Fabricate high-performance exhaust or intake systems with the precision of Ticon Industries titanium. This 3-inch diameter elbow is engineered for professional builders who prioritize weight reduction without compromising structural integrity. The 1.2mm (0.039") wall thickness provides the ideal balance for welding and durability in high-heat environments.

Featuring a 1.5D loose radius, this 45-degree bend ensures smooth flow characteristics for forced induction or naturally aspirated setups. The "no leg" design allows for maximum versatility in tight engine bays, enabling you to trim and fit the component exactly where needed for custom chassis or exhaust routing.

• Material: High-quality Titanium
• Outside Diameter: 3.0" (76.2mm)
• Wall Thickness: 1.2mm / 0.039"
• Bend Angle: 45 Degrees
• Radius: 1.5D (Loose Radius)
• Leg Style: No Leg / Zero Leg

Fabricate high-performance exhaust systems, intake piping, or intercooler plumbing with this Ticon Industries 3.5-inch diameter titanium tube. Engineered for weight-sensitive racing and performance applications, this 48-inch section provides ample material for custom routing while maintaining superior strength-to-weight ratios compared to traditional stainless steel.

The 1.2mm (0.047-inch) wall thickness is an industry standard for balanced durability and significant weight reduction, offering excellent weldability for professional fabricators using TIG processes. This raw titanium tubing is ideal for those looking to shed pounds without sacrificing structural integrity in high-heat environments.

• Material: High-quality Titanium
• Outer Diameter: 3.5 inches
• Length: 48 inches
• Wall Thickness: 1.2mm / 0.047 inches
• Manufacturer Part Number: 102-08944-0000

The Ticon Industries 3.0-inch Titanium 90 Degree Mandrel Bend is engineered for professional fabricators requiring extreme weight savings and high-temperature durability. Unlike standard stainless steel tubing, this titanium bend provides a superior strength-to-weight ratio, making it an essential component for high-end exhaust systems, intercooler piping, and intake tracts.

Each piece is precision mandrel-bent to ensure a consistent internal diameter throughout the 90-degree sweep, preventing flow restrictions and turbulence. The unequal leg lengths of 7 inches and 9 inches offer versatile trimming options for complex routing in tight engine bays or chassis configurations. This component is designed for high-quality TIG welding applications.

• Diameter: 3.0 inches
• Bend Angle: 90 Degrees
• Wall Thickness: .047" (1.2mm)
• Leg Lengths: 7" and 9"
• Material: Titanium
• Part Number: 101-07654-0000

Ticon Industries 4.0-inch Titanium Pie Cuts are engineered for high-end fabrication where weight reduction and tight packaging are critical. These sections feature a 1D (4.0-inch) Centerline Radius (CLR), allowing for extremely tight turns in exhaust systems, turbo manifolds, and intake piping without compromising flow.

Each pie cut is crafted from titanium with a thin 1mm wall thickness, offering an exceptional strength-to-weight ratio compared to traditional stainless steel. These cuts are precision-cut and ready for TIG welding, helping fabricators achieve professional-grade results in high-heat, high-performance applications.

• Brand: Ticon Industries
• Material: Titanium
• Outside Diameter: 4.0in (101.6mm)
• Wall Thickness: 1mm
• Bend Angle: 45 Degrees (Total per pack)
• Radius: 1D / 4.0in CLR (Tight Radius)
• Quantity: 5-Pack
• MPN: 109-10201-0013

Fabricate complex, tight-radius exhaust sections and intake piping with this Ticon Industries 3.0in Titanium Pie Cut Kit. These high-purity titanium sections are precision-cut to allow for professional-grade fabrication where space is at a premium and weight reduction is critical. This specific set is designed for builders requiring precise 45-degree bends with high-quality material consistency.

This 5-pack of pie cuts provides a total bend of 45 degrees when joined, featuring a tight 1.14D (3.42in) Center Line Radius (CLR). The 1.2mm (0.047in) wall thickness is the industry standard for automotive exhaust applications, offering an ideal balance of durability and lightweight performance. Each piece is ready for TIG welding to ensure a clean, structural finish in custom builds.

