The Edelbrock Universal Fuel Sump Kit #36031 provides a high-pressure fuel solution for EFI conversions on vehicles originally equipped with low-pressure carbureted fuel systems. This self-contained module installs under the hood, utilizing the factory fuel tank and low-pressure pump to deliver constant fuel pressure without requiring tank modifications or a full-length return line.

This kit is ideal for engine swaps and aftermarket EFI systems like Pro-Flo 3 and Pro-Flo 4. It features an adjustable internal regulator with a vacuum reference port, allowing for precise tuning between 35 and 90 PSI to meet specific engine requirements.

• Performance: Supports up to 600 HP with a flow rate of 67 GPH (approx. 255 LPH).
• Adjustability: Integrated regulator adjustable from 35 to 90 PSI with vacuum reference port.
• Complete Kit: Includes electrical harness, fuel hose, filter, fittings, and mounting hardware (MPN 36031).
• Installation: Designed for easy under-hood mounting; requires a vent line to be run back to the fuel tank.

Note: This unit is not intended for off-road use, rock crawling, or applications where the vehicle is sustained at incline or decline angles greater than 45 degrees for extended periods.

Fits 2025 Ram 2500 and 3500 Mega Cab Short Bed pickups equipped with the Cummins diesel engine.

The Titan Fuel Tanks Gen 7 XXL replacement fuel tank offers a massive 50-gallon usable capacity, significantly extending your vehicle's range for towing and long-distance hauling. Manufactured from military-grade High-Density Cross-Linked Polyethylene (XLHDPE), this tank is engineered to be nearly 200 times less heat and cold conductive than traditional metal tanks. This material choice virtually eliminates internal condensation and prevents the corrosion common in OE steel tanks.

Designed as a direct-fit, bolt-in application, the 7030225 installs without the need for fabrication or cutting. The tank features a low fuel trap design to ensure all 50 gallons are usable and hangs approximately 2.5 inches lower than the factory tank for minimal impact on ground clearance. Each kit includes a black-coated, galvanized steel mounting strap and a robust front support system to ensure a secure, rattle-free installation using factory mounting points.

• Manufacturer Part Number: 7030225
• Usable Capacity: 50 Gallons
• Material: Military-grade Cross-Linked Polyethylene (XLHDPE)
• Installation: Direct bolt-in; no fabrication required
• Included Hardware: Black-coated galvanized steel mounting straps and front support
• Compatibility: Compatible with most bio-diesel blends
• Features: Exclusive Titan sending unit mounting system and low fuel trap

The Radium Engineering FCST Adapter (MPN 20-1127) provides a critical solution for retrofitting older Radium Fuel Cell Surge Tanks. This adapter plate allows modern 3-bolt filler necks to be utilized on legacy FCST models that were originally manufactured with 6-bolt filler neck hole patterns.

By bridging the gap between hardware generations, this adapter ensures your fueling system remains compatible with current fill necks and accessories without the need for a full surge tank replacement. It provides a secure, leak-free interface designed to withstand the rigors of high-performance fuel systems.

• Direct fit for older Radium Fuel Cell Surge Tanks (FCST)
• Converts 6-bolt patterns to current 3-bolt fill neck standards
• Precision machined for a secure seal
• Manufacturer Part Number: 20-1127

Upgrade your Radium Engineering Spare Tire fuel cell with this high-strength, lightweight carbon fiber lid. Engineered specifically as a direct replacement for the standard lid, this component reduces weight while providing the distinct aesthetic of professional-grade composite construction.

This lid is manufactured using a 2x2 3k twill dry carbon fiber process to ensure maximum structural integrity and a precise fit. Installation is straightforward, as it is designed to reuse the hardware provided with the original fuel cell assembly.

• Manufacturer Part Number: 13-0411-01
• Material: 2x2 3k twill dry carbon fiber
• Construction: Dry carbon process for weight savings and strength
• Compatibility: Exclusively fits Radium Engineering Spare Tire fuel cells
• Installation: Reuses existing fuel cell fasteners

Fits 2007-2011 Jeep Wrangler and Wrangler Unlimited (3.8L).

This Omix coolant overflow reservoir is a direct replacement for the factory unit, engineered to meet or exceed OE standards for fit and function. Over time, original plastic reservoirs often become brittle and develop leaks due to repeated heat cycles. This replacement bottle restores the integrity of your cooling system, ensuring proper coolant expansion and recovery.

• Direct-fit replacement for OE part number 55056542AE
• Durable plastic construction designed to withstand underhood temperatures
• Includes the reservoir bottle, tethered cap, and inlet hose
• Fits all Wrangler JK submodels equipped with the 3.8L engine
• Manufacturer Part Number: 17103.06
• Backed by a Limited 5-Year Warranty

The Aeromotive 15 Gallon Eliminator Stealth Fuel Cell (MPN 18662) delivers professional-grade fuel management by integrating a high-performance Eliminator fuel pump directly into a 15-gallon reservoir. This all-in-one Stealth system eliminates the complexity of external pump mounting while ensuring the pump remains submerged and cool for consistent fuel delivery under extreme track conditions.

Engineered with meticulous aerospace tolerances, this fuel cell utilizes Aeromotive's proven internal baffling to prevent fuel slosh and starvation during high-G cornering and acceleration. Whether you are building a high-horsepower street car or a dedicated track machine, this unit provides the reliability required for demanding fuel systems.

• Manufacturer Part Number: 18662
• Capacity: 15 Gallons
• Series: Eliminator Stealth
• Internal baffling for superior fuel slosh control
• Integrated high-flow Eliminator fuel pump for EFI or carbureted applications
• Designed with aerospace-grade tolerances and procedures

Fits select 1999-2010 Ford F-350 Super Duty (Narrow Frame Cab & Chassis) equipped with diesel engines.

The Titan Fuel Tanks 8020099 is a 40-gallon after-axle replacement tank designed to solve the common issues of corrosion and lining failure found in original steel tanks. Constructed from military-grade, cross-linked polyethylene (XLHDPE), this tank is significantly tougher than steel and lighter than aluminum. The one-piece molded design eliminates welds and seams, ensuring a leak-proof container that is naturally resistant to the thermal conductivity of metal tanks, which helps reduce fuel condensation.

• Manufacturer Part Number: 8020099
• Capacity: 40 Gallons
• Material: Military-grade Cross-linked Polyethylene (XLHDPE)
• Location: After-Axle, Frame Mounted
• Dimensions: 31.31" x 31.20" x 15.00"
• Compatibility: Diesel fuel and most bio-diesel blends
• Weight: Approximately 1/3 the weight of steel tanks
• Application Note: Replaces tanks utilizing PS-123 sending units (sending unit not included)
• Fitment Note: 1999 models with original 37-gallon tanks require additional Ford straps and skid plates

This unit replaces several Ford OEM part numbers, including: XC3Z9002AA, 6C3Z9002BA, 6C3Z9002A, 6C3Z9002E, 6C3Z9002F, 3C3Z9002AA, and 5C3Z9002BB.

Fits 2011-2019 Ford F-350 Super Duty Narrow Frame Cab & Chassis models.

The Titan Fuel Tanks 8020011 is the definitive upgrade for narrow-frame utility vehicles, offering a 40-gallon capacity in a rugged, after-axle configuration. Engineered to replace failure-prone steel OEM tanks, this unit is constructed from military-grade, cross-linked polyethylene (XLHDPE). This advanced polymer is one-third the weight of steel, virtually indestructible, and naturally resistant to the corrosion and lining delamination that plagues metal tanks. Its seamless, one-piece construction eliminates weld failures while providing superior thermal insulation to reduce fuel condensation.

• Part Number: 8020011
• Capacity: 40 Gallons
• Material: Military-grade XLHDPE (Cross-linked Polyethylene)
• Replaces OE Part Numbers: CC3Z9B210B, CC3Z9002B
• Dimensions: 29.95" x 31.1" x 15.00"
• Compatible with Diesel fuel and most bio-diesel blends
• Features the exclusive TITAN Sending Unit Mounting System
• Note: For 2017-2019 trucks, fitment requires the fuel tank water separator to be located outside of the rear frame rail support/brace
• Sending unit not included; fits in the factory stock tank location

Fits 2025 Ram 2500 and 3500 pickups equipped with the Cummins diesel engine and Crew Cab Long Bed configuration. This Titan Gen 7 XXL tank replaces the factory unit to provide a massive 55-gallon fuel capacity, significantly extending your vehicle's range.

Constructed from military-grade High-Density Cross-Linked Polyethylene (XLHDPE), this tank is engineered for extreme durability and chemical resistance. Unlike metal tanks, it is corrosion-proof and features a low fuel trap design that ensures all 55 gallons are usable capacity. The Gen 7 design allows for a direct-fit, bolt-in installation using factory mounting points, with the bottom of the tank sitting only approximately 2.5 inches lower than the stock tank.

• Manufacturer Part Number: 7030325
• Material: High-Density Cross-Linked Polyethylene (XLHDPE)
• Capacity: 55 Gallons (Total Usable)
• Finish: Natural XLHDPE with black-coated, galvanized steel mounting straps
• Installation: Direct bolt-in replacement; no cutting or fabrication required
• Design: Features an exclusive low fuel trap for maximum usable fuel volume
• Compatibility: Compatible with high-flow truck stop pumps (optional fast fill vent kit sold separately)
• Includes: Tank, galvanized steel mounting straps, and necessary installation hardware

Fits select 2003-2012 Dodge and Ram 2500/3500 pickups with Crew Cabs or Quad Cabs, Long Beds, and Cummins diesel engines.

The Titan 60 Gallon XXL Mid-Ship Replacement Fuel Tank nearly doubles the fuel capacity of your stock tank, providing the extended range needed for heavy towing and long-distance travel. This extra-capacity tank is engineered with an exclusive low fuel trap design to ensure all 60 gallons are usable capacity. Built for extreme durability, it features a one-piece construction with no welds or seams, eliminating common points of failure.

• Increased Range: Nearly double the capacity of factory mid-ship tanks.
• Military-Grade Construction: Manufactured from 1/4-inch thick cross-linked polyethylene (XLHDPE) for maximum impact resistance.
• Thermal Efficiency: XLHDPE is significantly less conductive than steel or aluminum, reducing fuel temperature fluctuations and condensation.
• Corrosion Resistant: The polymer construction will never rust or corrode and is compatible with most bio-diesel blends.
• Hardware Included: Comes with black-coated, galvanized steel mounting straps and the exclusive TITAN sending unit mounting system.

• Manufacturer Part Number: 7030303
• Capacity: 60 Gallons
• Material: Cross-Linked Polymer (XLHDPE)
• Wall Thickness: Minimum 0.25 in
• Weight: 1/3 the weight of equivalent steel tanks
• Warranty: 5 Year Limited Warranty
• Origin: Made in the U.S.A.

Fits select 2013-2025 Ram 2500 and 3500 Mega Cab models with 6.5-foot short beds and Cummins diesel engines.

Maximize your driving range and minimize fuel stops with the Titan Fuel Tanks XXL Mid-Ship replacement tank. Designed to replace the factory 31-gallon unit, this 51-gallon capacity tank provides nearly double the fuel volume for long-distance towing and hauling. Engineered from military-grade, cross-linked polymer (XLHDPE), this tank is at least 1/4-inch thick, making it tougher than steel and more durable than aluminum while remaining 1/3 the weight of steel alternatives. The low-fuel trap design ensures consistent fuel pickup, and the tank profile sits only 2.875 inches lower than the stock (OEM) tank for excellent ground clearance.

• Manufacturer Part Number: 7030213
• Capacity: 51 Gallons
• Material: Military-grade Cross-Linked Polyethylene (XLHDPE)
• Wall Thickness: Minimum 1/4 inch
• Construction: One-piece molded with no welds or seams
• Corrosion Resistance: Will not rust or corrode; 415x less heat/cold conductive than aluminum
• Installation: Clean, bolt-on fitment with no drilling or cutting required
• Included Hardware: Stainless steel interior flanges, galvanized steel mounting straps, plated high-strength steel front support, mounting bushings, and rollover safety vent valves

Fits 2025 Ram 2500 and 3500 4WD pickups with Crew Cabs, Short Beds, and Cummins diesel engines.

Increase your driving range and reduce fuel stop frequency with the Titan Fuel Tanks Gen 7 XXL replacement mid-ship tank. This 52-gallon tank is engineered to replace the factory fuel vessel, utilizing a direct-fit, bolt-in design that requires no cutting or fabrication. Manufactured from High-Density Cross-Linked Polyethylene (XLHDPE), this military-grade polymer construction is nearly 200 times less conductive to heat and cold than steel tanks, effectively eliminating condensation and preventing corrosion.

The Gen 7 design features an exclusive low fuel trap that ensures all 52 gallons are usable capacity. The tank is designed for maximum clearance, hanging only approximately 2 inches lower than the stock tank. It comes equipped with a black-coated, galvanized steel mounting strap set and the exclusive TITAN sending unit mounting system for a secure, professional installation.

• Manufacturer Part Number: 7030125
• Capacity: 52 Gallons (Usable)
• Material: High-Density Cross-Linked Polyethylene (XLHDPE)
• Compatible with most bio-diesel blends
• Includes black-coated galvanized steel mounting straps
• Direct-fit application for Crew Cab, Short Bed (6'4") models
• Compatible with optional fast-fill vent kits and transfer pump kits (sold separately)

Fits 2013-2025 Ram 2500 and 3500 Crew Cab, Short Bed pickups equipped with Cummins diesel engines.

Nearly double your vehicle's driving range with the Titan XXL Mid-Ship Replacement Fuel Tank. This 52-gallon tank is engineered to replace the factory mid-ship tank with a high-capacity, heavy-duty solution that ensures you aren't searching for a station when towing or overlanding. Utilizing an exclusive low-fuel trap design, Titan ensures all 52 gallons are usable capacity. The tank is designed for a precise fit, hanging only approximately 2 inches lower than the OEM tank to maintain ground clearance.

Constructed from military-grade, cross-linked polyethylene (XLHDPE), this tank is significantly tougher than factory units and aftermarket metal tanks. The one-piece, seamless construction eliminates weld failures, while the 1/4-inch thick walls provide extreme impact resistance. At roughly 1/3 the weight of steel, the polymer material is naturally resistant to corrosion and condensation, and it is hundreds of times less conductive to heat and cold than aluminum or steel tanks.

• Manufacturer Part Number: 7030113
• Capacity: 52 Gallons (Full Usable Capacity)
• Material: Military-grade cross-linked polymer (XLHDPE)
• Mounting Hardware: Black-coated, galvanized steel straps included
• Installation: Direct bolt-in application; no cutting or fabrication required
• Fuel Compatibility: Diesel and most bio-diesel blends
• Thickness: Minimum 1/4 inch wall thickness
• Origin: Made in the U.S.A.

Fits 2011-2016 Ford F-250 and F-350 Super Duty Crew Cab Short Bed pickups (Power Stroke).

The Titan Fuel Tanks 7021211 XXL Mid-Ship Replacement Tank provides a massive 60-gallon capacity, significantly extending the driving range of your 2011-2016 Ford Super Duty. Engineered as a direct replacement for the factory mid-ship tank, this unit is ideal for towing and long-distance travel. It utilizes an exclusive low fuel trap design that ensures all 60 gallons of capacity are usable.

This tank is manufactured from military-grade, cross-linked polyethylene (XLHDPE) with a minimum wall thickness of 1/4 inch. This polymer construction is approximately 200 times less heat and cold conductive than traditional metal tanks, which prevents internal condensation and eliminates corrosion. The system includes black-coated, galvanized steel mounting straps and a front support system designed to interface with the factory sending unit.

• Capacity: 60 Gallons (XXL)
• Material: Cross-Linked High-Density Polyethylene (XLHDPE)
• Wall Thickness: 0.25 inch minimum
• Thermal Properties: 200x less conductive than steel
• Compatibility: Compatible with most bio-diesel blends
• MPN: 7021211
• Warranty: Lifetime Manufacturer Warranty

This Part Fits:

Fits select 2017-2025 Ford F-250 and F-350 Super Duty trucks equipped with Power Stroke diesel engines, Crew Cabs, and 8-foot Long Beds.

The Titan Fuel Tanks 7020317 XXL Mid-Ship Replacement Tank nearly doubles the fuel capacity of your factory tank, providing 65 gallons of usable volume for significantly extended driving range. Engineered specifically for the Ford Super Duty platform, this tank features an exclusive low fuel trap design to ensure the entire 65-gallon capacity is accessible, providing peace of mind during long-haul towing and remote travel.

Every Titan tank is manufactured from military-grade, cross-linked polymer (XLHDPE) with a minimum wall thickness of 1/4-inch. This seamless, one-piece molded construction eliminates the weld points common in metal tanks that can leak or fail over time. The XLHDPE material is 1/3 the weight of steel and provides superior thermal insulation, being 200 times less conductive than steel and 415 times less conductive than aluminum, which helps minimize fuel condensation and temperature fluctuations.

• Manufacturer Part Number: 7020317
• Capacity: 65 Gallons (Total usable capacity)
• Material: Military-grade Cross-Linked Polyethylene (XLHDPE)
• Construction: One-piece, seamless molded design
• Mounting: Includes black-coated, galvanized steel mounting straps and front support system
• Sending Unit: OEM-style torque ring mounting system
• Fuel Compatibility: Compatible with most bio-diesel blends
• Durability: Corrosion-proof, rust-proof, and impact-resistant
• Warranty: Lifetime Warranty

Fits 2017-2025 Ford F-250 and F-350 Super Duty Crew Cab models with 6.5-foot short beds and the 6.7L PowerStroke Diesel engine.

Increase your Ford Super Duty's range and eliminate frequent fuel stops with the Titan Fuel Tanks XXL 55 Gallon Mid-Ship Replacement Tank. This heavy-duty tank nearly doubles the capacity of the factory unit, providing significant autonomy for long-haul towing and off-grid exploration. The low fuel trap design ensures that all 55 gallons are usable capacity, keeping you on the road longer.

Constructed from military-grade, cross-linked polyethylene (XLHDPE), this tank is at least 1/4-inch thick and significantly more durable than factory steel or aluminum. The polymer construction is naturally resistant to corrosion and condensation, and it provides 200 times less thermal conductivity than steel, maintaining more stable fuel temperatures. This direct replacement tank utilizes an OEM-style torque ring sending unit mounting system and includes black-coated, galvanized steel mounting straps and a front support system.

• Manufacturer Part Number: 7020217
• 55 Gallon usable capacity
• Military-grade XLHDPE polymer construction (1/4" minimum thickness)
• Seamless design with no welds to fail
• 1/3 the weight of comparable steel tanks
• Corrosion-proof and compatible with most bio-diesel blends
• Includes galvanized steel mounting straps and front support
• Designed for Crew Cab models with 6.5' Short Bed
• Lifetime warranty included
• Made in the U.S.A.

Fits select 2020-2025 Chevrolet Silverado and GMC Sierra 2500 HD/3500 HD pickups equipped with the Duramax diesel engine, Crew Cab, and Long Bed (8') configuration.

The Titan Fuel Tanks 7010320 XXL 60-Gallon Mid-Ship Replacement Fuel Tank significantly increases your vehicle's range, reducing refueling stops during long-distance towing or remote travel. This extra-capacity tank replaces the smaller factory unit and is engineered with an exclusive low fuel trap design, ensuring all 60 gallons are fully usable capacity. Despite the massive volume, the tank maintains a clean profile, hanging only approximately 2 inches lower than the bottom of the stock tank.

Constructed from military-grade, cross-linked polyethylene (XLHDPE), this tank is at least 1/4" thick and built to withstand harsh road conditions. The XLHDPE material is nearly 200 times less heat and cold conductive than traditional metal tanks, which virtually eliminates condensation and corrosion issues. It comes complete with a black-coated, galvanized steel mounting strap and front support system for a secure, bolt-on installation using the exclusive TITAN sending unit mounting system.

• Manufacturer Part Number: 7010320
• Capacity: 60 Gallons (Usable)
• Material: Military-grade Cross-Linked Polyethylene (XLHDPE)
• Wall Thickness: 0.25" (1/4") minimum
• Compatibility: Compatible with most bio-diesel fuels
• Construction: No condensation, no corrosion, and high impact resistance
• Included Hardware: Black-coated galvanized steel straps and front support system
• Warranty: Manufacturer Lifetime Warranty

Fits 2020-2025 Chevrolet Silverado and GMC Sierra 2500 HD/3500 HD models equipped with the Duramax engine and a Crew Cab Short Bed configuration.

The Titan Fuel Tanks 7010220 XXL Mid-Ship Replacement Fuel Tank nearly doubles the factory fuel capacity, providing 56 gallons of usable diesel volume. Engineered for long-haul performance, this tank is constructed from 1/4-inch thick, military-grade cross-linked polyethylene (XLHDPE). This advanced polymer is roughly 1/3 the weight of steel, non-corrosive, and significantly less conductive than metal or aluminum, which helps reduce condensation and maintain fuel temperature stability.

This mid-ship tank features an exclusive low-fuel trap design to ensure all 56 gallons are usable capacity. The seamless, one-piece construction eliminates weld failures, while the black-coated, galvanized steel mounting straps provide a secure, factory-style fitment with minimal hang-down, extending only approximately 2.5 inches below the stock fuel tank shield.

• Manufacturer Part Number: 7010220
• Usable Capacity: 56 Gallons
• Material: Military-grade cross-linked polyethylene (XLHDPE)
• Wall Thickness: Minimum 0.25"
• Mounting: Black-coated galvanized steel straps included
• Compatibility: Diesel fuel only; compatible with most bio-diesel blends
• Origin: Made in the USA

Fits 2001-2010 Chevrolet Silverado and GMC Sierra 2500 HD / 3500 HD pickups (Crew Cab, Short Bed, Duramax Diesel).

Extend your driving range and reduce fuel stops with the Titan XXL 52 Gallon Mid-Ship Replacement Fuel Tank. This extra-capacity tank nearly doubles the fuel storage of your stock setup, providing 52 gallons of usable capacity thanks to its exclusive low fuel trap design. Engineered for the 2001-2010 GM 2500 and 3500 platforms, this tank is a direct-replacement solution that fits in the factory mid-ship location.

Constructed from military-grade, cross-linked polyethylene (XLHDPE) with a minimum wall thickness of 1/4 inch, this tank is significantly tougher than OE steel or aluminum units. The polymer construction is 1/3 the weight of steel, naturally resists corrosion and condensation, and is significantly less conductive to heat and cold, ensuring more stable fuel temperatures. This one-piece, seamless tank is manufactured without welds to eliminate potential leak points and is compatible with most bio-diesel blends.

• Manufacturer Part Number: 7010201
• Capacity: 52 Gallons (Usable)
• Material: Military-Grade Cross-Linked Polymer (XLHDPE)
• Includes: Black-coated galvanized steel mounting straps and front support system
• Weight: 1/3 the weight of equivalent steel tanks
• Features: Exclusive TITAN sending unit mounting system
• Origin: Made in the U.S.A.
• Warranty: 5-Year Limited Warranty

Fits select 1978-2019 Chevrolet, GMC, Dodge, Ford, Nissan, Mazda, and Mitsubishi pickups (Diesel fuel only).

Extend your vehicle's driving range with the Titan Fuel Tanks Travel Trekker, a 50-gallon auxiliary fuel system engineered for extreme durability and ease of use. This system is manufactured from military-grade, cross-linked polymer (XLPE), which is significantly tougher than steel and more resilient than aluminum. The Travel Trekker is designed to withstand harsh environments; it is routinely tested via physical 30-foot drop tests onto steel plates and features a baffled interior to minimize fuel sloshing during transit.

The system includes the Titan Electronic Controller, allowing for one-touch fuel transfers from the auxiliary tank to your vehicle's primary tank. The controller monitors fuel levels in real-time and automatically stops the pump when necessary, requiring no cutting into the factory wiring harness. This 50-gallon tank is compact enough to fit in most full-sized pickup beds without interfering with in-bed hitches or most tonneau covers.

