Fits 2015-2021 Subaru WRX Base, Limited, and Premium models.

The Whiteline BSK017 Front and Rear Sway Bar Kit is a comprehensive handling solution engineered to reduce body roll, neutralize understeer, and sharpen steering response. By increasing the roll stiffness of the chassis, this kit ensures your tires maintain a more consistent contact patch during hard cornering, providing the "more grip" required for spirited driving and track applications. The kit features adjustable bars that allow you to fine-tune the handling balance to your specific driving style or tire setup.

• Front Sway Bar: 26mm 2-point adjustable.
• Rear Sway Bar: 22mm 3-point adjustable.
• Heavy-duty alloy end links with steel ball joints and up to 25mm of on-car length adjustment.
• Synthetic elastomer bushings featuring internal bore knurling and grease retention lips for consistent lubrication.
• DIY lateral locks prevent sideways shifting of the sway bar under heavy cornering loads.
• Dual-layer protection with corrosion-resistant plating and a durable powder-coated finish.
• Includes internal grease reservoirs for reduced maintenance and friction management.
• Supplied with molybdenum disulphide (LM) grease and a detailed installation guide.
• Manufacturer Part Number: BSK017

Fits 2008-2014 Subaru Impreza WRX, including 2.5 GT, Limited, and Premium models.

The Whiteline BSK011 sway bar kit is a complete handling solution designed to reduce body roll and increase chassis rigidity. This kit features a 22mm 2-point adjustable front sway bar and a 22mm 3-point adjustable rear sway bar, allowing you to fine-tune your vehicle's oversteer and understeer characteristics. By replacing thin factory units with high-tensile adjustable bars, you achieve flatter cornering and more precise steering response during aggressive driving or lane changes.

The kit includes heavy-duty sway bar links with ball joint ends that allow for up to 25mm of on-car length adjustment to eliminate sway bar preload. The included bushings are manufactured from Whiteline's proprietary synthetic elastomer, featuring internal bore knurling and grease retention lips for consistent lubrication and silent operation. All metal components are finished with a combination of protective plating, E-coat, and powder coating for maximum corrosion resistance in harsh environments.

• Manufacturer Part Number: BSK011
• Front Sway Bar: 22mm (2-point adjustable)
• Rear Sway Bar: 22mm (3-point adjustable)
• Heavy-duty adjustable end links with 25mm range
• Forged ends for maximum strength at mounting points
• DIY lateral locks to prevent sway bar shifting
• Synthetic elastomer bushings with internal grease reservoirs
• Includes installation guide and molybdenum disulphide grease

Fits 1993-2000 Nissan Skyline R33 and R34 GT-S models.

The Whiteline BNK010 sway bar kit is an engineered handling solution designed to "Activate More Grip" by reducing body roll and improving the chassis balance of your vehicle. By minimizing lean during cornering, this kit ensures a more stable tire contact patch and sharper steering response, providing a more predictable and controlled driving experience.

This kit features a 24mm 4-point adjustable front sway bar paired with a 22mm 2-point adjustable rear sway bar. This adjustability allows drivers to fine-tune the suspension's roll stiffness to match specific driving styles or track conditions. Both bars are finished in a durable, protective powder coating that acts as a hard skin to resist corrosion and survive harsh undercar environments.

The included bushings utilize high-grade synthetic elastomer technology. Engineered with internal bore knurling and grease retention lips, these bushings maintain optimum lubrication for silent, low-friction operation. Internal grease reservoirs provide continual self-lubrication, ensuring long-term performance and friction management.

• Front Sway Bar: 24mm diameter, 4-point adjustable
• Rear Sway Bar: 22mm diameter, 2-point adjustable
• Bushings: Synthetic elastomer with internal grease reservoirs and bore knurling
• Hardware: Includes extreme pressure molybdenum disulphide (LM) grease
• Finish: Corrosion-resistant silver powder coating
• Manufacturer Part Number: BNK010

Fits 1993-2002 Chevrolet Camaro (Base, Indianapolis 500 Pace Car, RS, Z28, Z28 SS) and Pontiac Firebird (Base, Formula, Trans Am, Trans Am GT).

Improve the handling balance and significantly reduce body roll on your F-Body with the BMR Suspension SB026R sway bar kit. This front and rear set is engineered to replace the soft factory bars that often rely on small diameter stock or thin-wall tubing. By increasing the torsional spring rate, this kit allows you to tune the understeer and oversteer characteristics of the vehicle for flatter cornering and more predictable transitions. Whether you are building a street performer, an autocross contender, or a dedicated road race car, this kit provides the stiffness needed to manage vehicle weight and motion ratios effectively.

