Fits select 1985-2017 Cadillac, Chevrolet, and GMC vehicles, including Camaro, Corvette, Silverado, Sierra, and Escalade with LS-based engines.

DeatschWerks fuel injectors are engineered to provide precise fuel delivery and consistent performance for high-output applications. This 550cc/min kit is specifically designed for the LS platform, offering a drop-in fitment that replaces factory units to support increased horsepower levels. Each set is flow-balanced to within a tight tolerance, ensuring each cylinder receives the exact same volume of fuel for optimal engine safety and tuning stability.

These injectors are compatible with various fuel types and are extensively tested to ensure reliable operation under high rail pressures. The kit includes all necessary O-rings for a complete installation into factory or aftermarket fuel rails.

• Flow Rate: 550cc/min at 43.5 psi
• Configuration: Set of 8 matched injectors
• Fitment: LS-based engine platforms
• MPN: 16U-LS-0550-8
• Balanced and matched for consistent cylinder-to-cylinder fuel delivery

The DeatschWerks DW620R Series in-tank fuel pump is a high-volume solution designed for high-horsepower builds requiring maximum fuel delivery. Rated at 620lph, this pump provides the necessary flow to support forced induction and E85-fueled engines where standard performance pumps reach their limit. By mounting directly inside the fuel tank, it ensures consistent pressure and reduces the risk of fuel starvation during high-load scenarios.

• Flow Rate: 620 liters per hour (lph)
• Fitment: In-tank mounting configuration
• Installation: Includes universal install kit with filter sock, harness, and hardware
• Fuel Compatibility: Suitable for gasoline and ethanol-blended fuels
• Manufacturer Part Number: 9-621-0600

Fits select 1985-2017 Cadillac, Chevrolet, and GMC models, including Camaro, Corvette, Silverado, Sierra, and Escalade. This DeatschWerks LS fuel injector kit is engineered to provide the consistent, high-volume fuel delivery required for performance tuning and forced induction LS engine builds.

Every set is flow-balanced to within 1-2% to ensure even cylinder-to-cylinder fuel distribution, preventing lean conditions and optimizing engine health. These injectors are designed as a drop-in solution for LS platforms, utilizing modern EV14 technology for superior atomization and idle quality compared to older factory units. Whether you are upgrading a daily driver or a dedicated track vehicle, these injectors provide the necessary headroom for increased horsepower demands.

• Manufacturer Part Number: 16U-LS-0700-8
• Flow Rate: 700cc/min at 43.5 psi
• Quantity: Matched set of 8 injectors
• Engineered for LS-series intake manifolds and fuel rails
• Optimized for both pump gas and E85 compatibility

DeatschWerks 107R Race Octane Booster is engineered for high-performance and competition engines that require increased octane levels to prevent detonation and pre-ignition (knock). This specialized additive allows tuners and drivers to run more aggressive ignition timing and higher boost pressures by improving the stability of the fuel charge under high load.

• Brand: DeatschWerks
• Product Line: 107R
• Manufacturer Part Number: 1-107R-CS
• Volume: 32 oz. per can
• Quantity: Case of 8 cans
• Application: High-performance and racing engines

Supplied in a case of eight 32oz. cans, this bulk pack ensures you have a consistent supply for track days or high-performance events where maintaining fuel quality is essential for engine safety and peak power output.

Fits select 1985-2017 Cadillac, Chevrolet, and GMC models including Camaro, Corvette, CTS-V, Silverado, and Sierra.

DeatschWerks fuel injectors are engineered to provide precise fuel delivery and consistent performance for high-output LS-based engines. This matched set of eight 1000cc/min injectors is specifically designed for enthusiasts and builders needing reliable, high-flow fueling for forced induction or high-horsepower naturally aspirated applications. Each injector in this kit is flow-matched to ensure balanced cylinder-to-cylinder performance, which is critical for maintaining safe air-fuel ratios and maximizing tuning potential.

