Fits 2000-2005 Toyota Celica GT and GTS models.

The Prothane Total Kit provides a comprehensive suspension overhaul by replacing soft factory rubber bushings with high-performance polyurethane components. These red polyurethane bushings are engineered to maintain precise suspension geometry under load, significantly reducing deflection for improved steering response and cornering stability. Unlike OEM rubber, these components are resistant to road salts, oil, and environmental degradation, ensuring long-term durability and consistent performance.

• Complete master bushing set for a full suspension refresh
• High-grade red polyurethane construction for maximum longevity
• Maintains better alignment and reduces chassis flex
• Resistant to automotive fluids and ozone rot
• Direct fitment for 2000-2005 Toyota Celica (T230) chassis

Fits 1985-1998 Volkswagen Golf and Jetta.

Restore steering precision and suspension geometry to your chassis with the Prothane 22-2009 Total Kit. Over time, factory rubber bushings become soft, crack, and deflect under load, leading to vague handling and poor alignment retention. This comprehensive polyurethane bushing set replaces those worn OE components with high-durometer polyurethane, providing the rigidity needed for predictable handling and sharper response during cornering or braking.

• High-performance polyurethane construction for superior durability
• Maintains consistent alignment and reduces wheel hop
• Resistant to road chemicals, oils, and environmental degradation
• Replaces critical suspension and chassis bushings
• Vibrant red finish
• Manufacturer Part Number: 22-2009

Fits 2000-2005 Toyota Celica GT and GTS models.

The Energy Suspension Hyper-Flex Master Bushing Set replaces soft, prone-to-failure factory rubber bushings with high-performance polyurethane to restore and improve your vehicle's handling characteristics. Over time, original rubber bushings compress, crack, and rot, leading to vague steering response, erratic alignment changes, and significant wheel hop during hard acceleration. This comprehensive kit (MPN 8.18106G) restores suspension precision by maintaining proper caster and camber settings even under heavy cornering or braking loads.

Hyper-Flex polyurethane is engineered to withstand the harshest undercar environments, resisting degradation from road oils, coolants, and UV exposure that typically destroys rubber in just a few years. By providing a more stable mounting point for suspension components, this set improves braking control and overall chassis predictability. These components are designed to outlast traditional rubber counterparts by a 5-to-1 margin while providing a more connected feel to the road.

• Significantly reduces wheel hop during quick acceleration
• Maintains consistent caster and camber alignment for improved tire wear and grip
• Highly resistant to oils, chemicals, and atmospheric pollutants
• Black finish for a clean, professional appearance
• Proudly Made in the USA
• Manufacturer Part Number: 8.18106G

Fits 1990-1993 Acura Integra (GS, GS-R, LS, RS).

The Energy Suspension Hyper-Flex Master Bushing Set (16.18104G) is a comprehensive solution to restore and upgrade your vehicle's suspension response. Factory rubber bushings are prone to cracking and deterioration over time, leading to imprecise handling and alignment shifts. These Hyper-Flex polyurethane components provide the durability to withstand undercar chemicals, oils, and UV exposure while maintaining the necessary rigidity for performance driving.

By replacing soft OE bushings, this kit significantly reduces wheel hop during hard acceleration and maintains precise caster and camber alignment during heavy cornering. Whether for the track or the street, these American-made bushings provide a level of stability and braking control that standard rubber cannot match, outlasting traditional components up to five to one.

• Part Number: 16.18104G
• Material: High-Performance Hyper-Flex Polyurethane
• Finish: Black
• Greatly reduces wheel hop on quick acceleration
• Maintains proper caster and camber alignment
• Impervious to oils, coolants, and atmospheric pollutants
• Proudly Made in America

Fits select 2010-2024 Lexus GX460 and Toyota 4Runner, FJ Cruiser, and Tacoma.

Control arm bushings serve as the critical pivot points between your vehicle's core suspension components. Factory rubber bushings are prone to softening and perishing over time, which leads to excessive deflection, vague steering response, and accelerated tire wear. This degradation is often worsened in trucks and SUVs equipped with heavy off-road accessories or oversized wheels and tires. SuperPro polyurethane bushings are engineered to eliminate this "sloppy" feel while maintaining factory levels of noise, vibration, and harshness (NVH) isolation.