The bars are manufactured from heavy-wall 35mm (front) and 25mm (rear) DOM tubing. Unlike hot-formed alternatives, BMR cold-forms these bars to better resist torsional fatigue and maintain their "memory" over years of hard use. Each bar is CNC-formed for exact manufacturing tolerances and a precise fit. The kit includes 88-durometer, low-deflection polyurethane bushings that are internally fluted to retain grease and minimize friction. For maximum durability, the steel mounting brackets are reinforced to prevent deflection under high cornering loads.

• Manufacturer Part Number: SB026R
• Front Sway Bar: 35mm heavy-wall DOM tubing
• Rear Sway Bar: 25mm heavy-wall DOM tubing
• Finish: Red powder coat for corrosion resistance
• Bushings: 88-durometer polyurethane with internal grease flutes
• Design: CNC-formed and cold-formed for superior fatigue resistance
• Installation: Replaces factory sway bars using reinforced steel brackets

Fits 2015-2024 Ford Mustang models, including EcoBoost, GT, V6, Bullitt, Mach 1, Dark Horse, and Shelby GT350/GT500.

Designed to significantly reduce body roll and improve handling characteristics, the BMR Suspension SB043H sway bar kit is engineered for street performance, autocross, and road racing. This kit features heavy-duty 35mm front and 25mm rear DOM steel tubing, providing much higher torsional spring rates than factory bars to eliminate understeer and oversteer imbalances.

Every BMR sway bar is CNC-formed to exacting tolerances and cold-formed to resist torsional fatigue, ensuring the bars retain their memory and performance over time. To prevent lateral movement during high-G cornering, thrust washers are welded directly to the front bar. The kit includes 88-durometer, low-deflection polyurethane bushings that are internally fluted to retain grease and ensure quiet, maintenance-free operation.

• Front Sway Bar: 35mm DOM steel tubing
• Rear Sway Bar: 25mm DOM steel tubing
• Material: Cold-formed CNC-bent steel
• Finish: Durable Black Hammertone powder coat
• Bushings: 88-durometer fluted polyurethane
• Hardware: Welded thrust washers for positive bar location
• Manufacturer Part Number: SB043H

Fits select 1990-1997 Mazda Miata and 2004-2011 Mazda RX-8. This Whiteline BMK002 kit is a complete handling solution designed to reduce body roll, increase chassis rigidity, and improve steering response during high-speed cornering and lane changes.

This kit replaces restrictive factory bars with a 24mm 2-point adjustable front sway bar and a 16mm 3-point adjustable rear sway bar. By providing multiple mounting points, this setup allows for fine-tuned chassis balance to suit your driving style. The package includes high-strength adjustable end links that eliminate sway bar preload and allow for up to 25mm of on-car length adjustment. The heavy-duty ball joints rotate to any angle for stress-free fitment and maximum articulation.

Construction features include forged ends for maximum strength at the mounting points and DIY lateral locks to prevent the bars from shifting under heavy cornering loads. The included bushings are made from Whiteline's proprietary synthetic elastomer, featuring internal bore knurling and grease reservoirs for self-lubrication and resistance to oil, ozone, and weathering.

• Front Sway Bar: 24mm (2-point adjustable)
• Rear Sway Bar: 16mm (3-point adjustable)
• High-strength adjustable front and rear sway bar links
• Synthetic elastomer bushings with internal grease retention lips
• Protective powder coating and plating for superior corrosion resistance
• Heavy-duty steel ball joint ends
• Includes lateral locks and extreme pressure molybdenum disulphide (LM) grease
• Manufacturer Part Number: BMK002

Fits select 1978-1988 GM G-Body vehicles, including Buick Regal, Chevrolet El Camino, Malibu, Monte Carlo, Oldsmobile Cutlass, and Pontiac Grand Prix or Bonneville.

The UMI Performance 1.250-inch (32mm) solid front sway bar is a direct bolt-on upgrade designed to significantly reduce body roll and minimize understeer on the GM G-Body platform. While factory bars were often as small as 7/8-inch, this CNC-bent one-piece unit is manufactured from 4140 chrome moly steel to provide a much higher 428 lb/in deflection rate for flatter, more responsive cornering. The bar features a 44 11/16-inch center-to-center distance for precise fitment without vehicle modification.

This kit provides everything needed for a complete installation, including greaseable polyurethane bushings and heavy-duty zinc-plated clamshells. It also includes new high-quality end links to ensure a firm, reliable connection between the sway bar and the control arms. The bar is finished in a durable powder coating for long-term protection against the elements.

