Fits 2015-2017 Subaru WRX.

The Cobb NexGen Stage 2 + CAN Flex Fuel Redline Carbon Fiber Power Package provides a complete performance ecosystem for the VA chassis WRX. This comprehensive kit integrates high-flow induction with advanced fuel management, allowing your vehicle to dynamically adjust to any ethanol blend via the CAN-bus Flex Fuel system. The inclusion of Redline series carbon fiber components ensures superior heat management and a refined engine bay aesthetic, while the NexGen Stage 2 calibration delivers optimized boost control and fueling for significant power gains over stock.

• NexGen Stage 2 tuning profile for balanced, reliable performance
• CAN-based Flex Fuel hardware for seamless E85 and gasoline transitions
• Premium Redline Carbon Fiber intake components with high-quality matte black finish
• Complete system including Accessport compatibility and necessary installation hardware
• Manufacturer Part Number: SUB004NG2W-BK1FF-RED

Fits 2015-2021 Subaru WRX.

The NexGen Stage 2 Redline Carbon Fiber Power Package provides a coordinated performance upgrade for the VA-chassis WRX, combining increased airflow with precision engine management. This kit centers on the Accessport V3, the most flexible ECU tuning solution available, pre-loaded with NexGen Stage 2 calibrations. By pairing the tuning device with the Redline Carbon Fiber Intake, this package optimizes the air-fuel ratio and boost pressure to deliver consistent power gains across the entire RPM range.

The included Redline intake features a premium 2x2 weave carbon fiber construction with a high-gloss finish, offering both weight reduction and superior engine bay aesthetics. This system replaces the restrictive factory airbox to improve turbocharger spool-up and induction acoustics. Every component is engineered for a direct-fit installation using factory mounting points.

• Accessport V3 with NexGen Stage 2 off-the-shelf maps
• Redline Carbon Fiber Intake with high-gloss finish
• Black anodized hardware and brackets
• High-flow reusable air filter
• Direct-fit installation with no permanent vehicle modifications required
• Manufacturer Part Number: SUB004NG2W-BK-RED

Fits 2018-2021 Subaru STI and 2018 Type RA.

The Cobb NexGen Stage 2 Power Package provides a comprehensive, emissions-compliant performance upgrade for the EJ25 engine. This kit replaces legacy Stage 2 configurations with updated hardware and calibrations designed to work within modern environmental standards while still delivering significant gains in horsepower and torque. By combining engineered hardware with optimized ECU mapping, this package improves throttle response and overall engine efficiency for a more capable driving experience.

• Complete NexGen Stage 2 performance solution for the 2.5L EJ engine
• Compatible with 2018-2021 Subaru STI and 2018 Type RA models
• Engineered for power gains while maintaining emissions compliance
• Durable hardware components featuring a Blue finish
• Designed for straightforward bolt-on installation
• Manufacturer Part Number: SUB004NG2S2-BL

Fits 2018 Subaru WRX STI Type RA and 2019-2021 Subaru WRX STI.

The Cobb NexGen Stage 2 Power Package is a complete performance solution engineered to provide significant power gains while maintaining emissions compliance. This kit bridges the gap between basic intake upgrades and full bolt-on configurations by combining the industry-standard Accessport V3 with high-efficiency hardware. By optimizing the EJ25's air-fuel ratios and boost control through the NexGen calibration, this package delivers a substantial increase in torque and horsepower across the entire RPM range.

• Accessport V3: The world's best-selling, most flexible ECU tuning solution for Subaru, pre-loaded with Stage 2 NexGen maps.
• NexGen Stage 2 Hardware: Includes high-flow intake components designed to reduce induction restriction and improve turbo spool.
• Sleek Aesthetics: Components feature a durable black finish for a clean, professional look under the hood.
• Installation Ready: Includes all necessary brackets, hardware, and instructions for a bolt-on installation to factory mounting points.
• Reliability: Calibrations are extensively tested to ensure engine safety and consistent performance in various driving conditions.
• Manufacturer Part Number: SUB004NG2S2-BK

Fits 2018-2021 Subaru WRX.

