Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Welcome to Atlus Automotive
Main menu
-
Performance
- Performance
-
Intake & Exhaust
- Intake & Exhaust
- Air Intake Systems
- Cold Air Intakes
- Air Intake Components
- Air Filters
- Air Filters - Drop In
- Air Filters - Direct Fit
- Air Filters - Universal Fit
- Pre-Filters
- Recharge Kits
- OE Replacement Air Intake Components
- Exhaust, Mufflers & Tips
- Catback
- Axle Back
- Muffler
- Tips
- Headers & Manifolds
- Connecting Pipes
- Catalytic Converter Direct Fit
- Catalytic Converter Universal
- Exhaust Collector
- Merge Collectors
-
Engine Upgrades
- Engine Upgrades
- Engine Components
- Camshafts
- Valve Springs, Retainers
- Head Gaskets
- Head Stud & Bolt Kits
- Main Stud & Bolt Kits
- Gasket Kits
- Engine Mounts
- Oil Catch Cans
- Oil Separators
- Throttle Bodies
- Throttle Body Spacers
- Crankshaft Dampers
- Valves
- Piston Rings
- Piston Sets - Forged - 4cyl
- Piston Sets - Cast - 4cyl
- Connecting Rods - 4Cyl
- Rotating Assemblies
- Stroker Kits
-
Turbo & Cooling
-
Fuel, Ignition & Tuning
-
Suspension & Handling
- Suspension & Handling
-
Lowering & Coilovers
-
Arms, Links & Alignment
-
Lift & Off-Road Suspension
-
Chassis & Bracing
-
Wheels & Tires
- Wheels & Tires
-
Wheels
-
Tires
-
Drivetrain & Clutch
-
Brakes
- Brakes
-
Pads & Rotors
-
Brake Kits & Calipers
-
Lines, Fluid & Hardware
-
Exterior & Lighting
- Exterior & Lighting
-
Lighting
-
Exterior Styling
-
Bumpers & Protection
-
Interior & Electronics
- Interior & Electronics
-
Interior Upgrades
-
Gauges & Electronics
-
Audio & Safety
-
Overland & Utility
- Overland & Utility
-
Bed Covers & Bed Gear
-
Steps, Racks & Storage
-
Trail & Towing
-
Maintenance & Garage
- Maintenance & Garage
-
Oil, Fluids & Filters
-
Detailing & Car Care
-
Tools & Fabrication
Your cart
Choose your Location
-
Atlus
1340 Cobb Dr, Unit 1, Eustis, FL 32736
352-234-4458
Mon – Fri: 8:30 am – 4:30 pm
Sat: 9:00 am – 2:00 pm
Sun: Closed
Product Comparison
How they are Different
|
__ __ |
|
|---|---|
| Description |
Description - __ |
| Rating |
Rating - __ |
| Vendor |
Vendor - __ |
| Color |
Color - __ |
|
|
Compare products ( / )
243 products
243 products
Sort by:
- Featured
- Most relevant
- Best selling
- Alphabetically, A-Z
- Alphabetically, Z-A
- Price, low to high
- Price, high to low
- Date, old to new
- Date, new to old
Stop damage before it starts with the lowest profile design on the market. The Husky Aeroskin(R) Hood Protector gives you a skin-tight fit to the contours of your hood with no-quit protection against chips, rocks, bugs, and anything the road kicks up. Plus, that sleek, aerodynamic custom touch that'll turn heads. Installation is a snap---no drilling and no special hardware required. Mounts in minutes with 3M(TM) automotive-grade adhesive, protects for life. Available in smoke and chrome and proudly made in the USA with global materials.
Installation Instructions- Husky Aeroskin(R) gives you the lowest profile protection available today for that sleek, better-than-factory custom look.
- Husky Aeroskin[R] Gives You The Lowest Profile Protection Available Today For That Sleek/Better-Than-Factory Custom Look
- Custom-molded for a skin-tight fit that matches the contours of your hood. Adds a sleek, custom look to your ride.
- Custom-Molded For A Skin-Tight Fit That Matches The Contours Of Your Hood/Adds A Sleek/Custom Look To Your Ride
- The Husky Aeroskin(R) is constructed with nail-tough acrylic for unstoppable protection your can count on.
- The Husky Aeroskin[R] Is Constructed With Nail-Tough Acrylic For Unstoppable Protection Your Can Count On
- Available in dark smoke finish for a perfect complement to virtually any vehicle.
- Available In Dark Smoke Finish For A Perfect Complement To Virtually Any Vehicle
- Mounts in minutes with 3M(TM) automotive-grade adhesive tape (included).
- Mounts In Minutes With 3M[TM] Automotive-Grade Adhesive Tape [Included]
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Toyota | Land Cruiser | 1958 |
| 2024-2026 | Toyota | Land Cruiser | Base |
| 2024 | Toyota | Land Cruiser | First Edition |
Stop damage before it starts with the lowest profile design on the market. The Husky Aeroskin(R) Hood Protector gives you a skin-tight fit to the contours of your hood with no-quit protection against chips, rocks, bugs, and anything the road kicks up. Plus, that sleek, aerodynamic custom touch that'll turn heads. Installation is a snap---no drilling and no special hardware required. Mounts in minutes with 3M(TM) automotive-grade adhesive, protects for life. Available in smoke and chrome and proudly made in the USA with global materials.
Installation Instructions- Husky Aeroskin(R) gives you the lowest profile protection available today for that sleek, better-than-factory custom look.
- Husky Aeroskin[R] Gives You The Lowest Profile Protection Available Today For That Sleek/Better-Than-Factory Custom Look
- Custom-molded for a skin-tight fit that matches the contours of your hood. Adds a sleek, custom look to your ride.
- Custom-Molded For A Skin-Tight Fit That Matches The Contours Of Your Hood/Adds A Sleek/Custom Look To Your Ride
- The Husky Aeroskin(R) is constructed with nail-tough acrylic for unstoppable protection your can count on.
- The Husky Aeroskin[R] Is Constructed With Nail-Tough Acrylic For Unstoppable Protection Your Can Count On
- Available in dark smoke finish for a perfect complement to virtually any vehicle.
- Available In Dark Smoke Finish For A Perfect Complement To Virtually Any Vehicle
- Mounts in minutes with 3M(TM) automotive-grade adhesive tape (included).
- Mounts In Minutes With 3M[TM] Automotive-Grade Adhesive Tape [Included]
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2026 | GMC | Sierra EV | AT4 |
| 2025-2026 | GMC | Sierra EV | Denali |
| 2024 | GMC | Sierra EV | Denali Edition 1 |
| 2026 | GMC | Sierra EV | Elevation |
Stop damage before it starts with the lowest profile design on the market. The Husky Aeroskin(R) Hood Protector gives you a skin-tight fit to the contours of your hood with no-quit protection against chips, rocks, bugs, and anything the road kicks up. Plus, that sleek, aerodynamic custom touch that'll turn heads. Installation is a snap---no drilling and no special hardware required. Mounts in minutes with 3M(TM) automotive-grade adhesive, protects for life. Available in smoke and chrome and proudly made in the USA with global materials.
Installation Instructions- Husky Aeroskin(R) gives you the lowest profile protection available today for that sleek, better-than-factory custom look.
- Husky Aeroskin[R] Gives You The Lowest Profile Protection Available Today For That Sleek/Better-Than-Factory Custom Look
- Custom-molded for a skin-tight fit that matches the contours of your hood. Adds a sleek, custom look to your ride.
- Custom-Molded For A Skin-Tight Fit That Matches The Contours Of Your Hood/Adds A Sleek/Custom Look To Your Ride
- The Husky Aeroskin(R) is constructed with nail-tough acrylic for unstoppable protection your can count on.
- The Husky Aeroskin[R] Is Constructed With Nail-Tough Acrylic For Unstoppable Protection Your Can Count On
- Available in dark smoke finish for a perfect complement to virtually any vehicle.
- Available In Dark Smoke Finish For A Perfect Complement To Virtually Any Vehicle
- Mounts in minutes with 3M(TM) automotive-grade adhesive tape (included).
- Mounts In Minutes With 3M[TM] Automotive-Grade Adhesive Tape [Included]
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2022-2026 | Hyundai | Santa Cruz | Limited |
| 2023-2024 | Hyundai | Santa Cruz | Night |
| 2022-2026 | Hyundai | Santa Cruz | SE |
| 2022-2026 | Hyundai | Santa Cruz | SEL |
| 2025-2026 | Hyundai | Santa Cruz | SEL Activity |
| 2022-2023 | Hyundai | Santa Cruz | SEL Premium |
| 2024-2026 | Hyundai | Santa Cruz | XRT |
Stop damage before it starts with the lowest profile design on the market. The Husky Aeroskin(R) Hood Protector gives you a skin-tight fit to the contours of your hood with no-quit protection against chips, rocks, bugs, and anything the road kicks up. Plus, that sleek, aerodynamic custom touch that'll turn heads. Installation is a snap---no drilling and no special hardware required. Mounts in minutes with 3M(TM) automotive-grade adhesive, protects for life. Available in smoke and chrome and proudly made in the USA with global materials.
Installation Instructions- Husky Aeroskin(R) gives you the lowest profile protection available today for that sleek, better-than-factory custom look.
- Husky Aeroskin[R] Gives You The Lowest Profile Protection Available Today For That Sleek/Better-Than-Factory Custom Look
- Custom-molded for a skin-tight fit that matches the contours of your hood. Adds a sleek, custom look to your ride.
- Custom-Molded For A Skin-Tight Fit That Matches The Contours Of Your Hood/Adds A Sleek/Custom Look To Your Ride
- The Husky Aeroskin(R) is constructed with nail-tough acrylic for unstoppable protection your can count on.
- The Husky Aeroskin[R] Is Constructed With Nail-Tough Acrylic For Unstoppable Protection Your Can Count On
- Available in dark smoke finish for a perfect complement to virtually any vehicle.
- Available In Dark Smoke Finish For A Perfect Complement To Virtually Any Vehicle
- Mounts in minutes with 3M(TM) automotive-grade adhesive tape (included).
- Mounts In Minutes With 3M[TM] Automotive-Grade Adhesive Tape [Included]
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Kia | K5 | EX |
| 2021-2026 | Kia | K5 | GT |
| 2021-2026 | Kia | K5 | GT-Line |
| 2021-2022 | Kia | K5 | LX |
| 2021-2026 | Kia | K5 | LXS |
Stop damage before it starts with the lowest profile design on the market. The Husky Aeroskin(R) Hood Protector gives you a skin-tight fit to the contours of your hood with no-quit protection against chips, rocks, bugs, and anything the road kicks up. Plus, that sleek, aerodynamic custom touch that'll turn heads. Installation is a snap---no drilling and no special hardware required. Mounts in minutes with 3M(TM) automotive-grade adhesive, protects for life. Available in smoke and chrome and proudly made in the USA with global materials.
Installation Instructions- Husky Aeroskin(R) gives you the lowest profile protection available today for that sleek, better-than-factory custom look.
- Husky Aeroskin[R] Gives You The Lowest Profile Protection Available Today For That Sleek/Better-Than-Factory Custom Look
- Custom-molded for a skin-tight fit that matches the contours of your hood. Adds a sleek, custom look to your ride.
- Custom-Molded For A Skin-Tight Fit That Matches The Contours Of Your Hood/Adds A Sleek/Custom Look To Your Ride
- The Husky Aeroskin(R) is constructed with nail-tough acrylic for unstoppable protection your can count on.
- The Husky Aeroskin[R] Is Constructed With Nail-Tough Acrylic For Unstoppable Protection Your Can Count On
- Available in dark smoke finish for a perfect complement to virtually any vehicle.
- Available In Dark Smoke Finish For A Perfect Complement To Virtually Any Vehicle
- Mounts in minutes with 3M(TM) automotive-grade adhesive tape (included).
- Mounts In Minutes With 3M[TM] Automotive-Grade Adhesive Tape [Included]
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2015-2019 | GMC | Sierra 2500 HD | Base |
| 2015-2019 | GMC | Sierra 2500 HD | Denali |
| 2015-2019 | GMC | Sierra 2500 HD | SLE |
| 2015-2019 | GMC | Sierra 2500 HD | SLT |
| 2015-2019 | GMC | Sierra 3500 HD | Base |
| 2015-2019 | GMC | Sierra 3500 HD | Denali |
| 2015-2019 | GMC | Sierra 3500 HD | SLE |
| 2015-2019 | GMC | Sierra 3500 HD | SLT |
Stop damage before it starts with the lowest profile design on the market. The Husky Aeroskin(R) Hood Protector gives you a skin-tight fit to the contours of your hood with no-quit protection against chips, rocks, bugs, and anything the road kicks up. Plus, that sleek, aerodynamic custom touch that'll turn heads. Installation is a snap---no drilling and no special hardware required. Mounts in minutes with 3M(TM) automotive-grade adhesive, protects for life. Available in smoke and chrome and proudly made in the USA with global materials.
Installation Instructions- Husky Aeroskin(R) gives you the lowest profile protection available today for that sleek, better-than-factory custom look.
- Husky Aeroskin[R] Gives You The Lowest Profile Protection Available Today For That Sleek/Better-Than-Factory Custom Look
- Custom-molded for a skin-tight fit that matches the contours of your hood. Adds a sleek, custom look to your ride.
- Custom-Molded For A Skin-Tight Fit That Matches The Contours Of Your Hood/Adds A Sleek/Custom Look To Your Ride
- The Husky Aeroskin(R) is constructed with nail-tough acrylic for unstoppable protection your can count on.
- The Husky Aeroskin[R] Is Constructed With Nail-Tough Acrylic For Unstoppable Protection Your Can Count On
- Available in dark smoke finish for a perfect complement to virtually any vehicle.
- Available In Dark Smoke Finish For A Perfect Complement To Virtually Any Vehicle
- Mounts in minutes with 3M(TM) automotive-grade adhesive tape (included).
- Mounts In Minutes With 3M[TM] Automotive-Grade Adhesive Tape [Included]
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2022 | Honda | CR-V | EX |
| 2017-2022 | Honda | CR-V | EX-L |
| 2020-2022 | Honda | CR-V | Hybrid EX |
| 2020-2022 | Honda | CR-V | Hybrid EX-L |
| 2020 | Honda | CR-V | Hybrid LX |
| 2020-2022 | Honda | CR-V | Hybrid Touring |
| 2017-2022 | Honda | CR-V | LX |
| 2021-2022 | Honda | CR-V | Special Edition |
| 2017-2022 | Honda | CR-V | Touring |
Give your truck's hood, windshield, and roofline a tough line of defense from damage with our highest-profile hood shield. The tall, wrap-around design stands up to rocks, bugs, and other road debris with impact-resistant acrylic construction, and off-the-hood positioning makes cleaning by hand or at the carwash a breeze. Designed to look sharp, with a glossy, dark smoke finish that won't fade or crack, thanks to the built-in UV resistance. Plus, the Husky Liners(R) Hood Shield's contour-fit design follows the lines of your truck's hood for a precision look. It's maximum front-end coverage that's ready for anything. Proudly made in the USA with global materials.
Installation Instructions- Hood Shields are covered by Husky Liners Limited Lifetime Warranty, featuring Husky's legendary durability, so they're built to last. Proudly made in the USA with global materials
- Features a precision design that sits just far enough off the hood to make hand-washing a breeze. Also cleans off easily in the carwash.
- Precision, contour-fit design follows the lines of your truck's hood for tough protection that looks like it was made for your truck.
- Tough, impact-resistant acrylic construction prevents dents and scratches. Won't fade or crack, thanks to built-in UV coating.
- Hood Shields Are Covered By Husky Liners Limited Lifetime Warranty/Featuring Huskys Legendary Durability
- Features A Precision Design That Sits Just Far Enough Off The Hood To Make Hand-Washing A Breeze
- Tough/Impact-Resistant Acrylic Construction Prevents Dents And Scratches/Wont Fade Or Crack
- Husky's highest-profile design gives you the most protection for your hood and windshield.
- Huskys Highest-Profile Design Gives You The Most Protection For Your Hood And Windshield
- So They Are Built To Last/Proudly Made In The USA With Global Materials
- Precision/Contour-Fit Design Follows The Lines Of Your Trucks Hood
- For Tough Protection That Looks Like It Was Made For Your Truck
- Also Cleans Off Easily In The Carwash
- Thanks To Built-In UV Coating
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 1990-1995 | Toyota | 4Runner | SR5 |
| 1989-1995 | Toyota | Pickup | Base |
| 1989-1995 | Toyota | Pickup | DLX |
| 1989-1995 | Toyota | Pickup | SR5 |
$59.49
Give your truck's hood, windshield, and roofline a tough line of defense from damage with our highest-profile hood shield. The tall, wrap-around design stands up to rocks, bugs, and other road debris with impact-resistant acrylic construction, and off-the-hood positioning makes cleaning by hand or at the carwash a breeze. Designed to look sharp, with a glossy, dark smoke finish that won't fade or crack, thanks to the built-in UV resistance. Plus, the Husky Liners(R) Hood Shield's contour-fit design follows the lines of your truck's hood for a precision look. It's maximum front-end coverage that's ready for anything. Proudly made in the USA with global materials.
