PowerStop is on a mission to deliver an easy way for any driver to upgrade their brakes - no matter where or how they use their vehicle. Our Z36 Truck & Tow Brake Upgrade Kit is recommended for trucks, 4x4s, and SUVs that not only work hard, but play hard as well. This brake pad and rotor kit comes with everything you need, including premium stainless-steel hardware, for an easy, bolt-on installation. The low-dust Ceramic brake pads are reinforced with Carbon-Fiber to provide severe-duty stopping power without sacrificing everyday drivability. These pads are paired with Drilled & Slotted rotors that keep brake temperatures down by maximizing heat dissipation, critical for those long mountain descents. Whether towing a boat or trailer, hauling for the jobsite, or tackling a tough off-road trail, get the easy and affordable, bolt-on performance upgrade with the Z36 Truck & Tow Brake Upgrade Kit.

• Proprietary Carbon-Fiber Ceramic Z36 brake pads enhance the strength of a typical ceramic brake pad compound to handle heavier loads
• This complete brake kit has been engineered to handle the added stress of towing, hauling, mountainous driving and lifted trucks
• Brake rotors, pads & hardware engineered to work together to increase the overall braking power on vehicles with heavier loads
• Low-dust braking validated through on-vehicle 3rd party tests in Los Angeles, showing on average 30% less dust versus OE
• Stainless-steel pad shims resist the increased temperatures common on heavy duty applications
• Includes stainless-steel installation hardware and high-temperature ceramic brake lubricant
• Buy with confidence from the originator & industry leader of brake kits
• Drilled & Slotted performance rotors provide maximum cooling
• Bolt-on upgrade for stock brakes, no modifications necessary
• Rotors are zinc plated for maximum protection against rust.

This Part Fits:

Fits 2021-2024 BMW M4 (G82/G83).

Brembo TS20 performance street pads are engineered for drivers who demand higher thermal capacity and more aggressive response than factory components provide, without sacrificing daily drivability. This compound offers a high initial bite and consistent friction across a wide temperature range, making it the ideal upgrade for the G82 M4 Coupe and G83 M4 Convertible during spirited street use.

These front brake pads are manufactured to Brembo's exacting standards, featuring a 20in thickness for extended wear life and improved heat dissipation under heavy braking loads. They are a direct-fit replacement for the front axle, utilizing the 2466 backing plate profile to ensure a precise fit within the factory calipers.

• Brembo TS20 high-performance street compound
• Position: Front
• Thickness: 20in
• Part Number: 2466
• Fits G82 and G83 chassis generations

Fits 2021+ BMW M4 G82 Coupe and G83 Convertible.

Brembo TS20 Performance Street brake pads are engineered for the enthusiast who demands more thermal capacity and bite than factory equipment provides. Developed as a high-performance street upgrade, the TS20 compound offers superior friction stability across a wider temperature range, making it ideal for spirited driving and heavy-use applications without the excessive noise or rotor wear associated with track-only pads.

These 18mm thick rear pads are a direct-fit replacement for the factory G8X M4 braking system. They provide a more consistent pedal feel and improved modulation, ensuring your BMW's stopping power matches its performance capabilities.

• Brand: Brembo
• Series: TS20 Performance Street
• Part Number: 2427
• Thickness: 18mm
• Position: Rear Axle
• Fitment: 2021+ BMW M4 (G82/G83)
• Improved fade resistance over OE friction materials
• Designed for high-performance street and canyon driving

The Alcon CIR15 AV1 front brake pad set is a specialized friction solution engineered for the high-performance demands of the Dodge RAM 1500 TRX. Formulated with the AV1 compound, these pads are designed to manage the extreme thermal loads generated by a 700+ horsepower truck, providing a consistent pedal feel and aggressive bite. They serve as a precision replacement for pads within Alcon CIR15 caliper systems, offering the durability needed for heavy-duty performance and high-speed deceleration.

• Brand: Alcon
• Part Number: CIR15 AV1
• Series/Caliper Compatibility: CIR15
• Compound: AV1 High-Performance
• Position: Front Axle
• Application: Dodge RAM 1500 TRX
• Features: High thermal stability and fade resistance for heavy-vehicle applications

Fits 2010+ Ford F-150.

The Alcon CIR15 AV1 brake pad set is engineered to deliver professional-grade stopping power and thermal management for the Ford F-150. Utilizing the specialized AV1 friction compound, these front pads are designed to maintain consistent bite and high fade resistance across a wide range of operating temperatures. This makes them a critical upgrade for trucks facing heavy-duty towing, hauling, or increased performance demands that exceed factory equipment capabilities.

• High-performance CIR15 AV1 friction compound for superior stopping power
• Engineered for high thermal stability to eliminate brake fade under load
• Optimized for front axle braking balance and consistent pedal feel
• Direct replacement set for vehicles equipped with Alcon CIR15 series braking systems

The Wilwood BP-30 SmartPad compound is engineered for professional racing applications requiring high initial bite and exceptionally high friction torque. These pads provide a flat torque curve across a wide temperature range, ensuring consistent pedal feel and predictable response under heavy braking loads. This set is built on the 7112 plate profile, a standard for Grand National (GN) style calipers and similar performance housings.

• Manufacturer Part Number: 150-14777K
• Compound: BP-30 High-Torque Race Compound
• Pad Plate Profile: 7112 (GN Series)
• Thickness: 0.49 inches (12.4mm)
• High-temperature fade resistance for competitive track use
• Aggressive friction characteristics for high-grip racing tires

Wilwood BP-22 SmartPad brake pads are engineered for high-performance and competition environments where consistent bite and thermal stability are critical. Designed specifically for Wilwood TX6R calipers, these .755-inch thick pads utilize a medium-high friction metallic compound that provides an aggressive initial response and increased fade resistance under heavy thermal loads.

• Manufacturer: Wilwood
• Product Series: BP-22 SmartPad
• Part Number: 10120-22
• Caliper Fitment: TX6R Series
• Pad Thickness: 0.755in (19.2mm)
• Compound Type: Metallic (Medium-High Friction)

The BP-22 compound is ideal for vehicles requiring a higher temperature range and more stopping power than standard street pads, making them suitable for heavy-duty street performance and track-day applications. These pads offer predictable pedal feel and reliable performance throughout the heat cycle.

Fits 2023-2024 Ford F-250 and F-350 Super Duty.

The Power Stop Z36 Truck & Tow Brake Upgrade Kit is engineered for drivers who push their trucks to the limit. Designed specifically to handle the added stress of towing trailers and hauling heavy payloads, this front axle upgrade provides the thermal stability and increased stopping power necessary for 2023-2024 Ford Super Duty models. It replaces the factory front braking components with a high-performance solution that reduces brake fade during long descents and heavy-duty use.

• Purpose-built for towing, hauling, and heavy-duty truck applications.
• Front axle kit provides a direct-fit upgrade over standard equipment.
• Maintains consistent pedal feel and stopping performance under high-heat conditions.
• Precision-engineered for 2023-2024 Ford F-250 and F-350 Super Duty (All Trims).

Fits 2012-2013 Ford F-250 Super Duty and 2012 Ford F-350 Super Duty. The Power Stop Z36 Truck & Tow Brake Upgrade Kit is engineered for vehicles that face the extreme thermal stresses of towing, hauling, and steep mountain grades. This complete front and rear system replaces factory components with high-performance materials designed to improve stopping distances under heavy loads.

The Z36 carbon-fiber ceramic pads offer a higher coefficient of friction than standard ceramic compounds, providing the bite needed for severe-duty applications while maintaining a low-dust, noise-free profile. They are paired with precision-drilled and slotted rotors that maximize airflow to prevent brake fade and sweep away gas and debris. Each rotor is finished with silver zinc plating to protect against corrosion and maintain a clean appearance behind your wheels.

• Carbon-fiber reinforced ceramic brake pads designed for the added weight of trailers and payloads.
• Drilled and slotted rotors provide superior cooling and heat dissipation during long descents.
• Silver zinc plating protects rotors from rust and corrosion in harsh environments.
• Third-party validated low-dust performance, averaging 30% less dust than original equipment.
• Premium stainless-steel shims and hardware resist high temperatures to prevent brake noise.
• Bolt-on installation to factory mounting points with no vehicle modifications required.
• Includes front and rear rotors, Z36 carbon-fiber ceramic pads, stainless-steel hardware, and high-temperature lubricant.

Fits 2023-2024 Toyota GR Corolla models.

The Hawk Performance HPS 5.0 (High Performance Street) compound is engineered to bridge the gap between track-focused deceleration and daily street manners. These rear brake pads provide significantly more stopping power than factory equipment while maintaining the low-noise and low-dust characteristics required for a daily-driven hot hatch. Utilizing a specialized ferro-composite material, the HPS 5.0 compound offers a shorter stopping distance and a consistent pedal feel through a wide temperature range.

