Fits 2015-2019 Ford Transit-150.

The DFC Right Rear Brake Hub Bolt Kit provides high-strength replacement hardware essential for securing the hub assembly to the axle flange. Because brake hub bolts are critical fasteners subject to high torque and environmental exposure, they can often become corroded, stretched, or damaged during removal. Replacing these bolts during hub or bearing service ensures proper clamping force and maintains the structural integrity of the drivetrain and braking system.

• Direct-fit replacement for factory right rear brake hub hardware
• Manufactured to meet or exceed OE specifications for strength and durability
• Essential for ensuring a secure, professional-grade hub installation
• Helps prevent bolt failure or loosening caused by reusing fatigued hardware

Fits 2000-2012 Ford Focus.

Maintain the structural integrity of your rear hub assembly with this DFC Left Rear Bearing Nut. Designed as a direct replacement for the factory fastener, this nut ensures the wheel hub remains securely seated on the spindle, maintaining the necessary clamping force for safe operation. Because most wheel bearing nuts are engineered with locking features or specific deformation properties that are compromised during removal, professional service standards dictate replacement during any hub or bearing installation to prevent loosening or premature bearing failure.

• Position: Left Rear
• Engineered to match OE thread pitch and material strength for reliable torque retention
• Critical for maintaining proper wheel bearing preload
• Provides secure hub-to-spindle attachment for improved vehicle safety

Secure your braking system with genuine Brembo caliper mounting hardware, the critical link between your calipers and the vehicle chassis or fork. These precision fasteners are engineered to maintain exact caliper alignment and handle the extreme shear forces generated during high-torque braking events. Using the correct mounting hardware is essential to prevent vibration-induced loosening and ensure even pad-to-rotor contact.

• Manufactured to precise tensile strength and thread pitch specifications.
• Engineered to withstand high thermal loads without losing clamping force.
• Corrosion-resistant coating ensures long-term serviceability and easy removal.
• Essential for routine brake service, caliper upgrades, or replacing stretched OE fasteners.
• Maintains critical component geometry for consistent mechanical performance.

Maintain the hydraulic integrity and safety of your braking system with genuine Brembo master cylinder mounting hardware. These replacement fasteners and service components are engineered to the exact tolerances required for Brembo master cylinders, ensuring a secure attachment to the clip-ons or handlebars. Using genuine hardware is critical for preserving a firm, consistent lever feel and preventing vibration-induced loosening at the master cylinder pivot or mounting points.

• Genuine Brembo replacement service components
• Engineered for precise fitment and total system integrity
• Ensures reliable mounting for high-performance hydraulic master cylinders
• Maintains original equipment safety and performance standards

This Brembo Hardware Pack is engineered for the precise assembly and maintenance of high-performance multi-piece brake rotors. Designed specifically for 365x34mm and 380x34mm rotor sizes, this kit provides the critical fasteners required to secure the rotor ring to the bell or hat assembly. This is an essential service component for maintaining the structural integrity and thermal expansion performance of your braking system.

As a partial hardware kit, it includes the high-strength bolts and washers needed for a hardware refresh but does not include the bushings. This kit is ideal for professional brake service where existing bushings are within specification or are being sourced separately for a custom application.

• Compatible with Brembo 365x34mm and 380x34mm multi-piece rotors
• Partial kit configuration (bushings not included)
• Engineered for high-torque applications and thermal cycling
• Direct replacement for one-time-use assembly hardware
• Ensures proper rotor-to-hat mating for track and street use

Maintain the integrity of your braking system with a genuine Brembo 44mm dust boot. This critical component serves as the primary barrier between the caliper piston and the harsh environment of the wheel well, shielding internal seals from abrasive brake dust, road grime, and moisture.

Over time, high thermal cycles and environmental exposure can cause original boots to crack or tear, leading to piston corrosion and potential caliper seizure. Replacing damaged boots during a pad change or caliper service ensures smooth piston retraction and extends the service life of your brake components.