• Material: Titanium
• Diameter: 3.0in
• Wall Thickness: 1.2mm (0.047in)
• Total Bend Angle: 45 Degrees
• Center Line Radius (CLR): 3.42in (1.14D)
• Quantity: 5 pieces per pack
• Manufacturer Part Number: 109-07601-0014

Simplify complex fabrication with Ticon Industries 2.50-inch Titanium Pie Cuts. These precision-cut segments are engineered for high-performance automotive applications where space is at a premium and weight reduction is critical. These segments allow fabricators to create custom exhaust, intake, or intercooler plumbing without the limitations of standard mandrel bends.

Each segment is manufactured from CP1 titanium with a 1mm wall thickness, providing an exceptional strength-to-weight ratio and excellent corrosion resistance. This 5-piece set is designed to create a 45-degree bend with a tight 1.26D (3.15-inch) center line radius (CLR), ideal for navigating congested engine bays or tight chassis tunnels.

• Material: High-quality CP1 Titanium
• Outside Diameter: 2.50 inches
• Wall Thickness: 1mm (0.039")
• Center Line Radius: 3.15 inches (1.26D)
• Total Bend Angle: 45 Degrees (combined)
• Quantity: 5 pie cuts per pack
• Manufacturer Part Number: 109-06301-0013

Streamline your custom fabrication with Ticon Industries 2.5-inch Titanium Pie Cuts. Designed for professional fabricators, this 5-pack allows you to construct precise 45-degree bends with a 3.75-inch Center Line Radius (CLR). The loose radius configuration is ideal for routing high-performance exhaust systems, intercooler piping, or intake tracts through complex chassis sections where clearance and weight reduction are paramount.

Each segment is precision-cut from high-grade titanium with a 1mm wall thickness, ensuring excellent weldability and a clean finish. Using pre-cut pie segments eliminates the time-consuming process of manual cutting and deburring, providing uniform angles for consistent flow and structural integrity. These are specifically tailored for TIG welding applications in automotive and powersports environments.

• Manufacturer: Ticon Industries
• Part Number: 109-06301-0003
• Material: Titanium
• Diameter: 2.5in
• Total Bend Angle: 45 Degrees
• Center Line Radius (CLR): 3.75in (Loose Radius)
• Wall Thickness: 1mm
• Quantity: 5-Pack

This Ticon Industries Titanium Transition Reducer Cone is engineered for professional fabricators constructing high-performance exhaust systems, intake tracts, or custom turbo plumbing. Precision-formed from high-grade titanium, this cone provides a smooth flow transition between 3.0-inch and 4.0-inch tubing sections, helping to minimize turbulence in custom plumbing setups.

Designed for TIG welding in demanding automotive and motorsport applications, this transition features a compact 2-3/8 inch overall length. Its short footprint makes it an ideal solution for tight engine bays or complex exhaust routing where space is at a premium and a gradual transition is required between different tube diameters.

• Material: Titanium
• Small End Diameter: 3.0 in
• Large End Diameter: 4.0 in
• Overall Length (OAL): 2-3/8 in (2.375 in)
• Manufacturer Part Number: 107-10276-0000

This Ticon Industries titanium transition reducer cone is an essential component for professional-grade fabrication. It provides a clean, structural transition between 2.0-inch and 3.0-inch diameter tubing, making it ideal for custom exhaust systems, downpipes, and intake tracts where weight reduction and corrosion resistance are priorities.

• Manufacturer Part Number: 107-07650-0000
• Material: High-quality CP1 Titanium
• Transition Range: 2.0" to 3.0" diameter
• Overall Length (OAL): 2-3/8" (2.375")
• Applications: Custom exhaust, turbo plumbing, and intake fabrication

Each cone is manufactured to strict tolerances, ensuring consistent wall thickness and diameter accuracy for precise fitment and easier TIG welding. The titanium construction offers superior strength-to-weight ratios compared to stainless steel alternatives.

The Ticon Industries 3.5" Titanium Male/Female Slip Fit Connector Set (105-08903-0000) provides a high-performance solution for professional exhaust and turbocharger fabrication. Engineered to handle the extreme heat of performance racing applications, these connectors allow for easy system disassembly and provide the necessary clearance for thermal expansion while maintaining a secure, interlocking connection.

