Fits select 2005-2025 Polaris General, General XP, RZR, and 900 Fusion models. This complete kit includes two PRP XCR suspension seats and the necessary adapter mounts to interface with your factory seat bases and sliders.

The PRP XCR Suspension Seat is engineered for riders who need a balance of high-performance containment and daily-driver accessibility. Designed with side bolsters that taper toward the front, these seats provide lateral support during aggressive cornering while maintaining open hip bolsters. This low-profile design allows for easy entry and exit and ensures compatibility with OEM 3-point seat belts and retractable harnesses. The seats are constructed with a vinyl-coated nylon suspension liner and dual-density foam to significantly reduce impact on the body and minimize fatigue during long days on the trail or dunes.

• Includes 2x XCR Suspension Seats and adapter mounts
• Removable seat cushion for easy cleaning and debris drainage (mud, sand, water)
• Integrated 5th point harness slot for upgraded safety configurations
• Durable, water-resistant vinyl construction for easy maintenance
• Retains factory seat sliding and removal functions for battery access
• Bolts directly to OEM seat bases and sliders

Fits 2017-2025 Can-Am Maverick X3 and Maverick X3 Max models including Turbo, DS, RS, MR, RC, and Smart-Shox editions.

The PRP XCR Suspension Seat is engineered for UTV riders who demand a balance between high-performance containment and easy vehicle ingress/egress. These seats feature low side bolsters toward the front to secure you during aggressive driving, while the open hip bolsters accommodate OEM 3-point seat belts and retractable harnesses. This design simplifies lap belt tightening and makes it easier to jump in and out of the cockpit during trail or dune stops.

Constructed for long-distance endurance, the XCR utilizes a vinyl-coated nylon suspension liner and dual-density foam to absorb high-G impacts and vibrations. The 3-layer gel-infused bottom cushion is removable, allowing for easy cleaning and facilitating the drainage of water, mud, and sand through the bottom of the seat. The dual-slot headrest provides a modern aesthetic while offering clean routing for harnesses and communication lines.

• Low-profile side containment for easier entry and exit
• Compatible with OEM 3-point belts, 4-point, and 5-point harnesses
• Vinyl-coated nylon suspension liner reduces rider fatigue
• 3-layer gel-infused removable bottom cushion for superior comfort
• Integrated lumbar support and wide shoulder area to prevent torso pinching
• Fifth-point harness slot included
• Includes a pair of seats finished in Black and Gray

Fits 1995-2001 Jeep Cherokee XJ (Classic, Country, Limited, SE, and Sport).

PRP Daily Driver High Back Suspension Seats strike a balance between off-road containment and daily ergonomics. While aggressive race seats can make getting in and out of a vehicle difficult, these seats feature 5-inch side bolsters that provide secure lateral support on the trail while remaining low enough for easy entry during daily commutes. The internal vinyl-coated nylon suspension liner and dual-density foam work together to absorb vibration and harsh impacts, significantly reducing body fatigue during long days of rock crawling or trail riding.

This comprehensive kit includes a pair of seats finished in black tweed centers with durable vinyl backing and piping. To facilitate a straightforward installation, the kit includes specific adapter mounts designed to bolt directly to your factory sliders. This allows you to retain the ability to adjust the seat position fore and aft after installation.

• Seat Dimensions: 31" High x 21" Wide x 26" Deep
• Containment: 5-inch side bolsters for lateral stability
• Construction: Vinyl-coated nylon suspension liner with dual-density foam
• Materials: Black tweed center, vinyl back, and vinyl piping
• Installation: Includes adapter mounts to fit OEM sliders
• Quantity: Complete pair (2 seats and mounts)

Notes: Installed seat height is typically 2 inches higher than the factory seats. These seats are designed for off-road use and are intended to be used with 4-point or 5-point off-road harnesses. Use of factory 3-point seat belts will require a seat belt extension or angle bracket. Passenger-side tumble functionality may not be retained after installation.

Fits select 2020-2024 Polaris RZR PRO XP, PRO XP 4, Pro R, Pro R 4, Turbo R, and Turbo R 4 models.

The PRP XCR Suspension Seat is engineered for UTV enthusiasts who prioritize both comfort and accessibility. Designed with low side containment, these seats make entering and exiting the vehicle effortless—ideal for trail or dune rides that require frequent stops. The open hip bolsters allow for seamless integration with factory 3-point seat belts or retractable harnesses, while the front bolsters provide necessary lateral support when the terrain gets aggressive.

Construction features a vinyl-coated nylon suspension liner paired with dual-density foam to absorb high-impact energy and minimize rider fatigue. The signature 3-layer gel-infused bottom cushion is removable, facilitating easy cleaning and allowing water, sand, and debris to drain through the bottom of the seat rather than accumulating in the cockpit. The XCR headrest includes dual harness slots to accommodate communication lines and 4-point harnesses, while a built-in 5th point slot supports full 5-point harness configurations.