The Cobb Stage 1+ CAN Flex Fuel Power Package is a comprehensive tuning solution designed to unlock the performance potential of the FA20DIT engine by enabling the use of E85 fuel. This kit integrates the Cobb SF Intake system with CAN-based Flex Fuel hardware, allowing your WRX to automatically adjust its calibration based on the ethanol content in the fuel lines. By utilizing the CAN bus for data transmission, this system provides faster and more reliable sensor data directly to the Accessport V3, providing a seamless transition between gasoline and ethanol blends without manual map switching.

• Cobb Accessport V3 for ECU flashing and real-time sensor monitoring
• Cobb SF Intake with high-flow filter and custom MAF sensor housing for improved airflow
• CAN-based Flex Fuel hardware for precise ethanol content sensing via the factory CAN bus
• Designed to bolt to factory mounting points with plug-and-play wiring harnesses
• Supports various fuel blends from 91-octane gasoline to E85
• Manufacturer Part Number: SUB0041W1P-2FF

Fits 2015-2017 Subaru WRX.

The Cobb Stage 1+ CAN Flex Fuel Power Package provides a complete, digital tuning solution for the FA20-powered WRX, allowing the engine to seamlessly adjust for ethanol content in real time. This kit eliminates the need for manual map switching, providing the freedom to run E85, 91/93 octane, or any blend in between while maximizing power through increased airflow and precise fuel delivery.

• SF Intake System: Includes a CAD-designed air box and high-flow filter to reduce intake restriction and protect against engine bay heat soak.
• CAN Flex Fuel Kit: Utilizes the digital CAN bus for high-speed ethanol content reporting to the ECU, ensuring accurate ignition timing and fueling adjustments.
• Complete Integration: Engineered to work as a unified system for consistent driveability and performance gains.
• Installation: Designed as a direct bolt-on upgrade using factory-style connectors for a reliable, reversible installation.
• Manufacturer Part Number: SUB0041W1P-1FF

Fits 2015-2021 Subaru WRX models.

The Cobb Stage1+ SF Power Package is a complete performance solution that combines the industry-leading Accessport V3 with the SF Intake system and Airbox. This package is engineered to deliver a calibrated power increase by optimizing the ECU to handle the increased airflow provided by the high-induction intake. By refining air-fuel ratios and ignition timing, this kit provides consistent power gains, improved throttle response, and a more aggressive induction sound over the factory setup.

• Accessport V3: The premier handheld ECU tuning device featuring a high-resolution color screen and the ability to monitor up to six parameters in real-time.
• SF Intake & Airbox: High-flow intake system utilizing a custom airbox to shield the filter from radiant engine heat, ensuring cooler intake air temperatures (IATs).
• Stage 1+ Calibration: Includes pre-loaded Off-The-Shelf (OTS) maps specifically designed for the SF Intake system.
• Direct Fitment: Bolts to factory mounting points with no permanent vehicle modifications required.
• Manufacturer Part Number: SUB0041W1P

Fits 2015-2021 Subaru WRX.

The Cobb Stage 1+ Redline Carbon Fiber Power Package is an engineered performance solution designed to optimize the FA20DIT engine's output through improved airflow and precision electronic calibration. This package centers around the industry-standard Accessport V3 and the premium Redline Carbon Fiber Intake system, providing a comprehensive power upgrade that maintains factory-like reliability and fitment.

• Accessport V3: The world's best-selling, most flexible ECU upgrade solution for Subaru, pre-loaded with Stage 1+ Off-The-Shelf (OTS) maps specifically calibrated for this hardware.
• Redline Carbon Fiber Intake: Constructed from high-quality 2x2 weave carbon fiber with a high-gloss finish, this intake reduces weight and provides superior heat soak resistance compared to plastic or aluminum alternatives.
• High-Flow Air Filter: A washable, reusable cotton gauze filter element increases surface area for improved flow while maintaining filtration efficiency.
• Complete Hardware Kit: Includes all necessary brackets, couplers, and stainless steel hardware for a clean, bolt-on installation using factory mounting points.
• Manufacturer Part Number: SUB0040W1P-RED

Fits select 2018-2021 Subaru models.

