Our new LOW PROFILE DRILL Hardware Kit is available for select late model fullsize trucks. These require you to drill two holes through the top of the bed rail for installation. If you must have the Toolbox sitting at bed rail height this is the option. Four carriage head bolts secure the assembly allowing you to place the Toolbox at a low profile using existing clamps that came with the Toolbox. Drill if you must. Not compatible with TONNEAU COVER ADAPTER Brackets.

• Low Profile Hardware Kit

This Part Fits:

TONNEAU COVER ADAPTORS BACKRACK(TM) does not make Tonneau Covers but we have created an accessory called the Tonneau Cover Adaptor Kit (TCA). This kit allows you to install certain types of Tonneau Covers with BACKRACK(TM) and Safety Rack Cab Guards. CLAMP TO THE RAIL TONNEAU COVERS Backrack(TM) Cab Guards sit on the bed rail at the front of the truck bed, over the front Stake Pockets. Tonneau Covers that encroach on this area are generally not compatible with BACKRACK(TM) products. Certain Tonneau Cover manufacturers clamp their covers to the inside rail of the truck bed, exposing the area above the Stake Pockets. These type of Tonneau Covers are compatible with BACKRACK(TM) Cab Guards. HOW DO THE TONNEAU COVER ADAPTORS WORK? The TCAs simply lift your BACKRACK(TM) Cab Guard up by one or two inches depending on your trucks make, model and year. BACKRACK(TM) Cab Guards need that increase in height to clear the Tonneau Cover. The TCAs also include extended Stake Pocket Bolts (SPBs) to replace the SPBs that came with your BACKRACK(TM) Cab Guard originally. These extended SPBs are required to accommodate the increased height. IS YOUR TONNEAU COVER COMPATIBLE? We have created a Tonneau Cover Compatibility Chart listing covers that are compatible with BACKRACK(TM) Cab Guards. Before purchasing a Tonneau Cover, be sure to refer to this Chart. Click on the icon above to view. Some covers may require slight modification and are listed on the Chart along with the fully compatible and incompatible Tonneau Covers.

• Tonneau Cover Adaptor

This Part Fits:

Replaces Standard Railmount Hardware. Allows Toolbox to be installed flush against BackRack(TM). Eliminates gap between Toolbox and Backrack. Allows Toolbox to be installed without drilling into truck bed. Standard 21 inches. Optional 31 inches available.

• Includes Two Toolbox Brackets
• Durable Powdercoat Finish
• Limited Lifetime Warranty

This Part Fits:

Light Bar Bracket clamps to horizontal tube assembly, provides base to sit light bar on and can be drilled and bolted directly to face of uprights if desired. Bracket places light bar base even with tops of upright posts and the clamping installation is suitable for Backrack only. Holes punched in L Brackets (may require drilling to fasten certain light bars). Includes one pair of heavy L Brackets and fasteners.

• No Drilling Required To Install Bracket to Backrack
• Comes With Two L Brackets
• Durable Powdercoat Finish
• Limited Lifetime Warranty

Replaces Standard Railmount Hardware. Allows Toolbox to be installed flush against Backrack. Eliminates gap between Toolbox and Backrack Allows Toolbox to be installed without drilling into truck bed. Standard 21". Optional 31" available.

• Mounts to Pre-punched Holes in Backrack Uprights
• Pre-Drilled Holes For Wire In Mounting Plate
• Great For Mounting GOLIGHT Brand Spot Lights
• Ideal For Mounting Strobe Lights
• Durable Powdercoat Finish
• Limited Lifetime Warranty

Replaces Standard Railmount Hardware. Allows Toolbox to be installed flush against Backrack. Eliminates gap between Toolbox and Backrack Allows Toolbox to be installed without drilling into truck bed. Standard 21". Optional 31" available.

• Mounts to Pre-punched Holes in Backrack Uprights
• Pre-Drilled Holes For Wire In Mounting Plate
• Great For Mounting GOLIGHT Brand Spot Lights
• Ideal For Mounting Strobe Lights
• Available in Black or White
• Durable Powdercoat Finish
• Limited Lifetime Warranty

BACKRACK(TM) products are manufactured exclusively in North America at our Oakville, Ontario manufacturing facility. Outsourcing jobs offshore is not part of our corporate culture. We feel that in order to control quality and maximize efficiency, a hands-on approach to manufacturing must be followed. Some of our competitors design or copy products and hand them off to a third-party manufacturer to add to their assortment of products. At BACKRACK(TM), we have been manufacturing quality truck racks since 1988. We have focused on our core product line and, as a result, our processes are lean and efficient. This has enabled BACKRACK(TM) to offer competitive pricing, superior quality, and fast turnaround times for our dealers and distributors. We are emotionally invested in our products, our company, and our reputation. When third party manufacturers build products, that level of commitment is lost. BACKRACK(TM) products are available wherever truck accessories are sold across North America. With warehouse locations in Ontario, New York, and California, our product is never far from where you need it. Our extensive network of Distributors and Dealers ensure that BACKRACK(TM) products are available for installation on your truck immediately or, within a few days. Be sure to ask for BACKRACK(TM) products by name and please, don't be fooled by cheap imitations. Only BACKRACK(TM) products have the BACKRACK(TM) trademark on the product.

