Monitor critical engine vitals with precision using the SCT Exhaust Gas Temperature (EGT) Sensor Kit. Designed specifically for use with SCT Livewire TS and X4 performance programmers, this kit allows you to view real-time temperature data directly on your device's display. Monitoring EGTs is essential for diesel and high-performance gasoline applications to prevent engine damage from lean conditions or excessive load under boost.

• Stainless steel EGT probe designed for long-term durability in extreme heat
• RFI shielded wiring ensures accurate data transmission without electronic interference
• Industry-standard Type-K connector and SCT Firewire connector for plug-and-play integration
• Encapsulated enclosure protects sensitive electronic components
• Dual ferrule compression fitting provides a secure, leak-free installation into the exhaust manifold or downpipe

Expand the data logging capabilities of your SCT handheld tuner with the SCT Performance 2-Channel Analog Input Cable. This specialized harness allows you to interface external 0-5V analog sensors—such as wideband oxygen sensors, EGT probes, or fluid pressure transducers—directly with your SCT device for real-time monitoring and comprehensive data recording.

By integrating external sensor data into your data logs, you gain a complete picture of your vehicle's performance, which is essential for safe and precise custom tuning and diagnostic analysis. This cable provides a reliable connection for tracking critical engine parameters that are not typically available through the factory OBD-II port alone.

• Enables monitoring and recording of external analog sensor data
• Dual-channel input supports two independent sensor signals
• Directly compatible with SCT X3, SF3, Livewire, and TS-Custom applications
• Essential accessory for accurate wideband air/fuel ratio logging and performance tuning

The SCT Performance USB High Speed Pass-Through Datalogging Cable is a critical component for enthusiasts and professional tuners who require real-time engine monitoring and accurate data collection. This cable facilitates a high-speed connection between your vehicle's OBDII port and your tuning software or handheld device, ensuring low-latency data transfer for high-resolution logging.

Built to handle the rigors of both the dyno cell and the track, this cable is a direct replacement for lost or damaged SCT datalogging leads. Its pass-through architecture allows for seamless communication, making it an essential tool for troubleshooting performance issues or refining custom powertrain calibrations.

• High-speed USB interface for rapid, stable data transmission
• Pass-through design optimized for real-time datalogging and diagnostics
• Heavy-duty construction with reinforced connectors for long-term durability
• Compatible with SCT Performance handheld programmers and custom tuning software
• Direct replacement for original SCT datalogging hardware

Fits select 1992-2019 Ford vehicles including F-150, Explorer, Expedition, E-Series, and Crown Victoria.

This SCT Performance replacement OBDII cord is a direct-fit solution for the SCT X4 Performance Programmer. Designed to replace a damaged, frayed, or lost original cable, this cord restores the essential communication link between your hand-held tuner and the vehicle's ECU. Whether you are flashing a new tune, monitoring live engine data, or clearing diagnostic trouble codes (DTCs), this cable ensures a stable, high-speed connection through the factory OBDII port.

• Direct replacement for the original SCT X4 programmer cable
• High-quality shielding to prevent signal interference during the tuning process
• Precision-molded OBDII and programmer-side connectors for a secure, lock-in fit
• Essential for data logging and vehicle diagnostics
• Compatible with standard Ford OBDII protocols from 1992 to 2019

Fits select 1996-2014 Ford Mustang models.

The SCT Performance X4 Power Flash Window Mount provides a secure, accessible location for your handheld programmer, allowing you to take full advantage of its real-time data monitoring capabilities. By mounting the device to the windshield, you can easily view digital gauges and engine parameters without the tuner sliding on the dashboard or console during spirited driving.

• Heavy-duty suction cup provides a firm attachment to the windshield
• Custom-molded cradle designed specifically to fit the SCT X4 chassis
• Adjustable arm allows for optimal positioning for visibility and reach
• Ideal for monitoring PIDs and data logging during track or street use

This genuine SCT Performance replacement OBD2 cable is designed specifically for the Livewire TS+ performance programmer and monitor. Over time, original cables can suffer from frayed wiring or bent pins due to frequent plugging and unplugging; this cable restores a reliable, high-speed data link between your vehicle's ECU and the tuning device.

