The Z Locker Power Harness is a specialized wiring solution designed to integrate with the Tazer programmer ecosystem. This harness provides the dedicated power delivery required to engage electronic axle lockers independently of factory software restrictions. By installing this harness, you gain the ability to utilize your lockers in various drive modes as permitted by the Tazer interface, providing essential traction control for technical off-road maneuvers.

• Enables independent front and rear locker control when paired with a Tazer programmer
• Constructed with automotive-grade connectors for a secure, weather-resistant connection
• High-quality protective looming resists heat and abrasion in harsh under-vehicle environments
• Provides the necessary electrical path to bypass factory locker engagement limitations
• Direct integration with factory locker solenoids

Fits select 2015-2021 Dodge Challenger, Charger, and Durango, and 2014-2021 Jeep Grand Cherokee.

The Z Automotive Tazer (MPN Z_TZR) is an essential OBDII plug-in module for enthusiasts looking to unlock the full potential of their vehicle's electronic systems. By communicating directly with the factory computer, this programmer enables hidden features typically reserved for higher trim levels or SRT models, providing a customized driving experience without the need for permanent hardware modifications.

Designed for easy installation, the Tazer plugs into the vehicle's OBDII port to grant access to a wide array of performance and convenience settings, such as enabling Performance Pages, adjusting lighting sequences, and managing camera inputs. It is a proven solution for owners who want to bridge the gap between standard factory settings and high-performance functionality.

• Vehicle Compatibility: 2015-2021 Dodge Challenger, Charger, Durango; 2014-2021 Jeep Grand Cherokee
• Installation: Simple plug-and-play via the OBDII port
• Feature Set: Unlocks performance menus, light shows, and navigation-in-motion capabilities
• Manufacturer Part Number: Z_TZR

Fits select 2005-2017 FCA (Stellantis) vehicles.

The Z Automotive Tazer OBDII T-Harness is engineered for enthusiasts who want a clean, professional installation of their Tazer programmer. This T-harness (MPN: Z_OBD_T) allows you to connect your device behind the dashboard, effectively relocating the connection point and keeping the factory OBDII port open for dealership scan tools, state inspections, or other diagnostic equipment.

• Allows for a completely hidden installation of Tazer modules
• Preserves access to the primary factory OBDII port for other uses
• Direct plug-and-play wiring simplifies the installation process
• High-quality connectors ensure consistent data transmission and fitment
• Manufacturer Part Number: Z_OBD_T

Fits 2015-2021 Dodge Challenger and Charger.

The Z Automotive BurnBox G2 (Z_BB_G2) provides enthusiasts with precise control over their vehicle's braking and lighting systems via a simple plug-and-play connection. This electronic module integrates with factory systems to provide a dedicated line lock function, simplifying tire heating at the track by locking the front brakes while allowing the rear tires to spin freely. Beyond performance features, the BurnBox G2 includes a Light Show mode, utilizing factory exterior lighting for multiple pre-set and customizable patterns.

• Integrated Line Lock for simplified burnouts and staging
• Light Show mode with multiple flash patterns for car shows and off-road use
• Simple plug-and-play installation through the vehicle's OBDII port
• Configurable via factory steering wheel buttons
• Manufacturer Part Number: Z_BB_G2

Fits 2008-2014 Dodge Challenger and 2006-2010 Dodge Charger models equipped with the NAG1 5-speed automatic transmission.

The Tazer TranZformer Gen 1 Shift Kit is an electronic performance upgrade designed to optimize the shifting characteristics of the Chrysler NAG1 (WA580) transmission. This kit provides the ability to adjust shift firmness for crisper, faster gear changes, bridging the gap between factory street comfort and aggressive track performance. By modifying the signals to the transmission control module, it allows for a more responsive driving experience without the need for internal mechanical modifications or solenoid replacements.

• Adjustable shift firmness for customized transmission feel
• Reduces shift lag for improved throttle response and acceleration
• Designed specifically for the NAG1 5-speed automatic gearbox
• Engineered for seamless electronic integration with L-platform vehicles
• Manufacturer Part Number: Z_TZ_G1

Fits select 2018-2022 Chrysler, Dodge, Jeep, and Ram vehicles equipped with a Security Gateway.

