Fits 1958-1964 Chevrolet full-size models including Impala, Bel Air, Biscayne, and El Camino.

Ridetech StrongArms rear lower trailing arms provide a significant strength and geometry upgrade for vehicles equipped with CoolRide air spring systems. These heavy-duty tubular components replace factory stamped-steel arms, eliminating flex and improving rear axle stability. Each arm is engineered to withstand the increased loads of air suspension while maintaining proper driveline alignment.

• Specifically designed for use with CoolRide air springs
• Heavy-wall tubular steel construction for maximum rigidity
• Pre-installed polyurethane bushings for improved articulation and service life
• Satin black powder-coated finish for superior corrosion resistance
• Includes a pair of trailing arms, sleeves, and all necessary mounting hardware
• Direct-fit replacement using factory mounting points
• Manufacturer Part Number: 11054499

Fits select 1958-1964 Chevrolet full-size models, including Bel Air, Biscayne, Impala, El Camino, and Nomad.

Ridetech StrongArms front upper control arms provide a bolt-on solution to modernize the suspension geometry of your classic Chevy. These tubular arms replace factory stamped steel components, offering significantly increased strength and improved handling characteristics. Designed to optimize ball joint angles and alignment, they ensure more predictable cornering and reduced tire wear.

• Tubular steel construction for superior rigidity and durability
• Precision-machined Delrin bushings eliminate deflection and binding
• Includes high-quality ball joints and cross shafts for a complete installation
• Satin black powder coat finish for maximum corrosion resistance
• Corrects suspension geometry for better camber and caster gain
• Manufacturer Part Number: 11053699
• Sold as a pair

Fits select 1958-1964 Chevrolet Bel Air, Biscayne, Brookwood, Del Ray, El Camino, Impala, Kingswood, Nomad, Parkwood, Sedan Delivery, and Yeoman.

The Ridetech HQ Series Front CoilOver system delivers high-performance handling and tunable ride quality for classic GM B-Body applications. These coilovers are engineered specifically for use with Ridetech lower control arms, providing a modern suspension solution that replaces outdated factory spring and shock configurations. The HQ Series (Handling Quality) shocks feature a monotube design with manual rebound adjustment, allowing you to dial in the damping characteristics to suit your specific driving environment.

• Rebound Adjustability: Features 24-position rebound adjustment to fine-tune ride quality and handling response.
• Premium Construction: High-quality coil springs paired with impact-forged shock bodies for consistent performance under load.
• Anti-Friction Design: Includes Delrin spring washers to reduce friction and prevent spring binding during adjustment or compression.
• Bolt-On Integration: Specifically designed to mount to Ridetech lower control arms for a simplified installation process.

Includes: (2) Rebound adjustable HQ Series shocks, (2) coil springs, spring mounts, and Delrin spring washers. Manufacturer Part Number: 11053510.

Fits 1958-1964 Chevrolet full-size models including Impala, Bel Air, Biscayne, El Camino, and various station wagon/utility platforms.

Ridetech StrongArms are engineered to solve the geometry and clearance issues common with factory stamped-steel arms. These front lower control arms are designed specifically for use with Ridetech Shockwaves or Coil-Overs, providing a precise mounting point and optimized travel for lowered ride heights. The heavy-duty tubular steel construction offers superior strength over OEM components while maintaining a clean, professional look.

• Specifically designed for compatibility with Ridetech Shockwaves and Coilovers
• Fabricated from heavy-wall tubular steel for maximum rigidity
• Includes pre-installed high-quality ball joints and cross shafts
• Low-friction Delrin bushings provide smooth movement without the deflection or squeaking of polyurethane
• Durable satin black powder-coated finish for long-lasting corrosion resistance
• Manufacturer Part Number: 11052899

Each set includes a pair of fully assembled front lower control arms ready for bolt-on installation to your factory chassis mounting points.

Fits select 1958-1964 Chevrolet Bel Air, Biscayne, Brookwood, Del Ray, El Camino, Impala, Kingswood, Nomad, Parkwood, Sedan Delivery, and Yeoman.