The Cobb Stage 1+ CAN Flex Fuel Redline Carbon Fiber Power Package provides a complete, high-performance tuning solution designed to unlock the power potential of your Subaru. This comprehensive kit combines the superior airflow of the Redline Carbon Fiber intake system with the versatility of a CAN-based Flex Fuel sensor kit, allowing the ECU to adjust for ethanol content in real time. The included Accessport delivers the required calibration to manage these hardware upgrades safely and effectively.

• Redline Carbon Fiber Intake: Features a high-quality carbon fiber construction for reduced weight and heat soak, providing a direct path for increased airflow to the turbocharger.
• CAN Flex Fuel Sensor Kit: Enables seamless switching between gasoline and E85 by monitoring ethanol content and communicating directly with the Accessport tuning.
• Integrated Tuning: Includes the industry-standard Accessport for easy map loading and engine monitoring.
• Manufacturer Part Number: SUB0040W1P-2FF-RED
• Hardware Included: Carbon fiber intake box, high-flow filter, CAN flex fuel sensor, digital fuel pressure sensor, and necessary wiring/plumbing components.

The Cobb Stage 1+ CAN Flex Fuel Redline Carbon Fiber Power Package is a complete performance solution for 2015-2017 Subaru models, designed to unlock the power potential of ethanol while maintaining a premium engine bay aesthetic. This kit allows your vehicle to run on gasoline, E85, or any blend in between by utilizing a digital ethanol sensor that communicates directly with the ECU via the CAN bus.

• Accessport V3: The world's best-selling, most flexible ECU tuning solution for Subaru, pre-loaded with optimized Stage 1+ Flex Fuel calibrations.
• Redline Carbon Fiber Intake: A high-flow induction system featuring handcrafted carbon fiber construction for reduced weight and improved thermal management.
• CAN Flex Fuel Hardware: Includes the ethanol sensor, fuel pressure sensor, and vehicle-specific harness for seamless integration.
• Installation: Engineered as a direct bolt-on upgrade that integrates with factory mounting points and fuel lines.

This package provides a significant increase in horsepower and torque by optimizing timing and fueling for high-octane ethanol blends without the need for manual map switching. Manufacturer Part Number: SUB0040W1P-1FF-RED.

Fits the 2018 Subaru WRX STI.

The Cobb Stage 1+ Power Package is a comprehensive entry-level tuning solution designed to increase horsepower and torque by optimizing engine calibration and improving induction efficiency. This kit combines the industry-leading Accessport V3 with the SF Intake and Airbox system to provide a significant performance step over stock without requiring internal engine modifications.

• Cobb Accessport V3: The premier handheld ECU flashing and monitoring device, pre-loaded with Stage 1+ off-the-shelf (OTS) calibrations specifically for the 2018 STI.
• SF Intake System: High-flow intake design that increases airflow while providing a more aggressive induction sound.
• Custom Airbox: Included airbox housing helps isolate the intake filter from engine bay heat, ensuring lower intake air temperatures.
• Cobb Blue Finish: Features the signature Cobb Blue coloring on the intake components for a distinct engine bay aesthetic.
• Manufacturer Part Number: SUB0040S1P-BL

Fits the 2018 Subaru WRX STI.

The Cobb Stage 1+ Power Package provides a calibrated performance solution for the 2018 Subaru WRX STI, combining advanced engine management with a high-flow induction system. This package is engineered to replace the restrictive factory airbox and conservative engine mapping, allowing for improved airflow and optimized power delivery. The system includes the Accessport V3 and a matching intake system finished in black for a discreet, factory-plus look under the hood.

• Accessport V3 handheld tuner for ECU flashing and live data monitoring
• High-flow SF Intake system improves induction efficiency and sound
• Integrated airbox and black intake tube for heat management and aesthetics
• Pre-loaded with calibrated off-the-shelf (OTS) maps for plug-and-play performance
• Direct bolt-on installation using factory mounting points
• Manufacturer Part Number: SUB0040S1P-BK

Fits 2011-2014 Subaru WRX models.