• Precision-machined from lightweight, high-grade titanium for superior corrosion resistance.
• 3.5-inch diameter designed for seamless integration with matching titanium tubing.
• Interlocking male and female design ensures consistent alignment and a leak-resistant joint.
• Optimized for weight-sensitive builds where high-strength and heat tolerance are required.
• Manufacturer Part Number: 105-08903-0000

This Ticon Industries titanium tube is engineered for professional fabricators who demand high strength and minimal weight for custom automotive projects. With a 5.0-inch outer diameter and a thin 1mm (.039-inch) wall, this tubing is an ideal choice for high-end intake systems, intercooler piping, and custom exhaust components.

• Diameter: 5.0 inches
• Length: 24.0 inches
• Wall Thickness: 1mm (.039 inches)
• Material: Titanium
• Manufacturer Part Number: 102-12723-0000

Titanium provides superior heat resistance and a significantly better strength-to-weight ratio than traditional stainless steel. This 24-inch section offers ample material for precise cutting and welding in performance fabrication environments.

The Ticon Industries 3.5" Titanium 90 Degree Elbow is engineered for high-performance fabrication where space is at a premium and weight savings are critical. Manufactured from high-quality CP1 titanium, this 1D (tight radius) elbow is ideal for custom exhaust systems, intake piping, and intercooler plumbing. The "No Leg" design allows fabricators to create extremely tight turns without the need for additional trimming of excess straight sections.

With a 1.2mm (0.049") wall thickness, this elbow provides the perfect balance of durability and lightweight performance. It is designed to be TIG welded and is a staple for professional builders constructing forced induction systems or lightweight race exhausts where precision tolerances are required.

• Brand: Ticon Industries
• Material: CP1 Titanium
• Outer Diameter: 3.5 inches
• Wall Thickness: 1.2mm / .049"
• Bend Angle: 90 Degrees
• Bend Radius: 1D (Centerline Radius)
• Configuration: No Leg
• MPN: 101-08954-3110

Fabricate lightweight, high-performance exhaust or intake systems with this Ticon Industries 3.0-inch diameter titanium 90-degree elbow. Engineered for precision and durability, this CP1 titanium elbow is designed for professional builders who demand maximum weight savings without sacrificing structural integrity.

This elbow features a 1D (1 x Diameter) Center Line Radius (CLR) of 3 inches, making it ideal for tight-clearance packaging in engine bays or chassis tunnels where space is at a premium. The 1.2mm (.047 inch) wall thickness provides the optimal balance of weldability and strength for forced induction and high-heat applications.

• Material: High-quality CP1 Titanium
• Outside Diameter: 3.0in (76.2mm)
• Bend Angle: 90 Degrees
• Center Line Radius (CLR): 3.0in (1D)
• Wall Thickness: 1.2mm (.047in)
• Manufacturer Part Number: 101-07654-3110

This Ticon Industries 90-degree titanium elbow is a precision-engineered component designed for professional-grade automotive fabrication. Featuring a tight 1D bend radius with a 1.75-inch Center Line Radius (CLR), this elbow is specifically suited for high-clearance applications where space is limited. The lightweight titanium construction offers superior corrosion resistance and an exceptional strength-to-weight ratio compared to traditional stainless steel piping.

The 1mm (.039-inch) wall thickness provides the necessary durability for custom intake tracts, cooling system plumbing, or exhaust manifolds without adding unnecessary mass. This mandrel-bent elbow maintains a consistent diameter throughout the sweep to ensure optimal flow characteristics for forced induction setups and custom performance builds.

• Material: Titanium
• Outer Diameter: 1.75in
• Bend Angle: 90 Degrees
• Center Line Radius (CLR): 1.75in (1D)
• Wall Thickness: 1mm (.039in)
• Manufacturer Part Number: 101-04553-3110

Vibrant Performance Titanium Pie Cuts are engineered for professional fabricators building lightweight, high-strength exhaust systems and intake tracts. These segments are manufactured entirely from CP1 (Grade 1) Titanium, providing an exceptional strength-to-weight ratio and superior corrosion resistance for demanding motorsport applications.

By using individual pie cuts, fabricators can create precise, complex bends in tight engine bays where traditional mandrel-bent tubing is impractical. These pieces are supplied unwelded, allowing for total control over the bend angle and orientation during the fabrication and TIG welding process.

