All New! Fleece Performance stainless steel turbo stud kit for S-300 and S-400 turbos. Our studs are produced in the USA from aged 630 stainless steel and feature a 4mm internal hex head for easy installation. Impervious to rust and corrosion, these studs not only look good, but allow for higher clamping force. Maximum turbo flange thickness of 3/8" Hot re-torque required.

Ensure a secure and stable installation for your auxiliary lighting with the Baja Designs LP6 universal parts bag. This kit provides the heavy-duty mounting bracket and all necessary hardware required to install a single LP6 series light to your vehicle's mounting surface or bumper.

• Compatible with Baja Designs LP6 Pro and LP6 DOT series lights
• Includes one (1) heavy-duty mounting bracket
• Complete set of high-strength installation hardware included
• Engineered for vibration resistance and off-road durability
• Sold as a single-light mounting kit

Installing a harmonic balancer correctly is critical to the longevity of your crankshaft and engine bearings. This ATI metric adapter stud and washer kit is engineered to properly seat the damper onto the crankshaft snout on GM Duramax and Toyota 2JZ engines, preventing the thread damage common when using standard bolts to pull the damper into place.

Fits GM Duramax and Toyota 2JZ engines requiring an M18x1.5 thread pitch.

• Thread Size: M18 x 1.5
• Length: 3.0"
• Compatibility: GM Duramax and Toyota 2JZ crankshafts
• Application: Harmonic damper installation
• Hardware: Includes high-strength installation stud and matching washer

By using an installation-specific stud, you ensure full thread engagement within the crankshaft before applying the force necessary to press the damper home. This is a must-have tool for any tech or DIY builder working on high-performance 2JZ or heavy-duty Duramax platforms.

Fits select 2002-2007 Subaru WRX and 2004-2011 Subaru STI.

The PERRIN Replacement Hardware Kit provides the specific components required to properly secure and seal the PSP-INT-401 Turbo Inlet Hose. Over time, original installation hardware can become corroded, stripped, or lost during engine maintenance. This kit ensures you have the exact clamps and vacuum fittings needed to maintain an airtight connection between the intake and the turbocharger, preventing unmetered air from entering the system and ensuring consistent boost response.

• Designed specifically for use with PERRIN part number PSP-INT-401.
• Includes all necessary hose clamps and vacuum fittings for a complete refresh.
• Helps prevent vacuum leaks and ensures a secure fit to the turbo compressor inlet.
• High-quality, corrosion-resistant components built for the high-heat environment of the EJ engine bay.

Fits 2020-2025 Jeep Gladiator JT 4WD models (including Rubicon, Sport, Willys, and Overland).

The JKS Manufacturing J-Kontrol suspension lift system provides a comprehensive 3-3.5 inch lift while prioritizing geometry correction and ride quality. Building upon the J-Venture series, this J-Kontrol system adds heavy-duty front control arm correction brackets. These brackets flatten the upper and lower control arm angles to correct caster and restore factory-like handling, making this kit an exceptional choice for daily driving, beach use, and technical trail riding.

Equipped with FOX 2.5 Performance Elite Series shocks, this system is specifically valved to complement the included JSPEC dual-rate coil springs. This combination ensures a smooth ride over highway imperfections while providing the damping required for aggressive off-road articulation. The kit further corrects axle positioning with an adjustable front track bar and a rear track bar bracket, while JKS Quicker-Disconnect sway bar links allow for immediate flexibility on the trail.

• 3-3.5 inch lift height for improved ground clearance and tire clearance
• FOX 2.5 Performance Elite Series shocks tuned specifically for the Gladiator JT suspension
• Front control arm correction brackets optimize caster and improve handling stability
• JSPEC heavy-duty dual-rate coil springs designed for consistent ride quality across all terrain
• Front adjustable track bar and rear track bar bracket for precise axle centering
• JKS Quicker-Disconnect front sway bar links and rear links for increased off-road articulation
• Front and rear bump stop extensions to safely limit suspension up-travel

Fits 2020-2025 Jeep Gladiator JT 4WD (Sport, Rubicon, Overland, Willys, and select submodels).

The JKS J-Kontrol suspension system provides 3 to 3.5 inches of lift, engineered to increase ground clearance while significantly improving the handling and ride quality of your Jeep Gladiator. Building on the J-Venture series, the J-Kontrol system includes front control arm correction brackets. These brackets flatten the upper and lower control arm angles to restore factory-spec caster, resulting in more stable steering and reduced brake dive for a better daily driving experience.

Each kit features JSPEC dual-rate coil springs designed for consistent performance across varied terrain and Fox 2.0 Performance Series shocks specifically valved for this JT-specific application. To ensure proper axle centering and suspension geometry, the system includes a heavy-duty adjustable front track bar and a rear track bar bracket. For increased off-road articulation, JKS Quicker-Disconnect sway bar links are provided, allowing you to easily unpin the front sway bar for maximum travel on the trails.

• Front/Rear FOX 2.0 Performance Series Shocks for improved damping control on and off-road
• Front Control Arm Correction Brackets to restore caster and improve handling geometry
• JSPEC HD Dual-Rate Coil Springs for superior ride quality and increased load capacity
• Front Adjustable Track Bar and Rear Track Bar Bracket for precise axle alignment under the chassis
• Front Quicker Disconnects and Rear Sway Bar Links for increased articulation
• Front and Rear Bump Stop Extensions to properly limit suspension up-travel

Fits 2017-2021 Ford F-150 Raptor models.

The ICON Multi-Rate Leaf Spring Kit is designed to optimize the rear suspension of the second-generation Raptor, providing a significant upgrade in ride quality, load handling, and off-road durability. This multi-rate design allows for a refined initial stroke to soak up small chatter while providing the necessary support for high-speed impacts and heavy bed loads. Each spring pack has undergone "ICON 1K" testing, enduring over 1,000 miles of high-intensity off-road use to validate its performance, strength, and long-term durability.

This kit replaces the factory leaf packs and is engineered to maintain a controlled stance under various driving conditions. Please note that for proper clearance and component protection, a bump stop spacer kit is required if you are not using ICON's hydraulic bump stop system.

• Direct replacement for OEM leaf springs on 2017-2021 Ford F-150 Raptor
• Multi-rate configuration for improved comfort and bottoming resistance
• ICON 1K tested to ensure survival in punishing off-road environments
• Compatible with ICON hydraulic bump stop kit (PN: 95121)
• Required: Bump stop spacer kit (PN: 95226) must be used if PN: 95121 is not installed

Fits 2007-2021 Toyota Tundra.

The ICON RXT Multi-Rate Leaf Pack Hardware Kit provides the specialized components needed to secure ICON RXT leaf springs to the rear axle. This kit is designed to handle the increased demands of an off-road suspension system, ensuring that your multi-rate leaf packs remain properly seated and indexed throughout the full range of travel. Whether you are installing a new set of RXT springs or refreshing your hardware after years of trail use, these high-strength fasteners provide the reliability required for heavy-duty applications.

• Engineered specifically for 2007-2021 Toyota Tundra fitment
• Directly compatible with ICON RXT Multi-Rate Leaf Pack systems
• Ensures proper spring alignment and secure axle mounting
• Built to withstand the stresses of off-road articulation and heavy loads

Fits 2005-UP Toyota Tacoma models.

The ICON Vehicle Dynamics Leaf Spring Hardware Kit is engineered to provide a secure and reliable mounting solution for your truck's rear suspension. This kit is essential when installing aftermarket leaf packs or performing maintenance on the factory suspension system. By using high-strength components, this hardware ensures that the leaf springs remain properly seated and aligned against the axle housing, preventing spring shift during off-road articulation or under heavy hauling conditions.

• Designed specifically for 2005-UP Toyota Tacoma rear leaf spring applications
• Provides necessary hardware for secure leaf spring-to-axle installation
• Compatible with ICON multi-rate leaf spring packs and factory replacements
• High-strength construction to withstand increased suspension cycling and loads

This heavy-duty ICON Vehicle Dynamics hardware component is engineered for high-load automotive applications, providing a stable bearing surface and ensuring even load distribution for critical fasteners. Whether used in suspension assembly, shock mounting, or custom fabrication, this washer is built to maintain structural integrity under stress.