• Manufacturer Part Number: 16U-LS-1000-8
• Flow Rate: 1000cc/min
• Configuration: Matched set of 8 injectors
• Engine Compatibility: GM LS platforms
• Direct-fit installation for compatible OE fuel rails

Fits select 2005-2017 Cadillac, Chevrolet, and Pontiac models equipped with LS2 or LS3 V8 engines, including Camaro SS, Corvette, and GTO.

These DeatschWerks high-flow fuel rails are designed to provide the increased fuel volume and pressure stability required for performance LS2 and LS3 builds. Replacing the restrictive factory rails, this kit is an essential upgrade for enthusiasts looking to support higher horsepower levels in both naturally aspirated and forced induction applications.

• Engineered specifically for LS2 and LS3 intake manifold geometry
• High-flow internal bore diameter for consistent fuel delivery
• Replaces factory fuel rails for improved aesthetics and performance
• Manufacturer Part Number: 7-202

Vehicle Fitment

Fits select 1987-2000 BMW 323i, 325e, 325i, 325is, 325iX, 328i, 328is, and M3 (M20/M50/M52 engines).

DeatschWerks fuel injectors are engineered for high-performance applications where precise fuel delivery and increased flow are critical for engine health. This set of six 550cc injectors provides a direct-fit solution for BMW E30 and E36 chassis, designed to drop into the factory fuel rail and utilize the OE electrical harness for a straightforward installation. Every set is flow-balanced in-house to ensure consistent performance across all six cylinders, providing the tuning stability required for forced induction or high-output naturally aspirated builds.

• Flow Rate: 550cc/min at 43.5 psi
• Quantity: Set of 6 matched injectors
• Fitment Type: Drop-in compatibility for BMW M20, M50, and M52 engines
• Testing: Comprehensive in-house flow matching and battery offset data provided
• Manufacturer Part Number: 18U-09-0550-6

Fits 1985-1997 Ford Mustang (Base, GT, GTS, LX, SVO, SVT Cobra, and SVT Cobra R).

The DeatschWerks DW400 series provides a high-flow in-tank fueling solution for high-performance builds requiring significantly more volume than standard aftermarket pumps. Delivering a consistent flow rate of 415LPH, this pump is engineered to support elevated horsepower levels while maintaining reliable fuel pressure. This comprehensive package includes the 9-1044 installation kit, providing the necessary hardware to secure the pump into the factory tank assembly of Fox Body and SN95 Mustangs.

• Series: DW400 High-Flow In-Tank Pump
• Flow Rate: 415LPH
• Installation Kit: 9-1044 included for model-specific fitment
• Design: Specific to in-tank applications
• Manufacturer Part Number: 9-401-1044

Fits 1990-2001 Acura Integra and 1994-1997 Honda Civic del Sol VTEC.

The DeatschWerks B-Series high-flow fuel rail (MPN 7-400) is engineered to provide the increased fuel volume and pressure stability required for high-performance Honda and Acura builds. This rail replaces the restrictive factory unit, ensuring consistent fuel delivery across all injectors to support increased power levels and prevent lean conditions during high-demand operation.

• Large internal bore to minimize pressure drops and pulsations
• Precision machined for direct fitment to B-Series intake manifolds
• Compatible with factory and aftermarket fuel lines
• Engineered for 1990-2001 Acura Integra and 1994-1997 Civic del Sol VTEC
• Manufacturer Part Number: 7-400

Fits select 2004-2021 Pontiac GTO and Subaru models including Impreza, WRX, WRX STI, and Legacy.

The DeatschWerks DW440 (9-441-C102-0910) is a high-performance 440lph in-tank brushless fuel pump system designed to provide consistent fueling for high-horsepower applications. By utilizing brushless technology, this pump offers increased durability and lower current draw compared to traditional brushed motors, significantly reducing fuel heating. This kit includes a digital single/dual speed controller to manage pump output based on demand and the 9-0910 vehicle-specific installation hardware for a clean integration into the factory fuel tank.