The Cobb Stage 2+ NexGen Flex Fuel Power Package provides a comprehensive tuning and fueling solution designed to maximize the performance of your Subaru WRX. This kit utilizes NexGen technology to allow your vehicle to seamlessly transition between gasoline, E85, or any blend of the two, with the ECU adjusting parameters in real-time for optimal power and safety.

This package includes the necessary hardware to upgrade your fuel system and intake to Stage 2+ specifications, finished with blue accents for a customized engine bay appearance. By integrating Flex Fuel capability, you can take full advantage of the high-octane properties of ethanol without the need to manually switch maps between fill-ups.

• Manufacturer Part Number: SUB003NG2S2FF-BL
• NexGen Flex Fuel technology for automatic ethanol content adjustment
• Blue color-themed components
• Engineered for 2011-2014 WRX fuel system requirements
• Complete Stage 2+ power upgrade path

Fits 2011-2014 Subaru WRX models.

The Cobb NexGen Stage 2+ Flex Fuel Power Package provides a comprehensive tuning solution for owners looking to maximize the performance of their EJ-series engine while maintaining modern compliance standards. This kit enables your WRX to utilize E85 ethanol blends, gasoline, or any mixture of the two, with the ECU automatically adjusting parameters in real-time via the included Accessport V3.

This Stage 2+ system combines critical fueling hardware with the Cobb SF Intake and Airbox, finished in black for a stealthy engine bay aesthetic. By monitoring ethanol content, the NexGen Flex Fuel sensor allows the ECU to optimize ignition timing and fuel delivery, unlocking the significant power and cooling benefits of ethanol without the need for manual map switching.

• Accessport V3: The premier handheld tuning and monitoring device for the Subaru platform.
• NexGen Flex Fuel Kit: Real-time ethanol content monitoring for seamless fuel transitions.
• SF Intake & Airbox (Black): Increased airflow capacity and improved induction sound with a sealed airbox to mitigate heat soak.
• Fueling Upgrades: Included components to support the higher volume requirements of ethanol combustion.
• Manufacturer Part Number: SUB003NG2S2FF-BK

Fits 2008-2014 Subaru WRX STI.

The Cobb NexGen Stage 2+ Flex Fuel Power Package Upgrade provides the necessary hardware to bridge the gap for vehicles currently equipped with a Stage 1 setup. This package facilitates the transition to a full NexGen Stage 2+ Flex Fuel configuration, allowing your STI to utilize ethanol-blended fuels for increased power and improved thermal efficiency. As part of the NexGen series, these components are engineered to provide significant performance gains while maintaining compliance with modern tuning standards.

• Manufacturer Part Number: SUB003NG2S1FF-S1-UP-BL
• Designed as a direct upgrade path from Stage 1 to Stage 2+ Flex Fuel
• Enables E85/Flex Fuel compatibility when used with appropriate tuning
• Includes blue anodized components for a distinct engine bay aesthetic
• Engineered for the 2008-2014 Subaru WRX STI EJ25 platform

Fits 2008-2014 Subaru WRX STI.

The Cobb NexGen Stage 2+ Flex Fuel Power Package is designed for enthusiasts already running a Stage 1 configuration who are ready to transition to the power and versatility of E85. This upgrade path provides the critical hardware needed to monitor and adjust for ethanol content in real-time, allowing your STI to safely maximize timing and boost when higher octane fuel is detected. By moving to the NexGen Stage 2+ level, you gain a comprehensive solution for increased output while maintaining the drivability and component integration Cobb is known for.

• Complete upgrade path from Stage 1 to NexGen Stage 2+ Flex Fuel
• Enables real-time fuel blending between 91/93 octane gasoline and E85
• Durable black finish on applicable kit components
• Designed for seamless integration with the Cobb Accessport
• Manufacturer Part Number: SUB003NG2S1FF-S1-UP-BK

Fits 2008-2014 Subaru WRX STI.

The Cobb NexGen Stage 2+ Flex Fuel Power Package (SUB003NG2S1FF-BL) provides a comprehensive tuning and hardware solution to optimize the EJ25 engine for both pump gas and ethanol blends. This system centers on the Accessport V3, delivering a calibrated path to increased performance by managing a high-flow induction system and a robust fuel delivery overhaul. With the included flex fuel sensor, the ECU can monitor ethanol content in real-time and automatically adjust timing and fueling parameters for maximum efficiency and power.

