Designed for high-output Honda J35 V6 engines, these Eagle Specialty Products H-beam connecting rods provide the structural integrity required for forced induction, nitrous, or high-RPM naturally aspirated builds. Forged from certified 4340 chromoly steel, these rods offer a superior strength-to-weight ratio compared to factory cast components, helping to prevent rod failure under increased cylinder pressures.

• Fits Honda J35 V6 engines
• Forged from 4340 chromoly steel for maximum tensile strength
• H-beam design optimized for high-load applications
• Precision machined to exacting tolerances for consistent balance
• Complete set of 6 connecting rods

Fits BMW S58B30T0 engines.

Engineered for high-output builds, Brian Crower MOAR Series I-Beam connecting rods provide the structural integrity required for S58 applications pushing extreme boost levels. The MOAR design is specifically profiled to handle the increased cylinder pressures and high-RPM stress that can cause factory rods to bend or fail during aggressive track use or competitive drag racing.

Each rod set is equipped with ARP Custom Age 625+ fasteners. These ultra-high-strength bolts offer significantly higher tensile strength and clamping force compared to standard hardware, ensuring the big-end bore remains round and secure under the most demanding rotational loads.

• Manufacturer: Brian Crower
• Product Line: MOAR Series
• Rod Profile: I-Beam
• Engine Compatibility: BMW S58B30T0
• Hardware: ARP Custom Age 625+ Fasteners

Fits 1989-2012 Cummins 5.9L and 6.7L diesel engines.

This BoostLine connecting rod kit is engineered to withstand the extreme cylinder pressures and high torque loads common in performance diesel applications. Precision-manufactured to a 7.559-inch length, these rods provide a significant strength upgrade over factory components, making them a critical addition for modified 5.9L and 6.7L Cummins builds where structural integrity is paramount.

• Manufacturer Part Number: DO7559-575
• Rod Length: 7.559 in
• Engine Compatibility: 5.9L / 6.7L Cummins Diesel
• Model Years: 1989-2012
• Product Type: Performance Connecting Rod Kit

Fits select 1996-2000 BMW 323i/is/Ci, 328i/is/Ci, 528i, and Z3 models.

Eagle Specialty Products H-Beam connecting rods provide the structural integrity required for high-performance and competition BMW M52 engine builds. Each rod is manufactured from a two-piece forged 4340 steel process to ensure superior grain flow and durability. The surfaces are fully machined and shot-peened to relieve stress and improve fatigue life, while sizing is held to exacting tolerances for consistent bearing crush and clearance.

This set of six rods comes weight-matched to ensure rotating assembly balance. For maximum reliability under high cylinder pressures and high RPMs, these rods are equipped with premium ARP 2000 rod bolts.

• Material: Forged 4340 Steel
• Design: H-Beam (two-piece forging)
• Hardware: ARP 2000 Rod Bolts
• Finish: Fully machined and shot-peened
• Quantity: Weight-matched set of 6
• MPN: CRS5313B63D

Fits 2020 Toyota Supra and BMW B58 engines.

Engineered to withstand the extreme cylinder pressures of high-horsepower forced induction builds, these Carrillo connecting rods are a critical upgrade for the B58 platform. Forged from a proprietary high-strength steel alloy, these rods offer an exceptional strength-to-weight ratio, providing the durability needed for high-RPM operation and increased boost levels.

This set of six rods comes equipped with premium 3/8" CARR bolts. These multiphase fasteners are specifically designed for racing applications, offering superior tensile strength and fatigue resistance compared to standard hardware. Each rod is precision-machined to exact tolerances, ensuring consistent bearing clearance and perfect alignment for your rotating assembly.

• Manufacturer Part Number: SCR13034-6
• Length: 5.828in (Center-to-Center)
• Fastener: 3/8" CARR Bolts
• Quantity: Set of 6 Rods
• Application: BMW B58 3.0L Inline-6 Engine

Fits Nissan GT-R models equipped with the 3.8L VR38DETT engine.