Developed and tested in the Australian Outback, these bushings provide a durable, high-performance alternative to standard rubber. They are specifically formulated to remain unaffected by extreme temperatures, oils, and road contaminants, ensuring your suspension geometry remains consistent during daily driving or technical trail maneuvers.

• Proprietary engineering-grade polyurethane formula for superior durability and longevity
• Reduces suspension deflection for sharper handling and better alignment retention
• Engineered and manufactured in Australia for harsh environments
• Unaffected by oils, water, coolant, and extreme temperature cycles
• Position: Front Lower Control Arm (Inner Fore & Aft)
• Lifetime Warranty

Fits select 2006-2021 Lexus GS300, GS350, GS430, GS460, IS200t, IS250, IS300, and IS350 models (AWD).

Control arm bushings are the critical pivot points connecting your suspension components. Over time, factory rubber bushings perish, leading to excessive deflection, vague steering response, and uneven tire wear. The SuperPro SPF5313K kit replaces the front lower control arm inner forward bushings with a proprietary engineering-grade polyurethane formula designed to restore chassis precision while maintaining cabin comfort.

Engineered and manufactured in Australia, these bushings are built to withstand harsh environments. They offer a superior alternative to rubber by providing consistent suspension geometry under load without the noise and vibration often associated with inferior polyurethane brands. This kit is ideal for daily-driven vehicles and those with upgraded wheel and brake packages that put additional stress on the factory suspension.

• Replaces soft or worn front lower control arm inner forward bushings
• Proprietary SuperPro polyurethane formula for durability and performance
• Resistant to extreme temperatures, oils, water, and coolant
• Maintains OEM levels of NVH (Noise, Vibration, Harshness) isolation
• Designed and manufactured in Australia
• Manufacturer Part Number: SPF5313K
• Limited Lifetime Warranty

Fits select 2018-2026 Jeep Wrangler and Wrangler Unlimited models, including Rubicon, Sahara, Sport, and 4xe variants.

While the Jeep Wrangler JL improved on-road comfort over previous generations, the factory rubber bushings in the control arms and Panhard rods remain a performance bottleneck. These high-compliance OE components often degrade rapidly, especially when subjected to off-road stress or the increased leverage of larger wheel and tire packages. The SuperPro Vehicle Master Bushing Kit (KIT252K) provides a comprehensive suspension overhaul, replacing soft factory units with maintenance-free bushings designed for lifetime durability.

By significantly reducing bushing deflection, this kit ensures your Jeep tracks straighter on the highway and maintains more accurate steering geometry on the trail. SuperPro engineers these bushings to facilitate high levels of articulation while mitigating road and tire noise, ensuring no compromise between off-road capability and daily drivability.

• Precision Handling: Eliminates vague steering by minimizing movement in leading and trailing arms.
• Complete Kit: Replaces critical bushings for front/rear control arms and front/rear track rods.
• Maintenance-Free: Engineered for silent operation without the need for periodic lubrication.
• Extreme Durability: Backed by a manufacturer lifetime warranty.
• MPN: KIT252K

Kit Includes:

• SPF3655K - Front Leading Arm Lower Bush Kit
• SPF3751K - Front Leading Arm Upper Front Bush Kit
• SPF3654K - Front Leading Arm Upper Rear Bush Kit
• SPF3661K - Trailing Arm Lower Bush Kit
• SPF3660K - Trailing Arm Upper Bush Kit
• SPF5575K - Rear Panhard Rod Bush Kit
• SPF5581K - Front Panhard Rod To Diff Mount Bush Kit

Fits 2003-2009 Nissan 350Z and 2003-2007 Infiniti G35.

The Energy Suspension Hyper-Flex Master Bushing Set (7.18108G) is a comprehensive performance upgrade designed to replace soft, factory rubber bushings with high-performance polyurethane. Unlike OEM rubber that degrades under the stress of spirited driving or exposure to undercar chemicals, Hyper-Flex polyurethane is impervious to oils, coolants, and UV radiation. This set restores suspension geometry, providing a significant increase in handling precision and chassis stability.

• Greatly reduces wheel hop during quick acceleration
• Maintains proper caster and camber alignment for improved tire wear and grip
• Provides a notable increase in control during braking and cornering
• Superior durability—engineered to outlast traditional rubber 5 to 1
• Chemically resistant to road salts, pollutants, and automotive fluids
• Proudly made in the USA

Manufacturer Part Number: 7.18108G

Fits 1995-1999 Mitsubishi Eclipse models including Base, GS, GST, GSX, RS, and Spyder (FWD and AWD).