• Advanced ferro-composite compound for increased torque and stopping power
• High fade resistance under spirited driving conditions
• Designed for minimal brake dust and low noise levels
• Consistent pedal feel and predictable modulation
• Extended pad life and rotor-friendly friction profile
• Direct replacement for OEM rear brake pads

Fits select 2021-2026 BMW M2, M3, and M4 models (Base, Competition, CS, and CSL).

The EBC Brakes S26 Stage 26 kit is an engineered brake upgrade designed for high-performance street driving and occasional track use. This kit centers on the high-friction Yellowstuff pad compound, which provides a significantly higher bite and better thermal management than standard OE pads. Designed as a direct bolt-on replacement for factory hardware, the S26 kit ensures consistent stopping power under the increased heat loads experienced during spirited driving on the street or technical track sessions.

• Includes EBC Yellowstuff high-friction brake pads
• Matched performance rotors for optimal pad bedding and wear
• Designed for spirited street, European sport, and track-capable applications
• Direct fit replacement for original equipment components
• Manufacturer Part Number: S26KR1009

Fits select 2021-2026 BMW M2, M3, and M4 models (including Base, Competition, CS, and CSL variants). This EBC Brakes S26 Series kit provides a comprehensive brake system upgrade, pairing high-friction Yellowstuff pads with performance rotors to manage the thermal demands of spirited street driving and track sessions.

The included Yellowstuff compound is engineered for a high friction coefficient, delivering improved initial bite and fade resistance compared to factory components. This kit is specifically designed for high-performance European sport applications where consistent stopping power is required under repeated heavy braking cycles.

• High-friction Yellowstuff pads for increased stopping power and thermal stability
• Performance-matched rotors designed for efficient heat dissipation
• Direct-fit replacement for factory braking components
• Suitable for spirited street use and track-day capability
• Complete front and rear axle kit (check application for specific kit coverage)
• Manufacturer Part Number: S26KF1036

The EBC Brakes S26 kit is engineered for high-performance street and occasional track-day use, pairing the aggressive friction of Yellowstuff pads with the advanced thermal management of SG2F two-piece rotors. This combination effectively reduces brake fade and unsprung weight while ensuring consistent pedal feel under heavy thermal loading.

The included Yellowstuff pads are a high-friction compound that provides a strong initial bite from cold and maintains performance through repeated high-speed stops. For the rotors, the SG2F series utilizes a fully floating design; the high-carbon cast iron rings are mounted to lightweight aluminum hats using EBC’s patented SD-Drive hardware. This construction allows the friction surface to expand and contract independently of the hub, significantly reducing the risk of rotor warping and pedal pulsation during spirited driving.

• Includes high-friction Yellowstuff brake pads and a pair of SG2F two-piece rotors
• Fully floating rotor design prevents thermal warping and reduces unsprung weight
• High-carbon cast iron friction rings with lightweight aluminum hubs
• Ideal for fast street applications and track-day requirements
• Manufacturer Part Number: S26KF1031

Fits select 2012-2020 Audi S3, Volkswagen CC, GTI, and Passat.

The EBC Brakes S26 Kit combines Yellowstuff high-friction pads with SG2F performance rotors to deliver superior stopping power for spirited street driving and track-day applications. This kit replaces worn factory components with high-performance materials designed to manage heat and increase braking torque on European sport models.

Yellowstuff pads feature a high-friction coefficient that provides a strong initial bite and maintains performance under high temperatures. When paired with SG2F rotors, this system ensures consistent pedal feel and reduced brake fade, whether you are navigating a daily commute or pushing the limits on the track. The kit is specifically engineered to handle the demands of fast imports and performance-tuned Volkswagen and Audi platforms.

• Manufacturer Part Number: S26KF1016
• Includes EBC Yellowstuff high-friction brake pads
• Includes a pair of SG2F performance rotors
• Track-capable formulation with excellent cold bite for street use
• Ideal for spirited driving, light track duty, and heavy braking scenarios
• Direct-fit replacement for factory brake systems

Fits 2021-2022 BMW M3 and M4 models (Base, Competition, and Competition xDrive).

Upgrade your BMW’s braking performance with the EBC Brakes S26 kit, combining high-friction Yellowstuff pads with SG2F vented rotors. This package is engineered for the high-performance demands of the G80 M3 and G82 M4, offering a significant improvement in stopping power and thermal management over factory components. Whether for spirited street driving or light track sessions, this kit provides the bite and fade resistance required for heavy M-series vehicles.

