The AutoMeter 9111 Sniper V2 EFI CAN Bridge provides a direct data link between Holley Sniper V2 EFI systems and AutoMeter instrumentation. This communication harness allows you to stream critical engine parameters directly from the EFI ECU to your dashboard, streamlining the installation process and ensuring high-accuracy data delivery without the need for redundant sensors.

• Directly bridges Holley Sniper V2 EFI systems to AutoMeter gauges and displays
• Simplifies installation by utilizing existing CAN bus data for RPM, temperature, and pressure
• Reduces engine bay clutter by eliminating the need for secondary sending units
• Plug-and-play connectivity designed for secure, reliable data transmission
• Manufacturer Part Number: 9111

Protect your engine from overheating with the AutoMeter Phantom II short sweep electric water temperature gauge (MPN 7537). Excessive heat is the primary cause of engine fatigue and performance loss; this 52.4mm (2-1/16") gauge provides the real-time data needed to monitor cooling system efficiency accurately. Utilizing a race-proven air-core electric movement, it delivers precise readings while keeping hazardous fluids safely outside the cabin.

The Phantom II series is engineered for clarity, featuring a clean white face with modern white LED through-the-dial lighting for superior visibility during nighttime use. This gauge is fully compatible with 12-volt and 16-volt electrical systems, making it a reliable choice for modern street cars and dedicated race builds alike.

• Range: 100-250°F
• Size: 52.4mm (2-1/16")
• Movement: Air-Core Electric (Short Sweep)
• Lighting: White LED through-the-dial
• Voltage: 12V and 16V compatible
• MPN: 7537

Kit Includes: 1/8" NPT temperature sender, 3/8" and 1/2" NPT adapters, mounting hardware, and detailed installation instructions.

The AutoMeter Sport-Comp series mechanical boost/vacuum gauge is a legendary staple in performance builds, recognized for its precision and ruggedness. This 52mm (2-1/16 inch) gauge utilizes a patented, high-precision Bourdon tube meter movement to provide accurate, real-time pressure readings without the need for an electrical sensor or complex wiring.

Engineered for durability in harsh racing environments, the 3301 model features a 1/8-inch NPT pressure connection for a direct mechanical hookup to the intake manifold. The assembly requires no electrical power for the needle movement, ensuring reliability regardless of your vehicle's charging system state. Each gauge comes complete with a nylon line kit and the necessary fittings to simplify the installation process.

• Manufacturer Part Number: 3301
• Series: Sport-Comp
• Gauge Diameter: 52mm (2-1/16 inch)
• Range: 30 In. Hg. / 20 PSI
• Movement Type: Patented Bourdon Tube
• Connection: 1/8-inch NPT
• Included Hardware: 1/8-inch NPT fittings and nylon line kit

Fits 1967-1972 Chevrolet Trucks.

Modernize your classic vehicle's instrumentation with the AutoMeter InVision Digital Dash System (7404). This direct-fit solution replaces the factory gauge cluster in 1967-1972 Chevrolet Trucks with a vibrant, high-resolution 8.8-inch LCD display. Designed to integrate into the original dashboard, it offers a contemporary way to monitor vital engine parameters through a single, centralized interface while maintaining the iconic interior styling of your truck.

• High-Resolution Display: Features an 8.8-inch LCD screen with user-selectable display styles.
• Direct-Fit Design: Engineered specifically for the 1967-1972 Chevrolet Truck dash for a clean, professional installation.
• Complete Monitoring: Provides integrated readouts for speedometer, tachometer, fuel level, oil pressure, water temperature, and battery voltage.
• Model Specific: This kit is tailored for a seamless fit without the need for extensive dashboard modification.
• Part Number: 7404

The AutoMeter InVision 8.8in Digital Dash System (7400) provides a complete, modern instrumentation solution for custom vehicle applications. This universal system replaces outdated factory gauges with a high-resolution LCD display, offering a clean, integrated look for any dashboard. The unit features four distinct selectable screens, allowing you to monitor essential engine parameters through a single, vibrant interface.

• Replaces multiple individual gauges with a single 8.8in high-resolution LCD display
• Four customizable display styles to match your vehicle's aesthetic
• Monitors speedometer, tachometer, fuel level, oil pressure, water temperature, and voltage
• Integrated turn signal indicators and high beam notification
• Includes universal wiring harness for simplified installation
• Includes water temperature and oil pressure sensors
• Adjustable visual and audible alarms for critical low/high engine parameters
• Manufacturer Part Number: 7400

The AutoMeter Cobalt Digital 5-60 PSI Boost Gauge is engineered for high-precision monitoring in diesel and high-boost gasoline applications. Built around race-proven digital stepper motor technology, this 52mm (2-1/16") gauge provides rapid response and exceptional accuracy. The unit performs a self-calibration sequence at every power-up to ensure consistent performance over time.

