Fits select 1978-1997 Ford F-250 and F-350 4WD trucks.

Restore front-end ride height and increase ground clearance with the Superlift Front Add-a-Leaf kit. These leaves are designed to integrate into your vehicle's factory leaf packs, providing an additional 1 to 2 inches of lift. This is an effective solution for leveling the stance of your Ford F-Series truck or compensating for sagging front springs due to age or heavy accessories like winches and snow plows.

Engineered by off-road enthusiasts to maintain a balance between on-road comfort and off-road durability, this kit includes the necessary hardware to ensure a secure installation into the existing spring assembly.

• Provides 1 in. to 2 in. of front suspension lift
• Designed for 4WD Ford F-250 and F-350 models
• Integrates with factory front leaf spring packs
• Includes high-strength center pins for installation
• Manufacturer Part Number: 2049
• Covered by a Limited Lifetime Warranty

Includes: Pair of front add-a-leafs and center pins.

Fits select 1973-1987 Chevrolet and GMC C/K series pickups, Suburbans, Blazers, and Jimmies.

Engineered for extreme clearance and durability, the Superlift 12-inch front leaf spring is designed to provide the massive lift height required for oversized tires and off-road capability. This heavy-duty spring replaces the factory unit, utilizing a multi-leaf design to maintain structural integrity and consistent arch under the stress of a high-clearance suspension lift. Whether you are restoring a classic Squarebody or building a dedicated mud truck, this spring delivers the specific rate needed for a level, aggressive stance.

• Lift Height: 12 Inches
• Position: Front
• Sold Individually (two required for complete front axle installation)
• Manufacturer Part Number: 01-312
• Application: Heavy Duty Leaf Spring Suspension
• Compatible with 1973-1987 GM full-size 4WD platforms

Fits 2005-2022 Toyota Tacoma models, including Base, Pre Runner, X-Runner, SR, SR5, Limited, TRD Sport, TRD Off-Road, and TRD Pro.

This Superlift steering knuckle component box is a critical foundation for 4.5-inch to 6-inch suspension lift systems. Designed to replace factory units, these knuckles provide the necessary spindle height to maintain correct steering geometry and alignment specs when running a significant lift. This ensures your truck handles predictably on the street while providing the clearance needed for aggressive off-road tire and wheel packages.

Built to handle the increased leverage of larger tires, these heavy-duty knuckles are engineered for durability across both daily driving and technical trail use. This component box (MPN 8412) is specifically developed for the 2005-2022 Tacoma platform to ensure a precise fit with existing suspension mounting points.

• Includes heavy-duty driver and passenger side replacement steering knuckles
• Designed specifically for 4.5-inch to 6-inch lift heights
• Maintains factory-style steering geometry and alignment capability
• Durable finish for corrosion resistance in harsh environments
• Manufacturer Part Number: 8412

Fits 2005-2022 Ford F-250 and F-350 Super Duty 4WD (King Ranch, Lariat, Limited, Platinum, XL, XLT, FX4, Cabela's, Harley-Davidson Edition).

The Superlift Dual Steering Stabilizer Kit (MPN 92743) is engineered to improve the steering control and handling of your Ford Super Duty. By adding horizontal resistance to the steering linkage, this dual-cylinder system effectively dampens the harsh feedback often felt through the steering wheel when navigating uneven roads or off-road trails. This kit significantly reduces steering wheel kickback and corrects bump steer, making it an essential upgrade for trucks equipped with larger tires.

Equipped with premium Fox 2.0 Performance Series shocks, this setup offers superior dampening compared to factory single-stabilizer units. The system is specifically designed to work with stock-height vehicles, requiring no suspension lift for installation. The heavy-duty brackets and high-quality hardware ensure a secure fit to factory mounting points for long-term durability.

• Includes two premium Fox 2.0 Performance Series shocks for maximum dampening
• No lift required for installation; compatible with stock to lifted height vehicles
• Corrects bump steer and reduces steering wheel vibration and kick
• Improves steering feel and provides better control on and off-road
• Heavy-duty mounting brackets and all necessary hardware included
• Manufacturer Part Number: 92743

Fits 2020-2025 Jeep Gladiator (Sport, Sport S, Rubicon, Overland, Mojave, and more) 4WD models.

Elevate your Jeep Gladiator's off-road capability and stance with the Superlift 4-inch dual-rate coil lift kit. This suspension system is engineered to provide a level of ride quality that excels on the pavement while offering the articulation and durability required for technical trails. By utilizing dual-rate coil springs, this kit maintains a comfortable initial spring rate for daily driving and transitions to a higher rate when compressed to handle aggressive terrain and heavy loads.

