TCJL-01 2018 to present Jeep JL Tailgate Mounted Tire Carrier. The DV8 Offroad TCJL-01 replaces the weakest link on the OEM spare tire mounting system, unlike Jeeps of the past the JL features a cast steel internal tailgate structure. This means that it is much stronger and more capable of handling heavier loads. The DV8 TCJL-01 replaces the factory bracket that connects the spare to the tailgate itself. It also makes the mounting system adjustable to accommodate up to a 35 inch tire and wheel combo. Key Features: Replaces weak link on OEM spare tire mounting system, Accommodates up to a 35 inch tire and wheel combo, Retains easy access to rear of the Jeep, Allows for adjustability of how high the spare is mounted, Retains OEM taillight, Accommodates the factory backup camera.

• Accommodates Factory 3Rd Brake Light
• Remounts Factory Back Upi Camera
• Accommodates Up To A 35" Tire

This Part Fits:

Innovative spare tire mounting system, for mounting a spare tire in a truck bed.Here are the details: •No more crawling under your truck for the spare! •Simple to use, to install or to remove! •No drilling, cutting or welding required for installation! •An adjustable wrench, a knife, and tape measure are the only tools needed!

• Plated and powder coated finish for long-lived good looks
• Install anywhere on rails in bed!
• Can be used with most bed liners!
• Securely holds most any size tire
• Securely Hold Most Any Size Tire
• Install Anywhere On Rails In Bed
• Can Be Used With Most Bed Liners
• Plated And Powder Coated Finish
• can be locked!
• Made in USA

This Part Fits:

Our Camera Extension Bracket allows you to retain the factory rear camera when running our DV8 Spare Tire Carrier on a JL Rubicon X or a JL with the Xtreme Recon Tire Package. The bracket is made from steel and finished in a micro-texture black powder coat.

• Micro-Texture Black Powder Coat
• 3mm/5mm Steel Construction
• Relocates OEM Rear Camera

* Please Note: The tire carrier can fit up to a 20-inch wheel and a 38” x 13.5” tire. We recommend using the carrier with wheels that have a 4+ inch backspacing, as it is not compatible with -44 offset wheels. The carrier is not compatible with wheels wider than 9.5-inches. It can be used with factory wheels with 2" or larger wheel spacers.

• Retains OEM Third Brake Light

This Part Fits:

The carriers hidden wiring and zip tie tabs allow for clean wire management of the included LED license plate light. With the included cam nut, the carrier can be adjusted for the perfect fit, and it can mount up to a 38x13.50 sized tire/wheel with a -25 max offset. The carrier also features two whip flag/antenna mounts and a hole at the center of the mount for adding a padlock to prevent theft of your spare tire. Our carrier is finished in a resilient micro-texture black powder coat for a uniform and sleek look.

• Fits up to a 38x13.50 Wheel/Tire w/ a -25 Max Offset
• Hidden Wiring & Zip Tie Wire Management Tabs
• Cam Nut Adjustment for the Perfect Fit
• Micro-Texture Black Powder Coat Finish
• Integrated Space for Adding a Padlock
• Included LED License Plate Light
• (2) Whip Flag/Antenna Mounts
• Improves Departure Angle
• 3.5mm Steel Construction
• Steel Tube Design

Our Bumper Mounted Spare Tire Carrier was designed exclusively for use with our RBJK-13 MTO Rear Bumper. The carrier swings out with the tailgate to provide ample access to the cargo area. A dual taper bearing and dual heim hinge pivot provides for easy and smooth operation of the carrier. By moving your spare tire off of the tailgate you protect it from flexing and movement when driving off-road.

• Dual Taper Bearing & Dual Heim Hinge Pivot for Smooth Operation
• Moves Weight Burden off the Aluminum Tailgate
• Micro-Texture Black Powder Coat Finish
• Paintable Aluminum Logo Panel
• Built-In Hi-Lift Jack Mount
• Fits up to a 38x13.50 Tire
• Bolt-On Installation

DV8s Tire Carrier assumes the weight of the spare tire and reinforces the tailgate. It retains the factory tailgates capacity to open-up greater than 150. Included with the carrier is an antenna/whip flag mount, self-lubricating brass bushings, and a third brake light extension. It is finished in a micro-texture black powder coat. Installation is fully bolt-on. It is compatible with all DV8 rear bumpers and the DV8 Rear License Plate Relocation Bracket.

• Compatible w/ DV8s Rear License Plate Relocation Bracket
• Absorbs Weight of Spare Tire & Tailgate Door
• Included Self-Lubricating Brass Bushings
• Retains Factory 150 Opening Capabilities
• Micro-Texture Black Powder Coat Finish
• Included Third Brake Light Extension
• Compatible w/ All DV8 Rear Bumpers
• Included Antenna/ Whip Flag Mount
• Fully Bolt-On Installation
• 4/5mm Steel Construction

This Part Fits:

The DV8 RRDR2-01 chase rack is a bolt on rack that provides for extra lighting and mounting solutions for the rear of your 2010-2018 Dodge Ram 2500. This rack completely enhances the look of the truck and accommodates lighting for extra visibility anywhere it is needed. The rack installs easily, is completely removable, and fits the OEM lines of the truck perfectly. Features: Comes powder coated black, Accommodates multiple lighting combinations, Simple and strong bolt-on design, Comes with mesh aluminum inserts, Excellent light mounting solution, Sold As: Each.

• Accepts 50" Single Row Led Light Bar (BS50E250W5W)
• Accepts 10" Single Row Led Light Bar (BS10E50W5W)
• Accepts (2) 3" Cube Lights (B3CE16W4W)
• Customizable Mesh Inserts

This Part Fits:

The Race Series Chase Rack brings a race-inspired look to the bed of your TRX. Sitting atop the rack is an actuator-controlled mounting point for a 50-inch light bar. This enables you to raise and lower your light bar to fit in your garage or other low-clearance places. It also allows you to cut down on wind drag on the streets or freeway where you don't need the light bar. This was constructed using high strength .120 in. wall steel tubing and lightweight CNC cut aluminum paneling. It is then powder coated with a 2-stage process to protect against rust. Installation is simple, as the chase rack bolts-on without any modifications needed to your truck bed. Hardware and wiring harnesses for both the actuator and light bar are included with the rack. And as always this is Made in America.

• Upper Mount: 50" LED Front Facing Light
• 50 in. Led Front Facing Light
• Light Actuator Kit
• Hammer Black
• Satin Black
• Panel Color
• Upper Mount

This Part Fits:

A redesigned Race Series R chase rack specifically made for the 2017 Ford Raptor adds a head turning style to your Ford Raptor. With all the same benefits and features of our original Race Series R chase rack, the 2017 Raptor version has an upgraded honeycomb style paneling to match the look of the 2017 Ford Raptor. The Race Series R chase rack gives your truck additional mounting options for lighting during those off-road night adventures. Featuring our light actuator kit to raise and lower a front facing Rigid Industries 50 in. LED bar so you can tuck it away when not in use. Light mount tabs for rear facing Duallys provide your Ford Raptor with some additional lighting for anything behind your truck.

• Hammer Black Powder Coat finish With Satin Black Panels
• Mount For 50 in. Rear Facing Light Bar
• Panel Color: Satin Black
• Light Actuator Kit

This Part Fits:

The Ford F-150/Raptor Stealth Fighter Chase Rack is the perfect way to add style to your Raptor without adding bulk. The fully bolt-on design is easy to install with no drilling required, and the mounting slots on the upper piece make it easy to add extra lighting with a 50-inch LED light bar. Third brake light function is fully retained and no bed space is sacrificed. The Stealth Fighter is finished in a hammer black powder coat and as always, Made in America.

• Mounting Slots For Up To A 20 in. Light Bar
• Hammer Black Powder Coat Finish
• 50" light bar mount

This Part Fits: