Maintain the precision and engagement of your multi-disc clutch system with the Comp1 Lower Floater Plate. This replacement component (part number 4-8026-C) is engineered to restore factory-spec tolerances between friction surfaces, ensuring smooth release and consistent torque transfer under high-stress driving conditions.

In a multi-disc setup, the floater plate is critical for heat dissipation and maintaining the alignment of the clutch pack. Over time, aggressive heat cycles can cause warping or surface wear on original plates, leading to clutch drag or erratic engagement. This lower floater plate is manufactured from high-tensile steel to resist distortion and provide a true, flat surface for the friction discs to bite into.

• Manufacturer Part Number: 4-8026-C
• Position: Lower floater plate
• Construction: High-tensile steel for heat resistance and durability
• Application: Direct replacement for Comp1 multi-disc clutch assemblies
• Ensures proper stack height and consistent pedal feel

Ensure consistent torque transfer and precise engagement by refreshing your multi-plate system with this Comp1 Clutch replacement middle disc. Designed specifically as a service component for Honda and Acura B-Series engines equipped with hydraulic transmissions, this disc allows you to maintain the performance of your Triple Disc assembly without the expense of a full kit replacement.

• Fits Honda/Acura B-Series engines with hydraulic transmissions
• Position: Middle Disc Only
• Direct replacement for Comp1 Triple Disc clutch kits
• Critical for maintaining proper stack height and friction surface integrity

Fits 2013-2020 Subaru BRZ, Scion FR-S, and Toyota 86 models. This ACT Performance Street Sprung Disc (3000506) is engineered for drivers seeking improved engagement and faster shifting without compromising daily drivability. Featuring a high copper content within its premium organic friction material, this disc provides superior heat transfer and thermal stability compared to standard replacements.

The spring-centered assembly utilizes a robust design with bushings and cone springs to replicate the dampening characteristics of an OE clutch. This helps eliminate gear rattle and drivetrain noise while providing the strength needed for performance use. A reduced marcel design allows for quicker shift action, perfectly complementing ACT pressure plates for a responsive pedal feel and reliable torque capacity.

• Manufacturer Part Number: 3000506
• High-copper organic lining for enhanced thermal conductivity
• Spring-centered hub for frictional dampening and reduced NVH
• Reduced marcel design for faster gear synchronization
• Compatible with factory and ACT pressure plates

Fits 2000-2009 Honda S2000 Base and CR models.

The ACT 3000106 Performance Street clutch disc is engineered for drivers who demand quicker shifting and improved durability without sacrificing street drivability. As the most popular choice in the ACT lineup, this disc features premium organic friction materials with a high copper content to facilitate superior heat transfer during spirited driving and high-load conditions.

Designed with a reduced marcel, this disc allows for faster shift action to perfectly complement ACT pressure plates. The spring-centered hub assembly utilizes a specialized combination of bushings and cone springs, mimicking factory clutch dampening to minimize drivetrain noise and vibration while significantly increasing overall component strength and reliability.

• Manufacturer Part Number: 3000106
• Disc Type: Performance Street Sprung
• Material: High-copper organic friction facing
• Design: Reduced marcel for lightning-fast gear changes
• Hub: Spring-centered assembly for frictional dampening and noise reduction
• Benefits: Increased heat capacity, smooth engagement, and extended clutch life

Restore the engagement surface of your Fidanza aluminum flywheel with the Fidanza 9.85in OD x 6in ID Friction Kit (MPN 229851). This kit allows you to refresh the friction area of your existing flywheel, providing a cost-effective alternative to replacing the entire assembly when the surface becomes worn or heat-spotted.

• Manufactured from 1050 hardened steel for high-performance durability
• Heat-treated friction plate provides optimum grip and extended service life
• Pickled and oiled finish helps prevent corrosion during storage and service
• Precision milled to meet strict tolerances for smooth operation
• Includes all-new replacement hardware for a complete and secure installation

Fits 1990-2001 Acura Integra, Honda Civic Si, Civic del Sol VTEC, and CR-V (B-Series Engines with Hydraulic Transmission).

This replacement lower disc from Comp1 Clutch is engineered specifically for use in their high-performance twin-disc clutch systems. Designed to restore the holding capacity and engagement precision of your B-Series drivetrain, this component is a direct replacement for the lower disc in the TM2-880-B assembly. It is built to withstand the high-torque demands of modified B16, B18, and B20 engines utilizing a hydraulic transmission setup.

