Fits 2006-2009 Pontiac Solstice and Saturn Sky (L4-2.4L).

The K&N 69-Series Typhoon air intake system is a free-flowing, mandrel-bent aluminum tube induction system designed to reduce intake restriction and streamline airflow to the engine. By replacing the restrictive factory air filter and intake housing, this short ram system provides a more direct path for air, resulting in improved throttle response and engine sound. The intake tube features a durable silver powder-coated finish for a clean look under the hood.

This system comes equipped with an oversized, conical K&N High-Flow Air Filter featuring oiled cotton media. This filter is washable and reusable, capable of going up to 100,000 miles between services under normal highway driving conditions. A custom-fit heat shield is included to help protect the intake air from high engine bay temperatures, ensuring a cooler charge for the combustion chamber.

• Mandrel-bent aluminum intake tube with silver powder-coated finish
• Includes washable/reusable K&N High-Flow Air Filter (oiled cotton media)
• Custom heat shield isolates filter from engine heat
• Direct bolt-on installation using factory mounting points
• Manufacturer Part Number: 69-8432TS

Fits 2018-2020 Subaru WRX Base, Limited, and Premium models (2.0L).

The K&N Typhoon air intake system is engineered to replace the restrictive factory air filter and intake housing, providing a less obstructive path for airflow to the turbocharger. This system utilizes a free-flowing, mandrel-bent aluminum intake tube to smooth and straighten airflow, allowing the engine to inhale a larger volume of air for improved throttle response and acceleration. The intake tube features a durable textured black powder-coated finish and is designed to accommodate the factory mass air flow (MAF) sensor.

This performance induction kit includes an oversized, cone-shaped K&N high-flow air filter with a black rubber top, which can go up to 100,000 miles between cleanings under normal highway driving conditions. A custom heat shield is provided to isolate the filter from engine heat, drawing cooler air into the system. Installation is a straightforward bolt-on process using existing factory mounting points and typically takes 90 minutes or less with basic hand tools.

• Mandrel-bent aluminum intake tube with textured black powder-coat finish
• Oversized high-flow oiled cotton gauze air filter
• Custom heat shield to block engine bay heat
• Compatible with factory MAF sensor
• Replaces OE part number components for improved acoustics and power
• Backed by the K&N Million Mile Limited Warranty
• Manufacturer Part Number: 69-8011TTK

The K&N Typhoon Performance Air Intake System replaces the restrictive factory air box and intake tubing to provide a smoother, more direct path for airflow. This short ram system utilizes a mandrel-bent aluminum intake tube to increase oxygen delivery to your engine, resulting in improved throttle response and a more aggressive engine sound. Every Typhoon system is engineered to provide a guaranteed increase in horsepower and torque.

Protection is handled by an oversized, conical High-Flow Air Filter featuring oiled cotton media. This filter is washable and reusable, capable of going up to 100,000 miles between services under normal highway driving conditions. A custom heat shield is included to help isolate the intake air from the high temperatures of the engine bay.

• Mandrel-bent aluminum intake tube optimizes airflow velocity
• Washable, reusable High-Flow Air Filter with oiled cotton media
• Custom heat shield helps maintain lower intake air temperatures
• Direct bolt-on installation typically completed in 90 minutes or less
• Will not void vehicle warranty
• K&N Million Mile Limited Warranty
• Manufacturer Part Number: 69-8010TTK

Fits 2018-2021 Subaru WRX STI models equipped with the H4-2.5L engine. This K&N Typhoon performance intake system is engineered to replace the restrictive factory air box and intake tubing to provide a smoother, less obstructed path for airflow.

Built around a mandrel-bent aluminum intake tube, this system reduces turbulence and increases the volume of air reaching your engine. It features an oversized, conical High-Flow Air Filter made from oiled cotton media, providing high airflow while maintaining critical engine protection. The filter is washable and reusable, capable of going up to 100,000 miles between cleanings under normal highway conditions. A custom heat shield is included to help isolate the intake air from high under-hood temperatures, ensuring a cooler, denser intake charge.