Upgrade your X-frame Chevrolet's front suspension with Ridetech StrongArms. These tubular front lower control arms are engineered specifically for use with Ridetech CoolRide air spring systems, providing a significant strength and geometry improvement over factory stamped-steel components. The arms feature a durable satin black powder-coated finish and come fully assembled with high-quality components for a straightforward installation.

Built for long-term performance and ride quality, these StrongArms utilize Delrin bushings to eliminate the deflection and stiction common with standard rubber or poly bushings. This ensures smooth suspension travel and precise alignment maintenance under load, whether you are cruising or cornering.

• Precision-bent tubular steel construction for maximum rigidity and clearance
• Satin black powder-coated finish for superior corrosion resistance
• Low-friction Delrin bushings provide smooth, quiet operation without squeaks
• Includes pre-installed ball joints and heavy-duty cross shafts
• Optimized geometry specifically for use with CoolRide air spring kits
• Sold as a pair for a complete front lower refresh
• Manufacturer Part Number: 11051499

Fits select 1958-1964 Chevrolet full-size models including Bel Air, Biscayne, El Camino, and Impala. This Ridetech Front CoolRide Kit (MPN 11050910) is a high-performance air suspension solution engineered specifically for use with Ridetech lower StrongArms. By replacing the rigid factory coil springs with heavy-duty air springs and HQ Series shocks, this kit provides a significant upgrade in ride quality and adjustable stance.

The included HQ Series shocks feature impact-forged aluminum bodies and 24-position rebound adjustment, allowing you to fine-tune the dampening to your specific driving preferences. The system utilizes heavy-duty bolt-on shock mounts to relocate the dampers, ensuring optimal suspension geometry and clearance during travel. This kit is designed for straightforward installation using standard hand tools.

• Manufacturer Part Number: 11050910
• Series: CoolRide (Front)
• Compatibility: Requires use of Ridetech lower StrongArms
• Shock Type: HQ Series single-adjustable rebound shocks
• Mounting: Includes bolt-on shock mounts and brackets
• Included Hardware: Air springs, brackets, HQ Series shocks, mounts, and all necessary fasteners

Fits select 1958 Chevrolet models including Bel Air, Biscayne, Brookwood, Del Ray, Impala, Nomad, Sedan Delivery, and Yeoman.

The Ridetech rear upper StrongArm is engineered to eliminate the flex and instability common with factory stamped-steel control arms on X-frame Chevrolets. This heavy-duty tubular component provides a direct bolt-on solution for improved axle housing control and more precise handling. By replacing the compliant OE rubber bushings with high-performance Delrin bushings, this arm reduces deflection and prevents binding during suspension travel, ensuring a smoother and more controlled ride.

• Heavy-duty tubular steel construction for increased rigidity and strength
• Includes Delrin bushings and sleeves for reduced friction and long-lasting performance
• Durable satin black powder-coated finish for superior corrosion resistance
• Direct replacement for the factory rear upper control arm
• Manufacturer Part Number: 11046699

Fits 1955-1957 Chevrolet Bel Air, One-Fifty Series, and Two-Ten Series models equipped with a two-piece frame.

The Ridetech Bolt-On 4-Link system is engineered to replace the restrictive factory leaf spring suspension on Tri-Five Chevrolets, providing superior axle control and significantly improved ride quality. This kit utilizes a bolt-on chassis crossmember to simplify installation and maintain structural integrity. The system includes heavy-duty bars featuring single adjustability, allowing for precise fine-tuning of the rear suspension geometry. To ensure smooth, bind-free articulation, the kit is equipped with R-Joint technology, which combines low-friction movement with high-impact durability.

