The Injector Dynamics 1750-XDS is a high-performance fuel delivery solution designed to bridge the gap between the ID1300-X and ID2600-XDS. Built to withstand the rigors of extreme fuel environments, these injectors feature corrosion-resistant stainless steel internals, making them fully compatible with all known automotive fuels including Ethanol, E85, and Methanol. The 1750-XDS series is engineered to provide exceptional idle and cruise behavior without sacrificing the high-flow overhead required for forced induction and high-horsepower engines.

• Manufacturer: Injector Dynamics
• Series: 1750-XDS
• Length: 60mm (O-ring to O-ring)
• Upper O-Ring: 14mm (Grey Top)
• Lower O-Ring: 14mm
• Quantity: Matched set of 4
• Construction: Corrosion-resistant internals
• Fuel Compatibility: Gasoline, Ethanol, E85, Methanol

Each set is closely matched by flow rate and battery offset to ensure cylinder-to-cylinder consistency. This precision characterization provides the necessary data for seamless integration with modern engine management systems, allowing for easier tuning and more reliable performance.

The Injector Dynamics 1750-XDS provides precise fuel delivery for high-performance engines requiring high flow rates without sacrificing low-pulse-width stability. As part of the XDS series, these injectors feature a corrosion-resistant internal construction, making them fully compatible with all known automotive fuels, including ethanol-based blends like E85. This set of four is flow-matched to tight tolerances, ensuring consistent cylinder-to-cylinder combustion and improved tuning accuracy.

Designed for easy installation into compatible fuel rails, these injectors feature a standard 60mm length and 14mm O-rings on both the upper and lower seals. The purple tops serve as a distinct identifier for the 1750-XDS series, signifying a component engineered for demanding forced induction or high-horsepower naturally aspirated builds.

• Series: 1750-XDS
• Quantity: Set of 4
• Length: 60mm (O-ring to O-ring)
• Upper O-Ring: 14mm (Purple Top)
• Lower O-Ring: 14mm
• Fuel Compatibility: All known automotive fuels including E85
• Matching: Precision flow-matched set

The Injector Dynamics 1750-XDS series delivers high-output fueling with the precision and control required for performance tuning. This set of four injectors is engineered to bridge the gap between the ID1300x and ID2600-xds, providing a high-flow solution that maintains excellent idle and cruise behavior. Each unit features a 60mm length and an 11mm blue top, utilizing a Denso lower cushion for a secure, leak-free seal in compatible intake manifolds.

Built to handle the demands of forced induction and high-horsepower builds, these injectors are compatible with all known automotive fuels, including E85. Every set is matched by flow rate and dead time to ensure consistent cylinder-to-cylinder performance, simplifying the tuning process and improving engine safety.

• Brand: Injector Dynamics
• Series: 1750-XDS
• Quantity: Set of 4
• Length: 60mm (O-ring to O-ring)
• Top Diameter: 11mm (Blue Top)
• Lower Seal: Denso Lower Cushion
• Compatibility: Compatible with all known fuels including E85

Upgrade your fuel system with the Injector Dynamics 1750-XDS, a high-flow injector engineered for extreme performance and full compatibility with all known automotive fuels, including E85 and methanol. These injectors provide exceptional idle and cruise behavior while delivering the high-volume flow required for forced induction and high-horsepower racing applications.

This matched set of four features a 60mm o-ring to o-ring length, utilizing an 11mm blue top inlet and a 14mm lower o-ring for a secure, leak-free seal in performance fuel rails. The XDS series represents the latest evolution in injector technology, offering improved consistency and flow at lower pulse widths compared to previous generations.

• Series: 1750-XDS
• Length: 60mm (O-ring to O-ring)
• Top O-Ring: 11mm (Blue)
• Lower O-Ring: 14mm
• Fuel Compatibility: All known fuels including E85 and Methanol
• Quantity: Matched Set of 4
• Corrosion-resistant internals for long-term reliability

Injector Dynamics 1750-XDS fuel injectors are engineered to deliver high-flow capacity without compromising low-pulse-width stability. This provides the massive fuel volume required for high-horsepower forced induction or ethanol-based builds while maintaining smooth idle and cruise characteristics. The 1750-XDS series features a corrosion-resistant internal construction, making it fully compatible with gasoline, E85, and other alcohol-based fuels.

This matched set of four injectors is built to exact tolerances to ensure consistent cylinder-to-cylinder fuel distribution. Each injector features a 48mm effective length and a 14mm black bottom adapter, designed to seat securely in compatible fuel rails and intake manifolds. The USCAR electrical connector provides a reliable, moisture-resistant connection to the vehicle harness.

• Manufacturer Part Number: 1750-XDS
• Connector Type: USCAR
• Overall Length: 48mm (O-ring to O-ring)
• Bottom Adapter: 14mm (Black)
• Set Count: Matched Set of 4
• Fuel Compatibility: Gasoline, Ethanol, Methanol, E85

The Injector Dynamics 1750-XDS is a high-flow fuel injector engineered to bridge the gap between streetable idle characteristics and the massive fuel volume required for high-horsepower forced induction applications. As an evolution of the X-Series, these injectors feature all-stainless internals, making them fully compatible with all known fuels, including corrosive alcohol-based fuels like E85 and methanol.

These injectors are built to provide consistent performance across a wide range of pulse widths, ensuring linear fuel delivery even at low duty cycles. Every set is flow-matched to exacting tolerances, providing the cylinder-to-cylinder consistency necessary to prevent lean conditions and optimize engine tuning. This specific configuration is designed for fuel rails and manifolds requiring a 48mm length and 14mm top and lower O-rings.

• Manufacturer: Injector Dynamics
• Series: 1750-XDS
• Quantity: Set of 4
• Overall Length: 48mm
• Top O-Ring Diameter: 14mm
• Lower O-Ring Diameter: 14mm
• Internals: Corrosion-resistant stainless steel
• Fuel Compatibility: Gasoline, E85, Methanol, Ethanol

Injector Dynamics 1750-XDS fuel injectors are engineered to provide high-flow performance without compromising low-flow stability. Designed for compatibility with all known fuels, including ethanol-based fuels like E85, these injectors are built to handle the demands of high-output forced induction builds while maintaining exceptional idle and cruise characteristics.

• Series: 1750-XDS
• Length: 48mm
• Top Configuration: 11mm Machined Top (WRX Spec)
• Cushion Style: Denso Low Cushion
• Quantity: Matched Set of 4

Each set is precision-matched to ensure uniform fuel delivery across all cylinders, simplifying the tuning process and protecting your engine. The XDS series features a revised internal geometry for improved resistance to corrosion and fuel deposits compared to previous generations.

Designed for high-performance applications, this set of four Injector Dynamics 1750-XDS fuel injectors provides precise fuel metering for Honda S2000 models utilizing a low configuration setup. The 1750-XDS series is engineered to deliver high flow rates while maintaining the low-pulse-width stability required for consistent idle and part-throttle drivability.

These injectors feature a 48mm length and include tops machined to 11mm to ensure a secure fit with the fuel rail. As with all Injector Dynamics components, these units are strictly matched by flow and offset to provide exceptional cylinder-to-cylinder consistency, critical for high-boost or high-compression engines.

• Manufacturer: Injector Dynamics
• Series: 1750-XDS
• Length: 48mm (O-ring to O-ring)
• Top Interface: Machined to 11mm
• Application: Honda S2000 (Low Configuration)
• Quantity: Set of 4 matched injectors

The Injector Dynamics 1750-XDS series provides high-output fuel delivery while maintaining the precise control required for smooth idle and low-load performance. Designed for high-horsepower builds, these injectors are engineered to provide linear flow at low pulse widths, solving the common tuning hurdles associated with large-capacity injectors.

This set of 4 is built for durability and is fully compatible with all known fuels, including alcohol-based options like E85. The compact 34mm length is designed for specific fuel rail heights, utilizing standard 14mm O-rings to ensure a leak-free seal. Each injector comes with the necessary electrical connectors to streamline the wiring process during installation.

• Brand: Injector Dynamics
• Series: 1750-XDS
• Injector Length: 34mm (without adapter)
• O-Ring Diameter: 14mm
• Quantity: Set of 4
• Included: Electrical connectors

Fits Mazda Miata models requiring 11mm fuel rail adaptors and -204 lower cushions.

This set of four Injector Dynamics ID1050-XDS fuel injectors provides precision fueling for high-performance Mazda Miata builds. The ID1050-XDS series is engineered to deliver exceptional flow consistency and reliability, featuring internal components designed for longevity and corrosion resistance. These injectors are specifically configured to interface with the fuel rail and intake manifold using the included hardware for a professional-grade fitment.

• Brand: Injector Dynamics
• Series: ID1050-XDS
• Application: Mazda Miata
• Adaptors: 11mm (Blue)
• Lower Cushions: -204
• Quantity: Set of 4

Fits 2015-2018 Subaru WRX STI.

The Cobb NexGen Stage 2 Power Package provides a calibrated performance upgrade path for the VA-chassis STI, focusing on optimizing airflow and thermal efficiency. This system represents the next evolution in Subaru performance tuning, designed to deliver consistent power gains through a combination of high-flow hardware and precise ECU management while maintaining compatibility with modern standards.

• Includes Accessport V3 for industry-leading ECU calibration and real-time monitoring
• Blue-finished hardware components for enhanced engine bay aesthetics and durability
• Engineered for improved induction and cooling performance
• Complete bolt-on solution with all necessary installation hardware included
• Manufacturer Part Number: SUB004NG2S1-BL

Fits 2015-2018 Subaru STI.

The Cobb NexGen Stage 2 Power Package is an engineered performance solution designed to optimize the EJ257 powerplant. This kit centers on the Accessport V3, providing a recalibrated ECU map that works in harmony with specifically selected hardware upgrades to improve throttle response and power delivery. By managing boost, fueling, and ignition timing more effectively than the factory calibration, this NexGen system offers a significant jump in performance while maintaining the high standards of a daily-driven vehicle.

• Comprehensive Stage 2 tuning solution with Accessport V3
• Engineered NexGen hardware components for increased efficiency
• Sleek Black finish for a professional under-hood appearance
• Direct bolt-on installation with no permanent vehicle modifications required
• Manufacturer Part Number: SUB004NG2S1-BK

The Injector Dynamics ID1050X is the evolution of the industry-standard ID1000, re-engineered from the ground up to provide exceptional idle and cruise behavior while supporting the high flow rates required for forced induction and performance builds. This set of four injectors includes 11mm blue adapters to ensure a secure fit and proper alignment within the fuel rail.

Built with corrosion-resistant internals, the ID1050X is fully compatible with all known automotive fuels, including ethanol and E85. Each injector is part of a flow-matched set, delivering the precise fuel metering and consistency necessary for modern ECU tuning. As high-impedance units, they interface directly with factory and aftermarket engine management systems without the need for additional resistor boxes.

• Manufacturer Part Number: 1050.60.11.14.4
• Adapter Size: 11mm (Blue)
• Quantity: Set of 4
• Compatibility: All known automotive fuels (Gasoline, Ethanol, E85)
• Design: High-impedance with corrosion-resistant internal components

Fits select 1986-2009 Honda and Acura vehicles with B, D, F, or H-series engines (excluding D17), including Civic, Integra, S2000, Prelude, and Accord.

Grams Performance high-impedance fuel injectors are engineered to provide precise fuel metering and superior atomization for high-output engines. Each G2-1150-0500 injector set is individually balanced, flow-tested, and dynamically matched within 1% of each other. This stringent characterization ensures unmatched cylinder-to-cylinder consistency, which is critical for maintaining optimal idle quality, throttle response, and engine safety even at low pulse widths.

Built for versatility and durability, these injectors feature stainless steel internals, making them fully compatible with all fuels, including oxygenated fuels with MTBE and racing blends like E85, FTW, Q16, M5, and C45. The ultra-fast solenoids provide a linear response curve across a wide range of operating conditions, accurately delivering fuel at high pressures and short pulse widths.

• Manufacturer Part Number: G2-1150-0500
• Flow Rate: 1150cc
• Design: High-impedance (saturated)
• Internals: Corrosion-resistant stainless steel
• Testing: Flow matched within 1% variation
• Fuel Compatibility: All fuels including MTBE and E85
• Quantity: Set of 4 balanced injectors

Fits select 2002-2009 Acura RSX, TSX, and Honda S2000 models. These Grams Performance 750cc fuel injectors provide the precise fuel delivery required for high-output K-Series and F-Series engines.

Engineered for consistency and performance, these injectors utilize high-impedance circuitry to remain compatible with most factory and aftermarket ECUs. Each injector is manufactured using premium materials and advanced techniques to ensure tight tolerances and reliable flow under high-demand conditions. This set of four is a direct-fit solution for enthusiasts upgrading their forced induction or high-compression naturally aspirated setups.

• Manufacturer Part Number: G2-0750-0501
• Flow Rate: 750cc/min
• Design: High Impedance (Saturated)
• Quantity: Matched set of 4 injectors
• Compatibility: Replaces OE injectors on select 2002-2009 Honda and Acura applications

Fits select 1986-2009 Honda and Acura models, including the Integra, Civic, Accord, Prelude, and S2000 equipped with B, D, F, and H-series engines (excludes D17).

Grams Performance high-performance fuel injectors are engineered to provide precise fuel delivery for modified street and track applications. These 750cc injectors utilize a high-impedance design, making them compatible with most factory and aftermarket ECUs without the need for a resistor box. Each injector is manufactured using premium materials and advanced techniques to ensure consistent flow rates and spray patterns across the set.

• Flow Rate: 750cc/min
• Configuration: High-impedance (saturated) design
• Quantity: Set of 4 matched injectors
• Engine Compatibility: Honda B, D, F, and H-Series (Excluding D17)
• Manufacturer Part Number: G2-0750-0500

Each set is subjected to stringent quality control procedures to ensure reliable performance under high-duty cycles, making them an essential upgrade for forced induction or high-compression naturally aspirated builds.

Fits select 1990-2005 Mazda Miata models including Base, LS, SE, and Mazdaspeed (1.8L).

Grams Performance 550cc fuel injectors are engineered to provide the precise fuel delivery required for high-performance Mazda Miata builds. Designed for consistency and reliability, these high impedance injectors are an ideal solution for forced induction or modified naturally aspirated setups. Each unit is manufactured using premium materials and advanced techniques to ensure tight tolerances and an optimal spray pattern for improved combustion efficiency.

• Flow Rate: 550cc/min
• Design: High Impedance
• Quantity: Set of 4
• Material: Premium internal components for long-term durability
• Manufacturer Part Number: G2-0550-1001

Full Vehicle Compatibility:

• 1990-1997, 1999-2005 Mazda Miata Base
• 1999 Mazda Miata 10th Anniversary
• 1993 Mazda Miata LE
• 2000-2005 Mazda Miata LS
• 1994-1997 Mazda Miata M Edition
• 2004-2005 Mazda Miata Mazdaspeed
• 1991, 2000-2003 Mazda Miata SE
• 2003 Mazda Miata Shinsen
• 1997 Mazda Miata STO

This set of four Injector Dynamics 2600-XDS fuel injectors is engineered for high-performance applications requiring precise fuel delivery and high flow rates. These injectors feature a 60mm physical length (O-ring to O-ring) and utilize 14mm O-rings on both the top and lower seats, providing a standardized fitment for many performance fuel rails and intake manifolds.