Installation Instructions- Hood Shields are covered by Husky Liners Limited Lifetime Warranty, featuring Husky's legendary durability, so they're built to last. Proudly made in the USA with global materials
- Features a precision design that sits just far enough off the hood to make hand-washing a breeze. Also cleans off easily in the carwash.
- Precision, contour-fit design follows the lines of your truck's hood for tough protection that looks like it was made for your truck.
- Tough, impact-resistant acrylic construction prevents dents and scratches. Won't fade or crack, thanks to built-in UV coating.
- Hood Shields Are Covered By Husky Liners Limited Lifetime Warranty/Featuring Huskys Legendary Durability
- Features A Precision Design That Sits Just Far Enough Off The Hood To Make Hand-Washing A Breeze
- Tough/Impact-Resistant Acrylic Construction Prevents Dents And Scratches/Wont Fade Or Crack
- Husky's highest-profile design gives you the most protection for your hood and windshield.
- Huskys Highest-Profile Design Gives You The Most Protection For Your Hood And Windshield
- So They Are Built To Last/Proudly Made In The USA With Global Materials
- Precision/Contour-Fit Design Follows The Lines Of Your Trucks Hood
- For Tough Protection That Looks Like It Was Made For Your Truck
- Also Cleans Off Easily In The Carwash
- Thanks To Built-In UV Coating
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 1996-2001 | Toyota | 4Runner | Base |
| 1996-2002 | Toyota | 4Runner | Limited |
| 1996-2002 | Toyota | 4Runner | SR5 |
$186.99
Stop damage before it starts with the lowest profile design on the market. The Husky AeroskinA(R) Hood Protector gives you a skin-tight fit to the contours of your hood with no-quit protection against chips, rocks, bugs, and anything the road kicks up. Plus, that sleek, aerodynamic custom touch that'll turn heads. Installation is a snap---no drilling and no special hardware required. Mounts in minutes with 3Ma,,c automotive-grade adhesive, protects for life. Available in dark smoke finish and proudly made in the USA with global materials.
Installation Instructions- Husky Aeroskin(R) gives you the lowest profile protection available today for that sleek, better-than-factory custom look.
- Husky Aeroskin[R] Gives You The Lowest Profile Protection Available Today For That Sleek/Better-Than-Factory Custom Look
- Custom-molded for a skin-tight fit that matches the contours of your hood. Adds a sleek, custom look to your ride.
- Custom-Molded For A Skin-Tight Fit That Matches The Contours Of Your Hood/Adds A Sleek/Custom Look To Your Ride
- The Husky Aeroskin(R) is constructed with nail-tough acrylic for unstoppable protection your can count on.
- The Husky Aeroskin[R] Is Constructed With Nail-Tough Acrylic For Unstoppable Protection Your Can Count On
- Available in chrome finish for a perfect complement to virtually any vehicle.
- Available In Chrome Finish For A Perfect Complement To Virtually Any Vehicle
- Mounts in minutes with 3M(TM) automotive-grade adhesive tape (included).
- Mounts In Minutes With 3M[TM] Automotive-Grade Adhesive Tape [Included]
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2019-2025 | Ram | 2500 | Big Horn |
| 2019-2025 | Ram | 2500 | Laramie |
| 2019-2021 | Ram | 2500 | Laramie Longhorn |
| 2019-2025 | Ram | 2500 | Limited |
| 2021-2025 | Ram | 2500 | Limited Longhorn |
| 2019-2025 | Ram | 2500 | Lone Star |
| 2024-2025 | Ram | 2500 | Special Service |
| 2019-2025 | Ram | 2500 | Tradesman |
| 2019-2025 | Ram | 3500 | Big Horn |
| 2019-2025 | Ram | 3500 | Laramie |
| 2019-2020 | Ram | 3500 | Laramie Longhorn |
| 2019-2025 | Ram | 3500 | Limited |
| 2021-2025 | Ram | 3500 | Limited Longhorn |
| 2019-2022 | Ram | 3500 | Lone Star |
| 2019-2024 | Ram | 3500 | SLT |
| 2024-2025 | Ram | 3500 | Special Service |
| 2019-2025 | Ram | 3500 | Tradesman |
$84.99
Stop damage before it starts with the lowest profile design on the market. The Husky Aeroskin(R) Hood Protector gives you a skin-tight fit to the contours of your hood with no-quit protection against chips, rocks, bugs, and anything the road kicks up. Plus, that sleek, aerodynamic custom touch that'll turn heads. Installation is a snap---no drilling and no special hardware required. Mounts in minutes with 3Ma,,c automotive-grade adhesive, protects for life. Available in matte black textured finish and proudly made in the USA with global materials.
Installation Instructions- Husky Aeroskin(R) gives you the lowest profile protection available today for that sleek, better-than-factory custom look.
- Husky Aeroskin[R] Gives You The Lowest Profile Protection Available Today For That Sleek/Better-Than-Factory Custom Look
- Custom-molded for a skin-tight fit that matches the contours of your hood. Adds a sleek, custom look to your ride.
- The Husky Aeroskin(R) is constructed with high-impact Dura-Flex(R) TPO construction for unstoppable protection.
- Custom-Molded For A Skin-Tight Fit That Matches The Contours Of Your Hood/Adds A Sleek/Custom Look To Your Ride
- The Husky Aeroskin[R] Is Constructed With High-Impact Dura-Flex[R] Tpo Construction For Unstoppable Protection
- Available In Dark Smoke Finish For A Perfect Complement To Virtually Any Vehicle
- Mounts in minutes with 3M(TM) automotive-grade adhesive tape (included).
- Mounts In Minutes With 3M[TM] Automotive-Grade Adhesive Tape [Included]
- Available in extra-tough textured matte-black finish.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2016-2018 | Chevrolet | Silverado 1500 | Custom |
| 2016-2018 | Chevrolet | Silverado 1500 | High Country |
| 2016-2018 | Chevrolet | Silverado 1500 | LS |
| 2016-2018 | Chevrolet | Silverado 1500 | LT |
| 2016-2018 | Chevrolet | Silverado 1500 | LTZ |
| 2016-2018 | Chevrolet | Silverado 1500 | SSV |
| 2016-2018 | Chevrolet | Silverado 1500 | WT |
| 2019 | Chevrolet | Silverado 1500 LD | Custom |
| 2019 | Chevrolet | Silverado 1500 LD | LT |
| 2019 | Chevrolet | Silverado 1500 LD | WT |
$84.99
Stop damage before it starts with the lowest profile design on the market. The Husky Aeroskin(R) Hood Protector gives you a skin-tight fit to the contours of your hood with no-quit protection against chips, rocks, bugs, and anything the road kicks up. Plus, that sleek, aerodynamic custom touch that'll turn heads. Installation is a snap---no drilling and no special hardware required. Mounts in minutes with 3Ma,,c automotive-grade adhesive, protects for life. Available in matte black textured finish and proudly made in the USA with global materials.
Installation Instructions- Husky Aeroskin(R) gives you the lowest profile protection available today for that sleek, better-than-factory custom look.
- Husky Aeroskin[R] Gives You The Lowest Profile Protection Available Today For That Sleek/Better-Than-Factory Custom Look
- Custom-molded for a skin-tight fit that matches the contours of your hood. Adds a sleek, custom look to your ride.
- The Husky Aeroskin(R) is constructed with high-impact Dura-Flex(R) TPO construction for unstoppable protection.
- Custom-Molded For A Skin-Tight Fit That Matches The Contours Of Your Hood/Adds A Sleek/Custom Look To Your Ride
- The Husky Aeroskin[R] Is Constructed With High-Impact Dura-Flex[R] Tpo Construction For Unstoppable Protection
- Available In Dark Smoke Finish For A Perfect Complement To Virtually Any Vehicle
- Mounts in minutes with 3M(TM) automotive-grade adhesive tape (included).
- Mounts In Minutes With 3M[TM] Automotive-Grade Adhesive Tape [Included]
- Available in extra-tough textured matte-black finish.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2015-2020 | Ford | F-150 | King Ranch |
| 2015-2020 | Ford | F-150 | Lariat |
| 2016-2020 | Ford | F-150 | Limited |
| 2015-2020 | Ford | F-150 | Platinum |
| 2018-2020 | Ford | F-150 | Police Responder |
| 2016-2020 | Ford | F-150 | SSV |
| 2015-2020 | Ford | F-150 | XL |
| 2015-2020 | Ford | F-150 | XLT |
$76.49
Stop damage before it starts with the lowest profile design on the market. The Husky AeroskinA(R) Hood Protector gives you a skin-tight fit to the contours of your hood with no-quit protection against chips, rocks, bugs, and anything the road kicks up. Plus, that sleek, aerodynamic custom touch that'll turn heads. Installation is a snap---no drilling and no special hardware required. Mounts in minutes with 3Ma,,c automotive-grade adhesive, protects for life. Available in dark smoke finish and proudly made in the USA with global materials.
Installation Instructions- Husky Aeroskin(R) gives you the lowest profile protection available today for that sleek, better-than-factory custom look.
- Husky Aeroskin[R] Gives You The Lowest Profile Protection Available Today For That Sleek/Better-Than-Factory Custom Look
- Custom-molded for a skin-tight fit that matches the contours of your hood. Adds a sleek, custom look to your ride.
- Custom-Molded For A Skin-Tight Fit That Matches The Contours Of Your Hood/Adds A Sleek/Custom Look To Your Ride
- The Husky Aeroskin(R) is constructed with nail-tough acrylic for unstoppable protection your can count on.
- The Husky Aeroskin[R] Is Constructed With Nail-Tough Acrylic For Unstoppable Protection Your Can Count On
- Available in dark smoke finish for a perfect complement to virtually any vehicle.
- Available In Dark Smoke Finish For A Perfect Complement To Virtually Any Vehicle
- Mounts in minutes with 3M(TM) automotive-grade adhesive tape (included).
- Mounts In Minutes With 3M[TM] Automotive-Grade Adhesive Tape [Included]
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2025-2026 | Toyota | 4Runner | Limited |
| 2025-2026 | Toyota | 4Runner | Platinum |
| 2025-2026 | Toyota | 4Runner | SR5 |
| 2025-2026 | Toyota | 4Runner | Trailhunter |
| 2025-2026 | Toyota | 4Runner | TRD Off-Road |
| 2025-2026 | Toyota | 4Runner | TRD Off-Road Premium |
| 2025-2026 | Toyota | 4Runner | TRD Pro |
| 2025-2026 | Toyota | 4Runner | TRD Sport |
| 2025-2026 | Toyota | 4Runner | TRD Sport Premium |
| 2024-2026 | Toyota | Tacoma | Limited |
| 2024-2026 | Toyota | Tacoma | SR |
| 2024-2026 | Toyota | Tacoma | SR5 |
| 2024-2026 | Toyota | Tacoma | Trailhunter |
| 2024-2026 | Toyota | Tacoma | TRD Off-Road |
| 2024-2026 | Toyota | Tacoma | TRD PreRunner |
| 2024-2026 | Toyota | Tacoma | TRD Pro |
| 2024-2026 | Toyota | Tacoma | TRD Sport |
$67.99
Stop damage before it starts with the lowest profile design on the market. The Husky Aeroskin(R) Hood Protector gives you a skin-tight fit to the contours of your hood with no-quit protection against chips, rocks, bugs, and anything the road kicks up. Plus, that sleek, aerodynamic custom touch that'll turn heads. Installation is a snap---no drilling and no special hardware required. Mounts in minutes with 3M(TM) automotive-grade adhesive, protects for life. Available in smoke and chrome and proudly made in the USA with global materials.
Installation Instructions- Husky Aeroskin(R) gives you the lowest profile protection available today for that sleek, better-than-factory custom look.
- Husky Aeroskin[R] Gives You The Lowest Profile Protection Available Today For That Sleek/Better-Than-Factory Custom Look
- Custom-molded for a skin-tight fit that matches the contours of your hood. Adds a sleek, custom look to your ride.
- Custom-Molded For A Skin-Tight Fit That Matches The Contours Of Your Hood/Adds A Sleek/Custom Look To Your Ride
- The Husky Aeroskin(R) is constructed with nail-tough acrylic for unstoppable protection your can count on.
- The Husky Aeroskin[R] Is Constructed With Nail-Tough Acrylic For Unstoppable Protection Your Can Count On
- Available in dark smoke finish for a perfect complement to virtually any vehicle.
- Available In Dark Smoke Finish For A Perfect Complement To Virtually Any Vehicle
- Mounts in minutes with 3M(TM) automotive-grade adhesive tape (included).
- Mounts In Minutes With 3M[TM] Automotive-Grade Adhesive Tape [Included]
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2023 | Ford | Mustang Mach-E | California Route 1 |
| 2021 | Ford | Mustang Mach-E | First Edition |
| 2021-2025 | Ford | Mustang Mach-E | GT |
| 2021-2025 | Ford | Mustang Mach-E | Premium |
| 2024-2025 | Ford | Mustang Mach-E | Rally |
| 2021-2025 | Ford | Mustang Mach-E | Select |
$84.99
Stop damage before it starts with the lowest profile design on the market. The Husky Aeroskin(R) Hood Protector gives you a skin-tight fit to the contours of your hood with no-quit protection against chips, rocks, bugs, and anything the road kicks up. Plus, that sleek, aerodynamic custom touch that'll turn heads. Installation is a snap---no drilling and no special hardware required. Mounts in minutes with 3M(TM) automotive-grade adhesive, protects for life. Available in smoke and chrome and proudly made in the USA with global materials.
Installation Instructions- Husky Aeroskin(R) gives you the lowest profile protection available today for that sleek, better-than-factory custom look.
- Husky Aeroskin[R] Gives You The Lowest Profile Protection Available Today For That Sleek/Better-Than-Factory Custom Look
- Custom-molded for a skin-tight fit that matches the contours of your hood. Adds a sleek, custom look to your ride.
- Custom-Molded For A Skin-Tight Fit That Matches The Contours Of Your Hood/Adds A Sleek/Custom Look To Your Ride
- The Husky Aeroskin(R) is constructed with nail-tough acrylic for unstoppable protection your can count on.
- The Husky Aeroskin[R] Is Constructed With Nail-Tough Acrylic For Unstoppable Protection Your Can Count On
- Available in dark smoke finish for a perfect complement to virtually any vehicle.
- Available In Dark Smoke Finish For A Perfect Complement To Virtually Any Vehicle
- Mounts in minutes with 3M(TM) automotive-grade adhesive tape (included).
- Mounts In Minutes With 3M[TM] Automotive-Grade Adhesive Tape [Included]
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2019 | Chevrolet | Silverado 2500 HD | High Country |
| 2017-2019 | Chevrolet | Silverado 2500 HD | LT |
| 2017-2019 | Chevrolet | Silverado 2500 HD | LTZ |
| 2017-2019 | Chevrolet | Silverado 2500 HD | WT |
| 2017-2019 | Chevrolet | Silverado 3500 HD | High Country |
| 2017-2019 | Chevrolet | Silverado 3500 HD | LT |
| 2017-2019 | Chevrolet | Silverado 3500 HD | LTZ |
| 2017-2019 | Chevrolet | Silverado 3500 HD | WT |
$84.99
Stop damage before it starts with the lowest profile design on the market. The Husky Aeroskin(R) Hood Protector gives you a skin-tight fit to the contours of your hood with no-quit protection against chips, rocks, bugs, and anything the road kicks up. Plus, that sleek, aerodynamic custom touch that'll turn heads. Installation is a snap---no drilling and no special hardware required. Mounts in minutes with 3M(TM) automotive-grade adhesive, protects for life. Available in smoke and chrome and proudly made in the USA with global materials.
Installation Instructions- Husky Aeroskin(R) gives you the lowest profile protection available today for that sleek, better-than-factory custom look.
- Husky Aeroskin[R] Gives You The Lowest Profile Protection Available Today For That Sleek/Better-Than-Factory Custom Look
- Custom-molded for a skin-tight fit that matches the contours of your hood. Adds a sleek, custom look to your ride.
- Custom-Molded For A Skin-Tight Fit That Matches The Contours Of Your Hood/Adds A Sleek/Custom Look To Your Ride
- The Husky Aeroskin(R) is constructed with nail-tough acrylic for unstoppable protection your can count on.
- The Husky Aeroskin[R] Is Constructed With Nail-Tough Acrylic For Unstoppable Protection Your Can Count On
- Available in dark smoke finish for a perfect complement to virtually any vehicle.
- Available In Dark Smoke Finish For A Perfect Complement To Virtually Any Vehicle
- Mounts in minutes with 3M(TM) automotive-grade adhesive tape (included).
- Mounts In Minutes With 3M[TM] Automotive-Grade Adhesive Tape [Included]
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2015-2020 | Ford | F-150 | King Ranch |
| 2015-2020 | Ford | F-150 | Lariat |
| 2016-2020 | Ford | F-150 | Limited |
| 2015-2020 | Ford | F-150 | Platinum |
| 2018-2020 | Ford | F-150 | Police Responder |
| 2016-2020 | Ford | F-150 | SSV |
| 2015-2020 | Ford | F-150 | XL |
| 2015-2020 | Ford | F-150 | XLT |
$76.49
Stop damage before it starts with the lowest profile design on the market. The Husky Aeroskin(R) Hood Protector gives you a skin-tight fit to the contours of your hood with no-quit protection against chips, rocks, bugs, and anything the road kicks up. Plus, that sleek, aerodynamic custom touch that'll turn heads. Installation is a snap---no drilling and no special hardware required. Mounts in minutes with 3M(TM) automotive-grade adhesive, protects for life. Available in smoke and chrome and proudly made in the USA with global materials.
Installation Instructions- Husky Aeroskin(R) gives you the lowest profile protection available today for that sleek, better-than-factory custom look.
- Husky Aeroskin[R] Gives You The Lowest Profile Protection Available Today For That Sleek/Better-Than-Factory Custom Look
- Custom-molded for a skin-tight fit that matches the contours of your hood. Adds a sleek, custom look to your ride.
- Custom-Molded For A Skin-Tight Fit That Matches The Contours Of Your Hood/Adds A Sleek/Custom Look To Your Ride
- The Husky Aeroskin(R) is constructed with nail-tough acrylic for unstoppable protection your can count on.
- The Husky Aeroskin[R] Is Constructed With Nail-Tough Acrylic For Unstoppable Protection Your Can Count On
- Available in dark smoke finish for a perfect complement to virtually any vehicle.
- Available In Dark Smoke Finish For A Perfect Complement To Virtually Any Vehicle
- Mounts in minutes with 3M(TM) automotive-grade adhesive tape (included).
- Mounts In Minutes With 3M[TM] Automotive-Grade Adhesive Tape [Included]
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2013-2016 | Ford | Escape | S |
| 2013-2016 | Ford | Escape | SE |
| 2013 | Ford | Escape | SEL |
| 2013-2016 | Ford | Escape | Titanium |
$84.99
Stop damage before it starts with the lowest profile design on the market. The Husky Aeroskin(R) Hood Protector gives you a skin-tight fit to the contours of your hood with no-quit protection against chips, rocks, bugs, and anything the road kicks up. Plus, that sleek, aerodynamic custom touch that'll turn heads. Installation is a snap---no drilling and no special hardware required. Mounts in minutes with 3M(TM) automotive-grade adhesive, protects for life. Available in smoke and chrome and proudly made in the USA with global materials.
Installation Instructions- Husky Aeroskin(R) gives you the lowest profile protection available today for that sleek, better-than-factory custom look.
- Husky Aeroskin[R] Gives You The Lowest Profile Protection Available Today For That Sleek/Better-Than-Factory Custom Look
- Custom-molded for a skin-tight fit that matches the contours of your hood. Adds a sleek, custom look to your ride.
- Custom-Molded For A Skin-Tight Fit That Matches The Contours Of Your Hood/Adds A Sleek/Custom Look To Your Ride
- The Husky Aeroskin(R) is constructed with nail-tough acrylic for unstoppable protection your can count on.
- The Husky Aeroskin[R] Is Constructed With Nail-Tough Acrylic For Unstoppable Protection Your Can Count On
- Available in dark smoke finish for a perfect complement to virtually any vehicle.
- Available In Dark Smoke Finish For A Perfect Complement To Virtually Any Vehicle
- Mounts in minutes with 3M(TM) automotive-grade adhesive tape (included).
- Mounts In Minutes With 3M[TM] Automotive-Grade Adhesive Tape [Included]
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2005-2011 | Toyota | Tacoma | Base |
| 2005-2011 | Toyota | Tacoma | Pre Runner |
| 2005-2011 | Toyota | Tacoma | X-Runner |
$67.99
Stop damage before it starts with the lowest profile design on the market. The Husky Aeroskin(R) Hood Protector gives you a skin-tight fit to the contours of your hood with no-quit protection against chips, rocks, bugs, and anything the road kicks up. Plus, that sleek, aerodynamic custom touch that'll turn heads. Installation is a snap---no drilling and no special hardware required. Mounts in minutes with 3M(TM) automotive-grade adhesive, protects for life. Available in smoke and chrome and proudly made in the USA with global materials.
Installation Instructions- Husky Aeroskin(R) gives you the lowest profile protection available today for that sleek, better-than-factory custom look.
- Husky Aeroskin[R] Gives You The Lowest Profile Protection Available Today For That Sleek/Better-Than-Factory Custom Look
- Custom-molded for a skin-tight fit that matches the contours of your hood. Adds a sleek, custom look to your ride.
- Custom-Molded For A Skin-Tight Fit That Matches The Contours Of Your Hood/Adds A Sleek/Custom Look To Your Ride
- The Husky Aeroskin(R) is constructed with nail-tough acrylic for unstoppable protection your can count on.
- The Husky Aeroskin[R] Is Constructed With Nail-Tough Acrylic For Unstoppable Protection Your Can Count On
- Available in dark smoke finish for a perfect complement to virtually any vehicle.
- Available In Dark Smoke Finish For A Perfect Complement To Virtually Any Vehicle
- Mounts in minutes with 3M(TM) automotive-grade adhesive tape (included).
- Mounts In Minutes With 3M[TM] Automotive-Grade Adhesive Tape [Included]
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2020-2025 | Nissan | Sentra | S |
| 2020-2025 | Nissan | Sentra | SR |
| 2020-2025 | Nissan | Sentra | SV |
$67.99
Stop damage before it starts with the lowest profile design on the market. The Husky Aeroskin(R) Hood Protector gives you a skin-tight fit to the contours of your hood with no-quit protection against chips, rocks, bugs, and anything the road kicks up. Plus, that sleek, aerodynamic custom touch that'll turn heads. Installation is a snap---no drilling and no special hardware required. Mounts in minutes with 3M(TM) automotive-grade adhesive, protects for life. Available in smoke and chrome and proudly made in the USA with global materials.
Installation Instructions- Husky Aeroskin(R) gives you the lowest profile protection available today for that sleek, better-than-factory custom look.
- Husky Aeroskin[R] Gives You The Lowest Profile Protection Available Today For That Sleek/Better-Than-Factory Custom Look
- Custom-molded for a skin-tight fit that matches the contours of your hood. Adds a sleek, custom look to your ride.
- Custom-Molded For A Skin-Tight Fit That Matches The Contours Of Your Hood/Adds A Sleek/Custom Look To Your Ride
- The Husky Aeroskin(R) is constructed with nail-tough acrylic for unstoppable protection your can count on.
- The Husky Aeroskin[R] Is Constructed With Nail-Tough Acrylic For Unstoppable Protection Your Can Count On
- Available in dark smoke finish for a perfect complement to virtually any vehicle.
- Available In Dark Smoke Finish For A Perfect Complement To Virtually Any Vehicle
- Mounts in minutes with 3M(TM) automotive-grade adhesive tape (included).
- Mounts In Minutes With 3M[TM] Automotive-Grade Adhesive Tape [Included]
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2013-2015 | Hyundai | Santa Fe | GLS |
| 2013-2017 | Hyundai | Santa Fe | Limited |
| 2017-2018 | Hyundai | Santa Fe | Limited Ultimate |
| 2016-2018 | Hyundai | Santa Fe | SE |
| 2017-2018 | Hyundai | Santa Fe | SE Ultimate |
$67.99
Stop damage before it starts with the lowest profile design on the market. The Husky Aeroskin(R) Hood Protector gives you a skin-tight fit to the contours of your hood with no-quit protection against chips, rocks, bugs, and anything the road kicks up. Plus, that sleek, aerodynamic custom touch that'll turn heads. Installation is a snap---no drilling and no special hardware required. Mounts in minutes with 3M(TM) automotive-grade adhesive, protects for life. Available in smoke and chrome and proudly made in the USA with global materials.
Installation Instructions- Husky Aeroskin(R) gives you the lowest profile protection available today for that sleek, better-than-factory custom look.
- Husky Aeroskin[R] Gives You The Lowest Profile Protection Available Today For That Sleek/Better-Than-Factory Custom Look
- Custom-molded for a skin-tight fit that matches the contours of your hood. Adds a sleek, custom look to your ride.
- Custom-Molded For A Skin-Tight Fit That Matches The Contours Of Your Hood/Adds A Sleek/Custom Look To Your Ride
- The Husky Aeroskin(R) is constructed with nail-tough acrylic for unstoppable protection your can count on.
- The Husky Aeroskin[R] Is Constructed With Nail-Tough Acrylic For Unstoppable Protection Your Can Count On
- Available in dark smoke finish for a perfect complement to virtually any vehicle.
- Available In Dark Smoke Finish For A Perfect Complement To Virtually Any Vehicle
- Mounts in minutes with 3M(TM) automotive-grade adhesive tape (included).
