Fits select 2020-2026 Jeep Gladiator JT models (including Sport, Mojave, and Rubicon).

DV8 Offroad Fender Deletes are engineered to provide maximum suspension articulation and tire clearance for serious rock crawling. By replacing the bulky factory fenders with a slim, high-clearance profile, these deletes minimize the risk of body damage in tight terrain. The hardware is designed to sit flush within the deletes to maintain a clean, snag-free surface.

Constructed from heavy-duty 3.5mm plate steel, these deletes offer superior protection against trail debris. Each component is finished in a durable micro-texture black powder coat for long-lasting corrosion resistance. To ensure full utility, this kit includes plug-and-play amber LED turn signals that integrate directly into the factory wiring harness without complex modifications.

• Designed to optimize articulation and tire clearance for rock crawling
• Heavy-duty 3.5mm plate steel construction
• Micro-texture black powder coat finish for maximum durability
• Flush-mount mounting hardware included for a clean profile
• Includes plug-and-play amber LED turn signals
• Straightforward bolt-on installation (minimal trimming required)

Fits 2013-2020 Scion FR-S, Subaru BRZ, and Toyota 86.

The GReddy X Rocket Bunny Rear Over-Fender and Rear Bumper Trim set (MPN 17010214) is a specialized widebody component designed to extend the rear quarter panel and integrate seamlessly into the rear bumper. This 2-piece kit is a primary element of the iconic TRA-Kyoto designed widebody conversion, providing the necessary clearance for aggressive, low-offset wheel and tire packages while maintaining the signature Rocket Bunny aerodynamic profile.

• Authentic GReddy X Rocket Bunny widebody component
• Includes rear over-fender and rear bumper trim extension (2 pieces total)
• Precision-molded for the ZN6/ZC6 chassis (FR-S, BRZ, 86)
• Designed for widebody conversion and wheel arch extension
• Manufacturer Part Number: 17010214

Fits all 2021-2024 Ford Bronco models.

Engineered for the modern off-road enthusiast, these Turn Offroad fender flares (MPN: FD2-M1) provide essential body protection and increased tire clearance for the 2021-2024 Ford Bronco. These flares are designed to follow the vehicle's specific body lines while offering a more aggressive profile suited for larger wheel and tire packages. By replacing the bulky factory flares, this kit improves articulation space and helps shield the side panels from trail debris and gravel spray.

• Direct fit for 2021-2024 Ford Bronco
• Designed to maximize tire clearance during suspension compression
• Streamlined profile provides a rugged, off-road aesthetic
• Uses secure mounting points for a stable installation
• Manufacturer Part Number: FD2-M1

Fits select 2018-2025 Jeep Wrangler JL and 2020-2022 Jeep Gladiator JT models.

Rugged Ridge Max-Terrain Fender Flares combine the iconic flat-fender look of early vintage Jeeps with the modern profile of the JL factory flare. Designed to increase tire clearance for improved off-road articulation, these flares are built from durable, injection-molded ABS plastic that withstands trail impacts and environmental exposure. The unique dual-textured finish provides a rugged aesthetic that can be left as-is or prepped and painted for a custom color-matched look.

• Manufacturer Part Number: 11640.51
• Material: UV-treated ABS plastic
• Finish: Dual textured, paintable surface
• Installation: Minor drilling required for secure fitment
• Configuration: Complete 4-piece set (Front and Rear)

Fits 1972-1986 Jeep CJ5, CJ6, CJ7, and Scrambler models. This Omix replacement front fender is engineered as an OE-style direct fit for the passenger (right) side of your vintage Jeep. Stamped from durable steel and finished in a protective primer, it provides a clean foundation for bodywork and paint restoration.

Designed to help maintain the original silhouette of the Jeep CJ series, this panel replaces worn or damaged factory steel while maintaining correct mounting points. For a complete restoration, this unit is commonly paired with the driver-side fender (12004.11) and the side marker light assembly (12401.02).

• Position: Passenger Side (Right)
• Material: Steel
• Finish: Primered
• Replaces OE Number: 5758964
• Manufacturer Part Number: 12004.12
• Warranty: Limited 5-Year Warranty

Fits select 1972-1986 Jeep CJ5, CJ6, CJ7, and Scrambler models.

This Omix OE-style replacement front fender is engineered to restore the original appearance and structural integrity of your Jeep's bodywork. Constructed from heavy-duty steel and finished in a protective primer, this fender is a direct-fit replacement for the factory driver-side panel. It is designed to match original equipment dimensions and mounting points for a straightforward installation, making it an essential component for restoration or repair of classic Jeep CJ series vehicles.

• Position: Left (Driver Side)
• Material: High-quality steel
• Finish: Primered, ready for paint prep
• Manufacturer Part Number: 12004.11
• Replaces OE Number: 5758965
• Compatible Side Marker Light Assembly: 12401.02
• Matching Right Front Fender: 12004.12
• Warranty: Limited 5-Year

Fits 1997-2006 Jeep Wrangler TJ and 2004-2006 Jeep Wrangler LJ models.

Fishbone Offroad Front Tube Fenders provide the ultimate combination of trail protection and increased wheel well clearance. Designed for Jeep owners who demand durability on technical terrain, these fenders replace the vulnerable factory sheet metal with heavy-duty steel. The integrated 3-inch flare helps contain road debris and mud, while the unique perforated side panels promote better airflow and heat dissipation from the engine bay.

Each set is finished in a durable black textured powder coat to resist corrosion and trail rash. These fenders are precision-engineered for a secure fit and are sold as a complete pair for the front of your vehicle.

• Fits 1997-2006 Jeep Wrangler TJ and LJ
• Heavy-duty steel construction
• Integrated 3-inch flare for added tire coverage
• Perforated side panels for improved engine cooling
• Durable black textured powder coat finish
• Sold as a pair (Driver and Passenger sides)
• Manufacturer Part Number: FB23029F

Fits 1997-2006 Jeep Wrangler TJ and LJ models.

Artec Industries Standard Aluminum Front Fenders provide a high-clearance, lightweight solution for off-road enthusiasts looking to increase durability and tire clearance. Constructed from heavy-duty aluminum, these fenders significantly reduce front-end weight compared to steel alternatives while offering superior corrosion resistance. The integrated 3.5-inch flare provides essential tire coverage for street use and helps protect the body from trail debris without compromising aggressive approach angles.

• Fabricated from high-grade aluminum for weight savings and rust prevention
• 3.5-inch flare width offers balanced tire coverage for oversized tires
• Precision CNC cut and bent for accurate fitment on TJ and LJ chassis
• Designed to replace factory front fenders and plastic flares
• Manufacturer Part Number: TJ2022

Upgrade your 2018-2025 Jeep Wrangler JL or Gladiator JT with Artec Industries Vented Front Inner Fenders. These liners are specifically engineered to replace the flimsy factory plastic guards, providing superior protection for your engine bay against trail debris while maintaining essential airflow. Designed with a vented layout to help dissipate engine heat, this set is precision-cut to accommodate Falcon Shocks, ensuring proper clearance for reservoirs and mounting hardware.

• Fits 2018-2025 Jeep Wrangler JL and Gladiator JT (All Engines)
• Specifically designed for compatibility with Falcon Shocks
• Vented design improves airflow and engine bay cooling
• Constructed for maximum tire clearance during articulation
• Replaces restrictive factory plastic inner liners
• Manufacturer Part Number: JL5114

Fits 2018-2025 Jeep Wrangler JL and Gladiator JT models including Sahara (All Engines).

Protect your engine bay from trail debris while significantly improving thermal management with Artec Industries Front Vented Inner Fenders. These liners replace the flimsy factory plastic guards with a more durable, precision-engineered solution designed to withstand the rigors of off-roading. The integrated vented design facilitates better airflow, helping to dissipate heat build-up under the hood—a critical advantage during low-speed rock crawling or high-load situations.

• Specifically engineered for 2018-2025 Jeep Wrangler JL and Gladiator JT platforms
• Vented architecture promotes engine bay cooling and heat dissipation
• Provides superior protection for critical components against mud, rocks, and road salt
• Designed to accommodate all engine configurations
• Manufacturer Part Number: JL5113

Fits 2018-2025 Jeep Wrangler JL Sahara.

Improve your vehicle’s trail readiness and aesthetics with Artec Industries Rear Inner Fenders. These liners are engineered to replace the factory plastic components, providing a more robust barrier against mud, rocks, and debris while increasing clearance for larger tires and high-articulation suspension setups.

• Precision-engineered for the 2018-2025 Jeep Wrangler JL Sahara
• Protects rear wheel wells and chassis components from trail damage
• Enhances aesthetics with a clean, professional appearance
• Designed to accommodate oversized tires and increased suspension travel
• Manufacturer Part Number: JL5111

Fits all 2007-2018 Jeep Wrangler JK and JK Unlimited models, including Rubicon, Sahara, Sport, and X trims.

Replace vulnerable factory plastic flares with the heavy-duty protection of DV8 Offroad 2nd Gen Flat Tube Fenders. These steel fenders are engineered to provide significantly more tire clearance and suspension flex while protecting the body from trail damage. Constructed from thick-wall tubing and rigid steel plating, they feature internal bracing for maximum structural integrity. This 2nd Generation design is wider than the original series to help maintain street legality by providing better tire coverage.

Finished in a durable gloss black, these fenders are ready for installation as-is or can be prepped and painted to match your vehicle's body color. Installation is straightforward, utilizing precision-cut mounting holes that align with factory points. The kit includes rubber guards to prevent metal-to-body contact and high-quality stainless steel hardware.

• Part Number: FENDB-02
• Complete set of 4 (front and rear)
• Rigid steel plating and thick-wall tube construction
• Wider 2nd Gen profile for improved coverage
• Includes exclusive turn signal mounting brackets (lights sold separately)
• Precision fitment for factory mounting locations
• Includes 4 rubber body guards and stainless steel hardware