Fits select 1999-2016 Cadillac and Chevrolet models, including Escalade, Silverado, Camaro, and Corvette. This cable is essential for flashing custom tunes, monitoring real-time PIDs, and clearing diagnostic trouble codes (DTCs) without connection drops.

• Direct replacement cable for SCT Livewire TS+ devices
• High-quality OBDII connector ensures a secure, stable fit into the diagnostic port
• Heavy-duty insulation for long-term durability in automotive environments
• Restores full communication for tuning and data logging
• Engineered to match original SCT equipment specifications

Keep your engine data front and center with the SCT Performance Livewire TS+ Window Mount. This heavy-duty suction cup mount is designed to securely position your Livewire TS+ programmer on the windshield, allowing you to monitor critical performance PIDs and gauges without taking your eyes off the road.

Fits select 1992-2017 Ford vehicles, including F-150, Expedition, Explorer, E-Series, and Crown Victoria. This mount provides a stable, vibration-free platform for your tuner, ensuring the screen remains legible even on rough terrain or under heavy acceleration.

• Specifically engineered for the SCT Livewire TS+ performance programmer and monitor
• Industrial-strength suction cup ensures a reliable hold on glass surfaces
• Adjustable swivel head allows for precision positioning and optimal viewing angles
• Tool-free installation and quick-release lever for easy removal
• Compact design minimizes windshield obstruction while keeping the device within reach

Fits select 2002-2021 Buick, Cadillac, and Chevrolet models including Enclave, CTS, Escalade, and Avalanche. This heavy-duty mounting solution ensures your SCT BDX performance programmer stays securely positioned for easy monitoring while you drive.

The SCT Magnetic Windshield Mount uses a high-strength suction cup base to adhere firmly to your glass, even when traversing rough terrain. Four integrated neodymium magnets provide a rock-solid attachment point for your device, keeping it front-and-center without vibration or slip. For a professional-grade installation, the included 90-degree HDMI elbow adapter relieves strain on your tuner's port and allows for cleaner wire routing along the dashboard or A-pillar.

• Heavy-duty suction cup base for secure windshield mounting
• 4 ultra-strong neodymium magnets for quick and stable device attachment
• Includes 90-degree HDMI elbow to prevent port strain and improve cable management
• Designed specifically for SCT BDX devices
• Durable construction built to withstand heat and vibration

The Haltech Drive-by-Wire (DBW) Pedal Assembly is designed for enthusiasts and builders converting from traditional mechanical cable setups to modern electronic throttle control. This assembly provides the precise voltage signal required by standalone engine management systems to command electronic throttle bodies with high resolution and reliability.

Engineered for use with Haltech Nexus and Elite series ECUs, this pedal assembly eliminates the complexity of throttle cables and linkages while allowing for advanced tuning features like rev-matching, launch control, and programmable throttle maps.

• Replaces mechanical cable-actuated throttle systems
• Integrated dual-redundancy position sensors for safety and accuracy
• Compatible with Haltech Nexus, Elite, and other DBW-capable standalone ECUs
• Robust construction ensures consistent pedal feel and long-term durability
• Simplifies engine bay aesthetics by removing bulky cable hardware

The HP Tuners H-002-02 OBDII 5ft Cable Extension provides essential reach and flexibility when connecting your vehicle's diagnostic port to your tuning interface. This extension allows tuners and enthusiasts to position their laptop or MPVI device in a more ergonomic or accessible location, making it easier to manage data logging and flashing sessions inside the cabin or in a shop environment.