• Mandrel-bent aluminum intake tube for improved flow
• Oversized, washable High-Flow Air Filter (oiled cotton)
• Includes custom heat shield to block engine bay heat
• Designed for straightforward installation in approximately 90 minutes
• Manufacturer Part Number: 69-8009TWR
• Backed by the K&N Million Mile Limited Warranty

Fits 2015-2017 Subaru WRX STI (2.5L).

The K&N Typhoon Performance Air Intake System is designed to provide a guaranteed increase in horsepower and torque by replacing the restrictive factory air filter and intake housing. This short ram system features a red powder-coated, mandrel-bent aluminum intake tube that improves airflow and engine bay aesthetics. To maintain low intake temperatures, a custom heat shield is included to isolate the air filter from the heat of the engine compartment.

This system utilizes a K&N High-Flow Air Filter featuring oiled cotton filter media. The oversized conical design allows for extended service intervals of up to 100,000 miles under normal highway driving conditions. The entire kit is designed for a straightforward installation, typically completed in 90 minutes or less using common hand tools.

• Mandrel-bent aluminum intake tube with red finish
• Includes a washable, reusable oiled cotton High-Flow Air Filter
• Custom heat shield included to reduce intake air temperatures
• Manufacturer Part Number: 69-8007TWR
• Back by the K&N Million Mile Limited Warranty

Fits 2015-2017 Subaru WRX Base, Limited, and Premium models.

The K&N 69-8006TTK Typhoon Performance intake system replaces the restrictive factory air filter and air intake housing on your 2015-2017 Subaru WRX. This system features a mandrel-bent aluminum intake tube finished in a textured black powder coat, designed to provide a more direct path for airflow into the turbocharger. By reducing air path restriction and turbulence, this intake improves throttle response and induction sound.

Included is a K&N High-Flow Air Filter made from oiled cotton media. The oversized conical design offers high surface area for extended service intervals, capable of going up to 100,000 miles between cleanings under normal highway driving conditions. A custom-fit heat shield is included to help isolate the intake air from engine bay heat, ensuring cooler, denser air enters the system. This bolt-on kit typically installs in 90 minutes or less using factory mounting points.

• MPN: 69-8006TTK
• Tube Material: Mandrel-bent aluminum
• Finish: Textured black powder coat
• Filter Media: Washable, reusable oiled cotton
• Installation: Bolt-on, typically under 90 minutes
• Warranty: K&N Million Mile Limited Warranty

Fits 2008-2014 Subaru Impreza WRX and WRX STI (2.5L).

The K&N 69-8005TWR Typhoon performance intake system is a free-flowing, mandrel-bent aluminum tube induction system designed to replace the restrictive factory air filter and intake housing. By reducing airflow restriction and smoothing the intake path, this system allows your engine to breathe more efficiently. The intake features a durable wrinkle red powder-coated finish and includes a custom-fit heat shield to protect the intake air from high engine bay temperatures.

• Mandrel-bent aluminum intake tube ensures consistent diameter for optimized airflow
• Equipped with an oversized K&N High-Flow Air Filter featuring washable oiled cotton media
• Filter lasts up to 100,000 miles before servicing is required under normal driving conditions
• Direct bolt-on design installs in approximately 90 minutes using factory mounting points
• Complete kit includes intake tube, filter, heat shield, and all necessary hardware
• Manufacturer Part Number: 69-8005TWR

Fits select 2008-2014 Subaru Impreza models including WRX, WRX Limited, WRX Premium, and 2.5i variants. This K&N Typhoon air intake system is designed to improve engine performance by replacing the restrictive factory air box and intake tubing with a free-flowing, mandrel-bent aluminum tube. By reducing intake path restriction, this system allows your engine to inhale a larger volume of air, resulting in a guaranteed increase in horsepower and torque.

• Performance Tubing: Mandrel-bent aluminum intake tube finished in a durable textured black powder coat for heat resistance and aesthetics.
• High-Flow Filtration: Includes an oversized conical air filter with oiled cotton media, designed to provide high airflow and excellent filtration for up to 100,000 miles between cleaning.
• Thermal Protection: Comes with a custom-engineered heat shield that helps isolate the filter from high engine bay temperatures, ensuring a cooler, denser air charge.
• Simple Installation: Designed to bolt onto factory mounting points, typically requiring less than 90 minutes with standard hand tools.

Technical Specifications:
• Manufacturer Part Number: 69-8004TTK
• Tube Material: Mandrel-bent aluminum
• Finish: Textured Black
• Filter Type: Washable, reusable oiled cotton media
• Warranty: K&N Million Mile Limited Warranty

Fits select 2005-2009 Subaru Legacy models including GT, GT Limited, spec.B, and 2.5i Special Edition.

The K&N 69 Series Typhoon performance intake system (MPN: 69-8003TFK) is designed to improve engine breathing by replacing the factory air box with a high-flow induction setup. This short ram intake features a mandrel-bent aluminum intake tube with a black finish, providing a smooth, low-restriction path for air to reach the engine. To help maintain lower intake temperatures, the system includes a custom heat shield designed to isolate the air filter from the high-heat environment of the engine bay.

• Mandrel-bent aluminum intake tube with a durable black finish
• Includes an oversized, washable High-Flow Air Filter with oiled cotton media
• Service intervals up to 100,000 miles under normal highway driving conditions
• Engineered for easy installation in typically less than 90 minutes
• Pairs with a custom heat shield to block engine heat
• Backed by the K&N Million Mile Limited Warranty

Fits 2004-2006 Subaru Forester XT, XT Limited, and XT Premium (2.5L).

The K&N 69 Series Typhoon Performance Intake System (69-8002TS) is a free-flowing, mandrel-bent aluminum tube air induction system designed to replace the restrictive factory air filter and intake housing. This short ram system is engineered to provide a smooth, low-restriction path for airflow, improving throttle response and engine sound. The system features a silver powder-coated finish for durability and a professional under-hood appearance.

Each kit includes a washable, reusable conical High-Flow Air Filter made from oiled cotton media. This filter is designed for long service intervals, capable of lasting up to 100,000 miles between cleanings under normal highway conditions. To maintain cooler intake temperatures, a vehicle-specific heat shield is included to help isolate the filter from engine bay heat. This system is designed for a straightforward installation that typically takes less than 90 minutes using standard tools.

• Mandrel-bent aluminum intake tube with silver powder-coated finish
• Includes washable, reusable oiled cotton High-Flow Air Filter
• Vehicle-specific heat shield protects intake air from engine heat
• Direct bolt-on installation using factory mounting points
• Manufacturer Part Number: 69-8002TS
• Backed by the K&N Million Mile Limited Warranty

Fits 2002-2007 Subaru Impreza (WRX, WRX STI, 2.5i, and Outback Sport).

The K&N 69-8001TWR Typhoon intake system is engineered to provide a guaranteed increase in horsepower and torque by replacing the restrictive factory air filter and intake housing. This short ram system utilizes a mandrel-bent aluminum intake tube finished in a durable wrinkle red powder coat, ensuring smooth airflow and a custom look under the hood. To maintain lower intake air temperatures, the system includes a custom-fit heat shield designed to protect the filter from engine bay heat soak.

• High-Flow Filtration: Includes a washable, reusable conical filter featuring oiled cotton media for superior airflow and engine protection.
• Long Service Life: The oversized filter design allows for up to 100,000 miles between services under normal highway driving conditions.
• Simplified Installation: Designed to bolt into factory mounting points; the entire system can typically be installed in under 90 minutes.
• Premium Construction: Mandrel-bent aluminum tubing maintains consistent diameters for optimized velocity.

Technical Specifications:

• Manufacturer Part Number: 69-8001TWR
• System Type: Short Ram Intake
• Tube Material: Mandrel-Bent Aluminum
• Tube Finish: Wrinkle Red Powder Coat
• Filter Media: Oiled Cotton Gauze
• Warranty: K&N Million Mile Limited Warranty

Fits 2023-2025 Nissan Z (3.0L) models including Sport, Performance, Proto Spec, and Nismo.

The K&N 69 Series Typhoon cold air intake system is engineered to deliver a guaranteed increase in horsepower and torque by replacing the restrictive factory air box and intake path. This performance-oriented system features mandrel-bent aluminum intake tubes designed to provide a smooth, low-restriction path for airflow into the engine.