• Manufacturer: Brembo
• Component Type: Caliper Piston Dust Boot
• Piston Diameter: 44mm
• Material: High-temperature resistant rubber compound

This genuine Brembo 40mm dust boot is an essential replacement component for maintaining the performance and longevity of your braking system. Specifically engineered for 40mm caliper pistons, this boot provides a critical seal that shields the piston and internal seals from road grime, brake dust, and moisture.

• Genuine Brembo replacement part
• Precision fit for 40mm diameter caliper pistons
• Durable construction to withstand high-heat braking environments
• Prevents piston seizure and seal degradation by blocking contaminants

Replacing a torn, cracked, or heat-fatigued dust boot is a vital part of any caliper service or rebuild. By ensuring the piston remains clean and protected, you maintain smooth piston retraction and consistent pedal feel while preventing premature seal failure.

This genuine Brembo 38mm dust boot is a critical replacement component for maintaining the integrity of your high-performance braking system. Designed to fit 38mm caliper pistons, this boot acts as a primary barrier against brake dust, road debris, and moisture, preventing contaminants from reaching the internal piston seal and cylinder bore.

• Precision Fit: Engineered specifically for 38mm Brembo caliper pistons to ensure a secure, weather-tight seal.
• Durability: Constructed from high-grade elastomer compound to withstand the extreme heat cycles and environmental exposure typical of performance driving.
• Critical Maintenance: Replacing torn or heat-cracked boots is essential during a caliper rebuild to prevent piston stiction and corrosion.
• Authentic Brembo: Ensures exact compatibility and performance matching the original equipment standards.

Restore the integrity of your braking system with this genuine Brembo 34mm dust boot. Designed for calipers utilizing 34mm pistons, this boot acts as a critical secondary seal, preventing brake dust, road debris, and moisture from reaching the piston bore and the primary pressure seal. Maintaining intact dust boots is essential for preventing piston pitting and ensuring smooth, consistent caliper retraction.

• Compatible with Brembo calipers using 34mm pistons
• Durable elastomer construction resists high brake temperatures
• Helps prevent piston sticking and internal seal contamination
• Genuine Brembo replacement part for precise fitment

Maintain the hydraulic integrity and performance of your braking system with this genuine Brembo 38mm piston seal. Designed specifically for calipers utilizing a 38mm piston diameter, this replacement seal is critical for preventing brake fluid leaks and ensuring proper piston retraction after every brake application.

• Precision-engineered for 38mm Brembo caliper pistons
• Manufactured from high-grade elastomers for thermal stability and fluid resistance
• Restores consistent pedal feel and hydraulic pressure
• Direct replacement for worn or damaged OE seals

Using authentic Brembo replacement components ensures your braking system operates within the tight tolerances required for high-performance and street applications alike. Regular inspection and replacement of caliper seals are essential during brake overhauls to prevent contamination and maintain stopping power.

Maintain the integrity of your braking system with this genuine Brembo 28mm replacement piston seal. This critical hydraulic component is engineered to provide a precise, high-pressure seal between the caliper bore and the piston, preventing fluid leaks and protecting against external contaminants.

Over time, heat cycles and exposure to brake fluid can cause seals to harden or lose elasticity, leading to sluggish piston retraction or brake drag. Replacing worn seals with genuine Brembo components ensures consistent pedal feel and reliable stopping power. This seal is an essential part for rebuilding or servicing high-performance Brembo calipers equipped with 28mm pistons.

• Piston Diameter: 28mm
• Material: High-temperature resistant elastomer
• Ensures proper piston retraction and hydraulic pressure
• Genuine Brembo replacement component

Maintain consistent braking performance and a firm pedal feel with this authentic Brembo racing caliper bleeder screw. Designed for high-performance hydraulic systems, this component allows for efficient air evacuation during brake fluid service and system bleeding.

Constructed with a durable zinc-plated finish, this bleeder screw provides essential corrosion resistance to withstand the high temperatures and environmental exposure typical of track use. The precision-machined M10x1.0 thread ensures a secure, leak-free seal within the caliper body for reliable pressure retention.