• Low side bolsters for easy ingress/egress and lap belt adjustment
• Removable 3-layer gel-infused bottom cushion for superior long-ride comfort
• Dual-density foam and vinyl-coated nylon liner reduce body impact
• XCR headrest with dual-slot harness openings
• Integrated lumbar support and wide shoulder area to prevent pinching
• Built-in 5th point harness slot
• Color: Black and Gray
• Quantity: Pair (Driver and Passenger)

Fits 2007-2018 Jeep Wrangler JK and Wrangler Unlimited JKU.

The PRP Daily Driver High Back Suspension Seats provide the ideal balance between secure off-road containment and the accessibility required for a daily-driven Jeep. Designed with 5 inches of side bolster containment, these seats keep you planted during technical trail climbs and rock crawling without the entry and exit struggles associated with full-containment race seats.

Each seat is built with a vinyl-coated nylon suspension liner and dual-density foam to absorb high-frequency vibrations and heavy impacts. This combination significantly reduces body fatigue during long days in the dirt. The upholstery features a gray breathable tweed center for comfort in varying temperatures, finished with a heavy-duty vinyl back and piping for superior wear resistance.

This kit includes two seats and the vehicle-specific adapter mounts for the 2007-2018 JK/JKU platform. These mounts bolt directly to your factory sliders, allowing you to retain full fore-and-aft adjustability. Please note that installation typically results in a seat height approximately 2 inches higher than factory units.

• Includes (2) Daily Driver Seats and (2) Adapter Mounts
• 5-inch containment bolsters for off-road support
• Gray Tweed center with Vinyl back and piping
• Seat Dimensions: 31" H x 21" W x 26" D
• Designed for use with 4-point or 5-point off-road harnesses
• Compatible with factory sliders to maintain sliding functionality
• Note: 3-point seat belts require a seat belt extension or angle bracket
• Note: Some 2-door models require the removal of a 1/2" metal bar on the passenger slider

Fits 2020-2024 Polaris RZR Pro XP, Pro R, and Turbo R models including 2-seat and 4-seat configurations (Premium, Ultimate, Sport, and Launch Editions).

The PRP XCR Suspension Seat Kit is engineered for UTV enthusiasts who demand a balance of high-speed containment and all-day comfort. Designed with low side bolsters at the front, these seats provide secure lateral support in rough terrain while remaining low enough at the hips to allow easy entry and exit. This unique design is specifically compatible with factory 3-point seat belts, retractable harnesses, and traditional 4-point or 5-point harnesses via the integrated 5th point slot.

Constructed for the rigors of trail and dune riding, the XCR features a vinyl-coated nylon suspension liner and dual-density foam to absorb high-G impacts and reduce rider fatigue. The removable, three-layer gel-infused bottom cushion allows for easy cleaning and provides a path for water, sand, and debris to drain out of the seat. The wide shoulder area and built-in lumbar support prevent torso pinching and ensure proper posture during long-distance rides.

• Low side containment for easy entry/exit and harness compatibility
• Vinyl-coated nylon suspension liner for impact absorption
• Dual-density foam and 3-layer gel-infused bottom cushion
• Removable seat cushion for drainage of mud, sand, and water
• Dual harness slot headrest for easy routing of harnesses and comm lines
• Built-in lumbar support and wide shoulder profile
• Includes 5th point harness slot for 5-point safety systems

Fits 1976-1986 Jeep CJ7 and 1987-1995 Jeep Wrangler YJ.

PRP Daily Driver High Back Suspension Seats provide the ideal balance between off-road containment and daily-driven convenience. Designed with 5-inch side bolsters, these seats offer sufficient lateral support to keep you secure during technical trail sections while remaining low enough for easy entry and exit during everyday use. The internal vinyl-coated nylon suspension liner and dual-density foam work together to absorb impacts and vibrations, significantly reducing driver fatigue during long days of rock crawling.

This kit includes a pair of seats finished with gray tweed centers, durable vinyl backs, and vinyl piping. To simplify the installation process, the package comes with adapter mounts that bolt directly to your factory OEM sliders, allowing you to maintain fore and aft adjustability in your Jeep.

• Seat Dimensions: 31" H x 21" W x 26" D
• Included adapter mounts compatible with OEM seat sliders
• Construction: Vinyl-coated nylon suspension liner with dual-density foam
• Materials: Gray tweed center inserts with vinyl backing and piping
• Bolster Height: 5" for balanced containment and accessibility

Note: Seat height typically sits 2" higher than factory seats. Designed for off-road use only with 4-point or 5-point harnesses; standard 3-point seat belts require an extension or angle bracket. Passenger seats may lose the ability to tumble after installation.

Fits 2017-2025 Can-Am Maverick X3 and Maverick X3 Max models (all trim levels including Turbo, DS, RS, MR, and RC).