• Tonneau Cover Hardware Kit

This Part Fits:

BACKRACK(TM) products are manufactured exclusively in North America at our Oakville, Ontario manufacturing facility. Outsourcing jobs offshore is not part of our corporate culture. We feel that in order to control quality and maximize efficiency, a hands-on approach to manufacturing must be followed. Some of our competitors design or copy products and hand them off to a third-party manufacturer to add to their assortment of products. At BACKRACK(TM), we have been manufacturing quality truck racks since 1988. We have focused on our core product line and, as a result, our processes are lean and efficient. This has enabled BACKRACK(TM) to offer competitive pricing, superior quality, and fast turnaround times for our dealers and distributors. We are emotionally invested in our products, our company, and our reputation. When third party manufacturers build products, that level of commitment is lost. BACKRACK(TM) products are available wherever truck accessories are sold across North America. With warehouse locations in Ontario, New York, and California, our product is never far from where you need it. Our extensive network of Distributors and Dealers ensure that BACKRACK(TM) products are available for installation on your truck immediately or, within a few days. Be sure to ask for BACKRACK(TM) products by name and please, don't be fooled by cheap imitations. Only BACKRACK(TM) products have the BACKRACK(TM) trademark on the product.

• Tonneau Cover Hardware Kit

This Part Fits:

Replaces Standard Railmount Hardware. Allows Toolbox to be installed flush against BackRack(TM). Eliminates gap between Toolbox and Backrack. Allows Toolbox to be installed without drilling into truck bed. Standard 21 inches.

• Tonneau Cover Hardware Kit

This Part Fits:

Used For Mounting Safety Rack frames. Can Be Used As Replacement BackRack(TM) Hardware. Includes Rail Plates/Neoprene Strips And Instructions. Hardware is Yellow Zinc Plated. Brackets Are Powder Coated. Limited Lifetime Warranty.

• Incl. Rail Plates/Neoprene Strips And Instructions
• Can Be Used As Replacement Backrack Hardware
• Used For Mounting Safety Rack frames
• Hardware is Yellow Zinc Plated
• Brackets Are Powder Coated
• Limited Lifetime Warranty

This Part Fits:

Used For Mounting Safety Rack frames. Can Be Used As Replacement BackRack(TM) Hardware. Includes Rail Plates/Neoprene Strips And Instructions. Hardware is Yellow Zinc Plated. Brackets Are Powder Coated. Limited Lifetime Warranty.

• Incl. Rail Plates/Neoprene Strips And Instructions
• Can Be Used As Replacement Backrack Hardware
• Used For Mounting Safety Rack frames
• Hardware is Yellow Zinc Plated
• Brackets Are Powder Coated
• Limited Lifetime Warranty

This Part Fits:

SERIOUS STRENGTH: We get it. You do not want Siderails that try to look tough but have no purpose. BACKRACK(TM) Siderails are industrial grade and designed for trucks that push the envelope of on-the-job abuse. Heavy gauge HRPO tube is fully welded to an angular base that runs the full length of your truck bed. We expect you to overload your truck. BACKRACK(TM) Siderails are ready to handle whatever you bring to the job site. RUGGED GOOD LOOKS: If it wears the BACKRACK(TM) brand name it has to be work ready, but it can still look good while getting the job done. BACKRACK(TM) Siderails are designed to compliment the angles of our Cab Guards. Siderails install with or without our Cab Guards and are fully compatible with Crossbed Toolboxes. SIMPLE NO DRILL INSTALLATION: Drop them on and bolt them in. It is almost that simple. Once you secure the custom Stake Pocket Bolts into the stake holes, the Siderails drop into the pockets over the bolts. Turn down the nuts with a ratchet, and finish the installation by inserting the plastic caps inside the stake holes to hide all the fasteners. Very slick. TOOLBOX FRIENDLY: BACKRACK(TM) Siderails are available for both 6.5 ft and 8 ft bed lengths. The Tube Rail is available in two configurations: the FULL RAIL, which extends the full length of the truck bed and the TOOLBOX RAIL, where the Tube Rail stops short to accommodate the insertion of a cross bed Toolbox.

• Works w/ Or w/o Backrack/Safety Rack
• Industrial Grade Quality/Strength
• Designed For Working Trucks
• Works w/ Or w/o Toolboxes
• No Drill Installation

This Part Fits:

Used For Mounting Safety Rack frames. Can Be Used As Replacement BackRack(TM) Hardware. Includes Rail Plates/Neoprene Strips And Instructions. Hardware is Yellow Zinc Plated. Brackets Are Powder Coated. Limited Lifetime Warranty.