• Manufacturer Part Number: TM2-880-B
• Component Type: Replacement Twin Disc (Lower)
• Transmission Compatibility: Hydraulic B-Series
• Engine Fitment: B16A, B17A, B18C, B18B, B20B/C

Fits select 2003-2020 Infiniti G35, G37, Q60 and Nissan 350Z, 370Z.

The ACT Performance Street Sprung Disc (3000409) is a premier choice for drivers seeking improved engagement and durability without sacrificing street drivability. This disc is engineered with premium organic friction materials containing high copper content, which significantly enhances heat transfer for more consistent performance during spirited driving.

Designed to complement ACT pressure plates, this disc features a reduced marcel to enable faster shift action and quicker gear transitions. The spring-centered assembly utilizes specialized bushings and cone springs—similar to factory units—to provide frictional dampening. This design choice effectively reduces drivetrain noise and vibration (NVH) while increasing overall component strength and reliability.

• Manufacturer Part Number: 3000409
• Material: Premium organic with high copper content for superior heat dissipation
• Design: Spring-centered hub for reduced vibration and quiet operation
• Shift Action: Reduced marcel for faster, crisper gear changes
• Reliability: Increased strength over OE components, backed by a one-year warranty

Fits 2013-2017 Ford Focus ST. This Stage 4 replacement clutch disc from Competition Clutch is designed specifically for vehicles already equipped with the 7248-1620 clutch system. It serves as a direct replacement component, allowing you to restore drivetrain performance without the need to purchase a complete new clutch kit.

Engineered for high-performance use, this disc features ceramic friction material designed to handle the increased torque loads and heat generated by modified engines. This is the disc only and is intended for use as a service part for existing Competition Clutch Stage 4 assemblies.

• Product Line: Stage 4
• Material: High-torque ceramic friction
• Direct replacement for disc included in kit 7248-1620
• Manufacturer Part Number: 387248-1620

Fits select 1970-2015 Buick, Cadillac, Chevrolet, Ford, Oldsmobile, and Pontiac models, including Camaro, Corvette, Mustang, GTO, and CTS-V.

The ACT 6 Pad Sprung Race Disc (part number 6280320) is designed for high-horsepower street and track applications where aggressive engagement and high heat tolerance are critical. This disc utilizes premium ceramic friction materials that offer moderate wear rates while providing a 28% increase in torque capacity compared to typical organic materials.

Built to withstand the rigors of racing, the disc features wraparound spring windows and thicker retainer stampings to reduce stress concentrations. The heat-treated, spring steel drive plate provides necessary support and increases overall assembly strength for high-burst-strength performance.

• Materials: Premium ceramic friction pads for superior heat resistance and durability.
• Hub Design: Sprung center to dampen driveline vibrations while maintaining quick shift response.
• Performance: Holds 28% more torque than organic discs; high burst strength for high-RPM use.
• Construction: Features thicker retainer stampings and heat-treated drive plates for maximum reliability.
• Driving Experience: Delivers aggressive engagement and quick shifts; may result in mild to moderate gear rattle.
• MPN: 6280320

Fits 2004 Chevrolet Colorado models equipped with a 5-speed manual transmission.

This SPEC Stage 1 custom clutch disc (STD621-870) is engineered as a direct-fit replacement for the factory unit, offering an upgrade in durability and engagement feel for street-driven vehicles. Designed specifically for the early Colorado 5-speed drivetrain, this disc provides a reliable solution for drivers seeking a balance between daily drivability and consistent performance.

• Manufacturer: SPEC Clutch
• Series: Stage 1
• Part Number: STD621-870
• Fitment: 2004 Chevrolet Colorado (5-Speed Manual)
• Type: Custom Clutch Disc

Fits 1999-2004 Ford Mustang Cobra models equipped with SPEC SF84A aluminum flywheels.

The SPEC SF84FPK Flywheel Friction Plate is a precision-engineered replacement kit designed to restore the performance and longevity of your SPEC aluminum flywheel. Instead of replacing the entire flywheel assembly when the friction surface becomes worn or heat-damaged, this kit allows for a cost-effective rebuild, ensuring your clutch has a fresh, true surface for optimal engagement and torque transfer.

