Fits 1976-1986 Jeep CJ7.

Strengthen your Jeep's suspension while adding a subtle height increase with Fishbone Offroad Heavy Duty Greaseable Shackles. These shackles are designed to replace flimsy factory hardware with 3/8-inch thick zinc-plated steel, providing significantly better resistance to deflection and trail abuse. The integrated grease zerks allow for easy maintenance of the polyurethane bushings, ensuring quiet operation and smooth suspension cycling without the bind often associated with dry bushings.

This kit provides approximately 1/2-inch of lift and is designed specifically for front-end installation. The increased thickness over stock components helps maintain shackle alignment under load, improving overall handling and durability for both daily driving and off-road use.

• Manufacturer Part Number: FB27225
• Fits 1976-1986 Jeep CJ7 models
• Provides 1/2-inch of suspension lift
• 4-inch center-to-center bolt spacing
• Constructed from heavy-duty 3/8-inch thick steel
• Durable zinc-plated finish for superior corrosion resistance
• Includes greaseable hardware and durable polyurethane bushings
• Sold as a set of 2 for front axle application

Fits select 1979-1994 Toyota Pickup and 1984-1985 Toyota 4Runner.

Properly maintaining Old Man Emu leaf spring bushings is critical for long-term suspension performance and longevity. The ARB Old Man Emu Greasable Shackle Kit (OMEGS4) simplifies this maintenance by allowing you to lubricate the bushings through integrated grease nipples. This design eliminates the need to remove the shackles for service, significantly reducing the time and effort required to keep your leaf springs operating smoothly.

• Integrated grease nipples allow for lubrication without shackle disassembly
• Side plates are zinc-plated to provide a durable barrier against corrosion
• Facilitates periodic lubrication to extend the life of OME leaf spring bushings
• Designed for front suspension fitment
• Includes all necessary hardware for the shackle assembly
• Manufacturer Part Number: OMEGS4

Fits all 1987-1995 Jeep Wrangler YJ models including Base, Sahara, Laredo, and Sport.

The Rugged Ridge HD Leaf Spring Shackle Kit is a comprehensive solution for Jeep owners looking to gain additional clearance and improve suspension serviceability. This heavy-duty kit provides 1 inch of lift, allowing for slightly larger tires and improved approach/departure angles. Featuring a greasable design, these shackles allow for regular maintenance to ensure smooth suspension cycles and eliminate the squeaks commonly found in factory non-serviceable units.

• Provides 1 inch of additional suspension lift
• Greasable design for reduced friction and noise
• Includes two (4) heavy-duty shackles (2 front and 2 rear)
• Bolts directly to factory mounting points
• Manufacturer Part Number: 18265.22
• Limited 5-Year Warranty

Fits 1955-1975 Jeep CJ3, CJ5, and CJ6, including Willys models. These heavy-duty leaf spring shackles are designed for Jeep owners looking to gain additional tire clearance and improve suspension serviceability.

Constructed from durable steel, these shackles provide exactly 1 inch of lift over stock height. They feature a greaseable design that allows for regular maintenance to ensure quiet operation and smooth suspension articulation. These units are a direct bolt-on replacement for factory hardware, requiring no drilling for installation. Please note that bushings are not included and must be sourced separately or reused if in good condition.

• Provides 1 inch of additional lift
• Heavy-duty steel construction for off-road durability
• Greaseable design for easy maintenance and reduced friction
• Direct bolt-on application; no drilling required
• Sold as a pair (replaces one axle)
• Manufacturer Part Number: 18265.02
• Limited 5-Year Warranty

Upgrade your recovery kit with the Rugged Ridge Soft Rope Shackle, a modern alternative to heavy steel D-rings. Constructed from high-strength HMPE (High-Modulus Polyethylene) rope, this shackle provides a massive 30,000 lb breaking strength while remaining lightweight and buoyant. Unlike nylon, HMPE naturally repels water and resists abrasions, maintaining its integrity in wet or muddy off-road environments.

