Fits 1983-1987 Toyota Corolla AE86.

The Whiteline Essential Vehicle Kit is a comprehensive suspension refresh solution designed to restore the handling precision and steering feedback of the legendary AE86 chassis. Over time, factory rubber bushings perish, crack, and soften, leading to suspension geometry deflection and a vague driving feel. This kit replaces those critical wear items with Whiteline's proprietary synthetic elastomer bushings, engineered to maintain alignment settings under high cornering loads without the harshness of solid mounts.

• Replaces primary suspension pivot points to eliminate unwanted movement and slop
• Synthetic elastomer construction provides superior durability and resistance to chemicals and weathering
• Improves chassis rigidity and steering response for both street and performance driving
• Designed as a direct-fit replacement for aged or failed OE rubber bushings

Fits select 2016-2025 Mazda MX-5 Miata and 2017-2020 Fiat 124 Spider.

The Whiteline Front Essential Vehicle Bushing Kit is engineered to eliminate excessive suspension deflection and "Activate More Grip" for your chassis. By replacing soft factory rubber with high-quality performance bushings, this kit ensures more consistent alignment geometry and improved handling stability. These components are designed to withstand the rigors of performance driving, resisting wear while providing a smoother, more controlled ride through reduced noise and vibration.

This comprehensive front-end kit provides the essential components needed to restore steering precision and maintain handling performance under high cornering loads. The engineered fitment supports consistent stability, making it an ideal upgrade for both daily driving and spirited track use.

• Replaces worn OE bushings to improve steering feedback and response
• Resists wear and extends service life compared to standard rubber
• Reduces noise, vibration, and harshness (NVH) for a refined ride
• Includes: 12 Shell Bushings, 16 Tubes, 4 Bushings, 4 Bearings

Fits 1990-2005 Mazda Miata (NA/NB Chassis).

The Whiteline Vehicle Essentials Kit provides a comprehensive suspension and drivetrain refresh by replacing compliant factory rubber with high-performance synthetic elastomer. This comprehensive kit—incorporating components WEK098, WEK099, and KDT954—targets the primary deflection points in the Miata chassis: the front and rear control arms and the differential housing.

By upgrading to these polyurethane bushings, you eliminate the vague steering and unwanted geometry changes caused by aged OE components. The differential bushings are specifically engineered to maintain critical pinion angles, resulting in more precise gear shifts and more efficient power transfer by minimizing initial torque loss during hard acceleration.

• Proprietary synthetic elastomer formulation offers superior grip and handling with resistance to oil, grease, and ozone weathering.
• Maintains suspension alignment and improves chassis feedback under high cornering loads.
• Direct OE replacement design installs into factory mounting points for a precise fit.
• Includes specialized assembly grease to ensure quiet operation and long-term bushing life.
• Comprehensive kit includes all necessary bushings for front and rear control arms plus the differential.

• Brand: Whiteline
• Part Numbers Included: WEK098, WEK099, KDT954
• Material: Synthetic Elastomer (Polyurethane)
• Warranty: Limited Lifetime

Fits 2014-2017 Chevrolet SS (Base).

The Whiteline BHK012 Sway Bar Kit is a complete handling solution designed to reduce body roll, increase lateral grip, and improve the cornering balance of your chassis. By replacing the soft factory bars with high-stiffness units, this kit provides a flatter cornering attitude and more precise steering response. The front bar features a 4-point adjustment system, allowing you to fine-tune the handling balance from mild understeer to neutral rotation.

This kit utilizes Whiteline's advanced synthetic elastomer mounting bushings, which feature internal bore knurling and grease retention lips for consistent lubrication and quiet operation. The included heavy-duty sway bar links offer up to 25mm of on-car length adjustment, allowing you to eliminate sway bar preload and maintain proper suspension geometry after lowering the vehicle.

• Front Sway Bar: 30mm diameter, 4-point adjustable design.
• Rear Sway Bar: 27mm diameter, fixed rate.
• Construction: High-quality spring steel with protective coating.
• Bushing Material: Low-friction synthetic elastomer for immediate response.
• Adjustable End Links: Provides up to 25mm of center-to-center adjustment to eliminate preload.
• Part Number: BHK012
• Included Hardware: Front and rear sway bars, mounting bushings, adjustable end links, and installation accessories.