The Manley Turbo Tuff Pro Series I-Beam connecting rods are the industry standard for high-horsepower Nissan GT-R builds. These rods are forged from 300M vacuum degassed steel alloy, a material chosen for its exceptional tensile strength and fatigue resistance in extreme forced induction environments. As part of the Heavy Weight (H/W) series, these rods are specifically engineered to handle the massive cylinder pressures and torque loads generated by high-boost VR38DETT engines.

• Forged from 300M vacuum degassed aircraft-quality steel alloy
• Heavy Weight (H/W) design for maximum structural integrity
• I-Beam profile optimized for high-boost and high-RPM applications
• Shot-peened after machining and 100% magnafluxed for reliability
• Weight-matched sets to ensure engine balance
• Manufacturer Part Number: 15524-6

Fits 1993-1998 Toyota Supra (3.0L 2JZG).

Manley H-Tuff Series connecting rods are engineered for high-horsepower builds that require more strength than a standard H-beam without the weight of a heavy-duty I-beam. These rods are manufactured from aircraft-quality 4340 vacuum-degassed material and are designed to handle the increased cylinder pressures of turbocharged applications. Every rod is shot-peened to MIL-spec and undergoes individual magnetic particle inspection to ensure material integrity.

This set (MPN 15027R6-6) comes equipped with premium ARP Custom Age 625+ cap screw bolts, providing significantly higher tensile strength than standard ARP 2000 hardware for extreme reliability. Each set is weight-matched to within 1.5 grams and precision-honed to exacting tolerances for proper bearing clearances and wrist pin fitment.

• Manufactured from 4340 aircraft-quality forged steel
• Shot-peened and 100% magnetic particle inspected for fatigue resistance
• Includes high-strength ARP Custom Age 625+ cap screws
• Total weight-matched sets (balanced to +/- 1.5 grams)
• Precision finished for bend, twist, and bore sizing
• Manufacturer Part Number: 15027R6-6

Fits 1993-1998 Toyota Supra models equipped with the 3.0L 2JZ engine.

Manley H-Beam Series connecting rods offer a high-strength, precision-engineered solution for 2JZ engine builds. These rods are manufactured to the same rigorous quality standards as Manley’s Sportsmaster and Pro Series components, providing a reliable rotating assembly upgrade. Every rod is forged and finished to exacting tolerances to ensure consistent performance under high-load conditions.

Attention to detail is paramount in the manufacturing process. Each set undergoes a detailed inspection where final hone size, thread detail, and structural alignment (bend and twist) are strictly monitored. This ensures the rods arrive ready for installation with professional-grade precision. Designed to accommodate high-tensile ARP hardware, these rods provide the durability required for both street and track applications.

• Manufactured from high-strength steel forgings
• Precision-honed to exact tolerances for consistent crank pin and wrist pin fitment
• Strictly monitored for bend and twist to ensure proper engine geometry
• Compatible with ARP 8740 or ARP 2000 bolt options
• Engineered specifically for the 3.0L 2JZ-GE and 2JZ-GTE platforms
• Manufacturer Part Number: 15027-6

Fits BMW N55 and S55 turbocharged 3.0L inline-six engines.

Engineered for high-boost applications, the Manley Turbo Tuff Pro Series I-Beam connecting rods are designed to handle the extreme cylinder pressures and mechanical loads of modified BMW engines. These rods provide the structural integrity required for professional-grade N55 and S55 builds, replacing factory components with precision-forged steel that offers superior resistance to bending and fatigue.

• Forged from 4340 or 300M vacuum degassed steel alloys for maximum material density
• High-strength I-Beam design optimized for weight and rigidity in forced induction setups
• NHRA Legal Certification for Stock and Super Stock applications (select SKUs)
• Precision machined to exacting tolerances for consistent balance across all cylinders
• Manufacturer Part Number: 14449-6

Engineered for high-horsepower BMW N54 applications, the Manley Turbo Tuff I-Beam Connecting Rod Set (MPN 14448-6) provides the structural integrity required for extreme boost levels. These rods are manufactured from forged 4340 vacuum degassed steel alloy, designed specifically to handle the increased cylinder pressures of modified N54 engines.