• Manufacturer Part Number: 3035-R
• Construction: Solid 1.250" (32mm) 4140 Chrome Moly Steel
• Deflection Rate: 428 lb/in
• Center-to-Center Distance: 44 11/16"
• Finish: Powder Coated (Red or Gloss Black)
• Hardware: Includes greaseable bushings, zinc-plated clamshells, and end links
• Installation: Direct bolt-in; no drilling or welding required

The Whiteline BWK004 Front and Rear Sway Bar Kit fits select 2004-2015 Audi A3, TT, and Volkswagen Eos, Golf, Jetta, and Rabbit models (1.8T / 2.0T). This engineered suspension solution is designed to reduce body roll, improve cornering grip, and enhance steering response by increasing the vehicle's lateral stiffness.

This kit features 24mm heavy-duty sway bars with multi-point adjustment: 3-point front and 2-point rear. These adjustment points allow drivers to fine-tune the handling balance to suit specific driving conditions or preferences. The bars are manufactured from high-quality alloy with forged ends for maximum strength at the link mounting points. To ensure long-term durability and corrosion resistance, all metal components feature a protective plating and powder-coated finish.

The package includes Whiteline’s synthetic elastomer bushings, which utilize internal bore knurling and grease retention lips for consistent lubrication. The included adjustable sway bar links eliminate preload and allow for up to 25mm of on-car length adjustment. DIY lateral locks are also provided to prevent sideways movement of the bar under heavy cornering loads.

• Part Number: BWK004
• Front Sway Bar: 24mm, 3-point adjustable
• Rear Sway Bar: 24mm, 2-point adjustable
• Bushings: Synthetic elastomer with PTFE lining for low friction
• Hardware: Heavy-duty ball joint end links and lateral locks included
• Finish: Powder-coated and anodized alloy for superior corrosion resistance

Fits 2000-2005 Toyota MR2 Spyder Base.

The Whiteline 22mm front adjustable sway bar is engineered to reduce body roll and spread lateral loads more evenly across the tires, significantly increasing cornering grip and improving the handling characteristics of the MR2 Spyder. This heavy-duty upgrade provides a more stable platform for performance driving without sacrificing ride quality or comfort.

This kit features a 2-point adjustment system, allowing you to fine-tune the vehicle's roll stiffness to suit your driving style or specific track conditions. To ensure long-lasting performance and quiet operation, the included mounts utilize Whiteline's synthetic elastomer formulation, which is resistant to oil, grease, ozone, and weathering. The bushings are designed with internal bore knurling and grease retention lips to maintain lubrication and manage friction.

• Part Number: BTF81Z
• Diameter: 22mm Heavy Duty Solid Spring Steel
• Adjustment: 2-Point multi-point adjustment
• Bushing Technology: Synthetic elastomer with internal grease reservoirs
• Hardware: DIY lateral locks to prevent sideways movement under load
• Finish: Corrosion-resistant protective powder coating
• Included: Sway bar, bushings, lateral locks, molybdenum disulphide (LM) grease, and install guide

Fits select 2008-2021 Subaru Forester, Impreza, WRX, STI, Legacy, Outback, and XV Crosstrek. This Whiteline BSR49XXZ rear sway bar is engineered to increase cornering grip and reduce body roll by spreading lateral loads more evenly across all four tires.

The 24mm heavy-duty blade features 3-point adjustability, allowing you to fine-tune your vehicle's handling characteristics for specific driving conditions or preferences. The bar is finished with a protective plating and powder coating for long-term corrosion resistance, while the forged ends provide maximum strength at the link mounting points. This kit includes DIY lateral locks to prevent sideways movement of the bar under high cornering loads.

• Diameter: 24mm
• Adjustment: 3-point adjustable
• Bushings: Synthetic elastomer with internal bore knurling and grease retention lips
• Hardware: Lateral locks and install guide included
• Installation: Direct bolt-on; estimated 1-hour install time
• Warranty: 3-year / 60,000-mile manufacturer warranty
• Manufacturer Part Number: BSR49XXZ

Fits select 2004-2013 Subaru Forester and 2008-2014 Subaru Impreza, WRX, and STI models.

Engineered to "Activate More Grip," this Whiteline heavy-duty front sway bar is designed to reduce body roll and stabilize the vehicle's chassis during cornering. By effectively distributing lateral loads across the tires, this 22mm sway bar increases cornering grip and improves overall handling precision without compromising ride quality. The 2-point adjustability allows drivers to fine-tune the stiffness to suit specific driving conditions or performance preferences.