This comprehensive kit includes a data-acquisition grade, solid-state stainless steel pressure transducer with a 1/8" NPT thread. Designed to withstand the vibration and temperature extremes of performance engine bays, the solid-state sensor eliminates the need for mechanical boost lines inside the cabin. The bright blue digital display allows for immediate boost pressure identification from 5 to 60 PSI.

• Series: Cobalt Digital
• Diameter: 2-1/16" (52.4mm)
• Range: 5-60 PSI
• Sensor: 1/8" NPT stainless steel solid-state pressure transducer
• Voltage: 12V and 16V system compatible
• Display: Digital LED readout
• Includes: Direct-fit wiring harness, mounting hardware, and installation instructions
• Manufacturer Part Number: 6970

Fits 2002-2006 Acura RSX Base and Type-S.

The AutoMeter 22133 Triple A-Pillar Gauge Pod offers a professional-grade mounting solution designed to integrate seamlessly with your vehicle's interior. This full-length pillar mount provides space for three 2-1/16 inch (52.4mm) gauges, positioning them within the driver's line of sight for quick monitoring of critical engine data without obstructing the forward view.

• Holds three 2-1/16 inch (52.4mm) gauges
• Full-pillar design replaces or overlays factory trim for a clean, integrated look
• Manufactured from high-quality, durable composite materials to resist warping
• Black textured finish can be painted to match your custom interior color
• Includes necessary mounting hardware for a secure installation
• Manufacturer Part Number: 22133

Fits 1994-2004 Ford Mustang models, including Base, GT, Bullitt, GTS, Mach 1, and SVT Cobra.

The AutoMeter 10004 single steering column gauge pod provides a clean, integrated solution for mounting an additional 2-1/16" (52.4mm) gauge directly in the driver's field of vision. This vehicle-specific mount is engineered to install over the top of the factory steering column shroud, maintaining a factory-style appearance while keeping critical engine data easily visible without obstructing the instrument cluster.

Molded from durable ABS composite material, this pod features a black textured finish that complements the original interior trim. For those seeking a custom look, the composite surface can be painted to match your specific interior color. This pod is a precise fit for SN95 and New Edge Mustang interiors, ensuring a secure mount that withstands daily driving.

• Specifically designed for 2-1/16" (52.4mm) gauges
• Single pod configuration for steering column mounting
• Durable ABS composite construction for long-term heat resistance
• Textured black finish is paintable for a custom match
• Direct fit over factory steering column shroud
• Manufacturer Part Number: 10004

The Stack Instruments Pedestal Gauge Mount (ST264809) offers a professional solution for mounting auxiliary gauges in a visible, easily accessible location. Designed specifically for 52mm (2-1/16 inch) gauges, this pedestal mount allows for secure installation on dashboards, steering columns, or any flat surface where a clear line of sight to your engine vitals is required.

• Fits standard 52mm (2-1/16") gauge housings
• Includes a finished black mounting cup for a clean, integrated aesthetic
• Pedestal base allows for adjustable positioning to optimize viewing angles
• Engineered to provide a stable, vibration-resistant mount for sensitive instrumentation
• Manufacturer Part Number: ST264809

Fits select 1999-2007 Ford F-250 and F-350 Super Duty trucks (XL, XLT, Lariat, King Ranch, and Harley-Davidson editions).

Protect your engine with the precision of the AutoMeter Factory Match series fuel pressure gauge. Designed specifically to coordinate with factory Ford instrumentation, this 52.4mm (2-1/16") gauge uses a digital stepper motor to provide an accurate 270-degree full sweep for immediate, reliable readings. Whether you are running a high-performance fuel-injected setup or a carbureted build, monitoring pressure is critical for avoiding lean conditions and expensive component failures.

The included solid-state 1/8" NPT pressure transducer is built to withstand high vibration and engine bay heat better than mechanical alternatives. This electronic kit includes a direct plug-in wiring harness to simplify installation and features a 0.5 - 4.5V analog output for seamless integration with data loggers or EFI engine management systems.