The Z Automotive Z_SGW Security Gateway (SGW) Bypass Module is an essential component for owners of late-model Stellantis vehicles who want to unlock full diagnostic and programming capabilities. Starting in 2018, many vehicles were equipped with a Security Gateway module that prevents aftermarket scan tools and programmers from writing data or making changes to the vehicle via the OBDII port.

This bypass module restores full bidirectional communication by plugging directly into the factory SGW harness. This allows aftermarket devices like the Tazer programmer, diagnostic scanners, and flash tuners to function as intended. It is a necessary addition for any DIY maintenance, custom programming, or when using a Tazer to unlock performance features.

• Manufacturer Part Number: Z_SGW
• Enables full write access through the factory OBDII port
• Required for Tazer functionality on 2018-2022 models
• Simple plug-and-play installation into the factory harness
• Compatible with aftermarket scan tools and tuning devices

Fits select 2018-2022 Jeep Wrangler JL (excluding 4xe and 392 models).

Improve your off-road visibility and trail safety with the Tazer Grille-Mounted Front Camera Kit. This kit is engineered to provide a clear, forward-facing perspective that helps drivers navigate technical obstacles and tight parking spots that are normally obstructed by the JL's hood line. By mounting directly into the factory grille, it offers a clean, integrated appearance while providing the visual data needed for confident maneuvering.

• Designed specifically for the Jeep Wrangler JL platform
• Low-profile grille mount for a discreet, factory-style installation
• Enhances safety on the trail and in urban environments
• Excludes 4xe (plug-in hybrid) and 392 (6.4L V8) models
• Manufacturer Part Number: Z_JL_CAM

Fits 2017-2021 Dodge Challenger, Charger, and Durango, and 2017-2021 Jeep Grand Cherokee.

These Type B Aux Buttons from Tazer provide a clean, integrated solution for controlling vehicle functions via your Tazer programmer. Instead of navigating through instrument cluster menus, these physical switches allow for immediate activation of programmed features, mimicking a factory-installed auxiliary switch bank.

• Manufacturer Part Number: Z_AUX_B
• Configuration: Type B
• Enables quick-access control for Tazer-mapped functions
• Engineered for seamless integration with existing vehicle interior trim
• Includes necessary wiring for a straightforward installation

Fits 2015-2017 Dodge Challenger, Charger, Durango, and Jeep Grand Cherokee.

The Z Automotive Tazer Aux Buttons (Type A) provide a tactile, physical interface for controlling your Tazer programmer’s most popular features. Instead of navigating through instrument cluster menus while driving, these auxiliary buttons allow for instant activation of functions such as Line Lock, Light Shows, or camera toggles. Designed for seamless interior integration, this Type A button bank replaces factory blanks to maintain a clean, OEM-inspired aesthetic while adding professional-grade functional control to your cockpit.

• Provides direct physical switch access for Tazer-enabled features
• Specifically designed for Type A dashboard configurations
• Integrates with existing Z Automotive Tazer hardware
• Maintains factory interior appearance by replacing unused blanks
• Manufacturer Part Number: Z_AUX_A

Fits 2018-2023 Jeep Wrangler and 2020-2023 Jeep Gladiator models.

The Z Automotive Z Locker Extension Cable provides the necessary length to relocate or more easily access your locker connection when using a Tazer programmer. Designed specifically for the JL and JT platforms, this cable simplifies the installation of the Z Locker OEM bypass or control functions by extending the factory-style harness.

• Direct plug-and-play installation into factory locker connectors
• Relocates locker interface for cleaner cable management or easier access
• Maintains signal integrity for reliable locker engagement
• Designed for use with Z Automotive Tazer hardware
• Manufacturer Part Number: Z_LKR_EXT

Fits 2020-2024 Jeep Wrangler JL and Gladiator JT.

The Tazer AuxZiliary Kit (Z_JL_AUX) is a hardware expansion designed to provide seamless control over external 12V accessories. This kit integrates directly with your existing Tazer JL or Tazer JT programmer, allowing you to trigger electrical components like off-road lighting, lockers, or air compressors through the vehicle's factory interface without installing bulky aftermarket switch pods.