• Specifically designed for SPEC aluminum flywheel part number: SF84A
• High-quality steel friction surface for consistent bite and heat dissipation
• Provides a flat, clean mating surface for new clutch discs
• Includes all necessary mounting hardware for the friction plate
• Manufacturer Part Number: SF84FPK

Fits 2005-2024 Ford Mustang models.

The Ford Racing 11in Pressure Plate Bolt and Dowel Kit (M-6397-B46) provides the essential hardware required to securely attach a clutch pressure plate to the flywheel. This kit is a critical component for high-performance manual transmission setups where precise alignment and structural rigidity are paramount.

The three included dowel pins are necessary to align and stiffen the pressure plate shell. By reducing deflection, these dowels effectively prevent clutch chatter and ensure a smooth, consistent pedal feel. To complete the installation, the kit includes six 8mm bolts featuring integral lockwashers designed to maintain torque and resist loosening under high-stress conditions.

• Genuine Ford Racing drivetrain hardware
• Designed for 11-inch pressure plate applications
• Prevents clutch chatter by stiffening the pressure plate shell
• Ensures critical alignment between pressure plate and flywheel
• Includes (6) 8mm bolts with integral lockwashers
• Includes (3) alignment dowel pins
• Manufacturer Part Number: M-6397-B46

Ensure proper clutch engagement and drivetrain stability with the Ford Racing 10.5in Pressure Plate Bolt and Dowel Kit. This essential hardware set is engineered to secure the clutch pressure plate to the flywheel, providing the precise alignment required for high-performance manual transmissions.

The kit features three precision-ground dowel pins that serve two critical functions: centering the pressure plate shell for balanced rotation and stiffening the assembly to prevent clutch chatter. To maintain consistent clamping force, the kit includes six 8mm bolts equipped with integral lockwashers to resist loosening under high-load conditions.

• Components: (3) Dowel pins and (6) 8mm pressure plate bolts
• Fastener Type: Bolts with integral lockwashers
• Application: Designed for 10.5-inch pressure plates
• Benefit: Aligns and stiffens the pressure plate shell to eliminate vibration and chatter
• Manufacturer Part Number: M-6397-A302

Secure your performance flywheel with the Fidanza Friction Plate Hardware Pack (MPN 335555). This 21-piece kit is engineered specifically for replacing the mounting hardware on Fidanza friction plates, ensuring a precise and reliable connection to the flywheel body during service or rebuilds.

Each fastener is manufactured from 1050 hardened steel, designed to withstand the high-torque and high-heat environments typical of performance drivetrains. The hardware undergoes a specialized heat-treatment process for optimum grip and extended service life, while the pickled and oiled finish provides essential protection against corrosion. Precision milled to meet strict tolerances, these components ensure your friction plate stays seated and balanced.

• Includes 21 pieces of high-strength mounting hardware (hardware only)
• Constructed from 1050 hardened steel for maximum durability
• Heat-treated for superior strength and resistance to mechanical fatigue
• Pickled and oiled finish for long-lasting corrosion protection
• Precision milled for exact fitment and high-standard tolerances
• Manufacturer Part Number: 335555

Restore the performance of your Fidanza aluminum flywheel with this 9.5-inch replacement friction plate kit (229501-20). Designed for specialty flywheel maintenance, this kit allows you to replace the worn clutch mating surface rather than the entire flywheel assembly, ensuring a consistent and reliable friction coefficient for your drivetrain.

This plate is manufactured from 1050 hardened steel and is heat-treated to provide optimum grip and exceptional service life. Each plate is precision-milled to meet high tolerances for flatness, then pickled and oiled to prevent corrosion during storage and installation. This specific 20-hole version is designed for precise fitment on Fidanza flywheel part number 110661.

• Replacement kit for Fidanza Flywheel #110661 (Verify 20-hole bolt pattern)
• Constructed from 1050 hardened steel for maximum durability
• Heat-treated friction surface for superior grip and heat dissipation
• Pickled and oiled finish for corrosion resistance and longevity
• Precision milled to meet strict flatness standards
• Includes all-new replacement hardware for secure installation
• Manufacturer Part Number: 229501-20

Fits select 1996-2010 Audi, Ford, Mazda, Mitsubishi, Nissan, and Pontiac vehicles. This Fidanza Performance friction kit allows you to refresh your existing Fidanza aluminum flywheel without the cost of replacing the entire unit.

