This Part Fits:

Fits Honda B-series, D-series, F-series, and H-series engines.

The Radium Engineering Fuel Rail Plumbing Kit provides a streamlined solution for connecting a Radium fuel rail to the factory fuel system. This kit (20-1270-PK) includes all the necessary hoses and adapter fittings required to bridge the gap between the fuel rail and the OEM chassis lines in the engine bay. It eliminates the need for custom-fabricated lines and ensures a secure, leak-free connection when upgrading your Honda's fuel delivery system.

• Directly connects Radium fuel rails to factory fuel system lines
• Includes all necessary pre-assembled hoses and adapter fittings
• Compatible with Honda B, D, F, and H-Series engine configurations
• Maintains factory fuel system routing for a clean engine bay installation
• Manufacturer Part Number: 20-1270-PK

Fits 1992-2001 Mitsubishi Evolution I, II, III, IV, V, and VI.

This Radium Engineering fuel hanger plumbing kit is a comprehensive solution designed to connect a Radium fuel pump hanger to the engine bay. Engineered specifically for use with the Radium 4G63 fuel rail, this kit replaces restrictive factory fuel lines with high-flow plumbing to support increased fueling demands. The system includes a high-performance fuel pressure regulator and a stainless steel element fuel filter, ensuring consistent pressure and clean fuel delivery for both gasoline and ethanol-based fuels.

• Direct-fit plumbing for Radium fuel pump hangers in Evo 1-6 chassis
• Optimized for integration with Radium Engineering 4G63 top-feed fuel rails
• Includes high-flow stainless steel fuel filter compatible with E85
• Comes with fuel pressure regulator and all necessary AN fittings
• Supplied with pre-assembled hoses and mounting hardware for a streamlined installation
• Manufacturer Part Number: 20-1334-03

Fits select 1994-2002 Nissan S14, S15, R33, and R34 chassis models.

The Radium Engineering Fuel Hanger Plumbing Kit is a comprehensive solution designed specifically to complement Radium in-tank fuel pump hangers. This kit replaces the restrictive factory fuel lines with high-flow plumbing, ensuring your fuel system can handle the demands of high-performance tuning. By utilizing application-specific brackets and fittings, it provides a clean, professional installation that eliminates the need for custom fabrication.

• Designed for late-model Nissan S-chassis (S14/S15) and R-chassis (R33/R34) vehicles
• Includes a premium fuel filter housing with a reusable stainless steel mesh filter element
• Compatible with all fuel types, including gasoline, E85, and ethanol blends
• Complete kit includes PTFE fuel lines, chassis-specific line brackets, and all required adapter fittings
• Engineered for seamless integration with Radium fuel pump hangers
• Manufacturer Part Number: 20-0702-03

Fits select 1990-2003 BMW 3-Series (E36/E46) models including 318i, 323i, 325i, 328i, and 330i variants. This Radium Engineering plumbing kit provides a direct solution for connecting a Radium in-tank fuel pump hanger to the vehicle's fuel system. By utilizing application-specific fittings and high-quality lines, it eliminates the guesswork involved in custom fuel system fabrication.

The kit features a high-flow inline fuel filter equipped with a durable stainless steel element, designed to provide superior filtration without restricting fuel volume—crucial for high-performance engines and aftermarket fuel pumps. This setup ensures that your fuel delivery system is secure, leak-free, and capable of supporting increased demands.

• Designed specifically for use with Radium Engineering BMW E36 and E46 fuel pump hangers
• Includes a high-capacity fuel filter with a reusable stainless steel filter element
• Comprehensive hardware and plumbing components for a clean installation
• Corrosion-resistant materials for long-term reliability in performance applications
• Manufacturer Part Number: 20-1175-03

Fits 1995-1998 Nissan 240SX Base, LE, and SE models.

The Radium Engineering Fuel Hanger (MPN: 20-0632-00) is a high-performance, drop-in replacement for the factory fuel pump assembly. This hanger is specifically engineered to accommodate modern high-flow fuel pumps while maintaining the functionality of the stock fuel tank and level sender. Designed for high-horsepower applications, it provides the necessary fuel volume for forced induction or tuned naturally aspirated builds.