The PRP XCR Suspension Seat provides the perfect balance between high-performance containment and utility-focused convenience. Designed for UTV enthusiasts who are frequently in and out of their vehicles during trail or dune rides, the XCR features low-profile side bolsters at the front for easy entry and exit. The bolsters remain open at the hips to accommodate factory 3-point seat belts or retractable harnesses while providing necessary support when the terrain gets rough. A vinyl-coated nylon suspension liner and dual-density foam absorb harsh impacts, significantly reducing the physical fatigue felt after a full day of riding.

• 3-layer gel-infused bottom cushion for superior long-distance comfort
• Removable seat cushion allows mud, sand, and water to drain through the bottom
• Dual-slot XCR headrest for streamlined harness and communication line routing
• Wider shoulder area and built-in lumbar support to prevent torso pinching and back strain
• Integrated 5th point slot for 5-point harness compatibility
• Kit includes a pair of seats finished in black

Upgrade your 2007-2018 Jeep Wrangler JK or JKU with a seating solution designed for both trail stability and daily usability. The PRP Daily Driver Suspension Seat features 5 inches of side containment, providing the lateral support needed for off-road maneuvers while maintaining a bolster height that allows for easy entry and exit during frequent stops.

Built on a vinyl-coated nylon suspension liner, these seats use dual-density foam to absorb high-frequency vibrations and heavy impacts, significantly reducing driver fatigue during long days of rock crawling or highway transit. This kit includes a pair of high-back seats finished with breathable tweed centers, durable vinyl backs, and vinyl piping for long-term wear resistance. To simplify installation, the package includes adapter mounts that bolt directly to your factory OEM sliders, allowing you to maintain the forward and backward sliding functionality of your original seats.

• Fits 2007-2018 Jeep Wrangler JK and JKU (2-Door and 4-Door models)
• Includes two (2) Daily Driver High Back seats and vehicle-specific adapter mounts
• 5-inch side containment for optimal balance of support and accessibility
• Vinyl-coated nylon suspension liner reduces body impact and fatigue
• Tweed center sections with vinyl backing and piping
• Seat Dimensions: 33” Tall x 22” Wide x 26” Deep
• Note: Installed seat height is approximately 2” higher than factory units
• Designed for use with 4-point or 5-point off-road harnesses; 3-point factory belts require an extension or angle bracket
• Compatibility Note: Some 2-door JK models require the removal of a 1/2” metal bar on the passenger seat slider for adapter fitment

Fits 2007-2018 Jeep Wrangler JK and JKU (Rubicon, Sahara, Sport, X, and Unlimited models).

The PRP Premier is a versatile, all-around off-road suspension seat designed to provide 7 inches of containment while maintaining easy entry and exit from the vehicle. Built for trail rigs and prerunners, these seats utilize a vinyl-coated nylon suspension liner and dual-density foam to absorb high-impact forces and reduce body fatigue during long days in the dirt or dunes. This complete kit includes a pair of seats and the necessary adapter mounts to bolt directly to your factory sliders, preserving fore-and-aft adjustability.

• Kit includes: (2) Premier High Back Seats and (2) adapter mounts
• Materials: Gray Tweed center, vinyl back, and vinyl piping
• Construction: Vinyl-coated nylon suspension liner with dual-density foam
• Dimensions: 31" H x 21" W x 26" D
• Installation: Bolts to OEM sliders; maintains sliding functionality
• Safety: Designed for 4-point or 5-point off-road harnesses

Note: Installed seat height is typically 2 inches higher than factory seats. Use with 3-point seat belts requires a seat belt extension or angle bracket. For some 2-door JK models, a 1/2-inch metal bar on the passenger seat slider must be removed for compatibility with these adapter mounts.

Fits Polaris RZR 570 models.

The PRP XCR Suspension Seat is engineered for UTV enthusiasts who demand a balance between lateral containment and accessibility. Designed specifically for trail and dune riding, the XCR features low-profile side bolsters and open hip areas. This configuration allows for the use of factory 3-point seat belts or retractable harnesses while making it significantly easier to enter and exit the vehicle during frequent stops.

Constructed to endure harsh off-road environments, these seats utilize a vinyl-coated nylon suspension liner and dual-density foam to mitigate impact and reduce rider fatigue. The 3-layer gel-infused bottom cushion provides superior comfort for all-day excursions and is completely removable, allowing water, mud, and sand to drain freely through the seat base for easy cleaning.

• Dual-slot headrest openings for streamlined harness and communication line routing
• Integrated lumbar support to maintain posture and comfort in rough terrain
• Reinforced 5th point harness slot for sub-strap compatibility
• Wider shoulder area designed to prevent torso pinching and forward shoulder roll
• High-resilience dual-density foam with gel-infused top layer
• Includes both driver and passenger side seats

Fits 1997-2002 Jeep Wrangler TJ (Sahara, SE, Sport, and X).

The PRP Daily Driver High Back Suspension Seat is engineered to provide a balance between off-road containment and daily-driven accessibility. Featuring 5-inch side bolsters, these seats offer the lateral support needed for technical trails while maintaining low enough sides for easy entry and exit during everyday use. The interior construction utilizes a vinyl-coated nylon suspension liner and dual-density foam to absorb impacts and vibrations, significantly reducing occupant fatigue during long days of rock crawling or desert transit.

This complete kit includes two seats and the necessary adapter mounts to bolt directly to your 1997-2002 Jeep Wrangler TJ factory sliders. This configuration ensures you retain the OEM sliding functionality for adjustable legroom. The seats are finished with a durable tweed center for breathability, paired with vinyl backing and piping for easy cleaning and long-term wear resistance.

• Containment: 5-inch side bolsters for balanced support and entry
• Construction: Vinyl-coated nylon suspension liner with dual-density foam
• Materials: Tweed center, vinyl back, and vinyl piping
• Seat Dimensions: 31" Tall x 21" Wide x 26" Deep
• Seat Height: Approximately 2" higher than factory OE seats
• Safety: Designed for off-road use with 4-point or 5-point harnesses
• Mounting: Includes adapter mounts for factory sliders; retains slide function

Note: Passenger seats may not retain the factory tumble feature after installation. Use with 3-point factory seat belts requires a seat belt extension or angle bracket. Designed for off-road use only.

Fits 1995-2001 Jeep Cherokee XJ (Classic, Country, Limited, SE, Sport).

PRP Premier High Back suspension seats provide the ideal balance of containment and accessibility for your Cherokee XJ. Featuring 7 inches of side containment, these seats keep you securely planted during technical off-road maneuvers while maintaining a bolster height that allows for easy entry and exit from the cabin. The internal construction utilizes a vinyl-coated nylon suspension liner and dual-density foam specifically engineered to absorb high-frequency vibrations and heavy impacts, significantly reducing body fatigue during long days in the dirt or dunes.

This complete kit includes two seats and the application-specific adapter mounts required for the XJ chassis. These brackets are designed to bolt directly to your factory seat sliders, allowing you to maintain fore-and-aft adjustability. Finished in a gray tweed center with vinyl backing and piping, these seats offer a classic aesthetic with modern off-road performance.

• Seat Type: High-back suspension seat with 7-inch side containment
• Construction: Vinyl-coated nylon liner and dual-density impact foam
• Dimensions: 31" Tall x 21" Wide x 26" Deep
• Material: Gray tweed center with vinyl back and piping
• Installation: Includes adapter mounts to retain OEM sliding function
• Harness Compatibility: Designed for 4-point or 5-point off-road harnesses
• Important Note: Seat height is typically 2 inches higher than factory units; 3-point belts require extensions

Fits the Polaris RZR 570.

PRP XCR Suspension Seats are engineered for riders who prioritize both comfort and accessibility during long days on the trail or dunes. Designed with low side bolsters toward the front, these seats provide necessary lateral containment in rough terrain while making it significantly easier to climb in and out of the cab compared to deep-bucket race seats.

The open bolster design at the hips ensures compatibility with OEM 3-point seat belts and retractable harnesses, while the dual-slot headrest and 5th-point seat slot accommodate full 5-point harness systems. Each seat is built with a vinyl-coated nylon suspension liner and dual-density foam to absorb high-impact energy and reduce rider fatigue. The 3-layer gel-infused bottom cushion is removable, allowing for easy cleaning and preventing water, mud, or sand from pooling in the seat base.

• Low Side Containment: Optimized for frequent entry and exit without sacrificing support.
• Advanced Cushioning: Dual-density foam and a 3-layer gel-infused bottom for long-distance comfort.
• Durable Construction: Marine-grade vinyl and a vinyl-coated nylon suspension liner.
• Harness Compatible: Features dual slot headrest openings and a 5th-point sub-strap slot.
• Self-Draining: Removable cushion allows sand, mud, and water to drain through the bottom.
• Built-in Lumbar Support: Contoured design to reduce back strain during aggressive riding.

Fits 2003-2006 Jeep Wrangler TJ models including Rubicon, Sahara, SE, Sport, Unlimited, and X.

PRP Premier High Back suspension seats are engineered to provide the ideal balance between high-performance containment and everyday accessibility. These seats feature 7 inches of side containment to keep you securely positioned during aggressive trail runs or high-speed desert sections, while the medium-height bolsters ensure entry and exit remain manageable for a daily-driven or weekend rig. The internal vinyl-coated nylon suspension liner and dual-density foam work in tandem to absorb harsh vertical impacts, significantly reducing rider fatigue during long days off-road.

This comprehensive kit includes two Premier seats and the necessary adapter mounts to bolt directly to your factory 2003-2006 TJ seat sliders. This configuration preserves your ability to slide the seats forward and backward for proper legroom. The seats are finished with a durable tweed center for breathability, supported by a heavy-duty vinyl back and vinyl piping for long-lasting wear resistance.

• Seat Dimensions: 31 in. Tall x 21 in. Wide x 26 in. Deep
• Containment: 7-inch side containment for off-road security
• Materials: Breathable Tweed centers with Vinyl back and piping
• Mounting: Includes adapter mounts for 2003-2006 Jeep TJ factory sliders
• Safety: Designed for use with 4-point or 5-point off-road harnesses
• Installation Note: Seat height is approximately 2 inches higher than factory units
• Part Number: PRP-PREMIER-TJ-KIT

Fits 1976-1995 Jeep CJ7 and Wrangler YJ.

The PRP Premier High Back Suspension Seat is a versatile, all-around seating solution designed to increase comfort and containment for off-road applications. Featuring 7 inches of side containment, these seats provide enough lateral support to keep you secure in rough terrain while remaining low enough for easy entry and exit from the vehicle. The internal vinyl-coated nylon suspension liner and dual-density foam work together to absorb high-impact landings and vibrations, significantly reducing body fatigue during long days on the trail or in the dunes.

This complete kit includes a pair of Premier seats finished with gray tweed centers, vinyl backs, and vinyl piping for a classic look and durable performance. The included adapter mounts are engineered to bolt directly to your factory OEM sliders, allowing you to install the seats while maintaining the ability to slide forward and backward for optimal ergonomics.

• Seat Dimensions: 31" Tall x 21" Wide x 26" Deep
• Containment: 7-inch medium-level side containment
• Materials: Gray Tweed center, Vinyl back, and Vinyl piping
• Construction: Dual-density foam with a vinyl-coated nylon suspension liner
• Installation: Reuses factory sliders via included adapter mounts
• Harness Compatibility: Designed for 4-point or 5-point off-road harnesses
• Seat height sits approximately 2" higher than factory OE seats

Note: Intended for off-road use only. Factory 3-point seat belts require a seat belt extension or angle bracket for proper fitment. Passenger seat tumbling functionality may not be retained after installation.

Fits all 2003-2006 Jeep Wrangler TJ models, including Rubicon, Sahara, SE, Sport, Unlimited, and X.

The PRP Premier High Back is a versatile, all-around suspension seat designed specifically to improve comfort and driver containment in Jeep Wrangler TJ models. Featuring 7 inches of side containment, these seats provide security in rough terrain while allowing for easy entry and exit. The internal construction uses a vinyl-coated nylon suspension liner and dual-density foam to absorb high-impact forces, significantly reducing the physical fatigue often felt after long days on the trail or in the dunes.

This kit includes two Premier seats finished with durable gray tweed centers, vinyl backs, and vinyl piping. To simplify installation, the package includes vehicle-specific adapter mounts that bolt directly to your factory seat sliders, allowing you to retain full sliding functionality.

• Seat Dimensions: 31" Tall x 21" Wide x 26" Deep
• Materials: Gray tweed center, vinyl back, and vinyl piping
• Mounting: Includes adapter mounts for 2003-2006 Jeep Wrangler TJ factory sliders
• Containment: 7 inches of medium-level side containment
• Suspension: Vinyl-coated nylon liner with dual-density foam for impact reduction

Note: These seats typically sit 2 inches higher than the factory units. Designed for off-road use only with 4-point or 5-point harnesses. Passenger seats may lose the factory tumble functionality. Use with OE 3-point seat belts requires a seat belt extension or angle bracket.

Fits 1995-2001 Jeep Cherokee XJ models including Classic, Country, Limited, SE, and Sport. These PRP Daily Driver suspension seats are designed for XJ owners who need improved off-road containment without sacrificing the accessibility required for a daily-driven vehicle. With 5 inches of side containment, these seats provide a secure hold on the trail while allowing for easy entry and exit during around-town driving.

Constructed with a vinyl-coated nylon suspension liner and dual-density foam, these seats are engineered to dissipate energy and reduce the physical fatigue caused by impacts during rock crawling or high-speed trail runs. The included adapter mounts bolt directly to your factory sliders, allowing the seats to maintain their fore-and-aft adjustability. This kit comes as a pair and features a durable gray tweed center with vinyl backing and piping for long-term wear resistance.

• Fits 1995-2001 Jeep Cherokee XJ (Classic, Country, Limited, SE, Sport)
• Includes two (2) Daily Driver High Back seats and adapter mounts
• Bolts to OEM seat sliders to retain sliding functionality
• 5-inch containment height for balanced support
• Materials: Gray Tweed center, Vinyl back, and Vinyl piping
• Seat Dimensions: 31" H x 21" W x 26" D
• Note: Seat height is approximately 2" higher than stock; designed for off-road use with 4-point or 5-point harnesses

Fits all 2007-2018 Jeep Wrangler JK and JKU models, including Rubicon, Sahara, Sport, and Unlimited trims.

PRP Premier High Back Suspension Seats provide a balance of containment and accessibility for your trail rig or daily-driven Jeep. With 7 inches of medium-level side containment, these seats keep you securely positioned during technical maneuvers without the entry and exit difficulties associated with deep-bucket race seats. The vinyl-coated nylon suspension liner and dual-density foam core are engineered to absorb vibration and harsh impacts, significantly reducing driver fatigue during long days in the dunes or on the rocks.

This complete kit includes two black Premier seats featuring breathable tweed centers with durable vinyl backs and piping. The package comes with vehicle-specific adapter mounts designed to bolt directly to your factory sliders, allowing you to maintain fore and aft adjustability while upgrading your interior.

• Seat Dimensions: 31" H x 21" W x 26" D
• Dual-density foam for long-distance comfort and impact absorption
• Durable vinyl-coated nylon suspension liner
• Mounts to factory sliders via included adapter brackets
• Designed for use with 4-point or 5-point off-road harnesses
• Includes 2x Premier High Back seats and mounting hardware

Note: Installed seat height is typically 2 inches higher than factory seating. For 2-door JK models, a 1/2-inch metal bar on the passenger seat slider must be removed for mount compatibility. These seats are intended for off-road use only.

Fits 1997-2002 Jeep Wrangler Sahara, SE, Sport, and X.

PRP Daily Driver suspension seats provide an ideal balance of off-road security and daily-driver convenience. Designed with 5-inch side bolsters, these seats offer the containment needed for technical trails and rock crawling while maintaining low-profile sides for easy entry and exit during everyday use. The internal vinyl-coated nylon suspension liner and dual-density foam construction effectively absorb impacts and vibrations, significantly reducing body fatigue during long days in the dirt.

This kit includes a pair of seats upholstered in gray tweed centers with durable vinyl backs and piping. To simplify installation, the package includes adapter mounts that bolt directly to your factory 1997-2002 TJ seat sliders, allowing you to retain full fore-and-aft sliding functionality.

• Seat Dimensions: 31" Tall x 21" Wide x 26" Deep
• Material: Gray Tweed Center, Vinyl Back, and Vinyl Piping
• Containment: 5-inch side bolsters for trail stability
• Mounting: Includes adapter mounts for 1997-2002 TJ OEM sliders
• Safety: Designed for use with 4-point or 5-point off-road harnesses
• Note: Seat height is approximately 2" higher than factory stock seats

Fits 2003-2006 Jeep Wrangler TJ including Rubicon, Sahara, SE, Sport, X, and Unlimited models.

The PRP Daily Driver Suspension Seat is engineered to provide the perfect balance between off-road containment and everyday accessibility. While deep racing buckets can make entering and exiting your Jeep a chore, this seat features 5 inches of side containment to keep you secure on the trail without interfering with daily use. The vinyl-coated nylon suspension liner and dual-density foam work together to absorb harsh impacts, significantly reducing body fatigue during long days of rock crawling or desert driving.

This complete kit includes a pair of seats and the necessary adapter mounts to bolt directly to your factory 2003-2006 Jeep Wrangler sliders. This allows you to maintain the full functionality of your sliding seat tracks. The seats are finished in a durable gray tweed center with vinyl backing and piping for a clean, rugged look that stands up to the elements.

• Dimensions: 31 inches Tall x 21 inches Wide x 26 inches Deep
• Containment: 5-inch side bolsters for trail stability
• Materials: Gray Tweed center, Vinyl back, and Vinyl piping
• Hardware: Includes adapter mounts for 2003-2006 Jeep TJ OEM sliders
• Installation: Replaces factory seats while retaining sliding functionality
• Safety Note: Designed for off-road use with 4-point or 5-point harnesses
• Fitment Note: Seat height sits approximately 2 inches higher than stock; 3-point belts require extensions

Fits 1976-1995 Jeep CJ7 and Wrangler YJ models.

PRP Daily Driver High Back Suspension Seats provide the ideal balance between off-road containment and everyday accessibility. Designed with 5 inches of side bolster containment, these seats keep you securely planted during technical maneuvers while remaining low enough for easy entry and exit during daily use. The vinyl-coated nylon suspension liner and dual-density foam work together to absorb high-frequency vibrations and heavy impacts, significantly reducing driver fatigue during long days on the trail or rock crawling.

This complete kit includes a pair of seats and the necessary adapter mounts to bolt directly to your factory seat sliders, preserving your vehicle's forward and backward adjustability. Each seat is finished with a durable tweed center, vinyl backing, and vinyl piping for a classic look that stands up to the elements.

• Containment: 5 inches for optimal balance of support and accessibility
• Construction: Vinyl-coated nylon suspension liner with dual-density foam
• Materials: Tweed center, vinyl back, and vinyl piping
• Fitment: Bolts to OEM sliders using included adapter mounts
• Dimensions: 31" H x 21" W x 26" D
• Quantity: Sold as a pair (2 seats and 2 mount kits)
• Note: Seat height typically sits 2" higher than factory seats; passenger seat may not retain tumble function
• Safety: Designed for off-road use only with 4-point or 5-point harnesses

Fits all 2003-2006 Jeep Wrangler TJ models, including Rubicon, Sahara, Sport, and Unlimited (LJ).