• Forged from 4340 vacuum degassed steel alloy for maximum fatigue life.
• Precision I-beam design optimized for high-torque and forced induction environments.
• Center-to-center length: 5.709 inches.
• Shot-peened to SAE specifications after machining to improve surface hardness and durability.
• Meticulously weight-matched to ensure rotating assembly balance.
• Compatible with select BMW N54 engine platforms.

Each set of Manley Turbo Tuff rods undergoes rigorous quality control and dimensional inspection to meet tight tolerances, ensuring a drop-in fit for your high-performance engine build.

Designed for high-output builds, the Manley Turbo Tuff Pro Series I-Beam Connecting Rods provide the structural integrity required for the 2016+ Nissan VR30DDTT engine. These rods are manufactured from forged 4340 vacuum degassed steel alloy, engineered to handle the extreme cylinder pressures and heat found in modified forced-induction applications. The I-beam profile offers a superior strength-to-weight ratio compared to standard rods, ensuring reliability under heavy load.

• Fits 2016+ Nissan VR30DDTT engines
• Rod Length: 5.975"
• Material: Forged 4340 vacuum degassed steel alloy
• Design: Turbo Tuff Pro Series I-Beam
• Hardware: Includes high-strength ARP 2000 rod bolts
• NHRA Legal for Stock and Super Stock (select SKUs)
• Manufacturer Part Number: 14437-6

Fits 2009+ Nissan R35 GT-R models equipped with the VR38DETT engine.

Manley Turbo Tuff I-Beam Connecting Rods are engineered to handle the extreme cylinder pressures of high-boost and high-horsepower applications where factory components reach their limits. Manufactured from forged 4340 vacuum degassed steel alloy, the I-beam design provides maximum structural rigidity and resistance to bending or twisting during high-RPM operation.

Every rod undergoes a rigorous manufacturing process, including shot-peening to increase fatigue life and magnetic particle inspection (MPI) to ensure the material is free of flaws. These rods are a direct performance upgrade for the R35 platform, providing the bottom-end strength necessary for serious engine builds.

• Manufacturer Part Number: 14424-6
• Material: Forged 4340 Vacuum Degassed Steel
• Design: Turbo Tuff I-Beam
• Quantity: Set of 6 Rods
• Finish: Shot-peened for improved fatigue strength
• Inspection: Magnetic Particle Inspected (MPI)
• Application: Specifically for Nissan R35 GT-R VR38DETT engines

Fits 1992-2001 Nissan Skyline (2.6L RB26DETT).

Manley Turbo Tuff Pro Series I-Beam connecting rods are engineered to withstand the extreme cylinder pressures and RPMs found in high-output RB26DETT builds. Forged from vacuum degassed steel alloys, including 4340 or 300M depending on the specific application requirements, these rods are designed for ultimate structural integrity. Each rod undergoes a meticulous manufacturing process, including precision shot peening to increase fatigue strength and ensure long-term reliability under heavy boost.

• Manufacturer Part Number: 14411-6
• Forged from high-strength 4340 or 300M vacuum degassed steel alloy
• Signature Turbo Tuff I-Beam design for maximum rigidity
• Shot-peened to improve fatigue life and stress resistance
• NHRA Legal Certification for Stock and Super Stock (select SKUs)
• Comprehensive set designed for the Nissan 2.6L RB26DETT engine

Fits 1992-2005 Lexus GS300, IS300, SC300, and Toyota Supra (3.0L). This Manley Turbo Tuff Pro Series I-Beam connecting rod set is engineered for extreme performance in high-horsepower turbocharged applications. Known as the 2JAG series, these rods are specifically designed to withstand the immense cylinder pressures of forced induction builds where factory components fail.

Constructed from forged 4340 or 300M vacuum degassed steel alloys, these rods undergo a meticulous manufacturing process to ensure structural integrity and precision tolerances. The I-Beam design provides superior resistance to bending and twisting, making them essential for high-boost 2JZ engine configurations. Whether building a street-performance machine or a dedicated drag car, these rods offer the reliability required for ultimate power gains.

• Manufacturer Part Number: 14402-6
• Series: Turbo Tuff Pro Series I-Beam (2JAG)
• Material: Forged 4340 or 300M vacuum degassed steel alloy
• Design: Heavy-duty I-Beam for maximum rigidity
• Fitment: 3.0L Lexus GS/IS/SC300 and Toyota Supra (1992-2005)
• Certification: NHRA Legal for select Stock and Super Stock classes

Fits Ford 3.5L and 3.7L EcoBoost engines. This Manley H-Beam Series connecting rod set is engineered to handle the increased cylinder pressures and higher RPM demands of high-performance turbocharged builds. Forged with precision, these rods are manufactured to the same rigorous standards as Manley's premium Sportsmaster and Pro Series lines, offering a critical internal upgrade for engines pushing beyond factory output limits.

Every rod is meticulously finished to exacting tolerances, including precise big-end and small-end honing. Manley pays strict attention to bend and twist alignment to ensure long-term engine reliability. This set is equipped with upgraded ARP 2000 cap screws, providing superior tensile strength and clamping force over standard 8740 hardware for maximum peace of mind under high-stress conditions.

• Manufacturer Part Number: 14082R-6
• Rod Length: 6.011 in
• Wrist Pin Diameter: 0.9063 in
• Fastener Type: ARP 2000 cap screws
• Series: Manley H-Beam
• Application: Ford 3.5L / 3.7L EcoBoost

Fits 2009-Present BMW models equipped with N55 and S55 engines.

Manley H-Beam Series connecting rods provide a high-strength foundation for performance BMW N55 and S55 engine builds. Engineered to the same rigorous quality standards as Manley’s Sportsmaster and Pro Series, these rods offer a reliable upgrade for high-performance street and track applications. Each rod is manufactured from high-strength forged material and finished to exacting tolerances to handle the increased cylinder pressures of forced induction.

Precision is critical in the N55/S55 rotating assembly; Manley ensures every rod in this set meets strict requirements for final hone size, thread detail, bend, and twist. These rods are designed to be paired with high-tensile ARP 8740 or ARP 2000 hardware, providing the clamping force necessary for high-RPM reliability.

• Manufacturer Part Number: 14079-6
• Rod Design: H-Beam
• Center-to-Center Length: 5.683 in
• Engine Fitment: BMW N55, S55 (3.0L Inline-6)
• Hardware Compatibility: Designed for ARP 8740 or ARP 2000 bolts
• Finish: Precision honed and inspected for structural alignment

Fits 2006-2016 BMW models equipped with the N54B30 3.0L twin-turbo inline-six engine.

Manley H-Beam Series connecting rods are engineered to provide a high-strength, reliable alternative to factory rods for high-performance BMW N54 builds. These rods are manufactured to the same exacting standards as Manley's premium Sportsmaster and Pro Series components, ensuring a high-quality finish at an economical price point. Each rod is meticulously inspected for final hone size, thread detail, bend, and twist to ensure precision alignment and consistent bearing clearance.

• Center-to-Center Length: 5.709 in
• Design: H-Beam for optimized strength and weight
• Manufacturing: Precision finished to exacting tolerances
• Hardware: Compatible with high-tensile ARP 8740 or ARP 2000 bolt options
• Fitment: Specifically designed for the BMW N54B30 engine block
• Manufacturer Part Number: 14078-6

Fits 1991-2002 Nissan RB25DE, RB25DET, and RB26DETT engines with a stock 21mm wrist pin.

Manley H-Beam Series connecting rods provide a high-strength, precision-engineered solution for Nissan RB-series performance builds. Manufactured to the same rigorous standards as the Manley Sportsmaster and Pro Series, these rods are designed to handle increased cylinder pressures while maintaining dimensional stability under load. Every rod is meticulously finished to ensure that the final hone size, thread detail, bend, and twist are held to exacting tolerances for a drop-in fit and long-term reliability.

