Ensure the safety and integrity of your nitrous system with the Nitrous Express 3000 PSI Burst Disc. This critical pressure-relief component is engineered to rupture if internal bottle pressure exceeds the 3000 PSI threshold, protecting both the cylinder and the vehicle operator from over-pressurization.

Designed specifically as a direct replacement for use with Nitrous Express Lightning 500 series valves, this disc integrates seamlessly with your existing safety blow-off cap assembly. Maintaining a fresh burst disc is essential for any high-performance nitrous setup to ensure reliable pressure management and compliance with track safety regulations.

• Precise 3000 PSI rupture rating
• Engineered for Nitrous Express Lightning 500 valves
• Direct replacement for triggered or worn safety discs
• Vital safety component for pressure regulation
• Manufacturer Part Number: 11712L

Ensure your nitrous system meets track safety requirements with the Nitrous Express 11709 NHRA Safety Blow-Off fitting. Designed to comply with NHRA regulations that mandate venting nitrous gases outside the cabin, this fitting replaces the factory safety blow-off disk to allow for the direct attachment of a blow-down tube.

This 3000 PSI rated component is a critical safety upgrade for any racer running a nitrous bottle within the passenger compartment. It is engineered for a precise fit on Nitrous Express Lightning 45 bottle valves and NX chrome bottle valves equipped with female threads.

• Manufacturer Part Number: 11709
• Pressure Rating: 3000 PSI
• Compliance: Meets NHRA safety requirements for external venting
• Compatibility: Fits NX Lightning 45 and NX Chrome bottle valves with female threads
• Function: Replaces safety disk to allow blow-down tube integration
• Note: Safety blow-off disk is not included

Ensure your nitrous system meets track safety requirements and protects the cabin with the Nitrous Express 11708-90 90-Degree Blow Down Tube Plumbing Kit. This kit is designed to route nitrous oxide safely out of the vehicle interior if the safety blowout disk on the bottle valve is ruptured due to over-pressurization.

Constructed from lightweight aluminum, this 90-degree tube provides a direct discharge path to the exterior of the vehicle. The kit includes the specialized 8AN nut and sleeve required for a secure, high-pressure connection to the safety vent port on the bottle valve.

• Manufacturer Part Number: 11708-90
• Includes 8AN nut and sleeve for secure plumbing
• Lightweight aluminum tubing with 90-degree bend
• Designed to vent nitrous discharge through the vehicle floor or chassis
• Essential for compliance with NHRA and other sanctioning body safety regulations

The Nitrous Express 11708 Blow Down Tube Plumbing Kit is a vital safety component designed to route high-pressure nitrous oxide safely outside the vehicle cabin in the event of a safety blowout disk rupture. This kit is essential for meeting track safety regulations that require exterior venting for bottles mounted in the passenger compartment.

• Vents nitrous oxide safely outside the vehicle if the safety blowout disk is triggered
• Includes a 180-degree pre-bent aluminum tube for efficient downward discharge
• Equipped with 8AN nut and sleeve for a secure, leak-free connection
• High-quality aluminum construction for durability and weight savings
• Manufacturer Part Number: 11708

The Nitrous Express Lightning 500 Bottle Valve is a high-performance nitrous-specific valve designed to eliminate flow restrictions and maximize horsepower. CNC-machined from 6061-T6 billet aluminum, this valve offers a significant weight reduction over traditional brass valves without sacrificing structural integrity.

Built for extreme racing environments, the Lightning 500 is pressure tested to over 10,000 PSI to ensure maximum safety and reliability. As one of the highest-flowing valves available, it is designed to retrofit into any brand of nitrous system, providing an immediate upgrade in delivery capacity for your existing setup.

• Material: 6061-T6 Billet Aluminum
• Pressure Rating: Tested to over 10,000 PSI
• Compatibility: Retrofits to any brand nitrous system
• Fitment: Designed for standard 10lb nitrous bottles
• Part Number: 11700L

Engineered for the high-pressure demands of nitrous oxide and fuel systems, the Nitrous Express 4AN 20ft stainless steel braided hose provides professional-grade durability and chemical resistance. This hose features a high-grade Teflon (PTFE) inner lining that remains impervious to the corrosive effects of race fuels and nitrous, preventing the degradation commonly found in standard rubber-lined hoses.