• Measurement Range: 0-100 PSI
• Face Diameter: 52.4mm (2-1/16")
• Full sweep digital stepper motor movement
• 0.5 - 4.5V analog output for data logging
• Includes 1/8" NPT solid state pressure transducer
• Compatible with 12V and 16V electrical systems
• Manufacturer Part Number: 8463

Monitor your engine coolant temperatures with precision using the AutoMeter Sport-Comp 52mm Short Sweep Electronic Water Temperature Gauge. This metric-scale instrument utilizes race-proven air-core electric movements to provide quick and accurate readings while keeping hazardous fluids safely outside the vehicle cabin. Designed for versatility, the 3337-M is compatible with both 12-volt and 16-volt electrical systems, making it suitable for nearly any street or race application.

• Gauge Range: 40-120° Celsius
• Size: 52mm (2-1/16 in.)
• Movement: Short Sweep Air-Core Electric
• Electrical Compatibility: 12V and 16V systems
• Included Hardware: 1/8 in. NPT temperature sender, 3/8 in. and 1/2 in. NPT adapters, and mounting hardware
• Lighting: Bulb and socket assembly with red and green covers for customized illumination
• Part Number: 3337-M

Each kit comes complete with a high-accuracy 1/8 in. NPT temperature transducer and necessary adapters for a straightforward installation on a wide variety of engine blocks and coolant crossovers.

Fits 1991-1995 Mazda RX-7 models including Base, Convertible, R1, R2, Touring, and Turbo.

This AutoMeter dual gauge pod is engineered to seamlessly integrate two 2-1/16" (52.4mm) gauges into your Mazda RX-7 interior. By positioning critical performance data within the driver's direct field of vision, it allows you to monitor engine vitals without taking your eyes off the road or track. This right-hand pod is designed for a precision fit, providing a clean, factory-like appearance while maintaining interior ergonomics.

• Fits two 2-1/16" (52.4mm) gauges
• Positions data within the driver's field of vision for safety and convenience
• High-quality construction for seamless interior integration
• Color: Black
• Mounting Location: Right-hand side
• Manufacturer Part Number: 23674

The AutoMeter 2267 adapter fitting provides a reliable solution for installing aftermarket pressure sensors into metric engine ports. This precision-machined brass adapter converts a standard M14x1.5 metric port to a 1/8" NPTF female thread, making it essential for mounting oil pressure or fuel pressure senders in various domestic and import applications.

• Manufacturer Part Number: 2267
• Material: Corrosion-resistant brass for a durable, leak-free seal
• Male Thread: M14x1.5
• Female Thread: 1/8" NPTF
• Application: Adapts 1/8" NPT sensors to metric oil galleries or filter housings

Mount your performance monitors at eye level with the AutoMeter 22132 Dual Pillar Gauge Pod. Designed specifically for the 2002-2006 Acura RSX, this mounting solution attaches to the factory A-pillar using the included hardware to provide a clean, integrated look for two 2-1/16" (52mm) gauges.

Constructed from high-quality, durable composite materials, the pod features a black textured finish that maintains a professional appearance. For those looking for a complete OEM-style integration, the composite surface is paintable to allow for a perfect color match to your vehicle's interior trim.

• Fits 2002-2006 Acura RSX (Base and Type-S)
• Holds two 2-1/16" (52mm) gauges
• Durable composite construction
• Black textured finish (paintable)
• Includes mounting hardware
• Manufacturer Part Number: 22132

Fits 1990-1996 Nissan 300ZX (2+2, Base, and Turbo) models.

This AutoMeter 20801 pillar gauge pod provides a clean, professional mounting solution for a single 2-1/16-inch (52mm) gauge. Engineered to replace or attach to the factory A-pillar, it offers a seamless integration that keeps critical engine data within your direct line of sight without obstructing your view of the road.

Constructed from high-quality, durable composite materials, this pod features a black textured finish designed to withstand the heat and UV exposure typical of dashboard environments. While it looks great as-is, the material is also paintable, allowing you to achieve a perfect color match with your Z32's interior trim.

• Precision-molded for 1990-1996 Nissan 300ZX factory pillars
• Mounts one 2-1/16" (52mm) gauge
• High-quality composite construction prevents warping or cracking
• Black textured finish can be painted to match interior
• Includes all necessary mounting hardware for a secure installation
• Manufacturer Part Number: 20801

Fits select 1992-1997 Ford F-150, F-250, F-250 HD, and F-350 models.

The AutoMeter 17303 triple pillar gauge pod provides a secure, integrated mounting solution for three 2-1/16-inch (52.4mm) gauges. Engineered for a precise fit over the factory A-pillar, this pod maintains a professional appearance while positioning critical engine data directly in the driver's line of sight. The unit is manufactured from a durable composite material with a black textured finish that can be painted to match your vehicle's specific interior color.