This comprehensive kit includes Fox 2.0 Reservoir shocks, designed for superior heat dissipation and consistent damping performance under heavy use. To ensure proper suspension geometry and axle alignment at this lift height, the system features a front adjustable track bar and replacement rear upper control arms. This setup provides enough clearance to comfortably run 37-inch tires, transforming your Gladiator into a formidable overlanding or rock-crawling machine.

• Manufacturer Part Number: K196FX
• Includes front and rear dual-rate coil springs
• Includes four Fox 2.0 Reservoir shocks for maximum fade resistance
• Front adjustable track bar centers the axle under the vehicle
• Replacement rear upper control arms correct pinion angle
• Includes shock relocation brackets and all necessary hardware
• Provides clearance for up to 37-inch tires
• Made in the USA

Fits select 1973-2025 Chevrolet, GMC, Dodge, Ford, and Ram trucks (see fitment table for specific models).

The Superlift 95030 Dual Steering Stabilizer Cylinder Replacement Kit is engineered to restore and enhance steering control on heavy-duty trucks and SUVs. Specifically designed as a performance upgrade or replacement for existing dual stabilizer setups, this kit utilizes premium Bilstein 5100 series cylinders to effectively combat tire shimmy and front-end vibrations often caused by oversized tires and demanding off-road terrain.

Each cylinder features a gas-pressurized design to provide maximum dampening and consistent performance, even under extreme conditions. By stabilizing the steering linkage, this kit reduces wear on steering components and provides a more controlled, comfortable driving experience both on and off the road.

• Premium Damping: Includes a pair of Bilstein 5100 series gas-pressurized stabilizer cylinders.
• Ride Quality: Minimizes tire shimmy and steering wheel kickback.
• Complete Set: Includes two cylinders, black protective boots, and durable bushings.
• Manufacturer Part Number: 95030

Fits select 1986-2003 Suzuki Esteem, Grand Vitara, and Samurai.

Improve your vehicle's handling and steering response with the Superlift Dual Steering Stabilizer Kit. Engineered to resolve common steering issues such as bump steer and steering wheel kick, this kit provides a more controlled, centered feel during both highway driving and technical off-road excursions. Featuring specifically tuned FOX 2.0 stabilizer cylinders, this setup delivers maximum dampening to handle rough terrain and provide a stable, precise steering feel.

• Includes specifically tuned FOX 2.0 Performance Series stabilizer cylinders
• Reduces steering wheel kick and corrects bump steer
• Heavy-duty (HD) stabilizer brackets and mounting hardware included
• Bolt-on installation with no lift required
• Provides a more controlled and stable steering feel
• Manufacturer Part Number: 92766

Fits 2005-2022 Ford F-250 and F-350 Super Duty 4WD models.

The Superlift 92742 Dual Steering Stabilizer Kit is engineered to enhance the handling and control of your heavy-duty Ford truck by neutralizing road vibrations and steering wheel kick, commonly known as bump steer. This kit features two high-performance Bilstein gas-pressurized dampers mounted to heavy-duty brackets, providing maximum dampening and a more planted steering feel. Specifically designed for vehicles at factory ride height, this kit requires no lift for installation and uses existing mounting points where possible.

• Corrects bump steer and steering wheel kick for a more stable driving experience
• Equipped with premium Bilstein dampers for superior heat dissipation and control
• Designed specifically for stock-height vehicles with no lift required
• Includes all heavy-duty mounting brackets and necessary hardware for a complete installation
• Reduces wear on steering components by absorbing road shock and vibration
• Manufacturer Part Number: 92742

Fits 2005-2022 Ford F-250 and F-350 Super Duty 4WD models across all trims including XL, XLT, Lariat, King Ranch, Platinum, and Limited.

Enhance your truck's handling and steering control with the Superlift Dual Steering Stabilizer Kit. Engineered to combat the common issues associated with heavy-duty solid axle front ends, this kit significantly reduces bump steer and steering wheel kick. Unlike many performance steering upgrades, this system is specifically designed to work on stock-height vehicles, requiring no suspension lift for installation.

By adding a second stabilizer shock, this kit provides maximum dampening to neutralize vibrations and shimmy, resulting in a more controlled, centered steering feel whether you are on the highway or navigating off-road terrain. The system utilizes heavy-duty brackets and high-quality Superlift shocks to ensure long-lasting durability under demanding conditions.

• Replaces or supplements the factory steering stabilizer for improved dampening
• Corrects bump steer and minimizes steering wheel feedback
• No lift required; compatible with stock-height 4WD trucks
• Includes all necessary mounting brackets and hardware for a complete installation
• Feature Superlift series shocks for consistent performance
• Manufacturer Part Number: 92741

Fits select 2005-2022 Ford F-250 and F-350 Super Duty models.

This Superlift Dual Steering Stabilizer Kit is designed to improve handling and steering control by dampening the lateral forces that cause tire shimmy and steering wheel kickback. This setup is essential for trucks running oversized tires or off-road wheel packages, as it helps maintain stability and reduces wear on steering components by absorbing road shock and vibration.

The kit includes a pair of Fox 2.0 Performance Series shocks, featuring 2.0-inch impact-extruded 6061-T6 aluminum bodies for superior heat dissipation and rust resistance. The internal high-flow piston and 5/8-inch hard chrome-plated shaft provide consistent, race-developed damping performance in both on-road and demanding off-road conditions.

• 2.0-inch impact-extruded and CNC-machined 6061-T6 clear-anodized aluminum one-piece body
• 5/8-inch hard chrome-plated, heat-treated alloy steel shaft
• Race-developed high-flow piston design for consistent valving
• Clear-anodized finish for long-term durability and corrosion resistance
• Includes all heavy-duty mounting brackets and hardware required for installation
• Manufacturer Part Number: 92722

Fits 1999-2004 Ford F-250 and F-350 Super Duty 4WD models.

Improve steering control and reduce front-end shimmy with the Superlift Dual Steering Stabilizer Kit. This system is specifically engineered for Ford Super Duty trucks running oversized tires, helping to dampen the kickback and vibration caused by road irregularities and larger rotating masses. By mounting two stabilizers side-by-side, this kit provides the additional damping force required to maintain a centered, stable steering feel both on and off-road.

The kit features premium Bilstein 5100 Series cylinders, which utilize a high-pressure gas charge to provide consistent performance without fading. These monotube shocks are paired with application-specific brackets for a secure fit to your F-250 or F-350's axle and steering linkage.

• Includes a pair of Bilstein 5100 series gas-pressurized stabilizer cylinders
• Reduces bump steer and steering wheel vibration
• Includes heavy-duty mounting brackets and all necessary hardware
• Includes protective black shock boots to shield piston rods from debris
• Direct-fit design for 4WD Ford Super Duty applications
• Manufacturer Part Number: 92710

Fits 2003-2013 Dodge/Ram 2500 and 2003-2012 Dodge/Ram 3500 equipped with 4 to 6 inches of suspension lift.

Superlift Bullet Proof brake hoses are engineered to eliminate the spongy pedal feel common in lifted trucks with stock rubber lines. These extended-length hoses provide the necessary slack for 4-6 inch lift kits while ensuring maximum pressure capacity and durability under heavy off-road or towing conditions. The multi-layer construction prevents hose expansion, providing a firmer, more responsive braking experience.

• Stainless steel braided exterior for superior abrasion and corrosion resistance
• Internal Kevlar bladder adds structural integrity and prevents volumetric expansion
• Extended length specifically designed for vehicles with 4" to 6" lift heights
• Includes new crush washers for a leak-free installation
• Sold as a pair (front or rear application depending on OE configuration)
• Manufacturer Part Number: 91600

Fits 2005-2007 Ford F-250 and F-350 Super Duty models with 4-8 inches of suspension lift.

Superlift Bullet Proof brake hoses are engineered to replace factory rubber lines that are often too short or prone to expansion on lifted applications. These stainless steel braided hoses provide a firmer pedal feel and improved braking response by eliminating the volumetric expansion found in original equipment lines under heavy braking pressure.

Constructed with a heavy-duty Kevlar inner bladder for superior strength and durability, these hoses are designed to withstand the rigors of off-road use while providing the necessary length for 4 to 8 inches of lift height. This kit (MPN: 91520) comes as a pair and includes the necessary hardware for a secure, leak-free installation.

• Firmly braided stainless steel exterior prevents hose expansion for consistent pedal feel
• Internal Kevlar bladder for maximum pressure resistance and long-term durability
• Extended length specifically optimized for trucks with 4-8 inch lift kits
• Includes new crush washers for a complete installation
• Sold as a pair (Left and Right)
• Manufacturer Part Number: 91520

Fits 2004-2024 Ford F-150 models (including FX4, Raptor, Tremor, and King Ranch) equipped with a 4.5-inch to 6-inch suspension lift.

This Superlift Bilstein Shock Box provides a significant damping upgrade for your lifted Ford F-150. These Bilstein 5100 series shock absorbers are specifically valved for vehicles with increased ride heights, ensuring controlled handling and improved ride quality whether you are navigating highway commutes or technical off-road trails. The gas-pressurized monotube design allows for rapid heat dissipation and consistent performance under demanding conditions.

• Manufacturer Part Number: 84058
• Designed specifically for 4.5-inch to 6-inch lift heights
• Includes two (2) Bilstein 5100 Series shock absorbers
• Gas-pressurized monotube construction for superior fade resistance
• Direct-fit replacement for components within Superlift suspension systems
• 1-Year Shock Warranty included

Fits 2024-2025 Toyota Tacoma 4WD models, including SR, SR5, TRD Sport, TRD Off-Road, Limited, Trailhunter, and TRD Pro.

The Superlift 2-inch leveling kit is engineered to eliminate the factory rake of the 2024-2025 Toyota Tacoma, providing a level stance and an aggressive profile. This front-end lift creates the necessary clearance for oversized wheel and tire combinations while maintaining the vehicle's factory ride quality. Designed and manufactured by off-road enthusiasts in West Monroe, Louisiana, this kit is built to withstand both daily driving and trail use with a focus on simple, bolt-on installation.

• Provides 2 inches of front lift to level the vehicle's stance
• Allows for the installation of oversized wheels and tires
• Maintains factory ride characteristics and suspension geometry
• High-grade mounting hardware included for a complete installation
• Proudly manufactured in the USA (West Monroe, LA)
• Manufacturer Part Number: 40055

Fits select 2023-2025 Chevrolet Colorado and GMC Canyon 4WD models (Note: Will NOT fit Chevrolet Colorado ZR2 models). This 1-inch front leveling kit from Superlift provides a clean, level stance by raising the front end of your truck to match the rear height. This additional clearance allows for the installation of oversized wheels and tires without compromising factory ride quality.

Engineered and manufactured in West Monroe, Louisiana, this kit is designed for a fast and straightforward installation process. As a pioneer in suspension technology, Superlift ensures these components are built to handle both daily commuting and off-road environments with precision and durability.

• Lifts the front of the truck 1-inch for a level appearance
• Accommodates larger aftermarket wheel and tire combinations
• Includes all necessary mounting hardware for a complete installation
• Manufacturer Part Number: 40054
• Made in the USA

Vehicle Fitment:

• 2023-2025 Chevrolet Colorado (LT, Trail Boss, WT, Z71)
• 2023-2025 GMC Canyon (AT4, Denali, Elevation)
• 2023-2024 GMC Canyon AT4X

Fits select 2023-2025 Chevrolet Colorado and GMC Canyon 4WD models (Excluding ZR2).

Eliminate the factory rake of your mid-size GM truck with the Superlift 2-inch front leveling kit. This bolt-on suspension solution provides the necessary front-end lift to achieve a level stance, allowing for the installation of oversized wheels and tires without compromising factory ride quality. Designed specifically for 2023-2025 4WD models, this kit is engineered for a precise fit and long-term durability on-road or off.

• Lifts the front of the vehicle 2 inches for a level, aggressive profile
• Provides clearance for larger aftermarket wheel and tire combinations
• Simple bolt-on installation requires no major modifications
• Complete kit includes all necessary high-grade mounting hardware
• Manufactured in the USA (West Monroe, LA)
• Manufacturer Part Number: 40053

Note: This kit is designed for 4WD models only and will not fit ZR2 trim levels.

Fits 2024 Ford Ranger XL, XLT, and Lariat models.

Correct the factory nose-down rake and improve your truck's stance with the Superlift 2.5-inch leveling kit. This front strut spacer kit is engineered to provide additional lift for larger wheel and tire packages while maintaining the truck's original ride characteristics. The precision-engineered spacers bolt directly to the factory strut assemblies, offering a clean, integrated fit that requires no permanent modifications to your suspension.

• Provides 2.5 inches of front lift to level the vehicle profile
• Specifically designed for the 2024 Ford Ranger (XL, XLT, Lariat)
• Easy 100% bolt-on installation with no strut disassembly required
• Maintains factory ride quality and handling performance
• Manufacturer Part Number: 40032
• Includes Superlift Limited Lifetime Warranty and Lift Force Warranty

Fits 2013-2025 Ram 3500 and 2014-2025 Ram 2500 4WD trucks across all trim levels including Power Wagon, Rebel, and Tradesman.

Achieve a level, aggressive stance for your Ram heavy-duty truck with the Superlift 2.5-inch front leveling kit. Designed by off-road enthusiasts to address the factory nose-down rake, this kit provides additional clearance for larger tires while maintaining the vehicle's original ride quality. By utilizing upper coil spring spacers, this system preserves the factory coil springs and suspension geometry.

The included shock extension brackets allow you to retain your factory-length shocks, ensuring that suspension travel remains within OE specifications. This is a bolt-on solution that requires no permanent modifications to your vehicle. Manufactured under strict tolerances for a precise fit and long-term durability on-road and off.

• 2.5-inch front lift height to level the vehicle profile
• Heavy-duty upper coil spring spacers
• Front shock extension brackets to maintain factory shock travel
• Includes all necessary high-grade mounting hardware
• Manufacturer Part Number: 40023
• Backed by Superlift's Limited Lifetime Warranty

Fits select 2022-2025 Toyota Tundra models (SR, SR5, Limited, Platinum, 1794 Edition, and Capstone) in both 2WD and 4WD configurations.

Correct your vehicle's stance with the Superlift 2-inch leveling kit. This kit utilizes heavy-duty upper strut spacers to eliminate the factory nose-down rake, providing a level profile and additional clearance for larger tire and wheel combinations. Designed specifically for the redesigned Toyota Tundra chassis, this system maintains factory ride quality and suspension geometry by mounting directly to the top of the factory strut assemblies.

• Lift Height: 2.0 inches
• Position: Front leveling
• Installation: Bolt-on upper strut spacers
• Maintains factory ride quality and handling characteristics
• Accommodates larger tires and improves ground clearance
• Includes all necessary mounting hardware
• Manufacturer Part Number: 40018
• Backed by a Limited Lifetime Warranty

Fits select 1996-2010 Ford Ranger, Explorer, Explorer Sport, and Explorer Sport Trac models equipped with a 4-inch suspension lift.

Maintain proper suspension geometry and predictable handling on your lifted Ford with these Superlift front sway bar links. When installing a 4-inch lift kit, the factory sway bar links are typically too short, causing the sway bar to sit at an aggressive angle that can bind or limit articulation. These extended links restore the sway bar to its optimal operating position, reducing body roll and improving overall stability on and off-road.

Designed for durability and precise fitment, these links are engineered by truck enthusiasts to ensure your suspension performs as intended. The kit comes complete with high-quality bushings and sleeves to replace worn OE components during installation.

• Specifically designed for vehicles with a 4-inch lift kit
• Restores correct sway bar alignment and operating angles
• Improves vehicle stability and reduces suspension binding
• Includes pair of front sway bar links, bushings, and sleeves
• Complete with all necessary mounting hardware
• Manufacturer Part Number: 30-9630

Fits 1994-2002 Dodge Ram 2500 and 3500 Base models.

Level and lift your heavy-duty truck with this pair of Superlift front coil springs, designed to provide a full 5 inches of suspension lift. These springs are engineered specifically for the 1994-2002 Dodge Ram platform, utilizing engine-specific coil rates to ensure your truck maintains a controlled, comfortable ride while accommodating larger wheel and tire packages. Whether you are navigating rough terrain or handling daily hauls, these coils prevent sagging and provide the durability required for 4x4 applications.

• Provides a 5-inch front suspension lift
• Engine-specific coil rates for optimized load handling and ride quality
• Direct-fit replacement for OEM front coil springs
• High-quality construction designed to resist settling and fatigue
• Sold as a pair for a complete front axle upgrade
• Manufacturer Part Number: 146

Fits select 1966-1979 Ford Bronco and F-150 4WD models. This Superlift Drop Radius Arm Bracket Kit (MPN: 1275) is designed to restore proper front-end geometry on lifted vehicles.

When installing a lift kit on classic Ford trucks with a radius arm front suspension, the change in angle can drastically reduce caster, leading to wander and poor steering return-to-center. This kit lowers the radius arm frame mounting points by 2.75 inches, effectively rotating the axle back toward its factory caster setting to improve tracking and drivability on-road and off.

• Caster Correction: Specifically engineered to realign steering geometry for better handling.
• Precision Fit: Designed to work with Ford's radius arm suspension found on classic Bronco and F-150 chassis.
• Included Hardware: Includes the brackets required to lower the frame mounts.
• Specifications: 2.75-inch drop height; MPN 1275.