• Direct drop-in fitment for 1995-1998 Nissan 240SX (S14) chassis.
• Compatible with Walbro F90000267, F90000274, F90000285, or Ti Automotive E5LM pumps.
• CNC-machined construction with an anodized finish for corrosion resistance and E85 compatibility.
• Integrated fuel collector to prevent starvation during high-G cornering or acceleration.
• Manufacturer Part Number: 20-0632-00
• Pumps are not included and must be purchased separately.

Fits 1992-1998 Mitsubishi Lancer Evolution I, II, III, IV, and V.

The Radium Engineering Fuel Hanger Connection Kit is designed to bridge the gap between the Radium 20-1330 in-tank fuel hanger and the vehicle's factory plumbing. This kit provides a clean, reliable solution for enthusiasts upgrading their fuel system who want to retain the OEM chassis feed and return lines.

By utilizing application-specific adapter fittings and pre-cut fuel lines, this kit eliminates the guesswork of custom plumbing, ensuring a leak-free connection and proper fuel flow. Please note that while this kit fits Evolution models I through V, it is not compatible with the Evolution VI.

• Provides a direct connection between Radium 20-1330 fuel hanger and OEM hard lines
• Includes short high-pressure fuel lines
• Includes all necessary adapter fittings for feed and return
• Engineered for E85 and gasoline compatibility
• Manufacturer Part Number: 20-1331

Fits 1993-1997 Honda Civic del Sol S, Si, and VTEC models.

The Radium Engineering fuel pump hanger is a high-performance in-tank solution designed to replace the restrictive factory assembly. This unit allows for the installation of high-flow aftermarket pumps required for forced induction and high-horsepower applications while maintaining precise fitment within the OE fuel tank. The CNC-machined construction ensures a secure seal and robust electrical connections for reliable fuel delivery under demand.

• Designed for 1993-1997 Honda Civic del Sol (S, Si, VTEC)
• Direct compatibility with Walbro F90000267, F90000274, and F90000285 pumps
• Compatible with various brushless fuel pump configurations
• Replaces OEM hanger for improved flow and pump mounting
• CNC machined aluminum construction for durability and ethanol resistance
• Manufacturer Part Number: 20-3792

Note: Fuel pumps are sold separately and are not included with the hanger.

Fits 1991-2005 Acura NSX Base, T, and Alex Zanardi Edition.

The Radium Engineering Fuel Hanger (MPN 20-2792) provides a high-performance in-tank fuel delivery solution for the first-generation Acura NSX. This hanger is specifically engineered to replace the factory unit, allowing for the installation of modern high-flow fuel pumps necessary for high-horsepower builds. It is designed to work seamlessly with both traditional brushed and advanced brushless pump technologies, ensuring stable fuel pressure and volume for demanding applications.

• Specifically designed for the 1991-2005 Acura NSX chassis
• Compatible with Walbro F90000-series pumps (including F90000267, F90000274, and F90000285)
• Engineered to support various brushless fuel pump configurations
• Replaces factory in-tank hanger for improved flow capacity
• Fuel pumps are sold separately
• Manufacturer Part Number: 20-2792

Fits select 2003-2023+ Nissan 350Z and Infiniti G35, G37, Q50, and Q60 models.

The Radium Engineering Fuel Hanger Surge Tank (FHST) is a high-performance drop-in solution designed to eliminate fuel starvation during aggressive cornering, braking, and acceleration. By integrating a dedicated surge tank directly into the fuel hanger assembly, this system ensures the fuel pumps remain submerged even when the main tank level is low or fuel slosh occurs.

• Direct drop-in replacement for the factory fuel pump hanger
• Integrated anti-starvation surge tank maintains a constant fuel supply
• Specifically designed for Ti Automotive (Walbro) "450" style (F90000267, F90000274, F90000285, F90000295) or DeatschWerks DW440 pumps
• CNC machined aluminum construction with corrosion-resistant finishes
• Maintains all factory fuel tank functionality
• Manufacturer Part Number: 20-1832

Note: Fuel pumps are not included and must be purchased separately.