• Holds three 2-1/16-inch (52.4mm) gauges
• Molded from high-quality composite to withstand heat and UV exposure
• Black textured finish; paint-to-match compatible
• Mounts over factory A-pillar using included hardware
• Manufacturer Part Number: 17303

The Autometer WC-7028 Tower of Power is a professional-grade wheeled battery charger engineered for the rigors of a busy shop environment. Its tall, slender profile allows it to maneuver easily between vehicle lifts and tight workspaces, placing the analog control interface at an ergonomic height for easy adjustment.

Internally, the Tower of Power is built for maximum electrical efficiency and uninterrupted current flow. It features an ultra heavy-duty transformer with 100% copper windings and utilizes 2-gauge solid copper wiring. This construction, paired with professional-grade, high-tension clamps, ensures optimal conductivity and a significantly extended service life compared to standard consumer chargers.

• Multiple output rates: 70A, 30A, and 4A charging modes
• 280A engine start/boost capacity for heavy-duty applications
• 100% copper windings and 2-gauge copper output leads
• Rugged rubber tires designed to easily roll over shop air hoses, debris, and gravel
• Precise, easy-to-read analog gauges for accurate testing and monitoring
• Manufacturer Part Number: WC-7028

Fits 1999-2001 Ford F-250 and F-350 Super Duty models (XL, XLT, and Lariat) equipped with a 40/20/40 split bench seat.

The AutoMeter P10190 provides a functional interior upgrade for early Ford Super Duty trucks, addressing the common issue of inadequate factory beverage storage. This unit securely holds two drinks within easy reach, featuring deep wells and integrated mug handle cutouts to accommodate various container sizes while preventing spills during transit. In addition to beverage storage, the unit features a dedicated slot for modern cell phones, keeping your devices secure on the road.

• Specifically designed for trucks with 40/20/40 split bench seating
• Dual deep-well beverage holders with mug handle cutouts
• Integrated cell phone storage slot
• Replaces substandard factory equipment to prevent messy spills
• Manufacturer Part Number: P10190

Fits 1994-1997 Dodge Ram 1500, 2500, and 3500. This AutoMeter P10150 interior accessory replaces the substandard factory equipment to provide a more secure and accessible storage solution for your beverages and mobile devices.

Designed with deep-well reservoirs, this unit accommodates two drinks simultaneously and features specific cutouts to clear mug handles. The center storage compartment is sized to keep cell phones or other small items within reach and secure during driving. This unit is an ideal solution for truck owners looking to fix the common issue of loose or spilling beverages caused by the OE dash-mounted cup holders.

• Manufacturer Part Number: P10150
• Capacity: Holds two beverages plus a dedicated phone storage slot
• Design: Deep wells with mug handle relief for increased stability
• Installation: Replaces or supplements factory storage options
• Fitment: 1994-1997 Dodge Ram 1500/2500/3500 pickups

The Autometer E-POWER 800 is a versatile 4-in-1 emergency power solution designed for vehicle recovery and portable charging. This compact 12V power pack delivers 800A of peak current, capable of jump-starting a vehicle up to twenty times on a single charge. It eliminates the need for jumper cables or roadside assistance, providing independence in emergency situations.

Constructed to serve as more than just a starter, the EP-800 functions as a high-capacity power bank for mobile devices, a dedicated laptop power source, and an integrated LED flashlight for low-light repairs. Whether you are off the grid or in a parking lot, this multi-function kit ensures your essential electronics and vehicle remain operational.

• Manufacturer Part Number: EP-800
• Peak Current: 800A
• System Voltage: 12V
• Capacity: 2220 mAh
• 4-in-1 Functionality: Jump starter, mobile power bank, laptop battery, and LED flashlight
• Performance: Capable of up to 20 jump starts per full charge

The AutoMeter 990414 Standard Right Angle Speedometer Cable Adapter is an essential solution for tight installations where a standard cable radius bend is impossible due to space constraints. This heavy-duty adapter allows for a precise 90-degree transition, preventing cable binding and ensuring smooth operation of mechanical speedometers.