• Capacity: 50 Gallons
• Material: Military-grade cross-linked polymer (XLPE)
• Safety: Meets DOT FMCSA Title 49 requirements
• Installation: Includes electronic controller, pump, and all necessary hardware
• Mounting: Baffled design with top-draw pump for enhanced safety
• Compatibility: For diesel fuel only
• Shipping Weight: 70 lbs
• Manufacturer Part Number: 5410050
• Warranty: Lifetime Warranty

This refueling kit is engineered specifically for vehicles equipped with Radium Engineering FCST-X fuel cells. It provides a reliable solution for remote-mounting the fuel filler, making it ideal for race cars and custom builds where the fuel cell is positioned away from the exterior body panels.

The kit features a standard screw-off filler cap and an angled fill neck designed for efficient flow during refueling. The included high-quality 1.5-inch diameter fill hose provides 3 feet of reach, allowing for flexible mounting configurations to suit various chassis requirements. An 8AN vent line is also included to ensure proper tank ventilation and prevent pressure buildup during fill-ups.

• Designed for Radium Engineering FCST-X equipped fuel cells
• Standard screw-off filler cap for secure sealing
• 1.5" ID x 3ft reinforced fill hose
• Angled fill neck for improved hose routing
• Includes 8AN vent line and necessary hardware
• Manufacturer Part Number: 20-0841-22

The Radium Engineering Extension Kit (MPN 20-1989) is designed to increase the internal volume of the Radium Fuel Cell Surge Tank (FCST-X). This 3.7-inch CNC machined aluminum extension adds 1.2L of fuel capacity, providing a larger reservoir for high-demand fueling systems and improved protection against fuel starvation.

• Precision CNC machined aluminum construction for a leak-free seal
• Adds 3.7 inches of height to the FCST-X assembly
• Increases surge tank capacity by 1.2L
• Compatible with deep fuel cells (requires minimum 12-inch internal depth)
• Manufacturer Part Number: 20-1989

Ideal for performance builds utilizing deep fuel cells, this extension kit allows you to maximize the efficiency of your Radium surge tank setup. Professional installation is recommended to ensure proper fitment within the fuel cell.

The Radium Engineering Spare Tire Well Fuel Cell Installation Kit (20-0931) provides a secure, professional mounting solution for circular fuel cells designed to reside in a vehicle's factory spare tire well. This kit simplifies the conversion process by providing dedicated mounting points and hardware, eliminating the need for complex custom fabrication when upgrading a fuel system for racing or high-performance applications.

Built to withstand the rigors of track use, the bracketry ensures the fuel cell remains firmly anchored during high-G maneuvers. The low-profile design is engineered to work with the specific geometry of circular cells, ensuring a stable foundation while maximizing trunk space and keeping the fuel weight centered and low in the chassis.

• Manufacturer Part Number: 20-0931
• Optimized for circular spare tire well fuel cells
• Includes heavy-duty mounting brackets and corrosion-resistant hardware
• Provides a secure, bolt-in mounting foundation
• Designed for track-tested durability and stability

The Radium Engineering Fuel Cell Weld-In Cage (20-0922) provides a robust, permanent mounting solution for 22-gallon Radium fuel cells. Fabricated from stainless steel for maximum corrosion resistance and strength, this cage is designed to be welded directly into a vehicle's chassis or trunk structure to ensure the fuel system remains secure under racing conditions.

• Specifically engineered for Radium Engineering 22-gallon fuel cells
• Stainless steel construction prevents rust and ensures structural integrity
• Weld-in design allows for precise, low-profile chassis integration
• Provides a rigid foundation for high-performance or off-road fuel delivery systems
• Manufacturer Part Number: 20-0922

The Radium Engineering weld-in cage provides a secure, professional mounting solution for 14-gallon Radium RA-series fuel cells. Engineered for custom chassis integration, this cage ensures the fuel cell remains rigidly positioned under high-G loads while simplifying the fabrication process.