• Brand: Brembo
• Thread Pitch: M10x1.0
• Overall Length: 29mm
• Material: Zinc-Plated Steel
• Finish: Silver
• Application: Brembo Racing Calipers

Protect your braking system from environmental contaminants with the Brembo Standard Bleeder Screw Cap. This essential component fits securely over the bleeder valve on Brembo brake calipers to prevent road grime, brake dust, and moisture from obstructing the orifice or causing the threads to seize over time.

Molded from a durable, high-temperature rubber compound, these caps are designed to withstand the extreme thermal cycles experienced during performance driving without hardening or cracking. Maintaining intact bleeder caps is a critical yet often overlooked step in ensuring your next brake bleed is clean and efficient.

• Genuine Brembo replacement component ensures proper fitment
• High-temperature resistant rubber construction for long-term durability
• Provides a weather-tight seal to protect the internal bleeder valve channel
• Designed for use on standard Brembo performance and OE-equipped calipers

Fits 1979-2012 Beaver Motorcoach Monterey. This DFC Premium Hardware Kit is engineered to restore optimal braking performance by replacing worn, corroded, or fatigued brake components on your motorcoach. Fresh hardware is essential for ensuring brake pads move freely within the caliper, preventing uneven wear, dragging, and excessive heat build-up.

• Low coefficient of friction for smooth, consistent pad engagement and release
• High heat and chemical resistance specifically designed for heavy-duty braking demands
• Corrosion-resistant finish prevents component seizing and simplifies future maintenance
• Precision-engineered for easy assembly and exact fitment in factory locations

Maintain optimal hydraulic pressure and a firm pedal feel with this precision-engineered Wilwood 1/4-28 bleed screw. Designed as a direct replacement for worn, rounded, or clogged bleeder valves in many Wilwood calipers, this component is essential for effectively purging air from your brake system during routine maintenance or fluid flushes.

• Thread Size: 1/4-28
• Finish: Durable Black Oxide
• Material: High-strength steel construction
• Application: Fits a wide range of Wilwood and aftermarket performance brake calipers
• Function: Allows for precise control of fluid flow to remove trapped air from hydraulic lines

Constructed from high-quality steel with a corrosion-resistant black oxide finish, this bleeder screw is built to handle the extreme heat and pressure of performance driving environments. Replacing a compromised bleed screw ensures a tight seal and prevents fluid leaks that can lead to catastrophic brake failure.

Fits 1990-1997 Mazda Miata models (Base, LE, M Edition, SE, STO) equipped with ABS.

The Radium Engineering Master Cylinder Brace is a critical upgrade for drivers seeking a firmer, more responsive brake pedal. In the NA Mazda Miata, the master cylinder is mounted to a relatively thin firewall that flexes under heavy braking loads. This deflection leads to a spongy pedal feel and makes it difficult to modulate braking force precisely at the limit.

This bolt-in brace (MPN 20-0843) provides a rigid mechanical stop for the master cylinder, effectively bracing it against the shock tower. By eliminating firewall flex, it ensures that your foot's effort is translated directly into hydraulic pressure. The result is improved pedal stiffness and consistent braking performance on both the street and the track.

• Designed specifically for 1990-1997 Mazda Miata chassis equipped with ABS
• Reduces firewall deflection for improved braking modulation and feel
• Durable construction with high-quality hardware
• Direct bolt-in installation with no permanent modifications required
• Manufacturer Part Number: 20-0843

Fits select 2009-2025 Mercedes-Benz (A, C, E, G, GLA, GLC, GLE, S-Class, AMG, and Maybach) and 2017-2019 Infiniti QX30 models.

The Power Stop Euro-Stop SW-1656 Electronic Brake Pad Wear Sensor is a precision-engineered replacement designed to restore the functionality of your vehicle's brake monitoring system. When brake pads wear down to a critical level, these sensors complete a circuit to trigger the dashboard warning light, ensuring you perform maintenance before rotor damage or safety issues occur. Built to meet or exceed original equipment standards, this sensor ensures a seamless fit and reliable electrode conductivity under high-heat braking conditions.