• Construction: Lightweight aluminum housing with a durable black powder coat finish for corrosion resistance.
• Fitment: 5/8"-18 Male to Female threads for seamless integration with standard mechanical speedometer cables.
• Specifications: Features a .104" square drive and a 1:1 ratio to maintain accurate speed readings without calibration changes.
• Dimensions: Compact 1.16" x 2.15" x 2.5" profile.
• Weight: 10 oz.
• Part Number: 990414

Restore the accuracy of your instrumentation with the AutoMeter 990344 ES series replacement temperature sensor. This sender is specifically engineered for use with AutoMeter Marine short sweep electric air core gauges, providing the precise resistance signal required for critical engine monitoring.

This sensor features a primary 1/8" NPTF male thread and comes with the necessary hardware to adapt to larger ports, ensuring a leak-free seal and reliable thermal conductivity. Whether you are performing a fresh installation or replacing a failed sender, this kit provides the components needed for a professional finish.

• Manufacturer Part Number: 990344
• Thread Size: 1/8" NPTF Male
• Gauge Compatibility: AutoMeter Marine Short Sweep Electric Air Core
• Included Adapters: 3/8" NPT and 1/2" NPT bushings

Ensure precise monitoring of your engine's lubrication system with the AutoMeter 990342 oil pressure sensor. This replacement or accessory sensor is specifically engineered for use with AutoMeter short sweep electric oil pressure gauges. It provides an accurate signal for readings across the 0-100 PSI range, allowing you to detect fluctuations before they lead to engine damage.

• Manufacturer Part Number: 990342
• Pressure Range: 0-100 PSI
• Fitting Size: 1/8 in. NPT male threads
• Compatibility: Designed for AutoMeter short sweep electric gauges
• Installation: Threads directly into the factory oil galley or an aftermarket sandwich plate

The AutoMeter 9117 Tach Adapter is a specialized signal converter designed for vehicles equipped with modern distributorless ignition systems (DIS) or coil-per-cylinder setups. This module installs into the ignition system power supply to sense current and generate a conventional 12V square wave signal output. This allows for the seamless integration of AutoMeter tachometers and aftermarket RPM-activated devices in vehicles where a traditional tach signal is not available.

Built to withstand harsh engine bay environments, the module features a fully potted, environmentally sealed housing that is both weatherproof and vibration-resistant. It is a critical component for late-model engine swaps and high-performance builds requiring accurate RPM data from electronic ignition systems.

• Output Signal: 12V square wave
• Environmental Protection: Fully potted and weatherproof for underhood mounting
• Module Dimensions: 1.5 in. x 3.5 in. x 2 in.
• Wire Lead Lengths: Gray (signal out) 52 in.; Black (ground) 24 in.; Red & Red/Green (ignition power) 24 in.
• Manufacturer Part Number: 9117

The AutoMeter 9109 Fuel Bridge is a specialized signal adapter designed to solve compatibility issues between mismatched fuel level gauges and sending units. This module wires directly between the gauge and the sending unit, allowing you to use any AutoMeter fuel level gauge with virtually any stock or aftermarket sending unit, regardless of their ohm ranges.

Calibration is simplified through a triple push-button interface and an integrated LED display, which enables precise mapping of the sender's signal to the gauge's requirements. The compact housing allows for versatile mounting behind the dashboard or in the engine bay. Additionally, the unit features a programmable low fuel warning output that triggers at 10% capacity and resets at 15%, suitable for driving an external warning LED or a relay.

• Manufacturer Part Number: 9109
• Function: Interfaces any AutoMeter fuel gauge with any ohm-range sending unit
• Controls: Triple push-button setup with digital LED display for calibration
• Low Fuel Warning: On at 10%, Off at 15% (outputs for LED or relay)
• Dimensions: 3-1/8" W x 2-1/2" T x 3/4" D

Monitor your fuel levels with precision using the AutoMeter Jeep Series 52mm (2-1/16 in.) short sweep electric fuel level gauge. Designed to match the classic aesthetic of Jeep instrumentation, this gauge is calibrated for the common 73 ohms empty to 8-12 ohms full resistance range found in most pre-1989 Ford (including pre-1987 Mustang) and Chrysler factory sending units.

• Slosh Dampening: Features a patented air-core meter movement with extra dampening to provide steady, accurate readings even in non-baffled fuel tanks during off-road or spirited driving.
• Electrical Compatibility: 12 and 16-volt compatible, making it suitable for nearly any street or race car electrical system.
• Complete Kit: Includes a bulb and socket assembly, red and green bulb covers for custom lighting, and all necessary mounting hardware.
• Reliable Performance: Race-proven electric instruments ensure quick response and long-term durability in demanding environments.