Constructed with forged ends for maximum strength, the sway bar features a durable protective powder coating to resist corrosion and wear. The kit includes DIY lateral locks to prevent sideways movement under heavy cornering loads and high-performance synthetic elastomer bushings. These bushings utilize internal bore knurling and grease retention lips to ensure consistent lubrication and long-term durability against oil, ozone, and weathering.

• Diameter: 22mm
• Adjustment: 2-point multi-hole adjustment
• Construction: Heavy-duty steel with forged ends and silver powder coat finish
• Bushings: Synthetic elastomer with grease retention knurling
• Hardware: Includes DIY lateral locks and detailed installation guide
• Manufacturer Part Number: BSF39Z

Fits 1977-1979 Ford F-150 and Bronco 4WD models.

Correct your suspension geometry after a lift with Skyjacker SBE205 extended sway bar end links. When a vehicle is lifted, the factory sway bar angle is altered, which can limit articulation and lead to unpredictable handling. These extended links are engineered to restore the proper sway bar orientation, ensuring your suspension performs correctly throughout its full range of travel.

Constructed from high-quality materials and equipped with durable polyurethane bushings, these links resist deflection and outlast standard rubber components. Whether you are navigating off-road trails or maintaining stability on the street, these links provide the extra articulation required for lifted 4x4 applications.

• Manufacturer Part Number: SBE205
• Designed specifically for lifted 4WD applications
• Corrects sway bar operating angle to improve handling and geometry
• High-performance polyurethane bushings for maximum durability
• Limited Lifetime Warranty

Fits 2014-2019 Chevrolet Corvette Stingray, Z06, Grand Sport, and ZR1.

Progress Tech Sport-tuned sway bars are engineered to dramatically improve the handling of the C7 Corvette by minimizing body roll and maintaining a flatter tire contact patch during aggressive cornering. By replacing the smaller factory bars and soft rubber bushings with larger diameter alloy steel and firm polyurethane, this kit increases roll stiffness to provide more grip, better chassis balance, and reduced understeer.

Each bar is cold-formed in-house using precision CNC bending equipment. The ends are laser-cut and CNC-machined before being MIG-welded in fixed fixtures to ensure a perfect bolt-on fit. This kit includes a non-adjustable front bar and an adjustable rear bar for fine-tuning your Corvette's handling characteristics.

• Front Sway Bar: 31.8mm, tubular, non-adjustable
• Rear Sway Bar: 33.3mm, tubular, adjustable
• Material: High-strength alloy steel
• Bushings: Performance polyurethane
• Finish: Durable powder coat
• Proudly made in the USA
• Manufacturer Part Number: 63.0481

Improve the cornering performance and stability of your lowered 1996-2025 Ford F-150 with the Hotchkis Sport Suspension 2242 Sport Sway Bar Set. Specifically engineered for trucks with a 2-3 inch drop, these bars significantly reduce body roll and sharpen steering response. The lightweight hollow construction provides the necessary stiffness to flatten out corners without adding the excessive weight found in solid bar designs.

Each set is tested and tuned for optimal balance and includes greasable polyurethane bushings for long-lasting, quiet operation. The package comes complete with stainless steel U-bolts, end links, and fabricated brackets for a comprehensive installation. All components are powder-coated for maximum durability and corrosion resistance.

• Front Sway Bar: 1-1/2 in. diameter hollow construction
• Rear Sway Bar: 1 in. diameter hollow construction
• Application: Designed specifically for trucks lowered 2-3 inches
• Construction: Lightweight hollow tubing with a durable powder-coated finish
• Included Hardware: Greasable polyurethane bushings, stainless U-bolts, end links, and fabricated brackets
• Manufacturer Part Number: 2242

Fits 2021-2025 Ford F-150 2WD/4WD models with 0-2 inches of rear lift, including Raptor, Tremor, and heavy-duty configurations.

The Hellwig 7788 rear sway bar is a critical suspension upgrade for F-150 owners looking to eliminate excessive body roll and improve lateral stability. While factory sway bars are often undersized for the demands of towing or hauling heavy payloads, this 1-inch solid rear bar is engineered to increase roll stiffness, providing a more planted feel through corners and reducing the "white-knuckle" sensation during high-speed maneuvers or heavy crosswinds.

Constructed from high-strength, solid heat-treated chromoly steel, this sway bar offers superior durability and resistance to deformation compared to hollow alternatives. The bolt-on design allows for a straightforward installation using provided hardware, making it a highly effective investment for both daily drivability and demanding tow/haul conditions.