• Incl. Rail Plates/Neoprene Strips And Instructions
• Can Be Used As Replacement Backrack Hardware
• Used For Mounting Safety Rack frames
• Hardware is Yellow Zinc Plated
• Brackets Are Powder Coated
• Limited Lifetime Warranty

This Part Fits:

Used For Mounting Safety Rack frames. Can Be Used As Replacement BackRack(TM) Hardware. Includes Rail Plates/Neoprene Strips And Instructions. Hardware is Yellow Zinc Plated. Brackets Are Powder Coated. Limited Lifetime Warranty.

• Incl. Rail Plates/Neoprene Strips And Instructions
• Can Be Used As Replacement Backrack Hardware
• Used For Mounting Safety Rack frames
• Hardware is Yellow Zinc Plated
• Brackets Are Powder Coated
• Limited Lifetime Warranty

This Part Fits:

Used For Mounting Safety Rack frames. Can Be Used As Replacement BackRack(TM) Hardware. Includes Rail Plates/Neoprene Strips And Instructions. Hardware is Yellow Zinc Plated. Brackets Are Powder Coated. Limited Lifetime Warranty.

• Incl. Rail Plates/Neoprene Strips And Instructions
• Can Be Used As Replacement Backrack Hardware
• Used For Mounting Safety Rack frames
• Hardware is Yellow Zinc Plated
• Brackets Are Powder Coated
• Limited Lifetime Warranty

This Part Fits:

Used For Mounting Safety Rack frames. Can Be Used As Replacement BackRack(TM) Hardware. Includes Rail Plates/Neoprene Strips And Instructions. Hardware is Yellow Zinc Plated. Brackets Are Powder Coated. Limited Lifetime Warranty.

• Incl. Rail Plates/Neoprene Strips And Instructions
• Can Be Used As Replacement Backrack Hardware
• Used For Mounting Safety Rack frames
• Hardware is Yellow Zinc Plated
• Brackets Are Powder Coated
• Limited Lifetime Warranty

This Part Fits:

Used For Mounting Safety Rack frames. Can Be Used As Replacement BackRack(TM) Hardware. Includes Rail Plates/Neoprene Strips And Instructions. Hardware is Yellow Zinc Plated. Brackets Are Powder Coated. Limited Lifetime Warranty.

• Incl. Rail Plates/Neoprene Strips And Instructions
• Can Be Used As Replacement Backrack Hardware
• Used For Mounting Safety Rack frames
• Hardware is Yellow Zinc Plated
• Brackets Are Powder Coated
• Limited Lifetime Warranty

This Part Fits:

Back Rack Cab Guard by BackRack(TM). BackRack's cab guard protectors mount to existing stake pockets at the front of your bed to protect your cab from damage caused by large, heavy cargo that may shift forward. For cargo such as small pipework, the "Safety Rack" comes with a welded criss-cross center grid to give you the most complete protection. Reinforced steel construction ensures high strength and rigidity, and a protective layer of black powder coat resists scratches, chips, and corrosion.

• Reinforced Steel Frame Tubing Offers Maximum Strength Rigidity
• Protects Your Trucks Cab and Rear Window
• Durable Black Powder Coat Finish
• 1 Year Manufacturer Warranty

This Part Fits:

Back Rack Cab Guard by BackRack(TM). BackRack's cab guard protectors mount to existing stake pockets at the front of your bed to protect your cab from damage caused by large, heavy cargo that may shift forward. For cargo such as small pipework, the "Safety Rack" comes with a welded criss-cross center grid to give you the most complete protection. Reinforced steel construction ensures high strength and rigidity, and a protective layer of black powder coat resists scratches, chips, and corrosion.

• Reinforced Steel Frame Tubing Offers Maximum Strength Rigidity
• Protects Your Trucks Cab and Rear Window
• Durable Black Powder Coat Finish
• 1 Year Manufacturer Warranty

This Part Fits:

Back Rack Cab Guard by BackRack(TM). BackRack's cab guard protectors mount to existing stake pockets at the front of your bed to protect your cab from damage caused by large, heavy cargo that may shift forward. For cargo such as small pipework, the "Safety Rack" comes with a welded criss-cross center grid to give you the most complete protection. Reinforced steel construction ensures high strength and rigidity, and a protective layer of black powder coat resists scratches, chips, and corrosion.

• Reinforced Steel Frame Tubing Offers Maximum Strength Rigidity
• Protects Your Trucks Cab and Rear Window
• Durable Black Powder Coat Finish
• 1 Year Manufacturer Warranty

This Part Fits:

BACKRACK(TM) has doubled the corrosion resistance on the Louvered Rack by E-Coating the Frame before Powder Coating. Being unsatisfied with the Powder coverage in tight areas of the Louver assembly, BACKRACK(TM) does it right by immersing the entire Frame into a multi stage dip process to cover every hidden surface.

• E Coated Under Powder Coat For Double Corrosion Protection
• Toolbox Compatible With Toolbox Hardware
• No Drill Installation
• Die Cut HRPO Louvers

This Part Fits: