Fits select 1997-2004 Chevrolet Corvette, Camaro, and Pontiac Firebird, GTO.

Wiseco Professional Series forged pistons are engineered for high-performance LS builds where rotating assembly strength is critical. Forged from 2618 aluminum alloy, these pistons provide the increased tensile strength required for heavy-duty racing and forced induction applications. The skirts feature Wiseco’s proprietary ArmorGlide coating to reduce friction, minimize scuffing, and ensure quieter operation. Every set includes precision-machined ring grooves and forced pin oiling to ensure constant lubrication and superior ring seal under extreme cylinder pressures.

• Forged from high-strength 2618 aluminum for severe-duty applications
• ArmorGlide skirt coating reduces friction and improves wear resistance
• Precision-machined crown features with forced pin oiling
• Includes high-quality piston rings for optimal seal
• Bore Size: 4.005in
• Compression Height: 1.304in
• Piston Volume: -3.20cc
• Manufacturer Part Number: K398X05

Engineered for the high-performance demands of the Mercedes-Benz AMG 4.0L V8, this CP Pistons forged set provides the structural integrity and thermal management required for modified M177 and M178 engines. These pistons are precision-machined to handle increased cylinder pressures and elevated boost levels that often exceed the limits of factory cast components.

• Forged from high-strength aluminum alloy for superior durability under heavy load
• Engineered with optimized skirt profiles to minimize friction and piston slap
• Advanced ring groove geometry for improved oil control and combustion sealing
• Designed specifically for the Mercedes-Benz M177 and M178 engine platforms

Technical Specifications:

• Manufacturer: CP Pistons
• Engine Compatibility: Mercedes M177 / M178
• Bore Diameter: 83mm
• Compression Ratio: 10.5:1
• Quantity: Set of 8 pistons with wrist pins and locks

Fits Chrysler 6.4L Hemi 392ci engines.

This Mahle piston set is engineered for high-performance builds, delivering the precision and durability required for the 6.4L Hemi platform. Machined from high-strength alloys to withstand elevated thermal and mechanical stresses, these pistons maintain tight tolerances for improved ring seal and power consistency. Whether you are refreshing a high-mileage street engine or building a dedicated performance Hemi, this set provides the exact geometry needed for a 3.724-inch stroke and 6.20-inch rod combination.

• Bore: 4.090 in
• Stroke: 3.724 in
• Rod Length: 6.20 in
• Compression Ratio: 11.0:1
• Displacement: 392ci (6.4L)
• Quantity: Set of 8 pistons

This Mahle Piston Set is engineered for the Chrysler Hemi 392ci (6.4L) engine platform, providing a precision-fit solution for high-performance builds. Designed to maintain tight tolerances and reliable thermal characteristics, these pistons are ideal for enthusiasts looking to achieve a specific 11:1 compression ratio in naturally aspirated applications.

This complete set of eight pistons is configured for use with a 3.724-inch stroke and 6.200-inch connecting rods. Mahle utilizes advanced manufacturing techniques to ensure consistent weight and geometry across the set, which is critical for engine balance and longevity in high-RPM Hemi environments.

• Engine Compatibility: Chrysler Hemi 392ci (6.4L)
• Bore Diameter: 4.100 in
• Stroke: 3.724 in
• Connecting Rod Length: 6.200 in
• Compression Ratio: 11:1
• Quantity: Complete set of 8 pistons

Build your high-performance engine with the precision and durability of Mahle Motorsports MS series pistons. Designed for 308ci applications, these forged pistons are engineered to withstand the rigors of high-RPM use and increased cylinder pressures. This set provides a reliable foundation for racers and performance enthusiasts seeking optimized combustion efficiency and superior thermal management.

• Bore: 93.015mm
• Compression Height: 1.167"
• Stroke: 3.650"
• Rod Length: 5.933"
• Wrist Pin Diameter: 0.866"
• Piston Volume: -1.5cc
• Compression Ratio: 10.4:1
• Quantity: Set of 8

Each piston in this set is manufactured to exacting tolerances, ensuring consistent weight and balance across all cylinders. The MS series leverages Mahle's advanced forging techniques and specialized coatings to reduce friction and improve wear resistance in demanding racing or high-output street environments.

Engineered for high-performance Ford Gen 3 Coyote builds, this Mahle Motorsport (MS) Piston Set is designed for 308ci displacement configurations. These pistons provide the structural integrity required for increased mechanical loads while maintaining the precise tolerances necessary for high-RPM stability.

• Engine Application: Ford Gen 3 Coyote (5.0L)
• Bore: 3.662 in
• Stroke: 3.65 in
• Rod Length: 5.933 in
• Wrist Pin Diameter: 0.866 in
• Piston Crown Volume: 8.4cc
• Compression Ratio: 12:1
• Total Displacement: 308ci

Each set is machined with Mahle's advanced metallurgical techniques to ensure optimal thermal expansion control and ring groove stability. This kit includes the necessary components to replace factory pistons when moving to a 3.662-inch bore and 3.65-inch stroke setup.

Engineered for high-performance GM LSX builds, this Mahle Motorsport (MS) piston set is designed for 447 cubic inch displacement applications. These pistons are built to withstand the rigorous demands of high-output racing environments, providing the precise tolerances and thermal stability required for consistent power delivery.

This set is optimized for a 4.125-inch stroke and 6.125-inch connecting rods. With a 4.155-inch bore and a 1.050-inch compression height, these pistons feature a -5.8cc volume to achieve an 11.8:1 compression ratio. Each piston is machined to accept a 0.927-inch wrist pin, ensuring a secure and durable rotating assembly interface.

• Manufacturer: Mahle Motorsport
• Series: MS (Motorsport)
• Engine Application: GM LSX (447cid)
• Bore Diameter: 4.155"
• Stroke: 4.125"
• Rod Length: 6.125"
• Compression Height: 1.050"
• Wrist Pin Diameter: 0.927"
• Dome/Dish Volume: -5.8cc
• Compression Ratio: 11.8:1
• Quantity: Set of 8 pistons with pins

This Mahle Motorsport (MS) Piston Set is engineered for high-performance GM LS7 applications, specifically optimized for 430cid stroker builds. Designed to meet the rigorous demands of competitive racing and high-output street use, these pistons provide the necessary thermal stability and structural integrity required for high-RPM operation.

This set is configured for a 4.000-inch stroke and 6.067-inch connecting rods, utilizing a 4.135-inch bore diameter. With a -2.5cc effective volume, these pistons are designed to achieve an 11.8:1 compression ratio, providing an ideal balance of cylinder pressure and fuel compatibility for performance LS builds. Each piston is precision-machined to accommodate a 0.927-inch wrist pin for a secure, low-friction connection.

• Engine Type: GM LS7 (430cid)
• Bore Diameter: 4.135 in
• Stroke: 4.000 in
• Rod Length: 6.067 in
• Wrist Pin Diameter: 0.927 in
• Piston Volume: -2.5 cc
• Compression Ratio: 11.8:1

Fits 2016 Ford models equipped with the 5.0L (314ci) engine.

Engineered for high-performance builds, this Mahle MS series piston set delivers the strength and precision required for high-stress applications. Designed specifically for the 2016 Ford 5.0L, these pistons feature a 12.3:1 compression ratio to maximize thermal efficiency and power output. Each piston is machined to exacting tolerances, ensuring a perfect fit with 5.933-inch rods and 0.866-inch wrist pins. This set is an essential upgrade for engine builders seeking reliable performance under increased cylinder pressures and high-RPM conditions.

• Bore: 3.700 in
• Stroke: 3.650 in
• Rod Length: 5.933 in
• Wrist Pin Diameter: 0.866 in
• Dome/Dish Volume: 7.3cc
• Compression Ratio: 12.3:1
• Displacement: 314ci (5.0L)

Engineered for high-performance GM LT1 416ci stroker applications, this Mahle Motorsport (MS) piston set provides the precision and durability required for high-compression Gen V Small Block builds. These pistons are designed to handle the increased mechanical and thermal loads of performance driving while maintaining tight tolerances for optimal ring seal and power output.