• Construction: Braided stainless steel exterior protects against abrasion and expansion under high pressure.
• Lining: Teflon (PTFE) core ensures compatibility with various fluids and prevents fuel vapor permeation.
• Fittings: Includes pre-installed black anodized aluminum fittings for secure, leak-free connections.
• Specifications: -4AN size, 20-foot length, Nitrous Express part number 11240.

Whether you are plumbing a new nitrous system or replacing a worn main feed line, this Nitrous Express hose offers the reliability required for both street and track applications. The black finish provides a clean, stealthy aesthetic in the engine bay or along the chassis.

Reduce vehicle weight without sacrificing capacity with the Nitrous Express (NX) 10lb Composite Nitrous Bottle. Designed for competitive drag racing and high-performance builds where every pound matters, this composite cylinder weighs only 7 lbs empty. This results in a 7.5 lb weight savings over a traditional 10lb aluminum bottle, with a total weight of just 17 lbs when fully charged.

This bottle is equipped with the high-flow Lightning 500 Valve, engineered to provide maximum nitrous delivery and consistent pressure. The composite construction offers an exceptional strength-to-weight ratio while maintaining a standard 6.79-inch diameter, allowing it to fit most 10lb bottle brackets and mounting systems.

• Manufacturer Part Number: 11152
• Capacity: 10 lbs
• Valve Type: Lightning 500 High-Flow Valve
• Dimensions: 6.79" Diameter x 23.25" Height
• Weight (Full): 17 lbs (7.5 lb savings over standard bottles)
• Material: High-strength lightweight composite
• Includes Certificate of Origin

Note: This product is made to order; please allow approximately two weeks for delivery.

This Nitrous Express (NX) 15lb nitrous bottle is engineered for high-performance applications requiring consistent bottle pressure and high flow rates. The bottle is finished in a durable powder coating for long-term corrosion resistance and features the high-flow Lightning 500 valve, which eliminates flow restrictions to ensure your nitrous system receives the volume necessary for peak performance.

This unit includes a pre-installed 0-1500psi analog pressure gauge, allowing for immediate monitoring of bottle status to maintain optimal operating conditions. Whether you are adding a second bottle or replacing an existing unit, this 15lb cylinder provides the capacity needed for multiple runs without significant pressure drop.

• Manufacturer Part Number: 11151
• Capacity: 15lb
• Dimensions: 6.89-inch Diameter x 26.69-inch Height
• Valve Type: Lightning 500 High-Flow Valve
• Pressure Gauge: Integrated 0-1500psi Analog Gauge
• Finish: Industrial Powder Coat
• Included: Certificate of Origin and Manufacturer Warranty

This 15lb nitrous bottle from Nitrous Express is designed for racers requiring consistent pressure and high flow rates. This bottle comes equipped with the Lightning 500 valve, which features a large internal orifice and a direct flow path to minimize pressure drop and ensure your solenoids receive a steady supply of liquid N2O. The exterior is finished in a durable black powdercoat to resist scratches and environmental wear during transport and track use.

• Bottle Capacity: 15 lbs
• Valve Type: Lightning 500 High-Flow Valve
• Bottle Diameter: 6.89 inches
• Bottle Height: 26.69 inches
• Fitting Size: -6 AN Nipple
• Finish: Black Powdercoated
• Manufacturer Part Number: 11150B-6

The Nitrous Express 11150-6 is a 15lb nitrous bottle engineered for consistent flow and durability in high-performance racing applications. Finished in a rugged powdercoat, this bottle is designed to withstand the rigors of frequent refills and track use while maintaining a professional appearance.

This unit comes equipped with the NX Lightning 500 valve, a high-flow component designed to eliminate restrictions and ensure maximum nitrous delivery to your solenoid. The valve features a integrated -6 AN nipple outlet for secure connection to your feed line. Measuring 6.89 inches in diameter and 26.69 inches in height, this 15lb capacity bottle offers an ideal balance of weight and volume for serious racers.

• Manufacturer Part Number: 11150-6
• Capacity: 15lb
• Valve Type: Lightning 500 High-Flow Valve
• Outlet Size: -6 AN Nipple
• Dimensions: 6.89in Diameter x 26.69in Height
• Finish: Durable Powdercoat

This Nitrous Express 15lb nitrous bottle (MPN 11150) is engineered for high-demand performance applications, offering a significant capacity for extended use. It comes equipped with the Lightning 500 high-flow bottle valve, designed to minimize restrictions and ensure consistent nitrous delivery to your solenoid. The bottle is finished in a durable, attractive powdercoat that provides long-lasting protection against scratches and environmental wear in high-performance environments.