• Connectors: OBDII Male to OBDII Female
• Length: 5 feet
• Compatibility: Fully compatible with MPVI2, MPVI2+, and MPVI3 interfaces
• Manufacturer Part Number: H-002-02

While not required for the tuning process itself, this heavy-duty cable is a practical solution for solving laptop placement issues caused by short factory interface leads.

The HP Tuners Pro Link+ Cable (H021-002-06) expands the data-logging capabilities of your MPVI2+ or MPVI3 interface, allowing for the integration of external sensors and signals directly into the VCM Scanner software. This cable is essential for enthusiasts and professional tuners who need to monitor wideband O2 sensors, boost sensors, or other auxiliary data alongside factory OBDII parameters.

Designed for professional-grade diagnostics, the PROLINK+ features an M8 connector that breaks out into a versatile 5-wire harness for easy wiring. Note: While compatible with both interfaces, MPVI2+ users must have the Pro Feature Set activated to utilize this hardware. The MPVI3 interface supports the Pro Link+ natively.

• Analog Inputs: 2x dedicated 0-5V analog inputs for external sensors.
• CAN Bus Input: 1x CAN bus input supporting 500kbps data rates.
• High Resolution: 100Hz sampling rate for precise data acquisition.
• Connection: Secure M8 connector to a durable 5-wire harness.
• Manufacturer Part Number: H021-002-06

Fits 2013-2021 Ram 2500 and 3500 heavy-duty trucks equipped with the Cummins CM2450 controller.

The HP Tuners 6-position diesel switch (MPN: H-M04-01) provides a physical interface for selecting different engine maps on the fly. Designed specifically for the Cummins CM2450 ECM, this rotary switch allows drivers to toggle between six distinct calibration levels without needing to reflash the vehicle between changes. It is an essential component for users looking to manage performance, towing, and fuel economy profiles instantly from the cabin.

• Positions: 6-position rotary dial for multiple calibration selection
• Compatibility: Specifically engineered for Cummins CM2450 controllers
• Application: Diesel Switch-on-the-Fly (SOTF) functionality
• Manufacturer Part Number: H-M04-01

Whether you are adjusting for heavy towing loads or optimizing for highway efficiency, this switch provides reliable, tactile control over your diesel engine's performance parameters.

Fits select 2017-2022 Chevrolet Silverado and GMC Sierra 2500 HD and 3500 HD models.

The HPT 6-Position Diesel Switch (H-M04-00) provides on-the-fly adjustment for performance tuning in your GM heavy-duty truck. This rotary switch allows drivers to cycle through six distinct power levels or engine calibrations instantly. The assembly includes a 5-foot OBDII pass-through cable, designed to simplify installation while preserving access to the vehicle's diagnostic port.

Constructed for tactile reliability, the switch features a knurled aluminum knob for a secure grip and a numeric position dial for quick visual verification. Whether you are adjusting for towing, fuel economy, or maximum output, this switch delivers precise control over your diesel engine's performance maps.

• 6-position rotary switch for multi-tune selection
• Durable knurled aluminum switch knob
• Numeric position dial for easy identification
• 5-foot OBDII pass-through cable included
• Manufacturer Part Number: H-M04-00

The HP Tuners EIO (Enhanced Input/Output) Plug is a specialized connector designed exclusively for the MPVI Pro interface. This 8-terminal plug allows tuners and enthusiasts to integrate external 0-5V analog signals directly into the VCM Scanner software, enabling comprehensive data logging that goes beyond standard OBDII parameters.

This connector is essential for wiring in critical external sensors such as wideband O2 controllers, exhaust gas temperature (EGT) probes, and boost or fluid pressure sensors. By utilizing this plug, you can synchronize external sensor data with your vehicle's ECU telemetry for more precise tuning and diagnostics.