Constructed from high-quality stainless steel with a polished finish, this cage is built to resist corrosion and provide a clean, show-quality appearance. The modular bolt-together design allows for easier assembly and maintenance, providing a more versatile solution than a permanent, fully welded enclosure.

• Designed specifically for Radium Engineering 14 Gallon RA-Series Fuel Cells
• High-grade stainless steel construction for durability and corrosion resistance
• Polished finish for a clean, professional aesthetic
• Modular bolt-together design simplifies installation and cell removal
• Weld-in tabs for secure attachment to vehicle chassis or cage work
• Manufacturer Part Number: 20-0914

The Radium Engineering Fuel Cell Weld-In Cage provides a robust and secure mounting solution specifically engineered for RA-series 10-gallon fuel cells. This multi-piece assembly is designed to be integrated directly into a custom vehicle chassis or trunk floor, ensuring the fuel cell remains stable and supported under high-G racing conditions.

• Designed specifically for Radium RA-series 10-gallon fuel cells
• 100% stainless steel construction for superior durability and corrosion resistance
• Multi-piece design facilitates precise fitment and ease of installation for fabricators
• Manufacturer Part Number: 20-0910

The Radium Engineering weld-in cage (MPN 20-0906) provides a professional, high-strength mounting solution for 6-gallon Radium RA-series fuel cells. Designed for motorsport applications, this cage allows you to securely anchor the fuel cell directly to the vehicle chassis or fuel compartment, ensuring stability under extreme racing conditions.

• Specifically engineered for 6-gallon Radium RA-series fuel cells
• High-grade stainless steel construction for superior corrosion resistance
• Polished finish for a clean, professional appearance
• Bolt-together design simplifies fuel cell installation and future maintenance
• Weld-in architecture provides maximum structural rigidity
• Manufacturer Part Number: 20-0906

Streamline your fuel system configuration with the Radium Engineering FCST-X Direct Mount Refueling Kit. Designed specifically for fuel cells equipped with the Radium FCST-X (Fuel Cell Surge Tank), this kit replaces remote filler neck setups with a compact, tank-mounted solution that bolts directly to the surge tank assembly.

• Precision Fitment: Engineered to integrate seamlessly with Radium Engineering FCST-X equipped fuel cells.
• Standard Fill Neck: Features a secure, knurled screw-off cap for easy refueling access without the need for additional hoses.
• Integrated Venting: Includes a dedicated -8AN (8AN) male flare vent fitting to ensure proper tank pressure equalization during high-flow filling.
• Durable Construction: Manufactured with high-grade materials to withstand various fuel types and track conditions.

This kit is essential for racers and builders looking to simplify their fuel cell plumbing while maintaining a high level of safety and reliability. Manufacturer Part Number: 20-0841-20.

The Radium Engineering FCST-X Complete Refueling Kit (20-0841-02) is a comprehensive solution for vehicles equipped with FCST-X fuel cells that require a remote-mounted fill point. This system allows for easier refueling access by relocating the filler neck away from the cell, utilizing high-quality components designed for the rigors of performance and racing environments.

• Complete System: Specifically engineered for Radium Engineering FCST-X equipped fuel cells.
• Fill Hose: Includes a 1.5-inch diameter, 3-foot length fuel-resistant fill hose for flexible routing.
• Refueling Hardware: Features a remote-mounted filler with a secure screw-off cap and an angled fill neck.
• Ventilation: Comes with an 8AN vent line to ensure efficient air displacement during high-speed filling.
• Included Equipment: Includes a dedicated dump can featuring a standard filler spout.
• Manufacturer Part Number: 20-0841-02

The Radium Engineering R22A is a 22-gallon rectangular fuel cell engineered for high-performance applications where safety and capacity are paramount. This fuel cell is both FIA and SFI certified, ensuring it meets the rigorous standards required for competitive racing and track use. Its internal bladder and construction are designed to resist degradation and maintain structural integrity under extreme conditions.

• Capacity: 22 Gallons
• Certification: FIA and SFI Certified
• Compatibility: Safe for use with all automotive fuels including gasoline, diesel, methanol, and ethanol blends
• Form Factor: Rectangular design for versatile mounting
• Manufacturer Part Number: 20-0622