• Engineered for Strength: Crafted to provide exceptional durability for high-revving and boosted applications.
• Precision Finishing: Every rod is inspected for thread detail, bend, and twist to meet tight tolerances.
• High-Quality Hardware: Features premium ARP 8740 or ARP 2000 fasteners for superior cap retention and clamping force.
• Technical Specifications: Optimized for stock 21mm wrist pin diameters.
• MPN: 14028-6

Fits 1992-2005 Lexus GS300, IS300, SC300, and Toyota Supra (3.0L 2JZ-GE / 2JZ-GTE).

Manley H-Beam Series connecting rods provide a high-strength, precision-engineered upgrade for 2JZ engines at an economical price point. Designed for high-performance applications, these rods are manufactured to the same rigorous standards as Manley’s Sportsmaster and Pro Series lines. Each rod is meticulously finished to exacting tolerances, ensuring consistent hone size, thread detail, and minimal bend or twist for reliable operation under increased cylinder pressures.

• Forged from high-strength material for superior durability over OE components
• H-beam design optimized for weight-to-strength ratio
• Meticulously finished to ensure precision fitment and performance
• Capable of utilizing ARP 8740 or ARP 2000 bolt options
• Engineered to handle the demands of track and forced induction setups
• Manufacturer Part Number: 14027-6

Fits select 2001-2010 Nissan and Infiniti models including 350Z, Altima, Maxima, G35, and FX35 equipped with the VQ35DE engine.

Manley H-Beam Series connecting rods provide a high-strength, precision-engineered solution for VQ35DE performance builds. Positioned as a superior choice that balances quality and value, the H-Beam Series is manufactured to the same exacting standards as Manley’s renowned Sportsmaster and Pro Series rods. Every rod undergoes meticulous finishing to ensure precise big-end hone sizes and strict tolerances for bend and twist.

Designed to withstand the stresses of high-RPM use and increased cylinder pressures, these rods feature an H-beam profile for an optimal strength-to-weight ratio. They are engineered to provide a competitive advantage on the track while maintaining the reliability required for high-performance street applications. For maximum assembly security, these rods are compatible with high-quality ARP 8740 or ARP 2000 fasteners.

• Manufacturer Part Number: 14019-6
• Engine Application: Nissan/Infiniti VQ35DE / VQ35DET
• Design: H-Beam profile for superior structural integrity
• Hardware Options: Compatible with ARP 8740 or ARP 2000 bolts
• Finish: Precision honed and aligned to exacting tolerances
• Fitment: Replaces factory connecting rods in select 2001-2010 V6 3.5L applications

Fits select 1992-2010 Audi and Volkswagen vehicles, including VR6-equipped models such as the Corrado SLC, Golf GTI VR6, R32, A3 Quattro, and TT Quattro.

Engineered for high-performance and competition use, these Eagle H-Beam connecting rods provide the structural integrity required for increased power levels. Each rod is manufactured from a two-piece forged 4340 steel process to ensure superior grain flow and durability. The surfaces are fully machined and shot-peened to eliminate stress risers and improve fatigue life, while sizing is held to exacting tolerances for a precise fit on the crankshaft journals.

This set of six comes as a weight-matched assembly, reducing engine vibration and ensuring consistent balance across all cylinders. To handle the increased tensile loads of high-RPM or forced induction applications, these rods are equipped with premium ARP 2000 bolts.

• Manufacturer Part Number: CRS6457V13D
• Material: Forged 4340 Steel
• Design: H-Beam with two-piece forging
• Hardware: ARP 2000 cap screws included
• Quantity: Set of 6 matched rods
• Finish: Fully machined and shot-peened

Fits select 1984-1998 Nissan and Infiniti models (including 300ZX, Maxima, and J30) equipped with the VG30 engine series. This set of 6 Eagle Specialty Products H-beam connecting rods is engineered for high-performance builds and competition environments where increased horsepower and RPM demand superior tensile strength.