Fits select Nissan 350Z and Infiniti G35, G37, and Q50 models.

The Radium Engineering Fuel Hanger Surge Tank is a technical drop-in replacement for the factory unit, featuring an integrated anti-starvation surge tank. This design ensures the fuel pumps remain submerged during aggressive maneuvers, preventing fuel starvation that can lead to engine damage. Engineered for high-performance applications, it provides a stable fuel supply even under low-tank conditions or high-G cornering.

• Direct drop-in fitment for the factory fuel tank
• Integrated surge tank protects against fuel slosh and starvation
• Configured for Walbro GSS342 or AEM 50-1200 style pumps
• CNC machined aluminum construction for maximum durability
• Manufacturer Part Number: 20-1830

Please note: Fuel pumps are sold separately and are not included with this assembly.

Fits 2009-2020 Nissan 370Z (RHD/LHD).

The Radium Fuel Hanger Surge Tank (MPN: 20-1822) is a drop-in fueling solution designed to eliminate fuel starvation in high-performance Nissan 370Z applications. By integrating an internal surge tank directly into the hanger assembly, this unit ensures a constant supply of fuel to the pumps during aggressive cornering, heavy braking, or low fuel levels.

This assembly is specifically engineered to accommodate high-flow Ti Automotive "450" style pumps, providing the necessary volume for forced induction or high-horsepower naturally aspirated builds. The CNC-machined components replace the restrictive factory plastics with a robust, high-flow architecture.

• Direct drop-in replacement for the factory fuel hanger unit
• Integrated anti-starvation surge tank maintains fuel at the pump inlets
• Specifically designed for Ti Automotive / Walbro F90000267, F90000274, and F90000285 pumps
• Compatible with both Left Hand Drive (LHD) and Right Hand Drive (RHD) chassis
• Precision CNC machined construction with corrosion-resistant hardware
• Manufacturer Part Number: 20-1822

Note: Fuel pumps are not included and must be purchased separately.

Fits 2009-2020 Nissan 370Z models (LHD and RHD).

The Radium Fuel Hanger Surge Tank (MPN 20-1820) is a high-performance, drop-in replacement for the factory fuel hanger, engineered to eliminate engine-threatening fuel starvation. By integrating an anti-starvation surge tank directly into the hanger assembly, this unit ensures a consistent fuel supply to the pumps even during high-lateral G cornering or under low-fuel conditions.

This assembly is specifically designed to accommodate "255" style fuel pumps, including the Walbro GSS342 and AEM 50-1200, as well as other 340LPH pumps with identical physical dimensions. It provides a robust solution for forced induction or high-horsepower naturally aspirated builds requiring reliable fuel delivery.

• Integrated anti-starvation surge tank for consistent fuel delivery
• Direct drop-in fitment for the OE Nissan 370Z fuel tank
• Compatible with Walbro GSS342 and AEM 50-1200 340LPH pumps
• Fits both Left-Hand Drive (LHD) and Right-Hand Drive (RHD) chassis
• Manufacturer Part Number: 20-1820

Note: Fuel pumps are not included and must be purchased separately.

Fits 2011-2025 Ford Mustang (Base, V6, GT, EcoBoost, Boss 302, Bullitt, Mach 1, Shelby GT350/GT500, and Dark Horse).

The Radium Engineering in-tank fuel pump hanger is a precision-engineered fuel delivery upgrade designed to drop directly into the factory fuel tank. This hanger allows for the installation of high-flow aftermarket pumps to support the increased fuel demands of forced induction or high-output builds while preserving the factory fuel level sender and venturi jet pump system for reliable operation and scavenging.

The unit includes an integrated fuel pressure regulator and can be converted for use with a remote regulator in a return-style system using the optional Radium conversion kit (part 20-0806).

