Fits 1994-1998 Dodge Ram 2500 and 3500 trucks (5.9L 12V Cummins).

Increase the fueling potential of your P-pumped Cummins with the DDP Upgraded Delivery Valve Set. These valves are engineered specifically for the Bosch P-7100 injection pump, replacing the restrictive factory delivery valves to allow for increased fuel volume and longer injection duration. This is a critical upgrade for enthusiasts looking to support larger injectors and higher horsepower levels while improving overall throttle response.

• Fits Bosch P-7100 injection pumps
• Designed for 12-valve 5.9L Cummins engines
• Enhances fuel flow and injection duration
• Direct replacement for factory delivery valves
• Complete matched set

Fits 1994-1998 Dodge Ram 2500 and 3500 models equipped with the 5.9L 12-valve Cummins engine and Bosch P7100 injection pump.

The BD Diesel 3000 RPM Governor Spring Kit is designed to overcome the factory defueling limits of the Bosch P7100 mechanical injection pump. By replacing the original governor springs, this kit enables your Cummins engine to maintain fueling up to 3,000 RPM. This modification significantly improves mid-to-high-end throttle response and provides a broader power band, reducing the need for premature gear shifts during towing or performance driving.

• Increases usable engine speed to 3,000 RPM for improved horsepower levels
• Enhances throttle response across the entire RPM range
• Optimizes pump output without requiring replacement plungers or barrels
• Designed specifically for the P7100 Bosch mechanical injection pump
• Manufacturer Part Number: 1040187
• Warranty: 12-Month / 12,000-Mile

Technical Note: This kit involves precise internal modifications to the fuel injection pump. Installation must be performed by a trained, qualified P7100 technician. Improper installation can result in engine damage, excessive heat/smoke, or poor engine performance.

Ensure the integrity of your water-methanol injection system with the Snow Performance SNO-820-BRD 20-foot braided stainless steel line. Engineered specifically for high-pressure delivery, this 4AN hose features a specialized EPDM inner liner that is 100% methanol resistant, preventing the swelling and degradation common with standard rubber lines.

The exterior is finished in a durable black stainless steel braid, providing superior abrasion resistance and a clean, stealthy appearance in the engine bay or chassis. At 20 feet in length, this line is ideal for plumbing trunk-mounted tanks or full-length chassis runs.

• Manufacturer Part Number: SNO-820-BRD
• Length: 20 Feet
• Fitting Size: 4AN
• Construction: Black Braided Stainless Steel exterior
• Liner Material: 100% Methanol Resistant EPDM

The Snow Performance SNO-815-BRD is a premium 15ft braided stainless steel line designed for high-pressure fluid transfer in water-methanol or nitrous injection systems. This "NX Version" features a sleek black protective coating over the stainless braid, offering a professional, stealthy appearance under the hood or along the chassis while providing superior abrasion resistance.

Equipped with pre-crimped -4AN fittings on both ends, this line ensures a secure, leak-free connection capable of withstanding the high PSI demands of performance injection systems. The 15ft length is ideal for plumbing systems from a rear-mounted reservoir to the engine bay. The internal liner is compatible with water, methanol, and nitrous, ensuring long-term durability without degradation.

• Part Number: SNO-815-BRD
• Length: 15 Feet
• Material: Braided Stainless Steel
• Finish: Black Coating
• Fitting Size: -4AN
• High-pressure rated for water-meth and nitrous applications

Ensure a secure, leak-free connection for your injection system with Snow Performance 20ft Black High Temp Nylon Tubing. Engineered to handle the specific demands of high-pressure water-meth delivery, this 1/4" OD line is 100% methanol resistant, ensuring it won't degrade or become brittle when running high-concentration mixtures.

This high-temperature nylon tubing is designed for easy routing through the engine bay and is compatible with all water-methanol injection kits that utilize standard 1/4" quick-connect fittings. Whether you are replacing a worn line or plumbing a new installation, this SNO-8088 tubing provides the chemical resistance and thermal stability required for performance applications.