• Flow Rate: 440lph
• Brushless Technology: Longer lifespan and cooler operation than brushed alternatives
• Controller: Included digital controller for single or dual-speed configuration
• Installation Kit: Includes 9-0910 kit components for specific Subaru and Pontiac fitment
• Configuration: In-tank design
• Manufacturer Part Number: 9-441-C102-0910

Fits 1998-2004 Ford Mustang (Base, GT, GT Bullitt, Mach 1, and SVT Cobra / Cobra R).

The DeatschWerks X3 Fuel Module provides a high-flow, drop-in fueling solution for the 1998-2004 Ford Mustang. Engineered to replace the factory unit, this module comes equipped with DW430C fuel pumps and a comprehensive installation kit, making it an essential upgrade for forced induction or high-output naturally aspirated SN95 and New Edge builds. The design ensures proper fitment within the OE fuel tank while delivering the increased volume required for demanding performance applications.

• Manufacturer Part Number: 9-437-7034
• Equipped with high-flow DW430C fuel pumps
• Direct fitment for 1998-2004 Mustang fuel tanks
• Includes all necessary installation hardware and components
• Retains factory fuel level sender mounting

The DeatschWerks 8AN Male Flare to 3/8" Hardline Compression Adapter provides a reliable, leak-free solution for plumbing fuel, oil, or coolant systems. This fitting allows for the direct adaptation of a standard 3/8-inch OD hardline to an -8AN hose assembly without the need for specialized flaring tools on the hard tubing.

Constructed for high-pressure automotive environments, this adapter features a durable matte black anodized finish for superior corrosion resistance. The compression design utilizes an included brass olive (ferrule) to create a mechanical seal against the hardline, ensuring a secure fit even under high-vibration or high-demand conditions.

• Manufacturer Part Number: 6-02-0110-B
• Adapter Size: 8AN Male Flare to 3/8" Hardline
• Material: Aluminum with Anodized Matte Black Finish
• Included Hardware: (1) Brass Olive/Ferrule Insert
• Installation: Compression fit; no flaring of the hardline required

Fits select 2006-2015 BMW 1 Series, 3 Series, and X1 (including 1M, 135i, 335i, and M3). This DeatschWerks X2 Series Dual Pump Module is a drop-in solution designed to support high-horsepower applications while maintaining daily drivability. By utilizing two DW810 brushless fuel pumps, this module provides massive flow rates with the increased efficiency, lower heat output, and superior reliability inherent to brushless technology.

The X2 module is engineered for a precise fit into the factory fuel tank, replacing the restrictive OE pump assembly. The CNC-machined components and integrated fuel level sender mount ensure that you don't sacrifice fuel gauge accuracy for performance. This system is ideal for forced induction builds and E85 conversions that require more fuel than a single pump can safely provide.

• Dual DW810 brushless fuel pumps for maximum flow and reliability
• Complete drop-in module replaces the factory BMW assembly
• Compatible with gasoline and E85 fuels
• Retains factory fuel level sending unit functionality
• Manufacturer Part Number: 9-811-7071

Detailed Vehicle Fitment:

• 2011-2013 BMW 1 Series M / 135is / 335is
• 2008-2013 BMW 135i / M3
• 2006 BMW 325i / 330i / 330xi
• 2007-2013 BMW 328i / 335i
• 2009-2013 BMW 328i xDrive
• 2009-2011 BMW 335i xDrive
• 2012-2015 BMW X1 (sDrive28i, xDrive28i, xDrive35i)

Fits select 2015-2024 Ford Mustang models (EcoBoost, GT, Bullitt, Mach 1, and Dark Horse).

The DeatschWerks DW400 Performance Pump Module (MPN 9-403-7231) provides a high-flow fuel delivery solution engineered specifically for the S550 and S650 Mustang chassis. Designed as a drop-in replacement for the factory unit, this module allows owners to support significantly higher horsepower levels without the complexity of universal external pumps. It retains full factory tank integration, including fuel level sender compatibility and bucket functionality to prevent fuel starvation during spirited driving.