• Bar Diameter: 1 inch
• Material: Solid, heat-treated chromoly steel
• Compatibility: Fits 2WD and 4WD models with 0-2" of rear lift
• Performance: Reduces body roll and improves cornering traction
• Manufacturer Part Number: 7788
• Warranty: Limited Lifetime Warranty

Fits 2005-2012 Porsche Boxster and 2006-2012 Cayman models. The Eibach Anti-Roll-Kit is a performance suspension upgrade engineered to reduce body roll and improve cornering stability. By increasing the stiffness of the stabilizer bars, this kit allows for flatter cornering, more precise turn-in, and increased driver confidence without compromising overall ride quality.

Each sway bar is cold-formed from high-strength steel for durability and precision-tuned to provide neutral handling balance for the mid-engine Porsche chassis. This kit is designed to work with both factory and aftermarket performance suspension systems and includes all necessary mounting hardware for a direct-fit installation.

• Front Sway Bar Diameter: 26 mm
• Rear Sway Bar Diameter: 23 mm
• Reduces body roll during cornering and rapid directional changes
• Cold-formed, high-strength aircraft-grade steel construction
• Precision-tuned for improved stability and control
• Includes all necessary mounting hardware and bushings
• Made by Eibach in the USA
• Manufacturer Part Number: E40-72-008-01-11

Fits 2013-2022 Subaru BRZ, 2017-2020 Toyota 86, and 2013-2016 Scion FR-S.

The Eibach Anti-Roll-Kit allows you to fine-tune the handling characteristics of your vehicle by increasing the torsional stiffness of the front suspension. This 25mm front stabilizer bar significantly reduces body roll during cornering and rapid directional changes without compromising ride quality. By keeping the chassis flatter through turns, the kit improves tire contact patches for increased grip and sharper turn-in response.

Each bar is cold-formed from high-strength aircraft-grade steel for precision performance and finished with a durable red powder coat. The kit comes complete with all necessary mounting hardware and greasable bushings for a straightforward installation to factory mounting points.

• Part Number: 82105.310
• Diameter: 25mm
• Position: Front
• Material: High-strength, cold-formed steel
• Reduces body roll and increases cornering stability
• Precision-tuned for balance and control
• Includes all necessary mounting hardware and bushings
• Made by Eibach in the USA

Fits 2013-2018 Ford Focus S, SE, ST, Titanium, and Electric models (2.0L).

The Eibach Anti-Roll-Kit allows you to fine-tune the handling characteristics of your vehicle by reducing body roll through increased roll stiffness. This 27mm front stabilizer bar is cold-formed from high-strength aircraft-grade steel for long-lasting precision and durability. By minimizing lean in the corners, the kit improves lateral stability and steering response, providing a more balanced and predictable feel during spirited driving or track use.

• Diameter: 27mm front bar
• Material: Cold-formed, high-strength aircraft-grade steel
• Performance: Reduced body roll and improved cornering stability
• Compatibility: Engineered to work with both OEM and performance suspension setups
• Hardware: Includes all necessary mounting hardware for installation
• Origin: Manufactured by Eibach in the USA
• Part Number: 35140.310

Fits 2020-2026 Ford Explorer King Ranch, Platinum, and ST (3.0L).

The aFe Control sway bar set is engineered to dramatically reduce body roll and sharpen steering response without compromising ride quality. These 3-way adjustable bars allow drivers to dial in handling balance, providing better turn-in and increased stability during spirited driving or while hauling heavy loads. Every bar is CAD-designed and CNC-bent to strict tolerances to ensure a precise, direct-fit installation with no vehicle modifications required.

• Front Sway Bar: 38mm (1.5") diameter tubular bar, 3-way adjustable.
• Rear Sway Bar: 25.4mm (1") diameter solid bar, 3-way adjustable.
• Front Rates: 387 lbs/in (+31%), 425 lbs/in (+44%), 475 lbs/in (+61% stiffer than stock).
• Rear Rates: 227 lbs/in (+97%), 260 lbs/in (+126%), 290 lbs/in (+152% stiffer than stock).
• Bushings & Brackets: 90A durometer polyurethane bushings with 6061-T6 billet aluminum black anodized brackets; rear brackets feature grease fittings for easy maintenance.
• Construction: CNC-bent with robotically welded ends and a durable red powder coat finish.
• MPN: 440-304001-R

Fits select 2016-2025 Mazda MX-5 Miata and 2017-2020 Fiat 124 Spider (Abarth, Classica, Lusso, Urbana, Club, Grand Touring, Sport, and RF).