- Mounts In Minutes With 3M[TM] Automotive-Grade Adhesive Tape [Included]
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2020 | Buick | Envision | Base |
| 2017-2020 | Buick | Envision | Essence |
| 2017-2020 | Buick | Envision | Preferred |
| 2016-2020 | Buick | Envision | Premium |
| 2019-2020 | Buick | Envision | Premium II |
$67.99
Stop damage before it starts with the lowest profile design on the market. The Husky Aeroskin(R) Hood Protector gives you a skin-tight fit to the contours of your hood with no-quit protection against chips, rocks, bugs, and anything the road kicks up. Plus, that sleek, aerodynamic custom touch that'll turn heads. Installation is a snap---no drilling and no special hardware required. Mounts in minutes with 3M(TM) automotive-grade adhesive, protects for life. Available in smoke and chrome and proudly made in the USA with global materials.
Installation Instructions- Husky Aeroskin(R) gives you the lowest profile protection available today for that sleek, better-than-factory custom look.
- Husky Aeroskin[R] Gives You The Lowest Profile Protection Available Today For That Sleek/Better-Than-Factory Custom Look
- Custom-molded for a skin-tight fit that matches the contours of your hood. Adds a sleek, custom look to your ride.
- Custom-Molded For A Skin-Tight Fit That Matches The Contours Of Your Hood/Adds A Sleek/Custom Look To Your Ride
- The Husky Aeroskin(R) is constructed with nail-tough acrylic for unstoppable protection your can count on.
- The Husky Aeroskin[R] Is Constructed With Nail-Tough Acrylic For Unstoppable Protection Your Can Count On
- Available in dark smoke finish for a perfect complement to virtually any vehicle.
- Available In Dark Smoke Finish For A Perfect Complement To Virtually Any Vehicle
- Mounts in minutes with 3M(TM) automotive-grade adhesive tape (included).
- Mounts In Minutes With 3M[TM] Automotive-Grade Adhesive Tape [Included]
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017 | Ford | C-Max | Energi SE |
| 2013-2016 | Ford | C-Max | Energi SEL |
| 2017 | Ford | C-Max | Energi Titanium |
| 2013-2018 | Ford | C-Max | Hybrid SE |
| 2013-2016 | Ford | C-Max | Hybrid SEL |
| 2017-2018 | Ford | C-Max | Hybrid Titanium |
$67.99
Stop damage before it starts with the lowest profile design on the market. The Husky Aeroskin(R) Hood Protector gives you a skin-tight fit to the contours of your hood with no-quit protection against chips, rocks, bugs, and anything the road kicks up. Plus, that sleek, aerodynamic custom touch that'll turn heads. Installation is a snap---no drilling and no special hardware required. Mounts in minutes with 3M(TM) automotive-grade adhesive, protects for life. Available in smoke and chrome and proudly made in the USA with global materials.
Installation Instructions- Husky Aeroskin(R) gives you the lowest profile protection available today for that sleek, better-than-factory custom look.
- Husky Aeroskin[R] Gives You The Lowest Profile Protection Available Today For That Sleek/Better-Than-Factory Custom Look
- Custom-molded for a skin-tight fit that matches the contours of your hood. Adds a sleek, custom look to your ride.
- Custom-Molded For A Skin-Tight Fit That Matches The Contours Of Your Hood/Adds A Sleek/Custom Look To Your Ride
- The Husky Aeroskin(R) is constructed with nail-tough acrylic for unstoppable protection your can count on.
- The Husky Aeroskin[R] Is Constructed With Nail-Tough Acrylic For Unstoppable Protection Your Can Count On
- Available in dark smoke finish for a perfect complement to virtually any vehicle.
- Available In Dark Smoke Finish For A Perfect Complement To Virtually Any Vehicle
- Mounts in minutes with 3M(TM) automotive-grade adhesive tape (included).
- Mounts In Minutes With 3M[TM] Automotive-Grade Adhesive Tape [Included]
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2012-2014 | Ford | Focus | Electric |
| 2012-2014 | Ford | Focus | S |
| 2012-2014 | Ford | Focus | SE |
| 2012 | Ford | Focus | SEL |
| 2013-2014 | Ford | Focus | ST |
| 2012-2014 | Ford | Focus | Titanium |
$67.99
Stop damage before it starts with the lowest profile design on the market. The Husky Aeroskin(R) Hood Protector gives you a skin-tight fit to the contours of your hood with no-quit protection against chips, rocks, bugs, and anything the road kicks up. Plus, that sleek, aerodynamic custom touch that'll turn heads. Installation is a snap---no drilling and no special hardware required. Mounts in minutes with 3M(TM) automotive-grade adhesive, protects for life. Available in smoke and chrome and proudly made in the USA with global materials.
Installation Instructions- Husky Aeroskin(R) gives you the lowest profile protection available today for that sleek, better-than-factory custom look.
- Husky Aeroskin[R] Gives You The Lowest Profile Protection Available Today For That Sleek/Better-Than-Factory Custom Look
- Custom-molded for a skin-tight fit that matches the contours of your hood. Adds a sleek, custom look to your ride.
- Custom-Molded For A Skin-Tight Fit That Matches The Contours Of Your Hood/Adds A Sleek/Custom Look To Your Ride
- The Husky Aeroskin(R) is constructed with nail-tough acrylic for unstoppable protection your can count on.
- The Husky Aeroskin[R] Is Constructed With Nail-Tough Acrylic For Unstoppable Protection Your Can Count On
- Available in dark smoke finish for a perfect complement to virtually any vehicle.
- Available In Dark Smoke Finish For A Perfect Complement To Virtually Any Vehicle
- Mounts in minutes with 3M(TM) automotive-grade adhesive tape (included).
- Mounts In Minutes With 3M[TM] Automotive-Grade Adhesive Tape [Included]
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2009-2010 | Toyota | Corolla | Base |
| 2009-2010 | Toyota | Corolla | LE |
| 2009-2010 | Toyota | Corolla | S |
| 2009-2010 | Toyota | Corolla | XLE |
| 2009-2010 | Toyota | Corolla | XRS |
$123.24
Put a stop to paint chips, cracked windshields, and nasty bug splatter with heavy-duty bug shield protection, PLUS the added functionality of the Aeroskin II Bug Shields signature raised lip. Even with the added protection, the design is made for a tight, factory-style fit that hugs the contours of your vehicle. Its easy to install and made for a lifetime of abuse with heavy-duty Dura-Flex TPO construction.
Installation Instructions- The Aeroskin(R) II is covered by Husky Liners Limited Lifetime Warranty. Featuring Husky's legendary durability, so it's built to last. Proudly made in the USA with global materials.
- The tight, factory-fit design hugs the contours of your vehicle for a low-profile look that beefs up protection and still blends seamlessly.
- Simple no-drill installation just takes a few minutes, with pre-installed 3M double-sided adhesive ready to prep, peel, and stick.
- Made with heavy-duty Dura-Flex TPO construction that features a UV coating so there's no warping, cracking, or discoloration.
- The signature raised lip adds an extra layer of protection against rocks, bugs, and debris for your paint and windshield.
- The Signature Raised Lip Adds An Extra Layer Of Protection Against Rocks/ Bugs And Debris For Your Paint And Windshield
- Made w/Heavy-Duty Dura-Flex TPO Construction That Features A UV Coating So Theres No Warping/Cracking Or Discoloration
- The Tight/Factory-Fit Design Hugs The Contours Of Your Vehicle For A Low-Profile Look
- With Pre-Installed 3M Double-Sided Adhesive Ready To Prep/Peel And Stick
- The Aeroskin[R] II Is Covered By Husky Liners Limited Lifetime Warranty
- Featuring Huskys Legendary Durability/So Its Built To Last
- Simple No-Drill Installation Just Takes A Few Minutes
- That Beefs Up Protection And Still Blends Seamlessly
- Proudly Made In The USA With Global Materials
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2022 | Ford | F-250 Super Duty | King Ranch |
| 2017-2022 | Ford | F-250 Super Duty | Lariat |
| 2018-2022 | Ford | F-250 Super Duty | Limited |
| 2017-2022 | Ford | F-250 Super Duty | Platinum |
| 2017-2022 | Ford | F-250 Super Duty | XL |
| 2017-2022 | Ford | F-250 Super Duty | XLT |
| 2017-2022 | Ford | F-350 Super Duty | King Ranch |
| 2017-2022 | Ford | F-350 Super Duty | Lariat |
| 2018-2022 | Ford | F-350 Super Duty | Limited |
| 2017-2022 | Ford | F-350 Super Duty | Platinum |
| 2017-2022 | Ford | F-350 Super Duty | XL |
| 2017-2022 | Ford | F-350 Super Duty | XLT |
$123.24
Put a stop to paint chips, cracked windshields, and nasty bug splatter with heavy-duty bug shield protection, PLUS the added functionality of the Aeroskin(R) II Bug Shield's signature raised lip. Even with the added protection, the design is made for a tight, factory-style fit that hugs the contours of your vehicle. It's easy to install and made for a lifetime of abuse with heavy-duty Dura-Flex TPO construction.
Installation Instructions- Husky Aeroskin(R) II gives you the lowest profile protection available today for that sleek, better-than-factory custom look.