• Specifically designed for 1955-1957 Chevrolet "Two-Piece" frame configurations
• Single adjustable link bars for customizable suspension tuning
• Low-friction R-Joints eliminate bind and noise
• Includes bolt-on chassis crossmember and diagonal link for lateral stability
• Weld-on axle brackets for a secure, high-strength attachment
• Durable black coated finish for corrosion resistance
• Manufacturer Part Number: 11037199

Note: This 4-link system is designed for use with Ridetech Shockwaves or Coil-Overs (sold separately).

Fits 1955-1957 Chevrolet Bel Air, One-Fifty Series, Two-Ten Series, and Sedan Delivery.

The Ridetech Front MuscleBar is engineered to eliminate the excessive body roll common in Tri-Five Chevrolets, providing flatter cornering and improved driver feedback. This high-rate sway bar is specifically designed to clear the suspension geometry and steering components on vehicles equipped with Ridetech StrongArms lower control arms. By utilizing precision-fit polyurethane bushings and high-quality end links, this kit provides immediate response compared to worn factory setups.

• Chassis Stability: Reduces body roll and improves weight transfer during cornering.
• Compatibility: Specifically designed for use with Ridetech StrongArms (not compatible with factory lower arms).
• Premium Hardware: Includes heavy-duty end links, greasable polyurethane bushings, and mounting brackets.
• Durable Construction: Precision-bent high-tensile steel with a durable finish for long-lasting performance.
• Part Number: 11019100

Fits 1955-1957 Chevrolet Bel Air, One-Fifty Series, and Two-Ten Series with Ridetech Bolt-On 4-Link suspension.

The Ridetech HQ Series Rear CoilOver Pair is engineered to provide superior handling and ride quality for Tri-Five Chevrolets equipped with the Ridetech Bolt-On 4-Link system. These coilovers replace standard shocks and springs with a high-performance monotube design featuring impact-forged aluminum bodies for exceptional strength and heat dissipation.

Each shock in the HQ (Handling Quality) series offers 24 positions of rebound adjustment, giving you the ability to fine-tune your suspension to your specific driving style or road conditions. The included high-tensile springs are paired with Delrin spring washers to eliminate binding and noise during compression, ensuring smooth and consistent operation.

• Designed specifically for use with Ridetech Bolt-On 4-Link systems
• 24-position rebound adjustment for precise ride tuning
• Impact-forged monotube aluminum shock bodies
• Includes high-tensile springs and mounting hardware
• Delrin spring washers prevent spring binding
• Manufacturer Part Number: 11016510

Fits 1955-1957 Chevrolet Bel Air, One-Fifty Series, Two-Ten Series, Nomad, and Sedan Delivery.

Ridetech StrongArms provide a significant geometry upgrade for the Tri-Five front suspension. These tubular front upper control arms are designed to replace factory stamped steel components, offering increased rigidity and a corrected caster for improved high-speed stability and steering response. Each arm is equipped with tall ball joints to optimize the camber curve, keeping more of the tire contact patch on the road during cornering.

• Pair of tubular front upper control arms for improved suspension geometry
• Tall ball joints included to refine the camber curve and handling
• Self-lubricating Delrin bushings minimize deflection and eliminate binding
• Includes precision-machined cross shafts for direct bolt-on installation
• Finished in a durable satin black powder coat for long-lasting corrosion resistance
• Manufacturer Part Number: 11013699

Fits 1955-1957 Chevrolet Bel Air, One-Fifty Series, Two-Ten Series, and Sedan Delivery.

Upgrade your Tri-Five Chevy’s front suspension with this pair of Ridetech HQ Series CoilOvers. These units are engineered to provide superior handling and ride quality through 24-position rebound adjustability, allowing you to fine-tune the damping for your specific driving style. Specifically designed for use with Ridetech lower control arms, these coilovers feature a monotube design for consistent, fade-free performance.

• Includes 24-position rebound adjustable shocks for precise damping control
• High-tensile springs included for optimized ride height and support
• Includes spring mounts and Delrin spring washers for smooth, quiet operation
• Designed for seamless integration with Ridetech lower arms
• Manufacturer Part Number: 11013510

Fits select 1955-1957 Chevrolet Bel Air, One-Fifty Series, Two-Ten Series, and Sedan Delivery models.