• Capacity: 15lb
• Valve: Lightning 500 High-Flow Valve
• Diameter: 6.89 inches
• Height: 26.69 inches
• Finish: Powdercoated for durability
• Manufacturer Part Number: 11150
• Includes: High-flow bottle valve, Warranty information, and Certificate of Origin

Secure your nitrous system with the Nitrous Express Billet Aluminum Stand-Up Bottle Bracket. Specifically engineered to hold a standard 10lb nitrous bottle, this bracket features a robust bar-mount design, allowing for a secure installation directly to a roll cage or chassis tube. Precision-machined from high-grade billet aluminum, this bracket provides the structural integrity and vibration resistance required for high-performance track and street applications.

• CNC-machined billet aluminum construction for durability and weight savings
• Designed to fit standard 10lb nitrous bottles
• Stand-up, bar-mount configuration ideal for roll bar or roll cage integration
• Ensures proper bottle orientation and secure mounting during high-G maneuvers
• Manufacturer Part Number: 11108SB-10

Maintain consistent nitrous bottle pressure and ensure peak performance with the Nitrous Express 12V Bracket Mounted Bottle Heater (MPN: 11108H). Maintaining proper bottle temperature is critical for ensuring optimal nitrous flow and preventing the pressure drops that lead to inconsistent power delivery or lean conditions during a run.

This heater features a bracket-mounted design, providing a more secure and professional installation than standard strap-on heaters. It is engineered to integrate with your vehicle's 12V DC electrical system, providing the heat necessary to keep your bottle at the manufacturer-recommended pressure range.

• Maintains optimal nitrous bottle pressure for consistent performance
• Secure bracket-mounted heating element for stable installation
• Designed for standard 12V DC automotive electrical systems
• Durable construction built to withstand racing environments
• Manufacturer Part Number: 11108H

Secure your nitrous system with the Nitrous Express Billet Dual Nitrous Bottle Bracket (MPN: 11108D). This heavy-duty mounting solution is engineered to hold two 10lb or 15lb N2O bottles firmly in place, preventing movement during high-G acceleration or aggressive cornering.

Machined from high-quality billet aluminum, this bracket provides a professional, show-ready appearance while offering the structural integrity required for track use. The system comes complete with integrated floor mounts, ensuring a straightforward and stable installation onto your vehicle's chassis or trunk floor.

• Holds two 10lb or 15lb nitrous bottles simultaneously
• Precision-machined billet aluminum construction for maximum durability
• Includes floor mounting hardware for a secure installation
• Maintains consistent bottle orientation for optimal siphon tube performance
• Manufacturer Part Number: 11108D

Securely mount your nitrous system for competition with the Nitrous Express 11108B billet bottle bracket. Engineered for maximum stability, this bracket is designed to accommodate standard 10lb and 15lb N2O bottles, ensuring they remain fixed in position even under high G-loads and vibration.

The assembly is CNC-machined from high-grade billet aluminum, providing a lightweight yet incredibly strong alternative to stamped steel brackets. This specific kit includes integrated 1-5/8 inch bar mounts, allowing you to bolt the bracket directly to your roll cage or chassis tubing for a clean, professional installation that meets rigorous track safety standards.

• Fits standard 10lb and 15lb nitrous bottles
• CNC-machined from high-strength billet aluminum
• Includes 1-5/8 inch roll bar mounting hardware
• Rigid design prevents bottle movement and vibration
• Manufacturer Part Number: 11108B

Secure your nitrous system with the Nitrous Express Billet Bottle Bracket (11108). Engineered for maximum stability and ease of use, this mounting solution is designed to hold standard 10lb and 15lb N2O bottles firmly in place during high-performance driving. The precision CNC-machined billet aluminum construction offers superior strength and a professional finish compared to standard stamped-steel brackets.

This bracket kit includes dedicated floor mounts for a secure, permanent installation. A key advantage for racers is the design that facilitates easy bottle replacement without the need for tools, allowing for rapid swaps between heats or at the track.