• Manufacturer Part Number: 9-403-7231
• Series: DW400 Performance Pump Module
• Application: Direct-fit for 2015-2024 Ford Mustang fuel tanks
• Supports high-output EcoBoost, GT, and special edition Coyote platforms
• Engineered for reliable flow and drop-in installation

Fits 2011-2024 Ford Mustang models, including EcoBoost, GT, Shelby GT350/GT500, and Dark Horse.

The DeatschWerks X3 Series Fuel Pump Module (9-000-7032) is a high-performance, drop-in fueling solution designed to meet the increased flow requirements of modified 2011-2024 Ford Mustangs. Built as a direct replacement for the factory unit, this module simplifies the upgrade process by utilizing OE mounting points and electrical connections. Whether supporting a forced induction build or a high-output naturally aspirated setup, the X3 Series provides the reliable fuel delivery and consistent pressure necessary for performance driving.

• Manufacturer Part Number: 9-000-7032
• Series: X3 Series
• Configuration: Complete drop-in fuel pump module assembly
• Compatibility: Full range of S197, S550, and S650 Mustang platforms
• Designed to maintain factory fuel level sensor functionality and integration

Vehicle Fitment:

Fits select 2005-2021 Chrysler 300, Dodge Challenger, Dodge Charger, and Dodge Magnum models.

The DeatschWerks 8-05-7061 Performance Fuel Filter Module is engineered to provide superior filtration and high-flow reliability for Mopar LX, LC, and LD platform vehicles. This module serves as a direct-fit performance solution, ensuring your fuel system remains free of contaminants that can compromise high-flow fuel injectors and engine performance. Designed for enthusiasts running higher-than-stock fuel demands, it maintains the integrity of the fuel delivery system under the most demanding conditions, from daily driving to track use.

• Manufacturer Part Number: 8-05-7061
• Direct-fit module for factory fuel systems
• Optimized for performance and high-flow applications
• Protects critical engine components and fuel injectors from debris
• Compatible with Hemi, SRT, and Hellcat platforms

This fuel filter module is a critical upgrade for any performance-built Chrysler or Dodge, providing the insurance needed to maintain stable fuel pressure and engine safety.

DeatschWerks dry-break fittings are engineered for high-performance fuel and fluid systems where frequent line separation is required. These 6AN male flare quick disconnects allow for immediate decoupling without fluid loss or air ingestion, maintaining system pressure and cleanliness during maintenance or component swaps. This pair is ideal for motorsports applications requiring rapid serviceability without the need for draining the system.

• Dry-Break Performance: Internal valves seal upon disconnection to prevent fluid spill and stop air from entering the lines.
• Durable Construction: Precision-machined aluminum with a matte black anodized finish for corrosion resistance and long-term durability.
• Specifications: 6AN Male Flare interface on both ends of the quick-disconnect assembly.
• Package Contents: Includes two (2) complete dry break fitting assemblies.
• Manufacturer Part Number: 6-02-0225-B

The DeatschWerks DWFFR-X 70mm Billet Fuel Filter Regulator simplifies your fuel system plumbing by integrating high-efficiency filtration and precise pressure regulation into a single, compact billet aluminum housing. This 2-in-1 design reduces the number of fittings and potential leak points in your fuel line, making it an ideal choice for high-performance builds where space and reliability are paramount.

Constructed from CNC-machined billet aluminum, this unit is built to withstand the rigors of high-pressure fuel systems. It comes equipped with a 10-micron internal filter element, providing the fine filtration necessary to protect sensitive high-flow fuel injectors from microscopic contaminants. Whether you are upgrading a street car or plumbing a dedicated track vehicle, the DWFFR-X offers the flow capacity and protection required for modern EFI systems.

• 70mm billet aluminum housing for maximum durability and weight savings
• 10-micron filter element ensures injector-safe fuel delivery
• Integrated regulator design simplifies fuel system architecture
• Compatible with a wide range of fuels
• Manufacturer Part Number: 8-FFR-070-010K

The DeatschWerks X2 Series Fuel Pump Module provides a high-flow, drop-in solution for owners of high-horsepower Subaru vehicles. Engineered to replace the factory unit, this module houses dual DW420 fuel pumps to support significantly higher power levels than a single pump while maintaining reliable fitment and operation. Fits select 2005-2021 Subaru Forester, Impreza WRX/STI, Legacy, Outback, and WRX STI.