• Compatible with Walbro F90000274, Walbro F90000285, or DeatschWerks DW400 fuel pumps
• CNC-machined 6061-T6 aluminum assembly with corrosion-resistant anodized finish
• Retains OEM fuel level sender and tank scavenging functionality
• Includes electrical hardware and installation components
• Fuel pumps NOT included; must be purchased separately
• Manufacturer Part Number: 20-1802

Fits 2011-2024 Ford Mustang models, including V6, EcoBoost, GT, Boss 302, Mach 1, Dark Horse, and Shelby GT350/GT500.

The Radium Engineering 20-1801 Fuel Hanger provides a robust, drop-in solution for upgrading the fuel system on the S197 and S550/S650 Mustang platforms. This hanger is specifically engineered to accommodate TI Automotive E5LM brushless fuel pumps, providing the high-volume flow required for forced induction and high-horsepower builds without the need for custom fuel cell fabrication.

• Precision Engineering: CNC-machined components designed to drop directly into the factory fuel tank.
• Integrated Regulator: Features a fuel pressure regulator integrated into the top hat to maintain OE-style plumbing.
• Bypass Capability: For systems requiring an external regulator, the internal unit can be bypassed using Radium kit 20-0806 (sold separately).
• Pump Compatibility: Specifically designed for TI Automotive Brushless E5LM pumps (pumps are not included and must be purchased separately).
• Manufacturer Part Number: 20-1801

Fits select 1988-1993 Acura Integra and Honda CRX models.

The Radium Engineering 20-1792 in-tank fuel pump hanger is a precision-engineered solution for high-performance fuel delivery. This hanger allows for the drop-in installation of high-flow pumps while ensuring proper electrical and plumbing connections within the fuel tank. It is specifically designed to accommodate modern high-output pumps that often exceed the capacity of factory hangers.

• Engineered for Walbro F90000-series pumps (F90000274 and F90000285).
• Compatible with pumps featuring similar form factors and wiring connectors.
• Supports select brushless fuel pump configurations for advanced fueling requirements.
• Manufacturer Part Number: 20-1792

Vehicle Fitment:

• 1990-1993 Acura Integra (GS, GS-R, LS, RS)
• 1988-1991 Honda CRX (Base, DX, HF, Si)

Fits select 1988-1993 Honda CRX and Acura Integra models (GS, GS-R, LS, RS, DX, HF, Si). This Radium Engineering in-tank fuel hanger (MPN: 20-1790) is a precision-engineered solution for replacing the factory unit to accommodate high-flow aftermarket fuel pumps. It is designed to maintain the factory mounting location while providing the necessary internal clearance and electrical connections for high-performance fueling setups.

This hanger is specifically tailored for 39mm diameter fuel pumps with standard offset inlets. It is compatible with Walbro GSS342G3 and AEM 50-1200 pumps, or other units sharing the same form factor and wiring terminals. The design ensures the pump is securely seated and properly oriented within the fuel tank for reliable pickup under spirited driving conditions.

• Direct replacement for the factory fuel pump hanger
• Machined for high-flow pump compatibility (39mm body diameter)
• Compatible with Walbro GSS342G3 and AEM 50-1200 fuel pumps
• Maintains OEM fuel tank mounting and seal
• Manufacturer Part Number: 20-1790

Authoritative Fitment:

• 1990-1993 Acura Integra (GS, GS-R, LS, RS)
• 1988-1991 Honda CRX (Base, DX, HF, Si)

Fits select 2008-2015 Mitsubishi Lancer Evolution X (GSR, MR, MR Touring, SE, and Final Edition).

The Radium Engineering 20-1642 in-tank fuel hanger is a drop-in solution designed to accommodate high-flow fueling requirements for the Mitsubishi Evolution X. This newly redesigned unit replaces the restrictive factory assembly and can be configured for either single or dual fuel pump setups. Specifically engineered for the Walbro F90000-series (commonly known as the Walbro 450, 525, etc.), this hanger provides a stable, high-current electrical interface and robust plumbing options.