The Energy Suspension Hyper-Flex Master Bushing Set (5.18107G) replaces soft, prone-to-fail factory rubber bushings with high-performance polyurethane components. Engineered for the 1995-1999 Mitsubishi Eclipse, this comprehensive kit addresses the common issue of bushing deflection, which leads to unpredictable handling and alignment shifts. Unlike original equipment rubber, Hyper-Flex polyurethane is impervious to undercar contaminants such as engine oil, coolant, and road salt, and it will not rot or deteriorate from UV exposure.

Installing this master set provides a significant upgrade in chassis rigidity and steering response. By maintaining proper caster and camber alignment during hard cornering and braking, these bushings ensure a more stable contact patch. The increased material density also helps to significantly reduce wheel hop during rapid acceleration, making it an essential upgrade for both FWD and GSX AWD platforms.

• Replaces soft factory rubber with durable Hyper-Flex polyurethane
• Maintains critical alignment settings (Caster and Camber)
• Reduces wheel hop and improves traction during acceleration
• Resistant to oils, coolants, and atmospheric pollutants
• Proudly Made in the USA
• Manufacturer Part Number: 5.18107G
• Finish: Black

Fits 2003-2005 Mitsubishi Lancer Evolution, including MR and RS submodels.

Replace soft, compliant factory rubber with the Energy Suspension Hyper-Flex Master Bushing Set to restore and improve the handling of your Mitsubishi Lancer Evolution. These performance polyurethane bushings are engineered to maintain critical caster and camber alignment during high-load cornering and heavy braking. By eliminating the excessive deflection common in aged OE rubber, this kit significantly reduces wheel hop during hard acceleration and provides a more stable, predictable suspension feel.

Energy Suspension’s Hyper-Flex material is formulated to be impervious to undercar contaminants including oils, coolants, and road salt, as well as UV exposure and atmospheric pollutants. These components are designed to outlast traditional rubber bushings by a factor of 5 to 1, making them a cost-effective solution for both street performance and track-day reliability.

• Manufacturer Part Number: 5.18115G
• High-performance Hyper-Flex polyurethane construction
• Maintains proper alignment geometry under stress
• Reduces wheel hop and improves traction
• Resistant to oils, chemicals, and environmental degradation
• Black finish for a discrete, professional appearance
• Proudly Made in America

Fits 1973-1980 Chevrolet C10 and GMC C15/C1500 2WD 1/2-ton pickups. This Energy Suspension Hyper-Flex Master Bushing Set (MPN: 3.18109G) replaces worn-out, soft rubber OE bushings with high-performance polyurethane to restore chassis stiffness and handling precision.

Energy Suspension's proprietary Hyper-Flex polyurethane formula is engineered to withstand the most demanding conditions, from street performance to off-road use. Unlike factory rubber, these components are impervious to undercar chemicals, oils, coolants, and UV exposure, ensuring they will not rot or deteriorate over time. This kit is designed to maintain proper caster and camber alignment during hard cornering and significantly reduce wheel hop during rapid acceleration.

• Increases suspension stability and overall vehicle control
• Maintains critical alignment settings under load
• Resistant to road salt, oils, and atmospheric pollutants
• Black polyurethane finish
• Proudly Made in the USA
• Includes essential bushings for a comprehensive suspension refresh

By upgrading to the 3.18109G Master Set, you ensure more consistent braking performance and a more connected feel between the driver and the road, providing a cost-effective performance improvement that outlasts rubber 5 to 1.

Fits 2002-2005 Honda Civic Si.

The Energy Suspension Hyper-Flex Master Bushing Set (16.18112G) replaces soft, degraded factory rubber bushings with high-durometer polyurethane to restore and enhance your vehicle's handling characteristics. Unlike OEM rubber that cracks and rots from oil, road salt, and UV exposure, these Hyper-Flex components are chemically resistant and designed to maintain precise suspension geometry under heavy loads.

Installing this comprehensive kit significantly reduces wheel hop during hard acceleration and maintains consistent caster and camber alignment for predictable cornering. Whether for track use or daily driving, this set provides a more stable suspension platform and improved braking feedback.