By utilizing the X2 Series architecture, this module allows for a dual-pump configuration within the tight constraints of the factory tank opening. The DW420 pumps are known for their quiet operation and ethanol compatibility, making this an ideal choice for street-driven or track-ready EJ and FA series platforms requiring consistent fuel delivery under high load.

• Dual DW420 high-flow fuel pumps included
• Application-specific design for drop-in fitment
• Retains factory fuel level sender and tank integration
• Compatible with pump gas and E85
• Manufacturer Part Number: 9-421-7050

Fits select 2004-2018 Pontiac GTO, Subaru Impreza WRX/STI, WRX STI, and Legacy models. This high-flow fuel system solution is designed to meet the demands of high-performance applications while maintaining a compact footprint for easier installation.

The DeatschWerks DW300C (MPN 9-309-1008) is a compact "C" series in-tank fuel pump that delivers 340lph of flow. Its reduced dimensions allow it to fit into modern OE fuel pump modules where standard full-sized pumps often require significant modification. This pump is compatible with pump gas and E85, featuring carbon commutators for long-term reliability in demanding environments.

• Flow Rate: 340lph at 40psi
• Compact 65mm body for drop-in fitment in late-model modules
• Compatible with pump gas and Ethanol/E85
• Internal check valve
• Includes application-specific setup kit and mounting clips

Kit Includes: DW300C fuel pump, fuel strainer, electrical harness, and mounting clips for a secure installation.

Fits select 2006-2015 BMW 1 Series, 3 Series, and X1 (135i, 328i, 335i, M3, sDrive28i, xDrive35i).

The DeatschWerks X2 Series Dual Pump Module is a high-performance fueling solution designed for BMW owners pushing the limits of the factory fuel system. This module replaces the restrictive OE unit with a high-flow dual-pump configuration, capable of supporting the significantly higher fuel demands required for forced induction or E85 applications. By utilizing two DW430 pumps, this system ensures consistent pressure and volume even under high-load racing conditions.

Constructed for durability and precision fitment, this module integrates directly into the factory fuel tank. It provides a clean, reliable way to run a dual-pump setup without the need for custom fabrication or external surge tanks. The DW430 pumps are specifically chosen for their balance of high-flow performance and long-term reliability in specialized fuel environments.

• Manufacturer Part Number: 9-437-7071
• Dual DW430 fuel pumps included for maximum delivery
• X2 Series module designed for drop-in chassis compatibility
• Optimized for high-horsepower N54, N55, and S65 builds
• Maintains factory fuel level sender functionality

The DeatschWerks DW400 Fuel Pump Module is a high-performance fueling solution designed to support increased power levels on modern Mopar platforms. This drop-in module replaces the factory assembly to provide the flow required for forced induction or high-output naturally aspirated builds without sacrificing the reliability of your fuel system components.

Fits select 2005-2022 Chrysler 300, Dodge Challenger, Dodge Charger, and Dodge Magnum (6.2L).

• Direct-fit module assembly for simplified installation into the factory fuel tank
• Equipped with the high-flow DW400 series fuel pump
• Maintains original equipment fuel level sender and venturi functionality
• Compatible with pump gas and race fuels to suit various performance applications
• Engineered for high-horsepower street and track use
• Manufacturer Part Number: 9-411-7061

Fits select 2006-2015 BMW 1 Series, 3 Series, and X1 models (including 135i, 328i, 335i, M3, and sDrive/xDrive trims).

The DeatschWerks X2 Series Dual Pump Module is a high-performance fueling solution engineered for enthusiasts pushing the limits of their E8X, E9X, and E84 platforms. This module (MPN: 9-000-7071) allows for the seamless integration of a dual high-flow fuel pump setup into the factory fuel tank, providing the volume necessary for high-boost forced induction or E85 ethanol-tuned applications where the OE single-pump unit falls short.