• Length: 20 Feet
• Diameter: 1/4" OD
• Material: High-temperature nylon
• Chemical Resistance: 100% methanol resistant
• Fitment: Compatible with 1/4" quick-connect fittings
• Manufacturer Part Number: SNO-8088

Ensure the integrity of your water-methanol injection system with this 20-foot roll of Snow Performance High Temp Nylon Tubing (SNO-8087). Engineered specifically for the demanding environment of performance fueling, this 1/4-inch OD tubing is 100% methanol resistant and designed to withstand high under-hood temperatures without degrading or becoming brittle.

• Manufacturer Part Number: SNO-8087
• Length: 20 Feet
• Diameter: 1/4-inch
• Color: Red
• Material: High-temperature resistant Nylon
• Compatibility: All water-methanol injection kits using 1/4" quick-connect fittings
• Chemical Resistance: 100% methanol resistant

This tubing provides a reliable, leak-free connection when used with standard quick-connect fittings, making it an essential component for custom plumbing or replacing worn lines in your injection setup.

Upgrade your water-methanol injection system with this heavy-duty Snow Performance 1-foot braided line. Engineered for durability and high-pressure performance, this line features a black-finished stainless steel exterior that protects against abrasion and engine bay heat. Unlike standard nylon tubing, the EPDM inner core is 100% methanol resistant, ensuring long-term reliability without degradation or leaks.

This line comes pre-terminated with high-quality 4AN fittings to provide a secure, mechanical connection to your pump, solenoid, or nozzle holder. It is an ideal solution for short-run plumbing where maximum protection and a professional look are required.

• Length: 1 foot (1')
• Fitting Type: 4AN
• Core Material: Methanol-resistant EPDM
• Reinforcement: Stainless steel braid
• Finish: Black
• 100% Methanol Resistant
• Manufacturer Part Number: SNO-805-BRD

Upgrade your water-methanol injection system with this Snow Performance 2-foot stainless steel braided line. Designed for high-pressure performance, this line features an internal EPDM core that is 100% methanol resistant, preventing the degradation commonly found in standard rubber hoses. The black-coated stainless steel braiding provides superior abrasion resistance and a professional, stealthy aesthetic in the engine bay.

This line comes pre-terminated with 4AN fittings to provide a secure, leak-free connection that is significantly more durable than traditional push-to-connect plastic lines, especially in high-vibration or high-heat environments. It is compatible with all Snow Performance kits and other water-meth systems utilizing 4AN hardware.

• Length: 2 Feet
• Material: Stainless Steel Braid with EPDM Inner Core
• Resistance: 100% Methanol Resistant
• Fittings: 4AN Female Ends
• Finish: Black
• Manufacturer Part Number: SNO-801-BRD

The Snow Performance SNO-800-BRD is a premium 5-foot stainless steel braided line specifically engineered for high-performance water-methanol injection systems. Featuring a durable EPDM inner core, this line is 100% methanol resistant, preventing the swelling or degradation often encountered with standard rubber hoses when exposed to high-concentration methanol mixtures.

Constructed to withstand high-pressure demands and harsh engine bay environments, the stainless steel outer braid provides superior abrasion resistance and heat shielding. The black finish and 4AN fittings ensure a clean, professional appearance and secure, leak-free integration into your existing injection plumbing.

• Manufacturer Part Number: SNO-800-BRD
• Length: 5 Feet
• Fitting Size: 4AN
• Core Material: EPDM (100% Methanol Resistant)
• Outer Material: Braided Stainless Steel
• Finish: Black

The Snow Performance SNO-40040-BRD Dual Nozzle Upgrade allows you to expand your existing water-methanol injection system to a two-nozzle configuration. This upgrade is essential for high-horsepower applications requiring greater fluid volume or for setups where dual-point injection—such as before a turbo and at the throttle body—is required for optimal cooling and detonation control.