Out of the box, the hanger includes pre-installed fittings that maintain compatibility with factory fuel lines for a straightforward installation. For high-horsepower builds requiring maximum flow, the kit also includes interchangeable fittings for -8AN feed and -6AN return lines. The CNC-machined components are designed to withstand caustic fuels, including E85, while ensuring the pumps remain properly submerged during spirited driving.

• Manufacturer Part Number: 20-1642
• Compatible with Walbro F90000-series pumps (not included)
• Supports single or dual pump configurations
• Includes adapter fittings for OEM fuel lines
• Includes 8AN feed and 6AN return fittings for aftermarket plumbing
• Machined aluminum construction for long-term durability

Fits 2008-2015 Mitsubishi Lancer Evolution X (GSR, MR, MR Touring, SE, and Final Edition).

The Radium Engineering in-tank fuel pump hanger is a precision-engineered solution for the Mitsubishi Evolution X fuel system. Designed to replace the restrictive factory assembly, this newly redesigned hanger allows for the installation of either a single or dual aftermarket fuel pump setup within the OEM fuel tank. This provides the increased flow capacity necessary for high-performance forced induction and E85 applications.

• Compatible with single or dual fuel pump configurations
• Includes pre-installed fittings for direct connection to factory fuel lines
• Includes 8AN ORB feed and 6AN ORB return fittings for high-flow aftermarket hoses
• Billet aluminum construction with corrosion-resistant hardware
• Engineered to maintain proper fuel baffling and scavenging
• Manufacturer Part Number: 20-1640

Fits 1993-2002 Toyota Supra (MK4) all models.

The Radium Engineering Fuel Pump Hanger (20-1512) is a high-performance, drop-in solution designed to replace the restrictive factory unit in the A80 Supra fuel tank. This assembly provides a robust plumbing architecture capable of supporting up to three internal fuel pumps, including brushless configurations, to meet the demands of high-horsepower builds.

• Specifically engineered for Walbro F90000267, F90000274, and F90000285 fuel pumps
• Integrated venturi jet pump ensures consistent fuel scavenging and maintains internal baffle levels
• Fully compatible with E85, methanol, and all types of pump or race gas
• Constructed from CNC machined 6061-T6 aluminum with a protective anodized finish
• Includes all necessary gaskets and hardware for a secure installation
• Manufacturer Part Number: 20-1512

Note: Fuel pumps are not included with this hanger assembly.

Fits 1993-2002 Toyota Supra (all MK4 models).

The Radium Engineering fuel pump hanger (MPN 20-1511) is a precision-engineered, drop-in solution designed for high-horsepower MK4 Supra builds. This hanger is specifically optimized to accommodate up to three fuel pumps, including the TI Automotive E5LM brushless series, ensuring your fuel system can meet the demands of modern performance tuning. To maintain reliability under all driving conditions, the assembly features an integrated venturi jet pump for effective fuel scavenging, preventing starvation during low fuel levels or high-G cornering.

• Direct drop-in fitment for the factory 1993-2002 Toyota Supra fuel tank
• Accommodates up to three fuel pumps (not included)
• Specifically designed for TI Automotive E5LM brushless fuel pumps
• Integrated venturi jet pump ensures continuous fuel scavenging
• Full compatibility with E85, methanol, and all gasoline blends
• Anodized aluminum construction for superior corrosion resistance
• Manufacturer Part Number: 20-1511

Note: This unit does not include the fuel pumps; they must be purchased separately.

Fits Toyota Supra MK4 (JZA80) models.

The Radium Engineering Fuel Pump Hanger (MPN 20-1510) provides a high-performance, drop-in fuel delivery solution for the JZA80 chassis. Engineered to accommodate high-horsepower builds, this hanger replaces the factory unit and allows for the installation of one, two, or three internal fuel pumps to meet extreme flow requirements. The assembly is fully compatible with E85 and other alcohol-based fuels, ensuring long-term reliability in demanding environments.