• Manufacturer Part Number: 2600.60.14.14.4
• Series: 2600-XDS
• Quantity: Matched set of 4
• Length: 60mm
• Top O-Ring: 14mm
• Lower O-Ring: 14mm

Each injector in this set is precision-matched to ensure consistent flow and dead time characteristics across all cylinders, which is critical for maintaining optimal engine safety and tuning stability under high load.

Upgrade your fuel system with the Injector Dynamics 2600-XDS Fuel Injector Set (MPN: 2600.60.11.D.4). Engineered specifically for high-output motorsport applications, the 2600-XDS series provides exceptional flow consistency and superior idle quality even at low pulse widths. These injectors are fully compatible with all known automotive fuels, including gasoline, methanol, and ethanol-based fuels like E85.

This matched set of four injectors is configured with a 60mm total length and an 11mm top adapter to fit specific fuel rail and manifold requirements. The Denso lower cushion provides a precise, reliable seal for applications utilizing that standard lower interface. Every Injector Dynamics set is flow-matched to ensure uniform performance across all cylinders, reducing the risk of lean conditions in high-performance engines.

• Corrosion Resistant: Internal components are designed to withstand corrosive fuels for long-term reliability.
• Precise Fuel Control: Optimized for high-pressure applications where accuracy is critical.
• Plug-and-Play Integration: Designed to replace worn or undersized injectors in high-flow setups.

• Manufacturer Part Number: 2600.60.11.D.4
• Quantity: Set of 4
• Length: 60mm
• Top Diameter: 11mm
• Lower Seat: Denso Lower Cushion

The Injector Dynamics 2600-XDS series represents the pinnacle of high-flow performance fueling, specifically engineered for demanding motorsport applications. This flow-matched set of four injectors provides the precise fuel delivery required for high-horsepower builds while maintaining the reliability expected from the XDS line.

• Manufacturer Part Number: 2600.60.11.14.4
• Series: 2600-XDS
• Length: 60mm (O-ring to O-ring)
• Top O-Ring: 11mm
• Lower O-Ring: 14mm
• Quantity: Set of 4 flow-matched injectors

Built with all-stainless internals, these injectors are compatible with all known fuels including gasoline, methanol, and ethanol blends. The 60mm length and specific 11mm/14mm O-ring configuration ensure a direct fit into compatible fuel rails and intake manifolds, providing a secure seal and consistent spray pattern for optimal combustion.

The Injector Dynamics 2600-XDS series represents the standard for high-flow fuel delivery in extreme performance applications. Designed to handle massive fuel requirements while maintaining excellent idle and cruise characteristics, these injectors are an essential component for high-output builds running E85 or other ethanol-based fuels. This matched set of four provides the consistency and reliability required for precision tuning and engine safety.

• Manufacturer Part Number: 2600.48.14.14B.4
• Series: 2600-XDS
• Injector Length: 48mm (O-ring to O-ring)
• Inlet Diameter: 14mm
• Outlet/Adapter Diameter: 14mm
• Quantity: Set of 4 matched injectors

Each injector is rigorously tested to ensure linear flow rates and consistent dead-time characteristics across the entire operating range. The included 14mm top and bottom adapters allow for a drop-in fit for specific fuel rail and intake manifold configurations, ensuring a leak-free seal and optimal spray pattern orientation.

The Injector Dynamics 2600-XDS series represents the peak of high-flow fuel delivery, engineered specifically for high-pressure applications where stability and precision are critical. This set of four injectors provides a massive flow rate while maintaining the control and consistency required for refined idle and low-load drivability.