• Expands Tazer functionality for external accessory management
• Includes vehicle-specific wiring harness and connectors
• Provides a clean, professional installation in the engine bay
• Ideal for vehicles not equipped with the factory auxiliary switch bank
• Manufacturer Part Number: Z_JL_AUX

Fits 2014-2017 Jeep Grand Cherokee and 2015-2017 Dodge Challenger, Charger, and Durango.

The Tazer Single AV Input Cable (MPN: Z_VID) is designed to integrate an external video and audio source directly into your vehicle's factory Uconnect system. This specialized harness works in conjunction with the Tazer programmer to utilize the video-in capabilities of your dashboard display, providing a clean solution for adding aftermarket electronics without cutting factory wires.

• Adds one composite video input and stereo audio (L/R) inputs to the factory screen.
• Essential for installing front-facing cameras or external media players.
• Pins directly into the factory radio harness for a secure, professional installation.
• Designed specifically for use with Z Automotive Tazer calibration tools.
• Manufacturer Part Number: Z_VID.

Fits select 2013-2021 RAM 1500 Classic, 2500, and 3500 models.

The Z Automotive Tazer RAM (MPN: Z_TZR_RAM) is a powerful plug-and-play programmer designed to unlock hidden features and calibrate essential vehicle parameters. By connecting directly to the OBDII port, this module allows truck owners to take full control over factory electronic settings that are normally restricted.

• Calibration: Adjust tire size for accurate speedometer readings after installing larger tires and modify TPMS thresholds.
• Lighting Controls: Enable factory fog lights, set up LED replacements without hyper-flash, and access the signature Light Show mode.
• Feature Unlocking: Enable backup cameras, auxiliary switches, and other factory options.
• Performance Tools: Access Line Lock for track use and other diagnostic functions.
• Easy Installation: Simply plugs into the factory OBDII port; can be easily removed to return the vehicle to stock settings.

Whether you are compensating for mechanical upgrades or simply want to customize your truck's lighting and convenience features, the Tazer RAM provides a professional-grade interface for total vehicle personalization.

Fits 2018-2022 Jeep Wrangler JL and 2020-2022 Jeep Gladiator (JT).

The Z Automotive Tazer JL Mini Programmer (Z_TZR_JLM) is an essential electronic calibration tool for late-model Jeep owners. Designed to interface directly with the vehicle's computer system, this compact module allows for the adjustment of factory parameters to accommodate aftermarket modifications and unlock hidden features. Whether you are correcting the speedometer for larger tires or re-calibrating for new gear ratios, the Tazer JL Mini provides a seamless solution for vehicle customization.

• Compatible with 2018-2022 Jeep Wrangler JL models
• Compatible with 2020-2022 Jeep Gladiator JT models
• User-friendly interface for adjusting vehicle electronic settings
• Direct integration with factory diagnostic systems
• Manufacturer Part Number: Z_TZR_JLM

Fits 2018-2022 Jeep Wrangler JL and 2020-2022 Jeep Gladiator.

The Tazer JL Lite (MPN: Z_TZR_JLL) is a specialized calibration tool designed for Jeep owners who have modified their vehicles with larger tires or different gear ratios. By plugging directly into the factory OBDII port, this programmer allows you to correct the speedometer and odometer, ensuring accurate readings and proper transmission shift points. It serves as an essential interface for unlocking factory features and customizing vehicle behavior without permanent modifications.

• Calibrate tire sizes up to 41 inches for accurate speedometer readout
• Adjust gear ratios to maintain factory-like shift performance
• Configure TPMS settings, including alert toggles and pressure thresholds
• Enable or disable Auto Start/Stop settings for driver preference
• Modify lighting configurations, including LED retrofits and Light Show mode
• Simple plug-and-play installation into the vehicle diagnostic port

Built for reliability and ease of use, the Tazer JL Lite is the go-to solution for Jeep enthusiasts who need a professional-grade calibration tool that preserves factory drivability after aftermarket upgrades.

Fits 2019-2021 RAM 1500 DT and 2021 RAM TRX.