This kit is specifically designed for systems utilizing 4AN stainless steel braided lines, providing a secure, high-pressure connection that resists engine bay heat and abrasion far better than standard nylon tubing. It includes the necessary 4AN T-fittings and plumbing to seamlessly integrate a second nozzle holder into your current system.

• Allows for dual-nozzle water-methanol injection configurations
• Includes high-strength 4AN stainless steel braided line and fittings
• Compatible with Snow Performance 4AN braided line kits
• Provides superior durability and heat resistance over standard nylon lines
• Manufacturer Part Number: SNO-40040-BRD
• Note: Water-methanol nozzle is not included and must be purchased separately

The Snow Performance SNO-40012-BRD Trunk Mount Upgrade provides the specialized components required to relocate a standard 3QT reservoir or custom water-methanol tank to the vehicle's trunk. This upgrade replaces standard nylon tubing with 15 feet of 4AN braided stainless steel line, offering superior protection against abrasion and heat while ensuring a secure, leak-free connection across the length of the chassis.

Relocating a reservoir below the level of the injection nozzle creates a risk of siphoning; this kit solves that issue by including a high-flow solenoid. This solenoid acts as a positive shut-off valve, preventing fluid flow whenever the system is not actively injecting. This kit is designed for universal application and provides a professional-grade plumbing solution for any rear-mount water-meth configuration.

• 15 feet of 4AN braided stainless steel line
• High-flow water-methanol solenoid for positive shut-off
• Complete set of required AN fittings and adapters
• Designed for Snow Performance 3QT and custom reservoirs
• Manufacturer Part Number: SNO-40012-BRD

The Snow 8AN Braided Stainless Steel PTFE Hose (SNF-60815B) is engineered for high-pressure fluid systems requiring maximum durability and chemical compatibility. The PTFE (Polytetrafluoroethylene) inner liner is highly resistant to degradation from aggressive fluids and high operating temperatures, ensuring long-term reliability where standard rubber lines often fail.

Constructed with a heavy-duty stainless steel outer braid, this hose provides exceptional protection against abrasion and prevents hose expansion under high pressure. The black finish offers a sleek, professional appearance for custom plumbing layouts. At 15 feet in length, it provides ample material for plumbing fuel, oil, or coolant systems across various vehicle platforms.

• Manufacturer Part Number: SNF-60815B
• Size: 8AN
• Length: 15 Feet
• Inner Liner: PTFE (Teflon)
• Outer Reinforcement: Braided Stainless Steel
• Finish: Black

Ensure reliable fuel delivery and maximum durability with the Snow Performance 8AN Braided Stainless Fuel Line Kit. Engineered for high-performance applications, this kit (part number SNF-60801B) provides a robust solution for plumbing your fuel system with components designed to withstand high operating pressures and harsh engine bay environments.

The braided stainless steel construction offers superior protection against abrasion and hose expansion, ensuring consistent flow under demand. Finished in a sleek black coating, this kit provides a professional, understated aesthetic while maintaining the strength of traditional stainless lines. It is an essential upgrade for builders moving beyond standard rubber lines to a more resilient 8AN architecture.

• Manufacturer Part Number: SNF-60801B
• Hose Size: 8AN
• Construction: Braided stainless steel for high-pressure integrity
• Finish: Stealth black outer coating
• Compatibility: Designed for use with 8AN fuel system components

The Snow Performance SNF-60001B 10AN fuel line kit provides a professional-grade plumbing solution for high-demand fuel and water-methanol injection systems. Engineered to handle high-pressure environments, this kit utilizes braided stainless steel for maximum hose integrity and resistance to expansion under load.

The black-coated finish offers a stealthy, clean aesthetic while providing an additional layer of protection against abrasion and engine bay heat. This kit is designed for builders who require the reliability of AN-style fittings and the durability of stainless steel plumbing for consistent fluid delivery.