• Material: CP1 Grade 1 Titanium
• Outer Diameter: 2.50 inches (OD)
• Fabrication Style: Unwelded segments
• Application: Custom exhaust and intake systems
• Manufacturer Part Number: 13525

The Vibrant Performance 13234 Titanium Slip Fit Sleeve is engineered for fabricators building lightweight, low-profile exhaust systems. Manufactured from 1mm (0.039") thick Grade 1 CP1 Titanium, this connector facilitates tight joints to maximize ground clearance on lowered vehicles or precision race applications. These slip joints are particularly effective when transitioning between stainless steel and titanium sections. Every sleeve is pre-slotted to simplify installation and ensure a secure clamping surface.

• Manufacturer Part Number: 13234
• Material: Grade 1 CP1 Titanium
• Wall Thickness: 1mm (0.039")
• Outer Diameter: 2.50in
• Pre-slotted ends for easy clamping
• Low-profile design for improved ground clearance
• Compatible for transitions from Stainless Steel to Titanium
• Recommended for use with Torca Accuseal Clamps to ensure a leak-free connection

Ticon Industries Titanium Pie Cuts are engineered for professional fabricators requiring precision and weight savings in custom exhaust, intake, or intercooler plumbing. These 3.5-inch diameter segments are pre-cut to allow for the creation of a tight 45-degree bend with a 1D Center Line Radius (CLR). By using high-grade titanium with a thin 1mm wall, these components offer an exceptional strength-to-weight ratio and superior corrosion resistance compared to stainless steel.

• Diameter: 3.5 inches (88.9mm)
• Wall Thickness: 1mm (0.039 inches)
• Bend Angle: 45 Degrees (total 5-piece set)
• Center Line Radius: 1D CLR
• Material: Titanium
• Quantity: 5-Piece Pack
• Part Number: 109-08901-0014

Each segment is precision-cut and ready for TIG welding, eliminating the need for complex mitering or manual cutting. This set provides the flexibility to navigate tight engine bays or chassis constraints where traditional mandrel bends may be impractical.

Fabricate high-performance, lightweight exhaust and intake systems with precision using Ticon Industries 3.0-inch 1D Tight Radius Titanium Pie Cuts. These 7.5-degree sections are specifically engineered for professional fabricators who require maximum clearance in tight engine bays or chassis configurations where standard mandrel bends are too bulky. With a 1mm (.039") wall thickness, these sections offer substantial weight savings over stainless steel without compromising the structural integrity of your weldments.

Each pie cut is manufactured from commercially pure titanium, ensuring excellent weldability and high resistance to corrosion and heat. The 1D center line radius (3.0-inch CLR) allows for the tightest possible routing for custom turbo manifolds, downpipes, and intricate exhaust paths. These sections are deburred and cleaned, ready for immediate TIG welding right out of the package.

• Material: Commercially Pure Titanium
• Outside Diameter: 3.0 inches (76.2mm)
• Wall Thickness: 1mm (.039")
• Bend Angle: 7.5 Degrees per piece
• Center Line Radius (CLR): 3.0 inches (1D)
• Quantity: 6-Pack
• Manufacturer Part Number: 109-07602-0013

This Ticon Industries 3.5-inch titanium tube is engineered for high-performance fabrication where weight reduction and material integrity are critical. At 24 inches in length with a precise 1.2mm (0.047") wall thickness, this tubing is ideal for custom intake systems, exhaust sections, and intercooler plumbing.

Manufactured from high-quality CP1 titanium, this tube provides exceptional corrosion resistance and a superior strength-to-weight ratio compared to traditional stainless steel. It is designed to be easily welded using standard TIG processes with titanium filler rod, making it a staple for professional fabricators building race-spec components.

• Material: CP1 Titanium
• Outer Diameter: 3.5 in (89mm)
• Length: 24.0 in (610mm)
• Wall Thickness: 1.2mm (0.047 in)
• Part Number: 102-08924-0000

Vibrant Performance CP1 Grade Titanium mandrel bends are the premier choice for professional fabricators seeking an optimal strength-to-weight ratio. This ultra-lightweight 90-degree tube is engineered to withstand the extreme rigors of motorsport while providing significant weight savings over traditional stainless steel components.