The Tazer DT Programmer (Z_TZR_DT) is a powerful electronic module designed to unlock the hidden capabilities and factory features of your fifth-generation RAM truck. By interfacing with the vehicle's onboard communication system, this programmer allows enthusiasts to activate performance pages, modify lighting configurations, and adjust vehicle settings that are otherwise locked from the factory.

• Unlocks Performance Pages on the factory dash screen.
• Enables Light Show mode for display purposes and LED conversions.
• Navigation in Motion allows for address input while driving.
• Provides Auto Stop/Start memory to save your preferred setting.
• Adjusts TPMS thresholds and tire size for speedometer correction.
• Manufacturer Part Number: Z_TZR_DT

Engineered for the 2019-2021 RAM 1500 DT platform, including the high-performance TRX, this programmer is a simple plug-and-play solution that integrates with the existing wiring harness without permanent modifications to the factory ECU.

The Tazer SGW Extension Cable (MPN: Z_SGW_EXT) is designed for select 2018-2022 Jeep Wrangler, Gladiator, and RAM 1500/TRX models equipped with a Security Gateway Module. This extension cable simplifies the installation of Tazer programmers and other diagnostic tools by relocating the SGW port to a more accessible location, eliminating the need to reach deep behind the dashboard or disassemble interior panels every time you need to connect or disconnect your device.

Built with high-quality connectors and wiring to ensure reliable data transmission, this cable protects your factory ports from excessive wear and tear. It is a must-have for users who frequently swap devices or perform diagnostic updates.

• Relocates or extends access to the Security Gateway (SGW) module
• Simplifies the installation and removal of Tazer JL and DT programmers
• Reduces the need for dash disassembly during tool connection
• Maintains secure data connection for reliable programming
• Manufacturer Part Number: Z_SGW_EXT

Fits 2018-2022 Jeep Wrangler, 2020-2022 Jeep Gladiator, 2019-2022 RAM 1500, and 2021-2022 RAM TRX.

Fits 2018-2024 RAM 1500, 2500, and 3500 trucks.

The Tazer OBDII T-Bypass Harness (Long) is a specialized solution for owners of 2018 and newer RAM trucks who need to bypass the factory Security Gateway Module (SGW). Starting in the 2018 model year, RAM vehicles were equipped with an SGW that blocks aftermarket diagnostic tools and programmers from sending commands through the OBDII port. This bypass harness restores full communication, allowing you to use your Tazer RAM device or other OBDII tools without restriction.

The "Long" variant of this harness is engineered for easier installation and cable management. By tapping directly into the factory SGW connection behind the dashboard, it provides a clean "T" junction. This allows the Tazer module to remain plugged in and tucked away, leaving your factory OBDII port available for other uses or ensuring a stealthy, secure installation.

• Directly replaces the need for a standard SGW bypass block with an integrated T-harness.
• Enables full two-way communication for Tazer RAM, tuners, and diagnostic scanners.
• Extra cable length facilitates flexible mounting and easier access during install.
• Utilizes factory-style connectors for a secure, plug-and-play fit.
• Manufacturer Part Number: Z_OBD_T_LONG

Fits select 2005-2010 Chrysler 300, 2008-2014 Dodge Challenger, and 2006-2010 Dodge Charger.

The Tazer No ESP Traction Control Module (MPN: Z_NOESP) allows enthusiasts to fully disable the Electronic Stability Program and traction control on their vehicle. This module is essential for performance driving, drag racing, or track events where factory computer intervention limits power delivery and slide control. By overriding the factory settings, it provides the driver with raw control over the vehicle's handling characteristics without interference from the stability management system.

• Enables full ESP and traction control disablement for track use
• Compatible with 2005-2014 Chrysler and Dodge LX/LC platforms
• Allows for unhindered power delivery during performance maneuvers
• Manufacturer Part Number: Z_NOESP

Fits select 2021-2024 RAM 1500, 2500, and 3500 trucks.