• Manufacturer Part Number: 16.18112G
• Material: Proprietary Hyper-Flex Polyurethane
• Color: Black
• Improves suspension stability and alignment retention
• Resistant to vehicle fluids, road salt, and ozone
• Reduces wheel hop and improves braking control
• Proudly Made in the USA

Fits 1984-1987 Pontiac Fiero (Base, GT, SE, Sport, and Value Leader).

Restore steering precision and suspension geometry with the Prothane Total Kit. This comprehensive polyurethane bushing set is designed to replace soft, worn-out factory rubber components that degrade over time, leading to alignment shift and vague handling. By upgrading to high-quality polyurethane, you significantly reduce deflection, ensuring your Fiero maintains a consistent contact patch during spirited driving and daily commuting.

Each component in the 7-2034 kit is precision-molded for an exact fit and finished in a vibrant red. Unlike traditional rubber, these polyurethane bushings are resistant to engine oils, road salt, and ozone, providing a much longer service life and more predictable chassis feedback. This "Total Kit" approach simplifies the restoration process by providing a complete set of bushings to refresh your vehicle's critical suspension points in one package.

• Replaces compliant factory rubber with durable polyurethane
• Improves steering response and cornering stability
• Resistant to oils, grease, and environmental contaminants
• Finish: Red
• Manufacturer Part Number: 7-2034

Fits 1997-2004 Chevrolet Corvette (Base, 50th Anniversary Edition, and Pace Car models).

The Prothane 7-2014 Total Kit is a comprehensive suspension overhaul designed to replace soft, perishing factory rubber bushings with high-performance polyurethane. Over time, OEM rubber components deflect under load, leading to alignment shifts and imprecise handling. This kit provides the necessary rigidity to maintain suspension geometry, resulting in sharper steering response and improved chassis control.

• Replaces worn OE bushings to restore and improve handling characteristics
• High-performance polyurethane construction resistant to oils, road salt, and ozone
• Maintains precise alignment for more predictable cornering and better tire wear
• Complete kit engineered specifically for the C5 Corvette chassis
• Vibrant red finish for a performance appearance
• Manufacturer Part Number: 7-2014

Fits 1989-1994 Toyota Pickup 2WD (Base, DLX, SR5).

Restore the handling and steering precision of your truck with the Prothane Total Kit (18-2004). Factory suspension bushings are typically made of soft rubber that degrades over time when exposed to road salt, oils, and ozone, leading to sloppy steering and inconsistent alignment. This comprehensive kit replaces those worn OE components with high-durometer polyurethane, which is far more resistant to environmental contaminants and mechanical stress.

By maintaining proper suspension geometry, these bushings improve chassis feedback and reduce wheel hop during acceleration. This is a direct-fit solution engineered to bolt into the factory mounting points, making it a critical upgrade for any 1989-1994 2WD Toyota Pickup restoration or performance build.

• Manufacturer Part Number: 18-2004
• Material: Precision-molded polyurethane
• Finish: Red
• Application: Full vehicle bushing set for 2WD models
• Resistant to oils, road chemicals, and atmospheric rot

Fits 1990-1997 Mazda Miata (Base, LE, M Edition, SE, and STO).

The Prothane Total Kit is a comprehensive suspension solution designed to replace soft, aged factory rubber bushings with high-performance polyurethane. By significantly reducing component deflection under load, this kit helps maintain consistent suspension geometry and alignment during aggressive cornering, braking, and acceleration. This results in sharper steering response and a more connected feel to the road.

Constructed from Prothane’s specialized polyurethane formula, these bushings are engineered to withstand the rigors of both daily driving and track use. Unlike OEM rubber, this material is resistant to degradation from automotive fluids, road salts, and environmental debris, ensuring long-term durability and performance stability.

• Complete suspension bushing overhaul for improved chassis rigidity
• Precision-engineered for a direct fit into factory locations
• Black polyurethane finish for a clean, OE-style appearance
• Includes high-quality lubricant for installation
• Manufacturer Part Number: 12-2002-BL

Fits 2011-2020 Mazda BT-50 (UP/UR) models.

The SuperPro TRC561 Front Lower Control Arm Set provides a comprehensive repair and performance upgrade for your vehicle's front suspension. This kit replaces worn factory arms with two complete, heavy-duty assemblies designed to restore steering precision and enhance vehicle stability. Each arm comes ready for installation with advanced SuperPro polyurethane bushings pre-installed, significantly reducing deflection and maintaining alignment geometry under load.

Engineered and tested in Australia, these arms are built to withstand both daily driving and demanding track or off-road conditions. The inclusion of up-rated, high-quality ball joints ensures long-term durability and smoother suspension articulation compared to standard OE replacements.

• Complete set including left and right front lower control arms
• Pre-installed advanced SuperPro bushings for improved control
• Up-rated heavy-duty ball joints included
• Direct-fit replacement for factory components
• Engineered and tested in Australia
• Manufacturer Part Number: TRC561
• Backed by a Limited Lifetime Warranty

Fits select 2007-2023 Lexus GX460 and Toyota FJ Cruiser models.

The SuperPro SPF4059-25K Sway Bar Mount Bushing Kit replaces soft, worn-out factory rubber bushings with high-performance polyurethane. These 25mm bushings are engineered specifically to integrate with your vehicle's original mounting hardware, restoring body control and eliminating the loose, sloppy handling caused by degraded OE components.

Designed for maximum longevity, these bushings feature advanced grease retention technology to ensure quiet, smooth operation for the life of the vehicle. Unlike universal "one-size-fits-all" alternatives, these are precision-molded to fit the factory suspension design perfectly, turning a frequent maintenance item into a permanent upgrade.

• Includes 25mm sway bar mount bushings (Pair)
• Advanced internal grease retention grooves for noise-free performance
• High-durability polyurethane construction resistant to oil and road grime
• Direct replacement for OEM rubber bushings using factory hardware
• Restores steering response and reduces body roll
• Manufacturer Part Number: SPF4059-25K

Fits 2011-2021 Dodge Durango and Jeep Grand Cherokee models.

The rear subframe serves as the critical junction between your vehicle's suspension and the chassis. Factory manufacturers often use soft, heavily-voided rubber bushings in this location to prioritize passenger isolation. Over time, these OEM bushings degrade, leading to excessive suspension movement that negatively impacts traction, handling, and throttle response. In high-performance applications, this movement often manifests as wheel hop during hard acceleration or gear changes.

The SuperPro SPF5392K Rear Subframe Mount Bushing Kit replaces these compromised components with high-grade synthetic elastomer. This material is engineered to provide superior control and durability without the harshness typically associated with aftermarket bushings. By stabilizing the subframe, this kit restores predictable handling and ensures power is efficiently transferred to the ground, all while maintaining OEM levels of cabin isolation.

• Direct replacement for soft or aged factory rubber subframe bushings
• Engineered to reduce wheel hop and suspension deflection under load
• Proprietary synthetic elastomer material resists oils and environmental degradation
• Maintains consistent performance over the life of the vehicle without hardening
• Manufacturer Part Number: SPF5392K

Fits 2003-2007 Honda Accord and 2004-2008 Acura TSX.

The SuperPro KIT155K is a comprehensive front and rear suspension bushing kit designed to restore and enhance your vehicle's handling characteristics. This kit replaces aging or failed original equipment rubber bushings with high-performance polyurethane components, offering improved steering precision and stability without sacrificing ride quality. Engineered to maintain alignment geometry under heavy cornering loads, these bushings are a direct solution for eliminating suspension play and inconsistent tire wear.

• Complete front and rear vehicle kit for a total suspension refresh
• Proprietary polyurethane material for superior durability and shape memory
• Resistant to oils, coolants, and environmental contaminants
• Directly replaces multiple OE pivot points to tighten chassis response
• Includes all necessary bushings to service both front and rear sections
• Manufacturer Part Number: KIT155K

Fits select 2004-2013 Mazda 3 models, including i, S, Mazdaspeed, and SP23.

The SuperPro KIT172K Rear Suspension Enhancement Bushing Kit is engineered to replace soft or deteriorated factory rubber bushings, providing a significant upgrade in handling and vehicle stability. These bushings are designed to maintain consistent suspension geometry under load, reducing unwanted movement and improving driver feedback without the harshness often associated with performance upgrades. This kit is a direct solution for restoring steering precision and ensuring long-lasting suspension performance.

• Direct replacement for worn OE rear suspension bushings
• Improves chassis stability and handling characteristics
• Engineered materials designed for durability and resistance to environmental degradation
• Maintains consistent alignment settings for improved tire life
• Manufacturer Part Number: KIT172K
• Position: Rear

Fits select 1999-2005 Mazda Miata models, including Base, LS, SE, Shinsen, 10th Anniversary, and Mazdaspeed.

The SuperPro KIT132NBK is a comprehensive alignment-adjustable suspension bushing kit engineered specifically for the NB-generation Miata. This kit replaces compliant, worn-out factory rubber with high-performance polyurethane bushings designed to enhance steering response and chassis feedback. Unlike standard replacement kits, the KIT132NBK utilizes a strategic combination of standard and double-offset bushings, allowing for precise adjustment of front camber and caster, as well as rear camber.

By upgrading to this kit, you gain the ability to dial in an aggressive alignment for the track or correct geometry on lowered street cars. These bushings are designed for a significantly longer service life than OE components while maintaining superior control over suspension geometry under load.

• Manufacturer Part Number: KIT132NBK
• Front Control Arm Lower-Inner Front Bush Kit (Double Offset)
• Front Control Arm Lower-Inner Rear Bush Kit (Double Offset)
• Front Control Arm Upper-Inner Bush Kit
• Rear Control Arm Lower-Inner Bush Kit (Double Offset)
• Rear Control Arm Lower-Outer Bush Kit
• Rear Control Arm Upper-Inner and Outer Bush Kit

Fits 1975-1984 Volkswagen Rabbit, Jetta, and Rabbit Convertible.

The Prothane 22-2008 Total Kit is a comprehensive bushing solution designed to restore and enhance the suspension performance of your A1-chassis Volkswagen. By replacing soft, deteriorated factory rubber with high-performance red polyurethane, this kit significantly reduces unwanted deflection in the suspension geometry. This results in more precise steering response, improved cornering stability, and a more connected feel to the road.

• Part Number: 22-2008
• Color: Red
• Material: High-durometer polyurethane
• Complete bushing set for major suspension and chassis points
• Resistant to road oils, salts, and environmental wear
• Designed to replace worn OE (Original Equipment) components

Fits 2009-2010 Subaru Forester (X and XT models). This Prothane Total Kit provides a comprehensive suspension overhaul by replacing soft, original equipment rubber bushings with high-performance polyurethane components.

Over time, factory rubber bushings perish and deflect under load, leading to vague steering response, alignment shifts, and sloppy handling. The 16-2005 Total Kit restores chassis rigidity and improves road feel without the harshness of a solid metal spherical bearing. Each component is precision-molded for an exact fit and engineered to resist oil, road salt, and environmental degradation that typically destroys rubber.

• Replaces compliant factory rubber with durable, red polyurethane
• Improves steering precision and maintains consistent suspension geometry
• Designed for long-term durability in harsh driving conditions
• Includes necessary bushings for major front and rear suspension points
• Manufacturer Part Number: 16-2005

Fits 1990-1993 Honda Accord models across all trims including DX, EX, LX, SE, and 10th Anniversary.

The Energy Suspension Hyper-Flex Master Bushing Set (16.18108G) provides a comprehensive upgrade to your vehicle's suspension geometry. Over time, original equipment rubber bushings become soft and deteriorate, leading to vague steering response, alignment drift, and excessive wheel hop. This master kit replaces those high-compliance components with performance-grade polyurethane, which is engineered to outlast rubber 5 to 1.

Hyper-Flex components are chemically resistant to oils, coolants, and road salt, and they will not dry out or rot from UV exposure. By installing this set, you ensure that your Honda Accord maintains proper caster and camber alignment during aggressive cornering and hard braking, resulting in significantly improved chassis stability and predictable handling.

• Replaces worn OE bushings to greatly reduce wheel hop during acceleration
• Maintains precise suspension geometry for better alignment retention
• Highly resistant to under-car chemicals and atmospheric pollutants
• Black polyurethane finish for a clean, professional look
• Proudly Made in the USA
• Manufacturer Part Number: 16.18108G

Fits all 1986-1991 Mazda RX-7 models including Turbo, GXL, GTU, and Convertible. This Master Bushing Set replaces soft, deteriorated factory rubber with high-performance Hyper-Flex polyurethane to restore chassis precision and improve handling response.

Energy Suspension's Hyper-Flex components are engineered to maintain proper caster and camber alignment during aggressive driving, significantly reducing wheel hop under quick acceleration and improving stability during heavy braking. Unlike OEM rubber, these polyurethane bushings are impervious to undercar chemicals, road oils, and UV exposure, ensuring they will not rot or crack over time.

• Significantly reduces wheel hop and suspension deflection
• Maintains consistent alignment settings for better tire contact
• Hyper-Flex polyurethane outlasts standard rubber 5 to 1
• Resistant to oils, coolants, and atmospheric pollutants
• Made in the USA

• Manufacturer Part Number: 11.18101G
• Material: Hyper-Flex Polyurethane
• Color: Black
• Fitment: 1986-1991 Mazda RX-7 (FC Chassis)

Fits 1997-2004 Chevrolet Corvette (Base, 50th Anniversary Edition, and Indianapolis 500 Pace Car).

The Prothane 7-2014-BL Total Kit is a comprehensive suspension refresh designed to replace worn, soft factory rubber bushings with high-performance polyurethane components. This upgrade significantly reduces suspension deflection and maintains proper alignment geometry during aggressive cornering and high-speed maneuvers. Unlike standard rubber that cracks and rots over time, Prothane's specially formulated polyurethane is resistant to road oils, salts, and environmental contaminants.

• Increases steering precision and overall handling response
• Replaces prone-to-failure factory rubber with high-durometer polyurethane
• Engineered to provide a firmer feel without the excessive harshness of solid metal bearings
• Resistant to automotive fluids and environmental degradation
• Material: Premium Polyurethane
• Color: Black
• Manufacturer Part Number: 7-2014-BL

Fits 2004-2009 Subaru Legacy and Outback models including 2.5i, GT, XT, and H6 variants.

The Prothane 16-2004 Total Kit provides a comprehensive suspension overhaul by replacing soft, high-compliance factory rubber bushings with high-performance polyurethane. This upgrade is engineered to eliminate the deflection and sloppy handling that occurs as OE bushings deteriorate over time. By maintaining precise alignment geometry under load, this kit delivers sharper steering response, improved cornering stability, and increased durability for both daily driving and spirited performance.

• Material: Precision-molded high-performance polyurethane
• Color: Red
• Part Number: 16-2004
• Performance: Resists oil, grease, and road contaminants while providing superior firmness over rubber
• Compatibility: Full vehicle-specific kit for 2004-2009 Subaru chassis

Fits 1966-1977 Ford Bronco 4WD models (Base, Custom, Northland, Ranger, Roadster, Sport, and Wagon).

Replace aging, soft factory rubber with the Energy Suspension Hyper-Flex Master Bushing Set to restore handling precision and suspension stability. This comprehensive kit is engineered for the 1966-1977 Ford Bronco, utilizing a proprietary polyurethane formula that is impervious to undercar chemicals, road salt, and UV exposure. Unlike OE rubber, these components will not rot or deteriorate, ensuring your suspension geometry remains consistent under load.

• Hyper-Flex polyurethane construction outlasts traditional rubber 5 to 1
• Includes 4-degree C-bushings to help maintain proper caster and camber alignment
• Greatly reduces wheel hop during quick acceleration
• Improves braking control and overall vehicle handling
• Resistant to oils, coolants, and atmospheric pollutants
• Proudly Made in the USA
• Manufacturer Part Number: 4.18105G

Fits 1993-2002 Chevrolet Camaro and Pontiac Firebird (Base, RS, Z28, SS, Formula, and Trans Am).

Energy Suspension Hyper-Flex Master Bushing Sets replace soft factory rubber components with high-performance polyurethane to restore handling precision and suspension stability. Designed specifically for the 1993-2002 GM F-Body platform, this comprehensive kit addresses common suspension deflection issues that lead to wheel hop and inconsistent alignment during aggressive driving or hard acceleration.

The Hyper-Flex polyurethane formula is engineered to withstand harsh undercar environments, remaining impervious to oils, coolants, UV exposure, and road pollutants that typically cause OE rubber to rot and fail. This upgrade maintains proper caster and camber alignment while providing a significant improvement in braking control and overall vehicle response. These components are built to outlast traditional rubber 5-to-1, providing a cost-effective performance overhaul.

• Significantly reduces wheel hop during quick acceleration
• Maintains consistent caster and camber alignment for predictable handling
• Resists deterioration from oils, chemicals, and atmospheric conditions
• Improves braking control and suspension stability
• Proudly Made in America
• Color: Black Polyurethane
• Manufacturer Part Number: 3.18130G