Each kit is equipped with K&N High-Flow Air Filters featuring oiled cotton media. These filters are washable and reusable, providing high airflow while maintaining excellent engine protection. The system is designed for a straightforward installation using existing factory mounting points and is engineered to work without voiding your vehicle warranty.

• Mandrel-bent aluminum intake tubes for improved airflow velocity
• Washable, reusable High-Flow Air Filters with oiled cotton media
• Direct bolt-on replacement for factory intake systems
• Precision engineered for the 3.0L V6 engine
• Manufacturer Part Number: 69-7086TC

Fits 2019-2025 Nissan Altima (L4-2.5L).

The K&N 69-7085TS Typhoon Short Ram Intake system is engineered to deliver a guaranteed increase in horsepower and torque by replacing the restrictive factory air filter and intake housing. This performance-oriented system features a mandrel-bent aluminum intake tube that streamlines airflow directly into the engine for improved throttle response and sound.

• High-Flow Filtration: Includes a washable, reusable conical air filter featuring oiled cotton media for superior airflow and engine protection.
• Mandrel-Bent Tubing: The aluminum intake tube is mandrel-bent to maintain a consistent internal diameter, reducing air turbulence compared to factory corrugated plastic.
• Heat Shield Protection: A custom heat shield is included to help isolate the intake air from high engine bay temperatures, ensuring a cooler, denser air charge.
• Long-Term Durability: The oversized filter design allows for up to 100,000 miles between cleanings under normal highway driving conditions.
• Simple Installation: Designed to bolt on in approximately 90 minutes or less; backed by the K&N Million Mile Limited Warranty.

Fits 2014-2015 Infiniti Q50 Base, Premium, and Sport models (3.7L).

The K&N 69-7083TS Typhoon Series air intake system is a free-flowing, dual-mandrel-bent aluminum tube air induction system designed to replace the restrictive factory air filters and intake housing. This kit provides a lower-restriction path for airflow, improving engine efficiency for your 3.7L V6. The system features two silver powder-coated intake tubes and two oversized conical High-Flow Air Filters made from washable, oiled cotton media. These filters are engineered to provide high airflow and exceptional filtration, with a service interval of up to 100,000 miles under normal highway driving conditions.

Designed for a straightforward installation, this short ram intake typically bolts on in 90 minutes or less using factory mounting points. The kit includes custom heat shields to help isolate the intake air from engine bay heat, ensuring a cooler, denser air charge.

• Silver powder-coated mandrel-bent aluminum intake tubes
• Washable and reusable oiled cotton High-Flow Air Filters
• Dual intake configuration specific to the VQ37VHR engine
• Includes custom heat shields to protect against high under-hood temperatures
• Manufacturer Part Number: 69-7083TS
• Backed by the K&N Million Mile Limited Warranty

Fits 2008-2013 Infiniti G37 and 2009-2020 Nissan 370Z (V6-3.7L).

Unlock horsepower and torque gains with the K&N 69 Series Typhoon cold air intake system. This performance-oriented system replaces the restrictive factory air filter and intake housing with a free-flowing, mandrel-bent aluminum intake tube. Designed to reduce atmospheric resistance and straighten airflow, the system delivers a cooler, more oxygen-dense charge to your VQ37VHR engine for improved throttle response and engine sound.

• Performance Tubing: Mandrel-bent aluminum intake tube maintains consistent diameter through bends to maximize airflow.
• High-Flow Filtration: Includes a washable, reusable oiled cotton High-Flow Air Filter designed for up to 100,000 miles of use between cleanings under normal highway conditions.
• Thermal Protection: Integrated heat shield helps isolate the air filter from high engine bay temperatures.
• Straightforward Installation: Engineered as a bolt-on upgrade that typically installs in 90 minutes or less using standard tools.
• Quality Assurance: Backed by the K&N Million Mile Limited Warranty and designed not to void your vehicle warranty.
• Manufacturer Part Number: 69-7078TS

Fits 2007-2008 Nissan 350Z Base, Enthusiast, Grand Touring, Nismo, and Touring models.

