Fits 2020 Toyota Supra and BMW B58 engines.

Engineered to withstand the extreme cylinder pressures of high-horsepower forced induction builds, these Carrillo connecting rods are a critical upgrade for the B58 platform. Forged from a proprietary high-strength steel alloy, these rods offer an exceptional strength-to-weight ratio, providing the durability needed for high-RPM operation and increased boost levels.

This set of six rods comes equipped with premium 3/8" CARR bolts. These multiphase fasteners are specifically designed for racing applications, offering superior tensile strength and fatigue resistance compared to standard hardware. Each rod is precision-machined to exact tolerances, ensuring consistent bearing clearance and perfect alignment for your rotating assembly.

• Manufacturer Part Number: SCR13034-6
• Length: 5.828in (Center-to-Center)
• Fastener: 3/8" CARR Bolts
• Quantity: Set of 6 Rods
• Application: BMW B58 3.0L Inline-6 Engine

Strengthen your rotating assembly with Carrillo Pro-H connecting rods, specifically engineered for Audi and Volkswagen 2.0 TSI engines. These rods are designed to provide superior durability and fatigue resistance under the high cylinder pressures common in modified forced-induction builds. The Pro-H beam profile optimizes the strength-to-weight ratio, ensuring the bottom end can reliably handle increased power levels and high-RPM operation.

This set comes equipped with premium 3/8" CARR bolts. These high-tensile fasteners are preferred for professional racing and high-performance applications where standard hardware may fail. Each rod is manufactured to exacting tolerances to ensure consistent balance and fitment within the engine block.

• Manufacturer Part Number: SCR9714-4
• Engine Application: Audi/Volkswagen 2.0 TSI
• Rod Style: Pro-H Beam
• Fastener Size: 3/8" CARR Bolts
• Quantity: Matched Set of 4

Fits select BMW THP150/THP175 and Peugeot EP6CDT/EP5DTS engines.

These Carrillo Pro-H beam connecting rods (MPN: SCR7069-4) are engineered to handle the extreme cylinder pressures and RPMs found in high-performance builds. Utilizing a proprietary steel forging, these rods offer an exceptional strength-to-weight ratio, ensuring reliable reciprocating mass for your engine assembly. The Pro-H design provides maximum rigidity, making these an essential upgrade for tuned THP and EP6 series engines.

Each rod features high-strength 5/16 CARR bolts, specifically designed to resist fatigue and stretching under heavy loads. These fasteners provide the clamping force necessary to maintain bearing integrity during high-speed operation.

• Manufacturer Part Number: SCR7069-4
• Series: Pro-H Beam
• Hardware: 5/16 CARR Bolts
• Compatible Engines: BMW THP150, THP175; Peugeot EP6CDT, EP5DTS
• Material: Proprietary Forged Steel

Fits 2000-2011 Toyota Celica, Corolla, and Matrix, Lotus Elise and Exige, and Pontiac Vibe (2ZZ-GE).

The Carrillo Pro-H series connecting rods are engineered for high-performance builds that demand exceptional strength-to-weight ratios and high-RPM stability. Specifically designed for the 2ZZ-GE engine, these rods utilize a precision-engineered H-beam architecture to withstand the increased cylinder pressures of high-compression or forced-induction applications. These rods come equipped with 3/8-inch WMC bolts, which are high-tensile fasteners designed to provide superior clamping force and fatigue resistance compared to standard hardware.

• Manufacturer Part Number: SCR5517-4
• Rod Series: Pro-H
• Bolt Diameter: 3/8"
• Bolt Material: WMC
• Engine Fitment: 1.8L 2ZZ-GE
• Design: H-Beam

Fits 2009-2014 Nissan GT-R (VR38DETT).

Engineered to handle the extreme cylinder pressures of high-horsepower VR38DETT builds, the Carrillo Pro-H connecting rods are the industry standard for durability and precision. These H-beam rods are forged from a proprietary steel alloy, providing a superior strength-to-weight ratio that is essential for high-RPM stability and forced induction applications. This set is equipped with premium 3/8" CARR bolts, high-tensile fasteners designed specifically to resist stretching and failure under heavy loads.

• Manufacturer Part Number: SCR5451-6
• Rod Design: Pro-H Beam for maximum rigidity
• Fasteners: High-performance 3/8" CARR bolts included
• Application: Specifically balanced for the Nissan VR38DETT engine
• Material: Forged proprietary steel alloy

Fits 2008-2014 Mitsubishi Lancer Evolution GSR, MR, and MR Touring models equipped with the 4B11T engine.

Carrillo Pro-H beam connecting rods are engineered to withstand the extreme cylinder pressures and high RPMs of performance-built Mitsubishi 4B11T engines. This set features the heavy-duty Pro-H beam profile, providing the structural integrity required for high-horsepower forced induction applications. To ensure maximum clamping force and fatigue resistance, these rods come equipped with premium 3/8" CARR multiphase bolts, which offer superior tensile strength compared to standard fasteners.

• Manufacturer Part Number: SCR4622-4
• Rod Beam Style: Pro-H
• Fastener Type: 3/8" CARR Bolts
• Engine Compatibility: Mitsubishi 4B11T
• Application: High-performance street and competition use

Engineered for the high-output BMW S58B30 engine, this Carrillo connecting rod is designed to withstand the extreme stresses of high-performance and forced-induction applications. Forged from Carrillo's proprietary steel alloy, these rods offer an optimal strength-to-weight ratio, ensuring durability where factory components may fail under increased boost or RPM.