Constructed from 1050 hardened steel, this 9.5-inch friction plate is engineered for high-heat environments and optimum clutch grip. The surface is precision milled to meet strict tolerances and is pickled and oiled to ensure longevity and corrosion resistance. This kit is specifically designed to replace the friction surface on Fidanza flywheel #110661 and includes all necessary mounting hardware for a secure installation.

• Manufacturer Part Number: 229501
• Bolt Pattern: 18-Hole
• Material: 1050 Hardened Steel
• Diameter: 9.5in / 241mm
• Finish: Heat Treated, Pickled, and Oiled
• Includes all-new mounting hardware
• Designed specifically for Fidanza Flywheel #110661

Restore the performance of your rebuildable Fidanza aluminum flywheel with the 229221 9-inch Friction Kit. This service kit is engineered to replace the primary contact surface, allowing for a complete refresh without the cost of a full flywheel replacement. The friction plate is manufactured from 1050 hardened steel, providing a high-friction surface that is heat-treated for maximum grip and long-term thermal stability.

• Constructed from 1050 hardened steel for superior durability
• Heat-treated friction plate ensures optimum grip and resistance to warping
• Precision milled to meet exacting tolerances for flatness
• Pickled and oiled finish for enhanced longevity and corrosion resistance
• Includes all-new mounting hardware and replacement center bearing
• Manufacturer Part Number: 229221

Fits select 2003-2010 Acura TSX, Chevrolet Cobalt, Chevrolet HHR, Mazda 3, Mazda 5, Mazda 6, Mazda MX-5 Miata, and Saturn Sky. This Fidanza replacement friction plate allows you to refresh your Fidanza aluminum flywheel without replacing the entire unit, restoring the critical mating surface for optimum clutch engagement and torque transfer.

Constructed from 1050 hardened steel, this plate is engineered to withstand high-heat environments and heavy-duty use. The surface is heat-treated for maximum grip and longevity, then pickled and oiled to prevent oxidation. Precision milling ensures a perfectly flat surface that meets strict tolerances for smooth operation and consistent pedal feel.

• Manufactured from 1050 hardened steel for superior durability
• Heat-treated surface provides optimum friction and long service life
• Pickled and oiled finish for corrosion resistance
• Precision milled to meet high performance standards
• Includes all-new mounting hardware for a complete installation
• Manufacturer Part Number: 229101

Maintain the high-performance engagement of your Fidanza aluminum flywheel with this 9-inch replacement friction plate kit. Engineered to restore the gripping surface of your drivetrain, this kit allows for a cost-effective rebuild without replacing the entire flywheel assembly. It features a 1050 hardened steel friction surface that has been heat-treated for optimum grip and a long service life.

This kit is specifically designed to fit Fidanza flywheel #112441 and utilizes a 20-hole bolt pattern for secure mounting. To ensure longevity and precision, each plate is milled to exact standards and is pickled and oiled to resist oxidation before installation. The package comes complete with all-new hardware to ensure a proper, high-strength connection to the flywheel body.

• Compatible with Fidanza flywheel part number 112441
• Constructed from 1050 hardened steel for maximum durability
• Heat-treated friction surface for consistent clutch engagement
• Pickled and oiled finish for corrosion resistance
• Precision milled to meet strict tolerances
• Includes all-new mounting hardware
• Manufacturer Part Number: 229001-20

Fits select 2003-2011 Hyundai Tiburon and Subaru Impreza WRX and Legacy models. This replacement friction kit allows you to refresh the surface of your Fidanza aluminum flywheel without needing to replace the entire assembly.

Constructed from 1050 hardened steel, this 9-inch friction plate is heat-treated to provide optimum grip and high-RPM durability. To ensure longevity and a perfect mating surface, the plate is pickled, oiled, and milled to exacting tolerances. Each kit includes all necessary replacement hardware to ensure a secure, flat installation on your existing flywheel.