The Tazer Z_MIM_PS_A ParkSense Fix Kit is a specialized hardware solution designed to resolve sensor errors and system conflicts on late-model RAM trucks. This kit is specifically engineered for vehicles experiencing parking sensor issues or "Service ParkSense" warnings that often arise after installing a Tazer programmer or other electronic modifications that alter the vehicle's factory sensor logic.

By restoring proper communication between the sensor array and the onboard computer, this kit ensures your parking assistance features operate reliably without persistent dashboard errors or system disablement.

• Restores factory ParkSense functionality on 2021+ RAM trucks
• Corrects sensor communication errors caused by aftermarket programmers
• Integrates directly with factory wiring for a secure installation
• Includes all necessary components to clear persistent ParkSense warnings
• Manufacturer Part Number: Z_MIM_PS_A

The Z-Automotive Tazer NoLimitz JL Cable Kit is a specialized wiring solution designed for Jeep Wrangler JL owners seeking greater control over their factory electronic sway bar. This kit provides the essential hardware connection required to utilize NoLimitz functionality, allowing you to bypass restrictive factory speed and drive-mode limitations on your sway bar disconnect (SBD) system.

• Engineered for direct compatibility with Jeep Wrangler JL electrical systems.
• Enables sway bar disconnection in 2WD, 4WD High, and at speeds above the factory threshold.
• High-quality connectors and protective loom for long-term off-road reliability.
• Integrates seamlessly with the Tazer programmer ecosystem.
• Manufacturer Part Number: Z_MIM_NL_JL

This cable kit is a critical component for off-road enthusiasts who require maximum articulation on the trail without the electronic intervention of the stock ECU.

The Tazer RAM NoLimitz DT Cable Kit is an essential connectivity solution for 2018+ RAM DT owners looking to integrate Tazer modules into their vehicle's electronics system. This specialized wiring harness provides a secure, direct link to the vehicle architecture, enabling the communication necessary to bypass factory limitations and access advanced configuration settings.

• Fits select 2018+ RAM trucks (DT chassis).
• Specifically engineered for the NoLimitz feature set on RAM DT platforms.
• Plug-and-play design simplifies installation and maintains circuit integrity.
• Durable automotive-grade connectors designed for long-term vibration resistance.
• Manufacturer Part Number: Z_MIM_NL_DT

Fits 2018-2023 Jeep Wrangler JL and 2020-2023 Jeep Gladiator JT models.

The Z Automotive Z Locker OEM is a specialized bypass solution designed to address the common "Service Axle Locker" warning light found on late-model Jeeps. When the internal position sensor in the factory locker fails, the vehicle's computer disables locker engagement and triggers a dash error. This module plugs directly into the factory axle harness, bypassing the faulty sensor to restore full locker functionality without the need for a costly axle teardown or actuator replacement.

• Fixes the "Service Axle Locker" dash error and restores locker operation
• 100% plug-and-play installation at the axle housing
• Prevents the need for expensive OEM locker actuator or whole axle replacement
• Maintains factory locker engagement and dashboard indicator behavior
• Manufacturer Part Number: Z_LKR_OEM

Fits 2018-2023 Jeep Wrangler JL and 2020-2023 Jeep Gladiator JT.

The Z Automotive Tazer Z Locker Controller (MPN: Z_LKR_CTLR) provides off-road enthusiasts with total manual control over factory electronic lockers. Designed to bypass restrictive factory parameters, this module allows you to engage your front and rear lockers in 2HI, 4HI, or 4LO, and at any vehicle speed.

Whether you are tackling high-speed sand dunes or need lockers engaged before hitting a technical obstacle in 4HI, this controller ensures your Jeep's drivetrain responds to your inputs rather than pre-programmed safety limits. It installs easily by plugging into the factory harness, maintaining a clean setup without permanent modifications.

• Enables locker engagement in 2HI, 4HI, and 4LO modes
• Removes factory speed limitations for differential locking
• Plug-and-play installation into the factory wiring harness
• Retains use of factory dash switches for intuitive operation
• Manufacturer Part Number: Z_LKR_CTLR

Fits select 2020-2022 Jeep Gladiator (JT) and Wrangler (JL) models, including 4XE and 392 trims.