• Direct drop-in replacement for the OEM fuel pump hanger
• Configurable to hold up to three (3) fuel pumps
• Specifically designed for use with Walbro GSS342 and AEM 50-1200 pumps
• Fully compatible with E85 and alternative fuels
• Precision-engineered for optimal tank fitment and seal
• Manufacturer Part Number: 20-1510

Please note: Fuel pumps are not included with this assembly and must be sourced separately.

Fits 2001-2007 Mitsubishi Lancer Evolution 7, 8, and 9.

The Radium Engineering fuel pump hanger (MPN: 20-1342) is a precision-engineered drop-in replacement for the factory unit in the CT9A chassis. This hanger is designed specifically to accommodate high-flow Walbro F90000-series fuel pumps, providing a secure and efficient mounting solution for high-performance fuel systems. By utilizing the factory mounting points, this assembly ensures a straightforward installation while optimizing fuel delivery.

• Direct drop-in replacement for the OE fuel pump assembly
• Designed specifically for Walbro F90000-series pumps (F90000267, F90000274, F90000285)
• Maintains factory tank integration for a clean installation
• Compatible with Mitsubishi Lancer Evolution 7, 8, and 9 models
• Manufacturer Part Number: 20-1342
• Note: Fuel pumps are not included and must be purchased separately

Fits 2001-2007 Mitsubishi Lancer Evolution VII, VIII, and IX.

The Radium Engineering Fuel Hanger (MPN: 20-1340) is a high-performance drop-in replacement for the factory fuel pump assembly in Mitsubishi Evo 7/8/9 models. Engineered for enthusiasts building high-horsepower engines, this hanger provides the necessary fuel volume by allowing for the installation of high-flow aftermarket pumps while retaining standard tank mounting points.

This unit is specifically designed to accommodate one or two internal fuel pumps, providing a scalable solution for fuel delivery. The CNC-machined assembly is fully compatible with pump gas and E85, ensuring durability against corrosive fuels. Please note that fuel pumps are not included with this hanger.

• Manufacturer Part Number: 20-1340
• Direct drop-in fitment for Mitsubishi Evo 7/8/9 factory fuel tanks
• Configuration: Designed for single or dual pump setups
• Pump Compatibility: Fits AEM 50-1220 and DeatschWerks DW440 fuel pumps
• Fuel Compatibility: 100% compatible with E85, methanol, and gasoline
• Construction: High-grade materials and seals for long-term reliability

Fits 1999-2001 Mitsubishi Lancer Evolution VI.

The Radium Engineering Fuel Hanger Connection Kit is designed to provide a seamless plumbing solution when installing the Radium 20-1330 in-tank fuel hanger. This kit bridges the gap between the fuel hanger and the factory fuel system, utilizing high-pressure lines and application-specific fittings to connect to the OEM feed and return hard lines.

• Engineered for direct compatibility with the Radium 20-1330 fuel hanger
• Simplifies installation by eliminating the need for custom fuel line fabrication
• Includes pre-assembled short fuel lines and all necessary adapter fittings
• Compatible with factory Mitsubishi Evo 6 feed and return hard lines
• Manufacturer Part Number: 20-1332

Note: This kit is designed specifically for the Evolution VI chassis and is not compatible with Evolution I through V models.

Fits 1992-2001 Mitsubishi Lancer Evolution I, II, III, IV, V, and VI.

The Radium Engineering fuel pump hanger (MPN 20-1330) provides a robust, drop-in solution for upgrading the fuel delivery system on early Mitsubishi Evolution models. This assembly replaces the restrictive factory unit, allowing for the installation of a single high-flow aftermarket fuel pump while maintaining perfect compatibility with the factory fuel tank.

• Direct drop-in replacement for the OE fuel pump hanger assembly
• Engineered specifically for single aftermarket fuel pump configurations
• CNC machined construction with an anodized finish for corrosion resistance
• Designed to support high-flow demands of performance applications
• Compatible with multiple fuel types, including gasoline and E85

Please note: This kit includes the hanger and necessary installation hardware; the fuel pump itself is not included.

