Fits 2014-2024 Ram 2500 and 3500 heavy-duty trucks (6.4L).

The BD Diesel Driver Side Exhaust Manifold is designed as a direct-fit replacement for the factory manifold on Ram 6.4L Hemi engines. These heavy-duty applications often face extreme heat cycles that can lead to warping, cracked castings, or sheared manifold bolts. This replacement component addresses those failures, restoring a proper seal between the cylinder head and the exhaust system to prevent performance-robbing leaks.

• Direct replacement for the driver-side (left) factory manifold
• Engineered to maintain correct exhaust flow and meet OE fitment tolerances
• Durable construction designed to withstand the thermal stresses of towing and hauling
• Helps eliminate exhaust leaks that can affect engine sensors and cabin comfort
• Manufacturer Part Number: 1041456

Fits select 2014-2024 Ram 2500 and 3500 models (6.4L).

This BD Diesel Exhaust Manifold Kit is engineered as a precision-fit replacement for the 6.4L Hemi engine in heavy-duty Ram trucks. Designed to restore exhaust system integrity, this kit provides a reliable solution for the common heat-cycling and warping issues found in factory manifolds. Each kit is manufactured to meet or exceed original equipment tolerances, ensuring a flat sealing surface against the cylinder head to prevent exhaust leaks.

• Direct-fit replacement for heavy-duty 2014-2024 Ram 2500 and 3500 platforms
• Engineered specifically for the 6.4L Hemi engine
• Addresses exhaust leak issues caused by manifold distortion
• Manufacturer Part Number: 1041454

Fits 2019-2024 Ram 2500 and 3500 4WD models with the 68RFE transmission.

The BD Diesel TorqueMaster Performance Transmission is engineered to handle the increased horsepower and torque of modern diesel applications. This 4WD-specific unit features a billet input shaft designed to withstand the "snap" associated with rapid throttle transitions and high-output tuning that often shears factory components. To ensure long-term durability, BD utilizes QT100 pressure plates which allow for increased clutch counts while reducing deflection and distortion within the clutch drum.

Hydraulic integrity is reinforced via a custom bonded gasket valve body separator plate and a hard-anodized valve body, eliminating internal cross-leaks and maintaining line pressure. The included BD Deep Sump oil pan provides additional fluid capacity and cooling while increasing case rigidity to prevent flex under load.

• Billet input shaft handles high-torque shocks and rapid throttle input
• Overdrive and 2C clutch counts increased by 33%
• Durable QT100 pressure plates eliminate drum distortion
• Steel girdle added to 2C piston for a broader apply area
• Custom Big Stack overdrive shaft and reinforced accumulator plate
• New 4C billet spring retainer and new solenoid pack installed in every unit
• Heavy-duty cam and roller design low-reverse one-way clutch
• Hard-anodized valve body for wear resistance
• Manufacturer Part Number: 1064294B

Note: Special tuning is required for 2019-up applications to support increased line pressure. Line pressure controller is not included. Damage from race abuse is not covered.

Maintain the stopping power and safety of your diesel rig with the BD Diesel Replacement Air Cylinder. This component is the primary actuator for BD Diesel air-powered exhaust brake systems, responsible for the precise opening and closing of the butterfly valve within the exhaust stream. When a cylinder develops leaks or internal wear, it can lead to sluggish response or a complete loss of engine braking performance.

Constructed to withstand the harsh thermal cycles and road debris typical of under-vehicle mounting, this cylinder ensures your exhaust brake provides the necessary backpressure for controlled descents. It is a direct-fit replacement part designed to bolt into existing BD Diesel brake assemblies, restoring factory-level actuation speed and holding force.

• Manufacturer Part Number: 1120100
• System Type: Air-actuated exhaust brake replacement part
• Function: Restores mechanical movement to the exhaust brake butterfly valve
• Durability: Built for high-heat automotive environments and pneumatic reliability
• Application: Specifically engineered for BD Diesel exhaust brake kits

Fits select 1998-2018 Dodge and Ram 2500 and 3500 trucks (5.9L / 6.7L).

The BD Diesel Exhaust Manifold T4 Mount Gasket Set is engineered to provide a reliable, high-temperature seal for Cummins diesel engines upgraded with T4-flange turbochargers. This comprehensive set replaces worn factory or aftermarket gaskets to ensure maximum exhaust gas velocity and prevent boost leaks that can lead to increased exhaust gas temperatures (EGTs) and decreased performance.