The Eibach Anti-Roll-Kit (MPN: E40-55-019-01-11) is engineered to significantly reduce body roll during cornering and rapid directional changes. By increasing the torsional stiffness of the vehicle's stabilizer system, these front and rear sway bars provide a flatter, more stable platform that enhances mechanical grip and steering response without compromising ride quality.

Each bar is cold-formed from high-strength, aircraft-grade steel and precision-tuned to provide balanced handling and improved driver control. This kit is designed for a direct-fit installation and is compatible with both factory suspension and performance aftermarket setups.

• Reduces body roll and increases lateral stability
• Manufactured from high-strength, cold-formed steel for precision durability
• Includes front and rear stabilizer bars
• Comes with all necessary mounting hardware
• Engineered and tested for the ND Miata and 124 Spider chassis
• Made by Eibach in the USA
• Manufacturer Part Number: E40-55-019-01-11

Fits 2016-2024 Infiniti Q50 and Q60 AWD models (V6-3.0L tt).

Transform your Infiniti's handling characteristics with the aFe CONTROL sway bar set. Designed to eliminate understeer and significantly reduce body roll, this set maximizes tire contact patches for improved cornering grip. By sharpening steering response and improving initial turn-in, these bars make the chassis feel more agile and composed during spirited driving, autocross, or track use.

Every aFe CONTROL sway bar is CAD designed and CNC bent to strict tolerances to ensure a precise fit and reliable operation. Both bars feature CNC machined ends that are robotically welded in dedicated fixtures for consistent hole positioning. To maintain performance and ease of service, the kit includes low-deflection polyurethane bushings and 6061-T6 aluminum black anodized billet brackets equipped with integrated grease fittings.

• Front Adjustment: 2-Way adjustable
• Rear Adjustment: 3-Way adjustable
• Stiffness: 730 lbs/in (232% stiffer than stock)
• Construction: CNC bent steel with robotically welded ends
• Hardware: 6061-T6 billet aluminum brackets and polyurethane bushings
• MPN: 440-711002-L

Fits 1982-2002 Chevrolet Camaro and Pontiac Firebird models (including Z28, SS, Formula, and Trans Am).

Drastically reduce body roll and improve the cornering balance of your third or fourth-gen F-body with the BMR SB003R rear sway bar kit. Designed for street performance, drag racing, and autocross, this kit provides a 149% increase in sway bar rate over the factory equipment. This allows for significantly flatter cornering and more predictable handling characteristics without the weight penalty of a solid bar.

The SB003R is manufactured from 25mm heavy-wall DOM tubing and is CNC cold-formed to ensure exact tolerances and superior resistance to torsional fatigue. Unlike hot-formed bars, this cold-forming process helps the bar retain its "memory" and spring rate over years of hard use. The kit includes 88-durometer polyurethane bushings that are internally fluted to retain grease, paired with reinforced, TIG-welded steel end links to minimize deflection under load.

• Fits 1982-2002 Chevrolet Camaro and Pontiac Firebird
• 25mm heavy-wall hollow DOM tubing construction
• Cold-formed and CNC-bent for precision fitment
• Durable red powdercoat finish
• Includes 88-durometer polyurethane bushings and TIG-welded end links
• Approximate 149% rate increase over stock
• Installation time: 1-2 hours
• Manufacturer Part Number: SB003R
• Proudly made in the USA

Fits 2022-2025 Subaru BRZ Limited, Premium, and TS models.

The Whiteline BTR105Z is a 16mm 3-point adjustable rear sway bar engineered to reduce body roll and improve cornering grip by spreading lateral loads more evenly across the tires. This suspension upgrade enhances handling precision and safety without compromising ride quality or comfort. The multi-point adjustment allows drivers to fine-tune the vehicle's roll stiffness to suit specific driving preferences or track conditions.

Constructed with durability in mind, this sway bar features a protective powder coating that resists corrosion and weathering. It includes Whiteline's advanced synthetic elastomer bushings, designed with internal bore knurling and grease retention lips for consistent lubrication and long-term performance.

• Part Type: Rear Sway Bar
• Diameter: 16mm
• Adjustment: 3-Point Adjustable
• Material: High-quality spring steel with protective powder coating
• Bushing Material: Synthetic elastomer with internal knurling
• Manufacturer Part Number: BTR105Z

Kit Contains: 1 Sway Bar, 2 Bushings, and 2 Braces.

Fits select 2013-2016 Scion FR-S, 2013-2020 Subaru BRZ, and 2017-2020 Toyota 86 models.