Ridetech Front Lower StrongArms provide a significant upgrade over factory stamped steel arms, specifically engineered for use with Shockwave or CoilOver suspension systems. These tubular control arms optimize suspension geometry and eliminate the flex common in original components, providing a more stable and predictable steering feel during cornering.

• Manufactured from heavy-wall tubular steel for maximum strength and durability
• Pre-installed with premium ball joints and cross shafts for a direct bolt-on installation
• Injection-molded Delrin bushings eliminate deflection and stiction for smoother suspension travel
• Integrated shock mounts designed to accept Ridetech CoilOvers or Shockwaves
• Finished in a durable satin black powder coat for long-lasting corrosion resistance
• Manufacturer Part Number: 11012899

Each set includes a pair of lower control arms with all necessary hardware for a complete installation on the factory mounting points.

Fits select 1964-1974 Buick, Chevrolet, GMC, Oldsmobile, and Pontiac models equipped with Ridetech AFX C7 hub spindles.

These Ridetech caliper brackets allow you to adapt C5 or C6 Corvette brake calipers to your vehicle when using AFX C7 hub spindles. Precision-engineered to ensure proper alignment and spacing, these brackets are essential for builders looking to upgrade their stopping power using widely available Corvette brake components. The high-strength construction handles the increased torque loads of performance braking systems.

• Specifically designed for Ridetech AFX C7 hub spindles
• Compatible with C5 and C6 Corvette brake calipers
• Includes a pair of brackets (left and right)
• Includes all necessary mounting hardware
• Manufacturer Part Number: 11009546

Fits select 1964-1974 GM A-Body, F-Body, and X-Body vehicles including Chevelle, Camaro, Firebird, Nova, and GTO.

The Ridetech AFX Hub Spindle system modernizes classic muscle car suspension by integrating late-model Corvette hub and brake technology. Engineered with a 1.75-inch taller height than factory spindles, these components drastically improve negative camber gain and roll center geometry for superior handling and cornering stability. The built-in 2-inch drop allows for a lower stance without compromising suspension travel or geometry.

These spindles are designed to utilize C5, C6, or C7 Corvette hubs (C7 preferred for strength and cost-efficiency), providing a significant upgrade in bearing durability and braking consistency. They maintain stock track width and are finished in a durable black E-coat for long-lasting corrosion resistance.

• Manufacturer Part Number: 11009312
• 2-inch drop for a lower center of gravity
• 1.75-inch taller spindle height improves camber gain and roll center
• Compatible with C5, C6, and C7 Corvette hubs
• Accepts C5 and C6 Corvette brake systems (OE and aftermarket)
• Durable black E-coat finish
• Maintains factory track width
• Ridetech caliper brackets (Part # 11009546) required for installation (sold separately)
• 100% manufactured in the USA

Fits select 1964-1974 GM A-Body, F-Body, and X-Body vehicles, including Chevrolet Camaro, Chevelle, and Nova; Pontiac GTO, Firebird, and LeMans; Oldsmobile Cutlass and 442; and Buick Skylark and GS.

Improve the handling and stance of your vintage GM muscle car with this pair of Ridetech tall spindles. These spindles serve two primary functions: providing a 2-inch drop for a lower center of gravity and utilizing a taller-than-stock design to correct the factory's poor camber curve. By improving the suspension geometry, these spindles maintain a better tire contact patch during hard cornering for superior grip and more predictable handling.

• Lowered Stance: Provides a 2-inch drop to achieve a modern aggressive look without sacrificing suspension travel.
• Improved Geometry: Tall spindle design optimizes the camber gain to keep tires flatter on the pavement during cornering.
• Direct Fit: Designed to bolt into factory mounting points on A, F, and X-Body platforms.
• Complete Hardware: Includes a pair of spindles, castle nuts, and cotter pins for a complete installation.
• Manufacturer Part Number: 11009300