• Material: CP1 Grade Titanium
• Outside Diameter: 2.5 in
• Bend Angle: 90 Degrees
• Center Line Radius (CLR): 3.0 in
• Leg Length: 6.0 in
• Construction: Mandrel bent for uniform wall thickness and unrestricted flow
• Manufacturer Part Number: 13902

Designed for custom exhaust systems, intake plumbing, and high-performance cooling applications, this 13902 mandrel bend ensures durability and material integrity in high-heat environments. Its high-purity titanium construction allows for clean, reliable welds required for top-tier fabrication projects.

Vibrant Performance CP1 Grade Titanium Pie Cuts are engineered for high-end fabrication where weight reduction and material integrity are critical. These 4.0-inch O.D. sections are ideal for building custom exhaust systems, intake piping, or intercooler plumbing. Manufactured from commercially pure Grade 1 titanium, they offer exceptional corrosion resistance and a superior strength-to-weight ratio compared to traditional stainless steel.

Supplied as a bag of six unwelded segments, these pie cuts allow fabricators to achieve complex, precise bends and tight radii without the need for a mandrel bender. Each piece is precision-cut and ready for TIG welding, ensuring clean joints and a professional finish for high-performance forced induction or naturally aspirated projects.

• Material: CP1 Grade Titanium
• Outside Diameter: 4.0 inches (101.6mm)
• Quantity: Bag of 6
• Condition: Unwelded for custom fabrication
• Manufacturer Part Number: 13540

Vibrant Performance CP1 Grade Titanium Pie Cuts are engineered for professional fabricators building high-performance exhaust systems, intakes, and intercooler piping where weight reduction and material integrity are critical. These 3.50-inch O.D. sections are manufactured from premium CP1 titanium, offering a superior strength-to-weight ratio and exceptional corrosion resistance.

Designed to simplify the creation of complex, custom-radius bends without a mandrel bender, these pie cuts are supplied unwelded to allow for precise fitment in tight engine bays or chassis tunnels. They provide a professional-grade solution for custom turbo-back systems and lightweight intake tracts where durability under extreme thermal stress is required.

• Material: CP1 Grade Titanium
• Outside Diameter: 3.50 inches
• Quantity: Bag of 6 pieces
• Configuration: Unwelded for custom fabrication
• Manufacturer Part Number: 13535

Vibrant Performance CP1 Grade 1 Titanium Pie Cuts provide fabricators with high-grade materials for building complex, custom bends in exhaust systems, intake tracts, and intercooler piping. Manufactured from commercially pure titanium, these slices offer an exceptional strength-to-weight ratio and superior corrosion resistance for demanding performance applications.

These 2.25-inch OD pie cuts are supplied unwelded, allowing for precise adjustment and fitment in tight engine bays or chassis locations where standard mandrel bends cannot provide the necessary clearance or weight savings.

• Material: CP1 Grade 1 Titanium
• Outside Diameter: 2.25 inches
• Condition: Unwelded / Raw Finish
• Manufacturer Part Number: 13522
• Ideal for high-strength, lightweight custom fabrication projects

Vibrant Performance CP1 Grade Titanium Pie Cuts are engineered for professional fabricators requiring maximum strength and minimal weight for custom exhaust and intake systems. These 1.75-inch OD segments are crafted from commercially pure Grade 1 titanium, ensuring excellent weldability and high-temperature durability.

These pie cuts are sold as unwelded segments, allowing for precise customization of bend radii and routing in complex engine bays. CP1 titanium is significantly lighter than 304 stainless steel, making it the preferred choice for race-spec builds and high-end performance applications.

• Part Type: Titanium Pie Cut Segments
• Material: CP1 Grade Titanium
• Outside Diameter: 1.75in
• Condition: Unwelded
• Manufacturer Part Number: 13517

Vibrant Performance CP1 Grade Titanium straight tubing is engineered for professional fabricators who require an exceptional strength-to-weight ratio for custom automotive projects. This 4-inch outer diameter (O.D.) tube measures 1 meter in length and is constructed from Commercially Pure Grade 1 (CP1) titanium to ensure durability under the extreme conditions of professional racing.

Titanium fabrication provides a significant weight reduction compared to stainless steel while maintaining excellent corrosion resistance and structural integrity. This tubing is ideal for custom exhaust systems, intake piping, and charge pipes where weight savings and heat management are critical priorities.