This set is configured for a 4.070-inch bore and a 4.000-inch stroke, utilizing a 6.125-inch connecting rod and a .927-inch wrist pin. With a -6cc volume, they are optimized to reach a 12.1:1 compression ratio, making them ideal for aggressive naturally aspirated or high-response builds requiring a specific dome/relief profile.

• Bore: 4.070 in
• Stroke: 4.000 in
• Rod Length: 6.125 in
• Wrist Pin Diameter: 0.927 in
• Piston Volume: -6cc
• Compression Ratio: 12.1:1
• Quantity: Set of 8 pistons with pins
• Manufacturer Part Number: 930165370

Fits select 1997-2004 Chevrolet Camaro, Corvette, and Pontiac Firebird, GTO.

Wiseco Professional Series forged racing pistons are engineered for high-output environments where standard components reach their limit. Machined from 2618 aluminum alloy, these pistons provide the superior tensile strength and fatigue resistance required for severe duty racing and high-boost applications. Each piston features a fully machined crown and specialized ring grooves to ensure a precision seal under extreme combustion pressures.

• ArmorGlide Skirt Coating: A proprietary dry-film lubricant that reduces friction, minimizes piston rock for quieter operation, and provides high-level seizure resistance.
• Advanced Oil Control: Includes forced pin oiling to ensure the wrist pins remain lubricated under high-load conditions, preventing galling and premature wear.
• Engineered Durability: Features an anti-detonation groove to protect the top ring land and precision-machined ring grooves for improved seal integrity.
• Complete Set: Provided with premium rings and wrist pins specifically matched for the Professional Series line.

Specifications:

• Manufacturer Part Number: K398X7
• Bore Size: 4.070in
• Compression Height: 1.304in
• Volume: -3.20cc
• Material: 2618 Forged Aluminum

Fits Dodge 6.2L Hellcat engines.

Engineered to withstand the extreme cylinder pressures of supercharged applications, these CP Pistons forged inverted dome pistons are a premier choice for reinforcing or rebuilding your 6.2L Hellcat engine. These pistons are machined to exacting tolerances to ensure a superior ring seal and long-term durability under high thermal loads.

• Bore Diameter: 4.10 in
• Compression Ratio: 9.5:1
• Piston Style: Inverted Dome
• Engine Application: Dodge 6.2L Hellcat
• Quantity: Set of 8
• Manufacturer Part Number: BH62-950-010

Designed specifically for the Gen 3 Hemi 6.2L Hellcat engine, this JE Pistons forged piston set (MPN 367215) is engineered to withstand the extreme pressures of high-performance racing and forced induction applications. Every piston is machined in the USA from 2618 aluminum alloy, offering the high tensile strength required for durability at the limit.

These pistons utilize JE's proprietary Forged Side Relief (FSR) design, which reduces friction and power loss by narrowing the skirt width. This design also allows for a shorter, lighter wrist pin, further reducing reciprocating mass for improved engine response. For consistent performance, the integrated accumulator grooves help manage combustion gases to prevent ring flutter and maintain a superior ring seal.

• Engine Compatibility: Gen 3 Hemi 6.2L Hellcat
• Bore Diameter: 4.100in
• Wrist Pin Diameter: 0.927in
• Compression Distance: 1.280in
• Piston Head Style: Inverted Dome/Dish
• Material: 2618 Forged Aluminum
• Configuration: Set of 8 pistons
• Manufacturer Part Number: 367215

Fits Ford 5.0L Modular Coyote V8 engines (5.0L).

The Manley Platinum Series piston set is engineered for high-performance Ford 5.0L Coyote builds that demand superior strength and precise tolerances. Forged from domestic 2618 aluminum alloy, these pistons are designed to withstand the thermal and mechanical stresses of professional tuning. Each piston features Manley's unique manufacturing process where skirt turning and ring groove machining are performed in a single operation, ensuring maximum squareness for optimal ring seal and power retention.

• Material: High-strength 2618 aluminum alloy forgings
• Bore Size: 3.662 in
• Compression Height (CH): 1.165 in
• Dish Volume: 6.75 cc
• Wrist Pins: Premium Chrome Moly pins included
• Profile: Engineered cam and barrel skirt profiles to reduce cylinder wall friction
• Manufacturing: Single-operation machining for ultimate ring groove-to-skirt squareness
• MPN: 595900C-8

By adhering to strict standards for ring land and groove dimensions, Manley provides engine builders with a component that improves compression sealing and increases longevity in demanding racing or street applications.

Engineered for Chevrolet LS builds, the Wiseco Pro Tru Street series provides a high-strength, forged solution for performance street and track applications. Forged from 4032 aluminum alloy, these pistons offer excellent thermal stability and allow for tighter piston-to-wall clearances, making them ideal for high-mileage durability and quieter operation.

This comprehensive kit includes everything needed for the rotating assembly upgrade, featuring precision-machined oil drain backs and AS-forged dome features. Each piston is treated with Wiseco's ArmorGlide skirt coating to minimize friction and provide superior seizure resistance during high-load operation. The set comes complete with chromium alloy steel piston pins and Spirolox for a secure, reliable installation.

• Manufacturer Part Number: PTS523AS
• Bore Size: 4.000in
• Compression Height (CH): 1.335in
• Dome/Dish Volume: 4.00cc
• Material: 4032 Forged Aluminum Alloy
• Coating: ArmorGlide Skirt Coating
• Included Components: Piston rings, chromium alloy steel pins, and Spirolox clips

The Wiseco Professional Series forged racing pistons (MPN K398X1) are engineered for high-performance Chevy LS builds where durability is critical. Forged from high-strength 2618 aluminum in the USA, these pistons are designed to withstand the thermal and mechanical stresses of heavy to severe duty racing applications.

• Material: 2618 Forged Aluminum for superior tensile strength
• Bore Size: 4.010 inch
• Piston Volume: -3.2cc Flat Top (FT)
• ArmorGlide Skirt Coating: Reduces friction, minimizes wear, and provides quieter operation
• Precision ring grooves and anti-detonation groove for optimized ring seal
• Fully machined crown and forced pin oiling for improved reliability
• Includes premium piston rings for a complete installation

This CP-Carrillo Bullet Race Series piston set is engineered specifically for the Dodge 6.2L Hellcat engine, providing a high-strength forged solution for high-horsepower builds. Designed to handle the extreme thermal and mechanical loads of forced induction, these pistons offer the durability required for performance HEMI applications.

Fits Dodge 6.2L Hellcat engines (Dodge SB V8).

• Brand: CP-Carrillo
• Series: Bullet Race Series
• Bore: 4.090 in
• Stroke: 3.580 in
• Rod Length: 6.200 in
• Quantity: Set of 8
• Manufacturer Part Number: BH62-950-STD

Each piston in the Bullet Series is machined to precise tolerances, ensuring consistent balance and performance across the entire engine. This kit is a critical upgrade for engine builders looking to enhance the structural integrity of their Dodge SB rotating assembly under high-boost or racing conditions.

Engineered for high-performance Chevrolet LT1 engines, these Wiseco RED (Race Engineered Design) Series forged pistons provide the strength and precision required for competitive drag racing and circle track applications. Each piston is forged and machined in the USA from 2618 aluminum alloy to handle the increased tensile stress of performance builds and power adders.

• Precision Engineered: Features a -.4cc DI dome design and 1.3260" compression height for optimized combustion and cylinder pressure management.
• Enhanced Lubrication: Horizontal slot oiling in the pin bores ensures consistent wrist pin and small-end lubrication for extended service life.
• Reduced Friction: Proprietary ArmorGlide skirt coating minimizes operating friction and noise while protecting against cylinder wall wear.
• Ring Seal Integrity: Includes an integrated accumulator groove to help maintain ring seal under high-load conditions.
• Complete Kit: Sold as a set of 8 and includes premium piston rings for a simplified installation process.
• MPN: RED0073X65

Designed for Chevrolet LS engine builds, the Wiseco Pro Tru Street Series Piston Set provides a high-strength, forged solution for street performance and weekend track applications. Forged in Mentor, Ohio, from 4032 aluminum alloy, these pistons feature a low-expansion rate that allows for tighter piston-to-wall clearances, resulting in quieter operation and exceptional durability.