• Accessport V3: The primary tuning interface pre-loaded with NexGen Stage 2+ Flex Fuel maps.
• High-Flow Fuel Components: Includes upgraded fuel injectors, a high-volume fuel pump, and blue anodized fuel rails to meet the high-flow requirements of E85.
• Flex Fuel Sensor Kit: Allows for seamless switching between gasoline and E85 without manual map changes.
• SF Intake System: Improves airflow to the turbocharger and adds a distinct induction sound.
• Complete Hardware Kit: Includes all necessary fuel lines, fittings, and adapters for a secure installation.

Manufacturer Part Number: SUB003NG2S1FF-BL

Fits 2008-2014 Subaru WRX STI.

The Cobb NexGen Stage 2+ Flex Fuel Power Package (SUB003NG2S1FF-BK) is a total engine management and hardware solution that enables your EJ25-powered STI to run on gasoline, E85, or any blend in between. This NexGen system is engineered to provide the high-output performance of a Stage 2+ setup while maintaining compatibility with modern tuning standards. By integrating flex fuel capability, you can take advantage of the higher knock resistance and cooling properties of ethanol to significantly increase power and torque.

• Dynamic Calibration: Includes the Accessport V3 handheld tuner with pre-loaded NexGen Stage 2+ Flex Fuel maps for instant power delivery.
• Flex Fuel Integration: Seamlessly monitors ethanol content and adjusts ignition timing and fuel flow in real-time.
• Black Finish: Hardware components feature a durable black finish for a clean, professional appearance in the engine bay.
• Complete System Design: Replaces factory intake and fuel system bottlenecks with high-flow components designed for the increased demands of E85.
• MPN: SUB003NG2S1FF-BK

Fits 2008-2014 Subaru WRX STI.

The Cobb NexGen Stage 2 Power Package is a complete, engineered performance solution for the GR and GV chassis STI. This package integrates the Accessport V3 with NexGen-series hardware to optimize the EJ257 engine's output, delivering increased horsepower and torque while maintaining component reliability and drivability. By combining specific hardware upgrades with calibrated ECU mapping, Cobb ensures your Subaru performs at its peak with a blue aesthetic finish for the engine bay.

• Accessport V3 provides easy ECU flashing, gauge monitoring, and data logging
• NexGen series components designed for optimized airflow and fuel management
• Blue finish coordinates with factory or aftermarket styling
• Pre-loaded with off-the-shelf (OTS) maps for plug-and-play performance
• Complete hardware and software integration for consistent results
• Manufacturer Part Number: SUB003NG2S1-BL

Fits 2008-2014 Subaru WRX STI.

The Cobb NexGen Stage 2 Power Package provides a comprehensive, calibrated performance upgrade path for the 2008-2014 Subaru STI. This package is designed to increase power and torque across the RPM range by combining high-flow hardware with precision ECU tuning. The NexGen designation represents a modern approach to performance, ensuring the components work in harmony with the vehicle's factory systems while delivering significant gains in throttle response and overall driveability.

• Manufacturer Part Number: SUB003NG2S1-BK
• Series: NexGen Stage 2 Power Package
• Compatible with 2008-2014 Subaru WRX STI models
• Includes necessary hardware and software for a complete Stage 2 calibration
• Sleek black finish on performance hardware components
• Engineered for consistent power delivery and improved engine efficiency

The Cobb SF Intake System and Airbox offers a significant upgrade over the restrictive factory induction setup. By combining a high-flow blue conical filter with a custom-engineered airbox, this system increases airflow capacity while protecting the intake charge from performance-robbing engine bay heat. The integrated airbox is designed to seal against the hood or intake ducting, ensuring the engine pulls in cool, dense air rather than recycled heat from the radiator and engine block.

This kit improves throttle response and induction sound while maintaining a clean, professional look under the hood. It is a direct-fit solution that utilizes factory mounting points for a secure and straightforward installation.

• High-flow blue filter media for increased surface area and filtration efficiency
• Composite airbox design effectively shields the filter from ambient engine heat
• Improved induction acoustics and sharper throttle response
• Engineered for precise fitment and long-term durability
• Manufacturer Part Number: SUB00002IA-BL

The Cobb SF Intake System and Airbox for select Subaru vehicles provides a significant upgrade over the restrictive factory induction setup. By combining a high-flow filter with a dedicated airbox, this system ensures your engine receives a consistent supply of cool, dense air while protecting the intake tract from radiant engine bay heat.

Designed for precise fitment, the SF Intake utilizes custom-molded components and a CFD-optimized velocity stack to maintain laminar airflow into the turbocharger. The included airbox is finished in a sleek black to maintain a clean engine bay aesthetic while effectively reducing the intake noise levels often associated with open-filter designs. This kit includes all necessary hardware for a straightforward installation to factory mounting points.

• Integrated airbox isolates the filter from engine heat soak and debris
• CFD-designed velocity stack for optimized airflow and reduced turbulence
• High-flow, washable pleated cotton gauze filter element
• Durable black finish for a clean, professional appearance
• Complete bolt-on kit includes all required mounting hardware
• Manufacturer Part Number: SUB00002IA-BK

The Cobb Stage 1+ Power Package for the Nissan GT-R is a comprehensive tuning solution designed to optimize both engine output and drivetrain response. This package centers on the Accessport V3, providing a seamless interface for flashing the ECU and Transmission Control Module (TCM) with professionally calibrated performance maps.

• Accessport V3: The primary hardware for ECU/TCM flashing, allowing you to monitor engine vitals, read/clear trouble codes, and switch between maps.
• TCM Flashing: Specifically included in the NIS-006 package to refine transmission shift logic, improve shift speeds, and optimize launch control settings for better acceleration and drivability.
• Calibrated Performance: Engineered as a bolt-on solution that works with the vehicle's factory hardware or specific Stage 1+ supporting modifications to ensure safe, reliable power gains.
• Manufacturer Part Number: NIS006001P

Fits 2021-2022 Ford F-150 Raptor models. This comprehensive performance upgrade optimizes both air induction and thermal management to ensure consistent power delivery and improved engine efficiency.

The Cobb Stage 2 Power Package addresses the primary bottlenecks in the factory EcoBoost system. By combining a High-Flow HCT Intake with an upgraded Front Mount Intercooler (FMIC), this kit provides cooler, denser air to the engine while reducing intake restrictions. The included FMIC features a durable silver finish, offering superior heat rejection over the stock unit and resisting heat soak during heavy towing or high-load off-road driving. Each component is engineered to bolt into factory locations for a straightforward installation process.

• High-Flow HCT Intake system improves induction sound and reduces pressure drop
• Front Mount Intercooler (FMIC) in Silver finish for optimized cooling capacity
• Direct-fit hardware for simplified installation on factory mounting points
• Manufacturer Part Number: FOR0100020SL

Fits 2021-2022 Ford F-150 Raptor models.

The Cobb Stage 1+ Redline Carbon Fiber Power Package (FOR010001P-RED) is a comprehensive performance upgrade designed to optimize airflow and engine calibration for the third-generation Raptor. This bundle pairs the Accessport V3 tuning interface with the high-flow Redline Carbon Fiber intake system, providing a significant increase in power and torque without requiring internal engine modifications. The carbon fiber construction offers superior heat resistance and a premium aesthetic under the hood, while the intake design reduces turbulence and pressure drop.

• Accessport V3: Features pre-loaded Stage 1+ calibrations designed for the Redline intake.
• Redline Carbon Fiber Intake: Constructed from high-quality carbon fiber with a gloss finish to reduce weight and manage intake temperatures.
• High-Flow Filter: Washable, reusable pleated cotton media for increased surface area and filtration efficiency.
• Direct Fit: Bolts to factory mounting locations for a clean, professional installation.
• Complete Hardware: Includes all necessary silicone couplers, clamps, and brackets for a seamless install.
• Manufacturer Part Number: FOR010001P-RED

Fits 2021-2022 Ford F-150 Raptor.