The K&N Typhoon 69-7071TS dual short ram intake system is engineered to provide a less restrictive path for air to reach your 350Z's VQ35HR engine. By replacing the restrictive factory air boxes with two mandrel-bent silver aluminum intake tubes and oversized conical filters, this system reduces air path turbulence to improve throttle response and horsepower. Each system is paired with two washable, reusable High-Flow Air Filters featuring oiled cotton filter media, capable of going up to 100,000 miles between services under normal highway driving conditions.

The kit includes custom-fit heat shields to help isolate the air filters from engine bay heat, ensuring cooler air enters the combustion chamber. This system is a direct bolt-on upgrade that typically installs in 90 minutes or less using factory mounting points.

• Dual mandrel-bent aluminum intake tubes with a silver powder-coated finish
• Two washable, reusable K&N High-Flow Air Filters (oiled cotton)
• Custom heat shields included to protect intake air from engine heat
• Direct bolt-on installation with included hardware
• K&N Million Mile Limited Warranty
• Manufacturer Part Number: 69-7071TS

Fits 2013-2018 Nissan Altima models equipped with the 2.5L L4 engine. Replace your restrictive factory air box with the K&N 69 Series Typhoon air intake system (MPN: 69-7064TS) to improve airflow and engine performance.

This system features a mandrel-bent aluminum intake tube finished in silver, designed to provide a smooth path for air to reach your engine. It includes a K&N High-Flow Air Filter with oiled cotton media, which is washable and reusable, capable of lasting up to 100,000 miles between cleanings under normal highway conditions. The kit is rounded out by a custom-designed heat shield that isolates the intake air from engine heat, ensuring a cooler, denser air charge for better combustion.

• Silver powder-coated mandrel-bent aluminum intake tube
• Oversized conical High-Flow Air Filter (oiled cotton)
• Custom heat shield helps maintain lower intake temperatures
• Straightforward bolt-on installation using factory mounting points
• Includes all necessary hardware and clamps
• K&N Million Mile Limited Warranty

Vehicle Fitment:

• 2013-2017 Nissan Altima Base (2.5L)
• 2013-2018 Nissan Altima S (2.5L)
• 2013-2018 Nissan Altima SL (2.5L)
• 2016-2018 Nissan Altima SR (2.5L)
• 2013-2018 Nissan Altima SV (2.5L)

Fits select 2013-2017 Nissan Altima, Pathfinder and Infiniti JX35, QX60 (3.5L V6).

The K&N 69 Series Typhoon Performance Air Intake Kit is a high-flow, mandrel-bent aluminum tube induction system designed to provide a guaranteed increase in horsepower and torque. By replacing the restrictive factory air filter and intake housing, this system provides a smoother, less obstructed path for airflow, resulting in improved throttle response and engine sound. The kit includes a custom heat shield to isolate the intake air from high engine bay temperatures, ensuring a cooler, denser charge reaching the engine.

Each system is paired with a signature K&N High-Flow Air Filter featuring oiled cotton media. This oversized conical filter is washable and reusable, capable of going up to 100,000 miles between services under normal highway driving conditions. Designed for a straightforward installation, the entire system typically bolts on in less than 90 minutes using factory mounting points.

• Manufacturer Part Number: 69-7063TTK
• System Type: Cold Air Intake
• Tube Material: Mandrel-Bent Aluminum
• Filter Media: Oiled Cotton (Washable/Reusable)
• Service Interval: Up to 100,000 miles before cleaning
• Warranty: K&N Million Mile Limited Warranty

Vehicle Fitment:

• 2013-2017 Nissan Altima (3.5L S, SL, SR, SV)
• 2013-2016 Nissan Pathfinder (3.5L Platinum, S, SL, SV)
• 2013 Infiniti JX35 (3.5L Base)
• 2014-2015 Infiniti QX60 (3.5L Base)

Fits 2007-2012 Nissan Altima SE, SL, and SR models (3.5L).