• Outer Diameter (OD): 2.125 inches
• Inner Diameter (ID): 0.565 inches
• Thickness: 0.188 inches
• Material Finish: Corrosion-resistant Zinc Plating
• Application: Universal automotive and suspension use

Precision-stamped and finished with a durable zinc coating, this washer is designed to withstand harsh undercar environments and resist oxidation, ensuring a long-lasting, secure fit for your project.

Fits 2025-2026 RAM 1500.

The Eibach Ride Height Correction Link provides a mechanical solution for adjusting the factory ride height. These links replace the fixed-length factory components to modify the input to the vehicle's leveling sensors, allowing you to fine-tune the stance for a leveled look or improved clearance without major suspension modifications.

• Direct replacement for factory leveling sensor links
• Enables precise ride height adjustment
• Durable construction designed for harsh undercar environments
• Manufacturer Part Number: LK31-27-016-01-20

Upgrade your engine hardware with the BLOX Racing Stainless Steel Intake and Exhaust Manifold Stud Kit. These studs are designed to replace brittle or corroded factory hardware, providing a high-strength mounting solution that resists the extreme thermal cycling common in intake and exhaust environments.

Crafted from premium stainless steel, these studs offer superior corrosion resistance and durability compared to standard OEM fasteners, preventing the common issue of studs seizing or snapping during manifold maintenance. The 55mm length and M10x1.25 thread pitch make this kit a versatile choice for builders and technicians requiring reliable hardware for high-performance applications.

• Material: High-strength Stainless Steel
• Thread Pitch: M10 x 1.25
• Total Length: 55mm
• Quantity: 11-Piece Kit
• Application: Compatible with various intake and exhaust manifold configurations requiring M10x1.25 hardware

Upgrade your hardware with these high-strength metric fasteners from ARP. These M10 x 1.50 bolts feature a standard external hex head and are engineered for reliable clamping force in demanding automotive applications. Each bolt is finished with a durable black oxide coating for corrosion resistance and a professional appearance under the hood or chassis.

• Manufacturer Part Number: 662-1006
• Thread Size: M10 x 1.50
• Under-Head Length: 45mm
• Head Style: Hex
• Finish: Black Oxide
• Package Quantity: 5 Bolts

Fits select 1992-2001 Acura Integra GS-R and Type R, Honda Civic Si, and Civic del Sol VTEC models. This 40-piece hardware kit is engineered specifically for B-series VTEC valve covers, providing a flush-mounted finish that is over 75% thinner than the factory nut and washer combination.

Unlike generic dress-up kits, Skunk2 uses a proprietary standoff design that replaces your factory mounting studs. This allows you to secure the camshaft caps to factory torque specifications while providing the necessary clearance for the low-profile washers. The kit includes Viton O-rings to ensure a reliable, leak-free seal and is compatible with OEM valve covers and most aftermarket spark plug wire covers.

• Construction: CNC-machined 6061-T6 billet aluminum washers and stainless steel hardware
• Finish: Clear hard-anodized for superior corrosion resistance
• Sealing: High-temp Viton O-rings included
• Components: 40-piece kit includes 12 low-profile washers, 12 flush-mount bolts, standoffs, and extensions
• Branding: Laser-etched Skunk2 logo
• Manufacturer Part Number: 649-05-0110

Upgrade your hardware with this ARP 12-point nut kit, engineered for high-performance applications where reliability and torque accuracy are critical. These precision-machined fasteners feature a 12-point head design, which offers increased wrench contact area compared to standard hex nuts. This design allows for higher torque loads and prevents rounding in tight engine or chassis compartments.

Manufactured from high-strength materials, these nuts provide the consistent clamping force required for professional-grade builds. Whether you are securing suspension components or internal engine hardware, ARP fasteners are the industry standard for durability and thread integrity.