PRP Daily Driver High Back Suspension Seats are designed to provide superior comfort and containment without the difficulty of climbing over the tall bolsters found in dedicated racing shells. Each seat features 5 inches of side containment, striking the ideal balance between holding you secure during technical rock crawling and allowing for easy entry and exit during daily use. The vinyl-coated nylon suspension liner and dual-density foam work together to absorb impacts and vibrations, significantly reducing driver fatigue on long trail days.

This comprehensive kit includes a pair of seats and the necessary adapter mounts to bolt directly to your 2003-2006 Jeep TJ factory sliders. This ensures you maintain the ability to adjust the seat position forward and back. The seats are finished with durable black tweed centers, vinyl backs, and vinyl piping for a rugged, trail-ready look.

• Fitment: 2003-2006 Jeep Wrangler TJ / Unlimited
• Containment: 5-inch bolsters for lateral support
• Construction: Vinyl-coated nylon suspension liner with dual-density foam
• Materials: Tweed center with vinyl back and piping
• Dimensions: 31" H x 21" W x 26" D
• Installation: Includes adapter mounts; retains factory sliding function
• Safety Note: Designed for off-road use with 4-point or 5-point harnesses; 3-point belts require extensions
• Height Note: Seat height is approximately 2" higher than OE factory seats

Fits 1995-2001 Jeep Cherokee XJ models including Classic, Country, Limited, SE, and Sport.

The PRP Premier High Back is a versatile suspension seat designed to provide 7 inches of medium-level side containment, keeping you secure during technical off-roading while allowing for easy entry and exit. Built for comfort and durability, these seats utilize a vinyl-coated nylon suspension liner and dual-density foam to significantly reduce impact on the body and minimize fatigue during extended use in the dirt or dunes.

This comprehensive kit includes two Premier seats and the necessary adapter mounts to bolt directly to your Cherokee's factory sliders, allowing you to maintain fore and aft adjustability. The seats are finished with a classic black tweed center, vinyl backing, and vinyl piping for long-lasting wear resistance.

• 7-inch medium containment sides for stability and accessibility
• High-density dual-density foam for superior impact absorption
• Vinyl-coated nylon suspension liner to reduce vibration
• Includes 2x Premier High Back seats and XJ-specific adapter mounts
• Retains factory seat slider functionality
• Dimensions: 31" Tall x 21" Wide x 26" Deep

Note: These seats typically sit 2" higher than stock XJ seats. Designed for off-road use only with 4-point or 5-point harnesses. Passenger-side tumble functionality may be lost. Factory 3-point seat belts require an extension or angle bracket.

The PRP Kilo Composite Race Seat (AC4601-203) is engineered for drivers who demand maximum containment, comfort, and control during high-G maneuvers. Constructed with a high-strength fiberglass-reinforced plastic (FRP) shell, this seat provides a lightweight solution without compromising structural integrity or adding unnecessary weight.

Designed with input from professional racers, the Kilo features an enhanced containment profile including deep thigh bolsters, extended hip support, and a wide shoulder area to lock the driver in place. To combat fatigue during long stints, PRP includes a thick, injection-molded bottom cushion specifically designed to absorb energy and impacts over rough terrain. The recessed shoulder area ensures full compatibility with HANS and other neck restraint systems, allowing for an upright, ergonomic driving position without pushing the shoulders forward.

• Lightweight FRP Shell: High-strength composite construction for durability and improved vehicle responsiveness.
• Superior Containment: Deep bolsters and extended hip support reduce lateral movement and driver fatigue.
• Impact Absorption: High-density foam padding and an energy-absorbing injection-molded bottom cushion for protection against repeated impacts.
• Harness Compatibility: Oversized harness slots accommodate harnesses, communication lines, and pumper hoses.
• Breathable Materials: Features durable, water-resistant vinyl on the bolsters with a breathable sports mesh center to manage heat.
• Occupant Fitment: Comfortably fits drivers with up to approximately a 42-inch waist.
• Manufacturer Part Number: AC4601-203

The PRP Kilo Composite Race Seat (AC4601-201) is engineered for high-performance off-road racing where driver containment and comfort are critical. Featuring a lightweight fiber-reinforced plastic (FRP) composite shell, this seat delivers exceptional strength-to-weight ratios to improve vehicle handling and responsiveness. The high-containment design utilizes deep thigh bolsters, extended hip support, and a wide shoulder area to minimize lateral movement and reduce driver fatigue during high-G cornering.

Built for the rigors of long-distance racing, the Kilo includes a thick, injection-molded bottom cushion specifically designed to absorb impact energy. The recessed shoulder area ensures full compatibility with HANS and other neck restraint systems, allowing the driver to maintain an upright, ergonomic position. Large harness slots are integrated to accommodate racing harnesses, communication lines, and pumper hoses.