• Superior Material: HMPE construction is stronger than steel, floatable, and features low elasticity for safer recoveries.
• Easy Handling: The pliable rope design allows for quick attachment to tow hooks and recovery points in tight spaces, even while wearing gloves.
• Safe and Durable: Won't rust or corrode like steel hardware; remains securely closed under load but opens easily once tension is released.
• Working Load Limit: Rated for a 7,500 lb working load with a 30,000 lb breaking strength.
• Part Number: 11235.50
• Warranty: Includes a Limited 5-Year Warranty.

Protect your bumper's finish and eliminate the constant rattling of recovery gear with the Rugged Ridge Red 7/8-Inch D-Ring Shackle Isolator Kit. These isolators are engineered to snap directly onto the outer perimeter of standard 7/8-inch shackles, preventing metal-to-metal contact between the shackle and the bumper mounting tabs.

Each kit features a three-piece design molded from durable, energy-absorbing polyurethane. The primary isolators shield the shackle body, while the included urethane washers mount between the shackle pin and the mounting tab to provide comprehensive isolation. This setup effectively silences the clanging typical of off-road rigs while shielding powder-coated or painted surfaces from impact damage and scratches.

• Fits 7/8-inch recovery shackles
• Molded energy-absorbing polyurethane construction for long-term durability
• Snap-on design allows for quick, tool-free installation
• Kit includes two (2) isolators and four (4) washers
• Manufacturer Part Number: 11235.41
• Backed by a 5-year limited warranty

Eliminate the constant metal-on-metal clanging of recovery shackles against your bumper with the Rugged Ridge D-Ring Isolator Kit. These isolators are engineered to provide a resilient buffer between the shackle and the mounting surface, protecting your bumper's powder coat or paint finish while significantly reducing trail and road noise from your off-road rig.

Constructed from durable, energy-absorbing polyurethane, the three-piece design snaps easily over the outer perimeter of standard 3/4-inch shackles. The kit also includes urethane washers to isolate the contact points between the shackle pin and the mounting tab, ensuring comprehensive protection and a silent, rattle-free setup.

• Specifically designed for 3/4-inch recovery shackles
• Molded from high-density, energy-absorbing polyurethane to withstand harsh off-road environments
• Snap-over design allows for simple installation without removing the shackle
• Includes two (2) isolators and four (4) urethane washers for a complete pair
• Manufacturer Part Number: 11235.30
• Backed by a 5-year limited warranty

This pair of Rugged Ridge 3/4-inch D-ring shackles provides the reliable attachment points necessary for safe and effective vehicle recovery. Designed with a secure screw-pin mechanism, these shackles allow for quick, temporary connections of recovery straps, snatch blocks, and pulleys during off-road winching or towing operations.

Each shackle is constructed from high-strength forged steel to withstand the rigors of trail use and is finished in a durable black powder coating for long-lasting corrosion resistance. Whether you are building a new recovery kit or upgrading your gear, these heavy-duty D-rings are essential hardware for any 4x4 or off-road vehicle.

• Working Load Limit (WLL): 9,500 lbs
• Pin Size: 3/4-inch screw-pin design
• Material: High-strength forged steel construction
• Finish: Corrosion-resistant black powder-coat
• Sold as a pair (Set of 2)
• Manufacturer Part Number: 11235.18
• Limited 5-Year Warranty

Equip your recovery kit for heavy-duty tasks with this pair of Rugged Ridge red D-shackles. Engineered to handle the weight of full-size trucks and Hummers, these shackles provide a reliable connection point for winch lines and recovery straps. Each shackle is constructed from high-strength galvanized steel for core durability and finished with a vibrant red powder coating to resist rust and corrosion in harsh off-road environments.