• Manufacturer Part Number: 9-000-7071
• Series: X2 Dual Pump Module
• Compatibility: Designed for factory fuel tank mounting and integration
• Capability: Dual-pump configuration to support high-horsepower demands

Vehicle Fitment:

• 2011-2013 BMW 1 Series M, 135i, 135is
• 2006-2013 BMW 325i, 328i, 328i xDrive, 330i, 330xi
• 2007-2013 BMW 335i, 335i xDrive, 335is
• 2008-2013 BMW M3
• 2012-2015 BMW X1 (sDrive28i, xDrive28i, xDrive35i)

Fits 2007-2015 Toyota Tundra, Sequoia, and Land Cruiser models. This set of eight DeatschWerks 650cc fuel injectors provides a high-flow, drop-in solution for owners seeking to increase fuel delivery for performance-tuned applications. Engineered to replace factory units without the need for complex wiring adapters or fuel rail modifications, these injectors ensure precise fitment and reliable performance.

Every DeatschWerks injector undergoes rigorous quality assurance testing at their 36,000sf Oklahoma City facility to maintain high standards of flow matching and balancing. Whether you are running forced induction or high-output naturally aspirated setups, these injectors offer the consistency required for stable tuning and engine safety.

• Manufacturer Part Number: 21TTX-00-0650-8
• Flow Rate: 650cc/min
• Quantity: Matched set of 8 injectors
• Fitment Type: Drop-in replacement for factory fuel rails
• Quality assurance and flow-matching performed in-house by DeatschWerks

Fits 2015-2024 Ford F-150 models including Raptor, Tremor, Lariat, and King Ranch trims.

The DeatschWerks DW400 Performance Module (9-437-7233) is a complete, drop-in fuel system solution designed for high-output 2015-2024 Ford F-150 builds. By replacing the restrictive factory module with this high-flow unit, you ensure your engine has the fuel volume necessary for forced induction, aggressive tuning, or E85 conversions. This module is engineered to fit directly into the OE fuel tank, maintaining factory-level reliability and fitment while significantly increasing flow capacity.

• Drop-in replacement for factory fuel pump module
• High-flow capacity supporting 400+ LPH
• Full E85 compatibility for ethanol-blended performance applications
• Maintains factory bucket functionality to prevent fuel starvation
• Designed for seamless integration with Ford F-150 fuel tank geometry
• Manufacturer Part Number: 9-437-7233

The DeatschWerks 100-micron universal fuel pump pre-filter is a critical component for protecting high-performance fuel pumps from debris and large contaminants. Engineered for placement before the fuel pump, this pre-filter acts as the primary line of defense to prevent internal pump damage and maintain fuel system reliability.

Built with durability in mind, the unit features a high-grade stainless steel housing and a reusable stainless steel mesh element, ensuring compatibility with various fuel types including gasoline and ethanol blends. The integrated 8AN fittings provide a secure, high-flow connection suitable for custom performance fuel plumbing.

• Manufacturer Part Number: 8-01-08100
• Filtration Rating: 100 Micron
• Inlet/Outlet Size: -8AN
• Housing Material: Stainless Steel
• Element Material: Stainless Steel Mesh
• Application: Universal Fuel Systems

This DeatschWerks tee fitting is engineered for high-performance plumbing, providing a reliable solution for splitting or merging fluid lines in fuel, oil, or coolant systems. Precision-machined to ensure a secure, leak-free seal, it features 6AN male flares on all three ports for a consistent flow path.

Constructed from lightweight, high-grade aluminum, the fitting is finished with a matte black anodized coating. This protective finish provides a professional aesthetic while ensuring long-term resistance to oxidation and harsh automotive chemicals.

• Manufacturer Part Number: 6-02-0721-B
• Fitting Type: Tee Fitting
• Connection: 6AN Male Flare (all ports)
• Material: Aluminum
• Finish: Anodized Matte Black
• Application: Suitable for fuel, oil, and coolant systems