• Fits standard 10lb and 15lb nitrous bottles
• CNC-machined billet aluminum construction for durability
• Includes floor mounting hardware for stable installation
• Tool-free bottle replacement design for quick swaps
• Manufacturer Part Number: 11108

The Nitrous Express 11107 Next Generation automatic remote bottle opener allows you to open and close your nitrous bottle from the driver's seat with the flip of a switch. This essential upgrade ensures you are always ready for a pass without needing to manually access the trunk or cargo area.

Designed specifically to interface with NX Lightning Series valves, this unit is lighter and features a sleeker, more compact profile than traditional openers. Its streamlined design simplifies installation while maintaining the reliability required for high-performance racing environments.

• Manufacturer Part Number: 11107
• Compatibility: Optimized for NX Lightning Series Valves
• Design: Next Generation lightweight and sleek housing
• Construction: High-quality materials for long-term durability
• Origin: Made in the USA
• Includes: Remote opener motor and necessary mounting hardware

Secure your nitrous system with the Nitrous Express stainless steel bottle brackets, engineered specifically for 10lb and 15lb aluminum nitrous bottles. These brackets provide a rigid, reliable mounting solution designed to withstand the vibration and G-forces of high-performance racing environments while maintaining a clean, professional appearance.

Construction features high-strength stainless steel for superior corrosion resistance and durability. For racers who need to swap bottles between heats, these brackets utilize integrated T-bolts and oversized wing nuts. This design allows for rapid, tool-free bottle changes, ensuring you spend less time in the pits and more time on the track. The brackets are designed to grip the bottle circumference securely without marring the finish.

• Compatible with standard 10lb and 15lb aluminum nitrous bottles
• Stainless steel construction for long-term durability
• Equipped with T-bolts and wing nuts for fast, manual bottle swaps
• Designed for secure mounting in any vehicle orientation
• Manufacturer Part Number: 11106

Ensure your nitrous system has a reliable and consistent supply with this Nitrous Express 10lb nitrous bottle. Designed for performance applications, this bottle features the Lightning 500 high-flow valve to eliminate flow restrictions and support maximum power output. The exterior is finished in a durable powdercoated finish that resists scratches and chemicals common in racing environments.

This kit includes an integrated 0-1500psi pressure gauge, allowing for real-time monitoring of bottle pressure—critical for maintaining a proper air-fuel ratio and consistent solenoid operation. Every bottle comes with a Certificate of Origin and is built to withstand the rigors of high-pressure nitrous oxide storage.

• Manufacturer Part Number: 11101
• Capacity: 10lb Nitrous Oxide Bottle
• Valve Type: Lightning 500 High-Flow Bottle Valve
• Gauge: 0-1500psi Pressure Gauge included
• Dimensions: 6.89-inch Diameter x 20.19-inch Height
• Finish: Durable powdercoated finish
• Included: Bottle, valve, pressure gauge, and Certificate of Origin

This 10lb nitrous bottle from Nitrous Express (NX) is engineered for high-performance delivery and long-term durability. It features a robust black powdercoated finish designed to withstand the rigors of racing environments while resisting chips and corrosion.

Equipped with the high-flow Lightning 500 bottle valve, this assembly ensures consistent nitrous delivery to your solenoids. The valve is CNC-machined from premium billet aluminum and finished with black anodizing for maximum durability. Measuring 6.89 inches in diameter and 20.19 inches in height, this bottle is compatible with standard 10lb bottle mounting brackets.

• Capacity: 10 lbs
• Valve Type: Lightning 500 (Billet Aluminum)
• Dimensions: 6.89" Diameter x 20.19" Tall
• Finish: Black Powdercoat
• Manufacturer Part Number: 11100B

This Nitrous Express (NX) 10lb nitrous bottle is engineered for high-performance delivery and long-term durability. Each bottle is finished in a rugged powdercoat for maximum protection against the elements and track-use wear. This unit is designed for racers requiring consistent pressure and reliable flow for their nitrous systems.

Equipped with the high-flow Lightning 500 bottle valve, the assembly features a black anodized billet aluminum construction. This valve design optimizes flow path to reduce turbulence, ensuring your system gets the nitrous it needs. The included -6 bottle nipple allows for straightforward plumbing into your existing -6 AN feed lines.