Each piston is finished with Wiseco’s proprietary ArmorGlide skirt coating to reduce friction, prevent scuffing, and ensure a seizure-resistant interface with the cylinder walls. The AS-Forged dome design incorporates precision crown features and integrated oil drain backs to optimize thermal management and lubrication under high loads.

• Material: High-silicon 4032 forged aluminum alloy
• Bore Size: 4.030in
• Compression Height: 1.335in
• Piston Volume: 4.00cc
• Skirt Coating: ArmorGlide permanent dry film lubricant
• Wrist Pins: High-quality chromium alloy steel
• Retainers: Spirolox clips included
• Rings: Complete ring set included
• MPN: PTS523A3

Fits select 2005-2010 Chrysler 300 C SRT8, Dodge Challenger SRT8, Dodge Charger SRT8, Dodge Magnum SRT8, and Jeep Grand Cherokee SRT8 (6.1L).

Built for the rigors of heavy-duty race builds, this Wiseco Professional Series shelf stock kit is engineered, forged, and machined in the USA. These pistons are constructed from high-tensile 2618 aluminum alloy to handle the increased cylinder pressures of high-performance Hemi engines. Each piston features ArmorGlide skirt coating to minimize friction, reduce noise, and provide superior resistance to seizure during extreme operating conditions.

This comprehensive kit includes premium piston rings and features forced pin oiling and precision-machined ring grooves to ensure maximum seal and durability. The +4cc dome design and anti-detonation grooves make this an essential upgrade for builders seeking a reliable, competition-ready rotating assembly.

• Manufacturer Part Number: K471X25
• Bore Size: 4.080in
• Dome Volume: +4cc
• Material: Forged 2618 Aluminum
• Finish: ArmorGlide Skirt Coating
• Features: Forced pin oiling and anti-detonation grooves
• Includes: Professional Series pistons and premium rings

Fits select 1997-2004 Chevrolet Camaro/Corvette and Pontiac Firebird/GTO. These Professional Series forged racing pistons from Wiseco are engineered for high-performance builds that demand maximum durability under heavy load. Machined from 2618 forged aluminum for superior tensile strength, these pistons are built to handle the stresses of severe-duty racing and high-boost applications.

Each piston features Wiseco’s ArmorGlide skirt coating to minimize friction, reduce noise, and provide exceptional seizure resistance. Precision-machined ring grooves and anti-detonation grooves ensure a superior seal and long-term reliability. This set comes complete with premium rings and features forced pin oiling to maintain lubrication at high RPMs.

• Manufacturer Part Number: K464X7
• Bore Size: 4.070in
• Compression Height (CH): 1.110in
• Piston Volume: -3.00cc
• Material: 2618 Forged Aluminum
• Skirt Coating: ArmorGlide
• Includes: Premium ring set and forced pin oiling features

Fits 1997-2004 Chevrolet Camaro, Corvette and Pontiac Firebird, GTO.

Wiseco Professional Series forged racing pistons are engineered for high-performance LS builds requiring extreme durability. Machined in the USA from high-strength 2618 aluminum, these pistons feature a no-compromise design suited for heavy-duty race applications. Each piston is treated with ArmorGlide skirt coating to reduce friction and prevent seizure, ensuring reliable operation under high-load conditions and severe duty cycles.

• Material: 2618 forged aluminum for superior tensile strength and durability
• ArmorGlide Skirt Coating: Reduces friction and noise while providing seizure resistance
• Bore Size: 4.030in
• Compression Height: 1.110in
• Piston Volume: -15.00cc
• Forced pin oiling for improved wrist pin lubrication and cooling
• Precision-machined crown and ring grooves with anti-detonation features
• Includes premium piston rings for optimal seal
• Manufacturer Part Number: K445X3

Fits 1997-2004 Chevrolet Camaro, Corvette and Pontiac Firebird, GTO.