The K&N 69-7062TTK Typhoon short ram intake system is designed to replace the restrictive factory air filter and intake housing, providing a more direct path for airflow to your engine. This system features a mandrel-bent aluminum intake tube that improves throttle response and engine sound while maintaining precise fitment. It comes equipped with a washable, reusable High-Flow Air Filter featuring oiled cotton media for superior filtration and performance.

• Mandrel-bent aluminum intake tube for optimized airflow
• Washable, reusable conical air filter with oiled cotton media
• Up to 100,000 miles between services under normal highway conditions
• Integrated heat shield helps protect intake air from engine bay heat
• Simple bolt-on installation typically completed in 90 minutes or less
• Will not void vehicle warranty and backed by a Million Mile Limited Warranty
• Manufacturer Part Number: 69-7062TTK

Fits 2007-2013 Nissan Altima Base, Hybrid, S, SL, and SV (2.5L).

The K&N 69-7061TS Typhoon cold air intake system is engineered to increase horsepower and torque by replacing the restrictive factory air box and intake tubing. This short ram system features a mandrel-bent aluminum intake tube with a silver powder-coated finish, designed to smooth and straighten airflow into the engine. The system includes a custom heat shield to isolate the intake air from engine bay heat, ensuring a cooler, denser intake charge for improved throttle response.

• High-Flow Filtration: Includes a washable, reusable conical filter featuring oiled cotton media for high airflow and excellent engine protection.
• Long Service Interval: The oversized filter is designed to go up to 100,000 miles between cleanings under normal highway driving conditions.
• Mandrel-Bent Tubing: The silver-finished aluminum tube maintains consistent diameter through every bend to reduce turbulence.
• Direct Fit: Designed to bolt into factory mounting points; includes all necessary hardware for an installation that typically takes 90 minutes or less.
• Manufacturer Part Number: 69-7061TS

Backed by the K&N Million Mile Limited Warranty, this intake system is a reliable performance upgrade that will not void your vehicle warranty.

Fits 2013-2019 Nissan Sentra models with the 1.8L L4 engine, including S, SL, SR, SV, FE+S, and FE+SV trims.

The K&N 69-7003TTK Typhoon air intake system is a free-flowing, mandrel-bent aluminum tube induction system designed to replace the restrictive factory air filter and intake housing. This short ram intake features a custom heat shield to isolate the intake air from engine heat, ensuring a cooler, denser air charge for improved performance. The system includes an oversized, conical High-Flow Air Filter featuring oiled cotton media that provides excellent filtration and can go up to 100,000 miles between services under normal highway driving conditions.

• Mandrel-bent aluminum intake tube for smooth, laminar airflow
• Washable and reusable oiled cotton air filter media
• Custom heat shield helps protect intake air from high engine bay temperatures
• Simple bolt-on installation typically completed in less than 90 minutes
• Million Mile Limited Warranty
• Manufacturer Part Number: 69-7003TTK

Fits 2009-2023 Nissan Maxima (3.5L).

The K&N Typhoon Series performance air intake system is a free-flowing, mandrel-bent aluminum tube induction system designed to replace the restrictive factory air filter and air intake housing. By streamlining the path of airflow to the 3.5L V6 engine, this short ram intake provides a measurable increase in horsepower and torque.

This system features an oversized, conical K&N High-Flow Air Filter with oiled cotton media, engineered to provide high airflow while maintaining exceptional engine protection. The washable, reusable filter is designed to go up to 100,000 miles between services under normal highway driving conditions. A custom heat shield is included to help isolate the intake air from high engine bay temperatures, ensuring a cooler air charge reaches the engine.

• Mandrel-bent aluminum intake tube for improved airflow velocity and volume
• Includes a washable, reusable oiled cotton High-Flow Air Filter
• Custom heat shield helps protect intake air from engine heat
• Direct bolt-on design for a straightforward installation process
• K&N Million Mile Limited Warranty
• Manufacturer Part Number: 69-7002TTK

Fits select 2008-2015 Mitsubishi Lancer models (Evolution GSR, Evolution MR, Ralliart, DE, ES, and ES Sportback).