Manufactured from a two-piece 4340 steel forging, these rods undergo a rigorous manufacturing process to ensure reliability. Each rod is fully machined and shot-peened to reduce surface stress and improve fatigue life. To maintain engine balance and reduce vibration, these rods are delivered as a weight-matched set with sizing held to extremely tight tolerances. This kit (MPN: CRS6071N3D) comes equipped with genuine ARP 2000 bolts, providing the clamping force necessary for forced induction or high-compression naturally aspirated setups.

• Material: Forged 4340 Chromoly Steel
• Design: H-Beam profile for maximum rigidity
• Hardware: Includes high-tensile ARP 2000 rod bolts
• Finish: Fully machined and shot-peened
• Quantity: Set of 6 (weight-matched)
• Part Number: CRS6071N3D

Fits 1986-1992 Toyota Supra and Cressida models equipped with the 7M-GTE engine.

Eagle Specialty Products H-Beam connecting rods are designed for competition-level performance and high-horsepower applications. These rods are manufactured from two-piece 4340 forged steel, providing a significant strength advantage over factory components. Each rod is fully machined and shot-peened to increase fatigue life and relieve surface stress, ensuring reliability under extreme cylinder pressures.

To maintain rotating assembly balance, these rods are delivered as a weight-matched set. They come equipped with premium ARP 2000 bolts, offering the clamping force necessary for high-RPM and turbocharged builds.

• Material: Forged 4340 Steel
• Design: H-Beam
• Hardware: Included ARP 2000 Bolts
• Surface Treatment: Shot-peened and fully machined
• Quantity: Set of 6 rods
• Manufacturer Part Number: CRS5984T3D

Designed for high-output Nissan VQ37 engines, this set of Eagle Specialty Products H-Beam connecting rods provides the structural integrity required for competition use. These rods are manufactured from a two-piece 4340 steel forging to ensure superior grain flow and material density compared to standard cast components.

Each rod undergoes a comprehensive machining process and is shot-peened to increase fatigue life and reduce stress risers. To ensure rotating assembly balance and reliable performance at high RPM, these rods are sold as a weight-matched set and held to exacting sizing tolerances. This kit comes equipped with high-strength ARP 2000 bolts, significantly increasing the assembly's power-handling capability.

• Engine Fitment: Nissan VQ37
• Material: Forged 4340 Steel
• Design: H-Beam
• Hardware: ARP 2000 Bolts
• Quantity: Set of 6
• Manufacturing: Fully machined and shot-peened
• Manufacturer Part Number: CRS5886N3D

Fits select 2001-2010 Nissan and Infiniti models (VQ35DE) including 350Z, Altima, Maxima, G35, and FX35. See compatibility list for full details.

Engineered for high-stress competition environments, Eagle H-Beam connecting rods provide the structural integrity required for increased horsepower and RPM. Each rod is forged from 4340 chromoly steel and undergoes an extensive two-piece forging process followed by a thorough shot-peening treatment to improve fatigue life and eliminate stress risers. These rods are precision-machined to exacting tolerances and delivered as a weight-matched set, ensuring engine balance and smooth operation under heavy load.

To handle the increased cylinder pressures of performance builds, this set is equipped with ARP 2000 rod bolts, offering superior tensile strength over standard hardware. These are the ideal choice for forced induction or high-revving naturally aspirated VQ35DE builds.

• Material: Forged 4340 Chromoly Steel
• Design: H-Beam
• Hardware: ARP 2000 Bolts included
• Surface Finish: Fully machined and shot-peened
• Quantity: Weight-matched set of 6
• Manufacturer Part Number: CRS5680N3D

Fits select 1992-2005 Lexus GS300, IS300, SC300, and Toyota Supra models equipped with 2JZ-GE or 2JZ-GTE engines.