- Custom-molded for a skin-tight fit that matches the contours of your hood. Adds a sleek, custom look to your ride.
- Custom-Molded For A Skin-Tight Fit That Matches The Contours Of Your Hood/Adds A Sleek/Custom Look To Your Ride
- The Husky Aeroskin II is constructed with high-impact Dura-Flex(R) TPO construction for unstoppable protection.
- The Husky Aeroskin II Is Constructed With High-Impact Dura-Flex[R] Tpo Construction For Unstoppable Protection
- Husky Aeroskin[R] II Gives You The Lowest Profile Protection Available Today For That Sleek
- Mounts in minutes with 3M(TM) automotive-grade adhesive tape (included).
- Mounts In Minutes With 3M[TM] Automotive-Grade Adhesive Tape [Included]
- Extra-tough textured matte-black finish.
- Extra-Tough Textured Matte-Black Finish
- Better-Than-Factory Custom Look
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2016-2023 | Toyota | Tacoma | Limited |
| 2016-2023 | Toyota | Tacoma | SR |
| 2016-2023 | Toyota | Tacoma | SR5 |
| 2021 | Toyota | Tacoma | Trail |
| 2023 | Toyota | Tacoma | Trail Special Edition |
| 2016-2023 | Toyota | Tacoma | TRD Off-Road |
| 2017-2023 | Toyota | Tacoma | TRD Pro |
| 2016-2023 | Toyota | Tacoma | TRD Sport |
$212.49
Give your vehicle upgraded visibility and superior protection with the Aeroskin(R) Lightshield(TM) PRO hood protector. Its five amber built-in LED running lights provide greater visibility and adds kinetic, visual cool factor while its form-fitting hood and window protection keeps bug and debris out of your way. Available in a textured matte-black finish and proudly made in the USA with global materials.
Installation Instructions- Aeroskin(R) Lightshield(R) PRO hood protectors are covered by Husky Liners Limited Lifetime Warranty, featuring Husky's legendary durability, so they're built to last. Proudly made in the USA with global materials.
- This hood shield features a fully integrated amber built-in LED lightbar with multiple light output sequences that sync up with your turn signals and lights.
- No-quit protection against chips, rocks, bugs, and anything the road kicks up. Tough-as-nails Dura-Flex(R) 2000 material, built to last.
- Engineered to fit your vehicle's exact year, make, and model and mount flush with the contours of your hood.
- No drilling or special hardware required. Includes 3M automotive-grade adhesive and everything you need.
- Engineered To Fit Your Vehicles Exact Year/Make And Model And Mount Flush With The Contours Of Your Hood
- No Drilling Or Special Hardware Required/Includes 3M Automotive-Grade Adhesive And Everything You Need
- With Multiple Light Output Sequences That Sync Up With Your Turn Signals And Lights
- No-Quit Protection Against Chips/Rocks Bugs And Anything The Road Kicks Up
- This Hood Shield Features A Fully Integrated Amber Built-In LED Lightbar
- Tough-As-Nails Dura-Flex[R] 2000 Material/ Built To Last
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021 | Jeep | Gladiator | 80th Anniversary |
| 2020,2022 | Jeep | Gladiator | Altitude |
| 2023 | Jeep | Gladiator | Freedom |
| 2021-2023 | Jeep | Gladiator | High Altitude |
| 2024-2025 | Jeep | Gladiator | High Tide |
| 2024 | Jeep | Gladiator | Jeep Beach |
| 2020 | Jeep | Gladiator | Launch Edition |
| 2020-2025 | Jeep | Gladiator | Mojave |
| 2024-2025 | Jeep | Gladiator | Mojave X |
| 2024-2025 | Jeep | Gladiator | NightHawk |
| 2020-2023 | Jeep | Gladiator | Overland |
| 2020-2025 | Jeep | Gladiator | Rubicon |
| 2024-2025 | Jeep | Gladiator | Rubicon X |
| 2020-2025 | Jeep | Gladiator | Sport |
| 2020-2025 | Jeep | Gladiator | Sport S |
| 2021-2025 | Jeep | Gladiator | Texas Trail |
| 2021-2025 | Jeep | Gladiator | Willys |
| 2021-2023 | Jeep | Gladiator | Willys Sport |
| 2021 | Jeep | Wrangler | 80th Anniversary |
| 2021,2023 | Jeep | Wrangler | Freedom |
| 2023 | Jeep | Wrangler | High Altitude |
| 2023-2025 | Jeep | Wrangler | High Altitude 4xe |
| 2023 | Jeep | Wrangler | High Tide |
| 2021 | Jeep | Wrangler | Islander |
| 2018-2026 | Jeep | Wrangler | Rubicon |
| 2023-2024,2026 | Jeep | Wrangler | Rubicon 392 |
| 2024-2025 | Jeep | Wrangler | Rubicon 392 Final Edition |
| 2023-2025 | Jeep | Wrangler | Rubicon 4xe |
| 2024-2026 | Jeep | Wrangler | Rubicon X |
| 2024-2025 | Jeep | Wrangler | Rubicon X 4xe |
| 2023-2026 | Jeep | Wrangler | Sahara |
| 2023-2025 | Jeep | Wrangler | Sahara 4xe |
| 2023 | Jeep | Wrangler | Sahara Altitude |
| 2018-2026 | Jeep | Wrangler | Sport |
| 2023 | Jeep | Wrangler | Sport Altitude |
| 2018-2026 | Jeep | Wrangler | Sport S |
| 2024-2025 | Jeep | Wrangler | Sport S 4xe |
| 2021 | Jeep | Wrangler | Unlimited 80th Anniversary |
| 2021 | Jeep | Wrangler | Unlimited Freedom |
| 2021-2022 | Jeep | Wrangler | Unlimited High Altitude |
| 2021-2022 | Jeep | Wrangler | Unlimited High Altitude 4xe |
| 2022 | Jeep | Wrangler | Unlimited High Tide |
| 2021 | Jeep | Wrangler | Unlimited Islander |
| 2018-2019 | Jeep | Wrangler | Unlimited Moab |
| 2018-2022 | Jeep | Wrangler | Unlimited Rubicon |
| 2021-2022 | Jeep | Wrangler | Unlimited Rubicon 392 |
| 2021-2022 | Jeep | Wrangler | Unlimited Rubicon 4xe |
| 2018-2022 | Jeep | Wrangler | Unlimited Sahara |
| 2021-2022 | Jeep | Wrangler | Unlimited Sahara 4xe |
| 2021-2022 | Jeep | Wrangler | Unlimited Sahara Altitude |
| 2018-2022 | Jeep | Wrangler | Unlimited Sport |
| 2021-2022 | Jeep | Wrangler | Unlimited Sport Altitude |
| 2018-2022 | Jeep | Wrangler | Unlimited Sport S |
| 2021-2022 | Jeep | Wrangler | Unlimited Willys |
| 2021-2022 | Jeep | Wrangler | Unlimited Willys Sport |
| 2021-2026 | Jeep | Wrangler | Willys |
| 2023-2025 | Jeep | Wrangler | Willys 4xe |
| 2021-2024 | Jeep | Wrangler | Willys Sport |
$59.49
Give your truck's hood, windshield, and roofline a tough line of defense from damage with our highest-profile hood shield. The tall, wrap-around design stands up to rocks, bugs, and other road debris with impact-resistant acrylic construction, and off-the-hood positioning makes cleaning by hand or at the carwash a breeze. Designed to look sharp, with a glossy, dark smoke finish that won't fade or crack, thanks to the built-in UV resistance. Plus, the Husky Liners(R) Hood Shield's contour-fit design follows the lines of your truck's hood for a precision look. It's maximum front-end coverage that's ready for anything. Proudly made in the USA with global materials.
Installation Instructions- Hood Shields are covered by Husky Liners Limited Lifetime Warranty, featuring Husky's legendary durability, so they're built to last. Proudly made in the USA with global materials
- Features a precision design that sits just far enough off the hood to make hand-washing a breeze. Also cleans off easily in the carwash.
- Precision, contour-fit design follows the lines of your truck's hood for tough protection that looks like it was made for your truck.
- Tough, impact-resistant acrylic construction prevents dents and scratches. Won't fade or crack, thanks to built-in UV coating.
- Hood Shields Are Covered By Husky Liners Limited Lifetime Warranty/Featuring Huskys Legendary Durability
- Features A Precision Design That Sits Just Far Enough Off The Hood To Make Hand-Washing A Breeze
- Tough/Impact-Resistant Acrylic Construction Prevents Dents And Scratches/Wont Fade Or Crack
- Husky's highest-profile design gives you the most protection for your hood and windshield.