The Tazer Grille Mounted Front Camera Kit (MPN Z_JT_CAM) provides essential forward visibility for navigating technical off-road trails or tight parking spaces. This kit allows you to add a front-facing camera feed directly to your factory display, using a discreet mounting solution that maintains the vehicle's rugged aesthetic. Engineered for durability and clear imaging, it serves as a critical upgrade for drivers who need a better view of obstacles immediately in front of the bumper.

• Specifically designed for 2020-2022 Jeep Gladiator and Wrangler JL (4XE/392) models.
• Custom-molded grille bracket ensures a secure, factory-style fitment.
• High-resolution camera module optimized for outdoor environments.
• Integrates with existing vehicle electronics for streamlined operation.
• Manufacturer Part Number: Z_JT_CAM

Fits 2007-2018 Jeep Wrangler JK.

The Z Automotive Tazer JK Blaster is a powerful OBDII calibration and feature-enablement tool designed specifically for the Jeep Wrangler JK platform. This plug-and-play module (MPN Z_JK_BLSTR) allows owners to recalibrate the vehicle computer to accommodate common off-road modifications while unlocking hidden factory features and custom lighting functions.

• Calibrate speedometer for tire sizes up to 42 inches
• Adjust gear ratios for improved shift logic after axle swaps
• Read and clear engine diagnostic trouble codes (DTCs)
• Configure Daytime Running Light (DRL) settings and locations
• Enable or disable Tire Pressure Monitoring System (TPMS) alerts
• Activate custom "Light Show" modes for off-road or display use
• One-touch lane change toggle and other convenience settings
• Plugs directly into the factory OBDII port for easy installation

Fits select 2015-2017 Dodge Challenger and Charger, and 2020-2022 Jeep Gladiator and Wrangler models.

The Z Automotive Tazer HDMI AV Input Kit (Type A) allows you to integrate a high-definition video and audio input directly into your vehicle's factory infotainment system. This kit provides the necessary interface to connect external media sources—such as smartphones, tablets, or gaming consoles—to your dashboard display, expanding the utility of your OEM hardware.

• Adds a dedicated HDMI video and audio input to the factory screen
• Type A interface configuration for specific vehicle wiring architectures
• Supports mirroring and media playback from external HDMI devices
• Simplifies the addition of aftermarket cameras or media players
• Manufacturer Part Number: Z_HDMI_KIT_A

Fits 2011-2022 Dodge Charger and 2015-2022 Dodge Challenger models.

The Tazer Trunk Mounted Security Double Bypass Cable Kit (Z_DBP) provides a streamlined connection point for your Tazer module. By relocating the interface to the trunk, this harness bypasses the Security Gateway Module (SGM) to enable full device functionality on later model Mopar vehicles without requiring difficult access behind the dashboard or radio unit.

• Allows for a cleaner, hidden installation of Tazer electronics
• Bypasses factory security gateway for unrestricted module communication
• Trunk-mounted location offers easier access for device removal or updates
• Maintains factory circuit integrity with high-quality connectors
• Manufacturer Part Number: Z_DBP

Fits 2015-2021 Dodge Challenger and Charger Hellcat models.

The Z Automotive Tazer BurnBox Hellcat (MPN: Z_BB_HC) is a specialized electronic module that unlocks hidden performance and utility features within your vehicle's factory systems. Designed for enthusiasts who frequent the drag strip or car shows, this device integrates seamlessly to provide advanced control over braking, lighting, and thermal management via steering wheel button shortcuts.

• Line Lock: Electronically locks the front brakes while leaving the rear wheels free, allowing for easy and controlled burnouts to heat up your tires.
• Light Show: Activate multiple pre-programmed exterior lighting sequences, perfect for car meets and show environments.
• Cooldown Mode: Allows the engine fans and intercooler pumps to continue running after the engine is turned off, significantly reducing heat soak between track passes.
• BurnBox Functionality: Simplifies burnout procedures by automating the brake and throttle coordination.
• Direct Integration: Plugs into the vehicle's factory communication network for reliable operation without permanent wiring changes.

The Z_BB_HC is a must-have tool for SRT Hellcat owners looking to maximize their vehicle's capabilities at the track and on display.