• Manufacturer Part Number: SW-1656
• Thermal Reliability: Tested at 500°F to ensure consistent performance in extreme braking environments.
• OEM Standard Construction: Includes application-specific grommets, mounting clips, and cable protection sleeves.
• Weatherproof Design: Features water-tight connections to prevent corrosion and false signaling.
• Direct Fit: Engineered for easy installation with no modifications required to the factory harness.

The Alcon Pro-System Rotor Temperature Paint Kit (TEM.100440) is a professional-grade diagnostic tool designed to monitor peak brake rotor temperatures during high-performance or competition use. Accurate thermal data is essential for optimizing brake ducting airflow and selecting the appropriate brake pad compound for your specific track conditions.

By applying these temperature-sensitive paints to the rotor vanes or outer edges, you gain a clear visual record of the maximum temperatures reached during a session. The paint changes color at specific heat thresholds, allowing technicians and drivers to identify potential overheating issues, prevent thermal fatigue, and ensure the braking system remains within its ideal operating window.

• Manufacturer Part Number: TEM.100440
• Function: Visual heat range monitoring for thermal management
• Application: Direct application to brake rotor edges or cooling vanes
• Included: Multi-color temperature-sensitive paint set with applicators
• Benefit: Assists in brake pad selection and cooling duct optimization

Fits select 1978-up General Motors vehicles equipped with front disc and rear drum brake systems.

The Wilwood 260-11322 GM Style Fixed Proportioning Valve is a precision-engineered replacement designed for OE-style mounting. This non-adjustable valve provides essential brake balance by regulating fluid pressure to prevent premature rear-wheel lockup. It includes an integrated anti-dive metering delay valve, which enables rear brake pressure to build momentarily before the front circuit engages, enhancing vehicle stability and improving braking transitions.

• Construction: Manufactured from lightweight aluminum with a durable black anodized finish for corrosion resistance.
• Pressure Regulation: Delivers a 63% pressure reduction to the rear circuit after reaching a 350 PSI knee point.
• Metering Delay: Features a 30 PSI rear-to-front delay circuit to optimize pad-to-rotor and shoe-to-drum engagement.
• Safety Monitoring: Includes a circuit failure sender that activates at 50 ± 10 PSI to notify the driver of hydraulic pressure loss.
• Specifications: Maximum recommended operating pressure of 2000 PSI.
• Installation: Designed to allow direct connection of original brake lines when mounted in the factory location.

Designed for precision and durability, Wilwood 250-10201 Primary Rear Brackets serve as intermediate mounting components to adapt caliper brackets to specific vehicle applications. These brackets provide the necessary interface to ensure proper caliper positioning and alignment for consistent braking performance.

Each bracket is engineered from a high-strength aluminum alloy, offering a balance of reduced unsprung weight and high structural rigidity. Depending on the application, these units are equipped with steel clinch nuts and other specialized hardware required for a secure and reliable installation onto the vehicle's rear assembly.

• Manufacturer Part Number: 250-10201
• Position: Rear
• Material: High-strength aluminum alloy
• Hardware: Includes steel clinch nuts or application-specific hardware as required
• Type: Primary intermediate adapter bracket

Fits select 2005-2012 Porsche 911, Boxster, and Cayman models.

Maintain the integrity of your vehicle's braking system with the Brembo A00417 Front Right Brake Pad Wear Sensor. This electronic component is engineered to monitor the remaining thickness of your brake pads, sending an immediate signal to the dashboard when they reach their minimum service life. Built to exact OE specifications, this sensor ensures your Porsche's safety systems function exactly as intended by the factory.

Brembo recommends replacing brake wear sensors during every pad change to ensure reliable electrical connectivity and to prevent sensor failure caused by heat cycling. This sensor features high-quality wiring and reinforced connectors designed to resist the extreme temperatures and harsh environmental conditions found within the wheel well.

• Direct-fit replacement for the front right brake position
• Electronic monitoring triggers warning light at minimal pad thickness
• High-quality wiring and connectors resist high heat and moisture
• Designed to meet or exceed original equipment standards
• Manufacturer Part Number: A00417

Fitment Applications:

The DFC 370-74015 Parking Brake Hardware Kit is engineered to restore the performance and reliability of your vehicle's parking brake system. Over time, constant heat cycles and environmental exposure cause original springs and clips to lose tension, leading to brake drag, premature shoe wear, and unwanted noise. This kit replaces worn-out components with premium materials designed for longevity and consistent engagement.