These Eagle Specialty Products H-Beam connecting rods are engineered for the high-stress environment of competition and high-horsepower street builds. Each rod is manufactured from a two-piece 4340 steel forging to ensure superior grain flow and structural integrity. The rods undergo an extensive manufacturing process, including full machining and shot-peening to reduce stress risers and improve fatigue life. Sizing is held to extremely tight tolerances for consistent oil clearance and bearing fitment.

This set comes equipped with ARP 2000 rod bolts, providing significantly higher tensile strength and clamping force compared to standard hardware. Each set is weight-matched to ensure rotating assembly balance and smooth engine operation at high RPM.

• Material: Forged 4340 Steel
• Design: H-Beam
• Hardware: ARP 2000 3/8-inch Bolts
• Finish: Fully machined and shot-peened surface
• Quantity: Matched set of 6
• Manufacturer Part Number: CRS5590T3D

Fits Nissan RB26 engines.

Eagle Specialty Products H-beam connecting rods are engineered for the high-stress requirements of competition engines. Each rod is manufactured from a two-piece 4340 forged steel process, ensuring superior grain flow and structural integrity. The surfaces are fully machined and shot-peened to eliminate stress risers and enhance fatigue resistance under high-load conditions.

This set is equipped with high-strength ARP 2000 bolts to increase clamping force and support higher power levels. For consistent performance and simplified balancing, these rods are delivered as a weight-matched set held to exacting tolerances.

• Manufacturer Part Number: CRS4783N3D
• Material: Forged 4340 Steel
• Design: H-Beam
• Hardware: Genuine ARP 2000 bolts included
• Surface Finish: Fully machined and shot-peened
• Configuration: Weight-matched set of 6

Fits 2009-2014 Nissan GT-R (VR38DETT).

Engineered to handle the extreme cylinder pressures of high-horsepower VR38DETT builds, the Carrillo Pro-H connecting rods are the industry standard for durability and precision. These H-beam rods are forged from a proprietary steel alloy, providing a superior strength-to-weight ratio that is essential for high-RPM stability and forced induction applications. This set is equipped with premium 3/8" CARR bolts, high-tensile fasteners designed specifically to resist stretching and failure under heavy loads.

• Manufacturer Part Number: SCR5451-6
• Rod Design: Pro-H Beam for maximum rigidity
• Fasteners: High-performance 3/8" CARR bolts included
• Application: Specifically balanced for the Nissan VR38DETT engine
• Material: Forged proprietary steel alloy

Fits select BMW and Toyota models equipped with the B58 engine.

Engineered for high-output B58 builds, this set of six Carrillo Pro-H connecting rods provides the structural integrity required for forced induction and high-RPM applications. The Pro-H beam design is a signature Carrillo architecture, optimized to handle increased cylinder pressures while maintaining a balance of weight and strength. These rods come equipped with 3/8" WMC bolts, which are high-standard fasteners designed to prevent rod cap stretching under extreme loads.

• Manufacturer Part Number: SCR13492-6
• Series: Pro-H
• Center-to-Center Length: 5.828 in
• Fastener Type: 3/8 in WMC Bolt
• Engine Compatibility: BMW / Toyota B58
• Quantity: Set of 6 Rods

Fits Toyota B58B30 engines.

Brian Crower MOAR (Maximum Output Action Rod) series I-beam connecting rods are engineered for extreme performance applications where maximum structural integrity is required. These rods feature a robust I-beam profile designed to withstand the immense cylinder pressures associated with high-horsepower forced induction and high-RPM B58 builds.

The BC6325 kit comes equipped with premium ARP Custom Age 625+ fasteners. These bolts offer significantly higher tensile strength than standard ARP2000 hardware, providing the necessary clamping force and fatigue resistance for the most demanding racing environments.

• Manufacturer Part Number: BC6325
• Series: MOAR I-Beam
• Center-to-Center Length: 5.834in
• Fasteners: ARP Custom Age 625+
• Engine Application: Toyota B58B30
• Construction: High-strength forged alloy