Wiseco Professional Series forged racing pistons are engineered for high-output LS builds that demand maximum durability under heavy to severe duty cycles. Machined in the USA from 2618 aluminum alloy, these pistons offer superior tensile strength and thermal resistance compared to standard cast or hypereutectic alternatives. This shelf stock kit includes premium rings and is designed to eliminate the limitations of OE components in forced induction or high-compression racing environments.

• Forged from 2618 aluminum for enhanced strength and fatigue resistance
• ArmorGlide skirt coating reduces friction and prevents seizure for quieter operation
• Precision-machined crown features with -11cc reverse dome volume
• Forced pin oiling and anti-detonation grooves for improved ring seal and longevity
• Includes premium piston rings and high-quality wrist pins
• Bore: 4.070in | Compression Height: 1.300in
• Manufacturer Part Number: K444X7

Fits 1997-2004 Chevrolet Corvette, Camaro and Pontiac Firebird, GTO.

Wiseco Professional Series forged racing pistons are engineered for high-performance engine builds that demand maximum durability under severe duty conditions. Machined in the USA from high-tensile 2618 aluminum alloy, these pistons are designed to withstand increased cylinder pressures and heat. Each piston features ArmorGlide skirt coating to reduce friction, minimize wear, and ensure quieter operation. The set includes premium rings and is detailed with forced pin oiling and precision-machined ring grooves for superior sealing and longevity.

• Bore: 4.030in
• Compression Height (CH): 1.304in
• Volume: -3.20cc
• Material: 2618 Forged Aluminum
• Finish: ArmorGlide skirt coating for friction reduction and seizure resistance
• Precision-machined ring grooves and anti-detonation grooves
• Forced pin oiling for enhanced wrist pin lubrication
• Includes premium piston rings
• Manufacturer Part Number: K398X3

Fits select 1997-2014 Chevrolet Corvette, Camaro, SSR, Trailblazer SS, Pontiac Firebird, G8, GTO, and Cadillac CTS-V models. These Wiseco Professional Series forged racing pistons are engineered for the high-cylinder pressures of serious performance builds, whether in heavy or severe duty applications.

Forged and machined in the USA from 2618 aluminum alloy, these pistons provide the high tensile strength required for high-horsepower LS builds. Each kit includes premium rings and features ArmorGlide skirt coating to reduce friction, eliminate seizure risk, and ensure quieter operation. The design incorporates precision-machined ring grooves and forced pin oiling to maintain durability under extreme loads.

• Manufacturer Part Number: K395X125
• Bore Size: 4.125 inch
• Dome Volume: -8cc Flat Top
• Material: 2618 High-Strength Forged Aluminum
• Coating: ArmorGlide Skirt Coating for reduced friction and wear
• Features: Precision ring grooves, anti-detonation groove, and forced pin oiling
• Includes: Premium piston rings and wrist pins

Fits Chevrolet LT1 engines (6.2L).

Wiseco Professional Series forged racing pistons are engineered for high-output competition and heavy-duty builds. Machined in the USA from 2618 aluminum alloy for superior tensile strength, these pistons are designed to handle the extreme thermal and mechanical loads of performance racing. Each piston features ArmorGlide skirt coating to reduce friction and minimize wear while providing quieter operation. The fully machined crowns and forced pin oiling ensure reliable performance at high RPM, while precision-machined ring grooves and anti-detonation grooves optimize combustion seal.

• Forged from 2618 aluminum for maximum durability in severe duty applications
• ArmorGlide Skirt Coating for reduced friction and seizure resistance
• Precision ring grooves and anti-detonation grooves for superior ring seal
• Forced pin oiling for enhanced wrist pin lubrication
• Includes premium rings and high-quality hardware
• Bore: 4.125in | Compression Ratio: 11.7:1 | Compression Height: 1.115
• Manufacturer Part Number: K0235X6

Fits 2006-2013 Chevrolet Corvette Z06, 427, and Z06 Carbon models.