• Complete axle kit includes necessary hardware for both the driver and passenger sides
• Manufactured with high-quality materials to resist fatigue and maintain proper tension
• Minimizes brake drag to improve fuel efficiency and prevent rotor overheating
• Reduces noise and vibration for quieter operation
• Engineered to meet or exceed the performance of the factory original hardware
• Manufacturer Part Number: 370-74015

Fits 2014-2015 Mitsubishi Mirage (DE, ES, and RF). This DFC Rear Drum Brake Hardware Kit is engineered to restore proper braking performance by replacing fatigued or corroded return springs, hold-down pins, and clips that lose tension over thousands of heat cycles.

Using high-grade materials for maximum longevity, this kit ensures even brake shoe pressure and consistent retraction. Properly functioning hardware is critical for preventing shoe drag, which reduces fuel efficiency and leads to premature friction wear and excessive heat buildup. This comprehensive set provides everything needed to refresh the drum assembly on both rear wheels.

• Complete axle kit includes hardware for both driver and passenger sides
• Manufactured with premium materials to resist corrosion and heat fatigue
• Reduces brake noise, chatter, and vibration
• Minimizes drag to improve fuel efficiency and extend shoe life
• Manufacturer Part Number: 370-72012

This DFC Parking Brake Drum Hardware Kit provides all the necessary components to refresh your vehicle's parking brake system for a complete axle. Over time, heat cycles and environmental exposure cause OE parking brake springs and pins to lose tension or corrode, leading to shoe drag, excessive noise, or improper engagement. This kit replaces worn hardware to restore consistent performance and prevent premature wear on the parking brake shoes.

• Fits select 2004-2020 Mitsubishi Endeavor, Lancer, Outlander, and Subaru Forester, Impreza, and WRX models.
• Manufactured with premium materials to ensure long-term durability and proper tension.
• Reduces noise and vibration by maintaining correct shoe alignment and retraction.
• Optimizes fuel efficiency by minimizing brake drag.
• Complete axle kit includes hardware for both the driver and passenger sides.
• Manufacturer Part Number: 370-72005

Fits select 1999-2010 Saab 9-3, 9-5, and Saturn LS/LW/L-Series models (2.3T).

The DFC 370-65000 Parking Brake Drum Brake Hardware Kit is engineered to restore the functionality and safety of your vehicle's emergency brake system. Over time, heat cycles and environmental exposure weaken return springs and corrode pins, leading to parking brake drag, premature shoe wear, or poor engagement. This kit provides a comprehensive solution to refresh your braking components for consistent, reliable performance.

• Manufactured from premium materials for high-temperature resistance and longevity.
• Sold as a complete axle kit to service both the driver and passenger side rear wheels.
• Prevents premature wear by maintaining proper tension and alignment within the drum assembly.
• Minimizes mechanical drag to improve fuel efficiency and reduce unwanted noise/vibration.
• Precision-engineered for a direct fit to replace worn-out original equipment hardware.
• Manufacturer Part Number: 370-65000

Fits 1964-1979 Austin Healey Sprite and MG Midget.

The DFC 370-64000 Rear Drum Brake Hardware Kit is designed to restore the mechanical integrity of your vehicle's braking system. Over time, brake hardware is subjected to extreme heat cycles and environmental corrosion, leading to weakened return springs and fatigued hold-down clips. This kit replaces those worn components to ensure proper shoe retraction and alignment, preventing uneven wear and excessive heat buildup.

• Manufactured using premium materials for longevity and consistent tension
• Prevents premature shoe wear by ensuring proper component positioning
• Minimizes shoe drag to improve fuel efficiency and prevent drum overheating
• Reduces brake noise and vibration for quieter operation
• Sold as a complete axle kit to service both rear wheels
• Manufacturer Part Number: 370-64000

Fits select 1950-1974 International L110, R100, S100, A100, B100, and C1000 series trucks and vans. This DFC 50-87 Rear Drum Brake Hardware Kit provides the essential components needed to restore proper brake shoe tension and operation on your vintage International vehicle.