• Material: CP1 Grade Titanium (Grade 1)
• Outer Diameter: 4.000 in.
• Tube Length: 1 Meter (39.37 in.)
• Application: Custom exhaust, intake, and coolant plumbing
• Manufacturer Part Number: 13376

Vibrant Performance CP1 Grade Titanium straight tubing is engineered for professional fabricators requiring an exceptional strength-to-weight ratio for high-performance automotive applications. This 3.5-inch O.D. tube is manufactured from high-purity CP1 Grade Titanium, offering significant weight reduction compared to traditional stainless steel while maintaining excellent structural integrity and corrosion resistance.

Each 1-meter length provides a uniform surface finish and consistent wall thickness, making it the ideal starting point for custom exhaust systems, intake piping, and lightweight structural components. Built to withstand the extreme heat and mechanical rigors of motorsport, this tubing is a staple for weight-conscious racing builds.

• Material: CP1 Grade Titanium
• Outer Diameter: 3.5 in. (88.9 mm)
• Length: 1 Meter (approx. 39.37 in.)
• Manufacturer Part Number: 13375
• Characteristics: Ultra-lightweight, high strength-to-weight ratio, professional-grade fabrication quality

Vibrant Performance CP1 Grade Titanium straight tubing is engineered for professional fabricators requiring an exceptional strength-to-weight ratio for high-performance applications. This 1-meter length of 3-inch O.D. tubing provides the foundation for building lightweight exhaust systems, custom intakes, and structural components where every gram counts.

Manufactured entirely from CP1 Grade Titanium, this tubing is designed to withstand the high-heat environments and rigors of racing. Its precise tolerances and high-quality finish ensure consistent performance during TIG welding and custom fabrication, making it a staple for motorsport-grade projects.

• Material: CP1 Grade Titanium
• Outside Diameter: 3.00" (76.2mm)
• Length: 1 Meter (39.37")
• Finish: Natural Titanium
• Ideal for custom exhaust, intake, and cooling systems
• Manufacturer Part Number: 13374

Vibrant Performance 13372 is a premium CP1 Grade Titanium straight tube engineered for professional fabricators who require an exceptional strength-to-weight ratio. This 1-meter length of 2.5-inch O.D. tubing is specifically designed for custom exhaust systems, intake piping, and lightweight structural components where every gram counts.

Manufactured from Commercially Pure Grade 1 (CP1) titanium, this tubing provides excellent corrosion resistance and the ability to withstand the extreme thermal cycles of high-performance racing environments. Its ultra-lightweight properties make it the preferred choice over stainless steel for weight-sensitive builds.

• Part Number: 13372
• Material: CP1 Grade Titanium
• Outer Diameter: 2.5 in. (63.5mm)
• Length: 1 Meter (39.37 in.)
• Grade: Commercially Pure Grade 1 (CP1)
• Application: Exhaust, intake, and cooling system fabrication

Vibrant Performance CP1 Grade Titanium straight tubing is engineered for professional fabricators requiring an exceptional strength-to-weight ratio for custom exhaust, intake, or cooling systems. This 1-meter length of 2.25-inch OD tubing provides the durability needed for high-performance racing environments while significantly reducing overall vehicle weight compared to traditional stainless steel alternatives.

Constructed from high-purity CP1 grade titanium, this tubing offers excellent corrosion resistance and superior weldability. It is designed to withstand the intense thermal stress and physical rigors of motorsport applications, making it a staple for premium forced induction and exhaust builds where every ounce of weight savings matters.

• Material: CP1 Grade Titanium
• Outer Diameter (OD): 2.25 inches (57.15mm)
• Length: 1 Meter (39.37 inches)
• Lightweight construction for maximum weight reduction
• High-strength professional-grade fabrication component
• Manufacturer Part Number: 13371

Vibrant Performance CP1 Grade Titanium Tubing is engineered for professional fabricators who require an exceptional strength-to-weight ratio for custom exhaust systems, intake piping, and cooling components. This straight tube is manufactured from high-purity CP1 Grade Titanium, offering the durability needed to withstand the rigors of professional racing while providing significant weight savings over stainless steel alternatives.

• Material: CP1 Grade Titanium
• Outer Diameter: 2.00" (50.8mm)
• Length: 1 Meter (39.37")
• Ideal for weight-sensitive racing and high-performance fabrication
• Highly durable and corrosion-resistant construction
• Designed for superior weldability in custom applications
• Manufacturer Part Number: 13370