Fits 1984-2001 Jeep Cherokee XJ and 1986-1992 Jeep Comanche MJ.

These Superlift front coil springs provide a 3-inch lift for your Jeep, engineered to balance off-road capability with consistent on-road handling. Designed by suspension specialists who understand the demands of trail use, these springs feature engine-specific coil rates to ensure the correct ride height and suspension frequency for your specific vehicle configuration.

Sold as a pair, these springs are a primary component for increasing ground clearance and allowing for larger tire fitment. They are manufactured to resist sagging and maintain their spring rate through years of cycling, making them a reliable upgrade for both daily-driven and trail-focused Jeeps.

• Lift Height: 3.0 inches
• Position: Front
• Coil Rate: Engine-specific tuning
• Quantity: Pair (2 springs)
• Manufacturer Part Number: 126

Secure your vehicle's leaf springs and axle assembly with this Superlift high-strength square U-bolt kit. Designed for heavy-duty suspension applications, these U-bolts provide the critical clamping force necessary to maintain axle alignment and suspension stability, especially on lifted trucks and SUVs. Each bolt is manufactured from high-grade steel to resist stretching and ensure consistent torque retention under load.

• Manufacturer Part Number: 11884
• Diameter: 5/8 inch
• Width: 3-1/4 inches
• Length: 16 inches
• Bend Type: Square
• Construction: High-strength steel
• Hardware Included: Four (4) U-bolts, eight (8) nuts, and eight (8) washers

Properly torqued U-bolts are essential for suspension safety and preventing axle wrap. This 4-pack includes all necessary grade-matched nuts and washers for a complete installation or to replace worn-out factory hardware during a lift kit installation.

Fits select 1980-1997 Ford F-150, F-250, F-350, Bronco, Bronco II, Explorer, Ranger, and Mazda B-Series/Navajo models equipped with power steering.

When installing a 4-inch to 6-inch suspension lift on your Ford truck or SUV, the increased height creates steep angles for the steering linkage. This Superlift Dropped Pitman Arm (MPN 1109) is engineered to correct these steering geometry issues by lowering the drag link attachment point. This restoration of proper alignment helps eliminate bump steer and ensures your vehicle maintains predictable handling characteristics both on and off the road.

Designed specifically for models with factory power steering, this heavy-duty component replaces the OE pitman arm to ensure your steering gearbox and linkage operate within their intended range of motion.

• Correction: Designed for vehicles with 4-inch to 6-inch suspension lifts
• Compatibility: Fits models with power steering only
• Function: Restores drag link alignment and corrects steering angles
• Manufacturer Part Number: 1109
• Warranty: Covered by a Limited Lifetime Warranty

Includes: One dropped pitman arm and necessary hardware for installation.

Fits 1978-1979 Ford F-150 and Bronco models with power steering.

When installing a lift kit between 4 and 9 inches on your classic Ford truck or Bronco, the factory steering geometry is significantly compromised. This Superlift dropped pitman arm (MPN 1104) is engineered to restore the proper drag link angle, reducing bump steer and ensuring your steering linkage operates within its intended range of motion. This is a critical component for maintaining predictable handling and steering response on vehicles with significant suspension height increases.

• Corrects steering angles for vehicles with 4-inch to 9-inch lifts
• Designed specifically for models equipped with factory power steering
• Restores proper drag link geometry to improve on-road and off-road handling
• Includes one drop pitman arm for a straightforward bolt-on installation
• Manufacturer Part Number: 1104
• Covered by a Limited Lifetime Warranty

Fits 1980-1996 Ford F-150 and Bronco models equipped with a 4-inch to 6-inch suspension lift.

The Superlift Superrunner steering system (MPN 1026) is engineered to solve the inherent geometry issues found in lifted Ford Twin Traction Beam (TTB) front ends. By converting the factory "Y-style" steering linkage to a more sophisticated idler arm and centerlink design, this system synchronizes the phasing between the tie rods and the axle pivots. This results in significantly reduced bump steer, improved tracking, and more consistent tire wear on lifted applications.

• Replaces factory steering with a high-performance idler arm and centerlink configuration
• Optimized for vehicles with 4" to 6" of suspension lift
• Improves steering geometry and reduces bump steer for better on-road handling
• Manufacturer Part Number: 1026
• Covered by a Limited Lifetime Warranty

Includes: Centerlink, idler arm bracket, idler arm, inner and outer tie rod ends, and all necessary Grade 8 installation hardware.