• Designed specifically for T4 turbocharger mounting applications
• Includes multi-layer or high-temperature resistant exhaust manifold gaskets
• Ensures airtight sealing between the cylinder head and manifold
• Precision-stamped for exact fitment and port alignment
• Manufacturer Part Number: 1045986-T4
• Warranty: 12-Month / 12,000-Mile

Fits select 2017-2023 Chevrolet Silverado and GMC Sierra 2500/3500 HD (6.6L Duramax L5P).

The BD Diesel Screamer Turbo is a high-performance, drop-in replacement designed for the L5P Duramax platform. Engineered to appear stock while delivering significantly improved airflow, this turbocharger is a true bolt-on upgrade that maintains compatibility with factory emissions equipment and does not require custom tuning or set engine codes. It utilizes a custom Mixed Flow Turbine (MFT) wheel with a 65mm exducer to reduce drive pressure and lower exhaust gas temperatures (EGTs) without sacrificing low-end responsiveness.

Equipped with a larger 66.2mm (and 64.0mm) billet compressor wheel, the Screamer increases airflow up to 80 lb/min, supporting up to 680 horsepower with the right supporting modifications. The larger 67mm turbine wheel ensures efficient exhaust flow, allowing for more boost and lower EGTs even at increased power levels. This kit includes a high-flow intake horn to maximize intake efficiency from the start.

• Direct Bolt-In: Replaces factory turbo using original mounting points and emissions hardware.
• Advanced Aero: 66.2mm billet compressor wheel and 67mm turbine wheel for 80lb/min airflow.
• Mixed Flow Technology: MFT turbine wheel with 65mm exducer reduces backpressure.
• Performance Gains: Supports up to 680hp while maintaining daily drivability.
• Included Components: Includes high-flow intake horn for a complete installation.
• Manufacturer Part Number: 1045844

Fits select 2013-2025 Ram 2500 and 3500 (Gas & Diesel).

Replace weak factory suspension components with the BD Diesel Sway Bar End Links Kit. Engineered for heavy-duty use, these links are constructed with a high-strength, forged, and heat-treated steel center section. The center is protected by a black Cerakote finish for superior corrosion resistance and longevity. These links utilize oversized ball joints that allow for greater articulation and higher load capacities than standard bushing-only replacements, addressing common failure points where stock parts break or wear rapidly under heavy loads.

• High-strength forged and heat-treated steel center section
• Black Cerakote finish for maximum durability and corrosion resistance
• Oversized ball joints for increased load capability and longer service life
• HD polyurethane axle-side bushings with steel sleeves
• Optimized for stock height up to 2-inch suspension lifts
• Fully serviceable design with replacement wear items available (Service Kit P/N 1312068)
• Estimated installation time: 1 hour
• Manufacturer Part Number: 1032052

Note: Trucks lifted more than 3 inches require a sway bar offset spacer, which is typically included in most aftermarket lift kits.

Fits 1994-1998 Dodge Ram 2500 and 3500 models equipped with the 5.9L 12-valve Cummins engine and Bosch P7100 injection pump.

The BD Diesel 3000 RPM Governor Spring Kit is designed to overcome the factory defueling limits of the Bosch P7100 mechanical injection pump. By replacing the original governor springs, this kit enables your Cummins engine to maintain fueling up to 3,000 RPM. This modification significantly improves mid-to-high-end throttle response and provides a broader power band, reducing the need for premature gear shifts during towing or performance driving.

• Increases usable engine speed to 3,000 RPM for improved horsepower levels
• Enhances throttle response across the entire RPM range
• Optimizes pump output without requiring replacement plungers or barrels
• Designed specifically for the P7100 Bosch mechanical injection pump
• Manufacturer Part Number: 1040187
• Warranty: 12-Month / 12,000-Mile

Technical Note: This kit involves precise internal modifications to the fuel injection pump. Installation must be performed by a trained, qualified P7100 technician. Improper installation can result in engine damage, excessive heat/smoke, or poor engine performance.

Fits select 2017-2024 Ford F-150, Bronco, Explorer, and Ranger models equipped with 10R60 or 10R80 10-speed automatic transmissions.