• Lightweight FRP composite shell construction
• High-density foam padding for impact protection
• Breathable sports mesh center with water-resistant vinyl bolsters
• Fits drivers comfortably up to approximately a 42-inch waist
• HANS and neck restraint compatible recessed shoulder area
• Oversized slots for harnesses and pumper/comm lines
• Manufacturer Part Number: AC4601-201

The PRP Kilo Composite Race Seat (AC4601-204) is engineered for high-containment, providing the lateral support and stability required for high-G maneuvers and rough terrain. Constructed with a lightweight Fiber Reinforced Plastic (FRP) shell, this seat balances structural rigidity with weight savings to improve overall vehicle handling. The interior is upholstered with water-resistant vinyl on the high-wear arm areas and a breathable sports mesh center to manage heat during long-distance stints.

• High-containment design with deep thigh bolsters and extended hip support to reduce lateral movement.
• Lightweight FRP composite shell provides exceptional strength and durability.
• Fits riders comfortably up to approximately a 42-inch waist.
• Thick, injection-molded bottom cushion specifically designed to absorb energy from repeated impacts.
• Recessed shoulder area for full compatibility with HANS and other neck restraint systems, ensuring an upright seating position.
• Large harness slots easily accommodate racing harnesses, communication lines, and pumper hoses.
• Materials: Durable water-resistant vinyl, high-density foam padding, and breathable mesh.
• Manufacturer Part Number: AC4601-204

Experience superior driver containment and endurance comfort with the PRP Kilo Composite Race Seat. Engineered for high-G environments, this seat features a high-strength Fiberglass Reinforced Polymer (FRP) composite shell that balances lightweight performance with exceptional rigidity. The high-containment design utilizes deep thigh bolsters, extended hip support, and a wide shoulder area to minimize lateral movement and driver fatigue during long stints.

• Advanced Ergonomics: Features a recessed shoulder area specifically designed for HANS and other head/neck restraint systems, ensuring an upright seating position without forward shoulder pressure.
• Impact Absorption: Includes a thick, injection-molded bottom cushion designed to absorb energy from harsh impacts, paired with high-density foam padding along the back and sides.
• Race-Ready Integration: Large harness slots accommodate multi-point harnesses, communication lines, and pumper hoses.
• Durable Construction: Upholstered in breathable Black Xcel Cloth for long-lasting wear and heat management.
• Fitment: Accommodates riders with up to approximately a 42-inch waist size.
• MPN: AC4601-260

The PRP Kilo Composite Race Seat is engineered for high-performance driving where containment and weight reduction are critical. Built with a high-strength fiber-reinforced plastic (FRP) composite shell, this seat provides a rigid platform that reduces lateral movement during high-G turns and technical maneuvers. The ergonomic design features deep thigh bolsters and extended hip support to lock the driver firmly in place, reducing fatigue during long racing stints.

Comfort is addressed through a specialized injection-molded bottom cushion designed to absorb energy from impacts, paired with high-density foam padding along the back and sides. The seat is upholstered in durable, water-resistant vinyl with a breathable sports mesh center to manage heat. For safety and communication integration, the Kilo includes oversized harness slots to accommodate multi-point harnesses, pumper hoses, and communication lines, while the recessed shoulder area ensures full compatibility with HANS and other neck restraint systems.

• High-strength FRP composite shell for lightweight durability
• High-containment bolsters for hip, thigh, and shoulder stability
• Large harness slots for comms, pumper hoses, and 5-point harnesses
• Recessed shoulder area compatible with HANS/neck restraints
• Injection-molded energy-absorbing bottom cushion
• Fits riders comfortably up to approximately a 42-inch waist
• Manufacturer Part Number: AC4601-206

The PRP G152 Flat Leather Steering Wheel is engineered for the rigors of off-road racing and recreational use in UTVs, Jeeps, and buggies where cabin space is at a premium. Constructed from high-strength aluminum, this wheel is strength-tested to a first deflection point of 1200+ lbs, ensuring structural integrity during aggressive maneuvering or harsh impacts. The spokes feature a durable matte black finish to resist glare and wear.

For ergonomic control, the wheel features 1.375-inch thick grips wrapped in high-quality leather that is both UV and moisture-resistant to prevent degradation in open-cockpit environments. This model includes a 6-point bolt pattern (2.75" / 70mm), making it compatible with the majority of aftermarket steering hubs and quick-release adapters used in the off-road industry.

• Manufacturer Part Number: G152
• Diameter: 13 inches (330mm)
• Dish Depth: 1.375-inch Flat Dish
• Grip Thickness: 1.375 inches
• Bolt Pattern: 6-Point (2.75" / 70mm)
• Weight: 2 lbs
• Materials: High-strength aluminum core with leather wrap
• Includes: PRP emblem plate