The K&N 69-6546TWR Typhoon air intake system is a free-flowing, mandrel-bent aluminum tube induction system designed to replace the restrictive factory air filter and intake housing. This high-performance system features a Wrinkle Red powder-coated finish and is engineered to reduce intake restriction, allowing your engine to breathe more efficiently. By shielding the air filter from high engine bay temperatures with an included custom heat shield, the system delivers cooler, denser air to the intake for improved combustion.

Every Typhoon intake is equipped with a washable, reusable conical High-Flow Air Filter featuring oiled cotton filter media. This oversized filter design provides high airflow and excellent filtration, lasting up to 100,000 miles before servicing is required under normal highway driving conditions. The system utilizes factory mounting points for a straightforward installation that typically takes less than 90 minutes.

• MPN: 69-6546TWR
• Finish: Wrinkle Red powder-coated aluminum
• Tube Type: Mandrel-bent for smooth, laminar airflow
• Filter Type: Washable, reusable oiled cotton media
• Included Hardware: Custom heat shield and all necessary mounting components
• Service Interval: Up to 100,000 miles between cleanings

Fits 2008-2014 Mitsubishi Lancer DE, ES, GT, GTS, SE, Ralliart, and Evolution models (L4-2.0L).

The K&N Typhoon Performance Intake System is designed to eliminate airflow restriction and turbulence in your factory induction system. By replacing the restrictive OEM air box and intake path with a silver powder-coated, mandrel-bent aluminum intake tube, this short ram system provides a smoother, more direct path for oxygen to reach your engine. The result is a guaranteed increase in horsepower and improved throttle response across the RPM range.

This system features an oversized conical High-Flow Air Filter made from K&N’s signature oiled cotton media. The filter is washable and reusable, capable of going up to 100,000 miles between services under normal driving conditions. To help maintain lower intake air temperatures, a custom-designed heat shield is included to isolate the filter from engine bay heat. The entire kit is engineered for a straightforward installation that typically takes less than 90 minutes using standard hand tools.

• Silver mandrel-bent aluminum intake tube for optimized airflow
• Washable, reusable oiled cotton High-Flow Air Filter
• Includes custom heat shield to protect against high engine bay temperatures
• Million Mile Limited Warranty
• Will not void vehicle warranty
• Manufacturer Part Number: 69-6544TS

Fits 2002-2006 Mitsubishi Lancer models (including ES, Evolution, LS, OZ Rally, Ralliart, and SE).

The K&N 69-6540TB Typhoon air intake system is a performance-oriented induction kit designed to replace the restrictive factory air filter and intake housing. This short ram system utilizes a free-flowing, mandrel-bent aluminum tube to smooth and straighten airflow, allowing your engine to inhale a larger volume of air for improved throttle response and acceleration throughout the RPM range.

The intake tube features a durable blue powder-coat finish and is engineered to accommodate the factory mass air sensor. It includes a replacement silicone crankcase vent hose and an oversized cone-shaped high-flow air filter with a black rubber top. This reusable filter can go up to 100,000 miles between cleanings under normal driving conditions. Installation is straightforward, typically taking 90 minutes or less using existing factory mounting points.

• Mandrel-bent aluminum intake tube with blue powder-coat finish
• Oversized high-flow air filter (washable and reusable)
• Silicone crankcase vent hose included
• Retains factory mass air sensor
• Direct bolt-on installation using factory mounting points
• Manufacturer Part Number: 69-6540TB
• K&N Million Mile Limited Warranty

Fits 2006-2011 Mitsubishi Eclipse GT, SE, and Spyder GT models equipped with the 3.8L V6 engine.

The K&N 69-Series Typhoon air intake system is a free-flowing, mandrel-bent aluminum tube induction system designed to provide a guaranteed increase in horsepower and torque. By replacing the restrictive factory air filter and intake housing, this short ram system provides a direct path for airflow into the engine. The system includes a red powder-coated intake tube and a custom heat shield designed to isolate the air filter from high engine bay temperatures, ensuring cooler, denser air enters the intake.

This kit features a washable, reusable K&N High-Flow Air Filter with oiled cotton media, allowing for up to 100,000 miles between services under normal highway driving conditions. Installation is straightforward and can typically be completed in 90 minutes or less using standard hand tools.