Maintain lower operating temperatures and extend the service life of your transmission with the BD Diesel Deep Sump Transmission Pan Kit. This heavy-duty upgrade increases fluid capacity by 2.1 quarts, providing a larger volume of oil to dissipate heat effectively. The cast aluminum construction features integrated external cooling fins for maximum heat dissipation while significantly increasing transmission case rigidity to help prevent twisting under heavy loads.

Designed for professional-grade performance and straightforward maintenance, the pan includes a high-strength magnetic drain plug to capture metallic wear particles and a 1/8-inch NPT port for an aftermarket temperature sender. The kit is engineered to retain factory heat shields and comes complete with all necessary installation hardware.

• Increased Volume: Adds 2.1 quarts of fluid capacity over the factory pan.
• Heat Management: Cast aluminum construction with external cooling fins for superior heat dissipation.
• Case Rigidity: Structural design helps prevent transmission case twisting.
• Complete Kit: Includes OEM gasket, heat shield studs, magnetic drain plug, temperature port plug, and mounting hardware.
• Finish: Durable black powder coat for long-lasting corrosion resistance.
• Transmission Fitment: Compatible with Ford 10R60 and 10R80 transmissions.
• Manufacturer Part Number: 1061718

Fits select 2001-2016 Chevrolet Silverado/Express and GMC Sierra/Savana (6.6L).

The BD Diesel Upgraded Exhaust Manifold Kit is engineered to eliminate the flow restrictions found in factory 6.6L Duramax manifolds, particularly the driver-side bottleneck present on 2001-2006 models. This kit provides a 5% increase in overall exhaust flow, improving the efficiency of exhaust gas transfer to the turbocharger for better performance and lower EGTs.

Constructed for long-term durability, these manifolds feature 65% thicker wall castings made from high-silicon ductile iron. This heavy-duty material choice specifically targets the common issues of warping and cracking found in thin-walled OE units. Each kit is a direct drop-in replacement and includes a pre-drilled, tapped pyrometer port on the driver's side manifold for easy EGT sensor integration.

• 65% thicker cast iron walls for superior crack resistance
• High-silicon ductile iron construction to prevent warping
• Increases exhaust flow by 5% over stock
• Pre-drilled and tapped pyrometer port (driver side)
• High-temperature paint finish for corrosion protection
• Includes all necessary gaskets and fasteners for installation
• Manufacturer Part Number: 1041459

Fits select 2007-2018 Dodge and Ram 2500/3500 trucks (68RFE transmission).

The BD Diesel Stage 4 Master Build-It Rebuild Kit provides the same heavy-duty components used in BD’s own high-performance transmissions. This comprehensive kit is engineered to solve common 68RFE failure points by increasing clutch capacity and hydraulic apply pressure. It includes durable QT100 pressure plates that allow for increased clutch counts while reducing deflection and distortion within the clutch drum. For maximum rigidity, the kit features stiffer billet intermediate and Overdrive/Reverse reaction plates.

The included ProTect68 Pressure Control module dynamically adjusts hydraulic apply pressures based on engine load and turbo boost, delivering up to 250 psi at full throttle—an 80% increase over the stock unit. This increase in pressure, combined with a 17% increase in Overdrive clutch capacity and a 20% increase in Underdrive capacity, ensures reliable torque holding for towing and performance applications.

• Manufacturer Part Number: 1062025
• Delivers up to 250 psi clutch apply pressure
• Custom bonded gasket valve body separator plate to stop internal cross leaks
• Raybestos friction materials for 2C, 4C, Overdrive, and Reverse clutches
• Heavy-duty accumulator plate to prevent blowout
• Upgraded heavy-duty one-way clutch/sprag
• Includes billet 4C spring retaining ring and pump cover
• Complete overhaul gasket kit with solenoid pack connector and output shaft seals
• Pan and spin-on filters included
• 12-Month / 12,000-Mile Warranty

Fits 2013-2018 Ram 3500 (6.7L).

The BD Diesel 1046068 exhaust manifold kit is a heavy-duty replacement for the stock manifold on 6.7L Cummins engines, specifically engineered to combat the extreme thermal cycling common during DPF regeneration. Cast from high-silicon ductile iron with thick-walled construction, this fully divided pulse manifold resists the cracking and warping that plague factory units. Integrated precision slip joints allow for controlled expansion and contraction, effectively eliminating cyclic thermal fatigue and preventing exhaust leaks.