Specifications:
Manufacturer Part Number: 880428
Diameter: 52mm (2-1/16 in.)
Resistance Range: 73 Ohms Empty / 8-12 Ohms Full
Movement: Air-Core Electric Short Sweep

Fits select 2010-2017 Dodge and Ram 1500, 2500, and 3500 trucks across various trims including Laramie, SLT, and Tradesman.

Protect your engine by monitoring critical fuel delivery with the AutoMeter Factory Match series fuel pressure gauge. Designed specifically to blend seamlessly with the interior aesthetics of 4th Generation Dodge Ram trucks, this 52.4mm (2-1/16 in) gauge features a digital stepper motor for professional-grade accuracy. Whether your vehicle is fuel-injected or carbureted, the included 1/8-inch NPT solid-state pressure transducer delivers precise measurements with superior resistance to high-vibration and high-heat environments.

This electronic gauge includes a direct plug-in wiring harness for a simplified installation process. For enthusiasts looking to track performance over time, the unit provides a 0.5 - 4.5V analog output, making it fully compatible with most data logging systems and ECU interfaces.

• Manufacturer Part Number: 8561
• Range: 0-30 PSI
• Size: 52.4mm (2-1/16 in)
• Movement: Full Sweep Digital Stepper Motor
• Sensor: 1/8" NPT Solid State Pressure Transducer
• Output: 0.5 - 4.5V analog output for data logging
• Electrical Compatibility: 12V and 16V systems
• Included Hardware: Wiring harness and mounting hardware

Fits select 2003-2009 Dodge Ram 2500 and 3500 (Laramie, SLT, Sport, ST, SXT, TRX4).

Monitoring exhaust gas temperature (EGT) is critical for preventing catastrophic engine damage in high-output diesel and forced induction applications. The AutoMeter Factory Match series EGT gauge uses a race-proven digital stepper motor to provide precise measurement with a self-calibration sequence during every power-up. Designed to integrate seamlessly with your truck's interior, this gauge features high-definition LED backlighting for effortless viewing in any lighting condition.

The included fast-acting Type K thermocouple ensures maximum accuracy and minimum response time, allowing you to react quickly to temperature spikes. The 8544 kit is compatible with 12-volt and 16-volt electrical systems, making it suitable for both street and race applications.

• Range: 0-1600°F
• Diameter: 2-1/16in (52.4mm)
• Movement: Digital Stepper Motor with Full Sweep
• Backlighting: High-Definition LED
• Voltage: 12V and 16V compatible
• Includes: Type-K Thermocouple, wiring harness, thermocouple mounting kit, and mounting hardware
• Manufacturer Part Number: 8544

Fits select 2010-2017 Dodge Ram 1500, 2500, and 3500 trucks.

Designed to integrate seamlessly with the factory interior of Gen 4 trucks, the AutoMeter Gen 4 Dodge Factory Match mechanical boost gauge (MPN 8509) provides precise monitoring for high-boost applications. This gauge features an ultra-precise bourdon tube meter movement, ensuring mechanical accuracy and long-term durability without the need for an electrical pressure sensor. The direct-mount 1/8" NPT pressure connection simplifies the installation process for gasoline or diesel forced-induction engines.

• Manufacturer Part Number: 8509
• Gauge Diameter: 52.4mm (2-1/16")
• Range: 0-100 PSI
• Movement Type: Mechanical bourdon tube
• Installation Kit: Includes 1/8" nylon line and mounting hardware
• Fittings Included: 1/8" NPT compression fittings and 1/4" NPT adapter

Fits 1999-2007 Ford F-250 and F-350 Super Duty trucks.

Maintaining proper transmission fluid temperature is the single most important factor for the longevity of your automatic transmission. The AutoMeter Factory Match series gauge (MPN 8457) provides the laboratory-grade accuracy needed for heavy towing or high-performance applications, styled specifically to match the OEM interior of your Ford Super Duty. This 52.4mm full-sweep gauge utilizes a high-precision digital stepper motor to provide real-time fluid temperatures from 100-260°F.

Every gauge undergoes a self-calibration sequence upon power-up to ensure maximum precision. The kit includes AutoMeter’s advanced 1/8" NPT temperature transducer and a direct plug-in wiring harness for a clean, efficient installation process.

• Brand: AutoMeter
• Series: Factory Match
• MPN: 8457
• Diameter: 52.4mm (2-1/16")
• Range: 100-260°F
• Display: Full-sweep electronic digital stepper motor
• Sensor: 1/8" NPT temperature transducer included
• Harness: Direct plug-in wiring harness included