• Product Line: 2600-XDS
• Length: 48mm (between o-ring centers)
• O-Ring Diameter: 14mm upper and 14mm lower
• Quantity: Matched set of 4
• Performance: Optimized for high-pressure fuel systems and compatible with all known automotive fuels
• Manufacturer Part Number: 2600.48.14.14.4

Each injector is meticulously characterized to ensure a perfect match across the set, simplifying the tuning process and protecting your engine from cylinder-to-cylinder fuel variance. These 48mm length injectors are designed to fit 14mm fuel rails and intake bungs commonly found in performance applications.

Designed for high-horsepower applications requiring maximum fuel delivery without compromising idle quality, the Injector Dynamics 2600-XDS series provides precision flow control for demanding builds. This set of four injectors features a 48mm length and 11mm top, specifically equipped with WRX bottom adapters for a direct-fit solution in compatible Subaru fuel rail configurations.

The 2600-XDS series is engineered to provide consistent atomization and linear flow even at high pressures and duty cycles. This makes them an essential upgrade for forced induction or ethanol-based fuel systems where standard injectors fall short. Each injector is part of a flow-matched set to ensure cylinder-to-cylinder consistency, critical for engine longevity and tuning precision.

• Product Line: 2600-XDS
• Length: 48mm
• Top O-Ring: 11mm
• Adapter: WRX Bottom Adapter
• Quantity: Set of 4
• Manufacturer Part Number: 2600.48.11.WRX.4

The Injector Dynamics 2600-XDS is the most advanced high-flow injector available, engineered specifically for high-output applications requiring extreme fuel delivery. This matched set of four provides exceptional flow consistency and superior idle control, bridging the gap between massive power and streetable drivability. Built with a stainless steel internal flow path, the XDS series is designed to withstand the corrosive nature of E85, methanol, and oxygenated fuels.

• Manufacturer Part Number: 2600.34.14.14.4
• Product Series: 2600-XDS
• Injector Length: 34mm
• Top O-Ring Diameter: 14mm
• Lower O-Ring Diameter: 14mm
• Quantity: Matched Set of 4
• Compatible with all known automotive fuels

The Injector Dynamics ID1300X is a high-output fuel injector designed for high-performance applications that require precise fuel delivery and compatibility with various fuel types. This specific set includes four injectors pre-configured with 14mm grey top adapters and 14mm silver lower o-rings for a secure, leak-free installation in matching fuel rails and intake manifolds.

Built with all-stainless internals, the ID1300X series is engineered to withstand the corrosive nature of alcohol-based fuels like E85 while maintaining exceptional idle and cruise behavior. These injectors are the result of a collaboration between Injector Dynamics and Bosch, ensuring high-pressure capability and consistent flow rates across the entire set.

• Manufacturer Part Number: 1300.60.14.14B.4
• Product Series: ID1300X
• Top Adapter: 14mm (Grey)
• Lower O-Ring: 14mm (Silver)
• Quantity: Set of 4 Injectors
• Internals: All-Stainless Steel
• Fuel Compatibility: All known automotive fuels (Gasoline, Ethanol, Methanol)

The Injector Dynamics ID1300x is a high-performance fuel injector designed specifically for motorsport applications. Developed in collaboration with Bosch Motorsport, these injectors feature all-stainless internals, making them fully compatible with all known fuels, including E85 and other corrosive alcohol-based blends.

This set of four 1340cc injectors provides exceptional idle quality and predictable flow at high pressures. Each injector is measured for flow and latency across multiple data points to ensure a perfectly matched set for your engine. The 60mm length and 14mm upper and lower O-rings ensure a secure fit in compatible fuel rails and intake manifolds.