Fits 1996-2000 Honda Civic models including CX, DX, EX, GX, HX, LX, Si, and Value Package.

The Whiteline BHK009 Front and Rear Sway Bar Kit is a complete handling solution designed to reduce body roll and increase cornering grip. This kit replaces thin factory bars with a heavy-duty 27mm fixed front sway bar and a 22mm 2-point adjustable rear sway bar. By increasing the roll stiffness of your Honda Civic, this kit provides a more stable, predictable platform during high-speed cornering and rapid directional changes without compromising ride quality.

The 2-point adjustable rear bar allows you to fine-tune the vehicle's oversteer/understeer characteristics, ensuring the chassis is balanced for your specific driving style. Engineered for long-term durability and performance, this kit includes everything needed for a complete installation to get your Civic handling with precision.

• Part Number: BHK009
• Front Sway Bar: 27mm fixed diameter
• Rear Sway Bar: 22mm 2-point adjustable diameter
• Reduces body roll for flatter cornering and improved tire contact
• Includes rear sway bar links and all necessary mounting hardware
• High-quality bushings and hardware for a direct, bolt-on installation

Fits select 2018-2026 Kia Stinger (including GT, GT-Line, GT1, and GT2) and Genesis G70 models.

The Whiteline Front and Rear Sway Bar Kit (BKK001) is engineered to reduce body roll and improve the handling dynamics of your vehicle by increasing cornering stiffness. This packaged solution is designed to 'Activate More Grip,' providing a more balanced and precise driving experience during spirited cornering and high-speed maneuvers.

This kit features heavy-duty front and rear sway bars paired with Whiteline's advanced synthetic elastomer mounts. These bushings utilize internal bore knurling and grease retention lips to ensure optimum lubrication and quiet, long-lasting performance. By replacing worn factory components with this tuned sway bar set, you achieve greater stability and flatter cornering without sacrificing ride quality.

• Reduces body roll and improves steering response
• Synthetic elastomer bushings for durability and precise fitment
• Internal bore knurling and grease retention lips for superior lubrication
• Includes necessary mounting hardware and accessories
• Manufacturer Part Number: BKK001

Fits select 2015-2020 Audi A3 Quattro, S3, RS3 and Volkswagen Golf R, Alltrack, and SportWagen.

The Whiteline BWK019 Sway Bar Kit is a comprehensive handling solution designed to reduce body roll and neutralize understeer. By increasing the chassis's torsional stiffness, this kit ensures your tires stay flatter through high-lateral-load cornering, maximizing the contact patch. The system features a 26mm 2-point adjustable front bar and a 24mm 2-point adjustable rear bar, allowing drivers to fine-tune the vehicle's balance for specific track conditions or street preferences.

This kit includes heavy-duty adjustable sway bar links that eliminate preload during installation and allow for up to 25mm of center-to-center length adjustment. Forged ends provide maximum strength at the link mounting points, while the included DIY lateral locks prevent the bar from shifting sideways under heavy load. The system utilizes Whiteline's synthetic elastomer bushings with internal bore knurling and PTFE lining for a low coefficient of friction, eliminating the need for periodic lubrication and preventing the squeaks associated with traditional poly bushings.

• Front Sway Bar: 26mm (2-point adjustable)
• Rear Sway Bar: 24mm (2-point adjustable)
• Adjustable Sway Bar Links: Up to 25mm length adjustment
• Bushings: PTFE-lined synthetic elastomer with knurled bores
• Finish: Corrosion-resistant powder coating and protective plating
• Includes: Lateral locks, mounting hardware, and installation guide
• Manufacturer Part Number: BWK019

Fits select 2009-2020 Hyundai Genesis, Genesis Coupe, and Genesis G80 (2.0T / 3.8 / 5.0).

The Whiteline BHK016M sway bar kit is a comprehensive suspension solution designed to reduce body roll and improve chassis balance. By replacing restrictive factory bars with larger, adjustable units, this kit allows you to fine-tune your vehicle's handling characteristics for sharper turn-in and increased cornering stability. The multi-point adjustment allows for precise tuning to suit specific driving conditions or preferences.

• Front Sway Bar: 30mm 2-point adjustable
• Rear Sway Bar: 26mm 2-point adjustable
• Adjustable Sway Bar Links: Heavy-duty steel ball joints with up to 25mm of on-car length adjustment to eliminate preload
• Bushings: Synthetic elastomer with internal bore knurling and grease retention lips for consistent lubrication
• Finish: Protective E-Coat and powder coating for maximum corrosion resistance and durability
• Forged Ends: Provides maximum strength at critical sway bar link mounting points
• Lateral Locks: DIY locks prevent sideways movement of the bar under high cornering loads
• Included Hardware: High-quality mounting accessories and molybdenum disulphide (LM) grease
• Manufacturer Part Number: BHK016M

Each component is engineered to eliminate the flex associated with original equipment. The synthetic elastomer bushings are resistant to oil, grease, and weathering, ensuring long-term performance without the degradation common in rubber components.

Fits 1985-1995 Toyota MR2 (Base, GT, Super Charged, and Turbo).

The Whiteline BTK003 sway bar kit is a comprehensive handling upgrade designed to reduce body roll and increase mechanical grip. By linking the left and right wheels, these sway bars distribute cornering loads more effectively across the chassis, keeping the tires flatter on the pavement for more predictable turn-in and cornering stability.

This kit allows for precise chassis tuning through multiple adjustment points, enabling you to dial in the desired balance between understeer and oversteer. The components are engineered for long-term durability and consistent performance under spirited driving conditions.

• Manufacturer Part Number: BTK003
• Front Sway Bar: 20mm diameter, 3-point adjustable
• Rear Sway Bar: 20mm diameter, 2-point adjustable
• Includes high-quality mounting accessories for a complete installation
• Reduces body roll and improves weight transfer characteristics

Fits 2005-2021 Nissan Frontier, 2005-2015 Nissan Xterra, and 2009-2012 Suzuki Equator.

The Whiteline Rear Essential Vehicle Kit is an all-in-one solution designed to restore and reinforce your truck's rear suspension. Over time, high mileage and heavy load-carrying cause factory rubber bushings to compress and tear, leading to wheel hop and inconsistent handling. This kit replaces the front and rear leaf spring eye bushings as well as the shackle bushings with Whiteline’s signature synthetic elastomer components.

Engineered for 4WD applications, towing, and heavy-duty use, these black bushings offer superior abrasion resistance and higher load-bearing capacity than OE rubber. The internal grease reservoirs ensure the supplied molybdenum disulphide grease stays where it is needed for consistent, self-lubricating operation and quiet performance.

• Complete service kit for leaf spring eyes (front/rear) and shackle bushings
• Advanced synthetic elastomer formulation resists oil, grease, and ozone
• Internal grease reservoirs for long-term friction management
• Protective plating on metal components resists corrosion in harsh environments
• Includes extreme pressure molybdenum disulphide (LM) grease
• Includes detailed installation guide for a straightforward DIY install

Fits select 2019-2020 Hyundai Elantra, Veloster, and Veloster N models.

Improve your vehicle's handling and cornering performance with the Whiteline Sway Bar Vehicle Kit. Designed to reduce body roll and increase lateral stiffness, this kit ensures a more stable and predictable chassis during spirited driving or track use. By spreading cornering loads more evenly across the tires, the sway bars help maintain a larger contact patch, significantly sharpening steering response and reducing understeer.

• Engineered to reduce body roll and improve overall chassis balance
• Manufactured from high-quality materials for long-lasting durability
• Includes premium synthetic elastomer bushings for quiet, reliable operation
• Direct fitment to factory mounting points for a straightforward installation

Fits select 2018-2026 Genesis G70 and Kia Stinger (Base, GT, GT-Line, GT1, GT2, Sport, and Prestige).

The Whiteline BKK001 sway bar kit is a complete handling solution designed to reduce body roll, increase roll stiffness, and improve steering response. By increasing torsional resistance, these larger diameter bars keep the vehicle flatter through corners, providing a more balanced and predictable driving experience. This comprehensive kit includes both front and rear adjustable sway bars, allowing for fine-tuning of vehicle characteristics to suit specific driving conditions or preferences.