• Capacity: 10 lb
• Valve: Lightning 500 Billet Aluminum (Black Anodized)
• Nipple Size: -6 AN
• Diameter: 6.89 in
• Height: 20.19 in
• Finish: Powdercoated
• Manufacturer Part Number: 11100-6

This Nitrous Express 10lb nitrous bottle (MPN 11100) is a high-capacity storage solution designed for consistent performance and durability. Each bottle features a rugged powdercoated finish that resists scratching and environmental wear, ensuring a professional look for your trunk or chassis mount. This unit comes equipped with the Lightning 500 bottle valve, a high-flow component CNC-machined from billet aluminum and finished in black anodizing for excellent flow characteristics and corrosion resistance.

• Capacity: 10lb
• Valve Series: Lightning 500 High-Flow
• Valve Material: Billet aluminum with black anodized finish
• Bottle Finish: Heavy-duty powdercoat
• Diameter: 6.89 inches
• Height: 20.19 inches
• Manufacturer Part Number: 11100

This Nitrous Express 5lb nitrous bottle (MPN 11050) is engineered for high-performance applications that demand consistent pressure and maximum flow. Each bottle is finished in a durable white powdercoat for superior corrosion resistance and a clean, professional appearance.

Equipped with the high-flow Lightning 500 valve, this unit is CNC-machined from billet aluminum and finished in black anodizing. This valve design optimizes flow paths to prevent pressure drop, ensuring your nitrous system receives the volume needed for maximum output. Measuring 5.25 inches in diameter and 17.64 inches in height, this 5lb capacity tank is an ideal choice for racing setups with limited space.

• Manufacturer Part Number: 11050
• Bottle Capacity: 5 lbs
• Dimensions: 5.25" Diameter x 17.64" Tall
• Valve: Black anodized billet aluminum Lightning 500 valve
• Finish: White powdercoated bottle
• Includes: Certificate of Origin and manufacturer warranty

Maintain a secure, leak-free seal in your nitrous system with the Nitrous Express 1-1/8" O-Ring. This precision-sized replacement seal is designed for use with standard nitrous bottle valves, ensuring proper pressure retention and preventing hazardous leaks during system operation or storage.

Over time, bottle valve O-rings can become compressed, flattened, or damaged during repeated refills and bottle swaps. Replacing a worn seal with this genuine Nitrous Express component restores the integrity of the connection at the bottle, ensuring consistent performance and safety. It is an essential spare part for any racer's pit bag or tool kit.

• Direct replacement for Nitrous Express bottle valves
• Compatible with 5lb, 10lb, 12lb, and 15lb nitrous bottles
• Size: 1-1/8 inch diameter
• Ensures a pressure-tight seal to prevent nitrous loss
• Manufacturer Part Number: 11028

Upgrade your nitrous system plumbing with the Nitrous Express SHO (Super High Output) hose. Engineered for high-flow reliability, this 2-foot hose features a durable Teflon inner lining that resists degradation and ensures clean fuel or nitrous delivery. The exterior is reinforced with high-grade braided stainless steel for superior abrasion resistance and pressure containment.

• Length: 2 Feet
• Hose Size: 4AN
• Fittings: One 4AN nut end and one 3AN nut end
• Material: Teflon-lined braided stainless steel
• Finish: Anodized hose ends for corrosion resistance and a professional look
• Manufacturer Part Number: 10124

These SHO series hoses are designed to handle the high-pressure demands of performance nitrous applications while providing the flexibility needed for clean engine bay routing. The anodized fittings provide a secure, leak-free seal to standard AN adapter bungs.

This Nitrous Express (10024) 24-inch stainless steel braided hose is engineered for high-pressure performance and durability in nitrous oxide delivery systems. Constructed with a Teflon (PTFE) inner liner, this hose is designed to resist chemical degradation and prevent gas permeation, ensuring consistent flow and system integrity. The outer stainless steel braid provides excellent protection against abrasion and prevents hose expansion under high-pressure loads.

Equipped with black anodized fittings for a clean look and corrosion resistance, this -3 AN hose is a reliable solution for plumbing your nitrous kit. It meets the high standards required for both competition and street use.

• Manufacturer Part Number: 10024
• Hose Size: -3 AN
• Length: 24 Inches
• Liner Material: Teflon (PTFE)
• Outer Material: Braided Stainless Steel
• Fitting Finish: Black Anodized