• Thread Size: 12mm x 1.25
• Socket/Wrench Size: 16mm
• Head Style: 12-Point
• Quantity: 10 Pack
• Manufacturer Part Number: 301-8400

Fits 1995-1998 Nissan 240sx models.

The ISR Performance Eccentric Lockout Kit (IS-EL-S14) is an essential upgrade for S14 chassis owners who demand consistent alignment settings during aggressive driving. On vehicles used for drifting or track days, the factory eccentric adjustment bolts are prone to slipping within their slots under heavy lateral loads, causing sudden and unwanted changes to rear camber or toe.

This kit replaces the factory eccentric washers with precision-cut square lockout plates, effectively locking the bolt in a fixed position. By utilizing this kit in conjunction with adjustable aftermarket control arms, you transfer the adjustment responsibility to the arm's turnbuckle, ensuring your suspension geometry remains locked in regardless of track conditions.

• Manufacturer Part Number: IS-EL-S14
• Eliminates alignment slippage caused by factory eccentric bolts
• Recommended for use with adjustable rear camber and toe arms
• Precision-engineered lockout plates for a secure fit
• Direct replacement for OEM eccentric hardware on the S14 rear subframe

The ARP 200-8634 Hex Nut Kit provides a reliable fastening solution for mechanical and automotive assemblies requiring a 3/8-24 thread pitch. Unlike standard commercial hardware, these nuts are precision-machined to exacting tolerances to ensure consistent torque loading and superior thread engagement under high-stress conditions. This 10-piece kit is ideal for securing manifold, chassis, or drivetrain components where fastener failure is not an option.

• Thread Size: 3/8-24
• Nut Type: Hex
• Package Quantity: 10-Piece Set
• Manufacturer Part Number: 200-8634

Fits Chevrolet 90-degree V6 and 265-454 V8 engines equipped with a 1-piece rear main seal.

The ARP 200-2906 Flexplate Bolt Kit provides the essential strength and reliability required for high-performance drivetrain applications. These fasteners are designed to replace standard OE hardware, offering superior clamping force to keep the flexplate securely attached to the crankshaft during high-RPM operation. Engineered for maximum durability, these bolts are a critical upgrade for performance builds where standard fasteners may be prone to stretching or failure.

• Manufacturer Part Number: 200-2906
• Compatible Engines: Chevrolet 90-degree V6 and 265-454 V8
• Rear Seal Compatibility: 1-piece rear main seal
• Engineered for high-strength durability and consistent clamping force
• Designed specifically for flexplate-to-crankshaft mounting

The Torque Solution HD Cam Bolt Kit is a high-strength alternative to the soft factory hardware found on Subaru EJ series engines. Designed specifically for Single AVCS (Active Valve Control System) configurations, these heavy-duty bolts are essential for engine builds or timing belt services where original fasteners are prone to stripping or rounding during removal.

Precision-engineered to handle the specific torque requirements of the EJ valvetrain, these bolts ensure that intake or exhaust cam gears remain securely seated under high-load conditions. Replacing worn or damaged OE bolts with these HD versions provides peace of mind during installation and future maintenance by resisting head deformation.

• Direct replacement for factory cam gear hardware
• Engineered for Single AVCS Intake (IN) or Exhaust (EX) camshafts
• Heavy-duty construction prevents stripping and ensures accurate torque retention
• Essential for engine rebuilding and timing assembly
• Manufacturer Part Number: TS-SU-626-2-N-2

Secure your harness system with the RaceQuip Snap Hook End Seat Belt Mounting Hardware. Designed for competition and performance applications, this hardware provides a reliable attachment point for racing harnesses, allowing for quick installation or removal when paired with standard eyebolts.

Constructed from forged steel, this mounting end is engineered to withstand the high-tensile loads encountered in motorsport environments. The black finish offers a professional appearance while protecting the component from corrosion. This specific model is sized to accommodate 3-inch wide webbing, ensuring a proper fit for wide-format shoulder or lap belts.