To ensure maximum efficiency, the kit features high-strength adjustable end links that eliminate sway bar preload and allow for precise on-car length adjustment. The included synthetic elastomer bushings utilize PTFE lining and internal bore knurling for superior grease retention and friction management, eliminating the need for frequent lubrication. Every component is built for durability, featuring forged ends, heavy-duty steel ball joints, and a protective powder-coated finish for long-term corrosion resistance.

• Multi-Point Adjustment: Allows for precise tuning of handling balance.
• Adjustable End Links: High-strength links with heavy-duty ball joints eliminate preload and improve turn-in response.
• Lateral Locks: DIY lateral locks prevent the sway bar from shifting sideways under heavy cornering loads.
• Advanced Bushing Technology: PTFE-lined synthetic elastomer bushings with grease retention lips for maintenance-free operation.
• Corrosion Protection: Tough powder coating and anodized alloy materials resist ozone, weathering, and road debris.
• Complete Kit (BKK001): Includes front sway bar, rear sway bar, adjustable end links, bushings, mounting hardware, and installation guide.

Fits select 1991-2000 BMW 3 Series models, including 318i/is/ti, 323i/Ci/is, 325i/is/iX, 328i/Ci/is, and M3.

The Whiteline BBK001 Sway Bar Kit is a comprehensive handling upgrade designed to significantly reduce body roll and sharpen steering response. By increasing the roll stiffness of the chassis, this kit ensures flatter cornering and improved tire contact patches during high-lateral load maneuvers. The adjustable design allows drivers to fine-tune the vehicle's handling balance to neutralize understeer or oversteer based on driving conditions.

• Front Sway Bar: 27mm 3-point adjustable bar manufactured from high-grade steel.
• Rear Sway Bar: 22mm 2-point adjustable bar for precise rear-end tuning.
• Advanced Bushings: Synthetic elastomer bushings featuring internal bore knurling and grease retention lips for superior lubrication and service life.
• Reinforced Links: Includes front and rear sway bar links to eliminate the flex associated with aged OE components.
• Lateral Locks: DIY lateral locks are provided to prevent the sway bar from shifting sideways during aggressive cornering.
• Corrosion Resistance: Metal components feature a combination of protective plating and powder coating to withstand harsh environments.
• Installation Hardware: Supplied with mounting accessories, extreme pressure molybdenum disulphide (LM) grease, and a detailed install guide.

Fits 2008-2009 Pontiac G8 and 2014-2017 Chevrolet SS.

The Whiteline BHK008 sway bar kit is a comprehensive handling solution engineered to reduce body roll and increase cornering grip. This kit replaces the flexible factory components with high-stiffness adjustable bars, allowing you to fine-tune your vehicle's chassis balance for better turn-in and flatter cornering. By eliminating the flex associated with original equipment links and bushings, this kit provides a more responsive and predictable driving experience during high-speed maneuvers and lane changes.

The included sway bars feature forged ends for maximum strength at the link mounting points, while the synthetic elastomer bushings utilize internal bore knurling and grease retention lips for consistent lubrication. The kit is finished with protective plating and powder coating for long-term corrosion resistance in harsh environments. DIY lateral locks are provided to prevent the bars from shifting sideways under heavy lateral loads.

• Manufacturer Part Number: BHK008
• Front Sway Bar: 30mm 4-point adjustable
• Rear Sway Bar: 22mm 3-point adjustable
• Sway Bar Links: Heavy-duty steel ball joint ends with up to 25mm on-car length adjustment
• Bushings: Oil, grease, and ozone-resistant synthetic elastomer
• Included Hardware: DIY lateral locks, mounting accessories, and molybdenum disulphide grease
• Installation: Direct bolt-on with included detailed guide

Fits select 2005-2013 BMW 1 Series and 3 Series models, including 128i, 135i, 325i, 328i, 330i, 335i, and 1 Series M.

The Whiteline BBK004 Sway Bar Kit is a comprehensive handling solution designed to reduce body roll and increase mechanical grip. By effectively distributing cornering loads across the chassis, this kit provides flatter cornering and more predictable handling during spirited driving or track use. The increased stiffness from the upgraded bar diameters helps neutralize understeer and improves steering response without sacrificing daily ride quality.

• Part Number: BBK004
• Front Sway Bar Diameter: 27mm
• Rear Sway Bar Diameter: 20mm
• Heavy-duty sway bar links included for precise load transfer
• High-quality mounting hardware and bushings included for a complete installation
• Durable powder-coated finish for long-term corrosion resistance

This kit replaces the factory sway bars and links, utilizing existing mounting points for a direct-fit installation. It is an ideal upgrade for E82/E88 and E90/E92/E93 chassis owners looking to stabilize the car's platform under high lateral G-forces.

Fits 2015-2023 Ford Mustang models, including EcoBoost, GT, V6, Bullitt, Mach 1, and Shelby GT350/GT500.

These Whiteline front tension link lower control arms are complete replacements engineered to optimize front suspension geometry on the S550 platform. By utilizing offset bushings, this kit increases static caster to both front wheels, significantly sharpening initial turn-in response and enhancing mid-corner grip under load.

The specialized low-compliance bushings are designed to minimize caster wind-back, maintaining tighter tolerances between your static alignment and dynamic settings during aggressive driving. This reduction in bushing deflection ensures more consistent alignment angles, providing a predictable feel and improved traction when powering out of corners. This is a direct-fit solution for drivers looking to eliminate the vague steering feel associated with soft factory rubber bushings.

• Increases static caster for improved steering weight and turn-in
• Low-compliance bushings reduce dynamic alignment changes
• Offset design maximizes front-end grip and traction
• Direct replacement for OE front tension links
• Manufacturer Part Number: KTA416

Fits select 2013-2026 Subaru BRZ, Scion FR-S, Toyota 86, and Toyota GR86.

The Whiteline KCA434 Anti-Dive/Caster Kit is engineered to increase positive caster and optimize front anti-dive geometry. By replacing the factory control arm lower inner front bushings with low-compliance synthetic elastomer, this kit minimizes dynamic caster loss during heavy braking and aggressive cornering. The result is sharper turn-in response, increased directional stability, and more consistent alignment angles for a maximized tire contact patch.

Built for durability in high-load applications, these bushings feature a specially bonded design and internal grease reservoirs for self-lubrication. The metal components are protected by a combination of powder coating, protective plating, and anodized finishes to resist corrosion and wear in harsh environmental conditions.

• Optimized Geometry: Increases caster and reduces front-end lift and dive under load.
• Synthetic Elastomer: Proprietary formulation resistant to oil, grease, ozone, and weathering.
• Constant Lubrication: Internal grease reservoirs and supplied molybdenum disulphide (LM) grease manage friction and extend component life.
• Corrosion Resistance: Protective plating and anodized alloy materials ensure longevity against road debris and chemicals.
• Manufacturer Part Number: KCA434

Vehicle Fitment

Fits select 1992-2001 Honda Civic, Honda Civic del Sol, and Acura Integra. This Whiteline 22mm 2-point adjustable rear sway bar is engineered to "Activate More Grip" by significantly reducing body roll and spreading lateral loads more evenly across all four tires. By increasing the vehicle’s roll stiffness, this bar improves cornering performance, turn-in response, and safety without compromising daily ride quality.

• 22mm heavy-duty solid spring steel construction for maximum torsional stiffness.
• 2-point adjustability allows for fine-tuning of handling characteristics to suit your driving style.
• Includes premium synthetic elastomer bushings with internal bore knurling and grease retention lips for superior lubrication.
• PTFE-lined bushings eliminate the need for periodic re-greasing and prevent squeaking.
• Protective powder coating and plating resist corrosion and harsh environmental conditions.
• DIY lateral locks included to prevent the sway bar from shifting under heavy cornering loads.
• Manufacturer Part Number: BHR36XZ

Fits 1976-1979 Jeep CJ5 and CJ7.