• Yellowstuff Brake Pads: A high-friction compound that delivers strong cold bite and maintains performance through high temperatures without the need for a warm-up.
• SG2F Vented Rotors: Precision-machined vented design maximizes heat dissipation to prevent brake fade and rotor warping during aggressive deceleration.
• Direct OE Replacement: Designed to bolt directly into the factory braking system for a straightforward installation.
• Complete Axle Set: Includes both rotors and a matching set of pads for consistent performance across the axle.
• MPN: S26K1011

Fits select 2008-2022 Audi R8 and Lamborghini Gallardo models (including GT, Performance, Plus, Spyder, and LP-series variants).

The EBC Brakes Stage 25 kit is a premium rear braking solution engineered specifically for high-horsepower European prestige and performance vehicles. This kit combines EBC Redstuff ceramic pads with high-performance 2-piece racing rotors to deliver superior thermal management and a significant reduction in brake dust. It is the ideal choice for spirited street driving where maintaining wheel cleanliness and consistent stopping power is a priority.

• Low-Dust Braking: EBC Redstuff ceramic pads are formulated to reduce emitted dust by approximately 80% compared to original equipment pads.
• Advanced 2-Piece Rotors: The racing-spec 2-piece rotor design allows for better heat dissipation and reduced unsprung weight compared to traditional one-piece iron rotors.
• High-HP Capability: Optimized for the thermal demands of mid-engine supercars and heavy-braking scenarios.
• Direct Fitment: Designed to replace factory rear components without modification.
• Manufacturer Part Number: S25KR1002

Each Stage 25 kit includes a complete set of rear Redstuff ceramic brake pads and a pair of 2-piece racing rotors, providing a comprehensive axle upgrade for your vehicle.

Fits 2021-2024 BMW M2, M3, and M4 models including Competition, CS, and CSL variants. This EBC Brakes S25 series kit provides a complete rotor and pad upgrade designed for high-performance street use.

EBC Redstuff ceramic brake pads are engineered specifically for high-horsepower prestige European cars like the G80 and G82 M-series. These pads address the common issue of heavy brake dust, reducing emissions by approximately 80% compared to original equipment pads while maintaining the high-temperature stability required for spirited driving. When paired with EBC's matching rotors, this kit ensures consistent friction levels and improved thermal management over stock components.

• Manufacturer Part Number: S25K1007
• Pad Compound: Redstuff Ceramic (Low Dust)
• Reduces brake dust by up to 80% compared to OEM pads
• Ideal for high-horsepower imports and prestige street vehicles
• Complete kit includes front and rear matched pads and rotors

Fits select 2017-2021 Honda Civic Type R and 2024-2026 Acura Integra (Base, A-Spec, and Type S).

The EBC S13 Brake Pad and Rotor Kit (MPN S13KR1970) is a comprehensive performance upgrade designed to replace worn factory braking components with higher-friction pads and precision-machined rotors. This kit is engineered to deliver improved stopping power and better thermal management, making it an ideal choice for enthusiasts looking to enhance the braking response and reliability of their vehicle during spirited driving or daily commuting.

• Complete axle set includes performance brake pads and matching rotors
• Direct bolt-on installation to factory mounting points and calipers
• Precision-machined rotors ensure smooth operation and reduced vibration
• Performance friction material designed for increased bite and fade resistance
• Manufacturer Part Number: S13KR1970

Fits select 2015-2026 Audi A3/A3 Quattro, BMW i5, and Volkswagen Golf, GTI, and Taos models.

The EBC S13 Yellowstuff Brake Pad and Rotor Kit is a high-efficiency sport upgrade engineered for high-horsepower street cars, SUVs, and trucks under heavy load. This kit replaces worn factory components with a high-friction compound and precision-machined rotors designed to handle increased thermal stress without fade, making it an ideal choice for both performance driving and towing.

• Yellowstuff High-Friction Pads: A versatile performance compound that provides excellent cold bite and remains stable under the high temperatures of short track sessions or heavy-load hauling.
• RK Series Premium Rotors: Precision cast from high-quality G3000 iron, these non-slotted OE-style rotors are cross-ground and balanced for smooth, vibration-free operation.
• Corrosion Protection: Every RK rotor features a thermic black coating to resist oxidation and maintain a clean appearance behind your wheels.
• Verified Quality: All rotors are 100% inspected for run-out and balance.
• Direct Fit: Designed as a direct bolt-on replacement for factory hardware with no modifications required.
• Warranty: Includes a 10,000-mile no-hassle manufacturer warranty.

Kit Includes: Set of Yellowstuff high-friction pads and a pair of thermic-coated premium rotors.

Manufacturer Part Number: S13KR1916

Fits 2017-2024 Honda Civic Type R and Acura Integra Type S.

The EBC Brakes S13 Yellowstuff Pad and RK Rotor Kit is a high-efficiency sport upgrade designed for high-horsepower street cars, SUVs, and performance applications. This kit combines EBC's flagship Yellowstuff high-friction pads with premium RK series non-slotted rotors to deliver superior stopping power under heavy loads, towing conditions, or spirited track sessions.

Yellowstuff pads feature a high-friction compound that performs reliably in high-heat environments, making them an ideal upgrade for both performance driving and heavy-duty utility. The RK rotors are precision cast from high-quality G3000 iron and undergo rigorous machining, balancing, and run-out inspection. Each rotor is finished with a thermic black Geomet coating to provide maximum corrosion resistance and a clean look behind your wheels.

• Direct-fit replacement requires no modifications to stock setup
• Yellowstuff high-friction pads for street, short track, and towing
• RK series premium non-slotted rotors cast from G3000 iron
• Thermic black anti-rust coating for long-term durability
• Cross-ground surface finish for rapid pad bed-in
• Manufacturer Part Number: S13KR1888
• Includes 10,000-mile manufacturer warranty

The EBC Brakes S13 Series Brake Pad and Rotor Kit is a performance-focused braking upgrade designed to provide superior stopping power and enhanced thermal management. This matched set replaces standard factory components with high-friction pads and precision-engineered rotors to reduce brake fade and improve pedal feel during spirited driving or heavy-duty use.

• High-Friction Performance: Features Yellowstuff pads engineered to maintain a high coefficient of friction even under extreme heat for consistent, reliable stopping.
• Slotted and Dimpled Rotors: The GD series rotors utilize wide-aperture slots to draw cool air under the brake pad surface while efficiently removing dust, dirt, and gases.
• Improved Thermal Integrity: Blind-drilled dimples provide cooling benefits without the risk of stress cracks common in fully drilled rotors.
• Corrosion Resistance: Rotors are finished with a protective coating to prevent rust and maintain a clean appearance behind the wheels.
• Direct Fitment: Designed as a bolt-on replacement for original equipment, installing into factory calipers without modification.
• Manufacturer Part Number: S13KR1488

Fits select 2009-2020 Honda Fit and CR-Z models.

The EBC Brakes S13 Brake Pad and Rotor Kit is a high-efficiency sport upgrade designed for light trucks, SUVs, and fast street cars. This comprehensive kit pairs EBC Yellowstuff high-friction pads with premium G3000 OEM-style rotors, delivering significant improvements in stopping power over factory components. The Yellowstuff pads feature EBC's patented Brake-in coating for rapid bedding-in directly after installation, while the rotors are precision balanced and run-out tested to ensure smooth, vibration-free operation.

Engineered for durability and longevity, the rotors are finished with a Geomet thermic anti-rust coating to protect against corrosion in harsh environments. This direct-fit kit requires no modifications to your stock braking setup, making it a straightforward bolt-on solution for drivers seeking better thermal management and bite.

• Manufacturer Part Number: S13KF2230
• Pad Material: Yellowstuff High Friction Compound
• Rotor Material: G3000 Grade Cast Iron
• Finish: Geomet Anti-Rust Thermic Coating
• Direct-fit replacement for stock braking systems
• Includes EBC Brake-in coating for faster pad-to-rotor seating
• Warranty: 10,000 Mile No-Hassle Warranty

Fits select 2002-2016 Acura RSX, Honda Civic, and Honda CR-Z.

The EBC Brakes S13 Brake Pad and Rotor Kit (S13KF2228) is a high-efficiency performance upgrade engineered for fast street cars and spirited driving applications. This kit combines EBC Yellowstuff high-friction pads with premium G 3000 OEM-style rotors to deliver significantly improved stopping power and thermal stability over standard factory setups. These components bolt directly to factory mounting points with no modifications required.