• Manufacturer Part Number: 700940
• Material: Heavy-duty forged steel
• Compatibility: Fits 3-inch wide seat belts and harnesses
• Finish: Black coating
• Attachment Style: Snap hook

Secure your racing harness with the RaceQuip 700910 Long Reach Bolt-On End mounting hardware. This essential component provides a robust anchor point for both 2-inch and 3-inch wide seat belts, ensuring your restraint system is properly fastened to the vehicle chassis or roll cage mounting points.

Forged from high-strength steel, this hardware features a long-reach profile specifically designed to solve clearance issues in tight cockpits or custom seating configurations. The durable black finish provides long-lasting corrosion resistance, making it suitable for the rigors of competitive motorsports and track-day use.

• Forged steel construction for maximum structural integrity
• Universal design fits 2-inch and 3-inch wide webbing
• Bolt-on configuration for secure chassis or bracket installation
• Long-reach design provides extra clearance where needed
• Black finish for a professional look and corrosion protection
• Manufacturer Part Number: 700910

Fits select 1996-2024 Toyota 4Runner, Tacoma, Tundra, Sequoia, FJ Cruiser, and Lexus GX460/GX470.

The Camburg UCA Bushing Pivot Washer Kit (CAM-010109) provides the essential replacement hardware needed to service your Camburg tubular upper control arms. These washers are specifically designed for use with polyurethane bushings, providing a smooth, durable mating surface that ensures proper pivot function and protects the bushings from premature wear.

Constructed from high-quality steel and finished with a protective zinc plating, these washers offer excellent corrosion resistance for long-term off-road durability. This kit includes the exact hardware required to refresh one pair of control arms, returning your suspension pivot points to their original factory specifications.

• Specifically designed for Camburg tubular upper control arms
• Optimized for use with polyurethane pivot bushings
• Zinc plated finish for superior corrosion and rust resistance
• Includes all necessary washers for a complete pair of arms
• Manufacturer Part Number: CAM-010109

Fits 2009-2019 Cadillac CTS V and Chevrolet Camaro ZL1.

Whether you are performing a clutch replacement or installing a new performance flywheel, the McLeod Bolt Pak provides the durability and clamping force required for high-performance GM LS-based engines. These high-strength 11mm fasteners are engineered to handle the high-torque demands of street and racing applications, ensuring a secure connection to the crankshaft for maximum drivetrain integrity.

Manufactured from premium steel, each bolt features a durable black oxide coating to resist corrosion and ensure long-term reliability. These fasteners are a critical upgrade or replacement for worn factory hardware, offering peace of mind and precision during installation.

• Brand: McLeod Racing
• Series: Bolt Pak
• MPN: 1558
• Thread Size: 11mm
• Quantity: 8 Bolts per box
• Material: High-strength steel
• Finish: Black oxide coating

Vehicle Applications:

• 2009-2015 Cadillac CTS V
• 2012-2015 Chevrolet Camaro ZL1
• 2017-2019 Chevrolet Camaro ZL1

Upgrade your engine bay or body panels with the NRG TI Series Titanium Fender Washer Kit (FW-200TT). This premium 10-piece hardware set replaces standard fasteners with lightweight, high-strength titanium for a custom, high-end look and superior corrosion resistance.

Specifically engineered for plastic mounting applications, these M6 bolts feature the signature NRG "TI Burn" finish, providing a distinct multicolored gradient. These washers are designed to distribute clamping pressure across a wider surface area, which helps prevent cracking or stress on plastic components while providing a secure fit. This kit is ideal for engine covers, interior plastics, and decorative exterior mounting points.

• Material: High-grade Titanium (TI Series)
• Finish: TI Burn (Burnt Titanium Gradient)
• Bolt Size: M6
• Thread Application: Optimized for plastic components
• Quantity: Set of 10 washers and 10 bolts
• Manufacturer Part Number: FW-200TT

Professionalize your engine bay or secure body panels with the NRG Innovations Fender Washer Kit. This hardware set is specifically designed for metal surfaces where traditional bolt-on hardware may not be feasible, utilizing rivets to provide a clean, permanent, and high-strength mounting solution.

• Manufacturer Part Number: FW-110BK
• Quantity: Set of 10 Washers and 10 Rivets
• Finish: Black Anodized
• Application: Universal for metal surfaces and engine bay dress-up
• Securely mounts panels or accessories for a professional custom look

Secure plastic body panels, bumper covers, and engine bay shrouds with the NRG Fender Washer Kit. Unlike standard fasteners that may pull through or vibrate loose, these M6 bolt rivets are engineered specifically to provide a firm, threaded grip in plastic materials, replacing brittle factory clips with a durable and high-profile hardware solution.

• Includes 10 black anodized aluminum fender washers
• Includes 10 color-matched M6 bolt rivets optimized for plastic mounting
• Designed for engine bay dress-up and secure exterior panel fitment
• Corrosion-resistant finish for long-lasting durability
• Manufacturer Part Number: FW-150BK

Secure plastic body panels, bumper covers, and fender flares with precision using the NRG Fender Washer Kit. Specifically engineered for applications where traditional hardware may pull through or damage plastic surfaces, this kit uses rivets to ensure a permanent and reliable hold. The hard-anodized purple finish provides an aesthetic upgrade to your engine bay or exterior while resisting corrosion.

• Designed specifically for use on plastic panels and components
• Includes 10 purple anodized fender washers and 10 matching rivets
• Provides a larger surface area to prevent panel pull-through
• Ideal for custom widebody kits, bumper tucks, and interior panels
• Manufacturer Part Number: FW-100PP

Fits select 2006-2013 BMW 128i, 135i, 325i, 328i, 330i, 335i, and 335d (Non-M Chassis).

The factory eccentric bolts provided by BMW for camber and toe adjustments are prone to slipping under high cornering loads, leading to unpredictable rear alignment changes. The SPL Parts Eccentric Lockout (EL) kit replaces these stock bolts with solid lockout plates to ensure your alignment settings remain fixed, even during aggressive track use. Note that adjustable control arms are required to set camber and toe once the stock eccentric adjustment is eliminated.

These lockout plates are precision CNC machined from 6061-T6 aluminum for a perfect fit and long-term durability. Each kit includes high-strength CAD-plated grade 10.9 hardware to provide a secure, zero-slip solution for your rear suspension. Engineered and manufactured in the USA.

• Eliminates slipping factory eccentric bolts
• Maintains precise rear alignment under heavy loads
• CNC machined 6061-T6 aluminum lockout plates
• Cadmium-plated grade 10.9 hardware included
• Complete kit for one vehicle (camber arm locations)
• Manufacturer Part Number: SPL EL E9X
• Proudly Made in the USA

This ARP M9 x 1.25 12-point nut kit (part number 300-8362) provides professional-grade fastening for critical automotive applications. The 12-point head design offers a superior grip surface for higher torque applications and easier tool engagement in tight clearances compared to traditional hex-style fasteners.

• Thread Size: M9 x 1.25
• Head Style: 12-Point
• Quantity: 10-Pack
• Manufacturer Part Number: 300-8362
• Precision machined for consistent thread engagement and uniform load distribution.

Fits 2003-2022 Dodge and Ram 2500/3500 equipped with the 5.9L or 6.7L Cummins turbo diesel engine.

Ensure a reliable, leak-free seal on your injector tubes and high-pressure injection lines with these premium fuel supply tube nuts from Fleece Performance. Manufactured from 300 series stainless steel, these high-tolerance nuts are designed to resist corrosion and provide a superior fit compared to standard hardware. Whether you are performing a routine injector service or building a high-pressure fuel system, these stainless nuts provide the durability and precision required for the Cummins common rail platform.

• Manufactured from 300 series stainless steel for maximum corrosion resistance
• High-tolerance machining ensures a precise seal on injector tubes and high-pressure lines
• Manufacturer Part Number: FPE-CUMM-SSFTN
• Replaces Cummins P/N: 5264181, 3946625, 4893739
• Replaces Mopar P/N: 5086866AB
• Replaces Bosch P/N: F00RJ00437