• Red mandrel-bent aluminum intake tube for optimized airflow
• Oversized conical High-Flow Air Filter (washable and reusable)
• Custom heat shield included to block engine heat
• Direct bolt-on installation using factory mounting points
• Manufacturer Part Number: 69-6502TR
• Back by the K&N Million Mile Limited Warranty

Fits 2021-2025 Mazda 3 models (2.5L Turbo).

The K&N 69-6036TC Typhoon cold air intake system is engineered to provide a guaranteed increase in horsepower and torque by streamlining airflow to the engine. This performance intake replaces the restrictive factory air filter and intake tube with a free-flowing, mandrel-bent aluminum tube designed to improve throttle response and engine sound.

Every Typhoon system is paired with a signature K&N High-Flow Air Filter. This washable, reusable filter features oiled cotton media to provide excellent filtration and long service intervals. The silver powder-coated finish provides a clean, professional look under the hood while resisting heat soak.

• Silver mandrel-bent aluminum intake tube for reduced turbulence
• Includes washable, reusable High-Flow Air Filter (oiled cotton media)
• Replaces factory air filter and intake housing
• Direct bolt-on installation using factory mounting points
• Manufacturer Part Number: 69-6036TC

Fits 2019-2025 Mazda 3 models equipped with the L4-2.5L engine. This K&N Typhoon air intake system is engineered to replace the restrictive factory air filter and intake housing to provide a guaranteed increase in horsepower and torque.

• Mandrel-Bent Tubing: Features a mandrel-bent aluminum intake tube designed to smooth and straighten airflow into the engine.
• High-Flow Filtration: Includes a washable, reusable K&N High-Flow Air Filter featuring oiled cotton filter media for superior protection and airflow.
• Performance Results: Specifically tuned and dyno-tested to improve throttle response and engine sound.
• Direct Fit: Designed to bolt into factory mounting points; typically installs in 90 minutes or less with basic hand tools.
• Warranty Safe: Engineered to work with factory electronics and will not void the vehicle warranty.

Manufacturer Part Number: 69-6035TC

Fits 2018-2022 Mazda 6, CX-5, and CX-9 models equipped with the 2.5L engine.

The K&N 69-6034TS Typhoon air intake system is engineered to reduce intake restriction by replacing the restrictive factory air filter and air intake housing. This system features a mandrel-bent aluminum intake tube designed to provide a smooth, laminar flow of air directly into the engine's throttle body. It includes a custom heat shield to isolate the intake air from engine bay heat, ensuring a cooler, denser charge for improved combustion.

Central to this system is the K&N High-Flow Air Filter, constructed with oiled cotton media for superior filtration and airflow. The oversized conical design allows for extended service intervals, capable of going up to 100,000 miles before cleaning is required under normal highway conditions. This bolt-on upgrade utilizes factory mounting points and can typically be installed in under 90 minutes using standard hand tools.

• Manufacturer Part Number: 69-6034TS
• Mandrel-bent aluminum intake tube for optimized airflow
• Washable and reusable oiled cotton High-Flow Air Filter
• Custom heat shield helps protect intake air from high engine temperatures
• Direct bolt-on installation with no tuning required
• K&N Million Mile Limited Warranty

Fits 2013-2018 Mazda 3 (2.0L).

The K&N 69 Series Typhoon performance intake system is a free-flowing, mandrel-bent aluminum tube air induction system designed to replace the restrictive factory air filter and intake housing. By reducing airflow restriction and managing intake temperatures, this system provides a guaranteed increase in horsepower and torque for your Mazda.

• High-Flow Air Filter: Includes an oversized, conical washable filter with oiled cotton media that can go up to 100,000 miles between services under normal highway conditions.
• Mandrel-Bent Tubing: The aluminum intake tube is engineered to provide a smooth, consistent path for airflow into the engine.
• Thermal Management: A custom heat shield is included to help protect the intake air from high engine bay temperatures.
• Direct Fit: Designed for an easy installation in approximately 90 minutes or less using basic hand tools.
• Confidence: Backed by the K&N Million Mile Limited Warranty and will not void your vehicle warranty.

Part Number: 69-6033TTK