• Compatible exclusively with HP Tuners MPVI Pro interfaces
• 8-terminal block for multiple external sensor inputs
• Secure screw-terminal design for reliable signal wire retention
• Facilitates 0-5V analog input logging for widebands and other sensors
• Manufacturer Part Number: H-M01-02

The HP Tuners H-M01-01 is a direct replacement DB-15 to OBD-II cable engineered for the first-generation MPVI Standard and MPVI Pro interfaces. This male-to-male cable establishes the critical communication link between your vehicle’s diagnostic port and the MPVI hardware, allowing for high-speed data logging and ECU calibration via the VCM Suite software.

• Direct Replacement: Restores connectivity for lost or damaged cables on legacy MPVI units.
• Interface: DB-15 male to OBD-II (J1962) male connectors.
• Compatibility: Designed exclusively for MPVI Standard and MPVI Pro devices.
• Reliability: Built to maintain stable communication during critical ECU flashing and scanning operations.
• Manufacturer Part Number: H-M01-01

Relocate your tuning interface for better accessibility and a cleaner cabin workspace with the HP Tuners 5-foot OBDII extension cable. This high-quality cable is specifically designed to work with HP Tuners hardware, providing a secure male-to-female link between your vehicle’s diagnostic port and your interface device.

The right-angle male connector is ideal for vehicles with low-clearance OBDII ports or tight footwells, reducing the risk of accidental kicks or cable strain during data logging sessions. Built to maintain signal integrity, this 5ft lead ensures reliable communication between the ECU and your laptop.

• Length: 5 feet (approx. 1.5 meters)
• Connector Type: Right-angle male to straight female
• Interface Compatibility: Works with MPVI2, MPVI2+, and MPVI3
• Configuration: 16-pin pass-through
• Manufacturer Part Number: H-002-03

Fits select 2018-2023 Chrysler, Dodge, Jeep, and RAM models including 300, Pacifica, Challenger, Charger, Durango, Cherokee, Compass, Gladiator, Grand Cherokee, Wrangler, and Ram 1500/2500/3500/ProMaster.

The HPT Smart Access Cable (H-002-01) is a necessary diagnostic tool for bypassing the Secure Gateway Module (SGW) found on 2018 and newer Stellantis (FCA) vehicles. This module was designed to block unauthorized diagnostic and tuning access via the OBDII port. This cable allows you to regain full control, enabling read, write, and special functions that are otherwise restricted by the factory security hardware.

This cable is a professional-grade solution for technicians and enthusiasts alike, specifically required for logging the ZF8-HP2 transmission. It provides a direct interface for tuning and advanced diagnostic routines that factory security would normally interrupt.

• Bypasses factory Secure Gateway Module (SGW) for full diagnostic access
• Enables read, write, and special function capabilities
• Mandatory for logging the ZF8-HP2 transmission
• Requires an active internet connection for operation
• Heavy-duty connectors for reliable data transmission during tuning
• Manufacturer Part Number: H-002-01

This 6-foot USB-A to USB-C cable is designed for reliable data transmission between your PC and HP Tuners hardware. While included as standard equipment with every MPVI3 interface, this genuine HPT replacement (MPN H-001-02) is ideal for users who need an extra cable for the shop or a replacement for a damaged unit to ensure uninterrupted tuning and logging sessions.

• Interface Compatibility: Fully compatible with MPVI2, MPVI2+, and MPVI3 interfaces.
• Connection Type: USB Type-A to USB Type-C.
• Length: 6 feet (1.8 meters) for convenient reach from the OBDII port to your laptop.
• Manufacturer Part Number: H-001-02.

This HP Tuners USB 2.0 replacement cable is the primary communication link between your vehicle interface and your laptop. Specifically designed for use with the MPVI Standard and MPVI Pro, this USB-A to USB-B cable ensures stable data transmission for critical tuning and diagnostic tasks using the VCM Suite software. It is a direct replacement for the original cable supplied with these devices.

• Interface Compatibility: Exclusively for MPVI Standard and MPVI Pro interfaces
• Connection Type: USB Type-A to USB Type-B
• Length: 3-foot cable
• Application: Required for vehicle tuning, data logging, and diagnostics
• Manufacturer Part Number: H-001-01