- Huskys Highest-Profile Design Gives You The Most Protection For Your Hood And Windshield
- So They Are Built To Last/Proudly Made In The USA With Global Materials
- Precision/Contour-Fit Design Follows The Lines Of Your Trucks Hood
- For Tough Protection That Looks Like It Was Made For Your Truck
- Also Cleans Off Easily In The Carwash
- Thanks To Built-In UV Coating
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2007-2013 | GMC | Sierra 1500 | Denali |
| 2009-2013 | GMC | Sierra 1500 | Hybrid |
| 2007-2013 | GMC | Sierra 1500 | SL |
| 2007-2013 | GMC | Sierra 1500 | SLE |
| 2007-2013 | GMC | Sierra 1500 | SLT |
| 2007-2013 | GMC | Sierra 1500 | WT |
| 2010-2013 | GMC | Sierra 1500 | XFE |
| 2007-2010 | GMC | Sierra 2500 HD | SLE |
| 2007-2010 | GMC | Sierra 2500 HD | SLT |
| 2007-2010 | GMC | Sierra 2500 HD | WT |
| 2007-2010 | GMC | Sierra 3500 HD | SLE |
| 2007-2010 | GMC | Sierra 3500 HD | SLT |
| 2007-2010 | GMC | Sierra 3500 HD | WT |
$59.49
Give your truck's hood, windshield, and roofline a tough line of defense from damage with our highest-profile hood shield. The tall, wrap-around design stands up to rocks, bugs, and other road debris with impact-resistant acrylic construction, and off-the-hood positioning makes cleaning by hand or at the carwash a breeze. Designed to look sharp, with a glossy, dark smoke finish that won't fade or crack, thanks to the built-in UV resistance. Plus, the Husky Liners(R) Hood Shield's contour-fit design follows the lines of your truck's hood for a precision look. It's maximum front-end coverage that's ready for anything. Proudly made in the USA with global materials.
Installation Instructions- Hood Shields are covered by Husky Liners Limited Lifetime Warranty, featuring Husky's legendary durability, so they're built to last. Proudly made in the USA with global materials
- Features a precision design that sits just far enough off the hood to make hand-washing a breeze. Also cleans off easily in the carwash.
- Precision, contour-fit design follows the lines of your truck's hood for tough protection that looks like it was made for your truck.
- Tough, impact-resistant acrylic construction prevents dents and scratches. Won't fade or crack, thanks to built-in UV coating.
- Hood Shields Are Covered By Husky Liners Limited Lifetime Warranty/Featuring Huskys Legendary Durability
- Features A Precision Design That Sits Just Far Enough Off The Hood To Make Hand-Washing A Breeze
- Tough/Impact-Resistant Acrylic Construction Prevents Dents And Scratches/Wont Fade Or Crack
- Husky's highest-profile design gives you the most protection for your hood and windshield.
- Huskys Highest-Profile Design Gives You The Most Protection For Your Hood And Windshield
- So They Are Built To Last/Proudly Made In The USA With Global Materials
- Precision/Contour-Fit Design Follows The Lines Of Your Trucks Hood
- For Tough Protection That Looks Like It Was Made For Your Truck
- Also Cleans Off Easily In The Carwash
- Thanks To Built-In UV Coating
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2019 | GMC | Sierra 1500 | AT4 |
| 2014-2019 | GMC | Sierra 1500 | Base |
| 2014-2019 | GMC | Sierra 1500 | Denali |
| 2019 | GMC | Sierra 1500 | Elevation |
| 2014-2019 | GMC | Sierra 1500 | SLE |
| 2014-2019 | GMC | Sierra 1500 | SLT |
| 2019 | GMC | Sierra 1500 Limited | Base |
| 2019 | GMC | Sierra 1500 Limited | SLE |
$59.49
Give your truck's hood, windshield, and roofline a tough line of defense from damage with our highest-profile hood shield. The tall, wrap-around design stands up to rocks, bugs, and other road debris with impact-resistant acrylic construction, and off-the-hood positioning makes cleaning by hand or at the carwash a breeze. Designed to look sharp, with a glossy, dark smoke finish that won't fade or crack, thanks to the built-in UV resistance. Plus, the Husky Liners(R) Hood Shield's contour-fit design follows the lines of your truck's hood for a precision look. It's maximum front-end coverage that's ready for anything. Proudly made in the USA with global materials.
Installation Instructions- Hood Shields are covered by Husky Liners Limited Lifetime Warranty, featuring Husky's legendary durability, so they're built to last. Proudly made in the USA with global materials
- Features a precision design that sits just far enough off the hood to make hand-washing a breeze. Also cleans off easily in the carwash.
- Precision, contour-fit design follows the lines of your truck's hood for tough protection that looks like it was made for your truck.
- Tough, impact-resistant acrylic construction prevents dents and scratches. Won't fade or crack, thanks to built-in UV coating.
- Hood Shields Are Covered By Husky Liners Limited Lifetime Warranty/Featuring Huskys Legendary Durability
- Features A Precision Design That Sits Just Far Enough Off The Hood To Make Hand-Washing A Breeze
- Tough/Impact-Resistant Acrylic Construction Prevents Dents And Scratches/Wont Fade Or Crack
- Husky's highest-profile design gives you the most protection for your hood and windshield.
- Huskys Highest-Profile Design Gives You The Most Protection For Your Hood And Windshield
- So They Are Built To Last/Proudly Made In The USA With Global Materials
- Precision/Contour-Fit Design Follows The Lines Of Your Trucks Hood
- For Tough Protection That Looks Like It Was Made For Your Truck
- Also Cleans Off Easily In The Carwash
- Thanks To Built-In UV Coating
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2014-2021 | Toyota | Tundra | 1794 Edition |
| 2014-2021 | Toyota | Tundra | Limited |
| 2021 | Toyota | Tundra | Nightshade |
| 2014-2021 | Toyota | Tundra | Platinum |
| 2014-2021 | Toyota | Tundra | SR |
| 2014-2021 | Toyota | Tundra | SR5 |
| 2021 | Toyota | Tundra | Trail |
| 2015-2017,2019-2021 | Toyota | Tundra | TRD Pro |
$59.49
Give your truck's hood, windshield, and roofline a tough line of defense from damage with our highest-profile hood shield. The tall, wrap-around design stands up to rocks, bugs, and other road debris with impact-resistant acrylic construction, and off-the-hood positioning makes cleaning by hand or at the carwash a breeze. Designed to look sharp, with a glossy, dark smoke finish that won't fade or crack, thanks to the built-in UV resistance. Plus, the Husky Liners(R) Hood Shield's contour-fit design follows the lines of your truck's hood for a precision look. It's maximum front-end coverage that's ready for anything. Proudly made in the USA with global materials.
Installation Instructions- Hood Shields are covered by Husky Liners Limited Lifetime Warranty, featuring Husky's legendary durability, so they're built to last. Proudly made in the USA with global materials
- Features a precision design that sits just far enough off the hood to make hand-washing a breeze. Also cleans off easily in the carwash.
- Precision, contour-fit design follows the lines of your truck's hood for tough protection that looks like it was made for your truck.
- Tough, impact-resistant acrylic construction prevents dents and scratches. Won't fade or crack, thanks to built-in UV coating.
- Hood Shields Are Covered By Husky Liners Limited Lifetime Warranty/Featuring Huskys Legendary Durability
- Features A Precision Design That Sits Just Far Enough Off The Hood To Make Hand-Washing A Breeze
- Tough/Impact-Resistant Acrylic Construction Prevents Dents And Scratches/Wont Fade Or Crack
- Husky's highest-profile design gives you the most protection for your hood and windshield.
- Huskys Highest-Profile Design Gives You The Most Protection For Your Hood And Windshield
- So They Are Built To Last/Proudly Made In The USA With Global Materials
- Precision/Contour-Fit Design Follows The Lines Of Your Trucks Hood
- For Tough Protection That Looks Like It Was Made For Your Truck
- Also Cleans Off Easily In The Carwash
- Thanks To Built-In UV Coating
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2023 | Toyota | 4Runner | 40th Anniversary Edition |
| 2010-2024 | Toyota | 4Runner | Limited |
| 2020-2021 | Toyota | 4Runner | Nightshade |
| 2010-2024 | Toyota | 4Runner | SR5 |
| 2018-2024 | Toyota | 4Runner | SR5 Premium |
| 2010-2016,2021-2022 | Toyota | 4Runner | Trail |
| 2017-2024 | Toyota | 4Runner | TRD Off-Road |
| 2018-2024 | Toyota | 4Runner | TRD Off-Road Premium |
| 2015-2024 | Toyota | 4Runner | TRD Pro |
| 2022-2024 | Toyota | 4Runner | TRD Sport |
| 2020-2021 | Toyota | 4Runner | Venture |
Showing 30/243
Explore Related Collections
- Choosing a selection results in a full page refresh.
- Opens in a new window.