Restore chassis stability and correct body alignment with the Whiteline W93540 Body Mount Bushing Set. Over years of use, factory rubber mounts deteriorate due to exposure and mechanical stress, leading to body sag and increased NVH (noise, vibration, and harshness). These Whiteline bushings are engineered from a high-grade synthetic elastomer that offers superior abrasion resistance and high load-bearing capacity, making them ideal for 4WD applications, towing, and off-road use.

• Corrosion Resistance: All metal components feature protective plating that acts as a hard skin, outperforming conventional paint in harsh environments.
• Advanced Formulation: Resistant to oil, grease, ozone, and weathering for long-term service life.
• High Load Design: Specially bonded construction provides the tensile strength required for heavy-duty 4WD use while maintaining necessary flexibility.
• Direct Replacement: Designed for a straightforward installation to factory mounting points; includes a detailed installation guide.
• MPN: W93540

Fits 1995-2000 Toyota Tacoma Base, Limited, Pre Runner, and SR5.

Original equipment (OE) steering rack bushings are prone to degradation from engine bay contaminants like oil and grease, as well as the increased loading caused by wider wheels and aggressive alignment geometry. This Whiteline Steering Rack Bushing Kit (W13398) is engineered to replace worn factory rubber with a more durable synthetic elastomer, restoring steering precision and providing significantly better feedback through the wheel.

• Enhanced Precision: Engineered to eliminate steering rack play and improve overall vehicle handling and feedback.
• Advanced Material: Formulated to resist oil, grease, ozone, and environmental weathering for a longer service life than rubber.
• Corrosion Protection: Metal components feature protective plating to withstand harsh undercar conditions and resist rust.
• Installer Friendly: Designed to be a direct replacement for OE bushings, reducing the need for specialized shop tools during installation.
• Manufacturer Part Number: W13398

Fits select 2005-2018 Audi and Volkswagen models, including A3, Q3, TT, CC, Eos, Golf, GTI, Jetta, Passat, and Tiguan (1.8T / 2.0T).

Uneven tire wear, unbalanced braking, and unpredictable rear-end handling are often symptoms of failed factory control arm bushings. The Whiteline Plus Rear Control Arm Upper Inner Bushing Kit (W63549) replaces these worn components with high-durability synthetic elastomer bushings designed to restore alignment stability and cornering predictability.

Engineered for longevity, these bushings feature a proprietary synthetic elastomer formulation that resists damage from oil, grease, ozone, and weathering. To ensure smooth operation and minimal friction, the bushings are designed with internal grease reservoirs and are supplied with molybdenum disulphide (LM) based grease for extended service life.

• Optimized Performance: Restores factory handling characteristics and rear-end steering response.
• Advanced Materials: Synthetic elastomer resists chemical degradation and environmental weathering better than OE rubber.
• Corrosion Protection: Metal components feature protective plating and powder coating to withstand harsh road conditions.
• Friction Management: Internal grease reservoirs provide continuous self-lubrication for quiet operation.
• Included Hardware: Supplied with extreme pressure molybdenum disulphide (LM) based grease.
• Manufacturer Part Number: W63549

Fits 1968-1972 Chevrolet Chevelle (Malibu, Nomad, 300, Concours, Greenbrier, and Base models).

Over time, factory rubber body mounts deteriorate, leading to excessive body movement, poor panel alignment, and a disconnected chassis feel. The Whiteline Body Mount Bushing Set (W93545) is engineered to replace these perished OE components with high-durability synthetic elastomer bushings that restore chassis rigidity and maintain precise body-to-frame alignment.

This kit improves handling response and reduces the risk of alignment shifts during hard cornering or acceleration. To ensure a quiet, long-lasting installation, Whiteline includes extreme pressure molybdenum disulphide (LM) based grease to reduce friction and eliminate potential squeaks.

• Direct replacement for worn-out original equipment body mounts
• Reduces body-to-frame movement for enhanced chassis stability
• Resistant to oils, road salt, and environmental debris
• Includes molybdenum disulphide (LM) based grease for extended service life
• Manufacturer Part Number: W93545

Fits select 2017-2026 Tesla Model 3 and Model Y equipped with a Whiteline performance front sway bar.