• Nominal Flow Rate: 1340cc/min @ 3.0 bar (43.5 psi)
• Length: 60mm (O-ring to O-ring)
• Inlet O-Ring: 14mm (Purple Top)
• Outlet O-Ring: 14mm
• Construction: All-stainless internals for maximum corrosion resistance
• Included: Set of 4 injectors with required O-rings
• Manufacturer Part Number: 1300.60.14.14.4

Upgrade your fuel system with this set of four Injector Dynamics 1340cc injectors, engineered for precise delivery and consistent performance in high-output applications. These injectors are designed to provide the linear response required for a stable idle and accurate fueling across the entire RPM range, making them a preferred choice for professional tuners.

This specific configuration features a 60mm length (measured o-ring to o-ring) and an 11mm blue top adapter. The inclusion of the Denso-style lower cushion ensures a proper seal and secure fitment in compatible intake manifolds. Every set is flow-matched to tight tolerances to ensure cylinder-to-cylinder consistency.

• Flow Rate: 1340cc/min
• Injector Length: 60mm
• Top Diameter: 11mm (Blue Top)
• Lower Interface: Denso Lower Cushion
• Quantity: Matched Set of 4
• Manufacturer Part Number: 1300.60.11.D.4

This set of four Injector Dynamics 1340cc fuel injectors (MPN 1300.60.11.14.4) is engineered for high-output applications requiring precise fuel metering and exceptional atomization. These injectors provide consistent performance across a wide range of pulse widths, ensuring idle stability without sacrificing top-end flow. Constructed with stainless steel internals, they are fully compatible with all known fuels, including gasoline, E85, and alcohol-based blends.

• Manufacturer Part Number: 1300.60.11.14.4
• Flow Rate: 1340cc/min at 3.0 Bar (43.5 psi)
• Length: 60mm (O-ring to O-ring)
• Inlet Diameter: 11mm (Blue Top)
• Outlet Diameter: 14mm Lower O-ring
• Corrosion Resistance: Full stainless steel internal construction
• Quantity: Matched set of 4

The 60mm length and 11mm/14mm o-ring configuration is designed to fit specific high-performance fuel rails and intake manifolds. Every set is flow-matched to tight tolerances to ensure uniform cylinder-to-cylinder fuel distribution, which is critical for engine safety and tuning precision in forced induction or high-compression builds.

This set of four Injector Dynamics 1340cc fuel injectors is engineered for high-performance applications requiring precise fuel delivery and exceptional atomization. Featuring a 48mm overall length and 14mm O-rings, these injectors are equipped with a 14mm black bottom adapter to ensure a secure fit in compatible fuel rails and intake manifolds.

Constructed with all-stainless internals, these injectors offer superior corrosion resistance, making them fully compatible with E85 and other alcohol-based fuels. Each set is flow-matched to tight tolerances to ensure consistent cylinder-to-cylinder performance, which is critical for maintaining engine safety and tuning stability under high load.

• Flow Rate: 1340cc/min at 3.0 bar (43.5 psi)
• Injector Length: 48mm (O-ring to O-ring)
• Inlet O-Ring: 14mm
• Outlet O-Ring: 14mm (with Black Bottom Adapter)
• Internals: All-Stainless Steel
• Quantity: Matched Set of 4
• Manufacturer Part Number: 1300.48.14.14B.4

Upgrade your vehicle's fueling system with this precision-matched set of four Injector Dynamics 1340cc fuel injectors. Engineered for high-performance applications, these injectors deliver exceptional atomization and consistent flow rates across a wide pulse-width range, ensuring better idle quality and tuning stability for forced induction or high-output builds.

This specific configuration features a 48mm length and 14mm grey tops to suit specific fuel rail and manifold requirements. Each set is rigorously tested and matched to provide uniform fuel delivery across all cylinders, reducing the risk of lean conditions under load.

• Flow Rate: 1340cc/min
• Length: 48mm (O-ring to O-ring)
• Inlet Diameter: 14mm (Grey Top)
• Outlet Diameter: 14mm (Lower O-Ring)
• Quantity: Matched set of 4
• Manufacturer Part Number: 1300.48.14.14.4