This comprehensive kit provides a complete installation solution, including Grade 10.9 black oxide-coated hardware and all necessary gaskets for the exhaust ports, turbo mount, and EGR port. It is fully EGR-compatible and comes pre-drilled for pyrometer probes to simplify EGT monitoring.

• Material: High-silicon ductile iron casting
• Hardware: Grade 10.9 black oxide-coated bolts and spacers
• Design: Fully divided pulse manifold with expansion slip joints
• Compatibility: Replaces Chrysler OE #68205983AA
• Installation: Pre-drilled for pyrometer probes
• Certification: SEMA Certification No. SC-BDD01-0077
• Included Gaskets: EGR port, exhaust port, and turbo mount gaskets

Vehicle Fitment:

This BD Diesel V-band clamp is engineered specifically for Borg Warner turbochargers equipped with a 4.62-inch Half Marmon flange. It provides a reliable, high-pressure seal between the turbocharger turbine housing and the exhaust downpipe, critical for maintaining exhaust velocity and preventing boost-robbing leaks in performance diesel systems.

• Designed specifically for 4.62in Half Marmon flange profiles
• Compatible with select Borg Warner turbocharger housings
• Provides a secure, leak-free connection for high-temperature exhaust paths
• Durable construction to withstand extreme thermal cycling and vibration
• Manufacturer Part Number: RG-VT10481

Fits select 1989-1998 Dodge D250, D350, W250, W350, and Ram 2500/3500 models.

Descending heavy grades with a trailer can quickly overheat service brakes, leading to dangerous brake fade and excessive component wear. The BD Diesel Exhaust Brake provides a reliable solution by using variable regulating back-pressure to safely slow your vehicle. This turbo-mount design is engineered for 12-valve Cummins engines, bolting directly in place of the factory exhaust elbow between the turbocharger and the exhaust system.

Built for the harsh environment of the exhaust stream, the brake features a rugged cast-iron housing and a stainless steel butterfly shaft. BD Diesel utilizes an exclusive AlumiBronze bushing and a positive-sealing piston ring to ensure smooth operation and a leak-free seal. For these earlier Dodge models, the brake valve is actuated by a powerful 3-inch vacuum cylinder, providing up to 150 retarding horsepower throughout the engine's RPM range.

• Manufacturer Part Number: 2033135
• Actuation: 3-inch vacuum cylinder
• Retarding Pressure: 60psi
• Construction: Rugged cast-iron housing with stainless steel butterfly shaft
• Bushing: Exclusive AlumiBronze bushing for high-heat durability
• Variable Orifice Technology: Maintains consistent retarding performance
• Installation: Turbo-mount design replaces the factory elbow
• Includes: Cast iron brake assembly, vacuum cylinder, and corrosion-resistant stainless steel mounting hardware
• Note: Automatic transmission models require BD Diesel AutoLoc and PressureLoc kits for proper torque converter clutch engagement

Fits 1999-2003 Ford F-250 and F-350 Super Duty models with the 7.3L Powerstroke engine.

Descending steep grades with heavy trailers can quickly overwhelm factory service brakes, leading to dangerous brake fade and excessive rotor wear. The BD Diesel Variable Regulating Back-Pressure Exhaust Brake (MPN 2023144) is engineered to solve this by providing up to 150 retarding horsepower throughout the engine's RPM range. This turbo-mount design bolts directly in place of the factory elbow between the turbocharger and the exhaust system, providing a clean, secure installation that maximizes braking efficiency.

Constructed for the harsh environment of the exhaust stream, this brake features a rugged cast-iron housing and a solid, offset stainless steel butterfly. The internal mechanisms utilize BD’s exclusive AlumiBronze bushings and positive sealing piston rings to prevent carbon build-up and rust, ensuring smooth operation for hundreds of thousands of miles. The system is actuated by a robust air cylinder and includes a durable air compressor that can also be used for auxiliary applications like air bags or horns.

• Provides up to 150 retarding HP to reduce service brake wear
• Variable Orifice Technology for consistent performance across the RPM range
• Rugged cast-iron housing with AlumiBronze bushings for heat resistance
• Stainless steel butterfly shaft and corrosion-resistant mounting hardware
• Piston ring-style seals for leak-free operation
• Includes air compressor, mounting hardware, and EGT port
• Manufacturer Part Number: 2023144

Fits select 2011-2014 Ford F-250 and F-350 Super Duty trucks (6.7L Power Stroke).

