanza adjustable cam gear allows for precise tuning of your engine's power band. By providing +/- 12 degrees of both advance and retard, this gear enables tuners to optimize cam timing for increased horsepower and torque across the RPM range. Each gear is CNC machined from high-grade 6061 T6 billet aluminum for a lightweight design that reduces rotational mass without sacrificing durability.

• Hard-anodized and beveled outer gear teeth for extended timing belt life.
• Precision adjustable with 12 degrees of advance and retard.
• Laser-etched timing marks for accurate and repeatable tuning.
• High-strength stainless steel hardware ensures a secure lockdown.
• Machined from 6061 T6 billet aluminum with a silver finish.
• Manufacturer Part Number: 994204

Fits 1987-1993 Toyota Supra Base, Turbo, and Twin Turbo.

The Fidanza 930774 silver adjustable cam gear provides the precision necessary to dial in your engine's power band. Machined from high-grade 6061 T6 billet aluminum, this gear is designed for both durability and weight reduction. The outer gear teeth are hard-anodized and beveled to increase timing belt longevity and prevent premature wear. This lightweight design reduces rotational mass, improving throttle response and efficiency.

With 12 degrees of both advance and retard, this gear allows for precise tuning of camshaft timing to maximize horsepower and torque. The assembly features stainless steel hardware to ensure a secure lockdown after adjustment, while laser-etched timing marks provide clear, accurate reference points during the tuning process. Each gear is CNC machined for exact fitment and reliable performance under high-stress conditions.

• Manufacturer Part Number: 930774
• CNC machined from 6061 T6 billet aluminum for high strength
• Hard-anodized and beveled teeth for extended timing belt life
• +/- 12 degrees of timing adjustment for precise tuning
• Stainless steel adjustment hardware for secure lockdown
• Laser-etched timing marks for accurate calibration
• Lightweight design to reduce rotational mass
• Silver aluminum finish
• Note: This application requires two (2) cam gears per engine

Fits select 2000-2008 Toyota Echo and Yaris.

The Fidanza 891944 short throw shifter is designed to reduce the distance your hand travels between gears, providing a more precise, mechanical feel and faster gear engagement. By optimizing the leverage and pivot points of the factory linkage, this kit replaces the stock shifter assembly to eliminate the vague or "rubbery" sensation often found in OE shifters.

• Significant reduction in shift throw for quicker transitions
• Constructed for durability and consistent shifting performance
• Direct-fit replacement for the factory shifter assembly
• Simple installation using standard hand tools
• Manufacturer Part Number: 891944

Designed for the DIY enthusiast, this shifter can typically be installed in an afternoon in your driveway or garage.

Fits 1997-2003 Toyota Camry (CE, LE, XLE) and 1999-2003 Toyota Solara SE.

The Fidanza short throw shifter (MPN 891938) is engineered to reduce the distance your gear lever travels, providing a more precise and mechanical feel compared to the factory unit. By optimizing shift geometry, this component allows for quicker gear engagement and a more responsive driving experience. It is designed as a direct replacement for the original shifter assembly, maintaining compatibility with standard interior components.

• Reduces shift throw distance for faster, crisper gear changes
• Engineered for precise fitment and improved shift gate feel
• Direct-fit design compatible with factory shift knobs
• DIY-friendly installation can be completed with basic hand tools
• Manufacturer Part Number: 891938

Built for durability and performance, this shifter solves the problem of the vague, long-ratio shifts found in high-mileage OE assemblies. It is an ideal upgrade for enthusiasts looking to tighten up their drivetrain interface during a weekend project.

Fits 2001-2013 Audi A4 and S4 models including Base, Quattro, Avant, and Cabriolet trims.

The Fidanza short throw shifter is engineered to significantly reduce gear travel, allowing for faster and more precise shifts. By replacing the stock shifter with this precision-machined unit, you gain a more direct mechanical feel and improved response, essential for both street performance and track applications. This bolt-in upgrade utilizes high-quality materials to ensure durability and a crisp engagement every time you change gears.

• Reduces shift throw distance for quicker gear engagement
• Precision-machined for exact fitment and longevity
• Direct replacement for the factory shifter assembly
• Improves tactile feedback and shifting precision
• Manufacturer Part Number: 891869

Fits 1991-1996 Dodge Stealth and 1991-1999 Mitsubishi 3000GT models, including VR-4 and R/T Turbo trims.