Over time, heat cycles and corrosion weaken drum brake springs and hardware, leading to uneven shoe wear, increased drag, and excessive noise. This kit replaces worn factory components with premium-grade materials designed for longevity and consistent pedal feel. Sold as a complete axle kit, it includes the necessary hardware for both the driver and passenger side rear wheels to ensure a balanced braking system.

• Manufactured using premium materials for maximum durability and heat resistance
• Prevents premature shoe wear by ensuring proper return spring tension
• Minimizes brake drag to improve overall fuel efficiency and reduce heat buildup
• Reduces chatter, noise, and vibration during braking
• Complete axle kit includes hardware for both rear wheels
• Manufacturer Part Number: 370-54061

Fits select 1958-1975 International 100, Travelall, A120, A122, B120, B122, M Series Van, and MS 1210.

The DFC 370-54059 Front Drum Brake Hardware Kit is engineered to restore the structural integrity and mechanical efficiency of your vehicle's drum braking system. Over years of operation, heat cycles and environmental exposure fatigue OE return springs and hold-down hardware, resulting in uneven shoe wear, excessive drag, and audible chatter. This kit replaces those worn components with premium materials designed for high-heat resilience and consistent tension.

• Complete Axle Solution: Sold as a full axle kit to service both front wheels simultaneously, ensuring balanced braking performance.
• Reduced Drag: Restores proper shoe retraction to improve fuel efficiency and prevent premature lining wear.
• Noise Suppression: Corrects vibration and rattle issues by ensuring all components are secured to factory-grade tolerances.
• Longevity: Manufactured using high-grade materials for consistent performance under heavy braking loads.
• Manufacturer Part Number: 370-54059

Fits 1969-1974 Ford F-500 Base.

The DFC 370-54043 Conventional Front Drum Brake Hardware Kit is designed to restore the structural integrity and performance of your vehicle's braking system. Over time, heat cycles and environmental exposure weaken drum hardware, leading to uneven shoe wear, increased drag, and excessive noise. This kit replaces worn-out springs, pins, and retainers to ensure proper shoe alignment and consistent return action.

This complete axle kit provides the necessary components for both front wheels, helping to minimize drag for improved fuel efficiency and extending the service life of your brake shoes. Each component is manufactured from premium materials to withstand high heat and maintain proper tension throughout the life of the brakes.

• Manufacturer Part Number: 370-54043
• Position: Front
• Service Scope: Complete axle kit (covers both driver and passenger sides)
• Prevents premature shoe wear and ensures consistent braking performance
• Reduces brake noise and vibration for quieter operation
• Reduces mechanical drag to help maintain fuel efficiency

Fits select 1960-1981 Dodge (B-Series, D-Series, W-Series, M300, P-Van), Ford (F-250, P-Series), and Plymouth (Voyager) models.

The DFC 370-54041 Drum Brake Hardware Kit is engineered to restore the mechanical integrity of your vehicle's drum braking system. Over years of heat cycles and environmental exposure, factory return springs lose their tension and hold-down pins can corrode, leading to uneven shoe wear, excessive drag, and annoying brake squeal. Replacing these components during every shoe service is critical for maintaining proper shoe-to-drum clearance and ensuring a consistent pedal feel.

This comprehensive axle kit includes all necessary springs, pins, and clips to service both sides of the vehicle. By using premium materials resistant to fatigue and corrosion, DFC hardware helps minimize drag—improving fuel efficiency—and prevents the premature wear often caused by dragging or sticking shoes.

• Restores proper spring tension for consistent shoe return
• Reduces brake noise, vibration, and harshness (NVH)
• Minimizes brake drag to improve fuel economy and extend shoe life
• Complete axle kit provides hardware for both driver and passenger sides
• Manufactured to precise tolerances for reliable, long-term performance
• Manufacturer Part Number: 370-54041