• Manufacturer Part Number: SNF-60001B
• Line Size: -10AN
• Material: Braided stainless steel
• Finish: Black outer coating
• Application: Compatible with high-pressure fuel and water-methanol injection systems

Upgrade your mechanical fueling system with the Industrial Injection Cummins VE Injection Pump Fuel Pin and Governor Spring kit (MPN 231601). This performance duo is engineered for Bosch VE rotary pumps to optimize fuel delivery and extend the usable powerband of your diesel engine.

The fuel pin features a precision-ground profile that allows the fueling diaphragm to travel further under boost, delivering a more aggressive fuel curve and increased low-end torque. Paired with the heavy-duty governor spring, this kit allows the engine to rev safely beyond the restrictive factory limit, preventing early de-fueling and improving throttle response across the entire RPM range.

• Precision-Ground Ramp: Contoured pin profile increases AFC (Aneroid Fuel Control) travel for maximum fueling under boost.
• Extended Powerband: High-performance governor spring increases maximum engine RPM before the pump begins to de-fuel.
• Durable Construction: Components manufactured to withstand high-stress fuel system environments.
• System Compatibility: Fits Bosch VE rotary style injection pumps found on Cummins engines.
• Manufacturer Part Number: 231601

Fits 1994-1998 Dodge Cummins 5.9L 12V trucks equipped with the Bosch P7100 injection pump.

The DDP 34KGSK Governor Spring Kit is a vital upgrade for 12V Cummins owners looking to extend their engine's usable power band. From the factory, these injection pumps are governed to start defueling as early as 2,200-2,400 RPM, which can limit performance during heavy towing or spirited driving. This kit allows you to maintain fuel delivery and pull significantly harder through the RPM range.

This comprehensive kit provides the components required to configure your pump for either 3,000 RPM or 4,000 RPM operation. By replacing the stock governor springs with these precision-calibrated units, you gain better throttle response and the ability to utilize the full potential of your mechanical P-Pump fueling system.

• Expands usable RPM range up to 3,000 or 4,000 RPM
• Prevents premature defueling for consistent top-end power
• Specifically designed for the Bosch P7100 "P-Pump"
• Improves engine responsiveness and drivability
• Manufacturer Part Number: DDP 34KGSK

Note: High-rev applications may require upgraded valve springs to prevent valve float.

Fits 1998-2002 Dodge Ram 2500 and 3500 trucks equipped with the 5.9L 24-valve Cummins engine.

The BD Diesel ISB Injector Seal Kit provides the critical components necessary to reseal your fuel injectors during routine service or when troubleshooting combustion blow-by. Maintaining a gas-tight seal at the injector is essential for consistent fuel delivery and engine performance. This kit replaces aged or heat-cycled factory seals with precision-fit components designed specifically for the 24-valve ISB platform, ensuring a reliable interface between the injector and the cylinder head.

• Complete seal kit for ISB fuel injectors
• Engineered for the 5.9L 24-valve Cummins engine
• Prevents leaks and maintains fuel system integrity
• Manufacturer Part Number: 1075800
• Includes 12-month or 12,000-mile warranty

Fits 2017-2024 Chevrolet Silverado and GMC Sierra 2500 HD/3500 HD trucks equipped with the L5P Duramax engine.

The BD Diesel 1050458 Injector Connector Pigtail Kit provides a reliable solution for repairing or replacing damaged factory injector connectors. Constant heat cycles and engine vibration often lead to brittle plastic and compromised electrical connections on the OE harness. This kit replaces those worn components to restore proper injector signal and prevent engine misfires.

Each pigtail features an 8-inch wire length to ensure adequate slack for routing and strain relief. Designed as an exact fit for the L5P platform, this kit includes heat-shrink butt connectors to create a weather-sealed, durable splice into your existing harness.

• Direct replacement for L5P Duramax fuel injector connectors
• 8-inch wire leads for flexible installation
• Includes 8 heat-shrink butt connectors for a secure seal
• Complete 4-pack for servicing multiple cylinders
• Manufacturer Part Number: 1050458

Fits select 2017-2024 Chevrolet Silverado and GMC Sierra 2500 HD and 3500 HD models equipped with the 6.6L L5P Duramax engine.