Maintain the performance of your Whiteline 30mm front sway bar (BTF101Z) with the KSK133-30 sway bar service kit. These mount bushings are manufactured using the latest synthetic elastomer technology, engineered to synchronize your suspension system for improved handling, better ride quality, and extended service life. The internal diameter features a specialized knurled design, specifically created to retain grease and ensure quiet, low-maintenance operation even under high-load cornering.

• Specifically designed to fit the Whiteline 30mm BTF101Z performance sway bar
• High-grade synthetic elastomer material resists environmental degradation
• Knurled internal diameter (ID) maximizes grease retention and minimizes noise
• Restores handling precision and reduces suspension play
• Kit contains: (2) 30mm replacement bushings
• Manufacturer Part Number: KSK133-30

Fits 2014-2026 Subaru Forester, Legacy, Outback, WRX, and WRX STI.

Eliminate drivetrain slop and sharpen vehicle response with the Whiteline Rear Differential Mount In Cradle Bushing Kit (KDT940). This kit addresses the excessive differential movement found with factory bushings during aggressive acceleration and gear changes. By securing the differential more effectively within the rear cradle, this kit ensures more consistent power delivery and a more connected driving feel without the harshness of solid mounts.

Each bushing is engineered using Whiteline’s advanced synthetic elastomer formulation, which is specifically designed to resist degradation from oil, grease, ozone, and weathering. All metal components feature a specialized protective plating that acts as a hard skin, offering significantly better corrosion resistance than traditional paint for long-term durability in harsh environments.

• Reduces differential movement for improved throttle response and power transfer
• Advanced synthetic elastomer formulation resists oil, grease, and ozone
• Protective plating on metal components for superior corrosion resistance
• Specially bonded design optimized for high-load bearing applications
• Engineered for precise fitment within the factory differential cradle
• Manufacturer Part Number: KDT940

Fits select 1997-2006 Honda CR-V, 2000-2005 Honda Civic, and 2002-2006 Acura RSX.

Whiteline Plus sway bar mount bushings are a critical suspension service item designed to replace worn or soft factory rubber. These bushings utilize a high-grade synthetic elastomer formulation that offers superior resistance to oil, grease, ozone, and weathering compared to OE components. By maintaining tighter tolerances, they ensure the sway bar performs as intended, improving chassis balance and steering predictability.

• Precision Design: Features internal bore knurling and grease retention lips to provide continual self-lubrication and minimize friction.
• Premium Material: Synthetic elastomer construction provides the durability of polyurethane with the ride quality characteristics of rubber.
• Extended Service Life: Includes extreme pressure molybdenum disulphide (LM) based grease to prevent squeaking and ensure longevity.
• Critical Fitment Note: Designed for 20mm diameter sway bars; please measure your vehicle's sway bar before installation to confirm sizing.
• Manufacturer Part Number: W23378

Fits 2013-2020 Subaru BRZ, 2013-2016 Scion FR-S, and 2017-2020 Toyota 86.

Restore chassis response and maintain sway bar efficiency with the Whiteline 16mm Rear Sway Bar Mount Bushing. Over time, factory rubber bushings perish, leading to play in the suspension and reduced handling precision. This replacement bushing kit is engineered to provide a secure, stable mounting point, ensuring your rear sway bar performs as intended during cornering and weight transfer.

• Advanced Material: Features a proprietary synthetic elastomer formulation resistant to oil, grease, ozone, and environmental weathering for a long service life.
• Precise Fitment: Designed for 16mm sway bar diameters, ensuring a snug fit to the factory mounting brackets.
• Easy Installation: Engineered for a straightforward bolt-on process that does not require specialized shop tools; includes a detailed installation guide.
• Manufacturer Part Number: KSK106-16
• Bore Size: 16mm

Fits select 2009-2024 Dodge Ram 1500 and Ram 1500 Classic models.

A common limitation of modern independent front suspension (IFS) 4WD systems is the lack of adjustment range for successful wheel alignments, especially once the vehicle is lifted more than 1 inch. The Whiteline KTA322 offset Upper Control Arm (UCA) is an all-in-one solution engineered specifically for vehicles lifted between 30mm and 70mm (approx. 1.2 to 2.75 inches).