Maximize your towing control and safety with the BD Diesel Variable Vane Brake (VVB). This system utilizes the existing variable geometry turbocharger (VGT) technology in your 6.7L Power Stroke engine to provide supplemental braking force. By electronically closing the turbo vanes, the system creates up to 60 PSI of exhaust backpressure in the combustion chamber, generating over 110 retarding horsepower to help maintain speeds on steep descents without overheating your service brakes.

Designed for seamless integration, the VVB communicates with the factory cruise control to automatically manage acceleration and deceleration. It features a simple plug-and-play installation into factory ports and includes an in-dash push-to-engage button for immediate activation.

• Electronically closes turbocharger vanes to provide engine braking
• Creates up to 110+ retarding horsepower
• Delivers up to 60 PSI exhaust backpressure
• Integrated with cruise control to maintain vehicle speed
• Simple plug-and-play installation into factory ports
• Includes in-dash push-to-engage button
• Manufacturer Part Number: 2001102
• Warranty: 12 Months or 24,000 Miles

Fits 2008-2010 Ford F-250 and F-350 Super Duty (6.4L).

The BD Diesel Variable Vane Exhaust Brake (VVB) leverages the factory variable vane turbocharger technology on your Power Stroke to provide reliable retarding force. By electronically closing the turbo vanes, this system generates exhaust backpressure in the combustion chamber, creating resistance against the pistons to slow the vehicle. This helps maintain controlled speeds on steep descents and curves while reducing wear on your service brakes.

The VVB integrates with your truck's factory cruise control and Tow/Haul modes to automatically manage acceleration and deceleration. It includes an in-dash rotary switch with three different modes, including automatic downshifting programs to keep engine RPMs optimized for maximum braking power. Installation is simplified via plug-and-play connections to existing factory ports.

• Manufacturer Part Number: 2001100
• Retarding Force: Up to 130 HP
• Exhaust Backpressure: Up to 70 PSI
• Switch Type: In-dash "Push to Engage" rotary button
• Installation: Plug-and-play factory port integration
• Warranty: 12-month / 24,000-mile limited warranty

Fits select 2008-2010 Ford F-250 and F-350 Super Duty models (6.4L).

Restore the boost and reliability of your 6.4L PowerStroke engine with this remanufactured BD Diesel Twin Turbo Assembly. Designed as a direct-fit replacement for the factory high-pressure and low-pressure turbo units, this assembly is remanufactured to new factory standards to ensure it meets original equipment tolerances and performance specifications.

By replacing the entire twin turbo assembly, you address issues such as bearing wear, seized vanes, or oil seal failure that are common in high-mileage diesel applications. This unit is built to provide consistent power delivery and efficient spooling, maintaining the drivability and towing capacity of your Super Duty truck while ensuring compatibility with factory intake and exhaust connections.

• Manufacturer Part Number: 179514-B
• Condition: Remanufactured to new factory standards
• Engine Compatibility: Ford 6.4L PowerStroke Diesel
• Fitment Type: Direct OE-style replacement

Ensure your drivetrain fluid remains free of harmful contaminants with the BD Diesel Magnetic Drain Plug (1601613). Designed specifically as a replacement component for BD Diesel aftermarket transmission pans and differential covers, this plug serves as a critical line of defense for your gears and bearings.

• Magnetic Protection: Features a high-strength integrated magnet that attracts and holds fine ferrous metal particles, preventing them from circulating through the system.
• Precision Machining: Threaded to 3/4 in. x 16 NF for a precise, leak-free fit in compatible BD housings.
• Durable Construction: Built to withstand the high temperatures and pressures found in heavy-duty towing and performance applications.
• Maintenance Essential: Simplifies fluid service by allowing you to inspect the magnet for debris, providing a clear indicator of internal component health.

This unit replaces the factory-supplied plug included with BD Diesel transmission pans and differential covers using the 3/4-16 thread pitch.

Fits select 1999-2003 Ford F-250 Super Duty, F-350 Super Duty, and 2000-2003 Ford Excursion models equipped with the 4R100 transmission.

The BD Diesel Bypass Tube Eliminator Kit addresses a common failure point in Ford 4R100 cooling systems. The original equipment cooler bypass tube assembly is known to fail internally, often diverting transmission fluid away from the cooler during high-load situations when thermal management is most critical. By installing this eliminator kit, you ensure that fluid is always directed through the transmission cooler, preventing overheating and extending the life of your drivetrain.