• Manufactured from high-strength 1050 hardened steel
• Heat-treated friction surface for superior engagement and wear resistance
• Pickled and oiled finish to prevent corrosion
• Precision milled for flat, consistent contact
• Includes all-new mounting hardware
• Manufacturer Part Number: 229001

Restore the high-performance mating surface of your Fidanza aluminum flywheel with this 8.75-inch replacement friction kit. This kit allows you to refresh your flywheel's performance without the expense of replacing the entire assembly, ensuring a consistent and reliable clutch bite.

Manufactured from 1050 hardened steel, the friction plate is heat-treated to provide optimum grip and excellent thermal stability under high-stress driving conditions. Each plate is precision-milled to exacting tolerances and undergoes a pickled and oiled process to prevent corrosion and extend service life.

• Material: 1050 hardened steel for maximum durability and wear resistance.
• Surface Treatment: Heat-treated for optimum grip and long-term performance.
• Finish: Pickled and oiled to protect against oxidation.
• Precision Engineering: Milled to meet high standards for flatness and balance.
• Hardware Included: Comes with all-new hardware for a complete installation.
• Part Number: 228751

Fits select 2002-2010 Honda Civic and Mini Cooper (Base, S, and Clubman models).

The Fidanza 228591 8.5-inch replacement friction kit provides a cost-effective way to restore the performance of your aluminum flywheel without requiring a full unit replacement. Designed for high-stress applications, this friction plate is manufactured from premium 1050 hardened steel to maintain a consistent surface for aggressive clutch engagement and thermal stability.

• 1050 Hardened Steel: High-carbon steel construction offers superior durability and heat resistance under high-torque loads.
• Precision Machined: Every plate is milled to strict tolerances to ensure a perfectly flat mating surface for your clutch disc.
• Enhanced Longevity: The friction surface is heat-treated for optimum grip and then pickled and oiled to prevent corrosion.
• Complete Installation: Includes all-new hardware to ensure the plate is securely fastened to the flywheel body.
• Manufacturer Part Number: 228591

Fits select 1991-2008 Hyundai Tiburon, Nissan Sentra, and Volkswagen Golf models. This Fidanza 8.5-inch friction kit is engineered to renew the performance of your Fidanza aluminum flywheel without the need for a full flywheel replacement.

Constructed from 1050 hardened steel, the friction plate is heat-treated for optimum grip and long-term durability. Each plate is precision milled and finished with a pickled and oiled treatment to ensure longevity and consistent engagement. This kit provides a cost-effective way to restore the friction surface for high-performance driving applications.

• Replaces the friction surface on Fidanza aluminum flywheels
• Manufactured from high-strength 1050 hardened steel
• Heat-treated for superior torque capacity and wear resistance
• Pickled and oiled finish for corrosion protection
• Includes all-new mounting hardware
• Manufacturer Part Number: 228501

Note: Always confirm your bolt pattern before installation. This kit is designed for use with Fidanza flywheel part numbers: 112021, 130131, 130231, 130381, 130401, 130891, 130901, 143201, 143621, 159001, 161161, 161771, 161841, 161971, 186191, 193141, and 193241.

Fits select 1980-2013 Chevrolet vehicles, including Blazer, Camaro, Corvette, Silverado, and Express models.

Extend the life of your Fidanza aluminum flywheel with this 11-inch (Small ID) Friction Kit. Engineered as a direct replacement surface, this kit allows you to maintain high-performance clutch engagement without replacing the entire flywheel assembly. Constructed from 1050 hardened steel, the plate is heat-treated for maximum grip and wear resistance, then pickled and oiled to prevent oxidation and ensure longevity.

Each plate is precision-milled to meet strict tolerances, providing a perfectly flat mating surface for your clutch disc. The kit includes all necessary replacement hardware for a complete and secure installation.

• Material: 1050 Hardened Steel
• Size: 11-inch (Small ID)
• Heat-treated friction surface for optimum grip and long life
• Pickled and oiled finish for corrosion resistance
• Precision milled to meet high performance standards
• Manufacturer Part Number: 221101
• Includes all-new installation hardware

The Fidanza 10.25in Friction Kit (MPN 221021) provides a direct replacement surface for Fidanza performance aluminum flywheels. Built from 1050 hardened steel, this friction plate is heat-treated to provide consistent clutch disc grip and resistance to thermal warping during aggressive driving.

Each plate is pickled and oiled to ensure longevity and prevent corrosion, then precision milled to maintain flat tolerances. This kit is a complete service solution, including all-new hardware required to bolt the new friction surface to the existing aluminum flywheel body.

• Manufacturer Part Number: 221021
• Diameter: 10.25 inches
• Material: 1050 Hardened Steel
• Surface Treatment: Heat-treated, pickled, and oiled
• Construction: Precision milled for flat engagement
• Included: Friction plate and all-new mounting hardware

Fits 2007-2009 Mazda 3 Mazdaspeed.

The Fidanza 221001 10-inch friction kit provides a cost-effective way to restore your Fidanza aluminum flywheel to its original performance levels without replacing the entire unit. This kit is engineered from 1050 hardened steel, heat-treated for maximum grip and long-term durability. Precision milling ensures a perfectly flat surface for consistent clutch engagement.

• Constructed from 1050 hardened steel for superior wear resistance
• Heat-treated friction plate for optimum grip and service life
• Pickled and oiled finish to prevent corrosion and ensure longevity
• Milled to exacting standards for high-performance tolerances
• Includes all-new hardware for a complete installation
• Manufacturer Part Number: 221001

Fits select 2004-2019 Subaru Impreza, WRX, WRX STI, and Legacy models.

The Exedy Stage 1 ULTRA Fiber organic clutch disc is engineered for drivers who require higher heat resistance for spirited street performance and mild motorsports applications without sacrificing the smooth engagement of a street clutch. This disc (MPN FD12H1) features a specialized friction material developed with an optimized copper wire ratio and high-strength fibers, maintaining the superior half-engagement feel characteristic of organic discs while significantly improving thermal stability.

Equipped with sprung center dampers, this disc effectively reduces drivetrain shock and vibration during engagement, protecting your transmission and improving overall drivability. It is designed as a direct replacement component for the Exedy 15803HD clutch kit.

• Series: Stage 1 ULTRA Fiber
• Material: High-performance copper-infused organic fiber
• Hub Style: Sprung center for drivetrain protection
• Manufacturer Part Number: FD12H1
• Application: Street performance and mild racing

Fits 1992-1993 Acura Integra (1.7L).

This Competition Clutch ceramic six-puck sprung disc (MPN 99785-1620) is designed specifically as a replacement component for Competition Clutch assemblies. Engineered for high-performance applications that demand increased torque capacity and aggressive engagement, the six-puck configuration provides improved heat dissipation compared to full-face discs.

The ceramic friction material offers a high coefficient of friction for reliable grab under heavy load, while the sprung hub design helps dampen driveline vibrations and reduces shock during engagement, making it more manageable for street-driven performance vehicles.

• Replacement ceramic six-puck clutch disc
• Sprung hub for vibration damping and smoother engagement
• High-torque ceramic friction material
• Designed for use with Competition Clutch components
• Manufacturer Part Number: 99785-1620

Fits 2002-2005 Subaru WRX.

Maintain the performance and power transfer of your drivetrain with this Competition Clutch Replacement Clutch Disc. This disc is specifically engineered for use with Competition Clutch components, offering a cost-effective solution for refreshing your clutch system when the friction material has reached its service limit but the pressure plate and flywheel remain in good condition.

• Direct replacement disc designed for Competition Clutch assemblies
• Precision manufactured to ensure consistent engagement and torque capacity
• High-quality friction material for reliable performance in street or track conditions
• Manufacturer Part Number: 99740-S

Please note that this replacement disc is designed to be compatible with Competition Clutch kits and may not be compatible with OEM or other aftermarket pressure plates unless specified.

Fits 1990-1995 Toyota MR2 (2.0T). This Competition Clutch ceramic six-puck sprung disc is designed as a direct replacement component for Competition Clutch performance kits. Engineered to handle increased torque loads, the ceramic friction material offers superior heat resistance and a more aggressive bite than standard organic discs, making it suitable for high-performance street and track applications.

The six-puck design maximizes surface area for heat dissipation, while the sprung hub assembly utilizes heavy-duty springs to dampen driveline shock and reduce vibration during engagement. This helps protect your 3S-GTE drivetrain during aggressive shifting and high-RPM launches.

• Manufacturer Part Number: 99719-1620
• Disc Style: 6-Puck Sprung Hub
• Friction Material: Ceramic
• Compatibility: Designed for use with Competition Clutch components
• Engine Fitment: 3S-GTE 2.0L Turbo