• Working Load Limit (WLL): 13,500 lbs
• Pin Size: 7/8-inch
• Construction: Galvanized steel for superior strength
• Finish: Durable red powder coat for corrosion resistance
• Quantity: Sold as a pair (Set of 2)
• Manufacturer Part Number: 11235.13

Equip your vehicle for serious recovery with this pair of Rugged Ridge 7/8-inch D-shackles. These shackles provide a high-strength attachment point for recovery straps, snatch blocks, and winch cables, ensuring you have a reliable connection when navigating difficult terrain. Each shackle is designed with a 1-inch diameter threaded pin for secure installation into compatible bumper tabs and recovery mounts.

Built from heavy-duty galvanized steel, these shackles are engineered to withstand the rigors of off-road use. The black finish provides an extra layer of protection against corrosion and oxidation, maintaining durability in wet or muddy conditions. With a rated Working Load Limit (WLL) of 13,500 lbs, these components offer the structural integrity required for heavy-duty towing and winching tasks.

• Working Load Limit (WLL): 13,500 lbs
• Material: Galvanized Steel
• Shackle Size: 7/8 inch
• Pin Diameter: 1 inch
• Finish: Black
• Quantity: Pair (2 Shackles)
• Manufacturer Part Number: 11235.06

Ensure your vehicle is recovery-ready with this pair of Rugged Ridge 3/4-inch D-shackles. Designed to provide a secure attachment point for recovery straps and winch lines, these heavy-duty shackles are essential hardware for safely extracting vehicles in off-road environments. Each shackle is forged from galvanized steel for maximum structural integrity and finished in black for lasting corrosion resistance.

• Pull capacity rated at 9,500 lbs
• 3/4-inch diameter pin for standard recovery mounts
• Forged galvanized steel construction
• Durable black finish
• Includes one pair (2 shackles)
• Manufacturer Part Number: 11235.04

The Road Armor iDentity Aluminum Shackle (RG-SH087CZ) provides a high-strength, lightweight recovery solution for off-road bumpers and recovery mounts. Precision-machined from premium-grade aluminum, this shackle offers a durable alternative to traditional heavy steel D-rings, reducing front-end weight and minimizing trail rattle without sacrificing structural integrity.

This single shackle features a raw aluminum finish, making it a perfect match for the modular aesthetics of the iDentity series or any custom build requiring a clean, industrial look. Its corrosion-resistant material ensures long-lasting performance in harsh outdoor environments, whether used for winch recoveries, towing, or as a dedicated anchor point.

• Machined from high-grade aluminum for optimal strength-to-weight ratio
• Raw aluminum finish provides a versatile, unfinished look
• Lightweight construction reduces vibration and noise during vehicle operation
• Compatible with standard recovery mounts and Road Armor iDentity bumpers
• Sold individually (Single)
• Manufacturer Part Number: RG-SH087CZ

Upgrade your vehicle's recovery points with the Road Armor iDentity Series Aluminum Shackles (RG-SH087CR). These shackles provide a lightweight, corrosion-resistant alternative to traditional steel D-rings, making them an ideal solution for off-road enthusiasts prioritizing both durability and weight savings. The vibrant red finish provides high visibility during recovery operations while adding a custom aesthetic to your bumper setup.

Machined from high-grade aluminum, these shackles are designed to resist rust and oxidation even after prolonged exposure to the elements. They integrate seamlessly with iDentity series bumpers and other standard shackle mounts, providing a reliable anchor point for winching or kinetic recovery straps.

• Brand: Road Armor
• Series: iDentity
• Material: High-strength Aluminum
• Finish: Red Powder Coat/Anodized
• Part Number: RG-SH087CR
• Application: Universal recovery anchor point for off-road bumpers

Enhance your vehicle's recovery points with the Road Armor iDentity Aluminum Shackles. Engineered for off-road durability, these shackles provide a lightweight yet high-strength alternative to traditional steel recovery gear. The aluminum construction offers superior corrosion resistance, ensuring your recovery hardware remains functional and aesthetically sharp even in harsh environments.