Each rod features a 5.945-inch center-to-center length and comes equipped with premium 3/8" CARR-PS fasteners. These high-tensile bolts are critical for maintaining cap stability and preventing bearing failure in professional racing environments. Proper installation requires adherence to the specific bolt stretch specification provided by Carrillo.

• Engine Application: BMW S58B30 (3.0L I6)
• Rod Length: 5.945 inches
• Hardware: 3/8" CARR-PS Bolts
• Required Bolt Stretch: 0.0065in - 0.0075in
• Material: Proprietary Forged Steel
• Manufacturer Part Number: SCR15003

Fits select BMW and Toyota models equipped with the B58 engine.

Engineered for high-output B58 builds, this set of six Carrillo Pro-H connecting rods provides the structural integrity required for forced induction and high-RPM applications. The Pro-H beam design is a signature Carrillo architecture, optimized to handle increased cylinder pressures while maintaining a balance of weight and strength. These rods come equipped with 3/8" WMC bolts, which are high-standard fasteners designed to prevent rod cap stretching under extreme loads.

• Manufacturer Part Number: SCR13492-6
• Series: Pro-H
• Center-to-Center Length: 5.828 in
• Fastener Type: 3/8 in WMC Bolt
• Engine Compatibility: BMW / Toyota B58
• Quantity: Set of 6 Rods

Designed for the high-output BMW S63B44T0 4.4L V8 engine, this set of Carrillo Pro-H connecting rods provides the structural integrity required for high-horsepower forced induction builds. These rods are engineered to replace the factory components in the BMW M5 and M6, offering superior fatigue resistance and dimensional stability under extreme cylinder pressures.

Carrillo Pro-H rods utilize a specialized H-beam architecture that optimizes the strength-to-weight ratio, ensuring reliable performance during high-RPM operation. Each rod is fitted with premium 3/8" WMC bolts, providing the clamping force necessary to maintain bearing clearance and prevent rod cap walking in demanding performance environments.

• Manufacturer Part Number: SCR11938-8
• Series: Pro-H Beam
• Hardware: 3/8" WMC Bolts
• Engine Application: BMW S63B44T0 (V8-4.4L Twin Turbo)
• Quantity: Set of 8

This set of eight Carrillo Bullet Series connecting rods is engineered for the high-stress environment of 6.2L Hellcat and 6.4L Hemi engines. Designed to provide superior strength and reliability over factory components, these rods are a critical upgrade for forced induction or high-RPM naturally aspirated builds where rotating assembly integrity is paramount.

Each rod features a 6.200-inch center-to-center length and is designed to accommodate a .927-inch wrist pin. They come equipped with high-tensile 7/16-inch bolts to ensure maximum clamping force and bottom-end stability under extreme combustion pressures.

• Manufacturer Part Number: BMHCX-62071
• Series: Carrillo Bullet
• Engine Compatibility: 6.2L Hellcat and 6.4L Hemi
• Rod Length: 6.200 in
• Wrist Pin Diameter: .927 in
• Bolt Size: 7/16 in
• Quantity: Set of 8 connecting rods

This Carrillo WMC 3/8" connecting rod bolt is a high-strength replacement fastener engineered for the rigorous demands of high-performance engine builds. Designed to provide consistent clamping force and superior fatigue resistance, these bolts are essential for maintaining rotating assembly integrity in high-RPM applications.

• Manufacturer Part Number: BLT-WMC6
• Thread Diameter: 3/8 inch
• Bolt Series: WMC
• Fitment: Specifically for Carrillo connecting rods requiring 3/8" WMC fasteners
• Quantity: Sold individually (Includes 1 bolt)

Precision-manufactured to exacting tolerances, the WMC series is the standard for reliability in professional engine assembly. Always follow manufacturer torque-to-stretch specifications during installation to ensure proper preload.

The Carrillo Rod Bolt Stretch Gauge (MPN: BLT-GAUGE) is a precision instrument designed for professional engine builders who demand exactness during assembly. Measuring bolt stretch is the only definitive way to verify proper fastener preload, as it bypasses the friction variables that can compromise traditional torque wrench readings.

This tool allows you to accurately measure the elongation of connecting rod bolts to ensure they are within the manufacturer's specified range. Achieving the correct stretch is critical for maintaining the structural integrity of the rod-to-crankshaft connection and preventing fastener failure under high RPM and heavy load conditions.

• Manufacturer Part Number: BLT-GAUGE
• Provides highly accurate, repeatable measurement of bolt elongation
• Essential for high-performance and race engine builds
• Constructed for durability and precision in a shop environment

Maintain the integrity of your rotating assembly with the Carrillo Pro Series CARR connecting rod bolt. Engineered for high-stress racing applications, this fastener is manufactured from CARR multiphase alloy to provide the superior tensile strength and fatigue resistance required to handle extreme RPM and cylinder pressures.

This individual replacement bolt ensures precise clamping force and dimensional stability. Designed with a 3/8-inch thread diameter and a 1.600-inch Under Head Length (UHL), it serves as a direct replacement for damaged or timed-out hardware in compatible Carrillo rod sets.

• Manufacturer Part Number: BLT-CARR6-PS
• Series: Pro Series
• Material: CARR Multiphase Alloy
• Thread Diameter: 3/8 inch
• Under Head Length (UHL): 1.600 inch
• Quantity: Single Bolt