This kit is an essential preventative maintenance item recommended during transmission rebuilds, auxiliary cooler installs, or general service work. The kit includes precision-machined aluminum shunts and sealing washers to provide a secure, leak-free solution that replaces the problematic factory hardware.

• Removes the failure-prone OEM cooler bypass tube assembly
• Ensures continuous fluid flow through the transmission cooler
• Precision-machined aluminum shunts and sealing washers included
• Standard equipment in BD 4R100 transmission and auxiliary cooler kits
• Manufacturer Part Number: 1600036
• Warranty: 12-Month / 12,000-Mile

The BD Diesel 1453106 is a 23-inch flexible turbo oil drain line designed to simplify plumbing for high-performance diesel applications. This versatile drain line is engineered to solve the fitment issues common in single or compound turbocharger installations where rigid factory lines are no longer compatible.

Built with a common mounting flange that fits a wide range of turbocharger frames, this 23-inch line provides the flexibility needed to safely route oil back to the engine block in custom engine bay configurations. It is specifically designed to slip into Cummins oil drain ports for a secure and reliable connection.

• Fits turbocharger models: S300, S400, HX35, HX40, HX50, and many Garrett frames
• 23-inch length allows for flexible routing in custom single or compounded turbo setups
• Designed to slip directly into factory Cummins oil drain ports
• High-strength construction for long-term durability in high-heat environments
• Includes mounting gasket for a leak-free seal
• Manufacturer Part Number: 1453106

Designed for versatile turbocharger installations, the BD Diesel 12-inch Flexible Turbo Oil Drain Line provides a reliable oil return path for high-performance diesel applications. This flexible line replaces rigid or custom-fabricated tubing that can be prone to cracking or difficult to align during installation.

• Universal Turbo Fitment: Engineered to mount to S300, S400, HX35, HX40, and HX50 turbos, as well as many Garrett models.
• Cummins Integration: The line is specifically designed to slip directly into standard Cummins oil drain ports for a secure, leak-free connection.
• Custom Setup Ready: With 12 inches of length and a flexible design, it is an ideal solution for both single and compounded turbocharger configurations.
• Complete Kit: Includes the necessary gasket for a complete installation.

Manufacturer Part Number: 1453105

Fits 2007-2018 Dodge and Ram 2500/3500 models equipped with the 6.7L Cummins diesel engine.

The BD Diesel Turbocharger Oil Drain Line (1453104) is a precision-engineered, OEM-style replacement designed to restore reliable oil return from the turbocharger to the engine block. Over time, factory return lines can become brittle or develop leaks at the seals; this pre-bent tube provides a direct-fit solution that mirrors factory routing for easy installation.

To ensure a long-lasting, leak-free seal, this kit includes high-quality Viton O-rings known for their superior resistance to high temperatures and chemical degradation in diesel environments. A new mounting gasket is also included, providing all necessary components to complete the job correctly the first time.

• Direct replacement for OEM part number 1453104
• Precision pre-bent tubing ensures factory-correct fitment and clearance
• Includes high-temperature Viton O-rings for maximum seal durability
• Includes 1 new mounting gasket
• Restores proper oil drainage to prevent turbocharger seal issues

Fits select 2003-2007 Dodge Dakota, Durango, Ram 1500, Ram 2500, Ram 3500, and Ram Van models.

The BD Diesel Turbo Compressor Elbow is a precision-engineered 90-degree adapter designed to facilitate the installation of straight-outlet turbochargers on specific Dodge applications. By converting the compressor housing outlet to a 90-degree bend, this adapter ensures proper alignment with the intercooler piping in 2003-2007 chassis, allowing for a seamless integration of upgraded or aftermarket turbochargers.

• Adapter Angle: 90 Degrees
• Function: Adapts straight outlet turbos for Dodge chassis fitment
• Manufacturer Part Number: 1452226

Ensure a secure, leak-free seal on your turbocharger discharge with the BD Diesel V-Band Clamp (1452225). This heavy-duty clamp is specifically engineered for S300 series compressor housings utilizing a Half Marmon flange profile, providing the precise clamping force necessary to maintain integrity under high boost pressures and extreme heat cycles.

Designed for performance diesel applications, this clamp is an essential component for custom turbo installations, housing replacements, or when re-clocking a turbocharger. The high-strength construction resists vibration-induced loosening, ensuring your charge air system remains pressurized during heavy towing or high-performance use.