Improve your vehicle's shift feel and response with the Fidanza Short Throw Shifter (MPN 891868). This performance upgrade is designed to replace the original factory shift lever, significantly reducing the throw distance required to engage gears. By shortening the shift gate travel, it provides a tighter, more precise gear selection that is essential for both spirited street driving and track applications.

• Reduces shift throw distance for faster, more accurate gear changes
• Direct-fit replacement for the original equipment shifter
• Optimized geometry for improved tactile feedback
• Manufacturer Part Number: 891868

The Fidanza 891863 Short Throw Shifter is engineered to enhance the driving dynamics of the 2002-2005 Lexus IS300 Base by reducing shift throw for quicker, more precise gear transitions. By optimizing the shifter's geometry, this upgrade provides a crisper feel and improves tactile engagement during every shift.

Designed for a straightforward installation, this short throw shifter can be installed in a single afternoon using common hand tools. It serves as a direct upgrade over the loose or vague feeling of a high-mileage factory assembly, offering a much tighter and more mechanical shifting experience.

• Fits 2002-2005 Lexus IS300 Base
• Reduces throw distance for faster, more accurate gear changes
• Direct bolt-on replacement for the factory shifter
• Simple installation achievable with basic hand tools
• Manufacturer Part Number: 891863

Fits 2000-2003 BMW 323, 325, 328, 330, and M3 (E46).

The Fidanza short throw shifter (MPN 891854) is engineered to enhance the driving dynamics of your BMW E46 by significantly reducing the travel distance between gears. This modification provides a tighter, more mechanical feel and allows for faster gear engagement during spirited driving. Designed as a direct-fit replacement for the factory assembly, it maintains proper ergonomics while sharpening shifter response.

• Reduces shift throw for faster, more precise gear changes
• Direct replacement for the factory shifter assembly
• Engineered for a positive, mechanical engagement feel
• Straightforward installation can be completed with basic hand tools
• Manufacturer Part Number: 891854

Fits 2004-2005 Scion xA and xB Base models.

Improve the driving dynamics and shifting precision of your Scion with the Fidanza Short Throw Shifter. Designed as a direct replacement for the original equipment, this shifter reduces the distance your hand travels between gears to provide a shorter, crisper engagement during gear changes.

• Reduces shift throw for faster, more accurate gear selection
• Direct-fit design maintains factory console height and ergonomics
• Engineered for a straightforward installation that can be completed in an afternoon
• Designed for use with standard hand tools in a home garage or driveway
• Manufacturer Part Number: 891850

Vehicle Fitment:

• 2004-2005 Scion xA Base
• 2004-2005 Scion xB Base

Fits 1997-2004 Chevrolet Corvette Base, Z06, 50th Anniversary, and Indianapolis 500 Pace Car models.

Improve your driving experience with the Fidanza Short Throw Shifter (MPN 891847). This component is engineered to reduce the distance of the shift throw, providing a more precise and mechanical feel compared to the factory assembly. It is a direct replacement part designed for enthusiasts who want quicker gear engagement and improved shift accuracy during spirited driving.

• Reduces shift throw for faster, more positive gear changes
• Direct-fit replacement for the original equipment shifter
• Compatible with factory mounting points and hardware
• Can be installed in an afternoon using standard hand tools
• Manufacturer Part Number: 891847

Constructed for durability and consistent performance, this shifter solves the vague, long-throw feel of the stock unit, making it a functional upgrade for any 1997-2004 Corvette owner.

Fits 2005-2008 Scion tC Base and Spec models.

Upgrade your driving experience with the Fidanza short throw shifter (MPN 891846). This component is designed to replace the factory shift lever, significantly reducing the distance the shifter travels between gears. By shortening the shift throw, it provides a more precise, mechanical feel and allows for quicker gear transitions during spirited driving.

• Reduces shift throw for faster, more accurate gear changes
• Direct-fit replacement for the original equipment shifter
• Designed for straightforward installation in a home garage using basic hand tools
• Retains factory shift knob compatibility in most applications
• Manufacturer Part Number: 891846