Fits 2010-2015 Chevrolet Camaro (LS, LT, SS, Z/28, ZL1).

The Radium Engineering fuel hanger plumbing kit is a complete solution designed to integrate seamlessly with Radium in-tank fuel pump hangers. This kit provides all necessary high-flow fuel lines to route fuel from the hanger to the front of the vehicle, making it an essential upgrade for high-horsepower builds requiring increased fuel delivery capacity.

This comprehensive package features a Radium high-flow adjustable fuel pressure regulator to maintain precise rail pressure and a dedicated fuel filter equipped with a durable, reusable stainless steel mesh element. To ensure a professional installation, the kit includes all required fittings and vehicle-specific mounting brackets to secure the components within the Camaro chassis.

• Direct fuel line plumbing from Radium fuel hanger to engine bay
• Includes high-flow adjustable fuel pressure regulator
• Fuel filter with stainless steel mesh filter element
• Comprehensive hardware kit with fittings and brackets
• Manufacturer Part Number: 20-1326-03

Fits 2008-2015 Cadillac CTS-V.

The Radium Engineering fuel plumbing kit (MPN: 20-1325-05) is a complete high-performance fuel delivery solution designed to work seamlessly with the Radium in-tank fuel pump hanger. This kit replaces restrictive factory lines with high-flow, chemical-resistant PTFE hoses, ensuring the durability required for high-output applications. It features a dedicated fuel filter with a micro-fiberglass element, providing superior filtration efficiency to protect your fuel injectors from contaminants.

• Complete fuel plumbing kit designed for Radium in-tank fuel hangers
• High-flow PTFE fuel lines for maximum chemical resistance and durability
• Fuel filter with micro-fiberglass element for high-efficiency filtration
• Included fuel pressure regulator and all necessary installation brackets
• Full E85 compatibility
• Capable of supporting 4-digit horsepower outputs
• Manufacturer Part Number: 20-1325-05

Fits 2008-2015 Cadillac CTS-V models. This comprehensive plumbing kit from Radium Engineering is engineered to complete the installation of a Radium in-tank fuel pump hanger, providing a high-flow fuel delivery solution capable of supporting four-digit horsepower outputs.

Built for durability and chemical resistance, the kit utilizes PTFE-lined fuel hoses which eliminate fuel vapor permeation and are fully compatible with E85, gasoline, and alcohol-based fuels. The included fuel filter features a cleanable stainless steel mesh element for superior filtration and serviceability. This system replaces restrictive factory lines with high-flow plumbing and includes a dedicated fuel pressure regulator to maintain consistent rail pressure under high-load conditions.

• Manufacturer Part Number: 20-1325-03
• Includes pre-assembled PTFE-lined fuel lines
• High-flow fuel filter with stainless steel mesh element
• Fuel pressure regulator with all necessary adapter fittings
• Vehicle-specific mounting brackets for a secure, bolt-on installation
• Fully compatible with E85 and pump gasoline

Fits 2008-2015 Cadillac CTS, 2010-2015 Chevrolet Camaro, and 2008-2009 Pontiac G8 models. This drop-in fuel pump hanger is a high-performance replacement for the factory unit, designed to accommodate the increased fuel demands of forced induction or E85-powered engines.

The Radium Engineering fuel hanger allows for the installation of one or two high-flow pumps while maintaining full compatibility with the OEM fuel level sender. It is engineered to offer flexibility in fuel plumbing, as it can be used with either the factory fuel lines or upgraded aftermarket lines. Constructed from premium materials to ensure long-term reliability in harsh racing environments, this assembly is fully compatible with all fuel types including E85.

• Manufacturer Part Number: 20-1322
• Pump Compatibility: Supports 1 or 2 Walbro F90000267, F90000274, or F90000285 pumps (not included)
• Fuel Compatibility: 100% E85 and gasoline safe
• Installation: Direct drop-in replacement into the factory fuel tank
• System Features: Retains functionality of the OE fuel level sender
• Plumbing: Compatible with OEM or aftermarket fuel lines