Wiseco Professional Series forged racing pistons are engineered for the serious engine builder and competitive racer. Machined from 2618 aluminum alloy for exceptional tensile strength, this piston kit is designed to handle the heavy to severe-duty cycles of high-performance LS7 builds. Each piston crown is fully machined for precise geometry, while the skirt features ArmorGlide coating to reduce friction, minimize wear, and ensure quieter operation.

• Forged from 2618 aluminum for superior strength in racing applications
• +2.5cc dome volume and 1.175-inch compression height
• ArmorGlide skirt coating for reduced friction and seizure resistance
• Precision-machined ring grooves and anti-detonation grooves for optimal seal
• Forced pin oiling ensures consistent wrist pin lubrication
• Includes premium piston rings and high-quality wrist pins
• Manufacturer Part Number: K0004X130

Fits Ford 5.0L Modular Coyote V8 engines (5.0L).

Manley Platinum Series pistons are engineered for high-performance builds, utilizing domestic 2618 aluminum alloy forgings for maximum strength under high-RPM or forced induction conditions. These pistons feature Manley's signature cam and barrel skirt profiles, specifically designed to optimize power while minimizing friction and cylinder wall wear.

Through a unique manufacturing process, Manley machines the skirt profiles and ring grooves in a single operation. This ensures perfect squareness between the ring groove and the skirt, which is critical for maintaining a superior ring seal and maximizing combustion pressure. The exacting standards applied to the ring lands and grooves further enhance seal integrity for consistent power delivery.

• Manufacturer Part Number: 598000C-8
• Series: Platinum Series
• Material: 2618 Forged Aluminum Alloy
• Bore: 3.630in
• Compression Height: 1.165in
• Piston Volume: 3.75 CC
• Includes premium Chrome Moly wrist pins as standard
• Precision-machined ring lands and grooves for enhanced sealing

Fits 2018-2024 Ford Coyote (5.0L) DOHC engines.

Manley Platinum Series Extreme Duty pistons are engineered for professional engine builders and tuners who demand superior durability in high-horsepower applications. Forged from domestic 2618 aluminum alloy, these pistons are built to withstand extreme cylinder pressures. Each piston in this set features a moly skirt coating to reduce friction and minimize cylinder wall wear, providing a significant advantage in forced induction or high-RPM naturally aspirated builds.

Manley utilizes a unique manufacturing process where skirt turning and ring groove machining are performed in a single operation. This ensures ultimate squareness between the ring groove and the skirt for a superior ring seal and consistent power. The optimized cam and barrel skirt profiles provide necessary stability while remaining gentle on the cylinder walls. This set comes standard with premium Chrome Moly wrist pins and exacting ring land tolerances.

• Material: 2618 Forged Aluminum Alloy
• Bore Size: 3.662in
• Piston Volume: +1cc Dish
• Compression Ratio: 11:1
• Wrist Pins: Premium Chrome Moly included
• Finish: Moly coated skirts
• Manufacturer Part Number: 595800CE-8

Fits 2018-2024 Ford Coyote DOHC engines (5.0L).

Manley Platinum Series pistons are engineered for high-output builds requiring superior structural integrity and precise tolerances. Forged from domestic 2618 aluminum alloy, these pistons utilize a unique manufacturing process where skirt turning and ring groove machining are performed in a single operation. This ensures ultimate squareness between the ring groove and the skirt for an optimized ring seal and increased power output.

The Platinum Series features application-specific cam and barrel skirt profiles that reduce friction and wear on cylinder walls while maintaining stability under high thermal loads. Each set includes premium Chrome Moly wrist pins as standard, designed to withstand the rigors of high-RPM naturally aspirated or forced induction applications.

• Manufacturer Part Number: 595800C-8
• Material: 2618 High-Strength Forged Aluminum Alloy
• Bore Size: 3.662in
• Piston Head Volume: +1cc Dish
• Compression Ratio: 11:1
• Wrist Pins: Included Premium Chrome Moly
• Coating: Moly skirt coatings for reduced friction
• Precision machined ring lands and grooves for enhanced sealing