• Constructed from high-grade aluminum for weight savings and weather resistance
• Durable Textured Black powder coat finish protects against rock chips and abrasion
• Modular design compatible with the Road Armor iDentity series product line
• Manufacturer Part Number: RG-SH087CB

Fits 1987-1995 Jeep Wrangler YJ submodels including Base, Sahara, Sport, and SE. This Omix leaf spring shackle kit is an OE-style direct replacement designed to restore proper suspension geometry and articulation. Over time, factory shackles often succumb to corrosion or bushing fatigue, leading to sloppy handling and increased noise. This kit replaces worn-out components with durable, precision-engineered hardware to maintain the Jeep legend.

• Precision Fit: Replaces OE part number 52040415K for a reliable, bolt-on installation.
• Comprehensive Kit: Includes 2 shackle brackets, 4 bushings, 2 sleeves, 2 bolts, 2 nuts, and washers.
• Usage Note: One kit services a single leaf spring. To replace all shackles on a vehicle, 4 kits are required.
• Construction: OE-style materials and finishes ensure durability and corrosion resistance.
• MPN: 18271.22
• Warranty: Covered by a limited 5-year manufacturer warranty.

Fits 1941-1960 Jeep Willys MB and CJ-2, CJ-3, CJ-5, and CJ-6 models.

Keep your vintage Jeep suspension operating smoothly with this OE-style greaseable shackle kit from Omix. Designed as a direct replacement for worn or seized factory hardware, this kit features a greaseable pin to ensure long-term serviceability and quiet operation. This specific shackle uses left-hand threads and is designed for use on the front left (driver side) and right rear (passenger side) positions. Replacing worn shackles restores proper spring movement and prevents the binding often found in decades-old suspension components.

• Position: Front Left or Right Rear
• Thread Direction: Left Hand (LH)
• Construction: OE style steel with greaseable fitting
• Quantity: Sold individually (two kits required per vehicle)
• Manufacturer Part Number: 18270.12
• Replaces OE Number: 802061
• Warranty: Limited 5-Year Warranty

Fits 2004-2024 Nissan Titan models. These MaxTrac Suspension 1-inch rear lift shackles provide a reliable method for increasing rear-end clearance or leveling your truck's stance. Fabricated from heavy-duty steel and finished in a durable grey powder coat, these shackles are engineered to withstand the rigors of off-road use and harsh environmental conditions.

Unlike standard factory components, these shackles feature high-quality urethane bushings. These bushings are designed to allow for smoother suspension articulation with significantly less binding than traditional rubber, ensuring consistent performance throughout the suspension cycle.

• Provides 1 inch of rear lift
• Precision fabricated from heavy-duty steel
• Durable grey powder-coated finish for corrosion resistance
• Urethane bushings included for reduced binding and improved durability
• Simple bolt-on installation to factory mounting points
• Manufacturer Part Number: 715310
• Includes one pair of shackles

Fits 2004-2025 Ford F-150 and Nissan Titan.

MaxTrac Suspension 1-inch rear lift shackles are engineered to provide a subtle lift for your truck's rear end while maintaining original equipment (OE) ride quality. These shackles are an ideal solution for owners looking to level their vehicle or gain additional clearance without the stiffness often associated with add-a-leaf kits or replacement leaf packs.

Each shackle is constructed from heavy-duty fabricated steel for maximum durability and finished in a resilient grey powder coat to protect against corrosion and road debris. As a direct bolt-on upgrade, they are designed to fit into the factory mounting points, ensuring a straightforward installation process.

• Part Number: 713210
• Lift Height: 1 Inch
• Material: Fabricated Steel
• Finish: Grey Powder Coat
• Includes: One pair (2) of rear lift shackles
• Installation: Bolt-on to factory mounts
• Retains factory ride comfort

Fits select 2002-2025 Chevrolet Silverado 1500, GMC Sierra 1500, and Dodge Ram 1500 trucks. These MaxTrac 2-inch rear lift shackles provide an effective and durable way to raise the rear of your vehicle for improved stance and tire clearance.

Fabricated from heavy-duty steel and finished in a resilient grey powder coating, these shackles are designed to replace factory hardware and maintain suspension integrity. MaxTrac part number 712120 includes high-quality urethane bushings, which offer superior longevity over OEM rubber and help minimize binding during suspension cycling for a smoother ride.

• Lift Height: 2 inches
• Material: Fabricated steel
• Finish: Grey powder coat
• Bushings: Urethane for reduced binding
• Installation: Direct bolt-on replacement for factory shackles
• Manufacturer Part Number: 712120
• Quantity: Pair (two shackles)

Fits 2004-2024 Nissan Titan 2WD and 4WD models (LE, Platinum Reserve, PRO-4X, S, SE, SL, SV, XE).

Level the stance or drop the rear of your Nissan Titan with MaxTrac 2-inch lowering shackles. These heavy-duty shackles replace the factory units to provide a precise 2-inch drop, improving the vehicle's profile while maintaining ride quality. Built for long-term durability, these shackles feature a grey powder-coated finish to prevent rust and corrosion in harsh underbody environments.

Unlike standard static shackles, MaxTrac includes greasable bushings and integrated zerk fittings. This allows for easy maintenance and ensures the suspension remains quiet and pivot points stay lubricated, preventing the squeaking common with inferior polyurethane components. This kit comes complete with the necessary sleeves for a straightforward installation into factory mounting locations.

• Drop Height: 2 Inches
• Finish: Grey Powder Coat
• Serviceable Design: Includes Zerk fittings and greasable bushings
• Installation: Replaces OE rear shackles
• Part Number: 415320

Fits select 1999-2025 Ford F-150, F-250, and F-350, as well as 2011-2025 Chevrolet Silverado and GMC Sierra 2500 HD / 3500 HD trucks.

Correct your truck's stance and achieve a leveled look with MaxTrac 1-inch rear lowering shackles. These heavy-duty shackles are designed to replace the factory components, effectively dropping the rear of the vehicle to eliminate excessive wheel well gap. To ensure long-term durability and quiet operation, these shackles feature high-quality greaseable bushings and sleeves. The integrated zerk fittings allow for easy maintenance without disassembly, preventing the common squeaking associated with polyurethane or dry bushings.

Built for the rigors of heavy-duty use, these shackles are finished in MaxTrac's signature gunmetal grey powder coat to protect against rust and road debris. Whether you are seeking improved aesthetics or easier access to the truck bed, these 413710 shackles provide a straightforward bolt-on solution with no welding or major fabrication required.

• Lowering Height: 1.0 Inch (Rear)
• Finish: Signature Gunmetal Grey Powder Coat
• Hardware: Greaseable bushings, sleeves, and zerk fittings included
• Installation: Direct bolt-on replacement for factory shackles
• Manufacturer Part Number: 413710

Fits 2004-2014 Ford F-150 and F-150 Heritage models including XL, XLT, Lariat, FX2, FX4, STX, King Ranch, Platinum, and SVT Raptor.

Level out your truck's stance and improve its profile with these MaxTrac 2-inch rear lowering shackles. Designed as a direct replacement for the factory hardware, these shackles provide a reliable way to drop the rear of your F-150 without sacrificing ride quality. The assembly features high-quality urethane bushings to minimize binding and ensure quiet, smooth suspension articulation under varying load conditions.

Built for long-term durability, these shackles are finished in a grey powdercoat to resist corrosion and road debris. They come fully equipped with sleeves and integrated zerk fittings, allowing for easy maintenance and ensuring the bushings remain properly lubricated for the life of the part.

• Part Number: 413130
• Drop Height: 2 inches
• Material: Heavy-duty steel with grey powdercoat finish
• Bushings: Greasable urethane for reduced binding
• Included: Shackles, sleeves, bushings, and zerk fittings

Fits select 1999-2025 Ford F-150, F-250, and F-350, and 2011-2025 Chevrolet Silverado and GMC Sierra 2500 HD/3500 HD trucks.

MaxTrac lowering shackles are an effective and straightforward way to drop the rear of your truck by 2 inches, helping to level out the stance or achieve a lower overall profile. These shackles are engineered to replace the factory units and are constructed with a durable grey powder-coated finish to resist corrosion and road debris. Unlike standard rubber-bushed shackles, these feature high-quality urethane bushings that provide a firmer feel and significantly less binding during suspension travel.

To ensure long-term performance and quiet operation, the kit includes greasable sleeves and integrated Zerk fittings, allowing for easy maintenance without disassembly. This kit provides a complete solution for those looking to improve their truck's aesthetics while maintaining ride quality.

• Provides a 2-inch rear drop height
• Durable grey powder-coated finish
• Includes greasable urethane bushings for reduced binding and noise
• Integrated Zerk fittings for easy maintenance
• Includes all necessary sleeves and hardware
• Manufacturer Part Number: 411420

Fits select 1988-2019 Chevrolet Silverado/Sierra 1500, C1500/C2500, Suburban, Tahoe/Yukon, and 1997-2009 Ford F-150 and Ranger. These MaxTrac lowering shackles offer a straightforward way to drop the rear of your truck by 2 inches, helping to level the stance or reduce the wheel gap for a more aggressive look.

Constructed for durability and ease of maintenance, these shackles (MPN: 410520) are finished in a grey powder coating to resist corrosion and road debris. Unlike standard rubber-bushed shackles, these units include greasable polyurethane bushings and sleeves. The integrated zerk fittings allow for regular lubrication, preventing the squeaks often associated with aftermarket suspension components. On specific makes and models, these versatile components may also be utilized as lift shackles.

• Provides a 2-inch rear drop
• Includes greasable bushings and sleeves for quiet operation
• Integrated zerk fittings for easy maintenance
• Durable grey powder-coated finish to eliminate rust
• Direct replacement for factory shackles
• Manufacturer Part Number: 410520

Fits 2010-2025 Ford F-150 models including Raptor, Tremor, King Ranch, Lariat, Platinum, XL, and XLT.

Fine-tune the rear ride height of your Ford F-150 with the ICON Vehicle Dynamics Billet Aluminum Lowering Shackle Kit. These shackles provide a 1-inch drop to the rear, allowing you to achieve a level stance with less front lift or to assist in rear ride height tuning when using aftermarket leaf springs. Unlike thin factory steel units, these shackles are CNC-machined from 6061 aviation-grade aluminum for increased strength and durability during aggressive off-road use.

Each shackle features pre-installed, replaceable OE Ford bonded bushings. These high-quality bushings require no periodic greasing and provide quiet, maintenance-free operation through the full range of suspension travel. The gusseted design ensures proper clearance for factory leaf springs, ICON Multi-Rate Leaf Springs, and most other aftermarket spring packs.

• CNC-machined from 6061 aircraft-grade aluminum
• Lowers rear ride height by 1 inch
• Includes maintenance-free, replaceable OE Ford bonded bushings
• Satin gray anodized finish for superior corrosion resistance
• Fits stock and most aftermarket leaf spring packs
• Manufacturer Part Number: 91001

Fits 1966-1974 Dodge Challenger, Charger, and Coronet, and Plymouth Barracuda, Cuda, Belvedere, GTX, Road Runner, and Satellite.

The Hotchkis Sport Suspension 17367 Heavy Duty Shackle Kit is an essential upgrade for Mopar B-Body and E-Body leaf spring configurations. Designed to replace flexible factory hardware, these shackles provide the rigidity needed for consistent handling and performance. This kit is specifically designed for leaf springs with 1-inch bushings; please verify your spring eye diameter prior to installation.

While many aftermarket kits use a thin sleeve and a small-diameter bolt that can compromise structural integrity, Hotchkis uses custom-machined shoulder bolts. These bolts act as the bushing sleeve themselves, locking the opposite shackle plate into position for maximum strength. The .250-inch thick steel plates are finished in a durable gloss black powder coat to withstand the elements.