These arms resolve camber and caster issues while improving ball joint articulation and providing necessary clearance to the coilover strut at both ride and droop heights. Featuring proprietary GIIRO bushing technology, these maintenance-free arms offer increased articulation without the noise or service requirements of traditional bushings.

• MPN: KTA322
• Caster Correction: Increases caster by +2.5 to +3.5 degrees
• Camber Correction: Up to 1.5 degrees of negative camber increase
• Bushing Tech: Maintenance-free GIIRO bushings for superior articulation
• Finish: Heavy-duty protective powder coating for corrosion resistance
• Compatibility: Designed for lifts between 30mm and 70mm

Fits select 2003-2009 Nissan 350Z and Infiniti G35 models.

The Whiteline WEK003 Vehicle Essentials Kit is a comprehensive suspension upgrade designed to eliminate slop and improve handling response. By replacing high-compliance rubber factory bushings with performance-engineered synthetic elastomer components, this kit maintains correct suspension geometry under load, providing more consistent grip and precise steering feedback. This kit specifically targets the front control arm bushings to sharpen turn-in, and includes a rear differential bushing set to improve power delivery by reducing drivetrain movement.

• Vehicle Control: Upgraded front control arm bushings reduce dynamic alignment changes.
• Drivetrain Efficiency: Positive traction rear differential bushings minimize housing twist for better launch and throttle response.
• Advanced Materials: Synthetic elastomer formulation is resistant to oil, grease, ozone, and weathering for long-term durability.
• Self-Lubricating: Features internal grease reservoirs that provide continual lubrication to minimize friction and noise.
• Corrosion Protection: Metal components are finished with protective plating and powder coating for superior resistance in harsh environments.
• Includes: Synthetic elastomer bushings, protective hardware, and extreme pressure molybdenum disulphide (LM) based grease.
• Manufacturer Part Number: WEK003

Fitment Table:

Fits select 1986-2001 Acura Integra and 1988-2001 Honda Civic, CRX, and CR-V models. These heavy-duty Whiteline rear upper control arms are designed to provide precise on-car camber adjustment, allowing you to optimize your vehicle's alignment for improved traction, increased cornering grip, and extended tire life.

Constructed from premium anodized alloy, these arms feature a long-lasting protective barrier against corrosion and wear. The kit utilizes Whiteline's latest synthetic elastomer bushing technology, formulated for superior resistance to oil, grease, ozone, and weathering. This specially bonded design ensures the strength and durability required for high-load suspension applications.

• Provides on-car camber adjustability to correct tire wear and handling behavior
• Improves cornering grip and overall rear-end stability
• Anodized alloy construction for maximum corrosion resistance
• Synthetic elastomer bushings resist environmental degradation and oil contamination
• Manufacturer Part Number: KTA332
• Includes: Pair of 2 rear upper control arms

Fits select 2008-2014 Subaru Impreza, WRX, and STI models.

The Whiteline BSK012 is a comprehensive suspension solution designed to reduce body roll and neutralize understeer. This kit replaces the restrictive factory components with heavy-duty 22mm bars to increase chassis rigidity and steering response. By significantly reducing body flex during cornering and rapid lane changes, it maintains a more consistent contact patch for improved grip and driver confidence.

The kit features a 2-point adjustable front bar and a 3-point adjustable rear bar, allowing for precise chassis tuning. The included heavy-duty end links utilize forged ends and steel ball joints to eliminate the deflection found in original equipment. To ensure long-term performance, the synthetic elastomer bushings are designed with internal bore knurling and grease retention lips for superior lubrication and noise-free operation.

• Front Sway Bar: 22mm 2-point adjustable
• Rear Sway Bar: 22mm 3-point adjustable
• Bushings: Synthetic elastomer resistant to oil, grease, and ozone
• End Links: Heavy-duty adjustable alloy links with up to 25mm of adjustment
• Lateral Locks: DIY lateral locks prevent bar shifting under cornering loads
• Finish: Protective plating and powder coating for long-term corrosion resistance
• Grease: Includes molybdenum disulphide (LM) based grease
• Manufacturer Part Number: BSK012