Yellowstuff pads are known for their high heat resistance and fade-free performance, featuring the patented EBC Brake-in surface coating to ensure rapid pad-to-rotor bedding. The included G 3000 rotors are cast from high-grade iron and finished with a Geomet thermic anti-rust coating to protect against corrosion. Each rotor is fully balanced and run-out tested to provide smooth, vibration-free braking performance.

• Direct fit upgrade for improved braking efficiency
• Yellowstuff high-friction pads for superior fade resistance
• Premium G 3000 iron rotors with Geomet anti-rust finish
• Patented Brake-in coating for faster pad bed-in
• Fully balanced and run-out tested for consistent pedal feel
• Manufacturer Part Number: S13KF2228

Fits 1990-1994 Mazda Miata (Base, LE, M Edition, SE).

Upgrade your vehicle's stopping performance and aesthetic with the EBC Brakes S12 Brake Pad and Rotor Kit. This matched set is engineered for spirited driving and modified vehicles, combining high-efficiency friction materials with precision-engineered rotors. By bundling these components into a single kit (S12KR1046), you ensure optimal compatibility while reducing installation downtime.

The included brake pads are constructed from an aramid fiber compound enhanced with ceramic granules, representing the lowest-dusting option in the EBC range. Each pad is fully shimmed, slotted, and chamfered to minimize noise and features the patented EBC Brake-in coating to ensure rapid seating immediately after installation. The rotors serve as a direct-fit OEM replacement, precision-balanced and runout-tested to eliminate pedal pulsation. They are finished with a Geomet anti-rust surface coating to maintain a clean appearance behind your wheels.

• Low Dust Compound: High-efficiency aramid and ceramic fiber pads reduce wheel cleaning frequency.
• Superior Build: Fully shimmed, slotted, and chamfered pad design for quiet, fade-free braking.
• Corrosion Resistance: Rotors feature Geomet anti-rust coating on all non-friction surfaces.
• Precision Balanced: Rotors are runout tested for smooth operation and consistent pedal feel.
• Complete Kit: Includes front/rear pads, rotors, and high-performance caliper lubricant.
• MPN: S12KR1046
• Warranty: 10,000-mile manufacturer no-hassle warranty.

Fits 2011-2015 Honda CR-Z Base and EX.

The EBC Brakes S12 kit is an engineered performance upgrade designed for spirited driving and modified vehicles. This matched set replaces worn factory components with high-efficiency brake pads and premium rotors, delivering a significant increase in stopping power while remaining the lowest-dusting option in the EBC lineup. The pads feature EBC's patented Brake-in coating to accelerate the bedding process, ensuring immediate rotor contact and optimal friction right out of the box.

To ensure a smooth, vibration-free pedal feel, every rotor in this kit is fully balanced and run-out tested. The rotors are treated with a Geomet thermic anti-rust coating, which protects the hubs and vanes from corrosion to maintain a clean appearance behind your wheels. This kit provides a complete solution for drivers seeking a premium import-style upgrade with reduced maintenance and improved thermal stability.

• High-Efficiency Pads: EBC's lowest dusting compound for cleaner wheels and consistent friction.
• Brake-in Coating: Patented surface treatment for faster pad-to-rotor bedding.
• Geomet Protection: Full anti-rust coating on rotors to resist salt and moisture corrosion.
• Precision Balanced: Rigorously tested for run-out to eliminate brake pulsation.
• Manufacturer Part Number: S12KF1833

Fits select 2015-2026 Audi A3/A3 Quattro, Kia Seltos, and Volkswagen Golf/GTI/Taos models. The EBC Brakes S11 Brake Pad and Rotor Kit is a performance-oriented maintenance solution designed to improve pedal feel and stopping consistency for daily drivers and spirited road use. This kit combines EBC’s RK-series non-slotted premium rotors with a specially formulated soft-compound brake pad to provide a moderate performance upgrade over standard OE equipment.

• Precision-Engineered Rotors: Cast from high-quality G3000 iron, these RK rotors are precision-machined, balanced, and inspected for runout to ensure smooth operation.
• Corrosion Protection: Every rotor features a Thermic black Geomet coating, providing maximum resistance against rust and corrosion on the hub and vanes.
• Improved Brake Feel: The pads utilize a softer compound that enhances pedal feedback at lower speeds and extends service life compared to standard friction materials.
• Direct Fit: This kit is a direct replacement for manufacturer components, bolting onto factory calipers and mounting points without any modifications required.
• Finished Surface: Rotors feature a cross-ground finish for faster pad bed-in and improved initial bite.
• MPN: S11KR1571