• Direct-fit for Mopar B and E-Body vehicles with 1 in. bushings
• Heavy-duty .250 in. thick steel shackle plates
• Precision-machined shoulder bolts for increased assembly rigidity
• Includes 1 in. polyurethane leaf spring bushings and grease
• High-strength Grade 8 hardware and nylock nuts
• Protective gloss black powder coat finish
• Manufacturer Part Number: 17367

Fits select 1976-1986 Jeep CJ-5, CJ-7, and CJ-8 Scrambler models.

Improve your Jeep's leaf spring articulation and ride quality with these Fishbone Offroad Heavy Duty Rear Greaseable Shackles. These shackles are designed to replace flimsy factory components that are prone to binding and accelerated wear. By utilizing a greaseable bolt design, these shackles allow for consistent lubrication of the bushings, which reduces friction and eliminates the suspension squeaks common in older CJ models.

Constructed from laser-cut 3/8-inch steel, these shackles provide the rigidity needed for off-road use while the zinc-plated finish ensures long-term resistance to corrosion and trail debris. Each set includes durable polyurethane bushings that offer better deflection characteristics than standard rubber, maintaining better alignment under load.

• Fits rear suspension only
• 4-inch center-to-center bolt spacing
• Manufactured from heavy-duty 3/8-inch steel
• Corrosion-resistant zinc plating
• Includes high-performance polyurethane bushings
• Greaseable hardware for easy maintenance
• Sold as a set of two (2) shackles
• Manufacturer Part Number: FB27226

Designed for the 1946-1975 Jeep CJ-5, these Fishbone Offroad Heavy Duty Greaseable Shackles provide a durable upgrade for your leaf spring suspension. These shackles are engineered to replace thin factory components with robust 3/8-inch thick steel, finished in zinc plating for superior corrosion resistance during off-road use.

This kit includes two shackles equipped with high-density polyurethane bushings, which offer more stability and a longer service life than traditional rubber. The greaseable design ensures smooth, quiet operation of the suspension cycle and simplifies long-term maintenance. These shackles provide approximately 3/4-inch of lift and can be utilized in either the front or rear positions.

• Fits 1946-1975 Jeep CJ-5 (Front or Rear)
• Construction: 3/8" Thick Zinc Plated Steel
• Bolt Center-to-Center: 4.5"
• Lift Height: 0.75"
• Bushing Material: Greaseable Polyurethane
• Quantity: Set of 2
• Manufacturer Part Number: FB27222

Fits 1995-2004 Toyota Tacoma Base and Pre Runner models.

The Fabtech FTS2096 Rear Shackle Kit is an efficient solution for lifting the rear suspension on 5-lug Toyota Tacoma trucks. These heavy-duty shackles provide approximately 2 inches of lift, allowing for increased ground clearance and larger tire fitment while maintaining the suspension performance demanded by off-roaders.

• Constructed from stout 0.375-inch (3/8") thick steel plate for maximum durability
• Provides approximately 2 inches of rear lift height
• Engineered for a straightforward bolt-on installation
• Designed specifically for mini/mid-size 2WD truck applications
• Manufacturer Part Number: FTS2096

Vehicle Fitment:

Fits 2005-2023 Ford F-250 and F-350 Super Duty trucks.

The Carli Suspension Carrier Bearing Drop Bracket is engineered to correct driveline geometry on Super Duty models equipped with two-piece driveshafts. Lifting the rear suspension increases U-joint angles, which frequently results in take-off shudder and unwanted driveline vibrations. This drop bracket provides a robust solution to restore proper alignment and ensure a smooth driving experience.

• Customizable Height: Utilizes a stackable shim design to accommodate rear lift heights from 1 inch up to 4 inches.
• Driveline Correction: Specifically designed to eliminate acceleration shudders and vibrations caused by altered suspension height.
• Precision Fitment: Engineered to integrate with the factory carrier bearing mount for a secure installation.
• Manufacturer Part Number: CS-CARRIERDROP-F