Engineered to "Activate More Grip," the Whiteline Rear 18mm 3-Point Adjustable Sway Bar is a premier handling upgrade for the ZN6/ZC6 platform. By reducing body roll during cornering, this kit ensures lateral loads are spread more evenly across all four tires, increasing overall grip and improving turn-in response without sacrificing ride quality or comfort. The multi-point adjustment allows you to fine-tune the vehicle's handling characteristics to match your driving style and track conditions.

This comprehensive kit (MPN BSR54XZ) includes heavy-duty adjustable endlinks featuring high-strength steel ball joints. These links provide up to 25mm of on-car length adjustment, allowing you to eliminate sway bar preload—a critical factor for cars with modified suspension heights. The bar is protected by a durable powder coating and features forged ends for maximum strength at the mounting points.

• Diameter: 18mm solid spring steel construction.
• Adjustability: 3-point adjustable bar and 25mm adjustable endlinks.
• Bushings: Synthetic elastomer with internal bore knurling and grease retention lips for optimal lubrication.
• Hardware: Includes DIY lateral locks to prevent shifting and molybdenum disulphide (LM) grease for extended life.
• Corrosion Resistance: Protective plating and powder coating on all metal components.

Fits select 2013-2026 Subaru BRZ, Toyota 86/GR86, and Scion FR-S models. This Whiteline BSK020 sway bar kit is a complete handling solution designed to reduce body roll, sharpen steering response, and maximize the mechanical grip of the ZN6/ZC6 and ZN8/ZD8 chassis.

This comprehensive kit features a 22mm 2-point adjustable front sway bar and a 16mm 3-point adjustable rear sway bar, allowing for precise chassis tuning to suit your driving style or track conditions. To ensure immediate transfer of energy, the kit includes heavy-duty adjustable sway bar links featuring forged ends and steel ball joints. These links allow for on-car length adjustment of up to 25mm to eliminate sway bar preload, which is critical for vehicles with altered ride heights.

• 22mm 2-point adjustable front sway bar and 16mm 3-point adjustable rear sway bar
• Synthetic elastomer bushings with internal bore knurling and grease retention lips
• Adjustable end links with heavy-duty steel ball joints and 25mm adjustment range
• DIY Lateral locks to prevent sway bar shifting under high cornering loads
• Corrosion-resistant protective plating and powder coating on all metal components
• Includes extreme pressure molybdenum disulphide (LM) grease and detailed install guide
• Manufacturer Part Number: BSK020

Fits 2004-2006 Subaru Impreza WRX STI.

The Whiteline BSK009M sway bar kit is a comprehensive handling solution engineered to reduce body roll, increase cornering grip, and improve chassis balance. This package replaces the factory components with high-diameter 24mm bars, featuring a 2-point adjustable front bar and a 3-point adjustable rear bar. These multiple adjustment holes allow drivers to fine-tune the vehicle's roll stiffness to compensate for different tires, track conditions, or driver preferences.

Constructed from high-tensile alloy with forged ends, these bars are finished in a multi-stage protective coating including E-Coat and powder coating for superior corrosion resistance. The kit includes Whiteline's signature synthetic elastomer bushings, featuring internal bore knurling and grease retention lips for consistent lubrication and noise-free operation.

• Front Sway Bar: 24mm diameter, 2-point adjustable
• Rear Sway Bar: 24mm diameter, 3-point adjustable
• High-strength end links with heavy-duty steel ball joints
• Synthetic elastomer bushings resistant to oil, grease, and ozone
• DIY lateral locks to prevent sway bar shifting under heavy cornering loads
• Includes extreme pressure molybdenum disulphide (LM) grease and detailed installation guide
• Manufacturer Part Number: BSK009M

Fits 2002-2007 Subaru Impreza WRX, WRX Limited, WRX TR, and 2007 WRX STI.

The Whiteline BSK007M is a comprehensive handling solution designed to significantly reduce body roll and increase chassis rigidity for the GD-platform WRX. This kit features a 24mm 2-point adjustable front sway bar and a 24mm 3-point adjustable rear sway bar, allowing for precise tuning of the vehicle's handling balance. By replacing the flexible factory components with high-strength forged ends and heavy-duty links, this kit delivers more immediate steering response and stability during high-speed cornering and lane changes.

The included sway bar mounts utilize Whiteline's proprietary synthetic elastomer bushings, featuring internal bore knurling and grease retention lips for consistent lubrication and silent operation. All metal components are finished with protective plating and powder coating to withstand harsh environmental conditions and resist corrosion.

• 24mm front sway bar (2-point adjustable) and 24mm rear sway bar (3-point adjustable)
• Heavy-duty sway bar links with steel ball joint ends for maximum strength
• On-car length adjustment up to 25mm to eliminate sway bar preload
• DIY lateral locks prevent bar shifting or sideways movement under lateral loads
• Synthetic elastomer bushings resistant to oil, grease, ozone, and weathering
• Internal grease reservoirs for continual self-lubrication
• Includes molybdenum disulphide (LM) based grease and installation guide
• Manufacturer Part Number: BSK007M

Fits 2002-2007 Subaru Impreza WRX and WRX STI (including Limited and TR models).

The Whiteline BSK007 Sway Bar Kit is a complete suspension solution designed to reduce body roll, increase cornering grip, and improve the overall steering response of your vehicle. By replacing the smaller factory units with larger 22mm diameter bars, this kit neutralizes the handling balance and provides the rigidity needed for performance driving. The kit includes a 2-point adjustable front sway bar and a 3-point adjustable rear sway bar, giving you the ability to fine-tune the roll stiffness to suit your specific driving conditions.

Built for durability and precision, the kit features forged ends for maximum strength at the mounting points and DIY lateral locks to prevent the bars from shifting during high-G cornering. The included heavy-duty end links utilize steel ball joints and synthetic elastomer bushings to eliminate the flex common in original equipment. Every metal component is finished with a multi-stage protective coating, including E-coat and powder coating, to resist corrosion and weathering in harsh environments.

• Front Sway Bar: 22mm diameter, 2-point adjustable
• Rear Sway Bar: 22mm diameter, 3-point adjustable
• Heavy-duty end links with steel ball joints and synthetic elastomer bushings
• Synthetic elastomer mounts with internal bore knurling and grease retention lips
• DIY lateral locks prevent sideways bar movement under load
• Forged ends for maximum strength at the link mounting points
• Includes molybdenum disulphide (LM) grease and detailed installation guide
• Manufacturer Part Number: BSK007

Fits 2005-2021 Nissan Frontier (S, SV, SL, SE, LE, XE, PRO-4X, Desert Runner, and Nismo Off-Road).

The Whiteline BNR45Z 20mm heavy-duty rear sway bar is engineered to reduce body roll and improve cornering grip by spreading lateral loads more evenly across the tires. This 3-point adjustable bar allows you to fine-tune your vehicle's handling characteristics to suit your driving style and load requirements, providing a significant improvement in stability and tire wear without compromising ride comfort.

Constructed for long-term durability and consistent performance, this kit includes everything needed for a straightforward installation to factory mounting points. The adjustable design enables precise control over the rear roll stiffness, making it an essential upgrade for both daily driving and off-road performance.

• Part Number: BNR45Z
• Diameter: 20mm
• Adjustment: 3-Point Adjustable
• Reduces body roll and improves lateral grip
• Kit Includes: 1 Sway Bar, 2 Links, 2 Bushings, 2 Tubes, 2 Saddles, 4 Brackets, 2 U-Bolts, 4 Washers, 2 Nuts, 2 Bolts

Fits 2009-2018 Nissan GT-R (Base, Black Edition, Nismo, Premium, and Track Edition) models.

The Whiteline BNK008 handling kit is a comprehensive suspension solution designed to eliminate body roll and maximize mechanical grip. This engineered package features a 33mm 2-point adjustable front sway bar and a 20mm 3-point adjustable rear sway bar, allowing for precise chassis tuning to suit various track conditions or driving styles. By replacing the high-compliance factory bars with higher-rate alloy steel units, this kit significantly increases roll stiffness and improves steering response during initial turn-in and rapid transitions.

This kit includes heavy-duty adjustable end links that feature 25mm of on-car length adjustment, allowing you to eliminate sway bar preload and maintain proper geometry on lowered vehicles. The included synthetic elastomer bushings utilize internal knurling and grease retention lips for consistent lubrication, while a PTFE lining ensures a low coefficient of friction and silent operation without the need for frequent maintenance.

• Manufacturer Part Number: BNK008
• Front Sway Bar: 33mm (2-point adjustable)
• Rear Sway Bar: 20mm (3-point adjustable)
• Heavy-duty end links with steel ball joints and 25mm adjustment range
• DIY lateral locks prevent sideways bar movement under cornering loads
• Protective E-coat and powder coating for long-term corrosion resistance
• Synthetic elastomer bushings with PTFE lining and internal bore knurling
• Forged ends for maximum strength at mounting points
• Includes all necessary mounting hardware and installation guide