The BD Diesel Injector Connector Pigtail Kit provides a reliable, cost-effective solution for repairing damaged, melted, or corroded fuel injector wiring. Instead of replacing a costly entire engine wiring harness, this kit allows you to splice in a new, high-quality connector to restore proper electrical contact and fuel system performance. This 8-inch pigtail is an exact fit for the L5P platform, ensuring a secure connection to the factory injector.

• 8-inch lead length provides ample room for splicing into the factory harness
• Includes two adhesive-lined heat shrink butt connectors for a weather-sealed, vibration-resistant repair
• Engineered for an exact fit to factory L5P fuel injectors
• High-quality wire and connector housing for long-term durability in high-heat engine bays
• Manufacturer Part Number: 1050457

Fits 2011-2021 Ford F-250 and F-350 Super Duty (6.7L).

Maintain the integrity of your high-pressure fuel system with the BD Diesel 1050165 Fuel Injector Line Kit. Designed as a direct replacement for Ford 6.7L Power Stroke engines, these fuel injector feed lines are precision-engineered to meet factory specifications. Unlike generic lines that may require manual bending or adjustment, these units are preformed for an exact fit, ensuring a leak-free seal and reliable fuel delivery to your injectors.

Constructed for durability and long-term service, these lines feature a corrosion-resistant finish to withstand the harsh environment of a diesel engine bay. This comprehensive kit includes a full set of hold-down bolts to ensure a complete and secure installation.

• Replaces OE Part Numbers: BC3Z-9229-A, BC3Z-9229-B
• Preformed to correct factory specifications for an exact fit
• No bending or adjustment required during installation
• Includes a full set of replacement hold-down bolts
• Corrosion-resistant finish for extended service life
• Manufacturer Part Number: 1050165

Fits select 2006-2007 Dodge Ram 2500 and 3500 (5.9L Cummins).

The BD Diesel Common Rail Injector Installation Kit (MPN 1050156) is a comprehensive solution for diesel technicians and DIY owners performing an injector service. High-pressure fuel systems on the 5.9L Cummins are highly sensitive to contamination and sealing issues; reusing worn injection lines or supply tubes often leads to persistent leaks or premature injector failure. This all-in-one kit eliminates that risk by providing the critical delivery components needed for a professional install.

This kit features genuine Bosch fuel injector supply tubes (connector tubes) and BD Diesel’s precision OEM-fit fuel lines, ensuring every connection meets strict factory tolerances. Whether you are installing stock or performance injectors, this kit simplifies the process by bundling all required sealing hardware and delivery lines into a single package.

• Includes 6 genuine Bosch fuel injector supply tubes
• Includes BD Diesel OEM-fit high-pressure fuel lines
• Includes all necessary gaskets for the 5.9L Cummins injector installation
• Protects new injectors by replacing potentially contaminated or worn supply lines
• Manufacturer Part Number: 1050156

Fits 1994-1998 Dodge Ram 2500 and 3500 Base models equipped with the 12-valve Cummins engine and Bosch P7100 injection pump.

The BD Diesel 4000 RPM Governor Spring Kit (MPN: 1040185) is engineered to unlock the potential of your P7100-equipped Cummins. By increasing the governed engine speed to 4000 RPM, this kit significantly improves mid-to-high-end throttle response and enables higher horsepower levels. This upgrade reduces the need for frequent gear shifting during heavy towing or racing applications, ensuring the engine stays in the power band longer.

This modification requires technical expertise. Due to the precision required for Bosch P7100 pump adjustments, installation must be performed by a qualified pump technician to prevent engine damage or poor performance. Note: If you have not already installed 60lb exhaust valve springs, they are required for safe operation at these engine speeds.

• Increases governor limit to 4000 RPM
• Enhances throttle response across the entire power band
• Includes intake valve springs
• Compatible with Bosch P7100 mechanical injection pumps
• Manufacturer Part Number: 1040185
• Warranty: 12-month or 12,000-mile limited warranty