The Cobb Stage 1+ Power Package is a complete performance solution designed to optimize the power delivery and induction efficiency of your Gen 3 Raptor. This package combines the industry-leading Accessport V3 with a high-flow intake system, allowing your engine to breathe better while recalibrating the ECU for increased power and torque. The result is a more responsive driving experience with improved mid-range pull and smoother throttle mapping, all without the need for internal engine modifications.

• Accessport V3 handheld tuner with pre-loaded off-the-shelf (OTS) maps
• High-flow intake system reduces restriction and increases induction volume
• Simple bolt-on installation using factory mounting points
• Real-time monitoring for up to six engine parameters
• Ability to read and clear diagnostic trouble codes (DTCs)
• Manufacturer Part Number: FOR010001P

Fits 2017-2019 Ford F-150 Ecoboost (3.5L).

The Cobb Stage 2 Power Package is a comprehensive performance upgrade designed to optimize both engine and transmission performance. This system centers on the Accessport V3 with integrated TCM (Transmission Control Module) support, allowing for simultaneous tuning of the ECU and the 10-speed automatic transmission. By addressing the primary restriction points in the intake and cooling systems, this package ensures consistent power delivery and improved thermal management under load.

This package features a silver front-mount intercooler designed to bolt directly into the factory location, providing significantly more core volume to reduce charge air temperatures without requiring extensive modifications. The included high-flow intake components improve airflow efficiency, while the calibrated maps provide a significant increase in torque and horsepower across the rev range.

• Accessport V3: Handheld programmer with ECU and TCM tuning capabilities.
• Intercooler: High-efficiency silver core, mounts in factory location.
• TCM Support: Optimized shift points and firmer gear engagement.
• Intake: High-flow design for improved induction volume.
• MPN: FOR0060S20SL-TCM

Fits 2017-2019 Ford F-150 (3.5L) EcoBoost models.

The Cobb Stage 2 Power Package provides a comprehensive performance upgrade by combining hardware and software optimizations. This system includes the Accessport V3 for engine and Transmission Control Module (TCM) tuning, paired with a high-efficiency silver finish intercooler to maintain lower intake air temperatures during heavy load or spirited driving. By integrating TCM support, this package refines shift points and firmness to better manage the increased power and torque of the 3.5L EcoBoost engine.

• Accessport V3: Handheld programmer for flashing ECU and TCM maps.
• Silver Intercooler: Enhanced cooling capacity over the factory unit for consistent performance.
• Transmission Tuning: Optimized shift logic for the 10-speed transmission.
• Bolt-on Installation: Replaces restrictive factory components with high-flow hardware.
• Part Number: FOR0060020SL-TCM

Fits 2017-2019 Ford F-150 (3.5L).

The Cobb Stage 1+ Power Package is a comprehensive tuning solution designed to unlock the performance potential of the 3.5L EcoBoost engine and its 10-speed transmission. This package provides an easy-to-use interface for flashing calibrated maps that optimize boost, ignition timing, and fuel delivery. By including Transmission Control Module (TCM) support, this kit also refines shift schedules and firmness, ensuring the drivetrain can effectively manage the increased power output.

• Integrated ECU and TCM tuning for enhanced engine and transmission performance
• Refined shift logic for the 10-speed automatic transmission
• Real-time gauge monitoring and high-speed data logging
• Ability to read and clear diagnostic trouble codes (DTCs)
• Includes all hardware necessary for installation and flashing
• Manufacturer Part Number: FOR006001P-TCM

Designed for the Ford F-150 EcoBoost Raptor and Limited, the Cobb Stage 2 Power Package is a comprehensive performance solution that optimizes induction and thermal management. This kit is engineered to maximize the potential of the EcoBoost platform by improving airflow and significantly reducing intake air temperatures, which prevents power loss due to heat soak during spirited driving or towing.

• Features a high-efficiency intercooler in a silver finish, designed to mount directly into the factory location for a clean installation.
• Optimizes the engine's breathing by replacing restrictive factory components with higher-flow intake hardware.
• Engineered specifically for the Raptor and Limited trim levels to ensure precise fitment and reliable performance gains.
• Utilizes factory mounting points to maintain structural integrity and OE-like aesthetics.
• Manufacturer Part Number: FOR0050S20SL