• Designed specifically for S300 compressor housings with Half Marmon flanges
• Ensures a high-pressure, leak-proof seal between the turbo and charge pipe
• Durable construction built to withstand extreme diesel engine bay temperatures
• Direct replacement for BD Diesel S300 turbo hardware
• Manufacturer Part Number: 1452225

Fits 2007-2012 Dodge Ram 2500 and 3500 (6.7L).

The BD Diesel 1407046 VGT Turbo Actuator Harness Adapter is a critical component for 2007.5-2012 6.7L Cummins owners upgrading or maintaining their turbocharging system. This harness enables the retrofit of newer style VGT actuators or complete turbocharger assemblies onto earlier trucks, providing a secure, direct-fit connection that maintains OEM performance standards. Engineered with high-quality connectors and wiring, it solves compatibility issues when updating from older actuator designs.

• Enables retrofitting of newer style VGT actuators or turbocharger assemblies
• Direct-fit replacement for 2007.5-2012 Cummins 6.7L applications
• Constructed from high-quality materials for maximum durability and heat resistance
• Maintains critical electrical signals for proper turbocharger vane positioning
• BD Diesel Part Number: 1407046

Maintain a secure seal on high-pressure intake and cooling lines with the BD Diesel 1405211 High Torque Hose Clamp. Designed for demanding performance diesel environments, this 3-inch clamp features a spring-loaded mechanism that automatically compensates for the thermal expansion and contraction of silicone boots and hoses. This ensures consistent clamping force through extreme heat cycles, preventing boost leaks and blow-offs.

Constructed with a 300 series stainless steel band, this clamp provides superior corrosion resistance and high tensile strength for heavy-duty applications. It is an essential component for intercooler piping, turbocharger outlets, and cooling system upgrades where standard worm-gear clamps may fail under pressure.

• Diameter: 3.00 inch
• Material: 300 Series Stainless Steel Band
• Design: Spring-loaded for constant tension
• Application: High-torque sealing for boost and coolant hoses
• Sold individually
• Manufacturer Part Number: 1405211
• Warranty: 12 Months or 24,000 Miles

Maintain reliable sealing on high-pressure boost, intake, and coolant lines with the BD Diesel 1405209 High Torque Hose Clamp. Specifically engineered for performance diesel applications, this 2.75-inch clamp utilizes a spring-loaded design that maintains consistent tension even as components expand and contract through extreme thermal cycles. This prevents the common leaks associated with standard worm-gear clamps that lose their grip under heat-soak conditions.

• MPN: 1405209
• Size: 2.75 inch diameter
• Material: 300 Series Stainless Steel band for maximum corrosion resistance
• Design: High-torque, spring-loaded construction for dynamic clamping force
• Reliability: Clamping force remains consistent through repeated heat cycles
• Warranty: 12 Months or 24,000 Mile manufacturer warranty
• Sold individually

Optimized for high-performance applications, this BD Diesel high-flow air filter is designed specifically for use with Scorpion Turbo Kits. The washable, cone-style design ensures long-term durability and consistent airflow, replacing standard filters with a reusable unit that maintains engine protection while reducing restriction.

• Construction: Washable and reusable cone-style media for extended service life
• Compatibility: Specifically engineered to fit with BD Diesel Scorpion Turbo Kits
• Inlet Diameter: 4 inches
• Overall Height: 9.7 inches
• Base Diameter: 8 inches
• Top Diameter: 7 inches
• Manufacturer Part Number: 1401604

Fits select 2000-2009 Dodge Ram 2500 and 3500 trucks.

Maintain the performance and stability of your front suspension with the BD Diesel 1312051 Replacement Bushing Set. This kit is specifically engineered to service BD's 1032050 Sway Bar End Links, which are high-strength upgrades for heavy-duty Dodge Ram trucks. While even performance-grade links can eventually wear or "pound out" over years of high-articulation use and heavy loads, these replacement bushings allow you to restore tight handling and eliminate chassis noise without the cost of a full link assembly.

• Direct Service Part: Designed specifically for BD Diesel 1032050 sway bar end links.
• Restores Performance: Eliminates the play and noise caused by worn-out or compressed bushings.
• Heavy-Duty Design: Engineered to withstand the stress of performance diesel and towing applications.
• Manufacturer Part Number: 1312051.